Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was to needed for a couple of months in 2010, until UFS
quota support got dropped. Since then it's equivalent to
simple_setattr() (i.e. the default) for everything except the
regular files. And dropping it there allows to convert all
UFS symlinks to {page,simple}_symlink_inode_operations, getting
rid of fs/ufs/symlink.c completely.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It is closely tied to block pointers handling there, can benefit
from existing helpers, etc. - no point keeping them apart.
Trimmed the trailing whitespaces in inode.c at the same time.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There were 3 remaining users; in two of them we took ->s_lock immediately
after lock_ufs() and held it until just before unlock_ufs(); the third
one (statfs) could not be called from itself or from other two (remount
and sync_fs). Just use ->s_lock in statfs and don't bother with lock_ufs
at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* stores to block pointers are under per-inode seqlock (meta_lock) and
mutex (truncate_mutex)
* fetches of block pointers are either under truncate_mutex, or wrapped
into seqretry loop on meta_lock
* all changes of ->i_size are under truncate_mutex and i_mutex
* all changes of ->i_lastfrag are under truncate_mutex
It's similar to what ext2 is doing; the main difference is that unlike
ext2 we can't rely upon the atomicity of stores into block pointers -
on UFS2 they are 64bit. So we can't cut the corner when switching
a pointer from NULL to non-NULL as we could in ext2_splice_branch()
and need to use meta_lock on all modifications.
We use seqlock where ext2 uses rwlock; ext2 could probably also benefit
from such change...
Another non-trivial difference is that with UFS we *cannot* have reader
grab truncate_mutex in case of race - it has to keep retrying. That
might be possible to change, but not until we lift tail unpacking
several levels up in call chain.
After that commit we do *NOT* hold fs-wide serialization on accesses
to block pointers anymore. Moreover, lock_ufs() can become a normal
mutex now - it's only used on statfs, remount and sync_fs and none
of those uses are recursive. As the matter of fact, *now* it can be
collapsed with ->s_lock, and be eventually replaced with saner
per-cylinder-group spinlocks, but that's a separate story.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
See "ext2: Do not update mtime of a moved directory" (and followup in
"ext2: fix unbalanced kmap()/kunmap()") for background; this is UFS
equivalent - the same problem exists here.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 0244756edc ("ufs: sb mutex merge + mutex_destroy") generated
deadlocks in read/write mode on mkdir.
This patch partially reverts it keeping fixes by Andrew Morton and
mutex_destroy()
[AV: fixed a missing bit in ufs_remount()]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Reported-by: Ian Campbell <ian.campbell@citrix.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: Roger Pau Monne <roger.pau@citrix.com>
Cc: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert no level printk to pr_debug in UFSD. DEBUG is defined with
CONFIG_UFS_DEBUG so pr_debug are emitted here.
Also fixing call to UFSD (add;)
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace UFS-fs, UFS-fs: and UFS: by pr_fmt with module name "ufs: "
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 788257d610 ("ufs: remove the BKL") replaced BKL with mutex
protection using functions lock_ufs, unlock_ufs and struct mutex 'mutex'
in sb_info.
Commit b6963327e0 ("ufs: drop lock/unlock super") removed lock/unlock
super and added struct mutex 's_lock' in sb_info.
Those 2 mutexes are generally locked/unlocked at the same time except in
allocation (balloc, ialloc).
This patch merges the 2 mutexes and propagates first commit solution.
It also adds mutex destruction before kfree during ufs_fill_super
failure and ufs_put_super.
[akpm@linux-foundation.org: avoid ifdefs, return -EROFS not -EINVAL]
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: "Chen, Jet" <jet.chen@intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removed lock/unlock super. Added a new private s_lock mutex.
Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch makes UFS stop using the VFS '->write_super()' method along with
the 's_dirt' superblock flag, because they are on their way out.
The way we implement this is that we schedule a delay job instead relying on
's_dirt' and '->write_super()'.
The whole "superblock write-out" VFS infrastructure is served by the
'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and
writes out all dirty superblocks using the '->write_super()' call-back. But the
problem with this thread is that it wastes power by waking up the system every
5 seconds, even if there are no diry superblocks, or there are no client
file-systems which would need this (e.g., btrfs does not use
'->write_super()'). So we want to kill it completely and thus, we need to make
file-systems to stop using the '->write_super()' VFS service, and then remove
it together with the kernel thread.
Tested using fsstress from the LTP project.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This introduces a new per-superblock mutex in UFS to replace
the big kernel lock. I have been careful to avoid nested
calls to lock_ufs and to get the lock order right with
respect to other mutexes, in particular lock_super.
I did not make any attempt to prove that the big kernel
lock is not needed in a particular place in the code,
which is very possible.
The mutex has a significant performance impact, so it is only
used on SMP or PREEMPT configurations.
As Nick Piggin noticed, any allocation inside of the lock
may end up deadlocking when we get to ufs_getfrag_block
in the reclaim task, so we now use GFP_NOFS.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Nick Piggin <npiggin@gmail.com>
generic setattr not longer responsible for quota transfer.
use ufs_setattr for all ufs's inodes.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ufs2 fast symlinks can be twice as long as ufs ones, however the code
was using the ufs size in various places. Fix that so ufs2 symlinks over
60 characters aren't truncated.
Note that we copy the entire area instead of using the maxsymlinklen field
from the superblock. This way we will be more robust against corruption (of
the superblock).
While we are at it, use memcpy instead of open-coding it with for loops.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stop the UFS filesystem from using iget() and read_inode(). Replace
ufs_read_inode() with ufs_iget(), and call that instead of iget(). ufs_iget()
then uses iget_locked() directly and returns a proper error code instead of an
inode in the event of an error.
ufs_fill_super() returns any error incurred when getting the root inode
instead of EINVAL.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move prototypes and in-core structures to fs/ufs/ similar to what most
other filesystems already do.
I made little modifications: move also ufs debug macros and
mount options constants into fs/ufs/ufs.h, this stuff
also private for ufs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Kroah-Hartman
Al Viro
Fabian Frederick
Marco Stornelli
Artem Bityutskiy
Joe Perches
Arnd Bergmann
Dmitry Monakhov
Christoph Hellwig
Alexey Dobriyan
Duane Griffin
Harvey Harrison
David Howells