Pull networking updates from David Miller:
"Another merge window, another pull full of stuff:
1) Support alternative names for network devices, from Jiri Pirko.
2) Introduce per-netns netdev notifiers, also from Jiri Pirko.
3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
Larsen.
4) Allow compiling out the TLS TOE code, from Jakub Kicinski.
5) Add several new tracepoints to the kTLS code, also from Jakub.
6) Support set channels ethtool callback in ena driver, from Sameeh
Jubran.
7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.
8) Add XDP support to mvneta driver, from Lorenzo Bianconi.
9) Lots of netfilter hw offload fixes, cleanups and enhancements,
from Pablo Neira Ayuso.
10) PTP support for aquantia chips, from Egor Pomozov.
11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
Josh Hunt.
12) Add smart nagle to tipc, from Jon Maloy.
13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
Duvvuru.
14) Add a flow mask cache to OVS, from Tonghao Zhang.
15) Add XDP support to ice driver, from Maciej Fijalkowski.
16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.
17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.
18) Support it in stmmac driver too, from Jose Abreu.
19) Support TIPC encryption and auth, from Tuong Lien.
20) Introduce BPF trampolines, from Alexei Starovoitov.
21) Make page_pool API more numa friendly, from Saeed Mahameed.
22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.
23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
libbpf: Fix usage of u32 in userspace code
mm: Implement no-MMU variant of vmalloc_user_node_flags
slip: Fix use-after-free Read in slip_open
net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
macvlan: schedule bc_work even if error
enetc: add support Credit Based Shaper(CBS) for hardware offload
net: phy: add helpers phy_(un)lock_mdio_bus
mdio_bus: don't use managed reset-controller
ax88179_178a: add ethtool_op_get_ts_info()
mlxsw: spectrum_router: Fix use of uninitialized adjacency index
mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
bpf: Simplify __bpf_arch_text_poke poke type handling
bpf: Introduce BPF_TRACE_x helper for the tracing tests
bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
bpf, testing: Add various tail call test cases
bpf, x86: Emit patchable direct jump as tail call
bpf: Constant map key tracking for prog array pokes
bpf: Add poke dependency tracking for prog array maps
bpf: Add initial poke descriptor table for jit images
bpf: Move owner type, jited info into array auxiliary data
...
-----BEGIN PGP SIGNATURE-----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=QCEy
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow to print symbolic error names via new %pe modifier.
- Use pr_warn() instead of the remaining pr_warning() calls. Fix
formatting of the related lines.
- Add VSPRINTF entry to MAINTAINERS.
* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
checkpatch: don't warn about new vsprintf pointer extension '%pe'
MAINTAINERS: Add VSPRINTF
tools lib api: Renaming pr_warning to pr_warn
ASoC: samsung: Use pr_warn instead of pr_warning
lib: cpu_rmap: Use pr_warn instead of pr_warning
trace: Use pr_warn instead of pr_warning
dma-debug: Use pr_warn instead of pr_warning
vgacon: Use pr_warn instead of pr_warning
fs: afs: Use pr_warn instead of pr_warning
sh/intc: Use pr_warn instead of pr_warning
scsi: Use pr_warn instead of pr_warning
platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
platform/x86: asus-laptop: Use pr_warn instead of pr_warning
platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
oprofile: Use pr_warn instead of pr_warning
of: Use pr_warn instead of pr_warning
macintosh: Use pr_warn instead of pr_warning
idsn: Use pr_warn instead of pr_warning
ide: Use pr_warn instead of pr_warning
crypto: n2: Use pr_warn instead of pr_warning
...
- Handle CC variables containing quotes in tools-support-relr.sh script
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl3OiRAACgkQt6xw3ITB
YzQMhwgAgZl+QQPLhEMLQHvqaDtLb3l08vPPrLCDWHon5IaHMz1HCGB+/5CMaCG5
9X9tEiy2xg5X9aHSyI7T7qmjqUGkXTKn1OzeSNxHJh8IUsvFN30UKm2lEewoRq1V
WR8HfC/h1Ff+b2502/gg96KZxWBnzbN2XmZ3cEtLCHsj8OrRq6mFeqMxgnD8xE3D
DceJ3v48ziYV2LUOM8/ZLJ8CzwWcSiNYIqJghjgbC2q83+czxne6KRGwx/4muWaX
OpMa5tvbeVirMOThr3BGpuDe/JTkygVXFfw7jS/mNbV6ALwf9E8neinnoTFNp7Tq
7tpBkRHxB3vB6tLnnBJIjNfl1KbaJA==
=YqcT
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"One trivial fix for -rc8/final that ensures that the script used to
detect RELR relocation support in the toolchain works correctly when
$CC contains quotes. Although it fails safely (by failing to detect
the support when it exists), it would be nice to have this fixed in
5.4 given that it was only introduced in the last merge window.
Summary:
- Handle CC variables containing quotes in tools-support-relr.sh
script"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
scripts/tools-support-relr.sh: un-quote variables
This extension was introduced in commit 57f5677e53 ("printf: add
support for printing symbolic error names").
Link: http://lkml.kernel.org/r/20191114100416.23928-1-u.kleine-koenig@pengutronix.de
To: Andy Whitcroft <apw@canonical.com>
To: Joe Perches <joe@perches.com>
To: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
[pmladek@suse.com: Switched the ordering: eE -> Ee]
Signed-off-by: Petr Mladek <pmladek@suse.com>
When the CC variable contains quotes, e.g. when using
ccache (make CC="ccache <compiler>"), this script always
fails, so CONFIG_RELR is never enabled, even when the
toolchain supports this feature. Removing the /dev/null
redirect and invoking the script manually shows the issue:
$ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh
./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found
Fix this by un-quoting the variables.
Before:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_ARCH_HAS_RELR=y
With this change:
$ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \
NM=llvm-nm OBJCOPY=llvm-objcopy defconfig
$ grep RELR .config
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_ARCH_HAS_RELR=y
CONFIG_RELR=y
Fixes: 5cf896fb6b ("arm64: Add support for relocating the kernel with RELR relocations")
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/769
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix `make nsdeps` for modules composed of multiple source files. Since
$mod_source_files is not in quotes in the call to generate_deps_for_ns(), not
all the source files for a module were being passed to spatch.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9XXQ
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix `make nsdeps` for modules composed of multiple source files.
Since $mod_source_files was not in quotes in the call to
generate_deps_for_ns(), not all the source files for a module were
being passed to spatch"
* tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: make sure to pass all module source files to spatch
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The nsdeps script passes a list of the module source files to
generate_deps_for_ns() as a space delimited string named $mod_source_files,
which then passes it to spatch. But since $mod_source_files is not encased
in quotes, each source file in that string is treated as a separate shell
function argument (as $2, $3, $4, etc.). However, the spatch invocation
only refers to $2, so only the first file out of $mod_source_files is
processed by spatch.
This causes problems (namely, the MODULE_IMPORT_NS() statement doesn't
get inserted) when a module is composed of many source files and the
"main" module file containing the MODULE_LICENSE() statement is not the
first file listed in $mod_source_files. Fix this by encasing
$mod_source_files in quotes so that the entirety of the string is
treated as a single argument and can be referred to as $2.
In addition, put quotes in the variable assignment of mod_source_files
to prevent any shell interpretation and field splitting.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-10-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 52 non-merge commits during the last 11 day(s) which contain
a total of 65 files changed, 2604 insertions(+), 1100 deletions(-).
The main changes are:
1) Revolutionize BPF tracing by using in-kernel BTF to type check BPF
assembly code. The work here teaches BPF verifier to recognize
kfree_skb()'s first argument as 'struct sk_buff *' in tracepoints
such that verifier allows direct use of bpf_skb_event_output() helper
used in tc BPF et al (w/o probing memory access) that dumps skb data
into perf ring buffer. Also add direct loads to probe memory in order
to speed up/replace bpf_probe_read() calls, from Alexei Starovoitov.
2) Big batch of changes to improve libbpf and BPF kselftests. Besides
others: generalization of libbpf's CO-RE relocation support to now
also include field existence relocations, revamp the BPF kselftest
Makefile to add test runner concept allowing to exercise various
ways to build BPF programs, and teach bpf_object__open() and friends
to automatically derive BPF program type/expected attach type from
section names to ease their use, from Andrii Nakryiko.
3) Fix deadlock in stackmap's build-id lookup on rq_lock(), from Song Liu.
4) Allow to read BTF as raw data from bpftool. Most notable use case
is to dump /sys/kernel/btf/vmlinux through this, from Jiri Olsa.
5) Use bpf_redirect_map() helper in libbpf's AF_XDP helper prog which
manages to improve "rx_drop" performance by ~4%., from Björn Töpel.
6) Fix to restore the flow dissector after reattach BPF test and also
fix error handling in bpf_helper_defs.h generation, from Jakub Sitnicki.
7) Improve verifier's BTF ctx access for use outside of raw_tp, from
Martin KaFai Lau.
8) Improve documentation for AF_XDP with new sections and to reflect
latest features, from Magnus Karlsson.
9) Add back 'version' section parsing to libbpf for old kernels, from
John Fastabend.
10) Fix strncat bounds error in libbpf's libbpf_prog_type_by_name(),
from KP Singh.
11) Turn on -mattr=+alu32 in LLVM by default for BPF kselftests in order
to improve insn coverage for built BPF progs, from Yonghong Song.
12) Misc minor cleanups and fixes, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod. Instead,
have modpost extract a symbol's namespace from __kstrtabns and
__ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by
unescaped '/'. Use a different sed delimiter to avoid this problem.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ge3Z
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod.
Instead, have modpost extract a symbol's namespace from __kstrtabns
and __ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused
by unescaped '/'.
Use a different sed delimiter to avoid this problem.
* tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: use alternative sed delimiter
symbol namespaces: revert to previous __ksymtab name scheme
modpost: make updating the symbol namespace explicit
modpost: delegate updating namespaces to separate function
When doing an out of tree build with O=, the nsdeps script constructs
the absolute pathname of the module source file so that it can insert
MODULE_IMPORT_NS statements in the right place. However, ${srctree}
contains an unescaped path to the source tree, which, when used in a sed
substitution, makes sed complain:
++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g'
sed: -e expression #1, char 12: unknown option to `s'
The sed substitution command 's' ends prematurely with the forward
slashes in the pathname, and sed errors out when it encounters the 'h',
which is an invalid sed substitution option. To avoid escaping forward
slashes ${srctree}, we can use '|' as an alternative delimiter for
sed instead to avoid this error.
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Tested-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Don't generate a broken bpf_helper_defs.h header if the helper script needs
updating because it doesn't recognize a newly added type. Instead print an
error that explains why the build is failing, clean up the partially
generated header and stop.
v1->v2:
- Switched from temporary file to .DELETE_ON_ERROR.
Fixes: 456a513bb5 ("scripts/bpf: Emit an #error directive known types list needs updating")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191020112344.19395-1-jakub@cloudflare.com
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
-----BEGIN PGP SIGNATURE-----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=KNWF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild fixes from Masahiro Yamada:
- fix a bashism of setlocalversion
- do not use the too new --sort option of tar
* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kheaders: substituting --sort in archive creation
scripts: setlocalversion: fix a bashism
kbuild: update comment about KBUILD_ALLDIRS
Currently lx-symbols assumes that module text is always located at
module->core_layout->base, but s390 uses the following layout:
+------+ <- module->core_layout->base
| GOT |
+------+ <- module->core_layout->base + module->arch->plt_offset
| PLT |
+------+ <- module->core_layout->base + module->arch->plt_offset +
| TEXT | module->arch->plt_size
+------+
Therefore, when trying to debug modules on s390, all the symbol
addresses are skewed by plt_offset + plt_size.
Fix by adding plt_offset + plt_size to module_addr in
load_module_symbols().
Link: http://lkml.kernel.org/r/20191017085917.81791-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id. This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.
This fixes following error:
(gdb) lx-dmesg
Python Exception <class 'ValueError'> embedded null character:
Error occurred in Python command: embedded null character
The read_u* utility functions now take an offset argument to make them
easier to use.
Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The introduction of Symbol Namespaces changed the naming schema of the
__ksymtab entries from __kysmtab__symbol to __ksymtab_NAMESPACE.symbol.
That caused some breakages in tools that depend on the name layout in
either the binaries(vmlinux,*.ko) or in System.map. E.g. kmod's depmod
would not be able to read System.map without a patch to support symbol
namespaces. A warning reported by depmod for namespaced symbols would
look like
depmod: WARNING: [...]/uas.ko needs unknown symbol usb_stor_adjust_quirks
In order to address this issue, revert to the original naming scheme and
rather read the __kstrtabns_<symbol> entries and their corresponding
values from __ksymtab_strings to update the namespace values for
symbols. After having read all symbols and handled them in
handle_modversions(), the symbols are created. In a second pass, read
the __kstrtabns_ entries and update the namespaces accordingly.
Fixes: 8651ec01da ("module: add support for symbol namespaces.")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Setting the symbol namespace of a symbol within sym_add_exported feels
displaced and lead to issues in the current implementation of symbol
namespaces. This patch makes updating the namespace an explicit call to
decouple it from adding a symbol to the export list.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Let the function 'sym_update_namespace' take care of updating the
namespace for a symbol. While this currently only replaces one single
location where namespaces are updated, in a following patch, this
function will get more call sites.
The function signature is intentionally close to sym_update_crc and
taking the name by char* seems like unnecessary work as the symbol has
to be looked up again. In a later patch of this series, this concern
will be addressed.
This function ensures that symbol::namespace is either NULL or has a
valid non-empty value. Previously, the empty string was considered 'no
namespace' as well and this lead to confusion.
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
While it is useful for new drivers to use devm_platform_ioremap_resource,
this script is currently used to spam maintainers, often updating very
old drivers. The net benefit is the removal of 2 lines of code in the
driver but the review load for the maintainers is huge. As of now, more
that 560 patches have been sent, some of them obviously broken, as in:
https://lore.kernel.org/lkml/9bbcce19c777583815c92ce3c2ff2586@www.loen.fr/
Remove the script to reduce the spam.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the compiler report a clear error when bpf_helpers_doc.py needs
updating rather than rely on the fact that Clang fails to compile
English:
../../../lib/bpf/bpf_helper_defs.h:2707:1: error: unknown type name 'Unrecognized'
Unrecognized type 'struct bpf_inet_lookup', please add it to known types!
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191016085811.11700-1-jakub@cloudflare.com
Fix bashism reported by checkbashisms by using only one '=':
possible bashism in scripts/setlocalversion line 96 (should be 'b = a'):
if [ "`hg log -r . --template '{latesttagdistance}'`" == "1" ]; then
Fixes: 38b3439d84 ("setlocalversion: update mercurial tag parsing")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Mike Crowe <mcrowe@zipitwireless.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-10-14
The following pull-request contains BPF updates for your *net-next* tree.
12 days of development and
85 files changed, 1889 insertions(+), 1020 deletions(-)
The main changes are:
1) auto-generation of bpf_helper_defs.h, from Andrii.
2) split of bpf_helpers.h into bpf_{helpers, helper_defs, endian, tracing}.h
and move into libbpf, from Andrii.
3) Track contents of read-only maps as scalars in the verifier, from Andrii.
4) small x86 JIT optimization, from Daniel.
5) cross compilation support, from Ivan.
6) bpf flow_dissector enhancements, from Jakub and Stanislav.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Removed locked down from tracefs itself and moved it to the trace
directory. Having the open functions there do the lockdown checks.
- Fixed a few races with opening an instance file and the instance being
deleted (Discovered during the locked down updates). Kept separate
from the clean up code such that they can be backported to stable
easier.
- Cleaned up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fixed a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXaNhphQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quDIAP4v08ARNdIh+r+c4AOBm3xsOuE/d9GB
I56ydnskm+x2JQD6Ap9ivXe9yDBIErFeHNtCoq7pM8YDI4YoYIB30N0GfwM=
=7oAu
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"A few tracing fixes:
- Remove lockdown from tracefs itself and moved it to the trace
directory. Have the open functions there do the lockdown checks.
- Fix a few races with opening an instance file and the instance
being deleted (Discovered during the lockdown updates). Kept
separate from the clean up code such that they can be backported to
stable easier.
- Clean up and consolidated the checks done when opening a trace
file, as there were multiple checks that need to be done, and it
did not make sense having them done in each open instance.
- Fix a regression in the record mcount code.
- Small hw_lat detector tracer fixes.
- A trace_pipe read fix due to not initializing trace_seq"
* tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Initialize iter->seq after zeroing in tracing_read_pipe()
tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency
tracing/hwlat: Report total time spent in all NMIs during the sample
recordmcount: Fix nop_mcount() function
tracing: Do not create tracefs files if tracefs lockdown is in effect
tracing: Add locked_down checks to the open calls of files created for tracefs
tracing: Add tracing_check_open_get_tr()
tracing: Have trace events system open call tracing_open_generic_tr()
tracing: Get trace_array reference for available_tracers files
ftrace: Get a reference counter for the trace_array on filter files
tracefs: Revert ccbd54ff54 ("tracefs: Restrict tracefs when the kernel is locked down")
The removal of the longjmp code in recordmcount.c mistakenly made the return
of make_nop() being negative an exit of nop_mcount(). It should not exit the
routine, but instead just not process that part of the code. By exiting with
an error code, it would cause the update of recordmcount to fail some files
which would fail the build if ftrace function tracing was enabled.
Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.home
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: 3f1df12019 ("recordmcount: Rewrite error/success handling")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
- Fix broken external module builds due to a modpost bug in read_dump(),
where the namespace was not being strdup'd and sym->namespace would be
set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ebck
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
scripts/nsdeps automatically generates a patch to add MODULE_IMPORT_NS
tags, and what is nicer, it sorts the lines alphabetically with the
'sort' command. However, the output from the 'sort' command depends on
locale.
For example, I got this:
$ { echo usbstorage; echo usb_storage; } | LANG=en_US.UTF-8 sort
usbstorage
usb_storage
$ { echo usbstorage; echo usb_storage; } | LANG=C sort
usb_storage
usbstorage
So, this means people might potentially send different patches.
This kind of issue was reported in the past, for example,
commit f55f2328bb ("kbuild: make sorting initramfs contents
independent of locale").
Adding 'LANG=C' is a conventional way of fixing when a deterministic
result is desirable.
I added 'LANG=C' very close to the 'sort' command since changing
locale affects the language of error messages etc. We should respect
users' choice as much as possible.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
This script does not use bash-extension. I am guessing this hashbang
was copied from scripts/coccicheck, which really uses bash-extension.
/bin/sh is enough for this script.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Currently, external module builds produce tons of false-positives:
WARNING: module <mod> uses symbol <sym> from namespace <ns>, but does not import it.
Here, the <ns> part shows a random string.
When you build external modules, the symbol info of vmlinux and
in-kernel modules are read from $(objtree)/Module.symvers, but
read_dump() is buggy in multiple ways:
[1] When the modpost is run for vmlinux and in-kernel modules,
sym_extract_namespace() allocates memory for the namespace. On the
other hand, read_dump() does not, then sym->namespace will point to
somewhere in the line buffer of get_next_line(). The data in the
buffer will be replaced soon, and sym->namespace will end up with
pointing to unrelated data. As a result, check_exports() will show
random strings in the warning messages.
[2] When there is no namespace, sym_extract_namespace() returns NULL.
On the other hand, read_dump() sets namespace to an empty string "".
(but, it will be later replaced with unrelated data due to bug [1].)
The check_exports() shows a warning unless exp->namespace is NULL,
so every symbol read from read_dump() emits the warning, which is
mostly false positive.
To address [1], sym_add_exported() calls strdup() for s->namespace.
The namespace from sym_extract_namespace() must be freed to avoid
memory leak.
For [2], I changed the if-conditional in check_exports().
This commit also fixes sym_add_exported() to set s->namespace correctly
when the symbol is preloaded.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Currently, EXPORT_SYMBOL_NS(_GPL) constructs the kernel symbol as
follows:
__ksymtab_SYMBOL.NAMESPACE
The sym_extract_namespace() in modpost allocates memory for the part
SYMBOL.NAMESPACE when '.' is contained. One problem is that the pointer
returned by strdup() is lost because the symbol name will be copied to
malloc'ed memory by alloc_symbol(). No one will keep track of the
pointer of strdup'ed memory.
sym->namespace still points to the NAMESPACE part. So, you can free it
with complicated code like this:
free(sym->namespace - strlen(sym->name) - 1);
It complicates memory free.
To fix it elegantly, I swapped the order of the symbol and the
namespace as follows:
__ksymtab_NAMESPACE.SYMBOL
then, simplified sym_extract_namespace() so that it allocates memory
only for the NAMESPACE part.
I prefer this order because it is intuitive and also matches to major
languages. For example, NAMESPACE::NAME in C++, MODULE.NAME in Python.
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Now all scripts in scripts/coccinelle to be automatically called
by coccicheck. However new adding add_namespace.cocci does not
support report mode, which make coccicheck failed.
This add "virtual report" to make the coccicheck go ahead smoothly.
Fixes: eb8305aecb ("scripts: Coccinelle script for namespace dependencies.")
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Matthias Maennich <maennich@google.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Enhance scripts/bpf_helpers_doc.py to emit C header with BPF helper
definitions (to be included from libbpf's bpf_helpers.h).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Geert Uytterhoeven reports a strange side-effect of commit 858805b336
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.
[Steps to Reproduce]
$ echo bar > localversion
$ mkdir build
$ cd build/
$ echo foo > localversion
$ make -s -f ../Makefile defconfig include/config/kernel.release
$ cat include/config/kernel.release
5.4.0-rc1foofoobar
This comes down to the behavior change of local variables.
The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
When a variable is made local, it inherits the initial value and
exported and readonly flags from the variable with the same name
in the surrounding scope, if there is one. Otherwise, the variable
is initially unset.
[Test Code]
foo ()
{
local res
echo "res: $res"
}
res=1
foo
[Result]
$ sh test.sh
res: 1
$ bash test.sh
res:
So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.
Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.
Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).
Fixes: 858805b336 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.
Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.
This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.
This behavior was changed in 7e1c04779e ("kbuild: Use relative path
for $(objtree)", 2014-05-14)
Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.
Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.
The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.
rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.
Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Johannes Berg reports lots of modpost warnings on ARCH=um builds:
WARNING: "rename" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "lseek" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "ftruncate64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "getuid" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "lseek64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "unlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "pwrite64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "close" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "opendir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "pread64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "syscall" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readdir64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "futimes" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__lxstat" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "write" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "closedir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__xstat" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fsync" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__lxstat64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__fxstat64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "telldir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "printf" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "readlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__sprintf_chk" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "link" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "rmdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fdatasync" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "truncate" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "statfs" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__errno_location" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__xmknod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "open64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "truncate64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "open" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "read" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "chown" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "chmod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "utime" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fchmod" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "seekdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "ioctl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "dup2" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "statfs64" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "utimes" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "mkdir" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "fchown" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__guard" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "symlink" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "access" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "__stack_smash_handler" [vmlinux] is a static EXPORT_SYMBOL
When you run "make", the modpost is run twice; before linking vmlinux,
and before building modules. All the warnings above are from the second
modpost.
The offending symbols are defined not in vmlinux, but in the C library.
The first modpost is run against the relocatable vmlinux.o, and those
warnings are nicely suppressed because the SH_UNDEF entries from the
symbol table clear the ->is_static flag.
The second modpost is run against the executable vmlinux (+ modules),
where those symbols have been resolved, but the definitions do not
exist.
This commit fixes it in a straightforward way; suppress the static
EXPORT_SYMBOL warnings from "vmlinux".
Without this commit, we see valid warnings twice anyway. For example,
ARCH=arm64 defconfig shows the following warning twice:
WARNING: "HYPERVISOR_platform_op" [vmlinux] is a static EXPORT_SYMBOL_GPL
So, it is reasonable to suppress the second one.
Fixes: 15bfc2348d ("modpost: check for static EXPORT_SYMBOL* functions")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Denis Efremov <efremov@linux.com>
Commit 40df759e2b ("kbuild: Fix build with binutils <= 2.19")
introduced ar-option and KBUILD_ARFLAGS to deal with old binutils.
According to Documentation/process/changes.rst, the current minimal
supported version of binutils is 2.21 so you can assume the 'D' option
is always supported. Not only GNU ar but also llvm-ar supports it.
With the 'D' option hard-coded, there is no more user of ar-option
or KBUILD_ARFLAGS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
IS_ERR(), IS_ERR_OR_NULL(), IS_ERR_VALUE() and WARN*() already contain
unlikely() optimization internally. Thus, there is no point in calling
these functions and defines under likely()/unlikely().
This check is based on the coccinelle rule developed by Enrico Weigelt
https://lore.kernel.org/lkml/1559767582-11081-1-git-send-email-info@metux.net/
Link: http://lkml.kernel.org/r/20190829165025.15750-1-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
Cc: Joe Perches <joe@perches.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denis Efremov <efremov@linux.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some systems (like Chrome OS) may use "split debug" for kernel modules.
That means that the debug symbols are in a different file than the main
elf file. Let's handle that by also searching for debug symbols that end
in ".ko.debug".
This is a packaging topic. You can take a normal elf file and split the
debug out of it using objcopy. Try "man objcopy" and then take a look at
the "--only-keep-debug" option. It'll give you a whole recipe for doing
splitdebug. The suffix used for the debug symbols is arbitrary. If
people have other another suffix besides ".ko.debug" then we could
presumably support that too...
For portage (which is the packaging system used by Chrome OS) split debug
is supported by default (and the suffix is .ko.debug). ...and so in
Chrome OS we always get the installed elf files stripped and then the
symbols stashed away.
At the moment we don't actually use the normal portage magic to do this
for the kernel though since it affects our ability to get good stack dumps
in the kernel. We instead pass a script as "strip" [1].
[1] https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/refs/heads/master/eclass/cros-kernel/strip_splitdebug
Link: http://lkml.kernel.org/r/20190730234052.148744-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
git output parsing depends on the language being en_US english.
Make the backtick execution of all `git <foo>` commands set the
LANGUAGE of the process to en_US.utf8 before executing the actual
command using `export LANGUAGE=en_US.utf8; git <foo>`.
Because the command is executed in a child process, the parent
LANGUAGE is unchanged.
Link: http://lkml.kernel.org/r/bb9f29988f3258281956680ff39c3e19e37dc0b8.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Tested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Git dropped the period from its "ambiguous SHA1" error message in commit
0c99171ad2 ("get_short_sha1: mark ambiguity error for translation"), circa
2016. Drop the period from checkpatch's associated query so as to match
both the old and new error messages.
Link: http://lkml.kernel.org/r/20190830163103.15914-1-sean.j.christopherson@intel.com
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch allows consecutive open braces, so it should also allow
consecutive close braces.
Link: http://lkml.kernel.org/r/bfdb49ae2c3fa7b52fa168769e38b48f959880e2.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add another test for __attribute__((section("foo"))) uses that should be
__section(foo)
Link: http://lkml.kernel.org/r/2f374c3c27054b7f978115270d587c624d9962fc.camel@perches.com
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The arguments of sizeof are not evaluated so arguments are safe to re-use
in that context. Excluding sizeof subexpressions means macros like
ARRAY_SIZE can pass checkpatch.
Link: http://lkml.kernel.org/r/20190806070833.24423-1-brendan.jackman@bluwireless.co.uk
Signed-off-by: Brendan Jackman <brendan.jackman@bluwireless.co.uk>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It can happen that a commit message refers to an invalid commit id,
because the referenced hash changed following a rebase, or simply by
mistake. Add a check in checkpatch.pl which checks that an hash
referenced by a Fixes tag, or just cited in the commit message, is a valid
commit id.
$ scripts/checkpatch.pl <<'EOF'
Subject: [PATCH] test commit
Sample test commit to test checkpatch.pl
Commit 1da177e4c3 ("Linux-2.6.12-rc2") really exists,
commit 0bba044c4c ("tree") is valid but not a commit,
while commit b4cc0b1c0cca ("unknown") is invalid.
Fixes: f0cacc14cade ("unknown")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
EOF
WARNING: Unknown commit id '0bba044c4ce7', maybe rebased or not pulled?
#8:
commit 0bba044c4c ("tree") is valid but not a commit,
WARNING: Unknown commit id 'b4cc0b1c0cca', maybe rebased or not pulled?
#9:
while commit b4cc0b1c0cca ("unknown") is invalid.
WARNING: Unknown commit id 'f0cacc14cade', maybe rebased or not pulled?
#11:
Fixes: f0cacc14cade ("unknown")
total: 0 errors, 3 warnings, 4 lines checked
Link: http://lkml.kernel.org/r/20190711001640.13398-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds
David S. Miller
Uwe Kleine-König
Ilie Halip
Ilya Leoshkevich
Jessica Yu
Jakub Sitnicki
Joel Colledge
Matthias Maennich
Alexandre Belloni
Randy Dunlap
Steven Rostedt (VMware)
Andrii Nakryiko
Masahiro Yamada
YueHaibing
Jacob Keller
Denis Efremov
Douglas Anderson
Joe Perches
Sean Christopherson
Brendan Jackman
Matteo Croce