* Fix a race in the percpu counters summation code where the summation
failed to add in the values for any CPUs that were dying but not yet
dead. This fixes some minor discrepancies and incorrect assertions
when running generic/650.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZBdAbgAKCRBKO3ySh0YR
pkltAQCs4QO5LjYReqjUxd4cSsLtNnNon09qswRsl2GuRyI36AEAxI9QMq4Q6D9V
ZasNbiTCkV3KPKfmp6gf1mQNLk1lGQ0=
=Bz3q
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
Equivalent of for_each_cpu_and, except it ORs the two masks together
so it iterates all the CPUs present in either mask.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Reported-by: syzbot+96cae094d90877641f32@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=96cae094d90877641f32
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Link: https://lore.kernel.org/lkml/c1f4cc16-feea-b83c-82cf-1a1f007b7eb9@I-love.SAKURA.ne.jp/
Fixes: 596ff4a09b ("cpumask: re-introduce constant-sized cpumask optimizations")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 596ff4a09b ("cpumask: re-introduce constant-sized cpumask
optimizations") changed cpumask_setall() to use "bitmap_set()" instead
of "bitmap_fill()", because bitmap_fill() would explicitly set all the
bits of a constant sized small bitmap, and that's exactly what we don't
want: we want to only set bits up to 'nr_cpu_ids', which is what
"bitmap_set()" does.
However, Yury correctly points out that while "bitmap_set()" does indeed
only set bits up to the required bitmap size, it doesn't _clear_ bits
above that size, so the upper bits would still not have well-defined
values.
Now, none of this should really matter, since any bits set past
'nr_cpu_ids' should always be ignored in the first place. Yes, the bit
scanning functions might return them as a result, but since users should
always consider the ">= nr_cpu_ids" condition to mean "no more bits",
that shouldn't have any actual effect (see previous commit 8ca09d5fa3
"cpumask: fix incorrect cpumask scanning result checks").
But let's just do it right, the way the code was _intended_ to work. We
have had enough lazy code that works but bites us in the *rse later
(again, see previous commit) that there's no reason to not just do this
properly.
It turns out that "bitmap_fill()" gets this all right for the complex
case, and really only fails for the inlined optimized case that just
fills the whole word. And while we could just fix bitmap_fill() to use
the proper last word mask, there's two issues with that:
- the cpumask case wants to do the _optimization_ based on "NR_CPUS is
a small constant", but then wants to do the actual bit _fill_ based
on "nr_cpu_ids" that isn't necessarily that same constant
- we have lots of non-cpumask users of bitmap_fill(), and while they
hopefully don't care, and probably would want the proper semantics
anyway ("only set bits up to the limit"), I do not want the cpumask
changes to impact other parts
So this ends up just doing the single-word optimization by hand in the
cpumask code. If our cpumask is fundamentally limited to a single word,
just do the proper "fill in that word" exactly. And if it's the more
complex multi-word case, then the generic bitmap_fill() will DTRT.
This is all an example of how our bitmap function optimizations really
are somewhat broken. They conflate the "this is size of the bitmap"
optimizations with the actual bit(s) we want to set.
In many cases we really want to have the two be separate things:
sometimes we base our optimizations on the size of the whole bitmap ("I
know this whole bitmap fits in a single word, so I'll just use
single-word accesses"), and sometimes we base them on the bit we are
looking at ("this is just acting on bits that are in the first word, so
I'll use single-word accesses").
Notice how the end result of the two optimizations are the same, but the
way we get to them are quite different.
And all our cpumask optimization games are really about that fundamental
distinction, and we'd often really want to pass in both the "this is the
bit I'm working on" (which _can_ be a small constant but might be
variable), and "I know it's in this range even if it's variable" (based
on CONFIG_NR_CPUS).
So this cpumask_setall() implementation just makes that explicit. It
checks the "I statically know the size is small" using the known static
size of the cpumask (which is what that 'small_cpumask_bits' is all
about), but then sets the actual bits using the exact number of cpus we
have (ie 'nr_cpumask_bits')
Of course, in a perfect world, the compiler would have done all the
range analysis (possibly with help from us just telling it that
"this value is always in this range"), and would do all of this for us.
But that is not the world we live in.
While we dream of that perfect world, this does that manual logic to
make it all work out. And this was a very long explanation for a small
code change that shouldn't even matter.
Reported-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The never used nr_cpumask_size is just a typo, hence use existing
redefinition that's called nr_cpumask_bits.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit aa47a7c215 ("lib/cpumask: deprecate nr_cpumask_bits") resulted
in the cpumask operations potentially becoming hugely less efficient,
because suddenly the cpumask was always considered to be variable-sized.
The optimization was then later added back in a limited form by commit
6f9c07be9d ("lib/cpumask: add FORCE_NR_CPUS config option"), but that
FORCE_NR_CPUS option is not useful in a generic kernel and more of a
special case for embedded situations with fixed hardware.
Instead, just re-introduce the optimization, with some changes.
Instead of depending on CPUMASK_OFFSTACK being false, and then always
using the full constant cpumask width, this introduces three different
cpumask "sizes":
- the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids.
This is used for situations where we should use the exact size.
- the "small" size (small_cpumask_bits) is the NR_CPUS constant if it
fits in a single word and the bitmap operations thus end up able
to trigger the "small_const_nbits()" optimizations.
This is used for the operations that have optimized single-word
cases that get inlined, notably the bit find and scanning functions.
- the "large" size (large_cpumask_bits) is the NR_CPUS constant if it
is an sufficiently small constant that makes simple "copy" and
"clear" operations more efficient.
This is arbitrarily set at four words or less.
As a an example of this situation, without this fixed size optimization,
cpumask_clear() will generate code like
movl nr_cpu_ids(%rip), %edx
addq $63, %rdx
shrq $3, %rdx
andl $-8, %edx
callq memset@PLT
on x86-64, because it would calculate the "exact" number of longwords
that need to be cleared.
In contrast, with this patch, using a MAX_CPU of 64 (which is quite a
reasonable value to use), the above becomes a single
movq $0,cpumask
instruction instead, because instead of caring to figure out exactly how
many CPU's the system has, it just knows that the cpumask will be a
single word and can just clear it all.
Note that this does end up tightening the rules a bit from the original
version in another way: operations that set bits in the cpumask are now
limited to the actual nr_cpu_ids limit, whereas we used to do the
nr_cpumask_bits thing almost everywhere in the cpumask code.
But if you just clear bits, or scan for bits, we can use the simpler
compile-time constants.
In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()'
which were not useful, and which fundamentally have to be limited to
'nr_cpu_ids'. Better remove them now than have somebody introduce use
of them later.
Of course, on x86-64 with MAXSMP there is no sane small compile-time
constant for the cpumask sizes, and we end up using the actual CPU bits,
and will generate the above kind of horrors regardless. Please don't
use MAXSMP unless you really expect to have machines with thousands of
cores.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core
----
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used
to describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols
---------
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP
path manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF
---
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key
to better support decap on GRE tunnel devices not operating
in collect metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk
and bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols
by livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter
---------
- Remove the CLUSTERIP target. It has been marked as obsolete
for years, and we still have WARN splats wrt. races of
the out-of-band /proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to
the existing 'delete' commands, but do not return an error if
the referenced object (set, chain, rule...) did not exist.
Driver API
----------
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into multiple
files, drop some of the unnecessarily granular locks and factor out
common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless Extensions
for Wi-Fi 7 devices at all. Everyone should switch to using nl80211
interface instead.
- Improve the CAN bit timing configuration. Use extack to return error
messages directly to user space, update the SJW handling, including
the definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
New hardware / drivers
----------------------
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers
-------
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- enetc: support XDP_REDIRECT for XDP non-linear buffers
- enetc: improve reconfig, avoid link flap and waiting for idle
- enetc: support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=xXhC
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Introduce cpumask_nth_and_andnot() based on find_nth_and_andnot_bit().
It's used in the following patch to traverse cpumasks without storing
intermediate result in temporary cpumask.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 78e5a33994 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a33994 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
for_each_cpu_and() is very convenient as it saves having to allocate a
temporary cpumask to store the result of cpumask_and(). The same issue
applies to cpumask_andnot() which doesn't actually need temporary storage
for iteration purposes.
Following what has been done for for_each_cpu_and(), introduce
for_each_cpu_andnot().
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
The range of valid CPUs is [0, nr_cpu_ids). Some cpumask functions are
passed with a shifted CPU index, and for them, the valid range is
[-1, nr_cpu_ids-1). Currently for those functions, we check the index
against [-1, nr_cpu_ids), which is wrong.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add for_each_set_bit_wrap() macro and use it in for_each_cpu_wrap(). The
new macro is based on __for_each_wrap() iterator, which is simpler and
smaller than cpumask_next_wrap().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The difference between for_each_cpu() and for_each_set_bit()
is that the latter uses cpumask_next() instead of find_next_bit(),
and so calls cpumask_check().
This check is useless because the iterator value is not provided by
user. It generates false-positives for the very last iteration
of for_each_cpu().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add cpumask_nth_{,and,andnot} as wrappers around corresponding
find functions, and use it in cpumask_local_spread().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The function calculates Hamming weight of (bitmap1 & bitmap2). Now we
have to do like this:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
This requires additional memory, adds pressure on alloc subsystem, and
way less cache-friendly than just:
weight = bitmap_weight_and(map1, map2, nbits);
The following patches apply it for cpumask functions.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The size of cpumasks is hard-limited by compile-time parameter NR_CPUS,
but defined at boot-time when kernel parses ACPI/DT tables, and stored in
nr_cpu_ids. In many practical cases, number of CPUs for a target is known
at compile time, and can be provided with NR_CPUS.
In that case, compiler may be instructed to rely on NR_CPUS as on actual
number of CPUs, not an upper limit. It allows to optimize many cpumask
routines and significantly shrink size of the kernel image.
This patch adds FORCE_NR_CPUS option to teach the compiler to rely on
NR_CPUS and enable corresponding optimizations.
If FORCE_NR_CPUS=y, kernel will not set nr_cpu_ids at boot, but only check
that the actual number of possible CPUs is equal to NR_CPUS, and WARN if
that doesn't hold.
The new option is especially useful in embedded applications because
kernel configurations are unique for each SoC, the number of CPUs is
constant and known well, and memory limitations are typically harder.
For my 4-CPU ARM64 build with NR_CPUS=4, FORCE_NR_CPUS=y saves 46KB:
add/remove: 3/4 grow/shrink: 46/729 up/down: 652/-46952 (-46300)
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cpumask code is written in assumption that when CONFIG_CPUMASK_OFFSTACK
is enabled, all cpumasks have boot-time defined size, otherwise the size
is always NR_CPUS.
The latter is wrong because the number of possible cpus is always
calculated on boot, and it may be less than NR_CPUS.
On my 4-cpu arm64 VM the nr_cpu_ids is 4, as expected, and nr_cpumask_bits
is 256, which corresponds to NR_CPUS. This not only leads to useless
traversing of cpumask bits greater than 4, this also makes some cpumask
routines fail.
For example, cpumask_full(0b1111000..000) would erroneously return false
in the example above because tail bits in the mask are all unset.
This patch deprecates nr_cpumask_bits and wires it to nr_cpu_ids
unconditionally, so that cpumask routines will not waste time traversing
unused part of cpu masks. It also fixes cpumask_full() and similar
routines.
As a side effect, because now a length of cpumasks is defined at run-time
even if CPUMASK_OFFSTACK is disabled, compiler can't optimize corresponding
functions.
It increases kernel size by ~2.5KB if OFFSTACK is off. This is addressed in
the following patch.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The comment says that HOTPLUG config option enables all cpus in
cpu_possible_mask up to NR_CPUs. This is wrong. Even if HOTPLUG is
enabled, the mask is populated on boot with respect to ACPI/DT records.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
In preparation to support compile-time nr_cpu_ids, add a setter for
the variable.
This is a no-op for all arches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
In the uniprocessor case, cpumask_next_wrap() can be simplified, as the
number of valid argument combinations is limited:
- 'start' can only be 0
- 'n' can only be -1 or 0
The only valid CPU that can then be returned, if any, will be the first
one set in the provided 'mask'.
For NR_CPUS == 1, include/linux/cpumask.h now provides an inline
definition of cpumask_next_wrap(), which will conflict with the one
provided by lib/cpumask.c. Make building of lib/cpumask.o again depend
on CONFIG_SMP=y (i.e. NR_CPUS > 1) to avoid the re-definition.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Between the generic version, and their uniprocessor optimised
implementations, the return types of cpumask_any_and_distribute() and
cpumask_any_distribute() are not identical. Change the UP versions to
'unsigned int', to match the generic versions.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This branch consists of:
Qu Wenruo:
lib: bitmap: fix the duplicated comments on bitmap_to_arr64()
https://lore.kernel.org/lkml/0d85e1dbad52ad7fb5787c4432bdb36cbd24f632.1656063005.git.wqu@suse.com/
Alexander Lobakin:
bitops: let optimize out non-atomic bitops on compile-time constants
https://lore.kernel.org/lkml/20220624121313.2382500-1-alexandr.lobakin@intel.com/T/
Yury Norov:
lib: cleanup bitmap-related headers
https://lore.kernel.org/linux-arm-kernel/YtCVeOGLiQ4gNPSf@yury-laptop/T/#m305522194c4d38edfdaffa71fcaaf2e2ca00a961
Alexander Lobakin:
x86/olpc: fix 'logical not is only applied to the left hand side'
https://www.spinics.net/lists/kernel/msg4440064.html
Yury Norov:
lib/nodemask: inline wrappers around bitmap
https://lore.kernel.org/all/20220723214537.2054208-1-yury.norov@gmail.com/
-----BEGIN PGP SIGNATURE-----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=4dTW
-----END PGP SIGNATURE-----
Merge tag 'bitmap-6.0-rc1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
fatfs, autofs, squashfs, procfs, etc.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYu9BeQAKCRDdBJ7gKXxA
jp1DAP4mjCSvAwYzXklrIt+Knv3CEY5oVVdS+pWOAOGiJpldTAD9E5/0NV+VmlD9
kwS/13j38guulSlXRzDLmitbg81zAAI=
=Zfum
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"Updates to various subsystems which I help look after. lib, ocfs2,
fatfs, autofs, squashfs, procfs, etc. A relatively small amount of
material this time"
* tag 'mm-nonmm-stable-2022-08-06-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
scripts/gdb: ensure the absolute path is generated on initial source
MAINTAINERS: kunit: add David Gow as a maintainer of KUnit
mailmap: add linux.dev alias for Brendan Higgins
mailmap: update Kirill's email
profile: setup_profiling_timer() is moslty not implemented
ocfs2: fix a typo in a comment
ocfs2: use the bitmap API to simplify code
ocfs2: remove some useless functions
lib/mpi: fix typo 'the the' in comment
proc: add some (hopefully) insightful comments
bdi: remove enum wb_congested_state
kernel/hung_task: fix address space of proc_dohung_task_timeout_secs
lib/lzo/lzo1x_compress.c: replace ternary operator with min() and min_t()
squashfs: support reading fragments in readahead call
squashfs: implement readahead
squashfs: always build "file direct" version of page actor
Revert "squashfs: provide backing_dev_info in order to disable read-ahead"
fs/ocfs2: Fix spelling typo in comment
ia64: old_rr4 added under CONFIG_HUGETLB_PAGE
proc: fix test for "vsyscall=xonly" boot option
...
The extern specifier is not needed for this declaration, so drop it. The
function also depends only on the input parameters, and has no side
effects, so it can be marked __pure like other functions in cpumask.h.
Link: https://lkml.kernel.org/r/72ab755695b74bb5fbaa756ae4c0edd708d172f1.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On uniprocessor builds, any CPU mask is assumed to contain exactly one CPU
(cpu0). This assumption ignores the existence of empty masks, resulting
in incorrect behaviour.
cpumask_first_zero(), cpumask_next_zero(), and for_each_cpu_not() don't
provide behaviour matching the assumption that a UP mask is always "1",
and instead provide behaviour matching the empty mask.
Drop the incorrectly optimised code and use the generic implementations in
all cases.
Link: https://lkml.kernel.org/r/86bf3f005abba2d92120ddd0809235cab4f759a6.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On uniprocessor builds, the following loops will always run over a mask
that contains one enabled CPU (cpu0):
- for_each_possible_cpu
- for_each_online_cpu
- for_each_present_cpu
Provide uniprocessor-specific macros for these loops, that always run
exactly once.
Link: https://lkml.kernel.org/r/3a92869b902a075b97be5d1452c9c6badbbff0df.1656777646.git.sander@svanheule.net
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Acked-by: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using bin_attributes with a 0 size causes fstat and friends to return that
0 size. This breaks userspace code that retrieves the size before reading
the file. Rather than reverting 75bd50fa84 ("drivers/base/node.c: use
bin_attribute to break the size limitation of cpumap ABI") let's put in a
size value at compile time.
For cpulist the maximum size is on the order of
NR_CPUS * (ceil(log10(NR_CPUS)) + 1)/2
which for 8192 is 20480 (8192 * 5)/2. In order to get near that you'd need
a system with every other CPU on one node. For example: (0,2,4,8, ... ).
To simplify the math and support larger NR_CPUS in the future we are using
(NR_CPUS * 7)/2. We also set it to a min of PAGE_SIZE to retain the older
behavior for smaller NR_CPUS.
The cpumap file the size works out to be NR_CPUS/4 + NR_CPUS/32 - 1
(or NR_CPUS * 9/32 - 1) including the ","s.
Add a set of macros for these values to cpumask.h so they can be used in
multiple places. Apply these to the handful of such files in
drivers/base/topology.c as well as node.c.
As an example, on an 80 cpu 4-node system (NR_CPUS == 8192):
before:
-r--r--r--. 1 root root 0 Jul 12 14:08 system/node/node0/cpulist
-r--r--r--. 1 root root 0 Jul 11 17:25 system/node/node0/cpumap
after:
-r--r--r--. 1 root root 28672 Jul 13 11:32 system/node/node0/cpulist
-r--r--r--. 1 root root 4096 Jul 13 11:31 system/node/node0/cpumap
CONFIG_NR_CPUS = 16384
-r--r--r--. 1 root root 57344 Jul 13 14:03 system/node/node0/cpulist
-r--r--r--. 1 root root 4607 Jul 13 14:02 system/node/node0/cpumap
The actual number of cpus doesn't matter for the reported size since they
are based on NR_CPUS.
Fixes: 75bd50fa84 ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI")
Fixes: bb9ec13d15 ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Yury Norov <yury.norov@gmail.com> (for include/linux/cpumask.h)
Signed-off-by: Phil Auld <pauld@redhat.com>
Link: https://lore.kernel.org/r/20220715134924.3466194-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After moving gfp flags to a separate header, it's possible to move some
cpumask allocators into headers, and avoid creating real functions.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
To avoid circular dependencies, cpumask keeps simple (almost) one-line
wrappers around find_bit() in a c-file.
Commit 47d8c15615 ("include: move find.h from asm_generic to linux")
moved find.h header out of asm_generic include path, and it helped to fix
many circular dependencies, including some in cpumask.h.
This patch moves those one-liners to header files.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add a x86-specific cpumask_clear_cpu() helper which will be used in
places where the explicit KASAN-instrumentation in the *_bit() helpers
is unwanted.
Also, always inline two more cpumask generic helpers.
allyesconfig:
text data bss dec hex filename
190553143 159425889 32076404 382055436 16c5b40c vmlinux.before
190551812 159424945 32076404 382053161 16c5ab29 vmlinux.after
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220204083015.17317-2-bp@alien8.de
Former are always inlined so do that for the latter too, for
consistency.
Size impact is a whopping 5 bytes increase! :-)
text data bss dec hex filename
22350551 8213184 1917164 32480899 1ef9e83 vmlinux.x86-64.defconfig.before
22350556 8213152 1917164 32480872 1ef9e68 vmlinux.x86-64.defconfig.after
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20220113155357.4706-3-bp@alien8.de
cpumask_first() is a more effective analogue of 'next' version if n == -1
(which means start == 0). This patch replaces 'next' with 'first' where
things look trivial.
There's no cpumask_first_zero() function, so create it.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Now we have an efficient implementation for find_first_and_bit(),
so switch cpumask to use it where appropriate.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The changes in the patch series [1] introduced a terminating null byte
when reading from cpulist or cpumap sysfs files, for example:
$ xxd /sys/devices/system/node/node0/cpulist
00000000: 302d 310a 00 0-1..
Before this change, the output looked as follows:
$ xxd /sys/devices/system/node/node0/cpulist
00000000: 302d 310a 0-1.
Fix this regression by excluding the terminating null byte from the
returned length in cpumap_print_list_to_buf and
cpumap_print_bitmask_to_buf.
[1] https://lore.kernel.org/all/20210806110251.560-1-song.bao.hua@hisilicon.com/
Fixes: 1fae562983 ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list")
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20210916222705.13554-1-tklauser@distanz.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The existing cpumap_print_to_pagebuf() is used by cpu topology and other
drivers to export hexadecimal bitmask and decimal list to userspace by
sysfs ABI.
Right now, those drivers are using a normal attribute for this kind of
ABIs. A normal attribute typically has show entry as below:
static ssize_t example_dev_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
...
return cpumap_print_to_pagebuf(true, buf, &pmu_mmdc->cpu);
}
show entry of attribute has no offset and count parameters and this
means the file is limited to one page only.
cpumap_print_to_pagebuf() API works terribly well for this kind of
normal attribute with buf parameter and without offset, count:
static inline ssize_t
cpumap_print_to_pagebuf(bool list, char *buf, const struct cpumask *mask)
{
return bitmap_print_to_pagebuf(list, buf, cpumask_bits(mask),
nr_cpu_ids);
}
The problem is once we have many cpus, we have a chance to make bitmask
or list more than one page. Especially for list, it could be as complex
as 0,3,5,7,9,...... We have no simple way to know it exact size.
It turns out bin_attribute is a way to break this limit. bin_attribute
has show entry as below:
static ssize_t
example_bin_attribute_show(struct file *filp, struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t offset, size_t count)
{
...
}
With the new offset and count parameters, this makes sysfs ABI be able
to support file size more than one page. For example, offset could be
>= 4096.
This patch introduces cpumap_print_bitmask/list_to_buf() and their bitmap
infrastructure bitmap_print_bitmask/list_to_buf() so that those drivers
can move to bin_attribute to support large bitmask and list. At the same
time, we have to pass those corresponding parameters such as offset, count
from bin_attribute to this new API.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: "Ma, Jianpeng" <jianpeng.ma@intel.com>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20210806110251.560-2-song.bao.hua@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix some spelling mistakes in comments found by "codespell":
Hoever ==> However
poiter ==> pointer
representaion ==> representation
uppon ==> upon
independend ==> independent
aquired ==> acquired
mis-match ==> mismatch
scrach ==> scratch
struture ==> structure
Analagous ==> Analogous
interation ==> iteration
And some were discovered manually by Joe Perches and Christoph Lameter:
stroed ==> stored
arch independent ==> an architecture independent
A example structure for ==> Example structure for
Link: https://lkml.kernel.org/r/20210609150027.14805-2-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Christoph Lameter <cl@gentwo.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Implement concurrent TLB flushes, which overlaps the local TLB flush with the
remote TLB flush. In testing this improved sysbench performance measurably by
a couple of percentage points, especially if TLB-heavy security mitigations
are active.
- Further micro-optimizations to improve the performance of TLB flushes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3Cyp
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 tlb updates from Ingo Molnar:
"The x86 MM changes in this cycle were:
- Implement concurrent TLB flushes, which overlaps the local TLB
flush with the remote TLB flush.
In testing this improved sysbench performance measurably by a
couple of percentage points, especially if TLB-heavy security
mitigations are active.
- Further micro-optimizations to improve the performance of TLB
flushes"
* tag 'x86-mm-2021-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Micro-optimize smp_call_function_many_cond()
smp: Inline on_each_cpu_cond() and on_each_cpu()
x86/mm/tlb: Remove unnecessary uses of the inline keyword
cpumask: Mark functions as pure
x86/mm/tlb: Do not make is_lazy dirty for no reason
x86/mm/tlb: Privatize cpu_tlbstate
x86/mm/tlb: Flush remote and local TLBs concurrently
x86/mm/tlb: Open-code on_each_cpu_cond_mask() for tlb_is_not_lazy()
x86/mm/tlb: Unify flush_tlb_func_local() and flush_tlb_func_remote()
smp: Run functions concurrently in smp_call_function_many_cond()
Introduce a cpumask that indicates (for each CPU) what direction the
CPU hotplug is currently going. Notably, it tracks rollbacks. Eg. when
an up fails and we do a roll-back down, it will accurately reflect the
direction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.151441252@infradead.org
Prepare for addition of another mask. Primarily a code movement to
avoid having to create more #ifdef, but while there, convert
everything with an argument to an inline function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Link: https://lkml.kernel.org/r/20210310150109.045447765@infradead.org
cpumask_next_and() and cpumask_any_but() are pure, and marking them as
such seems to generate different and presumably better code for
native_flush_tlb_multi().
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20210220231712.2475218-8-namit@vmware.com
Replace a bunch of cpumask_any*() instances with
cpumask_any*_distribute(), by injecting this little bit of random in
cpu selection, we reduce the chance two competing balance operations
working off the same lowest_mask pick the same CPU.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Link: https://lkml.kernel.org/r/20201023102347.190759694@infradead.org
Currently, when updating the affinity of tasks via either cpusets.cpus,
or, sched_setaffinity(); tasks not currently running within the newly
specified mask will be arbitrarily assigned to the first CPU within the
mask.
This (particularly in the case that we are restricting masks) can
result in many tasks being assigned to the first CPUs of their new
masks.
This:
1) Can induce scheduling delays while the load-balancer has a chance to
spread them between their new CPUs.
2) Can antogonize a poor load-balancer behavior where it has a
difficult time recognizing that a cross-socket imbalance has been
forced by an affinity mask.
This change adds a new cpumask interface to allow iterated calls to
distribute within the intersection of the provided masks.
The cases that this mainly affects are:
- modifying cpuset.cpus
- when tasks join a cpuset
- when modifying a task's affinity via sched_setaffinity(2)
Signed-off-by: Paul Turner <pjt@google.com>
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Tested-by: Qais Yousef <qais.yousef@arm.com>
Link: https://lkml.kernel.org/r/20200311010113.136465-1-joshdon@google.com
Re-evaluating the bitmap wheight of the online cpus bitmap in every
invocation of num_online_cpus() over and over is a pretty useless
exercise. Especially when num_online_cpus() is used in code paths
like the IPI delivery of x86 or the membarrier code.
Cache the number of online CPUs in the core and just return the cached
variable. The accessor function provides only a snapshot when used without
protection against concurrent CPU hotplug.
The storage needs to use an atomic_t because the kexec and reboot code
(ab)use set_cpu_online() in their 'shutdown' handlers without any form of
serialization as pointed out by Mathieu. Regular CPU hotplug usage is
properly serialized.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091622590.1634@nanos.tec.linutronix.de
The IPI code of x86 needs to evaluate whether the target cpumask is equal
to the cpu_online_mask or equal except for the calling CPU.
To replace the current implementation which requires the usage of a
temporary cpumask, which might involve allocations, add a new function
which compares a cpumask to the result of two other cpumasks which are
or'ed together before comparison.
This allows to make the required decision in one go and the calling code
then can check for the calling CPU being set in the target mask with
cpumask_test_cpu().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105220.585449120@linutronix.de
Linus Torvalds
Dave Chinner
Andy Shevchenko
Yury Norov
Peter Zijlstra
Tetsuo Handa
Valentin Schneider
Phil Auld
Sander Vanheule
Borislav Petkov
Tobias Klauser
Tian Tao
Zhen Lei
Nadav Amit
Paul Turner
Alexey Dobriyan
Thomas Gleixner