Граф коммитов

2138 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds b71acb0e37 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Add 1472-byte test to tcrypt for IPsec
   - Reintroduced crypto stats interface with numerous changes
   - Support incremental algorithm dumps

  Algorithms:
   - Add xchacha12/20
   - Add nhpoly1305
   - Add adiantum
   - Add streebog hash
   - Mark cts(cbc(aes)) as FIPS allowed

  Drivers:
   - Improve performance of arm64/chacha20
   - Improve performance of x86/chacha20
   - Add NEON-accelerated nhpoly1305
   - Add SSE2 accelerated nhpoly1305
   - Add AVX2 accelerated nhpoly1305
   - Add support for 192/256-bit keys in gcmaes AVX
   - Add SG support in gcmaes AVX
   - ESN for inline IPsec tx in chcr
   - Add support for CryptoCell 703 in ccree
   - Add support for CryptoCell 713 in ccree
   - Add SM4 support in ccree
   - Add SM3 support in ccree
   - Add support for chacha20 in caam/qi2
   - Add support for chacha20 + poly1305 in caam/jr
   - Add support for chacha20 + poly1305 in caam/qi2
   - Add AEAD cipher support in cavium/nitrox"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits)
  crypto: skcipher - remove remnants of internal IV generators
  crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS
  crypto: salsa20-generic - don't unnecessarily use atomic walk
  crypto: skcipher - add might_sleep() to skcipher_walk_virt()
  crypto: x86/chacha - avoid sleeping under kernel_fpu_begin()
  crypto: cavium/nitrox - Added AEAD cipher support
  crypto: mxc-scc - fix build warnings on ARM64
  crypto: api - document missing stats member
  crypto: user - remove unused dump functions
  crypto: chelsio - Fix wrong error counter increments
  crypto: chelsio - Reset counters on cxgb4 Detach
  crypto: chelsio - Handle PCI shutdown event
  crypto: chelsio - cleanup:send addr as value in function argument
  crypto: chelsio - Use same value for both channel in single WR
  crypto: chelsio - Swap location of AAD and IV sent in WR
  crypto: chelsio - remove set but not used variable 'kctx_len'
  crypto: ux500 - Use proper enum in hash_set_dma_transfer
  crypto: ux500 - Use proper enum in cryp_set_dma_transfer
  crypto: aesni - Add scatter/gather avx stubs, and use them in C
  crypto: aesni - Introduce partial block macro
  ..
2018-12-27 13:53:32 -08:00
David S. Miller 2be09de7d6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20 11:53:36 -08:00
David S. Miller 5a862f86b8 This time we have too many changes to list, highlights:
* virt_wifi - wireless control simulation on top of
    another network interface
  * hwsim configurability to test capabilities similar
    to real hardware
  * various mesh improvements
  * various radiotap vendor data fixes in mac80211
  * finally the nl_set_extack_cookie_u64() we talked
    about previously, used for
  * peer measurement APIs, right now only with FTM
    (flight time measurement) for location
  * made nl80211 radio/interface announcements more complete
  * various new HE (802.11ax) things:
    updates, TWT support, ...
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAlwaCwkACgkQB8qZga/f
 l8S7mA/+I1CJmGC7Pvy+SBFkzoY5zEjjzgZYL6sGo16qMs89NPcURSe5j+uCsDP3
 nKEjsvhQMYDfGNLTJJfWbDpGwm9LnKp69AFITlvfzmP6Sm36QMZr7oIC4abi8cW4
 osaO3qfdaNoZ//x72jgjrFhUAnphvT2BsRVMNEjz7sXcDd7Jm9NnpRhV8zgXFvLF
 dS2Ng51LM/BLMz5jQpyJUDZeeL/iBYybCecyckmVqzXPh1icIZETSqZXiN4ngv2A
 6p9BSGNtP6wmjnbkvZz5RDq76VhTPZWsTgTpVb45Wf1k2fm1rB96UgpqvfQtjTgB
 +7Zx2WRpMXM5OjGkwaEs8nawFmt7MHCGnhLPLWPCbXc685fhp3OFShysMJdYS/GZ
 IIRJ7+IchAQX1yluftB+NkQM9sBDjyseMBwxHRYkj/rQVhoLY1sT+ke7lkuV10o6
 DQqfpUTZAsIz7zkuscn7hkNdI/Rjub6BZjbrs1Jt9zSt9WQUBao23XudOI0j5JDa
 ErnfC5PISXMQWik5B9M1Zhq3H9qCI2Swh19lMmtxtSDQ9yrLrJkEJ5SA+aHoxNHj
 wSxBc3XXSW47qPXGX/D5DNnbOcOrE7kVZuD8YqRsy8VedyjIgEw7oQ21flAD4FC4
 R4TgbNkqpfZQsU29gaMkDkYXnfQDB/G9FOk6ARGxjBPjT55Hz0E=
 =EpyK
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2018-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
This time we have too many changes to list, highlights:
 * virt_wifi - wireless control simulation on top of
   another network interface
 * hwsim configurability to test capabilities similar
   to real hardware
 * various mesh improvements
 * various radiotap vendor data fixes in mac80211
 * finally the nl_set_extack_cookie_u64() we talked
   about previously, used for
 * peer measurement APIs, right now only with FTM
   (flight time measurement) for location
 * made nl80211 radio/interface announcements more complete
 * various new HE (802.11ax) things:
   updates, TWT support, ...
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19 08:36:18 -08:00
Johannes Berg 93bc8ac49e cfg80211: fix ieee80211_get_vht_max_nss()
Fix two bugs in ieee80211_get_vht_max_nss():
 * the spec says we should round down
   (reported by Nissim)
 * there's a double condition, the first one is wrong,
   supp_width == 0 / ext_nss_bw == 2 is valid in 80+80
   (found by smatch)

Fixes: b0aa75f0b1 ("ieee80211: add new VHT capability fields/parsing")
Reported-by: Nissim Bendanan <nissimx.bendanan@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19 09:41:10 +01:00
Johannes Berg d350a0f431 nl80211: fix memory leak if validate_pae_over_nl80211() fails
If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(),
we might leak the 'connkeys' allocation. Fix this.

Fixes: 64bf3d4bc2 ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19 09:40:17 +01:00
Sriram R 30c63115e2 nl80211: Add support to notify radar event info received from STA
Currently radar detection and corresponding channel switch is handled
at the AP device. STA ignores these detected radar events since the
radar signal can be seen mostly by the AP as well. But in scenarios where
a radar signal is seen only at STA, notifying this event to the AP which
can trigger a channel switch can be useful.
Stations can report such radar events autonomously through Spectrum
management (Measurement Report) action frame to its AP. The userspace on
processing the report can notify the kernel with the use of the added
NL80211_CMD_NOTIFY_RADAR to indicate the detected event and inturn adding
the reported channel to NOL.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:13:05 +01:00
Luca Coelho 925b5978cd cfg80211: add some missing fall through annotations
There are talks about enabling -Wimplicit-fallthrough warnings in the
mainline and it is already enabled in linux-next.  Add all the
missing annotations to prevent warnings when this happens.

And in one case, remove the extra text from the annotation so that the
compiler recognizes it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:15:08 +01:00
Jouni Malinen 312ca38ddd cfg80211: Fix busy loop regression in ieee80211_ie_split_ric()
This function was modified to support the information element extension
case (WLAN_EID_EXTENSION) in a manner that would result in an infinite
loop when going through set of IEs that include WLAN_EID_RIC_DATA and
contain an IE that is in the after_ric array. The only place where this
can currently happen is in mac80211 ieee80211_send_assoc() where
ieee80211_ie_split_ric() is called with after_ric[].

This can be triggered by valid data from user space nl80211
association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The
only known application having an option to include WLAN_EID_RIC_DATA in
these requests is wpa_supplicant and it had a bug that prevented this
specific contents from being used (and because of that, not triggering
this kernel bug in an automated test case ap_ft_ric) and now that this
bug is fixed, it has a workaround to avoid this kernel issue.
WLAN_EID_RIC_DATA is currently used only for testing purposes, so this
does not cause significant harm for production use cases.

Fixes: 2512b1b18d ("mac80211: extend ieee80211_ie_split to support EXTENSION")
Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-05 12:51:29 +01:00
Eric Biggers 1ad0f1603a crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm allocations
'cipher' algorithms (single block ciphers) are always synchronous, so
passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
effect.  Many users therefore already don't pass it, but some still do.
This inconsistency can cause confusion, especially since the way the
'mask' argument works is somewhat counterintuitive.

Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:55 +08:00
Bob Copeland ecbc12ad6b {nl,mac}80211: add rssi to mesh candidates
When peering is in userspace, some implementations may want to control
which peers are accepted based on RSSI in addition to the information
elements being sent today.  Add signal level so that info is available
to clients.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:41:20 +01:00
Bob Copeland 01d66fbd5b {nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconf
When userspace is controlling mesh routing, it may have better
knowledge about whether a mesh STA is connected to a mesh
gate than the kernel mpath table.  Add dot11MeshConnectedToMeshGate
to the mesh config so that such applications can explicitly
signal that a mesh STA is connected to a gate, which will then
be advertised in the beacon.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:39:44 +01:00
Bob Copeland dbdaee7aa6 {nl,mac}80211: report gate connectivity in station info
Capture the current state of gate connectivity from the mesh
formation field in mesh config whenever we receive a beacon,
and report that via GET_STATION.  This allows applications
doing mesh peering in userspace to make peering decisions
based on peers' current upstream connectivity.

Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:38:29 +01:00
Andrew Zaborowski 3d1a5bbfaf nl80211: Emit a SET_INTERFACE on iftype change
Let userspace learn about iftype changes by sending a notification
when handling the NL80211_CMD_SET_INTERFACE command.  There seems
to be no other place where the iftype can change: nl80211_set_interface
is the only caller of cfg80211_change_iface which is the only caller of
ops->change_virtual_intf.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:22:10 +01:00
Martin Willi c90b670b5c nl80211: announce radios/interfaces when switching namespaces
When a wiphy changes its namespace, all interfaces are moved to the
new namespace as well. The network interfaces are properly announced
as leaving on the old and as appearing on the new namespace through
RTM_NEWLINK/RTM_DELLINK. On nl80211, however, these events are missing
for radios and their interfaces.

Add netlink announcements through nl80211 when switching namespaces,
so userspace can rely on these events to discover radios properly.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:21:10 +01:00
Johannes Berg 9bb7e0f24e cfg80211: add peer measurement with FTM initiator API
Add a new "peer measurement" API, that can be used to measure
certain things related to a peer. Right now, only implement
FTM (flight time measurement) over it, but the idea is that
it'll be extensible to also support measuring the necessary
things to calculate e.g. angle-of-arrival for WiGig.

The API is structured to have a generic list of peers and
channels to measure with/on, and then for each of those a
set of measurements (again, only FTM right now) to perform.

Results are sent to the requesting socket, including a final
complete message.

Closing the controlling netlink socket will abort a running
measurement.

v3:
 - add a bit to report "final" for partial results
 - remove list keeping etc. and just unicast out the results
   to the requester (big code reduction ...)
 - also send complete message unicast, and as a result
   remove the multicast group
 - separate out struct cfg80211_pmsr_ftm_request_peer
   from struct cfg80211_pmsr_request_peer
 - document timeout == 0 if no timeout
 - disallow setting timeout nl80211 attribute to 0,
   must not include attribute for no timeout
 - make MAC address randomization optional
 - change num bursts exponent default to 0 (1 burst, rather
   rather than the old default of 15==don't care)

v4:
 - clarify NL80211_ATTR_TIMEOUT documentation

v5:
 - remove unnecessary nl80211 multicast/family changes
 - remove partial results bit/flag, final is sufficient
 - add max_bursts_exponent, max_ftms_per_burst to capability
 - rename "frames per burst" -> "FTMs per burst"

v6:
 - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down()
   and call it in leave, so the device can't go down with any
   pending measurements

v7:
 - wording fixes (Lior)
 - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior)

v8:
 - copyright statements
 - minor coding style fixes
 - fix error path leak

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:20:13 +01:00
Johannes Berg aaaa10e01d cfg80211: tracing: avoid 'idx' variable
This variable shadows something that gets generated inside
the tracing macros, which causes sparse to warn. Avoid it
so sparse output is more readable, even if it doesn't seem
to cause any trouble.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 11:10:47 +01:00
Sriram R 113f3aaa81 cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces
Currently when an AP and STA interfaces are active in the same or different
radios, regulatory settings are restored whenever the STA disconnects. This
restores all channel information including dfs states in all radios.
For example, if an AP interface is active in one radio and STA in another,
when radar is detected on the AP interface, the dfs state of the channel
will be changed to UNAVAILABLE. But when the STA interface disconnects,
this issues a regulatory disconnect hint which restores all regulatory
settings in all the radios attached and thereby losing the stored dfs
state on the other radio where the channel was marked as unavailable
earlier. Hence prevent such regulatory restore whenever another active
beaconing interface is present in the same or other radios.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 09:11:47 +01:00
Johannes Berg c177db2d0d cfg80211/mac80211: fix FTM settings across CSA
When FTM is enabled, doing a CSA will unexpectedly lose it since
the value of ftm_responder may be initialized to 0 instead of -1,
so fix that.

Fixes: 81e54d08d9 ("cfg80211: support FTM responder configuration/statistics")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 08:56:58 +01:00
Sergey Matyukevich 81c5dce2cd cfg80211: add missing constraint for user-supplied VHT mask
Do a logical vht_capa &= vht_capa_mask of user-supplied VHT mask with
the driver-supplied mask of modifiable VHT capabilities.
Fix whitespaces and comment typos.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09 08:55:32 +01:00
Ankita Bajaj 0d4e14a32d nl80211: Add per peer statistics to compute FCS error rate
Add support for drivers to report the total number of MPDUs received
and the number of MPDUs received with an FCS error from a specific
peer. These counters will be incremented only when the TA of the
frame matches the MAC address of the peer irrespective of FCS
error.

It should be noted that the TA field in the frame might be corrupted
when there is an FCS error and TA matching logic would fail in such
cases. Hence, FCS error counter might not be fully accurate, but it can
provide help in detecting bad RX links in significant number of cases.
This FCS error counter without full accuracy can be used, e.g., to
trigger a kick-out of a connected client with a bad link in AP mode to
force such a client to roam to another AP.

Signed-off-by: Ankita Bajaj <bankita@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-12 12:56:34 +02:00
Johannes Berg 3d7af87835 nl80211: use netlink policy validation function for elements
Instead of open-coding a lot of calls to is_valid_ie_attr(),
add this validation directly to the policy, now that we can.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11 16:00:59 +02:00
Johannes Berg ab0d76f682 nl80211: use policy range validation where applicable
Many range checks can be done in the policy, move them
there. A few in mesh are added in the code (taken out of
the macros) because they don't fit into the s16 range in
the policy validation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-11 16:00:58 +02:00
Johannes Berg b802a5d6f3 lib80211: don't use skcipher
Using skcipher just makes the code longer, and mac80211
also "open-codes" the WEP encrypt/decrypt.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-10 14:44:16 +02:00
Johannes Berg 188de5dd80 Merge remote-tracking branch 'net-next/master' into mac80211-next
Merge net-next, which pulled in net, so I can merge a few more
patches that would otherwise conflict.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-08 09:48:36 +02:00
David S. Miller 72438f8cef Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-10-06 14:43:42 -07:00
David S. Miller 6f41617bf2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net'
overlapped the renaming of a netlink attribute in net-next.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03 21:00:17 -07:00
Johannes Berg 5207ca554b cfg80211: sort tracing properly
There were supposed to be two blocks - one for each direction
cfg80211 <-> driver, clean up the code to restore that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:59:07 +02:00
Johannes Berg ec8f170bc3 cfg80211: unify sending NL80211_CMD_NEW_INTERFACE
There isn't really any need for us to be sending this from
two different places - move cfg80211_init_wdev() later and
send the notification from there, removing it from the non-
netdev case.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:58:57 +02:00
Johannes Berg 85dd3da43d cfg80211: combine wdev/netdev unregister code
We currently have two places that do similar things, depending
on whether it's a wdev with or without netdev.

Combine the code to avoid having to duplicate all new additions.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:58:51 +02:00
Johannes Berg 49f9cf0e1b nl80211: add error messages to nl80211_parse_chandef()
Add some error messages to nl80211_parse_chandef() to make
failures here - especially with disabled channels - easier
to diagnose.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:58:44 +02:00
Johannes Berg b60ad34851 cfg80211: move cookie_counter out of wiphy
There's no reason for drivers to be able to access the
cfg80211 internal cookie counter; move it out of the
wiphy into the rdev structure.

While at it, also make it never assign 0 as a cookie
(we consider that invalid in some places), and warn if
we manage to do that for some reason (wrapping is not
likely to happen with a u64.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:58:36 +02:00
Johannes Berg 71e5e88680 cfg80211: regulatory: make initialization more robust
Since my change to split out the regulatory init to occur later,
any issues during earlier cfg80211_init() or errors during the
platform device allocation would lead to crashes later. Make this
more robust by checking that the earlier initialization succeeded.

Fixes: d7be102f29 ("cfg80211: initialize regulatory keys/database later")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:58:25 +02:00
Johannes Berg 5297c65c1d nl80211: remove nl80211_prepare_wdev_dump() skb argument
nl80211_prepare_wdev_dump() is using the output skb to look up
the network namespace, but this isn't really necessary, it can
just as well use the input skb which is available as cb->skb,
the sk is the same anyway.

Therefore, remove the redundant argument.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:30 +02:00
Pradeep Kumar Chitrapu 81e54d08d9 cfg80211: support FTM responder configuration/statistics
Allow userspace to enable fine timing measurement responder
functionality with configurable lci/civic parameters in AP mode.
This can be done at AP start or changing beacon parameters.

A new EXT_FEATURE flag is introduced for drivers to advertise
the capability.

Also nl80211 API support for retrieving statistics is added.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
[remove unused cfg80211_ftm_responder_params, clarify docs,
 move validation into policy]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:30 +02:00
Johannes Berg 7057f2496c cfg80211: tracing: reuse wiphy_wdev_evt for rdev_get_txq_stats
A simple cleanup, reuse the event definition that we already have.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:30 +02:00
Andrew Zaborowski efdfce7270 nl80211: Fix a GET_KEY reply attribute
Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:30 +02:00
Johannes Berg e4d4216e91 cfg80211: combine duplicate wdev init code
There's a bit of duplicated code to initialize a wdev, pull it out
into a separate function to call from both places.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:29 +02:00
Colin Ian King 6762696429 cfg80211: remove redundant check of !scan_plan
The check for !scan_plan is redunant as this has been checked
in the proceeding statement and the code returns -ENOBUFS if
it is true. Remove the redundant check.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:29 +02:00
zhong jiang d25d062f55 cfg80211: remove unnecessary null pointer check in cfg80211_netdev_notifier_call
The iterator in list_for_each_entry_safe is never null, therefore, remove
the redundant null pointer check.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02 09:56:29 +02:00
Yu Zhao 1db5852945 cfg80211: fix use-after-free in reg_process_hint()
reg_process_hint_country_ie() can free regulatory_request and return
REG_REQ_ALREADY_SET. We shouldn't use regulatory_request after it's
called. KASAN error was observed when this happens.

BUG: KASAN: use-after-free in reg_process_hint+0x839/0x8aa [cfg80211]
Read of size 4 at addr ffff8800c430d434 by task kworker/1:3/89
<snipped>
Workqueue: events reg_todo [cfg80211]
Call Trace:
 dump_stack+0xc1/0x10c
 ? _atomic_dec_and_lock+0x1ad/0x1ad
 ? _raw_spin_lock_irqsave+0xa0/0xd2
 print_address_description+0x86/0x26f
 ? reg_process_hint+0x839/0x8aa [cfg80211]
 kasan_report+0x241/0x29b
 reg_process_hint+0x839/0x8aa [cfg80211]
 reg_todo+0x204/0x5b9 [cfg80211]
 process_one_work+0x55f/0x8d0
 ? worker_detach_from_pool+0x1b5/0x1b5
 ? _raw_spin_unlock_irq+0x65/0xdd
 ? _raw_spin_unlock_irqrestore+0xf3/0xf3
 worker_thread+0x5dd/0x841
 ? kthread_parkme+0x1d/0x1d
 kthread+0x270/0x285
 ? pr_cont_work+0xe3/0xe3
 ? rcu_read_unlock_sched_notrace+0xca/0xca
 ret_from_fork+0x22/0x40

Allocated by task 2718:
 set_track+0x63/0xfa
 __kmalloc+0x119/0x1ac
 regulatory_hint_country_ie+0x38/0x329 [cfg80211]
 __cfg80211_connect_result+0x854/0xadd [cfg80211]
 cfg80211_rx_assoc_resp+0x3bc/0x4f0 [cfg80211]
smsc95xx v1.0.6
 ieee80211_sta_rx_queued_mgmt+0x1803/0x7ed5 [mac80211]
 ieee80211_iface_work+0x411/0x696 [mac80211]
 process_one_work+0x55f/0x8d0
 worker_thread+0x5dd/0x841
 kthread+0x270/0x285
 ret_from_fork+0x22/0x40

Freed by task 89:
 set_track+0x63/0xfa
 kasan_slab_free+0x6a/0x87
 kfree+0xdc/0x470
 reg_process_hint+0x31e/0x8aa [cfg80211]
 reg_todo+0x204/0x5b9 [cfg80211]
 process_one_work+0x55f/0x8d0
 worker_thread+0x5dd/0x841
 kthread+0x270/0x285
 ret_from_fork+0x22/0x40
<snipped>

Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-01 09:14:03 +02:00
Stefan Seyfried 848e616e66 cfg80211: fix wext-compat memory leak
cfg80211_wext_giwrate and sinfo.pertid might allocate sinfo.pertid via
rdev_get_station(), but never release it. Fix that.

Fixes: 8689c051a2 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
[johannes: fix error path, use cfg80211_sinfo_release_content(), add Fixes]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-01 09:11:36 +02:00
Masashi Honma 1222a16014 nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds
Use array_index_nospec() to sanitize i with respect to speculation.

Note that the user doesn't control i directly, but can make it out
of bounds by not finding a threshold in the array.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[add note about user control, as explained by Masashi]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-27 11:44:44 +02:00
Masashi Honma 30fe6d50eb nl80211: Fix possible Spectre-v1 for NL80211_TXRATE_HT
Use array_index_nospec() to sanitize ridx with respect to speculation.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-26 11:17:32 +02:00
Jouni Malinen 119f94a6fe cfg80211: Address some corner cases in scan result channel updating
cfg80211_get_bss_channel() is used to update the RX channel based on the
available frame payload information (channel number from DSSS Parameter
Set element or HT Operation element). This is needed on 2.4 GHz channels
where frames may be received on neighboring channels due to overlapping
frequency range.

This might of some use on the 5 GHz band in some corner cases, but
things are more complex there since there is no n:1 or 1:n mapping
between channel numbers and frequencies due to multiple different
starting frequencies in different operating classes. This could result
in ieee80211_channel_to_frequency() returning incorrect frequency and
ieee80211_get_channel() returning incorrect channel information (or
indication of no match). In the previous implementation, this could
result in some scan results being dropped completely, e.g., for the 4.9
GHz channels. That prevented connection to such BSSs.

Fix this by using the driver-provided channel pointer if
ieee80211_get_channel() does not find matching channel data for the
channel number in the frame payload and if the scan is done with 5 MHz
or 10 MHz channel bandwidth. While doing this, also add comments
describing what the function is trying to achieve to make it easier to
understand what happens here and why.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-10 09:13:09 +02:00
Stanislaw Gruszka 014f5a250f cfg80211: validate wmm rule when setting
Add validation check for wmm rule when copy rules from fwdb and print
error when rule is invalid.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05 10:16:59 +02:00
Andrei Otcheretianski 24f33e64fc cfg80211: reg: Init wiphy_idx in regulatory_hint_core()
Core regulatory hints didn't set wiphy_idx to WIPHY_IDX_INVALID. Since
the regulatory request is zeroed, wiphy_idx was always implicitly set to
0. This resulted in updating only phy #0.
Fix that.

Fixes: 806a9e3967 ("cfg80211: make regulatory_request use wiphy_idx instead of wiphy")
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[add fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05 10:07:53 +02:00
Johannes Berg b0aa75f0b1 ieee80211: add new VHT capability fields/parsing
IEEE 802.11-2016 extended the VHT capability fields to allow
indicating the number of spatial streams depending on the
actually used bandwidth, add support for decoding this.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05 10:03:14 +02:00
Shaul Triebitz 244eb9ae79 cfg80211: add he_capabilities (ext) IE to AP settings
Same as for HT and VHT.
This helps the lower level to know whether the AP supports HE.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-09-05 10:03:13 +02:00
David S. Miller 36302685f5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2018-09-04 21:33:03 -07:00
David S. Miller fc3e3bf55f Here are quite a large number of fixes, notably:
* various A-MSDU building fixes (currently only affects mt76)
  * syzkaller & spectre fixes in hwsim
  * TXQ vs. teardown fix that was causing crashes
  * embed WMM info in reg rule, bad code here had been causing crashes
  * one compilation issue with fix from Arnd (rfkill-gpio includes)
  * fixes for a race and bad data during/after channel switch
  * nl80211: a validation fix, attribute type & unit fixes
 along with other small fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH1e1rEeCd0AIMq6MB8qZga/fl8QFAluNJXcACgkQB8qZga/f
 l8Qvfw//dBwlhMII862Evk4M8OzhdHfkJ4Kp/d2C476whbEySU/jRIIeetmVpXYV
 5cfStTxBpGkwMj5PXy3DaA2PO++L5qaApDJfHc8DNWNmvt9rRRJul1zP05HjZRxW
 G7aFCFRWVK0dlmVP9GC/b20KyUvz4OpklBnxylkIrx0FCkw5bAHs1SsjGZCg/6Tm
 008DAhFz3Ds6hNLxwricvrk5oQ6eC1cDfDd4Rtk3jCYQ4t7KFn5gFoKzKldfLdWe
 TFTpVQ26XAGzn9QVXzAiXN4ZNpUpZrFXosC7cn5Ugiyic4YtnHxS2wVDuL3vs1cL
 J2hoW6wjEBg+U6vmHMcijo1lnQwW7ueYUDWLJPNIXHA6A7sGyA6z6D7vbbvHfoG6
 L681BrYmTmKkXXquu5+r85/9WgP2cmzbRpoIxTQl3sU2Liw2k5IJ9ryLLyul+8z7
 spnDPOY7h4c0JrAvhjHkrKIbbW4FKYunxZJ8dn9eyAzOd/58iKoXzu4yAggwm+0V
 DtZiu0gSr52sKrh1vqEyfhrPFCN1Mc19DRsJBtabUfVEveQTwToCkbZ5s1sLqSId
 m30XUjjYOiRk7MZnncar0lE4//eJ6bnL3Wie3UTmO3xsMwlgKQPqjI4TprNogUCk
 R2dVeGmhm3HSriRHKJL3/D8uzw5mMBI3Kicw9tFSSyVjtJgxvpg=
 =lLBA
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-for-davem-2018-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Here are quite a large number of fixes, notably:
 * various A-MSDU building fixes (currently only affects mt76)
 * syzkaller & spectre fixes in hwsim
 * TXQ vs. teardown fix that was causing crashes
 * embed WMM info in reg rule, bad code here had been causing crashes
 * one compilation issue with fix from Arnd (rfkill-gpio includes)
 * fixes for a race and bad data during/after channel switch
 * nl80211: a validation fix, attribute type & unit fixes
along with other small fixes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03 22:12:02 -07:00