commit da53c36ddd upstream.
A potential deadlock was found by Zheng Zhang with a local syzkaller
instance.
The problem is that when a non-blocking CEC transmit is canceled by calling
cec_data_cancel, that in turn can call the high-level received() driver
callback, which can call cec_transmit_msg() to transmit a new message.
The cec_data_cancel() function is called with the adap->lock mutex held,
and cec_transmit_msg() tries to take that same lock.
The root cause is that the received() callback can either be used to pass
on a received message (and then adap->lock is not held), or to report a
canceled transmit (and then adap->lock is held).
This is confusing, so create a new low-level adap_nb_transmit_canceled
callback that reports back that a non-blocking transmit was canceled.
And the received() callback is only called when a message is received,
as was the case before commit f9d0ecbf56 ("media: cec: correctly pass
on reply results") complicated matters.
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: f9d0ecbf56 ("media: cec: correctly pass on reply results")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cbe499977bc36fedae89f0a0d7deb4ccde9798fe ]
If, when waiting for a transmit to finish, the wait is interrupted,
then you might get a "transmit timed out" message, even though the
transmit was interrupted and did not actually time out.
Set transmit_in_progress_aborted to true if the
wait_for_completion_killable() call was interrupted and ensure
that the transmit is properly marked as ABORTED.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: 590a8e564c ("media: cec: abort if the current transmit was canceled")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c82aac10a6954d68f29f10d9758d016e8e5af1 ]
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9222f8ca1 ]
Using an activation counter to decide when the enable or disable the
cec adapter is not the best approach and can lead to race conditions.
Change this to determining the current status of the adapter, and
enable or disable the adapter accordingly.
It now only needs to be called whenever there is a chance that the
state changes, and it can handle enabling/disabling monitoring as
well if needed.
This simplifies the code and it should be a more robust approach as well.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ed5024ac ]
Use call_(void_)op consistently in the CEC core framework. Ditto
for the cec pin ops. And check if !adap->devnode.unregistered before
calling each op. This avoids calls to ops when the device has been
unregistered and the underlying hardware may be gone.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9d0ecbf56 ]
The results of non-blocking transmits were not correctly communicated
to userspace.
Specifically:
1) if a non-blocking transmit was canceled, then rx_status wasn't set to 0
as it should.
2) if the non-blocking transmit succeeded, but the corresponding reply
never arrived (aborted or timed out), then tx_status wasn't set to 0
as it should, and rx_status was hardcoded to ABORTED instead of the
actual reason, such as TIMEOUT. In addition, adap->ops->received() was
never called, so drivers that want to do message processing themselves
would not be informed of the failed reply.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590a8e564c ]
If a transmit-in-progress was canceled, then, once the transmit
is done, mark it as aborted and refrain from retrying the transmit.
To signal this situation the new transmit_in_progress_aborted field is
set to true.
The old implementation would just set adap->transmitting to NULL and
set adap->transmit_in_progress to false, but on the hardware level
the transmit was still ongoing. However, the framework would think
the transmit was aborted, and if a new transmit was issued, then
it could overwrite the HW buffer containing the old transmit with the
new transmit, leading to garbled data on the CEC bus.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3813c932ed ]
Don't enable/disable the adapter if the first fh is opened or the
last fh is closed, instead do this when the adapter is configured
or unconfigured, and also when we enter Monitor All or Monitor Pin
mode for the first time or we exit the Monitor All/Pin mode for the
last time.
However, if needs_hpd is true, then do this when the physical
address is set or cleared: in that case the adapter typically is
powered by the HPD, so it really is disabled when the HPD is low.
This case (needs_hpd is true) was already handled in this way, so
this wasn't changed.
The problem with the old behavior was that if the HPD goes low when
no fh is open, and a transmit was in progress, then the adapter would
be disabled, typically stopping the transmit immediately which
leaves a partial message on the bus, which isn't nice and can confuse
some adapters.
It makes much more sense to disable it only when the adapter is
unconfigured and we're not monitoring the bus, since then you really
won't be using it anymore.
To keep track of this store a CEC activation count and call adap_enable
only when it goes from 0 to 1 or back to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: 47c82aac10a6 ("media: cec: core: avoid recursive cec_claim_log_addrs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42bcaacae924bf18ae387c3f78c202df0b739292 ]
When cec_release() uses fh->msgs it has to take fh->lock,
otherwise the list can get corrupted.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f62dc8f6bf82d1b307fc37d8d22cc79f67856c2f ]
Commit d725d20e81 ("media: flexcop-usb: sanity checking of endpoint type
") adds a sanity check for endpoint[1], but fails to modify the sanity
check of bNumEndpoints.
Fix this by modifying the sanity check of bNumEndpoints to 2.
Link: https://lore.kernel.org/linux-media/20220602055027.849014-1-dzm91@hust.edu.cn
Fixes: d725d20e81 ("media: flexcop-usb: sanity checking of endpoint type")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de50478b5 ]
Add a temporary variable to make the endpoint sanity checks a bit more
readable.
While at it, fix a typo in the usb_set_interface() comment.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220822151456.27178-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f62dc8f6bf82 ("media: flexcop-usb: fix sanity check of bNumEndpoints")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faa4364bef2ec0060de381ff028d1d836600a381 ]
The subtract in this condition is reversed. The ->length is the length
of the buffer. The ->bytesused is how many bytes we have copied thus
far. When the condition is reversed that means the result of the
subtraction is always negative but since it's unsigned then the result
is a very high positive value. That means the overflow check is never
true.
Additionally, the ->bytesused doesn't actually work for this purpose
because we're not writing to "buf->mem + buf->bytesused". Instead, the
math to calculate the destination where we are writing is a bit
involved. You calculate the number of full lines already written,
multiply by two, skip a line if necessary so that we start on an odd
numbered line, and add the offset into the line.
To fix this buffer overflow, just take the actual destination where we
are writing, if the offset is already out of bounds print an error and
return. Otherwise, write up to buf->length bytes.
Fixes: 9cb2173e6e ("[media] media: Add stk1160 new driver (easycap replacement)")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a069f79bfa6ec1ea0744981ea8425c8a25322579 ]
Call devm_request_irq() before registering the async notifier, as otherwise
it would be possible to use the device before the interrupts could be
delivered to the driver.
Fixes: c2a6a07afe ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1820e16a3019b6258e6009d34432946a6ddd0a90 ]
Increase the size of led_names so it can fit any valid v4l2 device name.
Fixes:
drivers/media/radio/radio-shark2.c:197:17: warning: ‘%s’ directive output may be truncated writing up to 35 bytes into a region of size 32 [-Wformat-truncation=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bb1fd7eddcab2d28cfc11eb20f1029154dac718 ]
The return value of dvb_ca_en50221_init() is not checked here that may
cause undefined behavior in case of nonzero value return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 25aee3debe ("[media] Rename media/dvb as media/pci")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ce5d241c3ad4568c12842168288993234345c0eb upstream.
The valid_la is used to check the length requirements,
including special cases of Timer Status. If the length is
shorter than 5, that means no Duration Available is returned,
the message will be forced to be invalid.
However, the description of Duration Available in the spec
is that this parameter may be returned when these cases, or
that it can be optionally return when these cases. The key
words in the spec description are flexible choices.
Remove the special length check of Timer Status to fit the
spec which is not compulsory about that.
Signed-off-by: Nini Song <nini.song@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3de49ae81c3a0f83a554ecbce4c08e019f30168e ]
clang-16 warns about casting incompatible function pointers:
drivers/media/pci/sta2x11/sta2x11_vip.c:1057:6: error: cast from 'irqreturn_t (*)(int, struct sta2x11_vip *)' (aka 'enum irqreturn (*)(int, struct sta2x11_vip *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
Change the prototype of the irq handler to the regular version with a
local variable to adjust the argument type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: update argument documentation]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36d503ad547d1c75758a6fcdbec2806f1b6aeb41 ]
In xc4000_get_frequency():
*freq = priv->freq_hz + priv->freq_offset;
The code accesses priv->freq_hz and priv->freq_offset without holding any
lock.
In xc4000_set_params():
// Code that updates priv->freq_hz and priv->freq_offset
...
xc4000_get_frequency() and xc4000_set_params() may execute concurrently,
risking inconsistent reads of priv->freq_hz and priv->freq_offset. Since
these related data may update during reading, it can result in incorrect
frequency calculation, leading to atomicity violations.
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 6.2.
To address this issue, it is proposed to add a mutex lock pair in
xc4000_get_frequency() to ensure atomicity. With this patch applied, our
tool no longer reports the possible bug, with the kernel configuration
allyesconfig for x86_64. Due to the lack of associated hardware, we cannot
test the patch in runtime testing, and just verify it according to the
code logic.
[1] https://sites.google.com/view/basscheck/
Fixes: 4c07e32884 ("[media] xc4000: Fix get_frequency()")
Cc: stable@vger.kernel.org
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfb1b99802ef16045402deb855c197591dc78886 ]
The ipi handler here tries hard to maintain const-ness of its argument,
but by doing that causes a warning about function type casts:
drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c:38:32: error: cast from 'mtk_vcodec_ipi_handler' (aka 'void (*)(void *, unsigned int, void *)') to 'ipi_handler_t' (aka 'void (*)(const void *, unsigned int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
38 | ipi_handler_t handler_const = (ipi_handler_t)handler;
| ^~~~~~~~~~~~~~~~~~~~~~
Remove the hack and just use a non-const argument.
Fixes: bf1d556ad4 ("media: mtk-vcodec: abstract firmware interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0b07f712bf61e1a3cf23c87c663791c42e50837 ]
When saa7146_register_device and saa7146_vv_init fails, budget_av_attach
should free the resources it allocates, like the error-handling of
ttpci_budget_init does. Besides, there are two fixme comment refers to
such deallocations.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9b683844b01d171a72b9c0419a2d760d946ee12 ]
In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without
a deallocation thereafter. After the following call chain:
saa7134_go7007_init
|-> go7007_boot_encoder
|-> go7007_load_encoder
|-> kfree(go)
go is freed and thus bounce is leaked.
Fixes: 95ef39403f ("[media] go7007: remember boot firmware")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a4cf27d1f0538f779bf31b8c99eda394e277119 ]
A previous patch worked around a KASAN issue in stv0367, now a similar
problem showed up with clang:
drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in 'stv0367ter_set_frontend' [-Werror,-Wframe-larger-than]
1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe)
Rework the stv0367_writereg() function to be simpler and mark both
register access functions as noinline_for_stack so the temporary
i2c_msg structures do not get duplicated on the stack when KASAN_STACK
is enabled.
Fixes: 3cd890dbe2 ("media: dvb-frontends: fix i2c access helpers for KASAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30baa4a96b23add91a87305baaeba82c4e109e1f ]
clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2,
which casts three different prototypes into pvr2_stream_callback:
drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1070 | pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
110 | (void (*)(void *))pvr2_context_notify,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
152 | (pvr2_stream_callback) pvr2_dvb_notify, adap);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change the functions to actually take a void* argument so the cast is no longer
needed.
Fixes: bb8ce9d914 ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95ac1210fb2753f968ebce0730d4fbc553c2a3dc ]
Pointer dip->stream cannot be NULL due to a shift, thus remove redundant
NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c74e006268 ("V4L/DVB (5059): Pvrusb2: Be smarter about mode restoration")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b70530ee740861f4776ff724fcc25023df1799a ]
If go7007_read_addr() returns error channel is not assigned a value.
In this case go to allocfail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 866b8695d6 ("Staging: add the go7007 video driver")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 856525e8db272b0ce6d9c6e6c2eeb97892b485a6 ]
While there is no good explanation what this value does, vendor driver
uses value 31 for it. Align driver with it.
Fixes: a4260ea495 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cff104e33bad38f4b2c8d58816a7accfaa2879f9 ]
According to user manual, reset line should be deasserted before clocks
are enabled. Also fix power down sequence to be reverse of that.
Fixes: a4260ea495 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 794b581f8c6eb7b60fe468ccb96dd3cd38ff779f ]
Currently coefficients are applied only once, since they don't change.
However, this is done before enable bit is set and thus it doesn't get
applied properly.
Fix that by applying coefficients after enable bit is set. While this
means that it will be done evey time, it doesn't bring much time
penalty.
Fixes: a4260ea495 ("media: sun4i: Add H3 deinterlace driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c64f4cdf4e6cc5682c52523713af8c39c94e6d5 ]
In dvb_register_device, *pdvbdev is set equal to dvbdev, which is freed
in several error-handling paths. However, *pdvbdev is not set to NULL
after dvbdev's deallocation, causing use-after-frees in many places,
for example, in the following call chain:
budget_register
|-> dvb_dmxdev_init
|-> dvb_register_device
|-> dvb_dmxdev_release
|-> dvb_unregister_device
|-> dvb_remove_device
|-> dvb_device_put
|-> kref_put
When calling dvb_unregister_device, dmxdev->dvbdev (i.e. *pdvbdev in
dvb_register_device) could point to memory that had been freed in
dvb_register_device. Thereafter, this pointer is transferred to
kref_put and triggering a use-after-free.
Link: https://lore.kernel.org/linux-media/20240203134046.3120099-1-alexious@zju.edu.cn
Fixes: b619010247 ("V4L/DVB (5244): Dvbdev: fix illegal re-usage of fileoperations struct")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f94b49a5b5d386c038e355bef6347298aabd211 ]
The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity
but isn't freed in its following error-handling paths. This patch
adds such deallocation to prevent memleak of entity->name.
Fixes: be2fff6563 ("media: add helpers for memory-to-memory media controller")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf9c5051076e0eb958f4361d50d8b0c3ee6691c ]
In tpg_alloc, resources should be deallocated in each and every
error-handling paths, since they are allocated in for statements.
Otherwise there would be memleaks because tpg_free is called only when
tpg_alloc return 0.
Fixes: 63881df94d ("[media] vivid: add the Test Pattern Generator")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd61d77a3d28444b2635f0c8b5a2ecd6a4d94026 ]
Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.
Add a comment above the call to prevent future unnecessary changes.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: 37ecc7b127 ("[media] em28xx: add media controller support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a107d643b2a3382e0a2d2c4ef08bf8c6bff4561d upstream.
This reverts commit 85d2a31fe4d9be1555f621ead7a520d8791e0f74.
The rkisp1 does share interrupt lines on some platforms, after all. Thus
we need to revert this, and implement a fix for the rkisp1 shared irq
handling in a follow-up patch.
Closes: https://lore.kernel.org/all/87o7eo8vym.fsf@gmail.com/
Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-1-173007628248@ideasonboard.com
Reported-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dc9ceb90c4b42c6e5c6757df1d6257110433788e ]
When irtoy_command fails, buf should be freed since it is allocated by
irtoy_tx, or there is a memleak.
Fixes: 4114978dcd ("media: ir_toy: prevent device from hanging during transmit")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b95ad7a8d56248dfc34f861e445fad7a4004f4 ]
The V4L2_CID_HBLANK control is marked as readonly and can only be a
single value.
Set the minimum and maximum value to match the mode value.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09b4195021be69af1e1936cca995712a6d0f2562 ]
Error code is assigned to 'stat', return 'stat' rather than '-1'.
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d2a31fe4d9be1555f621ead7a520d8791e0f74 ]
In all known platforms the ISP has dedicated IRQ lines, but for some
reason the driver uses IRQF_SHARED.
Supporting IRQF_SHARED properly requires handling interrupts even when
our device is disabled, and the driver does not handle this. To avoid
adding such code, and to be sure the driver won't accidentally be used
in a platform with shared interrupts, let's drop the IRQF_SHARED flag.
Link: https://lore.kernel.org/r/20231207-rkisp-irq-fix-v3-1-358a2c871a3c@ideasonboard.com
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e7dc39260edac180c206bb6149595a40eabae3e ]
When using 32 bit RGB formats, the RGA on the rk3568 produces wrong
colors as the wrong color channels are read or written. The reason is
that the format description for the channel swizzeling is wrong and the
wrong bits are configured. For example, when converting ARGB32 to NV12,
the alpha channel is used as blue channel.. This doesn't happen if the
color format is the same on both sides.
Fix the color_swap settings of the formats to correctly handle 32 bit
RGB formats.
For RGA_COLOR_FMT_XBGR8888, the RGA_COLOR_ALPHA_SWAP bit doesn't have an
effect. Thus, it isn't possible to handle the V4L2_PIX_FMT_XRGB32. Thus,
it is removed from the list of supported formats.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3695e86d25aafbe175dd51f6aaf6f68d341d590 ]
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 206c857dd17d4d026de85866f1b5f0969f2a109e ]
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work.
In mtk_jpeg_dec_device_run, if error happens in
mtk_jpeg_set_dec_dst, it will finally start the worker while
mark the job as finished by invoking v4l2_m2m_job_finish.
There are two methods to trigger the bug. If we remove the
module, it which will call mtk_jpeg_remove to make cleanup.
The possible sequence is as follows, which will cause a
use-after-free bug.
CPU0 CPU1
mtk_jpeg_dec_... |
start worker |
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
If we close the file descriptor, which will call mtk_jpeg_release,
it will have a similar sequence.
Fix this bug by starting timeout worker only if started jpegdec worker
successfully. Then v4l2_m2m_job_finish will only be called in
either mtk_jpeg_job_timeout_work or mtk_jpeg_dec_device_run.
Fixes: b2f0d2724b ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e242e9c144050ed120cf666642ba96b7c4462a4c upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63f ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efa5fe19c0a9199f49e36e1f5242ed5c88da617d upstream.
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7d ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5b2f885e2f6f482d05c23f04c8240f7b4fc5bdb5 ]
If an error occurs after a successful i2c_mux_add_adapter(), then
i2c_mux_del_adapters() should be called to free some resources, as
already done in the remove function.
Fixes: e6089feca4 ("media: m88ds3103: Add support for ds3103b demod")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil
Dongliang Mu
Johan Hovold
Dan Carpenter
Sakari Ailus
Andy Shevchenko
Ricardo Ribalda
Aleksandr Burakov
Nini Song
Arnd Bergmann
Gui-Dong Han
Zhipeng Lu
Edward Adam Davis
Daniil Dulov
Jernej Skrabec
Nikita Zhandarovich
Alexander Stein
Tomi Valkeinen
Sean Young
Kieran Bingham
Su Hui
Michael Tretter
Ghanshyam Agrawal
Zheng Wang
Bingbu Cao
Christophe JAILLET
Laurent Pinchart