Граф коммитов

34 Коммитов

Автор SHA1 Сообщение Дата
Jan Kara 9599b0e597 jbd2: Annotate transaction start also for jbd2_journal_restart()
lockdep annotation for a transaction start has been at the end of
jbd2_journal_start(). But a transaction is also started from
jbd2_journal_restart(). Move the lockdep annotation to start_this_handle()
which covers both cases.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-17 21:23:17 -04:00
Andreas Dilger b1f485f20e jbd2: round commit timer up to avoid uncommitted transaction
fix jiffie rounding in jbd commit timer setup code.  Rounding down
could cause the timer to be fired before the corresponding transaction
has expired.  That transaction can stay not committed forever if no
new transaction is created or expicit sync/umount happens.

Signed-off-by: Alex Zhuravlev (Tomas) <alex.zhuravlev@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-08-10 22:51:53 -04:00
Jan Kara f91d1d0417 jbd2: Fix a race between checkpointing code and journal_get_write_access()
The following race can happen:

 CPU1                          CPU2
                               checkpointing code checks the buffer, adds
                                 it to an array for writeback
 do_get_write_access()
 ...
 lock_buffer()
 unlock_buffer()
                               flush_batch() submits the buffer for IO
 __jbd2_journal_file_buffer()

So a buffer under writeout is returned from
do_get_write_access(). Since the filesystem code relies on the fact
that journaled buffers cannot be written out, it does not take the
buffer lock and so it can modify buffer while it is under
writeout. That can lead to a filesystem corruption if we crash at the
right moment.

We fix the problem by clearing the buffer dirty bit under buffer_lock
even if the buffer is on BJ_None list. Actually, we clear the dirty
bit regardless the list the buffer is in and warn about the fact if
the buffer is already journalled.

Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>.

Reported-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-07-13 16:16:20 -04:00
Hisashi Hifumi 536fc240e7 jbd2: clean up jbd2_journal_try_to_free_buffers()
This patch reverts 3f31fddf, which is no longer needed because if a
race between freeing buffer and committing transaction functionality
occurs and dio gets error, currently dio falls back to buffered IO due
to the commit 6ccfa806.

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-06-17 20:08:51 -04:00
Theodore Ts'o 7058548cd5 ext4: Use WRITE_SYNC for commits which are caused by fsync()
If a commit is triggered by fsync(), set a flag indicating the journal
blocks associated with the transaction should be flushed out using
WRITE_SYNC.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-03-25 23:35:46 -04:00
Jan Kara 7f5aa21508 jbd2: Avoid possible NULL dereference in jbd2_journal_begin_ordered_truncate()
If we race with commit code setting i_transaction to NULL, we could
possibly dereference it.  Proper locking requires the journal pointer
(to access journal->j_list_lock), which we don't have.  So we have to
change the prototype of the function so that filesystem passes us the
journal pointer.  Also add a more detailed comment about why the
function jbd2_journal_begin_ordered_truncate() does what it does and
how it should be used.

Thanks to Dan Carpenter <error27@gmail.com> for pointing to the
suspitious code.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Joel Becker <joel.becker@oracle.com>
CC: linux-ext4@vger.kernel.org
CC: ocfs2-devel@oss.oracle.com
CC: mfasheh@suse.de
CC: Dan Carpenter <error27@gmail.com>
2009-02-10 11:15:34 -05:00
Linus Torvalds 2150edc6c5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...
2009-01-08 17:14:59 -08:00
Joel Becker e06c8227fd jbd2: Add buffer triggers
Filesystems often to do compute intensive operation on some
metadata.  If this operation is repeated many times, it can be very
expensive.  It would be much nicer if the operation could be performed
once before a buffer goes to disk.

This adds triggers to jbd2 buffer heads.  Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer.  If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.

ocfs2 will use this feature.

Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion.  It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t).  So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.

There is only one trigger set allowed per buffer.  I can't think of any
reason to attach more than one set.  Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.

The trigger sets are considered static allocation from the jbd2
perspective.  ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05 08:40:30 -08:00
Theodore Ts'o 30773840c1 ext4: add fsync batch tuning knobs
Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-01-03 20:27:38 -05:00
Josef Bacik e07f7183a4 jbd2: improve jbd2 fsync batching
This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running.  If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage.  With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time.  This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-11-26 01:14:26 -05:00
Theodore Ts'o 3e624fc72f ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback
The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed.  Previously this was done via a polling mechanism
when blocks are allocated or freed.  A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-10-16 20:00:24 -04:00
Ingo Molnar 3295f0ef9f lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]()
the names were too generic:

 drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
 drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
 drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 10:30:30 +02:00
Peter Zijlstra 4f3e7524b2 lockdep: map_acquire
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:23 +02:00
Jan Kara 87c89c232c jbd2: Remove data=ordered mode support using jbd buffer heads
Signed-off-by: Jan Kara <jack@suse.cz>
2008-07-11 19:27:31 -04:00
Jan Kara c851ed5401 jbd2: Implement data=ordered mode handling via inodes
This patch adds necessary framework into JBD2 to be able to track inodes
with each transaction and write-out their dirty data during transaction
commit time.

This new ordered mode brings all sorts of advantages such as possibility 
to get rid of journal heads and buffer heads for data buffers in ordered 
mode, better ordering of writes on transaction commit, simplification of
 some JBD code, no more anonymous pages when truncate of data being 
committed happens.  Also with this new ordered mode, delayed allocation 
on ordered mode is much simpler.

Signed-off-by: Jan Kara <jack@suse.cz>
2008-07-11 19:27:31 -04:00
Mingming Cao 530576bbf3 jbd2: fix race between jbd2_journal_try_to_free_buffers() and jbd2 commit transaction
journal_try_to_free_buffers() could race with jbd commit transaction
when the later is holding the buffer reference while waiting for the
data buffer to flush to disk. If the caller of
journal_try_to_free_buffers() request tries hard to release the buffers,
it will treat the failure as error and return back to the caller. We
have seen the directo IO failed due to this race.  Some of the caller of
releasepage() also expecting the buffer to be dropped when passed with
GFP_KERNEL mask to the releasepage()->journal_try_to_free_buffers().

With this patch, if the caller is passing the GFP_KERNEL to indicating
this call could wait, in case of try_to_free_buffers() failed, let's
waiting for journal_commit_transaction() to finish commit the current
committing transaction , then try to free those buffers again with
journal locked.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com> 
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-07-13 21:06:39 -04:00
Harvey Harrison 329d291f50 jdb2: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Randy Dunlap 5648ba5b2d jbd2: fix kernel-doc notation
Fix kernel-doc notation in jbd2.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Josef Bacik 1dfc3220d9 jbd2: fix possible journal overflow issues
There are several cases where the running transaction can get buffers
added to its BJ_Metadata list which it never dirtied, which makes its
t_nr_buffers counter end up larger than its t_outstanding_credits
counter.

This will cause issues when starting new transactions as while we are
logging buffers we decrement t_outstanding_buffers, so when
t_outstanding_buffers goes negative, we will report that we need less
space in the journal than we actually need, so transactions will be
started even though there may not be enough room for them.  In the worst
case scenario (which admittedly is almost impossible to reproduce) this
will result in the journal running out of space.

The fix is to only refile buffers from the committing transaction to the
running transactions BJ_Modified list when b_modified is set on that
journal, which is the only way to be sure if the running transaction has
modified that buffer.

This patch also fixes an accounting error in journal_forget, it is
possible that we can call journal_forget on a buffer without having
modified it, only gotten write access to it, so instead of freeing a
credit, we only do so if the buffer was modified.  The assert will help
catch if this problem occurs.  Without these two patches I could hit
this assert within minutes of running postmark, with them this issue no
longer arises.

Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Josef Bacik 9fc7c63a1d jbd2: fix the way the b_modified flag is cleared
Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.

The problem is that everywhere else this flag is modified only under the jbd2
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.

This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to.  This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.

That will be important for the next patch in this series.  Tested thoroughly
by myself using postmark/iozone/bonnie++.

Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-04-17 10:38:59 -04:00
Mingming Cao 4019191be7 jbd2: sparse pointer use of zero as null
Get rid of sparse related warnings from places that use integer as NULL
pointer.  (Ported from upstream ext3/jbd changes.)

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Mingming Cao db857da336 jbd2: Use round-jiffies() function for the "5 second" ext4/jbd2 wakeup
While "every 5 seconds" doesn't sound as a problem, there can be many
of these (and these timers do add up over all the kernel).  The "5
second" wakeup isn't really timing sensitive; in addition even with
rounding it'll still happen every 5 seconds (with the exception of the
very first time, which is likely to be rounded up to somewhere closer
to 6 seconds)

(Ported from similar JBD patch made by Arjan van de Ven to
fs/jbd/transaction.c)

Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Mingming Cao 7b7510662f jbd2: add lockdep support
Ported from similar patch for the jbd layer.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2008-01-28 23:58:27 -05:00
Johann Lombardi 8e85fb3f30 jbd2: jbd2 stats through procfs
The patch below updates the jbd stats patch to 2.6.20/jbd2.
The initial patch was posted by Alex Tomas in December 2005
(http://marc.info/?l=linux-ext4&m=113538565128617&w=2).
It provides statistics via procfs such as transaction lifetime and size.

Sometimes, investigating performance problems, i find useful to have
stats from jbd about transaction's lifetime, size, etc. here is a
patch for review and inclusion probably.

for example, stats after creation of 3M files in htree directory:

[root@bob ~]# cat /proc/fs/jbd/sda/history
R/C  tid   wait  run   lock  flush log   hndls  block inlog ctime write drop  close
R    261   8260  2720  0     0     750   9892   8170  8187
C    259                                                    750   0     4885  1
R    262   20    2200  10    0     770   9836   8170  8187
R    263   30    2200  10    0     3070  9812   8170  8187
R    264   0     5000  10    0     1340  0      0     0
C    261                                                    8240  3212  4957  0
R    265   8260  1470  0     0     4640  9854   8170  8187
R    266   0     5000  10    0     1460  0      0     0
C    262                                                    8210  2989  4868  0
R    267   8230  1490  10    0     4440  9875   8171  8188
R    268   0     5000  10    0     1260  0      0     0
C    263                                                    7710  2937  4908  0
R    269   7730  1470  10    0     3330  9841   8170  8187
R    270   0     5000  10    0     830   0      0     0
C    265                                                    8140  3234  4898  0
C    267                                                    720   0     4849  1
R    271   8630  2740  20    0     740   9819   8170  8187
C    269                                                    800   0     4214  1
R    272   40    2170  10    0     830   9716   8170  8187
R    273   40    2280  0     0     3530  9799   8170  8187
R    274   0     5000  10    0     990   0      0     0


where,

R     - line for transaction's life from T_RUNNING to T_FINISHED
C     - line for transaction's checkpointing
tid   - transaction's id
wait  - for how long we were waiting for new transaction to start
         (the longest period journal_start() took in this transaction)
run   - real transaction's lifetime (from T_RUNNING to T_LOCKED
lock  - how long we were waiting for all handles to close
         (time the transaction was in T_LOCKED)
flush - how long it took to flush all data (data=ordered)
log   - how long it took to write the transaction to the log
hndls - how many handles got to the transaction
block - how many blocks got to the transaction
inlog - how many blocks are written to the log (block + descriptors)
ctime - how long it took to checkpoint the transaction
write - how many blocks have been written during checkpointing
drop  - how many blocks have been dropped during checkpointing
close - how many running transactions have been closed to checkpoint this one

all times are in msec.


[root@bob ~]# cat /proc/fs/jbd/sda/info
280 transaction, each upto 8192 blocks
average:
  1633ms waiting for transaction
  3616ms running transaction
  5ms transaction was being locked
  1ms flushing data (in ordered mode)
  1799ms logging transaction
  11781 handles per transaction
  5629 blocks per transaction
  5641 logged blocks per transaction

Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
2008-01-28 23:58:27 -05:00
Mingming Cao d802ffa885 JBD2/Ext4: Convert kmalloc to kzalloc in jbd2/ext4
Convert kmalloc to kzalloc() and get rid of the memset().

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao 2d917969bc JBD2: replace jbd_kmalloc with kmalloc directly.
This patch cleans up jbd_kmalloc and replace it with kmalloc directly

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:57 -04:00
Mingming Cao af1e76d6b3 JBD2: jbd2 slab allocation cleanups
JBD2: Replace slab allocations with page allocations

JBD2 allocate memory for committed_data and frozen_data from slab. However
JBD2 should not pass slab pages down to the block layer. Use page allocator
pages instead. This will also prepare JBD for the large blocksize patchset.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
2007-10-17 18:49:56 -04:00
Uwe Kleine-König 5886269962 fix file specification in comments
Many files include the filename at the beginning, serveral used a wrong one.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-09 08:58:16 +02:00
Randy Dunlap e63340ae6b header cleaning: don't include smp_lock.h when not used
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.

Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:07 -07:00
Adrian Bunk 7ddae86095 [PATCH] make fs/jbd2/transaction.c:__kbd2_journal_temp_unlink_buffer() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:40 -08:00
Eric Sandeen 9b57988db9 [PATCH] jbd2: journal_dirty_data re-check for unmapped buffers
When running several fsx's and other filesystem stress tests, we found
cases where an unmapped buffer was still being sent to submit_bh by the
ext3 dirty data journaling code.

I saw this happen in two ways, both related to another thread doing a
truncate which would unmap the buffer in question.

Either we would get into journal_dirty_data with a bh which was already
unmapped (although journal_dirty_data_fn had checked for this earlier, the
state was not locked at that point), or it would get unmapped in the middle
of journal_dirty_data when we dropped locks to call sync_dirty_buffer.

By re-checking for mapped state after we've acquired the bh state lock, we
should avoid these races.  If we find a buffer which is no longer mapped,
we essentially ignore it, because journal_unmap_buffer has already decided
that this buffer can go away.

I've also added tracepoints in these two cases, and made a couple other
tracepoint changes that I found useful in debugging this.

Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-28 11:30:51 -07:00
OGAWA Hirofumi 3e2a532b26 [PATCH] ext3/4: fix J_ASSERT(transaction->t_updates > 0) in journal_stop()
A disk generated some I/O error, after it, I hitted
J_ASSERT(transaction->t_updates > 0) in journal_stop().

It seems to happened on ext3_truncate() path from stack trace. Then,
maybe the following case may trigger J_ASSERT(transaction->t_updates > 0).

ext3_truncate()
    -> ext3_free_branches()
        -> ext3_journal_test_restart()
	    -> ext3_journal_restart()
                -> journal_restart()
                transaction->t_updates--;
                /* another process aborted journal */
                    -> start_this_handle()
		    returns -EROFS without transaction->t_updates++;

    -> ext3_journal_stop()
        -> journal_stop()
	J_ASSERT(transaction->t_updates > 0)

If journal was aborted in middle of journal_restart(), ext3_truncate()
may trigger J_ASSERT().

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-20 10:26:44 -07:00
Mingming Cao f7f4bccb72 [PATCH] jbd2: rename jbd2 symbols to avoid duplication of jbd symbols
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00
Dave Kleikamp 470decc613 [PATCH] jbd2: initial copy of files from jbd
This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h

Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 11:14:15 -07:00