Граф коммитов

12 Коммитов

Автор SHA1 Сообщение Дата
Jiri Slaby 1b011e2f13 ratelimit: fix WARN_ON_RATELIMIT return value
The macro is to be used similarly as WARN_ON as:

  if (WARN_ON_RATELIMIT(condition, state))
	do_something();

One would expect only 'condition' to affect the 'if', but
WARN_ON_RATELIMIT does internally only:

  WARN_ON((condition) && __ratelimit(state))

So the 'if' is affected by the ratelimiting state too.  Fix this by
returning 'condition' in any case.

Note that nobody uses WARN_ON_RATELIMIT yet, so there is nothing to
worry about.  But I was about to use it and was a bit surprised.

Link: http://lkml.kernel.org/r/20161215093224.23126-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20 09:48:47 -08:00
Borislav Petkov 6b1d174b0c ratelimit: extend to print suppressed messages on release
Extend the ratelimiting facility to print the amount of suppressed lines
when it is being released.

This use case is aimed at short-termed, burst-like users for which we
want to output the suppressed lines stats only once, after it has been
disposed of.  For an example, see /dev/kmsg usage in a follow-on patch.

Also, change the printk() line we issue on release to not use
"callbacks" as it is misleading: we're not suppressing callbacks but
printk() calls.

This has been separated from a previous patch by Linus.

Link: http://lkml.kernel.org/r/20160716061745.15795-2-bp@alien8.de
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: Franck Bui <fbui@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:06 -04:00
Dmitry Monakhov 89e3f90995 ratelimit: add initialization macro
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13 12:42:52 -08:00
Markus Trippelsdorf 2351a6c6e7 tty: Fix bogus "callbacks suppressed" messages
On the current git tree one sees messages such as:
 tty_init_dev: 24 callbacks suppressed
 tty_init_dev: 3 callbacks suppressed

To fix this we need to look at condition before calling __ratelimit in
the WARN_RATELIMIT macro. While at it remove the superfluous
__WARN_RATELIMIT macros.

Original patch is from Joe Perches and Jiri Slaby.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-and-tested-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-05 09:26:01 -07:00
Thomas Gleixner 07354eb1a7 locking, printk: Annotate logbuf_lock as raw
The logbuf_lock lock can be taken in atomic context and therefore
cannot be preempted on -rt - annotate it.

In mainline this change documents the low level nature of
the lock - otherwise there's no functional difference. Lockdep
and Sparse checking will work as usual.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ merged and fixed it ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-13 11:11:54 +02:00
David S. Miller 86e4ca66e8 bug.h: Move ratelimit warn interfaces to ratelimit.h
As reported by Ingo Molnar, we still have configuration combinations
where use of the WARN_RATELIMIT interfaces break the build because
dependencies don't get met.

Instead of going down the long road of trying to make it so that
ratelimit.h can get included by kernel.h or asm-generic/bug.h,
just move the interface into ratelimit.h and make users have
to include that.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-05-26 15:00:31 -04:00
Namhyung Kim f5d87d851d printk: declare printk_ratelimit_state in ratelimit.h
Adding declaration of printk_ratelimit_state in ratelimit.h removes
potential build breakage and following sparse warning:

 kernel/printk.c:1426:1: warning: symbol 'printk_ratelimit_state' was not declared. Should it be static?

[akpm@linux-foundation.org: remove unneeded ifdef]
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:16 -07:00
OGAWA Hirofumi f40c396a9a ratelimit: add ratelimit_state_init()
For now, all users of ratelimit_state allocates it statically, so
DEFINE_RATELIMIT_STATE() is enough.  But, I want to use ratelimit_state
for fs, i.e.  per super_block to suppress too many error reports.

So, this adds ratelimit_state_init() to initialize ratelimite_state
which is dynamically allocated, instead of opencoding.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25 08:07:03 -07:00
Christian Borntraeger 5c82871335 ratelimit: Make suppressed output messages more useful
Today I got:

  [39648.224782] Registered led device: iwl-phy0::TX
  [40676.545099] __ratelimit: 246 callbacks suppressed
  [40676.545103] abcdef[23675]: segfault at 0 ...

as you can see the ratelimit message contains a function prefix.
Since this is always __ratelimit, this wont help much.

This patch changes __ratelimit and printk_ratelimit to print the
function name that calls ratelimit.

This will pinpoint the responsible function, as long as not several
different places call ratelimit with the same ratelimit state at
the same time. In that case we catch only one random function that
calls ratelimit after the wait period.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <200910231458.11832.borntraeger@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 17:26:37 +02:00
Ingo Molnar 979f693def ratelimit: Use per ratelimit context locking
I'd like to use printk_ratelimit() in atomic context, but that's
not possible right now due to the spinlock usage this commit
introduced more than a year ago:

  717115e: printk ratelimiting rewrite

As a first step push the lock into the ratelimit state structure.
This allows us to deal with locking failures to be considered as an
event related to that state being too busy.

Also clean up the code a bit (without changing functionality):

 - tidy up the definitions

 - clean up the code flow

This also shrinks the code a tiny bit:

   text	   data	    bss	    dec	    hex	filename
    264	      0	      4	    268	    10c	ratelimit.o.before
    255	      0	      0	    255	     ff	ratelimit.o.after

( Whole-kernel data size got a bit larger, because we have
  two ratelimit-state data structures right now. )

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-22 15:31:34 +02:00
Andrew Morton b76f90b526 remove ratelimt()
It mistakenly assumes that a static local in an inlined function is a
kernel-wide singleton.  It also has no callers, so let's remove it.

Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-12 17:17:17 -08:00
Dave Young 717115e1a5 printk ratelimiting rewrite
All ratelimit user use same jiffies and burst params, so some messages
(callbacks) will be lost.

For example:
a call printk_ratelimit(5 * HZ, 1)
b call printk_ratelimit(5 * HZ, 1) before the 5*HZ timeout of a, then b will
will be supressed.

- rewrite __ratelimit, and use a ratelimit_state as parameter.  Thanks for
  hints from andrew.

- Add WARN_ON_RATELIMIT, update rcupreempt.h

- remove __printk_ratelimit

- use __ratelimit in net_ratelimit

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:29 -07:00