Commit a0c516cbfc ("zram: don't grab mutex in zram_slot_free_noity")
introduced free request pending code to avoid scheduling by mutex under
spinlock and it was a mess which made code lenghty and increased
overhead.
Now, we don't need zram->lock any more to free slot so this patch
reverts it and then, tb_lock should protect it.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the zram table is protected by zram->lock but it's rather
coarse-grained lock and it makes hard for scalibility.
Let's use own rwlock instead of depending on zram->lock. This patch
adds new locking so obviously, it would make slow but this patch is just
prepartion for removing coarse-grained rw_semaphore(ie, zram->lock)
which is hurdle about zram scalability.
Final patch in this patchset series will remove the lock from read-path
and change rw_semaphore with mutex in write path. With bonus, we could
drop pending slot free mess in next patch.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a0c516cbfc ("zram: don't grab mutex in zram_slot_free_noity")
introduced pending zram slot free in zram's write path in case of
missing slot free by memory allocation failure in zram_slot_free_notify
but it is not necessary because we have already freed the slot right
before overwriting.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sergey reported we don't need to handle pending free request every I/O
so that this patch removes it in read path while we remain it in write
path.
Let's consider below example.
Swap subsystem ask to zram "A" block free by swap_slot_free_notify but
zram had been pended it without real freeing. Swap subsystem allocates
"A" block for new data but request pended for a long time just handled
and zram blindly free new data on the "A" block. :(
That's why we couldn't remove handle pending free request right before
zram-write.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan and Sergey reported that there is a racy between reset and flushing
of pending work so that it could make oops by freeing zram->meta in
reset while zram_slot_free can access zram->meta if new request is
adding during the race window.
This patch moves flush after taking init_lock so it prevents new request
so that it closes the race.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tAdd adds maintainer information for zsmalloc into the MAINTAINERS file.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add maintainer information for zram into the MAINTAINERS file.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add my copyright to the zsmalloc source code which I maintain.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add my copyright to the zram source code which I maintain.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the old private compcache project address so upcoming patches
should be sent to LKML because we Linux kernel community will take care.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zram has lived in staging for a LONG LONG time and have been
fixed/improved by many contributors so code is clean and stable now. Of
course, there are lots of product using zram in real practice.
The major TV companys have used zram as swap since two years ago and
recently our production team released android smart phone with zram
which is used as swap, too and recently Android Kitkat start to use zram
for small memory smart phone. And there was a report Google released
their ChromeOS with zram, too and cyanogenmod have been used zram long
time ago. And I heard some disto have used zram block device for tmpfs.
In addition, I saw many report from many other peoples. For example,
Lubuntu start to use it.
The benefit of zram is very clear. With my experience, one of the
benefit was to remove jitter of video application with backgroud memory
pressure. It would be effect of efficient memory usage by compression
but more issue is whether swap is there or not in the system. Recent
mobile platforms have used JAVA so there are many anonymous pages. But
embedded system normally are reluctant to use eMMC or SDCard as swap
because there is wear-leveling and latency issues so if we do not use
swap, it means we can't reclaim anoymous pages and at last, we could
encounter OOM kill. :(
Although we have real storage as swap, it was a problem, too. Because
it sometime ends up making system very unresponsible caused by slow swap
storage performance.
Quote from Luigi on Google
"Since Chrome OS was mentioned: the main reason why we don't use swap
to a disk (rotating or SSD) is because it doesn't degrade gracefully
and leads to a bad interactive experience. Generally we prefer to
manage RAM at a higher level, by transparently killing and restarting
processes. But we noticed that zram is fast enough to be competitive
with the latter, and it lets us make more efficient use of the
available RAM. " and he announced.
http://www.spinics.net/lists/linux-mm/msg57717.html
Other uses case is to use zram for block device. Zram is block device
so anyone can format the block device and mount on it so some guys on
the internet start zram as /var/tmp.
http://forums.gentoo.org/viewtopic-t-838198-start-0.html
Let's promote zram and enhance/maintain it instead of removing.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch moves zsmalloc under mm directory.
Before that, description will explain why we have needed custom
allocator.
Zsmalloc is a new slab-based memory allocator for storing compressed
pages. It is designed for low fragmentation and high allocation success
rate on large object, but <= PAGE_SIZE allocations.
zsmalloc differs from the kernel slab allocator in two primary ways to
achieve these design goals.
zsmalloc never requires high order page allocations to back slabs, or
"size classes" in zsmalloc terms. Instead it allows multiple
single-order pages to be stitched together into a "zspage" which backs
the slab. This allows for higher allocation success rate under memory
pressure.
Also, zsmalloc allows objects to span page boundaries within the zspage.
This allows for lower fragmentation than could be had with the kernel
slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the
kernel slab allocator, if a page compresses to 60% of it original size,
the memory savings gained through compression is lost in fragmentation
because another object of the same size can't be stored in the leftover
space.
This ability to span pages results in zsmalloc allocations not being
directly addressable by the user. The user is given an
non-dereferencable handle in response to an allocation request. That
handle must be mapped, using zs_map_object(), which returns a pointer to
the mapped region that can be used. The mapping is necessary since the
object data may reside in two different noncontigious pages.
The zsmalloc fulfills the allocation needs for zram perfectly
[sjenning@linux.vnet.ibm.com: borrow Seth's quote]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Nitin Gupta <ngupta@vflare.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After commit 9a46ad6d6d ("smp: make smp_call_function_many() use logic
similar to smp_call_function_single()"), cfd->cpumask is accessed only
in smp_call_function_many(). So there is no more need to copy it into
cfd->cpumask_ipi before putting csd into the list. The cpumask_ipi
field is obsolete and can be removed.
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Wang YanQing <udknight@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make smp_call_function_single and friends more efficient by using a
lockless list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is required to call put_device() if device_register() fails, so that
we give up the last reference to the device. Calling put_device allows
for mdiobus_release to be executed, kfreeing the bus.
Signed-off-by: Levente Kurusa <levex@linux.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Daney <david.daney@cavium.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we kfree the container of the device which failed to register.
This is wrong as the last reference is not given up with a put_device
call. Also, now that we have put_device() callen, we no longer need the
kfree as the new_ld->dev.release function will take care of kfreeing the
associated memory.
Signed-off-by: Levente Kurusa <levex@linux.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now we have memblock_virt_alloc_low to replace original bootmem api in
swiotlb.
But we should not use BOOTMEM_LOW_LIMIT for arch that does not support
CONFIG_NOBOOTMEM, as old api take 0.
| #define alloc_bootmem_low(x) \
| __alloc_bootmem_low(x, SMP_CACHE_BYTES, 0)
|#define alloc_bootmem_low_pages_nopanic(x) \
| __alloc_bootmem_low_nopanic(x, PAGE_SIZE, 0)
and we have
#define BOOTMEM_LOW_LIMIT __pa(MAX_DMA_ADDRESS)
for CONFIG_NOBOOTMEM.
Restore goal to 0 to fix ia64 crash, that Tony found.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reported-by: Tony Luck <tony.luck@gmail.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block IO driver changes from Jens Axboe:
- bcache update from Kent Overstreet.
- two bcache fixes from Nicholas Swenson.
- cciss pci init error fix from Andrew.
- underflow fix in the parallel IDE pg_write code from Dan Carpenter.
I'm sure the 1 (or 0) users of that are now happy.
- two PCI related fixes for sx8 from Jingoo Han.
- floppy init fix for first block read from Jiri Kosina.
- pktcdvd error return miss fix from Julia Lawall.
- removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
Michael Opdenacker.
- comment typo fix for the loop driver from Olaf Hering.
- potential oops fix for null_blk from Raghavendra K T.
- two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
an OOM problem and a problem with handling security locked conditions
* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
mg_disk: Spelling s/finised/finished/
null_blk: Null pointer deference problem in alloc_page_buffers
mtip32xx: Correctly handle security locked condition
mtip32xx: Make SGL container per-command to eliminate high order dma allocation
drivers/block/loop.c: fix comment typo in loop_config_discard
drivers/block/cciss.c:cciss_init_one(): use proper errnos
drivers/block/paride/pg.c: underflow bug in pg_write()
drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
drivers/block/sx8.c: use module_pci_driver()
floppy: bail out in open() if drive is not responding to block0 read
bcache: Fix auxiliary search trees for key size > cacheline size
bcache: Don't return -EINTR when insert finished
bcache: Improve bucket_prio() calculation
bcache: Add bch_bkey_equal_header()
bcache: update bch_bkey_try_merge
bcache: Move insert_fixup() to btree_keys_ops
bcache: Convert sorting to btree_keys
bcache: Convert debug code to btree_keys
bcache: Convert btree_iter to struct btree_keys
bcache: Refactor bset_tree sysfs stats
...
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Pull nfsd updates from Bruce Fields:
- Handle some loose ends from the vfs read delegation support.
(For example nfsd can stop breaking leases on its own in a
fewer places where it can now depend on the vfs to.)
- Make life a little easier for NFSv4-only configurations
(thanks to Kinglong Mee).
- Fix some gss-proxy problems (thanks Jeff Layton).
- miscellaneous bug fixes and cleanup
* 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits)
nfsd: consider CLAIM_FH when handing out delegation
nfsd4: fix delegation-unlink/rename race
nfsd4: delay setting current_fh in open
nfsd4: minor nfs4_setlease cleanup
gss_krb5: use lcm from kernel lib
nfsd4: decrease nfsd4_encode_fattr stack usage
nfsd: fix encode_entryplus_baggage stack usage
nfsd4: simplify xdr encoding of nfsv4 names
nfsd4: encode_rdattr_error cleanup
nfsd4: nfsd4_encode_fattr cleanup
minor svcauth_gss.c cleanup
nfsd4: better VERIFY comment
nfsd4: break only delegations when appropriate
NFSD: Fix a memory leak in nfsd4_create_session
sunrpc: get rid of use_gssp_lock
sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt
sunrpc: don't wait for write before allowing reads from use-gss-proxy file
nfsd: get rid of unused function definition
Define op_iattr for nfsd4_open instead using macro
NFSD: fix compile warning without CONFIG_NFSD_V3
...
Fix
drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_parisc_probe':
drivers/char/ipmi/ipmi_si_intf.c:2752:2: error: 'rv' undeclared (first use in this function)
drivers/char/ipmi/ipmi_si_intf.c:2752:2: note: each undeclared identifier is reported only once for each function it appears in
Introduced by commit d02b3709ff ("ipmi: Cleanup error return")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Mason reported a NULL pointer derefernence in generic_getxattr()
that was due to sb->s_xattr being NULL.
The reason is that the nfs #ifdef's for ACL support were misplaced, and
the nfs3 inode operations had the xattr operation pointers set up, even
though xattrs were not actually supported. As a result, the xattr code
was being called without the infrastructure having been set up.
Move the #ifdef's appropriately.
Reported-and-tested-by: Chris Mason <clm@fb.com>
Acked-by: Al Viro viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both clang 3.5 and GCC 4.9 will support this (as of r199754 and r207196
respectively). Both have been tested to produce booting kernels when the
16-bit code is built with -m16. (Modulo LLVM PR3997, at least.)
[ hpa: folded test for -m16 into M16_CFLAGS ]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Link: http://lkml.kernel.org/r/1390997807.20153.133.camel@i7.infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Commit dd78b97367 ("x86, boot: Move CPU
flags out of cpucheck") introduced ambiguous inline asm in the
has_eflag() function. In 16-bit mode want the instruction to be
'pushfl', but we just say 'pushf' and hope the compiler does what we
wanted.
When building with 'clang -m16', it won't, because clang doesn't use
the horrid '.code16gcc' hack that even 'gcc -m16' uses internally.
Say what we mean and don't make the compiler make assumptions.
[ hpa: ideally we would be able to use the gcc %zN construct here, but
that is broken for 64-bit integers in gcc < 4.5.
The code with plain "pushf/popf" is fine for 32- or 64-bit mode, but
not for 16-bit mode; in 16-bit mode those are 16-bit instructions in
.code16 mode, and 32-bit instructions in .code16gcc mode. ]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Link: http://lkml.kernel.org/r/1391079628.26079.82.camel@shinybook.infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
So any FIQ handling is superfluous at the moment. The functions to
disable/enable FIQs is kept around if ever someone needs them in the
future, but existing calling sites including arch_cpu_idle_prepare()
may go for now.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On ARM, address size can be 32 bits or 64 bits (if CONFIG_ARCH_PHYS_ADDR_T_64BIT
is enabled).
We can't assume that the grant frame base address will always fits in an
unsigned long. Use phys_addr_t instead of unsigned long as argument for
gnttab_setup_auto_xlat_frames.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
The use of phys_to_machine and machine_to_phys in the phys<=>bus conversions
causes us to lose the top bits of the DMA address if the size of a DMA address is not the same as the size of the phyiscal address.
This can happen in practice on ARM where foreign pages can be above 4GB even
though the local kernel does not have LPAE page tables enabled (which is
totally reasonable if the guest does not itself have >4GB of RAM). In this
case the kernel still maps the foreign pages at a phys addr below 4G (as it
must) but the resulting DMA address (returned by the grant map operation) is
much higher.
This is analogous to a hardware device which has its view of RAM mapped up
high for some reason.
This patch makes I/O to foreign pages (specifically blkif) work on 32-bit ARM
systems with more than 4GB of RAM.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Event channels driver needs to be initialized very early. Until now, Xen
initialization was done after all CPUs was bring up.
We can safely move the initialization to an early initcall.
Also use a cpu notifier to:
- Register the VCPU when the CPU is prepared
- Enable event channel IRQ when the CPU is running
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch fixes a percpu_ref_put race for se_lun->lun_ref in
transport_lun_remove_cmd() where ->lun_ref could end up being
put more than once per command via different target completion
and fabric release contexts.
It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that
percpu_ref_put() is only ever called once per se_cmd.
This bug was manifesting itself as a LUN shutdown regression
bug in >= v3.13 code, where percpu_ref_kill() would end up
hanging indefinately due to the incorrect percpu_ref count.
(Change se_cmd->lun_ref_active from bool -> int to force at
least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang)
Reported-by: Tommy Apel <tommyapeldk@gmail.com>
Cc: Tommy Apel <tommyapeldk@gmail.com>
Cc: <stable@vger.kernel.org> #3.13+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
When creating network portals rapidly, such as when restoring a
configuration, LIO's code to reuse existing portals can return a false
negative if the thread hasn't run yet and set np_thread_state to
ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack
when attempting to bind to the same address/port.
This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list,
so even if the thread hasn't run yet, iscsit_get_np will return the
existing np.
Also, convert np_lock -> np_mutex + hold across adding new net portal
to g_np_list to prevent a race where two threads may attempt to create
the same network portal, resulting in one of them failing.
(nab: Add missing mutex_unlocks in iscsit_add_np failure paths)
(DanC: Fix incorrect spin_unlock -> spin_unlock_bh)
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: <stable@vger.kernel.org> #3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
When we plug a 3-ring headset on the Dell machine (Vendor ID:
0x10ec0255, Subsystem ID: 0x1028064d), the headset mic can't be
detected, after apply this patch, the headset mic can work well.
BugLink: https://bugs.launchpad.net/bugs/1260303
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Doro Wu <fan-cheng.wu@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This completes the hardware support for the Asus Xonar DG/DGX cards,
and makes them actually usable.
This is v4 of Roman's patch set with some small formatting changes.
LTO requires consistent types of symbols over all files.
So "nmi" cannot be declared as a char [] here, need to use the
correct function type.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-8-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
These functions are called from inline assembler stubs, thus
need to be global and visible.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-7-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LTO in gcc 4.6/47. has trouble with global register variables. They were used
to read the stack pointer. Use a simple inline assembler statement with
a mov instead.
This also helps LLVM/clang, which does not support global register
variables.
[ hpa: Ideally this should become a builtin in both gcc and clang. ]
v2: More general asm constraint. Fix description (Jan Beulich)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-6-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The paravirt thunks use a hack of using a static reference to a static
function to reference that function from the top level statement.
This assumes that gcc always generates static function names in a specific
format, which is not necessarily true.
Simply make these functions global and asmlinkage or __visible. This way the
static __used variables are not needed and everything works.
Functions with arguments are __visible to keep the register calling
convention on 32bit.
Changed in paravirt and in all users (Xen and vsmp)
v2: Use __visible for functions with arguments
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ido Yariv <ido@wizery.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The paravirt patching code assumes that it can reference a
local assembler label between two different top level assembler
statements. This does not work with LTO
where the assembler code may end up in different assembler files.
Replace it with extern / global /asm linkage labels.
This also removes one redundant copy of the macro.
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
- Make the C code used by the paravirt stubs visible
- Since they have to be global now, give them a more unique
name.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1382458079-24450-3-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull drm updates from Dave Airlie:
"Been a bit busy, first week of kids school, and waiting on other trees
to go in before I could send this, so its a bit later than I'd
normally like.
Highlights:
- core:
timestamp fixes, lots of misc cleanups
- new drivers:
bochs virtual vga
- vmwgfx:
major overhaul for their nextgen virt gpu.
- i915:
runtime D3 on HSW, watermark fixes, power well work, fbc fixes,
bdw is no longer prelim.
- nouveau:
gk110/208 acceleration, more pm groundwork, old overlay support
- radeon:
dpm rework and clockgating for CIK, pci config reset, big endian
fixes
- tegra:
panel support and DSI support, build as module, prime.
- armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast:
fixes
- msm:
hdmi support for mdp5"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits)
drm/nouveau: resume display if any later suspend bits fail
drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip
drm/nouveau: implement hooks for needed for drm vblank timestamping support
drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping
drm/nv50: fill in crtc mode struct members from crtc_mode_fixup
drm/radeon/dce8: workaround for atom BlankCrtc table
drm/radeon/DCE4+: clear bios scratch dpms bit (v2)
drm/radeon: set si_notify_smc_display_change properly
drm/radeon: fix DAC interrupt handling on DCE5+
drm/radeon: clean up active vram sizing
drm/radeon: skip async dma init on r6xx
drm/radeon/runpm: don't runtime suspend non-PX cards
drm/radeon: add ring to fence trace functions
drm/radeon: add missing trace point
drm/radeon: fix VMID use tracking
drm: ast,cirrus,mgag200: use drm_can_sleep
drm/gma500: Lock struct_mutex around cursor updates
drm/i915: Fix the offset issue for the stolen GEM objects
DRM: armada: fix missing DRM_KMS_FB_HELPER select
drm/i915: Decouple GPU error reporting from ring initialisation
...
Pull slave-dma updates from Vinod Koul:
- new driver for BCM2835 used in R-pi
- new driver for MOXA ART
- dma_get_any_slave_channel API for DT based systems
- minor fixes and updates spread acrooss driver
[ The fsl-ssi dual fifo mode support addition clashed badly with the
other changes to fsl-ssi that came in through the sound merge. I did
a very rough cut at fixing up the conflict, but Nicolin Chen (author
of both sides) will need to verify and check things ]
* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
dmaengine: mmp_pdma: fix mismerge
dma: pl08x: Export pl08x_filter_id
acpi-dma: align documentation with kernel-doc format
dma: fix vchan_cookie_complete() debug print
DMA: dmatest: extend the "device" module parameter to 32 characters
drivers/dma: fix error return code
dma: omap: Set debug level to debugging messages
dmaengine: fix kernel-doc style typos for few comments
dma: tegra: add support for Tegra148/124
dma: dw: use %pad instead of casting dma_addr_t
dma: dw: join split up messages
dma: dw: fix style of multiline comment
dmaengine: k3dma: fix sparse warnings
dma: pl330: Use dma_get_slave_channel() in the of xlate callback
dma: pl330: Differentiate between submitted and issued descriptors
dmaengine: sirf: Add device_slave_caps interface
DMA: Freescale: change BWC from 256 bytes to 1024 bytes
dmaengine: Add MOXA ART DMA engine driver
dmaengine: Add DMA_PRIVATE to BCM2835 driver
dma: imx-sdma: Assign a default script number for ROM firmware cases
...
* Use deferred probing on Chrome OS platforms for the i2c
device registration. This fixes a long-standing race of initialization
of touchpad/screen on Chromebooks.
* Added in platform device registration for pstore console on supported hardware
* Misc smaller fixes (__initdata, module exit cleanup, etc)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=nO2m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform
Pull chrome platform cleanups and improvements from Olof Johansson:
- Use deferred probing on Chrome OS platforms for the i2c device
registration. This fixes a long-standing race of initialization of
touchpad/screen on Chromebooks.
- Added in platform device registration for pstore console on supported
hardware
- Misc smaller fixes (__initdata, module exit cleanup, etc)
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
platform/chrome: unregister platform driver/device when module exit
platform/chrome: Make i2c_adapter_names static
platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag
platform/chrome: chromeos_laptop - Use deferred probing
platform/chrome: chromeos_laptop - Restructure device associations
platform/chrome: Add pstore platform_device
A few patches have been queued up for this merge window:
* Improvements for the ARM-SMMU driver
(IOMMU_EXEC support, IOMMU group support)
* Updates and fixes for the shmobile IOMMU driver
* Various fixes to generic IOMMU code and the
Intel IOMMU driver
* Some cleanups in IOMMU drivers (dev_is_pci() usage)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJS6XrCAAoJECvwRC2XARrjgy4P/itemtg2U+603Ldje8WcPo0E
OCO/0VVSmCTYKUJDZY0hiVwqmhe5gFL3Hm/gGwkS0+UJenFXMmi+aVaPp4pCpgH+
dL2HD3dIEvi14bisrdxG/8MdR6mIx0qzKtnZLkKSR4LXwucyLHvC/DaCoOytb7Yk
7s+eEuo0hj0jAkiqSG/zLEtKElTEnoAAkLOjMy46orecJ5q4HusPZekLtWZs2ETe
x3NS63Unb9g1iSQJWIA7HnQlxWIr2+iynoamHHJRiVFzqRF0W0sGvQY3auG0DSCn
70WRNE1rKfEkfXMJxosRQ4394YUQdAkt8MBENNcJcC6E1n5PBi0cEZXH6mCnEIlG
jXzIKUY9fz68ZboaqIxXv4Hb+JLlPXCvPBvQzIQiKRgVxd8nncEjn5I9MHdf+je5
BmJlzJLJvP4cFvW8Hc8k2Oq101b1kEcSCLARWWvE9/bk9xIUyrqBkR4XjC0vb6qq
1HbKVdZ7KFKCkBHy9xMpr7CUjKiDiiLeUmqlhyjcK9spicuNIZQnC11HemL6/USP
oR6Ext9RGhvz+ch656+5+L6f6FURVP8/ywKiJ3RjmvXV5/fCYo3WMitOB2qzlWCy
SYXAczAOMOdOo+1Dxbghrr+7HzUWPqgfPmntZEPGMZhfuZ6xXr+7pGLjAhHb4vcR
SZxqkDo1cprqrR9KFAWC
=YKLk
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU Updates from Joerg Roedel:
"A few patches have been queued up for this merge window:
- improvements for the ARM-SMMU driver (IOMMU_EXEC support, IOMMU
group support)
- updates and fixes for the shmobile IOMMU driver
- various fixes to generic IOMMU code and the Intel IOMMU driver
- some cleanups in IOMMU drivers (dev_is_pci() usage)"
* tag 'iommu-updates-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits)
iommu/vt-d: Fix signedness bug in alloc_irte()
iommu/vt-d: free all resources if failed to initialize DMARs
iommu/vt-d, trivial: clean sparse warnings
iommu/vt-d: fix wrong return value of dmar_table_init()
iommu/vt-d: release invalidation queue when destroying IOMMU unit
iommu/vt-d: fix access after free issue in function free_dmar_iommu()
iommu/vt-d: keep shared resources when failed to initialize iommu devices
iommu/vt-d: fix invalid memory access when freeing DMAR irq
iommu/vt-d, trivial: simplify code with existing macros
iommu/vt-d, trivial: use defined macro instead of hardcoding
iommu/vt-d: mark internal functions as static
iommu/vt-d, trivial: clean up unused code
iommu/vt-d, trivial: check suitable flag in function detect_intel_iommu()
iommu/vt-d, trivial: print correct domain id of static identity domain
iommu/vt-d, trivial: refine support of 64bit guest address
iommu/vt-d: fix resource leakage on error recovery path in iommu_init_domains()
iommu/vt-d: fix a race window in allocating domain ID for virtual machines
iommu/vt-d: fix PCI device reference leakage on error recovery path
drm/msm: Fix link error with !MSM_IOMMU
iommu/vt-d: use dedicated bitmap to track remapping entry allocation status
...
Pull more i2c updates from Wolfram Sang:
"Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal
applied"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: fix NACK error code
i2c: update i2c_algorithm documentation
i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted
i2c: rcar: do not print error if device nacks transfer
i2c: rely on driver core when sanitizing devices
i2c: delete non-required instances of include <linux/init.h>
i2c: acorn: is tristate and should use module.h
i2c: piix4: Standardize log messages
i2c: piix4: Use different message for AMD Auxiliary SMBus Controller
i2c: piix4: Add support for AMD ML and CZ SMBus changes
Pull hwmon updates from Jean Delvare:
"This include it87 driver improvements, and a tree-wide change of my
e-mail address"
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
Update Jean Delvare's e-mail address
hwmon: (it87) Print proper names for the IT8771E and IT8772E
hwmon: (it87) Add support for the ITE IT8603E
Pull x86 platform drivers update from Matthew Garrett:
"Nothing amazingly special here. Some cleanups, a new driver to
support a single button on some new HPs, a tiny amount of hardware
enablement"
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
ipc: add intel-mid's pci id macros
hp-wireless: new driver for hp wireless button for Windows 8
toshiba_acpi: Support RFKILL hotkey scancode
hp_accel: Add a new PnP ID HPQ6007 for new HP laptops
sony-laptop: remove unnecessary assigment of len
fujitsu-laptop: fix error return code
dell-laptop: Only install the i8042 filter when rfkill is active
X86 platform: New BayTrail IOSF-SB MBI driver
drivers: platform: Include appropriate header file in mxm-wmi.c
drivers: platform: Mark functions as static in hp_accel.c
dell-laptop: rkill whitelist Precision models
ipc: simplify platform data approach
asus-wmi: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_hwmon_device_register_with_groups
compal-laptop: Replace SENSOR_DEVICE_ATTR with DEVICE_ATTR
eeepc-laptop: Convert to use devm_hwmon_device_register_with_groups
compal-laptop: Use devm_kzalloc to allocate local data structure
dell-laptop: fix to return error code in dell_send_intensity()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=gvaS
-----END PGP SIGNATURE-----
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux
Pull blackfin updates from Steven Miao:
"Some minor changes and bug fixes"
* tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
From: Eunbong Song <eunb.song@samsung.com>
Add platfrom device resource for bfin-sport on bf533 stamp
fix build error for bf527-ezkit_defconfig for old silicon
blackfin: Support L1 SRAM parity checking feature on bf60x
blackfin: bf609: update the anomaly list to Nov 2013
blackfin: delete non-required instances of <linux/init.h>
From: Paul Walmsley <pwalmsley@nvidia.com>
06/18] smp, blackfin: kill SMP single function call interrupt
arch: blackfin: uapi: be sure of "_UAPI" prefix for all guard macros
Pull intel MID cleanups from Peter Anvin:
"Miscellaneous cleanups to the intel-mid code merged earlier in this
merge window"
* 'x86-intel-mid-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, intel-mid: Cleanup some platform code's header files
x86, intel-mid: Add missing 'void' to functions without arguments
x86: Don't add new __cpuinit users to Merrifield platform code
x86: Don't introduce more __cpuinit users in intel_mid_weak_decls.h
Minchan Kim
Roman Gushchin
Christoph Hellwig
Levente Kurusa
Yinghai Lu
Linus Torvalds
Geert Uytterhoeven
Peter Rosin
David Woodhouse
Nicolas Pitre
Julien Grall
Ian Campbell
Nicholas Bellinger
Andy Grover
Hui Wang
Takashi Iwai
Andi Kleen