Currently, any kernel built with CONFIG_PREEMPTION=y also gets
CONFIG_TASKS_RCU=y, which is not helpful to people trying to build
preemptible kernels of minimal size.
Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of
one form or another, this commit moves from TASKS_RCU deciding when it
should be enabled to the tracing Kconfig options explicitly selecting it.
This allows building preemptible kernels without TASKS_RCU, if desired.
This commit also updates the SRCU-N and TREE09 rcutorture scenarios
in order to avoid Kconfig errors that would otherwise result from
CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency
being met.
[ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ]
Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Since the m->arg_size array can hold up to MAX_BPF_FUNC_ARGS argument
sizes, it's ok that nargs is equal to MAX_BPF_FUNC_ARGS.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220324164238.1274915-1-ytcoode@gmail.com
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
limited to 2 instructions (and typically fewer) on branch targets not starting
with ENDBR. CET-IBT also limits speculation of the next sequential instruction
after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides, as
described above, speculation limits itself.
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEv3OU3/byMaA0LqWJdkfhpEvA5LoFAmI/LI8VHHBldGVyekBp
bmZyYWRlYWQub3JnAAoJEHZH4aRLwOS6ZnkP/2QCgQLTu6oRxv9O020CHwlaSEeD
1Hoy3loum5q5hAi1Ik3dR9p0H5u64c9qbrBVxaFoNKaLt5GKrtHaDSHNk2L/CFHX
urpH65uvTLxbyZzcahkAahoJ71XU+m7PcrHLWMunw9sy10rExYVsUOlFyoyG6XCF
BDCNZpdkC09ZM3vwlWGMZd5Pp+6HcZNPyoV9tpvWAS2l+WYFWAID7mflbpQ+tA8b
y/hM6b3Ud0rT2ubuG1iUpopgNdwqQZ+HisMPGprh+wKZkYwS2l8pUTrz0MaBkFde
go7fW16kFy2HQzGm6aIEBmfcg0palP/mFVaWP0zS62LwhJSWTn5G6xWBr3yxSsht
9gWCiI0oDZuTg698MedWmomdG2SK6yAuZuqmdKtLLoWfWgviPEi7TDFG/cKtZdAW
ag8GM8T4iyYZzpCEcWO9GWbjo6TTGq30JBQefCBG47GjD0csv2ubXXx0Iey+jOwT
x3E8wnv9dl8V9FSd/tMpTFmje8ges23yGrWtNpb5BRBuWTeuGiBPZED2BNyyIf+T
dmewi2ufNMONgyNp27bDKopY81CPAQq9cVxqNm9Cg3eWPFnpOq2KGYEvisZ/rpEL
EjMQeUBsy/C3AUFAleu1vwNnkwP/7JfKYpN00gnSyeQNZpqwxXBCKnHNgOMTXyJz
beB/7u2KIUbKEkSN
=jZfK
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
PMD_SIZE is not available in some special config, e.g. ARCH=arm with
CONFIG_MMU=n. Use bpf_prog_pack of PAGE_SIZE in these cases.
Fixes: ef078600ee ("bpf: Select proper size for bpf_prog_pack")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220321180009.1944482-3-song@kernel.org
module_alloc requires num_online_nodes * PMD_SIZE to allocate huge pages.
bpf_prog_pack uses pack of size num_online_nodes * PMD_SIZE.
OTOH, module_alloc returns addresses that are PMD_SIZE aligned (instead of
num_online_nodes * PMD_SIZE aligned). Therefore, PMD_MASK should be used
to calculate pack_ptr in bpf_prog_pack_free().
Fixes: ef078600ee ("bpf: Select proper size for bpf_prog_pack")
Reported-by: syzbot+c946805b5ce6ab87df0b@syzkaller.appspotmail.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220321180009.1944482-2-song@kernel.org
This reverts commit 97ee4d20ee.
Following change is adding more complexity to bpf_get_func_ip
helper for kprobe_multi programs, which can't be inlined easily.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321070113.1449167-2-jolsa@kernel.org
Replace offsetof(hdr_len) + sizeof(hdr_len) with offsetofend(hdr_len) to
simplify the check for correctness of btf_data_size in btf_parse_hdr()
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220320075240.1001728-1-ytcoode@gmail.com
When CONFIG_DEBUG_INFO_BTF is disabled, bpf_get_btf_vmlinux can return a
NULL pointer. Check for it in btf_get_module_btf to prevent a NULL pointer
dereference.
While kernel test robot only complained about this specific case, let's
also check for NULL in other call sites of bpf_get_btf_vmlinux.
Fixes: 9492450fd2 ("bpf: Always raise reference in btf_get_module_btf")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320143003.589540-1-memxor@gmail.com
Let's say that the caller has storage for num_elem stack frames. Then,
the BPF stack helper functions walk the stack for only num_elem frames.
This means that if skip > 0, one keeps only 'num_elem - skip' frames.
This is because it sets init_nr in the perf_callchain_entry to the end
of the buffer to save num_elem entries only. I believe it was because
the perf callchain code unwound the stack frames until it reached the
global max size (sysctl_perf_event_max_stack).
However it now has perf_callchain_entry_ctx.max_stack to limit the
iteration locally. This simplifies the code to handle init_nr in the
BPF callstack entries and removes the confusion with the perf_event's
__PERF_SAMPLE_CALLCHAIN_EARLY which sets init_nr to 0.
Also change the comment on bpf_get_stack() in the header file to be
more explicit what the return value means.
Fixes: c195651e56 ("bpf: add bpf_get_stack helper")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/30a7b5d5-6726-1cc2-eaee-8da2828a9a9c@oracle.com
Link: https://lore.kernel.org/bpf/20220314182042.71025-1-namhyung@kernel.org
Based-on-patch-by: Eugene Loh <eugene.loh@oracle.com>
Using HPAGE_PMD_SIZE as the size for bpf_prog_pack is not ideal in some
cases. Specifically, for NUMA systems, __vmalloc_node_range requires
PMD_SIZE * num_online_nodes() to allocate huge pages. Also, if the system
does not support huge pages (i.e., with cmdline option nohugevmalloc), it
is better to use PAGE_SIZE packs.
Add logic to select proper size for bpf_prog_pack. This solution is not
ideal, as it makes assumption about the behavior of module_alloc and
__vmalloc_node_range. However, it appears to be the easiest solution as
it doesn't require changes in module_alloc and vmalloc code.
Fixes: 57631054fa ("bpf: Introduce bpf_prog_pack allocator")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220311201135.3573610-1-song@kernel.org
Currently, local storage memory can only be allocated atomically
(GFP_ATOMIC). This restriction is too strict for sleepable bpf
programs.
In this patch, the verifier detects whether the program is sleepable,
and passes the corresponding GFP_KERNEL or GFP_ATOMIC flag as a
5th argument to bpf_task/sk/inode_storage_get. This flag will propagate
down to the local storage functions that allocate memory.
Please note that bpf_task/sk/inode_storage_update_elem functions are
invoked by userspace applications through syscalls. Preemption is
disabled before bpf_task/sk/inode_storage_update_elem is called, which
means they will always have to allocate memory atomically.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: KP Singh <kpsingh@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220318045553.3091807-2-joannekoong@fb.com
Align it with helpers like bpf_find_btf_id, so all functions returning
BTF in out parameter follow the same rule of raising reference
consistently, regardless of module or vmlinux BTF.
Adjust existing callers to handle the change accordinly.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220317115957.3193097-10-memxor@gmail.com
In next few patches, we need a helper that searches all kernel BTFs
(vmlinux and module BTFs), and finds the type denoted by 'name' and
'kind'. Turns out bpf_btf_find_by_name_kind already does the same thing,
but it instead returns a BTF ID and optionally fd (if module BTF). This
is used for relocating ksyms in BPF loader code (bpftool gen skel -L).
We extract the core code out into a new helper bpf_find_btf_id, which
returns the BTF ID in the return value, and BTF pointer in an out
parameter. The reference for the returned BTF pointer is always raised,
hence user must either transfer it (e.g. to a fd), or release it after
use.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220317115957.3193097-2-memxor@gmail.com
Adding support to call bpf_get_attach_cookie helper from
kprobe programs attached with kprobe multi link.
The cookie is provided by array of u64 values, where each
value is paired with provided function address or symbol
with the same array index.
When cookie array is provided it's sorted together with
addresses (check bpf_kprobe_multi_cookie_swap). This way
we can find cookie based on the address in
bpf_get_attach_cookie helper.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-7-jolsa@kernel.org
Adding new link type BPF_LINK_TYPE_KPROBE_MULTI that attaches kprobe
program through fprobe API.
The fprobe API allows to attach probe on multiple functions at once
very fast, because it works on top of ftrace. On the other hand this
limits the probe point to the function entry or return.
The kprobe program gets the same pt_regs input ctx as when it's attached
through the perf API.
Adding new attach type BPF_TRACE_KPROBE_MULTI that allows attachment
kprobe to multiple function with new link.
User provides array of addresses or symbols with count to attach the
kprobe program to. The new link_create uapi interface looks like:
struct {
__u32 flags;
__u32 cnt;
__aligned_u64 syms;
__aligned_u64 addrs;
} kprobe_multi;
The flags field allows single BPF_TRACE_KPROBE_MULTI bit to create
return multi kprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220316122419.933957-4-jolsa@kernel.org
It is the bpf_jit_harden counterpart to commit 60b58afc96 ("bpf: fix
net.core.bpf_jit_enable race"). bpf_jit_harden will be tested twice
for each subprog if there are subprogs in bpf program and constant
blinding may increase the length of program, so when running
"./test_progs -t subprogs" and toggling bpf_jit_harden between 0 and 2,
jit_subprogs may fail because constant blinding increases the length
of subprog instructions during extra passs.
So cache the value of bpf_jit_blinding_enabled() during program
allocation, and use the cached value during constant blinding, subprog
JITing and args tracking of tail call.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220309123321.2400262-4-houtao1@huawei.com
Currently a lot of ftrace code assumes __fentry__ is at sym+0. However
with Intel IBT enabled the first instruction of a function will most
likely be ENDBR.
Change ftrace_location() to not only return the __fentry__ location
when called for the __fentry__ location, but also when called for the
sym+0 location.
Then audit/update all callsites of this function to consistently use
these new semantics.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154318.227581603@infradead.org
Make bpf_lsm_kernel_read_file() as sleepable, so that bpf_ima_inode_hash()
or bpf_ima_file_hash() can be called inside the implementation of this
hook.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-8-roberto.sassu@huawei.com
ima_file_hash() has been modified to calculate the measurement of a file on
demand, if it has not been already performed by IMA or the measurement is
not fresh. For compatibility reasons, ima_inode_hash() remains unchanged.
Keep the same approach in eBPF and introduce the new helper
bpf_ima_file_hash() to take advantage of the modified behavior of
ima_file_hash().
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220302111404.193900-4-roberto.sassu@huawei.com
Use offsetofend() instead of offsetof() + sizeof() to simplify
MIN_BPF_LINEINFO_SIZE macro definition.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/bpf/20220310161518.534544-1-ytcoode@gmail.com
This adds support for running XDP programs through BPF_PROG_RUN in a mode
that enables live packet processing of the resulting frames. Previous uses
of BPF_PROG_RUN for XDP returned the XDP program return code and the
modified packet data to userspace, which is useful for unit testing of XDP
programs.
The existing BPF_PROG_RUN for XDP allows userspace to set the ingress
ifindex and RXQ number as part of the context object being passed to the
kernel. This patch reuses that code, but adds a new mode with different
semantics, which can be selected with the new BPF_F_TEST_XDP_LIVE_FRAMES
flag.
When running BPF_PROG_RUN in this mode, the XDP program return codes will
be honoured: returning XDP_PASS will result in the frame being injected
into the networking stack as if it came from the selected networking
interface, while returning XDP_TX and XDP_REDIRECT will result in the frame
being transmitted out that interface. XDP_TX is translated into an
XDP_REDIRECT operation to the same interface, since the real XDP_TX action
is only possible from within the network drivers themselves, not from the
process context where BPF_PROG_RUN is executed.
Internally, this new mode of operation creates a page pool instance while
setting up the test run, and feeds pages from that into the XDP program.
The setup cost of this is amortised over the number of repetitions
specified by userspace.
To support the performance testing use case, we further optimise the setup
step so that all pages in the pool are pre-initialised with the packet
data, and pre-computed context and xdp_frame objects stored at the start of
each page. This makes it possible to entirely avoid touching the page
content on each XDP program invocation, and enables sending up to 9
Mpps/core on my test box.
Because the data pages are recycled by the page pool, and the test runner
doesn't re-initialise them for each run, subsequent invocations of the XDP
program will see the packet data in the state it was after the last time it
ran on that particular page. This means that an XDP program that modifies
the packet before redirecting it has to be careful about which assumptions
it makes about the packet content, but that is only an issue for the most
naively written programs.
Enabling the new flag is only allowed when not setting ctx_out and data_out
in the test specification, since using it means frames will be redirected
somewhere else, so they can't be returned.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220309105346.100053-2-toke@redhat.com
Instead of determining buf_info string in the caller of check_buffer_access(),
we can determine whether the register type is read-only through
type_is_rdonly_mem() helper inside check_buffer_access() and construct
buf_info, making the code slightly cleaner.
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/YiWYLnAkEZXBP/gH@syu-laptop
The trailing slash of LIBBPF_SRCS is redundant, remove it. Also inline
it as its only used in LIBBPF_INCLUDE.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220305161013.361646-1-ytcoode@gmail.com
With the introduction of the btf_type_tag "percpu", we can add a
MEM_PERCPU to identify those pointers that point to percpu memory.
The ability of differetiating percpu pointers from regular memory
pointers have two benefits:
1. It forbids unexpected use of percpu pointers, such as direct loads.
In kernel, there are special functions used for accessing percpu
memory. Directly loading percpu memory is meaningless. We already
have BPF helpers like bpf_per_cpu_ptr() and bpf_this_cpu_ptr() that
wrap the kernel percpu functions. So we can now convert percpu
pointers into regular pointers in a safe way.
2. Previously, bpf_per_cpu_ptr() and bpf_this_cpu_ptr() only work on
PTR_TO_PERCPU_BTF_ID, a special reg_type which describes static
percpu variables in kernel (we rely on pahole to encode them into
vmlinux BTF). Now, since we can identify __percpu tagged pointers,
we can also identify dynamically allocated percpu memory as well.
It means we can use bpf_xxx_cpu_ptr() on dynamic percpu memory.
This would be very convenient when accessing fields like
"cgroup->rstat_cpu".
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-4-haoluo@google.com
With the introduction of MEM_USER in
commit c6f1bfe89a ("bpf: reject program if a __user tagged memory accessed in kernel way")
PTR_TO_BTF_ID can be combined with a MEM_USER tag. Therefore, most
likely, when we compare reg_type against PTR_TO_BTF_ID, we want to use
the reg's base_type. Previously the check in check_mem_access() wants
to say: if the reg is BTF_ID but not NULL, the execution flow falls
into the 'then' branch. But now a reg of (BTF_ID | MEM_USER), which
should go into the 'then' branch, goes into the 'else'.
The end results before and after this patch are the same: regs tagged
with MEM_USER get rejected, but not in a way we intended. So fix the
condition, the error message now is correct.
Before (log from commit 696c390115):
$ ./test_progs -v -n 22/3
...
libbpf: prog 'test_user1': BPF program load failed: Permission denied
libbpf: prog 'test_user1': -- BEGIN PROG LOAD LOG --
R1 type=ctx expected=fp
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
; int BPF_PROG(test_user1, struct bpf_testmod_btf_type_tag_1 *arg)
0: (79) r1 = *(u64 *)(r1 +0)
func 'bpf_testmod_test_btf_type_tag_user_1' arg0 has btf_id 136561 type STRUCT 'bpf_testmod_btf_type_tag_1'
1: R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,off=0,imm=0)
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 invalid mem access 'user_ptr_'
Now:
libbpf: prog 'test_user1': BPF program load failed: Permission denied
libbpf: prog 'test_user1': -- BEGIN PROG LOAD LOG --
R1 type=ctx expected=fp
0: R1=ctx(id=0,off=0,imm=0) R10=fp0
; int BPF_PROG(test_user1, struct bpf_testmod_btf_type_tag_1 *arg)
0: (79) r1 = *(u64 *)(r1 +0)
func 'bpf_testmod_test_btf_type_tag_user_1' arg0 has btf_id 104036 type STRUCT 'bpf_testmod_btf_type_tag_1'
1: R1_w=user_ptr_bpf_testmod_btf_type_tag_1(id=0,ref_obj_id=0,off=0,imm=0)
; g = arg->a;
1: (61) r1 = *(u32 *)(r1 +0)
R1 is ptr_bpf_testmod_btf_type_tag_1 access user memory: off=0
Note the error message for the reason of rejection.
Fixes: c6f1bfe89a ("bpf: reject program if a __user tagged memory accessed in kernel way")
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220304191657.981240-2-haoluo@google.com
Let's ensure that the PTR_TO_BTF_ID reg being passed in to release BPF
helpers and kfuncs always has its offset set to 0. While not a real
problem now, there's a very real possibility this will become a problem
when more and more kfuncs are exposed, and more BPF helpers are added
which can release PTR_TO_BTF_ID.
Previous commits already protected against non-zero var_off. One of the
case we are concerned about now is when we have a type that can be
returned by e.g. an acquire kfunc:
struct foo {
int a;
int b;
struct bar b;
};
... and struct bar is also a type that can be returned by another
acquire kfunc.
Then, doing the following sequence:
struct foo *f = bpf_get_foo(); // acquire kfunc
if (!f)
return 0;
bpf_put_bar(&f->b); // release kfunc
... would work with the current code, since the btf_struct_ids_match
takes reg->off into account for matching pointer type with release kfunc
argument type, but would obviously be incorrect, and most likely lead to
a kernel crash. A test has been included later to prevent regressions in
this area.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-5-memxor@gmail.com
check_ptr_off_reg only allows fixed offset to be set for PTR_TO_BTF_ID,
where reg->off < 0 doesn't make sense. This would shift the pointer
backwards, and fails later in btf_struct_ids_match or btf_struct_walk
due to out of bounds access (since offset is interpreted as unsigned).
Improve the verifier by rejecting this case by using a better error
message for BPF helpers and kfunc, by putting a check inside the
check_func_arg_reg_off function.
Also, update existing verifier selftests to work with new error string.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-4-memxor@gmail.com
When kfunc support was added, check_ctx_reg was called for PTR_TO_CTX
register, but no offset checks were made for PTR_TO_BTF_ID. Only
reg->off was taken into account by btf_struct_ids_match, which protected
against type mismatch due to non-zero reg->off, but when reg->off was
zero, a user could set the variable offset of the register and allow it
to be passed to kfunc, leading to bad pointer being passed into the
kernel.
Fix this by reusing the extracted helper check_func_arg_reg_off from
previous commit, and make one call before checking all supported
register types. Since the list is maintained, any future changes will be
taken into account by updating check_func_arg_reg_off. This function
prevents non-zero var_off to be set for PTR_TO_BTF_ID, but still allows
a fixed non-zero reg->off, which is needed for type matching to work
correctly when using pointer arithmetic.
ARG_DONTCARE is passed as arg_type, since kfunc doesn't support
accepting a ARG_PTR_TO_ALLOC_MEM without relying on size of parameter
type from BTF (in case of pointer), or using a mem, len pair. The
forcing of offset check for ARG_PTR_TO_ALLOC_MEM is done because ringbuf
helpers obtain the size from the header located at the beginning of the
memory region, hence any changes to the original pointer shouldn't be
allowed. In case of kfunc, size is always known, either at verification
time, or using the length parameter, hence this forcing is not required.
Since this check will happen once already for PTR_TO_CTX, remove the
check_ptr_off_reg call inside its block.
Fixes: e6ac2450d6 ("bpf: Support bpf program calling kernel function")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-3-memxor@gmail.com
Lift the list of register types allowed for having fixed and variable
offsets when passed as helper function arguments into a common helper,
so that they can be reused for kfunc checks in later commits. Keeping a
common helper aids maintainability and allows us to follow the same
consistent rules across helpers and kfuncs. Also, convert check_func_arg
to use this function.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-2-memxor@gmail.com
In particular these include:
1) Remove output of inv for scalars in print_verifier_state
2) Replace inv with scalar in verifier error messages
3) Remove _value suffixes for umin/umax/s32_min/etc (except map_value)
4) Remove output of id=0
5) Remove output of ref_obj_id=0
Signed-off-by: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301222745.1667206-1-mykolal@fb.com
On do_jit failure path, the header is freed by bpf_jit_binary_pack_free.
While bpf_jit_binary_pack_free doesn't require proper ro_header->size,
bpf_prog_pack_free still uses it. Set header->size in bpf_int_jit_compile
before calling bpf_jit_binary_pack_free.
Fixes: 1022a5498f ("bpf, x86_64: Use bpf_jit_binary_pack_alloc")
Fixes: 33c9805860 ("bpf: Introduce bpf_jit_binary_pack_[alloc|finalize|free]")
Reported-by: Kui-Feng Lee <kuifeng@fb.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220302175126.247459-3-song@kernel.org
When CONFIG_BPF_JIT_ALWAYS_ON is enabled, /proc/sys/net/core/bpf_jit_enable
is permanently set to 1 and setting any other value than that will return
failure.
Add the above description in the help text of config BPF_JIT_ALWAYS_ON, and
then we can distinguish between BPF_JIT_ALWAYS_ON and BPF_JIT_DEFAULT_ON.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/1645523826-18149-2-git-send-email-yangtiezhu@loongson.cn
For binaries that are statically linked, consecutive stack frames are
likely to be in the same VMA and therefore have the same build id.
On a real-world workload, we observed that 66% of CPU cycles in
__bpf_get_stackid() were spent on build_id_parse() and find_vma().
As an optimization for this case, we can cache the previous frame's
VMA, if the new frame has the same VMA as the previous one, reuse the
previous one's build id.
We are holding the MM locks as reader across the entire loop, so we
don't need to worry about VMA going away.
Tested through "stacktrace_build_id" and "stacktrace_build_id_nmi" in
test_progs.
Suggested-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/bpf/20220224000531.1265030-1-haoluo@google.com
BTF mismatch can occur for a separately-built module even when the ABI is
otherwise compatible and nothing else would prevent successfully loading.
Add a new Kconfig to control how mismatches are handled. By default, preserve
the current behavior of refusing to load the module. If MODULE_ALLOW_BTF_MISMATCH
is enabled, load the module but ignore its BTF information.
Suggested-by: Yonghong Song <yhs@fb.com>
Suggested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Connor O'Brien <connoro@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/CAADnVQJ+OVPnBz8z3vNu8gKXX42jCUqfuvhWAyCQDu8N_yqqwQ@mail.gmail.com
Link: https://lore.kernel.org/bpf/20220223012814.1898677-1-connoro@google.com
In cb80ddc671 ("bpf: Convert bpf_preload.ko to use light skeleton.")
BPF preload was switched from user mode process to use in-kernel light
skeleton instead. However, in the kernel context, early in the boot
sequence, the first available FD can start from 0, instead of normally
3 for user mode process. So FDs 0 and 1 are then used for loaded BPF
programs and prevent init process from setting up stdin/stdout/stderr on
FD 0, 1, and 2 as expected.
Before the fix:
ls -lah /proc/1/fd/*
lrwx------1 root root 64 Feb 23 17:20 /proc/1/fd/0 -> /dev/null
lrwx------ 1 root root 64 Feb 23 17:20 /proc/1/fd/1 -> /dev/null
lrwx------ 1 root root 64 Feb 23 17:20 /proc/1/fd/2 -> /dev/console
lrwx------ 1 root root 64 Feb 23 17:20 /proc/1/fd/6 -> /dev/console
lrwx------ 1 root root 64 Feb 23 17:20 /proc/1/fd/7 -> /dev/console
After the fix:
ls -lah /proc/1/fd/*
lrwx------ 1 root root 64 Feb 24 21:23 /proc/1/fd/0 -> /dev/console
lrwx------ 1 root root 64 Feb 24 21:23 /proc/1/fd/1 -> /dev/console
lrwx------ 1 root root 64 Feb 24 21:23 /proc/1/fd/2 -> /dev/console
Fix by closing prog FDs after initialization. struct bpf_prog's
themselves are kept alive through direct kernel references taken with
bpf_link_get_from_fd().
Fixes: cb80ddc671 ("bpf: Convert bpf_preload.ko to use light skeleton.")
Signed-off-by: Yucong Sun <fallentree@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220225185923.2535519-1-fallentree@fb.com
Add leading space to spdx tag
Use // for spdx c file comment
Replacements
resereved to reserved
inbetween to in between
everytime to every time
intutivie to intuitive
currenct to current
encontered to encountered
referenceing to referencing
upto to up to
exectuted to executed
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220220184055.3608317-1-trix@redhat.com
As stated in the comment found in maybe_wait_bpf_programs(),
the synchronize_rcu() barrier is only needed before returning
to userspace, not after each deletion in the batch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20220218181801.2971275-1-eric.dumazet@gmail.com
Daniel Borkmann says:
====================
bpf-next 2022-02-17
We've added 29 non-merge commits during the last 8 day(s) which contain
a total of 34 files changed, 1502 insertions(+), 524 deletions(-).
The main changes are:
1) Add BTFGen support to bpftool which allows to use CO-RE in kernels without
BTF info, from Mauricio Vásquez, Rafael David Tinoco, Lorenzo Fontana and
Leonardo Di Donato. (Details: https://lpc.events/event/11/contributions/948/)
2) Prepare light skeleton to be used in both kernel module and user space
and convert bpf_preload.ko to use light skeleton, from Alexei Starovoitov.
3) Rework bpftool's versioning scheme and align with libbpf's version number;
also add linked libbpf version info to "bpftool version", from Quentin Monnet.
4) Add minimal C++ specific additions to bpftool's skeleton codegen to
facilitate use of C skeletons in C++ applications, from Andrii Nakryiko.
5) Add BPF verifier sanity check whether relative offset on kfunc calls overflows
desc->imm and reject the BPF program if the case, from Hou Tao.
6) Fix libbpf to use a dynamically allocated buffer for netlink messages to
avoid receiving truncated messages on some archs, from Toke Høiland-Jørgensen.
7) Various follow-up fixes to the JIT bpf_prog_pack allocator, from Song Liu.
8) Various BPF selftest and vmtest.sh fixes, from Yucong Sun.
9) Fix bpftool pretty print handling on dumping map keys/values when no BTF
is available, from Jiri Olsa and Yinjun Zhang.
10) Extend XDP frags selftest to check for invalid length, from Lorenzo Bianconi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (29 commits)
bpf: bpf_prog_pack: Set proper size before freeing ro_header
selftests/bpf: Fix crash in core_reloc when bpftool btfgen fails
selftests/bpf: Fix vmtest.sh to launch smp vm.
libbpf: Fix memleak in libbpf_netlink_recv()
bpftool: Fix C++ additions to skeleton
bpftool: Fix pretty print dump for maps without BTF loaded
selftests/bpf: Test "bpftool gen min_core_btf"
bpftool: Gen min_core_btf explanation and examples
bpftool: Implement btfgen_get_btf()
bpftool: Implement "gen min_core_btf" logic
bpftool: Add gen min_core_btf command
libbpf: Expose bpf_core_{add,free}_cands() to bpftool
libbpf: Split bpf_core_apply_relo()
bpf: Reject kfunc calls that overflow insn->imm
selftests/bpf: Add Skeleton templated wrapper as an example
bpftool: Add C++-specific open/load/etc skeleton wrappers
selftests/bpf: Fix GCC11 compiler warnings in -O2 mode
bpftool: Fix the error when lookup in no-btf maps
libbpf: Use dynamically allocated buffer when receiving netlink messages
libbpf: Fix libbpf.map inheritance chain for LIBBPF_0.7.0
...
====================
Link: https://lore.kernel.org/r/20220217232027.29831-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported various soft lockups caused by bpf batch operations.
INFO: task kworker/1:1:27 blocked for more than 140 seconds.
INFO: task hung in rcu_barrier
Nothing prevents batch ops to process huge amount of data,
we need to add schedule points in them.
Note that maybe_wait_bpf_programs(map) calls from
generic_map_delete_batch() can be factorized by moving
the call after the loop.
This will be done later in -next tree once we get this fix merged,
unless there is strong opinion doing this optimization sooner.
Fixes: aa2e93b8e5 ("bpf: Add generic support for update and delete batch ops")
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Brian Vazquez <brianvv@google.com>
Link: https://lore.kernel.org/bpf/20220217181902.808742-1-eric.dumazet@gmail.com
When commit e6ac2450d6 ("bpf: Support bpf program calling kernel function") added
kfunc support, it defined reg2btf_ids as a cheap way to translate the verifier
reg type to the appropriate btf_vmlinux BTF ID, however
commit c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
moved the __BPF_REG_TYPE_MAX from the last member of bpf_reg_type enum to after
the base register types, and defined other variants using type flag
composition. However, now, the direct usage of reg->type to index into
reg2btf_ids may no longer fall into __BPF_REG_TYPE_MAX range, and hence lead to
out of bounds access and kernel crash on dereference of bad pointer.
Fixes: c25b2ae136 ("bpf: Replace PTR_TO_XXX_OR_NULL with PTR_TO_XXX | PTR_MAYBE_NULL")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220216201943.624869-1-memxor@gmail.com
BTFGen needs to run the core relocation logic in order to understand
what are the types involved in a given relocation.
Currently bpf_core_apply_relo() calculates and **applies** a relocation
to an instruction. Having both operations in the same function makes it
difficult to only calculate the relocation without patching the
instruction. This commit splits that logic in two different phases: (1)
calculate the relocation and (2) patch the instruction.
For the first phase bpf_core_apply_relo() is renamed to
bpf_core_calc_relo_insn() who is now only on charge of calculating the
relocation, the second phase uses the already existing
bpf_core_patch_insn(). bpf_object__relocate_core() uses both of them and
the BTFGen will use only bpf_core_calc_relo_insn().
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Rafael David Tinoco <rafael.tinoco@aquasec.com>
Signed-off-by: Lorenzo Fontana <lorenzo.fontana@elastic.co>
Signed-off-by: Leonardo Di Donato <leonardo.didonato@elastic.co>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220215225856.671072-2-mauricio@kinvolk.io
Now kfunc call uses s32 to represent the offset between the address of
kfunc and __bpf_call_base, but it doesn't check whether or not s32 will
be overflowed. The overflow is possible when kfunc is in module and the
offset between module and kernel is greater than 2GB. Take arm64 as an
example, before commit b2eed9b588 ("arm64/kernel: kaslr: reduce module
randomization range to 2 GB"), the offset between module symbol and
__bpf_call_base will in 4GB range due to KASLR and may overflow s32.
So add an extra checking to reject these invalid kfunc calls.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220215065732.3179408-1-houtao1@huawei.com
Currently the following code in check_and_init_map_value()
*(struct bpf_timer *)(dst + map->timer_off) =
(struct bpf_timer){};
can help generate bpf_timer definition in vmlinuxBTF.
But the code above may not zero the whole structure
due to anonymour members and that code will be replaced
by memset in the subsequent patch and
bpf_timer definition will disappear from vmlinuxBTF.
Let us emit the type explicitly so bpf program can continue
to use it from vmlinux.h.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211194948.3141529-1-yhs@fb.com
bpf_prog_pack causes build error with powerpc ppc64_defconfig:
kernel/bpf/core.c:830:23: error: variably modified 'bitmap' at file scope
830 | unsigned long bitmap[BITS_TO_LONGS(BPF_PROG_CHUNK_COUNT)];
| ^~~~~~
This is because the marco expands as:
unsigned long bitmap[((((((1UL) << (16 + __pte_index_size)) / (1 << 6))) \
+ ((sizeof(long) * 8)) - 1) / ((sizeof(long) * 8)))];
where __pte_index_size is a global variable.
Fix it by turning bitmap into a 0-length array.
Fixes: 57631054fa ("bpf: Introduce bpf_prog_pack allocator")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220211024939.2962537-1-song@kernel.org
Paul E. McKenney
Yuntao Wang
Linus Torvalds
Song Liu
Joanne Koong
Jiri Olsa
Kumar Kartikeya Dwivedi
Namhyung Kim
Hou Tao
Peter Zijlstra
Roberto Sassu
Toke Høiland-Jørgensen
Shung-Hsi Yu
Hao Luo
Mykola Lysenko
Tiezhu Yang
Connor O'Brien
Yucong Sun
Tom Rix
Souptick Joarder (HPE)
Eric Dumazet
Jakub Kicinski
Mauricio Vásquez
Yonghong Song