[ Upstream commit c57e5dccb06decf3cb6c272ab138c033727149b5 ]
__cmpxchg_u8() had been added (initially) for the sake of
drivers/phy/ti/phy-tusb1210.c; the thing is, that drivers is
modular, so we need an export
Fixes: b344d6a83d "parisc: add support for cmpxchg on u8 pointers"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0568b6f0d863643db2edcc7be31165740c89fa82 ]
IPv6 checksum tests with unaligned addresses on 64-bit builds result
in unexpected failures.
Expected expected == csum_result, but
expected == 46591 (0xb5ff)
csum_result == 46381 (0xb52d)
with alignment offset 1
Oddly enough, the problem disappeared after adding test code into
the beginning of csum_ipv6_magic().
As it turns out, the 'sum' parameter of csum_ipv6_magic() is declared as
__wsum, which is a 32-bit variable. However, it is treated as 64-bit
variable in the 64-bit assembler code. Tests showed that the upper 32 bit
of the register used to pass the variable are _not_ cleared when entering
the function. This can result in checksum calculation errors.
Clearing the upper 32 bit of 'sum' as first operation in the assembler
code fixes the problem.
Acked-by: Helge Deller <deller@gmx.de>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b75b12d70506e31fc02356bbca60f8d5ca012d0 ]
hppa 64-bit systems calculates the IPv6 checksum using 64-bit add
operations. The last add folds protocol and length fields into the 64-bit
result. While unlikely, this operation can overflow. The overflow can be
triggered with a code sequence such as the following.
/* try to trigger massive overflows */
memset(tmp_buf, 0xff, sizeof(struct in6_addr));
csum_result = csum_ipv6_magic((struct in6_addr *)tmp_buf,
(struct in6_addr *)tmp_buf,
0xffff, 0xff, 0xffffffff);
Fix the problem by adding any overflows from the final add operation into
the calculated checksum. Fortunately, we can do this without additional
cost by replacing the add operation used to fold the checksum into 32 bit
with "add,dc" to add in the missing carry.
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4408ba75e4ba80c91fde7e10bccccf388f5c09be ]
Calculating the IPv6 checksum on 32-bit systems missed overflows when
adding the proto+len fields into the checksum. This results in the
following unit test failure.
# test_csum_ipv6_magic: ASSERTION FAILED at lib/checksum_kunit.c:506
Expected ( u64)csum_result == ( u64)expected, but
( u64)csum_result == 46722 (0xb682)
( u64)expected == 46721 (0xb681)
not ok 5 test_csum_ipv6_magic
This is probably rarely seen in the real world because proto+len are
usually small values which will rarely result in overflows when calculating
the checksum. However, the unit test code uses large values for the length
field, causing the test to fail.
Fix the problem by adding the missing carry into the final checksum.
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2abae8f0b638c31bb9799d9dd847306e0d005bd ]
IP checksum unit tests report the following error when run on hppa/hppa64.
# test_ip_fast_csum: ASSERTION FAILED at lib/checksum_kunit.c:463
Expected ( u64)csum_result == ( u64)expected, but
( u64)csum_result == 33754 (0x83da)
( u64)expected == 10946 (0x2ac2)
not ok 4 test_ip_fast_csum
0x83da is the expected result if the IP header length is 20 bytes. 0x2ac2
is the expected result if the IP header length is 24 bytes. The test fails
with an IP header length of 24 bytes. It appears that ip_fast_csum()
always returns the checksum for a 20-byte header, no matter how long
the header actually is.
Code analysis shows a suspicious assembler sequence in ip_fast_csum().
" addc %0, %3, %0\n"
"1: ldws,ma 4(%1), %3\n"
" addib,< 0, %2, 1b\n" <---
While my understanding of HPPA assembler is limited, it does not seem
to make much sense to subtract 0 from a register and to expect the result
to ever be negative. Subtracting 1 from the length parameter makes more
sense. On top of that, the operation should be repeated if and only if
the result is still > 0, so change the suspicious instruction to
" addib,> -1, %2, 1b\n"
The IP checksum unit test passes after this change.
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4603fbaa76b5e703b38ac8cc718102834eb6e330 ]
Use add,l to avoid clobbering the C/B bits in the PSW.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 250f5402e636a5cec9e0e95df252c3d54307210f ]
Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:
arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
82 | int ftrace_enable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
88 | int ftrace_disable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 735ae74f73e55c191d48689bd11ff4a06ea0508f upstream.
When running with narrow firmware (64-bit kernel using a 32-bit
firmware), extend PDC addresses into the 0xfffffff0.00000000
region instead of the 0xf0f0f0f0.00000000 region.
This fixes the power button on the C3700 machine in qemu (64-bit CPU
with 32-bit firmware), and my assumption is that the previous code was
really never used (because most 64-bit machines have a 64-bit firmware),
or it just worked on very old machines because they may only decode
40-bit of virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e5f3e299a2b1e9c3ece24a38adfc089aef307e8a upstream.
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 166b0110d1ee53290bd11618df6e3991c117495a upstream.
When calculating the pfn for the iitlbt/idtlbt instruction, do not
drop the upper 5 address bits. This doesn't seem to have an effect
on physical hardware which uses less physical address bits, but in
qemu the missing bits are visible.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a406b8b424fa01f244c1aab02ba186258448c36b upstream.
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 591d2108f3 ("parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines")
Cc: <stable@vger.kernel.org> # v6.0+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914988e099 upstream.
Back in 2005, Kyle McMartin removed the 16-byte alignment for
ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke
spinlocks on pre PA8800 processors. The main symptom was random
faults in mmap'd memory (e.g., gcc compilations, etc).
Unfortunately, the errata for this ldcw change is lost.
The issue is the 16-byte alignment required for ldcw semaphore
instructions can only be reduced to natural alignment when the
ldcw operation can be handled coherently in cache. Only PA8800
and PA8900 processors actually support doing the operation in
cache.
Aligning the spinlock dynamically adds two integer instructions
to each spinlock.
Tested on rp3440, c8000 and a500.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Link: https://lore.kernel.org/linux-parisc/6b332788-2227-127f-ba6d-55e99ecf4ed8@bell.net/T/#t
Link: https://lore.kernel.org/linux-parisc/20050609050702.GB4641@roadwarrior.mcmartin.ca/
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb3255ee8f ]
Fix this makecheck warning:
drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list'
was not declared. Should it be static?
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4db89524b0 upstream.
Fix the LAN receive and LAN transmit LEDs, which where swapped
up to now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5ba4b3e1 upstream.
The lscpu command is broken since commit cab56b51ec ("parisc: Fix
device names in /proc/iomem") added the PA pathname to all PA
devices, includig the CPUs.
lscpu parses /proc/cpuinfo and now believes it found different CPU
types since every CPU is listed with an unique identifier (PA
pathname).
Fix this problem by simply dropping the PA pathname when listing the
CPUs in /proc/cpuinfo. There is no need to show the pathname in this
procfs file.
Fixes: cab56b51ec ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61235b24b9 upstream
Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5b2a02bca upstream.
We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:
arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined
Delete the duplicate definitions in <asm/assembly.h>.
Also delete the definition of gp, which isn't used anywhere.
Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59fa12646d ]
Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().
When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 61e150fb31 upstream.
Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().
But the current implementation for flush_dcache_page() on parisc
unintentionally re-enables IRQs, which may lead to deadlocks.
Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore()
for the flush_dcache_mmap_*lock() macros instead.
Cc: linux-parisc@vger.kernel.org
Cc: stable@kernel.org # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2028315cf5 upstream.
In case a machine can't power-off itself on system shutdown,
allow the user to reboot it by pressing the RETURN key.
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6888ff04e3 upstream.
The kernel kgdb break instructions should only be handled when running
in kernel context.
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 829632dae8 ]
The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.
Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6e3220ba33 upstream.
Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.
It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.
I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 073352e951 ]
Some architectures and irqchip drivers modify the cpumask returned by
irq_data_get_affinity_mask, usually by copying in to it. This is
problematic for uniprocessor configurations, where the affinity mask
should be constant, as it is known at compile time.
Add and use a setter for the affinity mask, following the pattern of
irq_data_update_effective_affinity. This allows the getter function to
return a const cpumask pointer.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Xen bits
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-7-samuel@sholland.org
Stable-dep-of: feabecaff5 ("genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5d1335dabb upstream.
There is an off-by-one if the printed string includes a new-line
char.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e25498f8c upstream.
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 71bdea6f79 upstream.
Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.
A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b6ae0962b upstream.
Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.
Fixes: cab56b51ec ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 805ce86149 upstream.
The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.
This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
ARCH=parisc -> build 32-bit kernel
ARCH=parisc64 -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).
The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.
Fixes: 3dcfb729b5 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 591d2108f3 ]
If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b18f47f4 ]
This reverts commit b160628e9e.
There is no need any longer to have this sanity check, because the
previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64
only") prevents that CONFIG_64BIT is set if ARCH==parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7ae1f5508d upstream.
The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.
The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.
While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set. But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.
This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.
This patch corrects the bitshift and masking calculation in FR3().
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3dcfb729b5 upstream.
With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:
ARCH=parisc -> 32-bit kernel
ARCH=parisc64 -> 64-bit kernel
This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6431e92fc8 upstream.
For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.
This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cab56b51ec upstream.
Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a1355db36 upstream.
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cf936af790 upstream.
Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8865bbe6ba upstream.
PA-RISC defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7962c08964 upstream.
This reverts commit d97180ad68.
It triggers RCU stalls at boot with a 32-bit kernel.
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b89966bc9 upstream.
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a9fe7fa7d8 ]
This change fixes the following:
1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.
2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since
__patch_text_multiple is often called with interrupts disabled, it is
better to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm. This avoids an extra call.
3) The final call to flush_icache_range is unnecessary.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00b0a2ab8 ]
Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.
This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.
This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.
This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).
V2 adds flush and lpa instruction support to handle_nadtlb_fault.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a972798368 upstream.
Fix 3 bugs:
a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.
b) Tell emulate_ldw() to handle fldw_l as floating point instruction
c) Tell emulate_ldw() to handle ldw_m as integer instruction
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd2288f4a0 upstream.
Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.
On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:
First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.
The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro
Guenter Roeck
John David Anglin
Max Kellermann
Helge Deller
John David Anglin
Thomas Gleixner
Ben Hutchings
Guilherme G. Piccoli
Samuel Holland
Eric W. Biederman
Jason A. Donenfeld