Граф коммитов

28 Коммитов

Автор SHA1 Сообщение Дата
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Takashi Iwai 111b0cdb97 ALSA: seq: Allow the modular sequencer registration
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12 08:43:33 +02:00
Takashi Sakamoto be4e31dab0 ALSA: pcm: tracepoints for refining PCM parameters
When working for devices which support configurable modes for its data
transmission or which consists of several components, developers are
likely to use rules of parameters of PCM substream. However, there's no
infrastructure to assist their work.

In old days, ALSA PCM core got a local 'RULES_DEBUG' macro to debug
refinement of parameters for PCM substream. Although this is merely a
makeshift. With some modifications, we get the infrastructure.

This commit is for the purpose. Refinement of mask/interval type of
PCM parameters is probed as tracepoint events as 'hw_mask_param' and
'hw_interval_param' on existent 'snd_pcm' subsystem.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-07 10:48:56 +02:00
Alexandre Belloni 34ce71a96d ALSA: timer: remove legacy rtctimer
There are no users of rtctimer left. Remove its code as this is the
in-kernel user of the legacy PC RTC driver that will hopefully be removed
at some point.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-25 10:41:46 +02:00
Jie Yang 90bbaf66ee ALSA: timer: add config item to export PCM timer disabling for expert
PCM timer is not always used. For embedded device, we need an interface
to disable it when it is not needed, to shrink the kernel size and
memory footprint, here add CONFIG_SND_PCM_TIMER for it.

When both CONFIG_SND_PCM_TIMER and CONFIG_SND_TIMER is unselected,
about 25KB saving bonus we can get.

Please be noted that when disabled, those stubs who using pcm timer
(e.g. dmix, dsnoop & co) may work incorrectlly.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-16 14:31:38 +02:00
Jie Yang cd6a65036f ALSA: replace CONFIG_PROC_FS with CONFIG_SND_PROC_FS
We may disable proc fs only for sound part, to reduce ALSA
memory footprint. So add CONFIG_SND_PROC_FS and replace the
old CONFIG_PROC_FSs in alsa code.

With sound proc fs disabled, we can save about 9KB memory
size on X86_64 platform.

Signed-off-by: Jie Yang <yang.jie@intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-27 21:25:19 +02:00
Takashi Iwai 181a152a09 Merge branch 'topic/hdmi' into for-next 2015-05-22 16:04:45 +02:00
Russell King 9203dd016a ALSA: pcm: add IEC958 channel status helper
Add a helper to create the IEC958 channel status from an ALSA
snd_pcm_runtime structure, taking account of the sample rate and
sample size.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-22 16:01:47 +02:00
Russell King 838d1631b7 ALSA: pcm: add DRM ELD helper
Add a helper for the EDID like data structure, which is typically passed
from a HDMI adapter to its associated audio driver.  This informs the
audio driver of the capabilities of the attached HDMI sink.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-22 16:01:44 +02:00
Takashi Iwai 1962fcab4e Merge branch 'topic/jack' into for-next 2015-04-28 08:31:31 +02:00
Jie Yang 9058cbe1ee ALSA: jack: implement kctl creating for jack devices
Currently the ALSA jack core registers only input devices for each jack
registered. These jack input devices are not readable by userspace devices
that run as non root. This patch series will implement kctls inside the
core jack part, including kctls creating, status changing report, for both
HD-Audio and ASoC jack. This allows non root userspace to read jack status
and act on it.

This patch adds a new API called snd_jack_add_new_kctl(), which will create
a kcontrol, add it to the card, and also attach it to the jack kctl list.

This patch also initialises the jack kctl list after jack is newed, and
reports kctl status when jack insertion/removal events occur.

snd_jack_new() is updated in the following patches to also support creating
phantom jacks and jack kcontrols. We then remove these duplicated features
from HDA jack and have jack kctls handled by core throughout HDA and ASoC.

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Modified-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reveiwed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-27 21:37:40 +02:00
Takashi Iwai 85d1431807 ALSA: core: Build conditionally and remove superfluous ifdefs
Minor cleanups of Makefile to build some codes conditionally so that
a few ifdefs can be reduced.

Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-24 17:31:07 +02:00
Takashi Iwai f5914908a5 ALSA: pcm: Replace PCM hwptr tracking with tracepoints
ALSA PCM core has a mechanism tracking the PCM hwptr updates for
analyzing XRUNs.  But its log is limited (up to 10) and its log output
is a kernel message, which is hard to handle.

In this patch, the hwptr logging is moved to the tracing
infrastructure instead of its own.  Not only the hwptr updates but
also XRUN and hwptr errors are recorded on the trace log, so that user
can see such events at the exact timing.

The new "snd_pcm" entry will appear in the tracing events:
  # ls -F /sys/kernel/debug/tracing/events/snd_pcm
  enable  filter  hw_ptr_error/  hwptr/  xrun/

The hwptr is for the regular hwptr update events.  An event trace
looks like:

  aplay-26187 [004] d..3  4012.834761: hwptr: pcmC0D0p/sub0: POS: pos=488, old=0, base=0, period=1024, buf=16384

"POS" shows the hwptr update by the explicit position update call and
"IRQ" means the hwptr update by the interrupt,
i.e. snd_pcm_period_elapsed() call.  The "pos" is the passed
ring-buffer offset by the caller, "old" is the previous hwptr, "base"
is the hwptr base position, "period" and "buf" are period- and
buffer-size of the target PCM substream.
(Note that the hwptr position displayed here isn't the ring-buffer
 offset.  It increments up to the PCM position boundary.)

The XRUN event appears similarly, but without "pos" field.
The hwptr error events appear with the PCM identifier and its reason
string, such as "Lost interrupt?".

The XRUN and hwptr error reports on kernel message are still left, can
be turned on/off via xrun_debug proc like before.  But the bit 3, 4, 5
and 6 bits of xrun_debug proc are dropped by this patch.  Also, along
with the change, the message strings have been reformatted to be a bit
more consistent.

Last but not least, the hwptr reporting is enabled only when
CONFIG_SND_PCM_XRUN_DEBUG is set.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-04 14:09:14 +01:00
Takashi Iwai 2d82ea2005 ALSA: Merge memalloc code into snd-pcm module
Instead of keeping a separate snd-page-alloc module, merge into the
core snd-pcm module, as we don't need to keep it as an individual
module due to the drop of page reservation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-01-09 08:12:57 +01:00
Daniel Mack b7ae6f31d8 ALSA: move dmaengine implementation from ASoC to ALSA core
For the PXA DMA rework, we need the generic dmaengine implementation
that currently lives in sound/soc for standalone (non-ASoC) AC'97
support.

Move it to sound/core, and rename the Kconfig symbol.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-15 11:18:09 +01:00
Takashi Iwai 9e4ce164ee Merge branch 'topic/hda' into for-linus 2012-01-12 09:59:18 +01:00
Vinod Koul 40741dd5c2 ALSA: core: add makefile and kconfig file for compress
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-23 10:08:38 +01:00
Takashi Iwai 35be544af3 ALSA: Introduce common helper functions for jack-detection control
Now move the helper function for creating and reporting the jack-detection
to the common place.  The driver that needs this functionality should
select CONFIG_SND_KCTL_JACK kconfig.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:03 +01:00
Takashi Iwai cc6a8acdee ALSA: Fix SG-buffer DMA with non-coherent architectures
Using SG-buffers with dma_alloc_coherent() is often very inefficient
on non-coherent architectures because a tracking record could be
allocated in addition for each dma_alloc_coherent() call.
Instead, simply disable SG-buffers but just allocate normal continuous
buffers on non-supported (currently all but x86) architectures.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-07-08 14:20:20 +02:00
Takashi Iwai bbaf5e9733 ALSA: Add hrtimer backend for ALSA timer interface
Added the hrtimer backend for ALSA timer interface.
It can be used for the sequencer timer source.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-24 18:16:50 +02:00
Mark Brown 0d94e41abe ALSA: Build jack detection
Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:

config SND_FOO
        tristate "..."
        ...
        select SND_JACK if INPUT=y || INPUT=SND

to ensure that the jack detection API is enabled if the input subsystem
is.  If the input subsystem is not enabled then a stub version of the
API is provided.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-07-29 21:32:06 +02:00
Takashi Iwai e922b0028f [ALSA] Move vmaster code to sound core
Move the codes for virtual master controls to sound core part so that
not only hda-intel drivers can use it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:12 +02:00
Jaroslav Kysela c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Takashi Iwai 52a6db82ef [ALSA] Clean up Makefile
Clean up Makefile using xxx- style instead of
ifeq(CONFIG_XXX,y).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai 8f11551b17 [ALSA] Fix build error without CONFIG_HAS_DMA
The recent change of include/asm-generic/dma-mapping-broken.h breaks
the build without CONFIG_HAS_DMA.  This patch is an ad hoc fix.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:05 +02:00
Takashi Iwai e38e0cfa48 [ALSA] Remove kmalloc wrappers
Modules: ALSA Core

Remove kmalloc wrappers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-11-04 13:18:08 +01:00
Al Viro 276bd31ce5 [PATCH] Kconfig fix (ISA_DMA_API and sound/*)
fixed kconfig dependencies on ISA_DMA_API for parts of sound/* that rely
on it.

Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23 18:43:40 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00