COMM events are not generated in the context of a guest machine, so the
thread name is never set for the VMM process. For example, the qemu-kvm
name applies to the process in the host machine, not the guest machine.
So, samples for guest machines are currently displayed as:
99.67% :5671 [unknown] [g] 0xffffffff81366b41
where 5671 is the pid of the VMM. With this patch the samples in the guest
machine are shown as:
18.43% [guest/5671] [unknown] [g] 0xffffffff810d68b7
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current debug message is:
Problems creating module maps, continuing anyway...
When running multiple VMs it would be nice to know which machine the
message is referring to:
$ perf kvm --guest --guestmount=/tmp/guest-mount record -av -- sleep 10
Problems creating module maps for guest 6613, continuing anyway...
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1342826756-64663-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The min configs are saved in a perl hash called force_configs, and this
hash is used to add configs to the .config file. But it was not being
reset between tests and a min config from a previous test would affect
the min config of the next test causing undesirable results.
Reset the force_config hash at the start of each test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Under some conditions, c1% was displayed as very large number,
much higher than 100%.
c1% is not measured, it is derived as "that, which is left over"
from other counters. However, the other counters are not collected
atomically, and so it is possible for c1% to be calaculagted as
a small negative number -- displayed as very large positive.
There was a check for mperf vs tsc for this already,
but it needed to also include the other counters
that are used to calculate c1.
Signed-off-by: Len Brown <len.brown@intel.com>
Measuring large profoundly-idle configurations
requires turbostat to be more lightweight.
Otherwise, the operation of turbostat itself
can interfere with the measurements.
This re-write makes turbostat topology aware.
Hardware is accessed in "topology order".
Redundant hardware accesses are deleted.
Redundant output is deleted.
Also, output is buffered and
local RDTSC use replaces remote MSR access for TSC.
From a feature point of view, the output
looks different since redundant figures are absent.
Also, there are now -c and -p options -- to restrict
output to the 1st thread in each core, and the 1st
thread in each package, respectively. This is helpful
to reduce output on big systems, where more detail
than the "-s" system summary is desired.
Finally, periodic mode output is now on stdout, not stderr.
Turbostat v2 is also slightly more robust in
handling run-time CPU online/offline events,
as it now checks the actual map of on-line cpus rather
than just the total number of on-line cpus.
Signed-off-by: Len Brown <len.brown@intel.com>
Usually the target is booted into a dependable kernel when a test
starts. The test will install the test kernel and reboot the box. But
there may be a time that the kernel is running an unreliable kernel and
the reboot may crash.
Have ktest detect crashes on a reboot and force a power-cycle instead.
This can usually happen if a test kernel was installed to run manual
tests, but the user forgot to reboot to the known good kernel.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If the console is constantly outputting content, this can cause ktest
to get stuck waiting on the monitor to settle down.
The option MAX_MONITOR_WAIT is the maximum time (in seconds) for ktest
to wait for the console to flush.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
With a name like 'oldnoconfig' one may think that the config generated
would disable all configs that were not defined (selecting "no" for all
options). But this is not the case. It selects the default. If a config
has a 'default y', then it is added if not specified.
This broke the config bisect, because options not specified by a config
will just use the default, where it expected to turn off. This caused an
option to be enabled that disabled an option that would break the build.
The end result was that we never found the bad config at the end of the
test.
Instead of using 'make oldnoconfig', ktest now builds the options it
expects enabled and disabled. When it turns off an option, it will no
longer remove it, but actually set it to:
# CONFIG_FOO is not set.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The config-bisect can take a bad config and bisect it down to find out
what config actually breaks the config. But as all tests will apply a
minconfig (defined by a user) to apply before booting, it is possible
that the minconfig could actually make the bad config work (minconfigs
can disable configs). The end result is that the config bisect test will
not find a config that breaks. This can be rather frustrating to the
user.
The CONFIG_BISECT_CHECK option, when set to 1, will make sure that the
bad config (with the minconfig applied) still fails before trying to
bisect.
And yes, I did get burned by this.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Add the PRE_INSTALL option that will allow a user to specify a shell
command to be executed before the install operation executes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In order to let the user add commands before and after ktest runs, the
PRE_KTEST and POST_KTEST options are defined. They hold shell commands
that will execute befor ktest runs its first test, as well as when it
completed its last test.
The PRE_TEST and POST_TEST will be run befor and after (respectively)
for a given test. They can either be global (done for all tests) or
defined by a single test.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
. Preparatory patches to use hw events in PMU syntax, from Jiri Olsa
. Remaining backport of trace-cmd's libparseevent, from Namhyung Kim
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=vcUF
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
perf/core improvements and fixes:
- Preparatory patches to use hw events in PMU syntax, from Jiri Olsa
- Remaining backport of trace-cmd's libparseevent, from Namhyung Kim
- Fix libtraceevent 'clean' make target, from Namhyung Kim
- Teach ctags about libtraceevent error codes, from Namhyung Kim
- Fix libtraceevent dependency files usage, from Namhyung Kim
- Support hex number pretty printing in libtraceevent, fixing
kvm output, from Namhyung Kim
- Kill some die() usage in libtraceevent, from Namhyung Kim
- Improve support for hw breakpoints parsing/pretty printing/testing,
from Jiri Olsa
- Clarify perf bench option naming, from Hitoshi Mitake
- Look for ".note" ELF notes too, used in the kernel vdso, from Jiri Olsa
- Fix internal PMU list usage, removing leak, from Robert Richter
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It'll be convenient in upcoming patch to access hw event symbols
strings via enum perf_hw_id indexes. In order not to duplicate
the data, creating two separate arrays:
event_symbols_hw for enum perf_hw_id events
event_symbols_sw for enum perf_sw_ids events
Changing the current event list code to follow the change.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1341352848-11833-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Spliting PE_VALUE_SYM token to PE_VALUE_SYM_HW and PE_VALUE_SYM_SW
tokens to separate hardware and software symbols.
This will be useful in upcomming patch where we want to be able to parse
out only hardware events.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1341352848-11833-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The flex generator prints out each input character that is ignored by
lex rules.
Since the alias processing, we can have '\n' characters on input. We
need to assign empty rule to it, so it's not printed out.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1341352848-11833-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use ARRAY_SIZE instead of defining the sizes separately for each test
arrays.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1341352848-11833-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The if branch is completely unnecessary since 'realloc' can handle
NULL pointers for the first parameter.
This patch is just an adoption of Ulrich Drepper's recent patch on
perf tools.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1335230984-7613-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In the current code we assign vsize=8 and then fall through to the
default and assign vsize=1. -> probably the break is missing here,
otherwise we can remove the case.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-3fxjy46h2tr9pl0spv7tems6@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The arg_to_str() can fail so we should handle that case properly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1335157118-14658-12-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The malloc can fail so the return value should be checked. For now,
just use malloc_or_die().
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1335157118-14658-10-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Update and add missing argument descriptions and fix some typo on
function comments.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1335157118-14658-9-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When memory allocation for the field name is failed, do not goto
event_failed since we added the event already.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1335157118-14658-8-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It seems PEVENT_FUNC_ARG_STRING missed passing the allocated string to
the args array. Fix it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1335157118-14658-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The realloc can fail so that we should handle it properly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1333940074-19052-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There were some places didn't check return value of the strdup and had
unneeded/duplicated checks. Fix it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1333940074-19052-5-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The __read_token() function has some duplicated code to handle
internal buffer overflow. Factor them out to new extend_token().
According to the man pages of realloc/free(3), they can handle NULL
pointer input so that it can be ended up to compact the code. Also
handle error path correctly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1333940074-19052-4-git-send-email-namhyung.kim@lge.com
[rostedt@goodmis.org: added some extra whitespace]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The printk_cmp function should use printk_map instead of func_map.
Also rename the variables for consistency.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1333940074-19052-3-git-send-email-namhyung.kim@lge.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
On 32 bit systems, a conversion of the trace_printk format string
"%lu" -> "%llu" is intended (similar for %lx etc.) when a trace was
taken on a machine with 64 bit long integers. However, the current
code computes the bogus transformation "%lu" -> "%u". Fix this.
Besides that, the transformation is only required on systems that don't
use 64 bits for long integers natively.
Signed-off-by: Wolfgang Mauerer <wolfgang.mauerer@siemens.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1332411501-8059-3-git-send-email-wolfgang.mauerer@siemens.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When %pM is used, the arg value must be a 6 byte character that will
be printed as a 6 byte MAC address. But the code does a break over the
main code which updates the current processing arg to point to the
next arg. If there are other print arguments after a %pM, they will be
off by one. The next arg will still be processing the %pM arg.
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-q3g0n1espikynsdkpbi6ue6t@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The RT kernel added a migrate disable counter in all events. Add
support to show this in the latency format.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-l6ulxyda952g7kua4pfsh73k@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The arg notation of '*' in bprintks is not handled by the parser.
Implement it so that they show up properly in the output and do not
kill the tracer from reporting events.
Reported-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-t0ctq7t1xz3ud6wv4v886jou@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As a pointer can be converted into a function name, let the filters
work with the function name as well as with the pointer number. If
the comparison expects a string, then convert numbers into functions,
but only when the number is the same size as a long.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-oxsa1qkr2eq7u8d7r0aapedu@git.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
In function slab_stats(), if total_free is equal zero, it will error.
So fix it.
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
As Namhyung Kim pointed, there are confused namings and descriptions of words
"cycle" and "clock" in mem-memset.c and mem-memcpy.c.
With the option "-c" (or "--clock", now renamed as "--cycle"), mem subsystem
measures cost of memset() and memcpy() with cpu-cycles event.
But current mem subsystem source code contains lots of confused variable
namings and descriptions with "clock" (e.g. the variable use_clock). This is a
very bad style because there is another software event named "cpu-clock". This
patch replaces wrong usage of "clock" to "cycle".
v2: modified Documentation/perf-bench.txt for the descriptions of
--cycle option
Signed-off-by: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1341236777-18457-1-git-send-email-h.mitake@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the guestmount option on record:
$ perf kvm --guest --host --guestmount=/tmp/guest-mount record -ag
But not the subsequent report:
$ perf kvm report
causes a SEGFAULT in the usual place:
(gdb) bt
0 0x0000000000470356 in machine__mmap_name (self=0x0, bf=0x7fffffffbdb0 " z\370\367\377\177", size=
4096) at util/map.c:712
1 0x00000000004453e8 in perf_event__process_kernel_mmap (tool=0x7fffffffde10, event=0x7ffff7f87e38,
machine=0x0) at util/event.c:550
2 0x00000000004458c9 in perf_event__process_mmap (tool=0x7fffffffde10, event=0x7ffff7f87e38, sample=
0x7fffffffd2a0, machine=0x0) at util/event.c:656
3 0x00000000004733e0 in perf_session_deliver_event (session=0x91aca0, event=0x7ffff7f87e38, sample=
0x7fffffffd2a0, tool=0x7fffffffde10, file_offset=7736) at util/session.c:979
...
The MMAP events in this case already contain the full path to the
module. No need to require it for the report path to.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1341241977-71535-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 743eb86865 reworked when the
machines were created. Prior to this commit guest machines could be
created in perf_event__process_kernel_mmap() while processing kernel
MMAP events. This commit assumes that the machines exist by the time
perf_session_deliver_event is called (e.g., during processing of build
id events) - which is not always correct.
One example is the use of default guest args (--guestkallsyms and
--guestmodules) for short times where no samples hit within a guest
module. For this case no build id is added to the file header. No build
id == no machine created. That leads to the next example -- the use of
no-buildid (-B) on the record for all perf-kvm invocations. In both
cases perf report dies with a SEGFAULT of the form:
(gdb) bt
0 0x000000000046dd7b in machine__mmap_name (self=0x0, bf=0x7fffffffbd20 "q\021", size=4096) at util/map.c:715
1 0x0000000000444161 in perf_event__process_kernel_mmap (tool=0x7fffffffdd80, event=0x7ffff7fb4120, machine=0x0) at util/event.c:562
2 0x0000000000444642 in perf_event__process_mmap (tool=0x7fffffffdd80, event=0x7ffff7fb4120, sample=0x7fffffffd210, machine=0x0)
at util/event.c:668
3 0x0000000000470e0b in perf_session_deliver_event (session=0x915ca0, event=0x7ffff7fb4120, sample=0x7fffffffd210, tool=0x7fffffffdd80,
file_offset=8480) at util/session.c:979
4 0x000000000047032e in flush_sample_queue (s=0x915ca0, tool=0x7fffffffdd80) at util/session.c:679
5 0x0000000000471c8d in __perf_session__process_events (session=0x915ca0, data_offset=400, data_size=150448, file_size=150848, tool=
0x7fffffffdd80) at util/session.c:1363
6 0x0000000000471d42 in perf_session__process_events (self=0x915ca0, tool=0x7fffffffdd80) at util/session.c:1379
7 0x000000000042484a in __cmd_report (rep=0x7fffffffdd80) at builtin-report.c:368
8 0x0000000000425bf1 in cmd_report (argc=0, argv=0x915b00, prefix=0x0) at builtin-report.c:756
9 0x0000000000438505 in __cmd_report (argc=4, argv=0x7fffffffe260) at builtin-kvm.c:84
10 0x000000000043882a in cmd_kvm (argc=4, argv=0x7fffffffe260, prefix=0x0) at builtin-kvm.c:131
11 0x00000000004152cd in run_builtin (p=0x7a54e8, argc=9, argv=0x7fffffffe260) at perf.c:273
12 0x00000000004154c7 in handle_internal_command (argc=9, argv=0x7fffffffe260) at perf.c:345
13 0x0000000000415613 in run_argv (argcp=0x7fffffffe14c, argv=0x7fffffffe140) at perf.c:389
14 0x0000000000415899 in main (argc=9, argv=0x7fffffffe260) at perf.c:487
Fix by allowing the machine to be created in perf_session_deliver_event.
Tested with --guestmount option and default guest args, with and without
-B arg on record for both and for short (10 seconds) and long (10
minutes) windows.
Reported-by: Pradeep Kumar Surisetty <psuriset@linux.vnet.ibm.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pradeep Kumar Surisetty <psuriset@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1341180697-64515-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consider the commands:
perf record -e sched:sched_switch -fo /tmp/perf.data -a -- sleep 1
perf script -i /tmp/perf.data
In v3.4 the output has the form (lines wrapped here)
perf 29214 [005] 821043.582596: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
In 3.5 that same line has become:
perf 29214 [005] 821043.582596: sched_switch:
<...>-29214 [005] 0.000000000: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
Note the duplicates in the output -- pid, cpu, event name. With
this patch the v3.4 output is restored:
perf 29214 [005] 821043.582596: sched_switch:
prev_comm=perf prev_pid=29214 prev_prio=120
prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
v3:
Remove that pesky newline too. Output now matches v3.4 (pre-libtracevent).
v2:
Change print_trace_event function local to perf per Steve's comments.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1339698977-68962-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding '.note' section name to be check when looking for notes section.
The '.note' name is used by kernel VDSO.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1340120894-9465-15-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The internal pmu list was never used. With each perf_pmu__find() call
the pmu structure was created new by parsing sysfs. Beside this it
caused memory leaks. We now keep all pmus by adding them to the list.
Also, pmu_lookup() should return pmus that do not expose the format
specifier in sysfs.
We need a valid internal pmu list in a later patch to iterate over all
pmus that exist in the system.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1339706321-8802-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding hw breakpoint events hook in the perf_evsel__name function, to
display event names properly all over the perf tools.
Updated hw breakpoints events tests.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340918329-3012-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing the hw breakpoint's type modifier parsing to allow all possible
combinations of 'rwx' characters.
Adding automated tests to the parsing test suite.
Reported-by: Jovi Zhang <bookjovi@gmail.com>
Original-patch-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120629072254.GA940@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because the only caller of the alloc_event() (pevent_parse_event) checks
return value properly, it can be changed to use plain malloc.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1339396133-9839-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the __print_hex() function is used in print fmt now, add
corresponding parser routines. This makes the output of perf script on
the kvm_emulate_insn event not to fail any more.
before:
kvm_emulate_insn: [FAILED TO PARSE] rip=3238197797 ...
after:
kvm_emulate_insn: 0:c102fa25:89 10 (prot32)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1340757701-10711-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use local variable 'field' to reduce typing. It is needed by later patch
not to exceed 80 column.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1340757701-10711-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When libtraceevent parses format fields, it assumes that array of 1 byte
is string but it's not always true. The kvm_emulate_insn contains 15 u8
array of insn that contains (binary) instructions. Thus when it's
printed, it'll have broken output like below:
kvm_emulate_insn: [FAILED TO PARSE] rip=3238197797 csbase=0 len=2 \
insn=<89>P^]<B4>& flags=5 failed=0
With this patch:
kvm_emulate_insn: [FAILED TO PARSE] rip=3238197797 csbase=0 len=2 \
insn=ARRAY[89, 10, 5d, c3, 8d, b4, 26, 00, 00, 00, 00, 55, 89, e5, 3e] flags=5 failed=0
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1340352615-20737-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo reported that libtraceevent doesn't clean out dependency (.d) files
and it can cause a build error when the libgcc package upgraded:
comet:~/tip/tools/perf> make -j
SUBDIR ../lib/traceevent/
make[1]: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h',
needed by `event-parse.o'. Stop.
make: *** [../lib/traceevent//libtraceevent.a] Error 2
So this patch makes the .d files depends on the source and header files
also, so that it can be re-generated as needed.
NOTE: This code is copied from the GNU make manual page
(4.14 Generating Prerequisites Automatically).
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340343462-15556-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As we use a macro trick to sync each error codes with its description
string, teach [ce]tags to process them properly.
This patch modifies the libtraceevent's Makefile not a kernel one.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-3101nsbg52glxdqih291qj74@git.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1340352615-20737-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dependency files were not cleaned up. Add missing space to fix the issue.
Signed-off-by: Konstantin Stepanyuk <konstantin.stepanyuk@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1340833934-18783-1-git-send-email-konstantin.stepanyuk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
References to OUTPUT should not be followed by a '/'. When a build
output directory is not specified for this case you get:
gcc -o builtin-annotate.o -c ... -I/util ...
which is wrong.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1339463612-30937-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pipeline:
perf record -a -g -o - sleep 5 |perf inject -v -b | perf report -g -i -
generates the warning:
Selected -g but no callchain data. Did you call 'perf record' without -g?
The problem is that the header data is not written to the pipe, so the
sample_type has not been available when perf_report__setup_sample_type
is called. For pipe mode, record dumps the sample type as part of the
synthesized events stream -- perf_event__synthesize_attrs(). Handle this
be detecting pipe mode and not doing early sanity checks on sample_type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1339444121-26236-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current perf-bench documentation has a couple of typos and even
lacks entire description of mem subsystem. Fix it.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340172486-17805-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The .gnu_debuglink section is specified to contain the filename of the
debug info file, as well as a CRC that can be used to validate it.
This doesn't currently use the checksum and relies on the usual build-id
matching for validation.
This provides more context:
http://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html
Signed-off-by: Pierre-Loup A. Griffais <pgriffais@nvidia.com>
Reported-by: Mike Sartain <mikesart@valvesoftware.com>
Tested-by: Mike Sartain <mikesart@valvesoftware.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Sartain <mikesart@valvesoftware.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FE4BB95.3080309@nvidia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pevent thing is per perf.data file, so I made it stop being static
and become a perf_session member, so tools processing perf.data files
use perf_session and _there_ we read the trace events description into
session->pevent and then change everywhere to stop using that single
global pevent variable and use the per session one.
Note that it _doesn't_ fall backs to trace__event_id, as we're not
interested at all in what is present in the
/sys/kernel/debug/tracing/events in the workstation doing the analysis,
just in what is in the perf.data file.
This patch also introduces perf_session__set_tracepoints_handlers that
is the perf perf.data/session way to associate handlers to tracepoint
events by resolving their IDs using the events descriptions stored in a
perf.data file. Make 'perf sched' use it.
Reported-by: Dmitry Antipov <dmitry.antipov@linaro.org>
Tested-by: Dmitry Antipov <dmitry.antipov@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linaro-dev@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/20120625232016.GA28525@infradead.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit changed raw event names to carry event modificator.
perf evsel: Reconstruct raw event with modifiers from perf_event_attr
commit 6eef3d9c2b
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_evsel__name function now returns ':mod' suffix for raw events,
so we need to follow that in current tests.
All tests pass now for 'perf test parse' suite.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340274316-5161-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit c410431cef ("perf tools: Reconstruct event with modifiers
from perf_event_attr") added the line, but it's broken since it needs to
go up 3 directories to get to the kernel root directory, not 2.
However host gcc contains /usr/local/include in its search path, so that
it can find the perf_event.h in /usr/include. This why we didn't notice
the problem yet. But when I tried to cross compile it appears like:
CC util/evsel.o
util/evsel.c:18:44: error: ../../include/linux/perf_event.h: No such file or directory
make: *** [util/evsel.o] Error 1
Looking at the source, it isn't needed at all as evsel.h already
included the perf_event.h. So simply remove it would solve the problem.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340268772-5737-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to get the USB fixes that were merged in the 3.5-rc4 tree into usb-next
so that everyone can sync up properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf updates from Ingo Molnar.
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ftrace: Make all inline tags also include notrace
perf: Use css_tryget() to avoid propping up css refcount
perf tools: Fix synthesizing tracepoint names from the perf.data headers
perf stat: Fix default output file
perf tools: Fix endianity swapping for adds_features bitmask
Pull perf improvements from Arnaldo Carvalho de Melo:
* Replace event_name with perf_evsel__name, that handles the event
modifiers and doesn't use static variables.
* GTK browser improvements, from Namhyung Kim
* Fix possible NULL pointer deref in the TUI annotate browser, from
Samuel Liao
* Add sort by source file:line number, using addr2line.
* Allow printing histogram text snapshots at any point in top/report.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sym may be NULL, and that will cause perf to crash.
Signed-off-by: Shan Wei <davidshan@tencent.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/4FCD95D3.90209@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that __event_name is gone, no need to export __perf_evsel__[hs]w_name().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rpjnarbt83nu9uowrfatmy12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I forgot to add the modifiers to raw events too, fix it.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pi267j1aqqjti9rqh9qy4g58@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not needed anymore, the parsing code can just leave evsel->name as NULL
and the first call to perf_evsel__name() will do exactly what was being
pre-cached using __event_name().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cn2eiijcinnc97buod8cs34m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One needs to use perf_evsel__name() so that if needed the name gets
synthesized and stored in evsel->name, from where perf_evsel__name()
will serve from them on.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ml7zbenjmri9bghmrea0jm0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No logic change, just remove one more user of __event_name().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e4f0vuy3283hmzfjjvkgm7fo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't use global variables that could make us misreport event
names when having a multi window top, for instance.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now to convert all event_name users to perf_evsel__name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-buuz0j0gynseglxa76r01rdn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From perf_evsel__hw_name, so that we can use it for the other kinds of
events (tracepoints, software, hw cache, etc).
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9gmd5wewsrvtny8tzxjfp471@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid having to resort to --stdio, that expands everything, instead
allow the user to go on expanding the relevant callchains and then press
'P' to print that view.
As the hists browser is used for both static (report) and dynamic (top)
views, it prints to a 'perf.hists.N' sequence, i.e. multiple snapshots
can be taken in report and top.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wr9xx4ba0utrynu5j6wotd79@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define and use perf_gtk_eops to provide a GTK2 message dialog for error
reporting and a info_bar for warning.
As GtkInfoBar requires recent GTK+ libraries, provides a fallback
implementation using statusbar widget too.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-8-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The GtkInfoBar is a modern UI component to display messages without
bothering the main window. It'll be used for showing a warning message.
As the GtkInfoBar requires 2.18 (or newer) version of GTK+ library, add
availability check to Makefile too.
Suggested-by: Sunjin Yang <fan4326@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-7-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add statusbar widget to display non-critical messages at the bottom of
the window. This can be used for showing a status change, warning or
help message.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-6-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct perf_gtk_context is for tracking current state of GTK window
and/or other things. This is a preparation of next changes.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-5-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct perf_error_ops is for flexible error logging.
We can register appropriate functions based on front-end.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338265382-6872-4-git-send-email-namhyung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding automated test for parsing terms out of the event grammar.
Also slightly changing current event parsing test functions to
follow up more generic namespace.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-14-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add support to specify alias term within the event description.
The definition of pmu event alias is located at:
${sysfs_mount}/bus/event_source/devices/${pmu}/events/
Each file in the 'events' directory defines a event alias. Its contents
are like:
config=1,config1=2
Using pmu event alias, an event can be now specified like:
uncore/CLOCKTICKS/ or uncore/event=CLOCKTICKS/
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
[ Cleaned it up. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1339741902-8449-13-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to reuse the event grammar for parsing aliased terms.
The obvious reason is we dont need to add new code when there's
already support for this in event grammar.
Doing this by adding terms and event start entries into event
parse grammar. The grammar forks on the begining based on the
starting token, which is supplied via bison interface into the
lexer. The lexer then returns the starting token as the first
token, thus making the grammar switch accordingly.
Currently 2 starting tokens/grammars are supported:
PE_START_TERMS, PE_START_EVENTS
The PE_START_TERMS related grammar uses 'event_config' part
of the grammar for term parsing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-12-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make the event parser reentrant by creating separate
scanner for each parsing. The scanner is passed to the bison
as and argument to the lexer.
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
[ Cleaned up the patch. ]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-11-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Moving all the bison arguments into the structure. In upcomming
patches we are going to:
- add more arguments
- reuse the grammer for term parsing
so it's more clear to pack/separate related arguments.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1339741902-8449-10-git-send-email-zheng.z.yan@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The testusb.c tool has support for looping forever implemented, which
may be useful for stress test, yet it is not exposed to the user, so
even though the code is there, it cannot be used. This commit adds
"l" to the set of options handled by the application which enables
the feature.
Also, I collate help information for each command line option to make
it easier to use for novice.
Signed-off-by: Du Changbin <changbinx.du@intel.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to use the per event info snapshoted at record time to
synthesize the events name, so do it just after reading the perf.data
headers, when we already processed the /sys events data, otherwise we'll
end up using the local /sys that only by sheer luck will have the same
tracepoint ID -> real event association.
Example:
# uname -a
Linux felicio.ghostprotocols.net 3.4.0-rc5+ #1 SMP Sat May 19 15:27:11 BRT 2012 x86_64 x86_64 x86_64 GNU/Linux
# perf record -e sched:sched_switch usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data (~648 samples) ]
# cat /t/events/sched/sched_switch/id
279
# perf evlist -v
sched:sched_switch: sample_freq=1, type: 2, config: 279, size: 80, sample_type: 1159, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1
#
So on the above machine the sched:sched_switch has tracepoint id 279, but on
the machine were we'll analyse it it has a different id:
$ cat /t/events/sched/sched_switch/id
56
$ perf evlist -i /tmp/perf.data
kmem:mm_balancedirty_writeout
$ cat /t/events/kmem/mm_balancedirty_writeout/id
279
With this fix:
$ perf evlist -i /tmp/perf.data
sched:sched_switch
Reported-by: Dmitry Antipov <dmitry.antipov@linaro.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-auwks8fpuhmrdpiefs55o5oz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following commit:
commit 56f3bae706
Author: Jim Cromie <jim.cromie@gmail.com>
Date: Wed Sep 7 17:14:00 2011 -0600
perf stat: Add --log-fd <N> option to redirect stderr elsewhere
introduced a bug in the way perf stat outputs the results by default,
i.e., without the --log-fd or --output option. It would default to
writing to file descriptor 0, i.e., stdin. Writing to stdin is allowed
and is equivalent to writing to stdout. However, there is a major
difference for any script that was already capturing the output of perf
stat via redirection:
perf stat >/tmp/log .... or perf stat 2>/tmp/log ....
They would not capture anything anymore. They would have to do:
perf stat 0>/tmp/log ...
This breaks compatibility with existing scripts and does not look very
natural.
This patch fixes the problem by looking at output_fd only when it was
modified by user (> 0). It also checks that the value if positive.
Passing --log-fd 0 is ignored.
I would also argue that defaulting to stderr for the results is not the
right thing to do, though this patch does not address this specific
issue.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jim Cromie <jim.cromie@gmail.com>
Link: http://lkml.kernel.org/r/20120515111111.GA9870@quad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Based on Jiri's latest attempt:
https://lkml.org/lkml/2012/5/16/61
Basically, adds_features should be byte swapped assuming unsigned
longs are either 8-bytes (u64) or 4-bytes (u32).
Fixes 32-bit ppc dumping 64-bit x86 feature data:
========
captured on: Sun May 20 19:23:23 2012
hostname : nxos-vdc-dev3
os release : 3.4.0-rc7+
perf version : 3.4.rc4.137.g978da3
arch : x86_64
nrcpus online : 16
nrcpus avail : 16
cpudesc : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz
cpuid : GenuineIntel,6,26,5
total memory : 24680324 kB
...
Verified 64-bit x86 can still dump feature data for 32-bit ppc.
Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4FBBB539.5010805@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The SuSE security team suggested to use recvfrom instead of recv to be
certain that the connector message is originated from kernel.
CVE-2012-2669
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Marcus Meissner <meissner@suse.de>
Signed-off-by: Sebastian Krahmer <krahmer@suse.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull perf fixes from Ingo Molnar:
"A bit larger than what I'd wish for - half of it is due to hw driver
updates to Intel Ivy-Bridge which info got recently released,
cycles:pp should work there now too, amongst other things. (but we
are generally making exceptions for hardware enablement of this type.)
There are also callchain fixes in it - responding to mostly
theoretical (but valid) concerns. The tooling side sports perf.data
endianness/portability fixes which did not make it for the merge
window - and various other fixes as well."
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
perf/x86: Check user address explicitly in copy_from_user_nmi()
perf/x86: Check if user fp is valid
perf: Limit callchains to 127
perf/x86: Allow multiple stacks
perf/x86: Update SNB PEBS constraints
perf/x86: Enable/Add IvyBridge hardware support
perf/x86: Implement cycles:p for SNB/IVB
perf/x86: Fix Intel shared extra MSR allocation
x86/decoder: Fix bsr/bsf/jmpe decoding with operand-size prefix
perf: Remove duplicate invocation on perf_event_for_each
perf uprobes: Remove unnecessary check before strlist__delete
perf symbols: Check for valid dso before creating map
perf evsel: Fix 32 bit values endianity swap for sample_id_all header
perf session: Handle endianity swap on sample_id_all header data
perf symbols: Handle different endians properly during symbol load
perf evlist: Pass third argument to ioctl explicitly
perf tools: Update ioctl documentation for PERF_IOC_FLAG_GROUP
perf tools: Make --version show kernel version instead of pull req tag
perf tools: Check if callchain is corrupted
perf callchain: Make callchain cursors TLS
...
Pull perf fixes from Arnaldo Carvalho de Melo:
* Endianness fixes from Jiri Olsa
* Fixes for make perf tarball
* Fix for DSO name in perf script callchains, from David Ahern
* Segfault fixes for perf top --callchain, from Namhyung Kim
* Minor function result fixes from Srikar Dronamraju
* Add missing 3rd ioctl parameter, from Namhyung Kim
* Fix pager usage in minimal embedded systems, from Avik Sil
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Initial IVB support went into turbostat in Linux-3.1:
553575f1ae
(tools turbostat: recognize and run properly on IVB)
However, when running on IVB, turbostat would fail
to report the new couters added with SNB, c7, pc2 and pc7.
So in scenarios where these counters are non-zero on IVB,
turbostat would report erroneous residencey results.
In particular c7 time would be added to c1 time,
since c1 time is calculated as "that which is left over".
Also, turbostat reports MHz capabilities when passed
the "-v" option, and it would incorrectly report 133MHz
bclk instead of 100MHz bclk for IVB, which would inflate
GHz reported with that option.
This patch is a backport of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Linux 3.4 included a modification to turbostat to
lower cross-call overhead by using scheduler affinity:
15aaa34654
(tools turbostat: reduce measurement overhead due to IPIs)
In the use-case where turbostat forks a child program,
that change had the un-intended side-effect of binding
the child to the last cpu in the system.
This change removed the binding before forking the child.
This is a back-port of a fix already included in turbostat v2.
Signed-off-by: Len Brown <len.brown@intel.com>
Merge misc patches from Andrew Morton:
- the "misc" tree - stuff from all over the map
- checkpatch updates
- fatfs
- kmod changes
- procfs
- cpumask
- UML
- kexec
- mqueue
- rapidio
- pidns
- some checkpoint-restore feature work. Reluctantly. Most of it
delayed a release. I'm still rather worried that we don't have a
clear roadmap to completion for this work.
* emailed from Andrew Morton <akpm@linux-foundation.org>: (78 patches)
kconfig: update compression algorithm info
c/r: prctl: add ability to set new mm_struct::exe_file
c/r: prctl: extend PR_SET_MM to set up more mm_struct entries
c/r: procfs: add arg_start/end, env_start/end and exit_code members to /proc/$pid/stat
syscalls, x86: add __NR_kcmp syscall
fs, proc: introduce /proc/<pid>/task/<tid>/children entry
sysctl: make kernel.ns_last_pid control dependent on CHECKPOINT_RESTORE
aio/vfs: cleanup of rw_copy_check_uvector() and compat_rw_copy_check_uvector()
eventfd: change int to __u64 in eventfd_signal()
fs/nls: add Apple NLS
pidns: make killed children autoreap
pidns: use task_active_pid_ns in do_notify_parent
rapidio/tsi721: add DMA engine support
rapidio: add DMA engine support for RIO data transfers
ipc/mqueue: add rbtree node caching support
tools/selftests: add mq_perf_tests
ipc/mqueue: strengthen checks on mqueue creation
ipc/mqueue: correct mq_attr_ok test
ipc/mqueue: improve performance of send/recv
selftests: add mq_open_tests
...
David Ahern
Steven Rostedt
Len Brown
Ingo Molnar
Greg Kroah-Hartman
Arnaldo Carvalho de Melo
Jiri Olsa
Namhyung Kim
Peter Huewe
Wolfgang Mauerer
majianpeng
Hitoshi Mitake
Robert Richter
Konstantin Stepanyuk
Pierre-Loup A. Griffais
Linus Torvalds
Samuel Liao
Namhyung Kim
Zheng Yan
Du, ChangbinX
Stephane Eranian
Olaf Hering