The current HDMI codec driver code manages the jack detection in two
different ways: for Intel codecs with audio component, the driver
creates snd_jack objects by itself while the standard hda_jack stuff
is used for the rest. This was basically because the audio component
doesn't need the pin sense reading and the unsol event handling, hence
it just needs to report the corresponding jacks directly.
It was a bit messy but not too messy until the driver got DP-MST
support for Nvidia that re-uses the part of dyn_pcm_assign feature
while keeping the pin sense and the unsol event handling. Now, for
DP-MST, we use hda_jack for pin sensing and unsol events but use the
own snd_jack objects. Meanwhile for non-DP-MST, hda_jack is used for
pin sense and unsol events, and the jacks are bound on hda_jack.
Moreover, there is a polling mode support where the unsol event isn't
used. For those, we also have special handling.
For simplifying those messes, this patch unifies the snd_jack handling
over all generic HDMI codes. The driver creates snd_jack objects just
like Intel codecs did in the past but now for all devices. For the
system without audio component binding, we still need the pin sense
and the unsol event handling, and those are still done with the
hda_jack table as before. But hda_jack is no longer used for the
actual snd_jack handling.
Since the hda_jack is no longer used for jack reporting, we removed
snd_hda_jack_report_sync() calls, which also allowed to simplify the
return type of hda_present_sense() and co. pin_idx_to_pcm_jack() was
simplified as well because it behaves same for all cases now.
Note that the hda_jack is still used for the simple HDMI codecs; they
are really simple enough, so no big reason to change intrusively.
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass hda_jack_tbl object to hdmi_intrinsic_event() along with res from
hdmi_unsol_event() so that we can reduce the lookup of the same
hda_jack_tbl object again.
Minor code refactoring.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20200206162804.4734-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
RIRB interrupt status getting cleared after the write pointer is read
causes a race condition, where last response(s) into RIRB may remain
unserviced by IRQ, eventually causing azx_rirb_get_response to fall
back to polling mode. Clearing the RIRB interrupt status ahead of
write pointer access ensures that this condition is avoided.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Viswanath L <viswanathl@nvidia.com>
Link: https://lore.kernel.org/r/1580983853-351-1-git-send-email-viswanathl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP want to keep BIOS verb table for release platform.
So, it need to add 0x19 pin for quirk.
Fixes: 5af29028fd ("ALSA: hda/realtek - Add Headset Mic supported for HP cPC")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/74636ccb700a4cbda24c58a99dc430ce@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If dyn_pcm_assign is set, different jack objects are being created
for pcm and pins.
If dyn_pcm_assign is set, generic_hdmi_build_jack() calls into
add_hdmi_jack_kctl() to create and track separate jack object for
pcm. Like sync_eld_via_acomp(), hdmi_present_sense_via_verbs() also
need to report status change of the pcm jack.
Rename pin_idx_to_jack() to pin_idx_to_pcm_jack(). Update
hdmi_present_sense_via_verbs() to report plug state of pcm jack
object. Unlike sync_eld_via_acomp(), for !acomp drivers the pcm
jack's plug state must be consistent with plug state
of pin's jack.
Fixes: 5398e94fb7 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
Reported-and-tested-by: Martin Regner <martin@larkos.de>
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200204102746.1356-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Thinkpad T420s uses the same codec as T420, so apply the
same quirk to enable audio output on a docking station.
Signed-off-by: Peter Große <pegro@friiks.de>
Link: https://lore.kernel.org/r/20200122180106.9351-1-pegro@friiks.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The initial snd_hda_get_sub_node() can fail on certain
devices (e.g. some Chromebook models using Intel GLK).
The failure rate is very low, but as this is is part of
the probe process, end-user impact is high.
In observed cases, related hardware status registers have
expected values, but the node query still fails. Retrying
the node query does seem to help, so fix the problem by
adding retry logic to the query. This does not impact
non-Intel platforms.
BugLink: https://github.com/thesofproject/linux/issues/1642
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200120160117.29130-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It turned out that the recent simplification of HD-audio bus access
helpers caused a regression on the virtual HD-audio device on QEMU
with ARM platforms. The driver got a CORB/RIRB timeout and couldn't
probe any codecs.
The essential difference that caused a problem was the enforced
aligned MMIO accesses by simplification. Since snd-hda-tegra driver
is enabled on ARM, it enables CONFIG_SND_HDA_ALIGNED_MMIO, which makes
the all HD-audio drivers using the aligned MMIO accesses. While this
is mandatory for snd-hda-tegra, it seems that snd-hda-intel on ARM
gets broken by this access pattern.
For addressing the regression, this patch introduces a new flag,
aligned_mmio, to hdac_bus object, and applies the aligned MMIO only
when this flag is set. This change affects only platforms with
CONFIG_SND_HDA_ALIGNED_MMIO set, i.e. mostly only for ARM platforms.
Unfortunately the patch became a big bigger than it should be, just
because the former calls didn't take hdac_bus object in the argument,
hence we had to extend the call patterns.
Fixes: 19abfefd4c ("ALSA: hda: Direct MMIO accesses")
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1161152
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120104127.28985-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AD HD-audio codec driver has a few code lines invoking
snd_get_num_conns() and using its return value as the array index
without checking. This is basically safe in all those places; at the
second and later calls snd_get_num_conns() returns the value cached
from the first invocation, hence the value is always consistent.
However, it looks a bit confusing as if a lack of the proper check.
This patch introduces a new field num_smux_conns in ad198x_spec for
simplifying the code. Now we store and refer to the value more
locally without invoking the extra function at each time.
Reported-by: Colin King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200115100035.22511-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
make W=1 reports the following warnings, fix as suggested
sound/pci/hda/patch_hdmi.c: In function ‘hdmi_non_intrinsic_event’:
sound/pci/hda/patch_hdmi.c:824:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
824 | ;
| ^
sound/pci/hda/patch_hdmi.c:826:3: warning: suggest braces around empty
body in an ‘if’ statement [-Wempty-body]
826 | ;
| ^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200113211405.28070-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
GCC reports the following warning with W=1
sound/pci/hda/patch_realtek.c: In function ‘alc269_suspend’:
sound/pci/hda/patch_realtek.c:3616:29: warning: suggest braces around
empty body in an ‘if’ statement [-Wempty-body]
3616 | alc5505_dsp_suspend(codec);
| ^
sound/pci/hda/patch_realtek.c: In function ‘alc269_resume’:
sound/pci/hda/patch_realtek.c:3651:28: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
3651 | alc5505_dsp_resume(codec);
| ^
This is a classic macro problem and can indeed lead to bad program
flows.
Fix by using the usual "do { } while (0)" pattern
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200111214736.3002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got quite a few bug reports showing the SOF driver being loaded
unintentionally recently, and the reason seems to be that users didn't
know the module option change: with the recent kernel, a new option
dsp_driver=1 has to be passed to a new module snd-intel-dspcfg
instead of snd_hda_intel.dmic_detect=0 option.
That is, actually there are two tricky things here:
- We changed the whole detection in another module and another
option semantics.
- The existing option for skipping the DSP probe was also renamed.
For avoiding the confusion and giving user more hint, this patch
reverts the renamed option dsp_driver back to dmic_detect for
snd-hda-intel module, and show the warning about the module option
change when the non-default value is passed.
Fixes: 82d9d54a6c ("ALSA: hda: add Intel DSP configuration / probe code")
Link: https://lore.kernel.org/r/20200109082000.26729-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup
applied for X1 Carbon 7th gen in commit d2cd795c4e ("ALSA: hda -
fixup for the bass speaker on Lenovo Carbon X1 7th gen").
Signed-off-by: Kailang Yang <kailang@realtek.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Set EAPD control to verb control.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply const prefix to the remaining possible places: the string
tables, the rate tables, the verb tables, the index tables, etc.
Just for minor optimization and no functional changes.
Link: https://lore.kernel.org/r/20200105144823.29547-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell E7xx laptops have also mic mute LED that is driven by the
dell-laptop platform driver. Bind it with the capture control as
already done for other models.
A caveat is that the fixup hook for the mic mute LED has to be applied
at last, otherwise it results in the invalid override of the callback.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205529
Link: https://lore.kernel.org/r/20200105081119.21396-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current implementation of ALSA control API fully relies on the
callbacks of each driver, and there is no verification of the values
passed via API. This patch is an attempt to improve the situation
slightly by adding the validation code for the values stored via info
and get callbacks.
The patch adds a new kconfig, CONFIG_SND_CTL_VALIDATION. It depends
on CONFIG_SND_DEBUG and off as default since the validation would
require a slight overhead including the additional call of info
callback at each get callback invocation.
When this config is enabled, the values stored by each info callback
invocation are verified, namely:
- Whether the info type is valid
- Whether the number of enum items is non-zero
- Whether the given info count is within the allowed boundary
Similarly, the values stored at each get callback are verified as
well:
- Whether the values are within the given range
- Whether the values are aligned with the given step
- Whether any further changes are seen in the data array over the
given info count
The last point helps identifying a possibly invalid data type access,
typically a case where the info callback declares the type being
SNDRV_CTL_ELEM_TYPE_ENUMERATED while the get/put callbacks store
the values in value.integer.value[] array.
When a validation fails, the ALSA core logs an error message including
the device and the control ID, and the API call also returns an
error. So, with the new validation turned on, the driver behavior
difference may be visible on user-space, too -- it's intentional,
though, so that we can catch an error more clearly.
The patch also introduces a new ctl access type,
SNDRV_CTL_ELEM_ACCESS_SKIP_CHECK. A driver may pass this flag with
other access bits to indicate that the ctl element won't be verified.
It's useful when a driver code is specially written to access the data
greater than info->count size by some reason. For example, this flag
is actually set now in HD-audio HDMI codec driver which needs to clear
the data array in the case of the disconnected monitor.
Also, the PCM channel-map helper code is slightly modified to avoid
the false-positive hit by this validation code, too.
Link: https://lore.kernel.org/r/20200104083556.27789-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_pci_quirk tables are referred as read-only, hence they can be
declared as const gracefully.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-58-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Most of snd_kcontrol_new definitions are read-only and passed as-is.
Let's declare them as const for further optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-37-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now we may declare const for snd_device_ops definitions, so let's do
it for optimization.
There should be no functional changes by this patch.
Link: https://lore.kernel.org/r/20200103081714.9560-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The azx_pcm_hw structure is only copied into another structure,
so make it const.
The opportunity for this change was found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/1577864614-5543-3-git-send-email-Julia.Lawall@inria.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.
Fixes: 436e25505f ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Klaus Ethgen reported occasional high CPU usages in his system that
seem caused by HD-audio driver. The perf output revealed that it's
in the unsolicited event handling in the workqueue, and the problem
seems triggered by some communication stall between the controller and
the codec at the runtime or system resume.
Actually a similar phenomenon was seen in the past for other Intel
platforms, and we already applied the workaround to enforce sync-write
for CORB/RIRB verbs for Skylake and newer chipsets (commit
2756d9143a "ALSA: hda - Fix intermittent CORB/RIRB stall on Intel
chips"). Fortunately, the same workaround is applicable to the old
chipset, and the experiment showed the positive effect.
Based on the experiment result, this patch enables the sync-write
workaround for all Intel chipsets. The only reason I hesitated to
apply this workaround was about the possibly slightly higher CPU usage.
But if the lack of sync causes a much severer problem even for quite
old chip, we should think this would be necessary for all Intel chips.
Reported-by: Klaus Ethgen <Klaus@ethgen.ch>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191223171833.GA17053@chua
Link: https://lore.kernel.org/r/20191223221816.32572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
You can't use PCI_BASE_CLASS with pci_get_class(). This
happens to work by luck on devices with PCI_CLASS_DISPLAY_VGA, but
misses PCI_CLASS_DISPLAY_OTHER. Add a check for those as well.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191221001702.1338587-1-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Taking the 5.5 devel branch back into the main devel branch.
A USB-audio fix needs to be adjusted to adapt the changes that have
been formerly applied for stop_sync.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=58V0
-----END PGP SIGNATURE-----
Merge tag 'y2038-alsa-v8-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into for-next
ALSA: Fix year 2038 issue for sound subsystem
This is a series I worked on with Baolin in 2017 and 2018, but we
never quite managed to finish up the last pieces. During the
ALSA developer meetup at ELC-E 2018 in Edinburgh, a decision was
made to go with this approach for keeping best compatibility
with existing source code, and then I failed to follow up by
resending the patches.
Now I have patches for all remaining time_t uses in the kernel,
so it's absolutely time to revisit them. I have done more
review of the patches myself and found a couple of minor issues
that I have fixed up, otherwise the series is still the same as
before.
Conceptually, the idea of these patches is:
- 64-bit applications should see no changes at all, neither
compile-time nor run-time.
- 32-bit code compiled with a 64-bit time_t currently
does not work with ALSA, and requires kernel changes and/or
sound/asound.h changes
- Most 32-bit code using these interfaces will work correctly
on a modified kernel, with or without the uapi header changes.
- 32-bit code using SNDRV_TIMER_IOCTL_TREAD requires the
updated header file for 64-bit time_t support
- 32-bit i386 user space with 64-bit time_t is broken for
SNDRV_PCM_IOCTL_STATUS, SNDRV_RAWMIDI_IOCTL_STATUS and
SNDRV_PCM_IOCTL_SYNC_PTR because of i386 alignment. This is also
addressed by the updated uapi header.
- PCM mmap is currently supported on native x86 kernels
(both 32-bit and 64-bit) but not for compat mode. This series breaks
the 32-bit native mmap support for 32-bit time_t, but instead allows
it for 64-bit time_t on both native and compat kernels. This seems to
be the best trade-off, as mmap support is optional already, and most
32-bit code runs in compat mode anyway.
- I've tried to avoid breaking compilation of 32-bit code
as much as possible. Anything that does break however is likely code
that is already broken on 64-bit time_t and needs source changes to
fix them.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git y2038-alsa-v8
[2] https://lore.kernel.org/lkml/CAK8P3a2Os66+iwQYf97qh05W2JP8rmWao8zmKoHiXqVHvyYAJA@mail.gmail.com/T/#m6519cb07cfda08adf1dedea6596bb98892b4d5dc
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes since v7: (Arnd):
- Fix a typo found by Ben Hutchings
Changes since v6: (Arnd):
- Add a patch to update the API versions
- Hide a timespec reference in #ifndef __KERNEL__ to remove the
last reference to time_t
- Use a more readable way to do padding and describe it in the
changelog
- Rebase to linux-5.5-rc1, changing include/sound/soc-component.h
and sound/drivers/aloop.c as needed.
Changes since v5 (Arnd):
- Rebased to linux-5.4-rc4
- Updated to completely remove timespec and time_t references from alsa
- found and fixed a few bugs
Changes since v4 (Baolin):
- Add patch 5 to change trigger_tstamp member of struct snd_pcm_runtime.
- Add patch 8 to change internal timespec.
- Add more explanation in commit message.
- Use ktime_get_real_ts64() in patch 6.
- Split common code out into a separate function in patch 6.
- Fix tu->tread bug in patch 6 and remove #if __BITS_PER_LONG == 64 macro.
Changes since v3:
- Move struct snd_pcm_status32 to pcm.h file.
- Modify comments and commit message.
- Add new patch2 ~ patch6.
Changes since v2:
- Renamed all structures to make clear.
- Remove CONFIG_X86_X32 macro and introduced new compat_snd_pcm_status64_x86_32.
Changes since v1:
- Add one macro for struct snd_pcm_status_32 which only active in 32bits kernel.
- Convert pcm_compat.c to use struct snd_pcm_status_64.
- Convert pcm_native.c to use struct snd_pcm_status_64.
We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better. But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.
OK, OK, let's be softy, downgrade it to the standard dev_err() again.
Fixes: dd65f7e19c ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit e38e486d66 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices. Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.
This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.
Fixes: e38e486d66 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes: 15c2b3cc09 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes: a73d511c48 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now most of the get_response handling became quite similar between
HDA-core and legacy drivers, and the only differences are:
- the handling of extra-long polling delay for some codecs
- the debug message for the stalled communication
and both are worth to share in the common code.
This patch unifies the code into snd_hdac_bus_get_response(), and use
this from the legacy get_response callback. It results in a good
amount of code reduction in the end.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191212191101.19517-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Forgot to remove the variable declaration as well in the last commit.
sound/pci/hda/hda_tegra.c: In function 'hda_tegra_runtime_suspend':
sound/pci/hda/hda_tegra.c:169:19: warning: unused variable 'bus' [-Wunused-variable]
Fixes: f36da9406e ("ALSA: hda: Support PCM sync_stop")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20191212080518.6522-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since timespec is not year 2038 safe on 32bit system, and we need to
convert all timespec variables to timespec64 type for sound subsystem.
This patch is used to do preparation for following patches, that will
convert all structures defined in uapi/sound/asound.h to use 64-bit
time_t.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The driver invokes snd_pcm_period_elapsed() simply from the interrupt
handler. Set card->sync_irq for enabling the missing sync_stop PCM
operation. It's cleared and reset dynamically at IRQ re-acquiring for
the PM resume, too.
Link: https://lore.kernel.org/r/20191210063454.31603-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Clean up the common driver module with the new managed buffer
allocation API. The superfluous snd_pcm_lib_malloc_pages() and
snd_pcm_lib_free_pages() calls are dropped.
Link: https://lore.kernel.org/r/20191209094943.14984-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HD-audio CORB/RIRB communication was programmed in a way that was
documented in the reference in decades ago, which is essentially a
polling in the waiter side. It's working fine but costs CPU cycles on
some platforms that support only slow communications. Also, for some
platforms that had unreliable communications, we put longer wait time
(2 ms), which accumulate quite long time if you execute many verbs in
a shot (e.g. at the initialization or resume phase).
This patch attempts to improve the situation by introducing the
standard waitqueue in the RIRB waiter side instead of polling. The
test results on my machine show significant improvements. The time
spent for "cat /proc/asound/card*/codec#*" were changed like:
* Intel SKL + Realtek codec
before the patch:
0.00user 0.04system 0:00.10elapsed 40.0%CPU
after the patch:
0.00user 0.01system 0:00.10elapsed 10.0%CPU
* Nvidia GP107GL + Nvidia HDMI codec
before the patch:
0.00user 0.00system 0:02.76elapsed 0.0%CPU
after the patch:
0.00user 0.00system 0:00.01elapsed 17.0%CPU
So, for Intel chips, the total time is same, while the total time is
greatly reduced (from 2.76 to 0.01s) for Nvidia chips.
The only negative data here is the increase of CPU time for Nvidia,
but this is the unavoidable cost for faster wakeups, supposedly.
Link: https://lore.kernel.org/r/20191210145727.22054-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nicholas Johnson reports a null pointer deref as well as a refcount
underflow upon hot-removal of a Thunderbolt-attached AMD eGPU.
He's bisected the issue down to commit 586bc4aab8 ("ALSA: hda/hdmi -
fix vgaswitcheroo detection for AMD").
The commit iterates over PCI devices using pci_get_class() and
unreferences each device found, even though pci_get_class()
subsequently unreferences the device as well. Fix it.
Fixes: 586bc4aab8 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/r/PSXP216MB0438BFEAA0617283A834E11580580@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM/
Reported-and-tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexander Deucher <alexander.deucher@amd.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/77aa6c01aefe1ebc4004e87b0bc714f2759f15c4.1575985006.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 609f548534 ("ALSA: hda: hdmi - preserve non-MST PCM
routing for Intel platforms") tried to restore the old behavior wrt
assignment of the PCM slot for Intel platforms, but this didn't do it
right. As found in the later discussion, a positive pipe id on Intel
platforms can be passed for single monitor attachment case.
This patch reverts the previous attempt and applies a simpler
workaround instead. Actually, for Intel platforms, we can handle as
if per_pin->dev_id=0, assign the primary slot at the first try. This
assures the compatible behavior with the previous versions regarding
the slot assignment.
Fixes: 609f548534 ("ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms")
Link: https://lore.kernel.org/r/20191203154105.30414-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit in HD-audio stream management for changing the
stripe control seems causing a regression on some platforms. The
stripe control is currently used only by HDMI codec, and applying the
stripe mask unconditionally may lead to scratchy and static noises as
seen on some MacBooks.
For addressing the regression, this patch changes the stream
management code to apply the stripe mask conditionally only when the
codec driver requested.
Fixes: 9b6f7e7a29 ("ALSA: hda: program stripe bits for controller")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Tested-by: Michael Pobega <mpobega@neverware.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which
is without the volume control. I do not see a reason to use DAC2,
because the shared output to all speakers produces the sufficient
and well balanced sound. The stereo support is enough for this
purpose (laptop).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 5398e94fb7 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
introduced a slight change of behaviour how non-MST monitors are
assigned to PCMs on Intel platforms.
In the drm_audio_component.h interface, the third parameter
to pin_eld_notify() is pipe number. On Intel platforms, this value
is -1 for MST. On other platforms, a non-zero pipe id is used to
signal MST use.
This difference leads to some subtle differences in hdmi_find_pcm_slot()
with regards to how non-MST monitors are assigned to PCMs.
This patch restores the original behaviour on Intel platforms while
keeping the new allocation policy on other platforms.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add additional check in hdmi_find_pcm_slot() to not return
a pcm index that points to unallocated pcm. This could happen
if codec driver is set up in codec->mst_no_extra_pcms mode.
On some platforms, this leads to a kernel oops in snd_ctl_notify(),
called via update_eld().
BugLink: https://github.com/thesofproject/linux/issues/1536
Fixes: 5398e94fb7 ALSA: hda - Add DP-MST support for NVIDIA codecs
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've added the bass speaker support on Acer 8951G by the commit
00066e9733 ("Add Acer Aspire Ethos 8951G model quirk"), but it seems
that the GPIO pin was wrongly set: while the commit turns off the bit
to power up the amp, the actual hardware reacts other way round,
i.e. GPIO bit on = amp on.
So this patch fixes the bug, turning on the GPIO bit 0x02 as default.
Since turning on the GPIO bit can be more easily managed with
alc_setup_gpio() call, we simplify the quirk code by integrating the
GPIO setup into the existing alc662_fixup_aspire_ethos_hp() and
dropping the whole ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER quirk.
Fixes: 00066e9733 ("Add Acer Aspire Ethos 8951G model quirk")
Reported-and-tested-by: Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191128202630.6626-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.
Fixes: 4344aec84b ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a706 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix regression in how intel_haswell_fixup_connect_list()
results are used in hda_read_pin_conn(). Use of
snd_hda_get_raw_connections() in hda_read_pin_conn() bypasses
the cache and thus also bypasses the overridden pin connection
list. On platforms that require the connection list fixup,
mux list will be empty and HDMI playback will fail to -EBUSY
at open.
Fix the regression in hda_read_pinn_conn(). Simplify code
as suggested by Takashi Iwai to remove old
intel_haswell_fixup_connect_list() and copy the cvt_nid list
directly and not use snd_hda_override_conn_list() at all.
Fixes: 9c32fea836 ("ALSA: hda - Add DP-MST support for non-acomp codecs")
BugLink: https://github.com/thesofproject/linux/issues/1537
Cc: Nikhil Mahale <nmahale@nvidia.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191127161240.17026-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So that we can power down the GPU and audio to save power.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-5-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-4-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Only enable the vga_switcheroo logic on systems with the
ATPX ACPI method. This logic is not needed for asics
that are not part of a PX (PowerXpress)/HG (Hybrid Graphics)
platform.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-2-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.
Fixes: 60083f9e94 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec may leave codec->relaxed_resume flag set even after
unbinding. Clear it unconditionally.
It's very unlikely that this actually matters in the real use case,
so just a fix for consistency.
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132624.5482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The old Nvidia chips have multiple HD-audio codecs on the same
HD-audio controller, and this doesn't work as expected with the current
audio component binding that is implemented under the one-codec-per-
controller assumption; at the probe time, the driver leads to several
kernel WARNING messages.
For the proper support, we may change the pin2port and port2pin to
traverse the codec list per the given pin number, but this needs more
development and testing.
As a quick workaround, instead, this patch drops the binding in the
audio side for these legacy chips since the audio component support in
nouveau graphics driver is still not merged (hence it's basically
unused).
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205625
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132000.4460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc236
for applying DELL1_MIC_NO_PRESENCE on Dell machines.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc256
for applying DELL1_MIC_NO_PRESENCE on Dell machines.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST support for GK104+ NVIDIA codecs.
GK104+ NVIDIA codecs support DP-MST audio. These codecs have 4
output converters and 4 pin widgets, with 4 device entries per pin
widget for a total of 16 device entries.
This patch moves the existing patch_nvhdmi() definition to
patch_nvhdmi_legacy(), used by pre-GK104 NVIDIA codecs. Redefine
patch_nvhdmi() to enable DP-MST support by setting codec->dp_mst and
spec->dyn_pcm_assign.
Introduce fresh logic for dynamic pcm assignment, making
sure that new pcm assignments are compatible with the legacy static
per_pin-pmc assignment that existed in the days before DP-MST.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-5-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch make it possible for non-acomp codecs to set
dyn_pcm_assign/dp_mst and get DP-MST audio support.
Document change notification HDA040-A for the Intel High Definition
Audio 1.0a specification introduces a Device Select verb for Digital
Display Pin Widgets that are multi-stream capable. This verb selects
a Device Entry that is used by subsequent Pin Widget verbs.
Once the Device Entry is selected, all subsequent Pin Widget verbs
controlling the sink device will be directed to the selected Device
Entry until the Device Select verb is updated with a new value.
These Pin Widget verbs include:
* Connection Select
* Get Connection List Entry
* Amplifier Gain/Mute
* Power State
* Pin Widget Control
* ELD Data
* DIP-Size
* DIP-Index
* DIP-Data
* DIP-XmitCtrl
* Content Protection Control
* ASP Channel Mapping
This patch adds calls to snd_hda_set_dev_select() to direct each of
these Pin Widget control verbs to the correct Device Entry.
snd_hda_get_connections() does not return per-device connection
list, therefore make use snd_hda_get_raw_connections() instead of
snd_hda_get_connections().
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-4-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds DP-MST jack support which will be used on NVIDIA
platforms. Today, DP-MST audio is supported only if the codec has
acomp support. This patch makes it possible to add DP-MST support
for non-acomp codecs.
For the codecs supporting DP-MST audio, each pin can contain several
device entries. Each device entry is a virtual pin, described by
pin_nid and dev_id in struct hdmi_spec_per_pin. For monitor hotplug
event handling, non-acomp codecs enable and register jack-detection
for every hdmi_spec_per_pin.
This patch updates every relevant function in hda_jack.h and its
implementation in hda_jack.c, to consider dev_id along with pin_nid.
Changes to the HD Audio specification to support DP-MST audio are
described in the Intel Document Change Notification (DCN) number
HDA040-A.
From HDA040-A, "For the case of multi stream capable Digital Display
Pin Widget, [the Get Pin Sense verb] can be used to read a specific
Device Entry state as reported in Get Device List Entry verb." This
patch updates the read_pin_sense() function to take the dev_id as an
argument and pass it as a parameter to the Get Pin Sense verb.
Bits 15 through 20 from the Unsolicited Response for intrinsic
events contain the index of the Device Entry that generated the
event. This patch updates the Unsolicited Response event handlers to
extract the device entry index from the response and pass it to
snd_hda_jack_tbl_get_from_tag().
This patch updates snd_hda_jack_tbl_new() to take a dev_id argument
and store it in the jack structure, and to make sure not to generate
a different tag when called more than once for the same nid.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-3-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
s/snd_hda_pin_sense/snd_hda_jack_pin_sense/g
This aligns the snd_hda_pin_sense function name with the names of
other functions in hda_jack.h.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Link: https://lore.kernel.org/r/20191119084710.29267-2-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove the workarounds added in commit fa763f1b28 ("ALSA:
hda - Force polling mode on CNL for fixing codec communication")
and commit a8d7bde23e ("ALSA: hda - Force polling mode on CFL
for fixing codec communication").
The workarounds are no longer needed after the more generic
change done in commit 2756d9143a ("ALSA: hda - Fix intermittent
CORB/RIRB stall on Intel chips"). This change applies to a larger
set of hardware and covers CFL and CNL as well.
Similar change was already done to SOF DSP HDA driver with
no regressions detected.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191115124449.20512-4-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Semantics of port#0 differ between ICL and TGL:
ICL port#0 -> never used for HDAudio
ICL port#1 -> should be mapped to first pin (0x04)
TGL port#0 -> typically not used, but HW has the support,
so should be mapped to first pin (0x04)
TGL port#1 -> should be mapped to 2nd pin (0x06)
Refactor the port mapping logic to allow to take the above
differences into account. Fixes issues with HDAudio on some
TGL platforms.
Co-developed-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191115124449.20512-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new flag in hdmi_spec to indicate the Intel platform-
specific fixups so that we can get rid of the lengthy codec ID
checks. The flag is set in intel_hsw_common_init() commonly.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111190937.19186-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Apply same logic to pin setup as on previous platforms. Fixes
errors in HDMI/DP playback.
Tested with both snd-hda-intel and SOF drivers.
Fixes: 9a11ba7388 ("ALSA: hda: hdmi - add Tigerlake support")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191111133838.21213-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl3EFLYTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0JCuB/40P/KPRGlEFBSJAwTfCkjQxzvQUGBy
Y3w9QeMq3ONhCJt5BusmeuFqdkanzYqnl+NveGYKdKNTAwh6vEMGiMbGSB8dgrR5
R7PLNBDRJi7ZUDdOZle7VrdUiZWyieaZk/ecWxfTPKfqzoBjnM3XYSa30i55hvbQ
A2MTimFsO7nf0caLNBLqEqBjy68IHQ3tuHH27kA0MIpVNsYVrjaWfM400ot3odbg
0vMpNTM+PDcQGkWcq3sKJBOVVjmGg2Xs1yM5hv6Mu+q1zXLCtCKj+Pv+ZXC3BT6e
Yyxv/arpgvtjIU79Tv9RamVRC4jN6ZJRkThP9UW6JrX7tPCjvD+ygzPn
=4FMp
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.5
Some big changes in the core but more about cleanps and refactorings
than new features, plus a collection of new drivers and lots of small
fixes and improvements to existing ones.
- Lots more cleanups from Morimoto-san. Now that everything is a
component this is mostly about refactorings to clarify and simplify
the core, a combination of things that are no longer required due to
refactorings and spotting similarities.
- Many fixes to the Sound Open Firmware code.
- Wake on voice support for Chromebooks.
- SPI support for RT5677.
- New drivers for Analog Devices ADAU7118, Intel Cannonlake systems
with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770.
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39fd1: ALSA: pcm: Handle special page mapping in the
default mmap handler
Link: https://lore.kernel.org/r/20191105151856.10785-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes: 993884f6a2 ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit ade49db337 ("ALSA: hda/hdmi - Allow audio component for
AMD/ATI and Nvidia HDMI") introduced the spec->pcm_lock mutex lock to
the whole generic_hdmi_init() function for avoiding the race with the
audio component registration. However, this caused a dead lock when
the unsolicited event is handled without the audio component, as the
codec gets runtime-resumed in hdmi_present_sense() which is already
inside the spec->pcm_lock in its caller.
For avoiding this deadlock, add a new mutex only for the audio
component binding that is used in both generic_hdmi_init() and the
audio notifier registration where the jack callbacks are handled /
re-registered.
Fixes: ade49db337 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Reported-and-tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/s5himo7i89i.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To support the DP-MST multiple streams via single connector feature,
the HDMI driver was extended with the concept of backup PCMs. See
commit 9152085def ("ALSA: hda - add DP MST audio support").
This implementation works fine with snd_hda_intel.c as PCM topology
is fully managed within the single driver.
When the HDA codec driver is used from ASoC components, the concept
of backup PCMs no longer fits. For ASoC topologies, the physical
HDMI converters are presented as backend DAIs and these should match
with hardware capabilities. The ASoC topology may define arbitrary
PCMs (i.e. frontend DAIs) and have processing elements before eventual
routing to the HDMI BE DAIs. With backup PCMs, the link between
FE and BE DAIs would become dynamic and change when monitors are
(un)plugged. This would lead to modifying the topology every time
hotplug events happen, which is not currently possible in ASoC and
there does not seem to be any obvious benefits from this design.
To overcome above problems and enable the HDMI driver to be used
from ASoC, this patch adds a new mode (mst_no_extra_pcms flags) to
patch_hdmi.c. In this mode, the codec driver does not assume
the backup PCMs to be created.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191029134017.18901-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is an alternative fix attemp for the issue reported in the commit
caa8422d01 ("ALSA: hda: Flush interrupts on disabling") that was
reverted later due to regressions. Instead of tweaking the hardware
disablement order and the enforced irq flushing, do calling
cancel_work_sync() of the unsol work early enough, and explicitly
ignore the unsol events during the shutdown by checking the
bus->shutdown flag.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/s5h1ruxt9cz.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit caa8422d01.
It turned out that this commit caused a regression at shutdown /
reboot, as the synchronize_irq() calls seems blocking the whole
shutdown. Also another part of the change about shuffling the call
order looks suspicious; the azx_stop_chip() call disables the CORB /
RIRB while the others may still need the CORB/RIRB update.
Since the original commit itself was a cargo-fix, let's revert the
whole patch.
Fixes: caa8422d01 ("ALSA: hda: Flush interrupts on disabling")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205333
BugLinK: https://bugs.freedesktop.org/show_bug.cgi?id=111174
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://lore.kernel.org/r/20191028081056.22010-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These 2 ThinkCentres installed a new realtek codec ID 0x623,
it has 2 front mics with the same location on pin 0x18 and 0x19.
Apply fixup ALC283_FIXUP_HEADSET_MIC to change 1 front mic
location to right, then pulseaudio can handle them.
One "Front Mic" and one "Mic" will be shown, and audio output works
fine.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191024114439.31522-1-aaron.ma@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For distributions, we need one place where we can decide
which driver will be activated for the auto-configation of the
Intel's HDA hardware with DSP. Actually, we cover three drivers:
* Legacy HDA
* Intel SST
* Intel Sound Open Firmware (SOF)
All those drivers registers similar PCI IDs, so the first
driver probed from the PCI stack can win. But... it is not
guaranteed that the correct driver wins.
This commit changes Intel's NHLT ACPI module to a common
DSP probe module for the Intel's hardware. All above sound
drivers calls this code. The user can force another behaviour
using the module parameter 'dsp_driver' located in
the 'snd-intel-dspcfg' module.
This change allows to add specific dmi checks for the specific
systems. The examples are taken from the pull request:
https://github.com/thesofproject/linux/pull/927
Tested on Lenovo Carbon X1 7th gen.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022174313.29087-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Nvidia proprietary driver doesn't support runtime power management, so
when a user only wants to use the integrated GPU, it's a common practice
to let dGPU not to bind any driver, and let its upstream port to be
runtime suspended. At the end of runtime suspension the port uses
platform power management to disable power through _OFF method of power
resource, which is listed by _PR3.
After commit b516ea586d ("PCI: Enable NVIDIA HDA controllers"), when
the dGPU comes with an HDA function, the HDA won't be suspended if the
dGPU is unbound, so the power resource can't be turned off by its
upstream port driver.
Commit 37a3a98ef6 ("ALSA: hda - Enable runtime PM only for
discrete GPU") only allows HDA to be runtime suspended once GPU is
bound, to keep APU's HDA working.
However, HDA on dGPU isn't that useful if dGPU is not bound to any
driver. So let's relax the runtime suspend requirement for dGPU's HDA
function, to disable the power source to save lots of power.
BugLink: https://bugs.launchpad.net/bugs/1840835
Fixes: b516ea586d ("PCI: Enable NVIDIA HDA controllers")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20191018073848.14590-2-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai
Mohan Kumar
Kailang Yang
Nikhil Mahale
Yong Zhi
Hans de Goede
Peter Große
Kai Vehmanen
Pierre-Louis Bossart
Michał Mirosław
Julia Lawall
Chris Chiu
Alex Deucher
Baolin Wang
Hui Wang
Lukas Wunner
Jaroslav Kysela
Jian-Hong Pan
Kai-Heng Feng
Chiou, Cooper
Aaron Ma
Pan Xiuli