Граф коммитов

2103 Коммитов

Автор SHA1 Сообщение Дата
Hiroaki SHIMODA 914bec1011 bql: Avoid possible inconsistent calculation.
dql->num_queued could change while processing dql_completed().
To provide consistent calculation, added an on stack variable.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31 18:18:17 -04:00
Hiroaki SHIMODA 25426b794e bql: Avoid unneeded limit decrement.
When below pattern is observed,

                                               TIME
       dql_queued()         dql_completed()     |
      a) initial state                          |
                                                |
      b) X bytes queued                         V

      c) Y bytes queued
                           d) X bytes completed
      e) Z bytes queued
                           f) Y bytes completed

a) dql->limit has already some value and there is no in-flight packet.
b) X bytes queued.
c) Y bytes queued and excess limit.
d) X bytes completed and dql->prev_ovlimit is set and also
   dql->prev_num_queued is set Y.
e) Z bytes queued.
f) Y bytes completed. inprogress and prev_inprogress are true.

At f), according to the comment, all_prev_completed becomes
true and limit should be increased. But POSDIFF() ignores
(completed == dql->prev_num_queued) case, so limit is decreased.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Denys Fedoryshchenko <denys@visp.net.lb>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31 18:18:16 -04:00
Hiroaki SHIMODA 0cfd32b736 bql: Fix POSDIFF() to integer overflow aware.
POSDIFF() fails to take into account integer overflow case.

Signed-off-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Denys Fedoryshchenko <denys@visp.net.lb>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31 18:18:16 -04:00
Linus Torvalds 2f83766d4b IOMMU Updates for Linux 3.5
Not much stuff this time. The only change to the IOMMU core code is the
 addition of a handle to the fault handling code. A few updates to the
 AMD IOMMU driver to work around new errata. The other patches are mostly
 fixes and enhancements to the existing ARM IOMMU drivers and
 documentation updates.
 
 A new IOMMU driver for the Exynos platform was also underway but got
 merged via the Samsung tree and is not part of this tree.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPxfseAAoJECvwRC2XARrjvL4QAL39988y7ajHSI3ym3Dxovn9
 w8md63xKNlTpCB8NJPRIJpcGrE7QFtNXPFCagTqO713ulwCoKayEwKGOU7VQagFc
 0/JoHxE5usE5OuA6tyAJbpWK10kWKDzu6HjZfqF2yoa0q/REbsu65KsY7zc7HbpF
 qEAXX1xr9IC7GUM7gv75OR8CP2VJCW3+6VyhiD/37t3KpNwINMpRDO/eN/KiwoUI
 1t+/DVwO6pH5UrGReWrmjs/gcxFMzkeelt+iCA32kzkWLtyWjeWBujVWnFvVtpkz
 R4pV2T2jvs6fWPU5MMBXZRd5AvLLqcu/g/Yr21WYHz07jCcGxlCUp9qpnGLt2el0
 /YTY3LBZUQJ5sx3OSJV+oQVTtI5x0EkAiOrJ8Dx20wNAFqun9bhJb1WX0IXflmZc
 oC7SF5wjXq8pUQmX/wpGMbW7XYompypJGqlEsftJEytf4dfR6KJ2Vo1h3pHtpaex
 IaY6TqmdW44e0EgbFTM7RMNFtC7GrIY9NE+WKlrFtsHhUFrqt1NVBEcO3faU0ES6
 UAguFRPM/HAdkVmY620+DUT/JkEMemWq2jgWExLGLC9gI8L1Xj2cdU8esstuMUoV
 GGG4u9a5W1rALwg+zPCQGoVxPKmd6fpeC3U+Rmg2639chy+h4c/cBXkzfUsxe2lg
 wvMDVbjDN1Fz0c29YJit
 =K23I
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Not much stuff this time.  The only change to the IOMMU core code is
  the addition of a handle to the fault handling code.  A few updates to
  the AMD IOMMU driver to work around new errata.  The other patches are
  mostly fixes and enhancements to the existing ARM IOMMU drivers and
  documentation updates.

  A new IOMMU driver for the Exynos platform was also underway but got
  merged via the Samsung tree and is not part of this tree."

* tag 'iommu-updates-v3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  Documentation: kernel-parameters.txt Add amd_iommu_dump
  iommu/core: pass a user-provided token to fault handlers
  iommu/tegra: gart: Fix register offset correctly
  iommu: OMAP: device detach on domain destroy
  iommu: tegra/gart: Add device tree support
  iommu: tegra/gart: use correct gart_device
  iommu/tegra: smmu: Print device name correctly
  iommu/amd: Add workaround for event log erratum
  iommu/amd: Check for the right TLP prefix bit
  dma-debug: release free_entries_lock before saving stack trace
2012-05-30 08:49:28 -07:00
Joerg Roedel 28f8571e1e Merge branches 'iommu/fixes', 'dma-debug', 'arm/omap', 'arm/tegra', 'core' and 'x86/amd' into next 2012-05-30 12:41:29 +02:00
Pierre Carrier 7c20342230 lib/vsprintf.c: "%#o",0 becomes '0' instead of '00'
number()'s behaviour is slighly changed: 0 becomes "0" instead of "00"
when using the flag SPECIAL and base 8.

Before:
Number\Format  %o    %#o  %x    %#x
            0     0   00    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10

After:
Number\Format  %o    %#o  %x    %#x
            0     0    0    0   0x0
            1     1   01    1   0x1
           16    20  020   10  0x10

Signed-off-by: Pierre Carrier <pierre@spotify.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:33 -07:00
Nick Piggin 5536805292 radix-tree: fix preload vector size
We are not preallocating a sufficient number of nodes.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:33 -07:00
Stephen Boyd fd0a37355c spinlock_debug: print kallsyms name for lock
When a spinlock warning is printed we usually get

 BUG: spinlock bad magic on CPU#0, modprobe/111
  lock: 0xdff09f38, .magic: 00000000, .owner: /0, .owner_cpu: 0

but it's nicer to print the symbol for the lock if we have it so that we
can avoid 'grep dff09f38 /proc/kallsyms' to find out which lock it was.
Use kallsyms to print the symbol name so we get something a bit easier to
read

 BUG: spinlock bad magic on CPU#0, modprobe/112
  lock: test_lock, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0

If the lock is not in kallsyms %ps will fall back to printing the address
directly.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:33 -07:00
Stephen Boyd 4796dd200d vsprintf: fix %ps on non symbols when using kallsyms
Using %ps in a printk format will sometimes fail silently and print the
empty string if the address passed in does not match a symbol that
kallsyms knows about.  But using %pS will fall back to printing the full
address if kallsyms can't find the symbol.  Make %ps act the same as %pS
by falling back to printing the address.

While we're here also make %ps print the module that a symbol comes from
so that it matches what %pS already does.  Take this simple function for
example (in a module):

	static void test_printk(void)
	{
		int test;
		pr_info("with pS: %pS\n", &test);
		pr_info("with ps: %ps\n", &test);
	}

Before this patch:

 with pS: 0xdff7df44
 with ps:

After this patch:

 with pS: 0xdff7df44
 with ps: 0xdff7df44

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Andrew Morton 05a6c8a922 lib/bitmap.c: fix documentation for scnprintf() functions
The code comments for bscnl_emit() and bitmap_scnlistprintf() are
describing snprintf() return semantics, but these functions use
scnprintf() return semantics.  Fix that, and document the
bitmap_scnprintf() return value as well.

Cc: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Andrew Morton 68aecfb979 lib/string_helpers.c: make arrays static
Moving these arrays into static storage shrinks the kernel a bit:

   text    data     bss     dec     hex filename
    723     112      64     899     383 lib/string_helpers.o
    516     272      64     852     354 lib/string_helpers.o

Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Uwe Kleine-König 26d7b99b83 lib/test-kstrtox.c: mark const init data with __initconst instead of __initdata
As long as there is no other non-const variable marked __initdata in the
same compilation unit it doesn't hurt.  If there were one however
compilation would fail with

	error: $variablename causes a section type conflict

because a section containing const variables is marked read only and so
cannot contain non-const variables.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Chris Metcalf 17a801f4bf list_debug: WARN for adding something already in the list
We were bitten by this at one point and added an additional sanity test
for DEBUG_LIST.  You can't validly add a list_head to a list where either
prev or next is the same as the thing you're adding.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:32 -07:00
Bjorn Helgaas 3af684c7c5 swiotlb: print physical addresses consistently with other parts of kernel
Print swiotlb info in a style consistent with the %pR style used elsewhere
in the kernel.  For example:

    -Placing 64MB software IO TLB between ffff88007a662000 - ffff88007e662000
    -software IO TLB at phys 0x7a662000 - 0x7e662000
    +software IO TLB [mem 0x7a662000-0x7e661fff] (64MB) mapped at [ffff88007a662000-ffff88007e661fff]

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:21 -07:00
Jim Kukunas 2aa4ee2a88 lib/raid6: fix sparse warnings in recovery functions
Make the recovery functions static to fix the following sparse warnings:

lib/raid6/recov.c:25:6: warning: symbol 'raid6_2data_recov_intx1' was
not declared. Should it be static?
lib/raid6/recov.c:69:6: warning: symbol 'raid6_datap_recov_intx1' was
not declared. Should it be static?
lib/raid6/recov_ssse3.c:22:6: warning: symbol 'raid6_2data_recov_ssse3'
was not declared. Should it be static?
lib/raid6/recov_ssse3.c:197:6: warning: symbol 'raid6_datap_recov_ssse3'
was not declared. Should it be static?

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-28 14:10:22 +10:00
Paul Mackerras 69ea640598 lib: Fix generic strnlen_user for 32-bit big-endian machines
The aligned_byte_mask() definition is wrong for 32-bit big-endian
machines: the "7-(n)" part of the definition assumes a long is 8
bytes.  This fixes it by using BITS_PER_LONG - 8 instead of 8*7.
Tested on 32-bit and 64-bit PowerPC.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-27 20:59:46 -07:00
Linus Torvalds 1e2aec873a Merge branch 'generic-string-functions'
This makes <asm/word-at-a-time.h> actually live up to its promise of
allowing architectures to help tune the string functions that do their
work a word at a time.

David had already taken the x86 strncpy_from_user() function, modified
it to work on sparc, and then done the extra work to make it generically
useful.  This then expands on that work by making x86 use that generic
version, completing the circle.

But more importantly, it fixes up the word-at-a-time interfaces so that
it's now easy to also support things like strnlen_user(), and pretty
much most random string functions.

David reports that it all works fine on sparc, and Jonas Bonn reported
that an earlier version of this worked on OpenRISC too.  It's pretty
easy for architectures to add support for this and just replace their
private versions with the generic code.

* generic-string-functions:
  sparc: use the new generic strnlen_user() function
  x86: use the new generic strnlen_user() function
  lib: add generic strnlen_user() function
  word-at-a-time: make the interfaces truly generic
  x86: use generic strncpy_from_user routine
2012-05-26 16:57:16 -07:00
Linus Torvalds 39b6cc668c arm-soc: add stmp-dev library code
A number of devices are using a common register layout, this adds support
 code for it in lib/stmp_device.c so we do not need to duplicate it in
 each driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuexlAAoJEIwa5zzehBx31P0P/jK7GC5Ln2gr/bV+4Kt9fStS
 VcGI/ARsyQtwaNTJQfPkg8Weg3DhbPRlUWeimVKMFo3uEle3VjnPBjdcMPUKtW3x
 SPka/W591LGEdKQRmXZrISm2OiQXVvM2zkhSJV89n/tJBdHd+tDWDDq4Y784F8Cj
 hWmcIi66G4RBPj5pplf80UhNAEg5HoZHQnlgrS1iLMpBTwXAesv7zyZpvnsMzdpg
 qSJTfcifgLULtM0WFbooNGojBn8ftuA67psrw78vgV2bz7bVBioZHYFyqPWK9Gr0
 vtiKuyXqiDA65mueXA+E5RXXLCLQSyGdV8y0xiSYjilRVkziPcMKnQT07keb8SJN
 CCDpetjEULiQpgKvVWc7sDGlb5ePd/C5rs31S0fFOKjeRJNlfG5+OuqZPiobO7hk
 F2Fx3gq4LPLel7gwjK3T4XTmmL9kNt/y1sIfXx5WybJL8N5n6TdZIfWm6yOZYwfX
 jvG/CnvVvhgdWk/ebaTEOG1MaeNAY3uwGpSBuEEoXUDHatQdOYAsgLfJJv/H4zKp
 2AY9qvXTDtFYys/hs2WhwmS7s1WFlIrA+voEPBDa3WT2qGup8HAL/C9kL3ms2zqk
 8JL/yQ/IJpTHPb4bCGo9C08qdi1YtMbylHB0/ELvG1BNoHOnCDV3wZlVG3ZTQQb5
 c/Lb2H8crk5HVbpCPLQU
 =VHLM
 -----END PGP SIGNATURE-----

Merge tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc stmp-dev library code from Olof Johansson:
 "A number of devices are using a common register layout, this adds
  support code for it in lib/stmp_device.c so we do not need to
  duplicate it in each driver."

Fix up trivial conflicts in drivers/i2c/busses/i2c-mxs.c and
lib/Makefile

* tag 'stmp-dev' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  i2c: mxs: use global reset function
  lib: add support for stmp-style devices
2012-05-26 12:50:04 -07:00
Linus Torvalds a08c5356a3 lib: add generic strnlen_user() function
This adds a new generic optimized strnlen_user() function that uses the
<asm/word-at-a-time.h> infrastructure to portably do efficient string
handling.

In many ways, strnlen is much simpler than strncpy, and in particular we
can always pre-align the words we load from memory.  That means that all
the worries about alignment etc are a non-issue, so this one can easily
be used on any architecture.  You obviously do have to do the
appropriate word-at-a-time.h macros.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26 11:33:53 -07:00
Linus Torvalds 36126f8f2e word-at-a-time: make the interfaces truly generic
This changes the interfaces in <asm/word-at-a-time.h> to be a bit more
complicated, but a lot more generic.

In particular, it allows us to really do the operations efficiently on
both little-endian and big-endian machines, pretty much regardless of
machine details.  For example, if you can rely on a fast population
count instruction on your architecture, this will allow you to make your
optimized <asm/word-at-a-time.h> file with that.

NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is
not truly generic, it actually only works on big-endian.  Why? Because
on little-endian the generic algorithms are wasteful, since you can
inevitably do better. The x86 implementation is an example of that.

(The only truly non-generic part of the asm-generic implementation is
the "find_zero()" function, and you could make a little-endian version
of it.  And if the Kbuild infrastructure allowed us to pick a particular
header file, that would be lovely)

The <asm/word-at-a-time.h> functions are as follows:

 - WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm
   uses.

 - has_zero(): take a word, and determine if it has a zero byte in it.
   It gets the word, the pointer to the constant pool, and a pointer to
   an intermediate "data" field it can set.

   This is the "quick-and-dirty" zero tester: it's what is run inside
   the hot loops.

 - "prep_zero_mask()": take the word, the data that has_zero() produced,
   and the constant pool, and generate an *exact* mask of which byte had
   the first zero.  This is run directly *outside* the loop, and allows
   the "has_zero()" function to answer the "is there a zero byte"
   question without necessarily getting exactly *which* byte is the
   first one to contain a zero.

   If you do multiple byte lookups concurrently (eg "hash_name()", which
   looks for both NUL and '/' bytes), after you've done the prep_zero_mask()
   phase, the result of those can be or'ed together to get the "either
   or" case.

 - The result from "prep_zero_mask()" can then be fed into "find_zero()"
   (to find the byte offset of the first byte that was zero) or into
   "zero_bytemask()" (to find the bytemask of the bytes preceding the
   zero byte).

   The existence of zero_bytemask() is optional, and is not necessary
   for the normal string routines.  But dentry name hashing needs it, so
   if you enable DENTRY_WORD_AT_A_TIME you need to expose it.

This changes the generic strncpy_from_user() function and the dentry
hashing functions to use these modified word-at-a-time interfaces.  This
gets us back to the optimized state of the x86 strncpy that we lost in
the previous commit when moving over to the generic version.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-26 11:33:40 -07:00
Dmitry Kasatkin 7cf4206a99 Remove unused code from MPI library
MPI library is used by RSA verification implementation.
Few files contains functions which are never called.

James Morris has asked to remove all of them.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Requested-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-26 11:51:03 +10:00
Dmitry Kasatkin 9e235dcaf4 Revert "crypto: GnuPG based MPI lib - additional sources (part 4)"
This reverts commit 7e8dec918e.

RSA verification implementation does not use this code.
James Morris has asked to remove that.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Requested-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-05-26 11:50:44 +10:00
Linus Torvalds ce004178be Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc changes from David S. Miller:
 "This has the generic strncpy_from_user() implementation architectures
  can now use, which we've been developing on linux-arch over the past
  few days.

  For good measure I ran both a 32-bit and a 64-bit glibc testsuite run,
  and the latter of which pointed out an adjustment I needed to make to
  sparc's user_addr_max() definition.  Linus, you were right, STACK_TOP
  was not the right thing to use, even on sparc itself :-)

  From Sam Ravnborg, we have a conversion of sparc32 over to the common
  alloc_thread_info_node(), since the aspect which originally blocked
  our doing so (sun4c) has been removed."

Fix up trivial arch/sparc/Kconfig and lib/Makefile conflicts.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix user_addr_max() definition.
  lib: Sparc's strncpy_from_user is generic enough, move under lib/
  kernel: Move REPEAT_BYTE definition into linux/kernel.h
  sparc: Increase portability of strncpy_from_user() implementation.
  sparc: Optimize strncpy_from_user() zero byte search.
  sparc: Add full proper error handling to strncpy_from_user().
  sparc32: use the common implementation of alloc_thread_info_node()
2012-05-24 15:10:28 -07:00
David S. Miller 2922585b93 lib: Sparc's strncpy_from_user is generic enough, move under lib/
To use this, an architecture simply needs to:

1) Provide a user_addr_max() implementation via asm/uaccess.h

2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig

3) Remove the existing strncpy_from_user() implementation and symbol
   exports their architecture had.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
2012-05-24 13:12:28 -07:00
Linus Torvalds c80ddb5263 md updates for 3.5
Main features:
  - RAID10 arrays can be reshapes - adding and removing devices and
    changing chunks (not 'far' array though)
  - allow RAID5 arrays to be reshaped with a backup file (not tested
    yet, but the priciple works fine for RAID10).
  - arrays can be reshaped while a bitmap is present - you no longer
    need to remove it first
  - SSSE3 support for RAID6 syndrome calculations
 
 and of course a number of minor fixes etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iQIVAwUAT7xXijnsnt1WYoG5AQLvFg/+OGeptY2cRu3HpsNsibvIyfiOYSlDpLo+
 2tYzBz2wFiFROfj41aV/PdeqE3xn/RelDmIgt9Apaimeg453O6IdjI9X00fPrgxV
 ATWkwWy5ykozbLIsyJYQ/kLPo0NX2KR/TtEim2lwlEjs4bLsF8TGvRa6ylcko0zI
 j6cbqVzkCDHXzLk/M6l0UoUaSG1PcjO6M10KBM7bS2sLoxhkn69gT7YTIlFySXW4
 epNYSTKyeuSmEUI7L09s5HLf/zPZSp4MipoRIqQYcwk5gvmMNNuLbouDECvZ5BdV
 TXxrVVSlh7tFSeoGwYXQXcv/nFg3n53Mc+Nimzo7hhmI5ytRR9Y0c6SwvRBCN7t6
 HzapQu+vBqDIPzedH+6r/gk39Auzm60JjGDYHiSdjZCAWefcYUmYm/Iso9JJ/0hg
 PVkSfnkgaFUx0GhXS+C9YgPHYlb5DnTCCMrbtQCL65D61D2det3oZtrQPfKIKMlw
 SRz2Ls+4o4UhAY7JLYNhONa0mtxhk5VTZ3LH58I9+ZurVyvqrjvCV+neSiCUsRog
 jT038/gT5nJ8HPsg5feQ9cS0TbEo92eg3gILy1D5cPTaMZhrV8gq0Ke7xgmBo0+Q
 bWh4vxU9SM/96c/umCxcmHymKAFhsMVFbJTg4r9K5atFGNyMegJYedFFEEbQMQI3
 u+KRDXHN700=
 =q8bc
 -----END PGP SIGNATURE-----

Merge tag 'md-3.5' of git://neil.brown.name/md

Pull md updates from NeilBrown:
 "It's been a busy cycle for md - lots of fun stuff here..  if you like
  this kind of thing :-)

  Main features:
   - RAID10 arrays can be reshaped - adding and removing devices and
     changing chunks (not 'far' array though)
   - allow RAID5 arrays to be reshaped with a backup file (not tested
     yet, but the priciple works fine for RAID10).
   - arrays can be reshaped while a bitmap is present - you no longer
     need to remove it first
   - SSSE3 support for RAID6 syndrome calculations

  and of course a number of minor fixes etc."

* tag 'md-3.5' of git://neil.brown.name/md: (56 commits)
  md/bitmap: record the space available for the bitmap in the superblock.
  md/raid10: Remove extras after reshape to smaller number of devices.
  md/raid5: improve removal of extra devices after reshape.
  md: check the return of mddev_find()
  MD RAID1: Further conditionalize 'fullsync'
  DM RAID: Use md_error() in place of simply setting Faulty bit
  DM RAID: Record and handle missing devices
  DM RAID: Set recovery flags on resume
  md/raid5: Allow reshape while a bitmap is present.
  md/raid10: resize bitmap when required during reshape.
  md: allow array to be resized while bitmap is present.
  md/bitmap: make sure reshape request are reflected in superblock.
  md/bitmap: add bitmap_resize function to allow bitmap resizing.
  md/bitmap: use DIV_ROUND_UP instead of open-code
  md/bitmap: create a 'struct bitmap_counts' substructure of 'struct bitmap'
  md/bitmap: make bitmap bitops atomic.
  md/bitmap: make _page_attr bitops atomic.
  md/bitmap: merge bitmap_file_unmap and bitmap_file_put.
  md/bitmap: remove async freeing of bitmap file.
  md/bitmap: convert some spin_lock_irqsave to spin_lock_irq
  ...
2012-05-23 17:08:40 -07:00
Linus Torvalds 19bec32d7f Merge branches 'x86-asm-for-linus', 'x86-cleanups-for-linus', 'x86-cpu-for-linus', 'x86-debug-for-linus' and 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull initial trivial x86 stuff from Ingo Molnar.

Various random cleanups and trivial fixes.

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Eliminate dead ia32 syscall handlers

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pci-calgary_64.c: Remove obsoleted simple_strtoul() usage
  x86: Don't continue booting if we can't load the specified initrd
  x86: kernel/dumpstack.c simple_strtoul cleanup
  x86: kernel/check.c simple_strtoul cleanup
  debug: Add CONFIG_READABLE_ASM
  x86: spinlock.h: Remove REG_PTR_MODE

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cache_info: Fix setup of l2/l3 ids

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Avoid double stack traces with show_regs()

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: microcode_core.c simple_strtoul cleanup
2012-05-23 10:09:50 -07:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Linus Torvalds 5d4e2d08e7 Driver core pull for 3.5-rc1
Here's the driver core, and other driver subsystems, pull request for
 the 3.5-rc1 merge window.
 
 Outside of a few minor driver core changes, we ended up with the
 following different subsystem and core changes as well, due to
 interdependancies on the driver core:
  - hyperv driver updates
  - drivers/memory being created and some drivers moved into it
  - extcon driver subsystem created out of the old Android staging switch
    driver code
  - dynamic debug updates
  - printk rework, and /dev/kmsg changes
 
 All of this has been tested in the linux-next releases for a few weeks
 with no reported problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7q28ACgkQMUfUDdst+ykXmwCfcPASzC+/bDkuqdWsqzxlWZ7+
 VOQAnAriySv397St36J6Hz5bMQZwB1Yq
 =SQc+
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg Kroah-Hartman:
 "Here's the driver core, and other driver subsystems, pull request for
  the 3.5-rc1 merge window.

  Outside of a few minor driver core changes, we ended up with the
  following different subsystem and core changes as well, due to
  interdependancies on the driver core:
   - hyperv driver updates
   - drivers/memory being created and some drivers moved into it
   - extcon driver subsystem created out of the old Android staging
     switch driver code
   - dynamic debug updates
   - printk rework, and /dev/kmsg changes

  All of this has been tested in the linux-next releases for a few weeks
  with no reported problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fix up conflicts in drivers/extcon/extcon-max8997.c where git noticed
that a patch to the deleted drivers/misc/max8997-muic.c driver needs to
be applied to this one.

* tag 'driver-core-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (90 commits)
  uio_pdrv_genirq: get irq through platform resource if not set otherwise
  memory: tegra{20,30}-mc: Remove empty *_remove()
  printk() - isolate KERN_CONT users from ordinary complete lines
  sysfs: get rid of some lockdep false positives
  Drivers: hv: util: Properly handle version negotiations.
  Drivers: hv: Get rid of an unnecessary check in vmbus_prep_negotiate_resp()
  memory: tegra{20,30}-mc: Use dev_err_ratelimited()
  driver core: Add dev_*_ratelimited() family
  Driver Core: don't oops with unregistered driver in driver_find_device()
  printk() - restore prefix/timestamp printing for multi-newline strings
  printk: add stub for prepend_timestamp()
  ARM: tegra30: Make MC optional in Kconfig
  ARM: tegra20: Make MC optional in Kconfig
  ARM: tegra30: MC: Remove unnecessary BUG*()
  ARM: tegra20: MC: Remove unnecessary BUG*()
  printk: correctly align __log_buf
  ARM: tegra30: Add Tegra Memory Controller(MC) driver
  ARM: tegra20: Add Tegra Memory Controller(MC) driver
  printk() - restore timestamp printing at console output
  printk() - do not merge continuation lines of different threads
  ...
2012-05-22 16:02:13 -07:00
Jim Kukunas 96e67703e7 lib/raid6: cleanup gen_syndrome function selection
Reorders functions in raid6_algos as well as the preference check
to reduce the number of functions tested on initialization.

Also, creates symmetry between choosing the gen_syndrome functions
and choosing the recovery functions.

Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:24 +10:00
Jim Kukunas 2dbf708448 lib/raid6: update test program for recovery functions
Test each combination of recovery and syndrome generation
functions.

Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:23 +10:00
Jim Kukunas 048a8b8c89 lib/raid6: Add SSSE3 optimized recovery functions
Add SSSE3 optimized recovery functions, as well as a system
for selecting the most appropriate recovery functions to use.

Originally-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:18 +10:00
Jim Kukunas f674ef7b43 lib/raid6: fix test program build
<linux/module.h> drags in headers which are not visible to userspace,
thus breaking the build for the test program.

Signed-off-by: Jim Kukunas <james.t.kukunas@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2012-05-22 13:54:16 +10:00
Linus Torvalds 226da0dbc8 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU changes from Ingo Molnar:
 "This is the v3.5 RCU tree from Paul E.  McKenney:

 1) A set of improvements and fixes to the RCU_FAST_NO_HZ feature (with
    more on the way for 3.6).  Posted to LKML:
       https://lkml.org/lkml/2012/4/23/324 (commits 1-3 and 5),
       https://lkml.org/lkml/2012/4/16/611 (commit 4),
       https://lkml.org/lkml/2012/4/30/390 (commit 6), and
       https://lkml.org/lkml/2012/5/4/410 (commit 7, combined with
       the other commits for the convenience of the tester).

 2) Changes to make rcu_barrier() avoid disrupting execution of CPUs
    that have no RCU callbacks.  Posted to LKML:
       https://lkml.org/lkml/2012/4/23/322.

 3) A couple of commits that improve the efficiency of the interaction
    between preemptible RCU and the scheduler, these two being all that
    survived an abortive attempt to allow preemptible RCU's
    __rcu_read_lock() to be inlined.  The full set was posted to LKML at
    https://lkml.org/lkml/2012/4/14/143, and the first and third patches
    of that set remain.

 4) Lai Jiangshan's algorithmic implementation of SRCU, which includes
    call_srcu() and srcu_barrier().  A major feature of this new
    implementation is that synchronize_srcu() no longer disturbs the
    execution of other CPUs.  This work is based on earlier
    implementations by Peter Zijlstra and Paul E.  McKenney.  Posted to
    LKML: https://lkml.org/lkml/2012/2/22/82.

 5) A number of miscellaneous bug fixes and improvements which were
    posted to LKML at: https://lkml.org/lkml/2012/4/23/353 with
    subsequent updates posted to LKML."

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  rcu: Make rcu_barrier() less disruptive
  rcu: Explicitly initialize RCU_FAST_NO_HZ per-CPU variables
  rcu: Make RCU_FAST_NO_HZ handle timer migration
  rcu: Update RCU maintainership
  rcu: Make exit_rcu() more precise and consolidate
  rcu: Move PREEMPT_RCU preemption to switch_to() invocation
  rcu: Ensure that RCU_FAST_NO_HZ timers expire on correct CPU
  rcu: Add rcutorture test for call_srcu()
  rcu: Implement per-domain single-threaded call_srcu() state machine
  rcu: Use single value to handle expedited SRCU grace periods
  rcu: Improve srcu_readers_active_idx()'s cache locality
  rcu: Remove unused srcu_barrier()
  rcu: Implement a variant of Peter's SRCU algorithm
  rcu: Improve SRCU's wait_idx() comments
  rcu: Flip ->completed only once per SRCU grace period
  rcu: Increment upper bit only for srcu_read_lock()
  rcu: Remove fast check path from __synchronize_srcu()
  rcu: Direct algorithmic SRCU implementation
  rcu: Introduce rcutorture testing for rcu_barrier()
  timer: Fix mod_timer_pinned() header comment
  ...
2012-05-21 19:26:51 -07:00
Linus Torvalds 513de477a0 Merge branch 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core/debugobjects changes from Ingo Molnar:
 "Not much happened: it includes a cleanup and an irq latency reduction
  fixlet."

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Fill_pool() returns void now
  debugobjects: printk with irqs enabled
  debugobjects: Remove unused return value from fill_pool()
2012-05-21 19:22:55 -07:00
Oskar Schirmer 6684b5729d lib: Change mail address of Oskar Schirmer
That old mail address doesnt exist any more.
This changes all occurences to my new address.

Signed-off-by: Oskar Schirmer <oskar@scara.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-17 15:18:37 +02:00
Kay Sievers 649e6ee33f printk() - restore timestamp printing at console output
The output of the timestamps got lost with the conversion of the
kmsg buffer to records; restore the old behavior.

Document, that CONFIG_PRINTK_TIME now only controls the output of
the timestamps in the syslog() system call and on the console, and
not the recording of the timestamps.

Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Reported-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-09 20:35:06 -07:00
Zhi Yong Wu 9ff1f838e9 kobject: fix the uncorrect comment
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 16:51:19 -07:00
Greg Kroah-Hartman fef15d2f3d Revert "dynamic_debug: remove unneeded includes"
This reverts commit 04db6e5fdd.

Odds are, we really don't want to revert all of these, and need to be
more careful in the future to make sure we don't break the build of
other arches.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-07 16:47:32 -07:00
Kyle McMartin 2a01bb3885 panic: Make panic_on_oops configurable
Several distros set this by default by patching panic_on_oops.
It seems to fit with the BOOTPARAM_{HARD,SOFT}_PANIC options
though, so let's add a Kconfig entry and reduce some more
upstream delta.

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120411121529.GH26688@redacted.bos.redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-07 14:45:29 +02:00
Jim Cromie 04db6e5fdd dynamic_debug: remove unneeded includes
These arent currently needed, so drop them.  Some will probably get
re-added when static-branches are added, but include loops prevent
that at present.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-04 17:25:46 -07:00
Greg Kroah-Hartman eb1574270a Merge 3.4-rc5 into driver-core-next
This was done to resolve a merge issue with the init/main.c file.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 14:33:37 -07:00
Aneesh V 9c1c21a053 ddr: add LPDDR2 data from JESD209-2
add LPDDR2 data from the JEDEC spec JESD209-2. The data
includes:

1. Addressing information for LPDDR2 memories of different
   densities and types(S2/S4)
2. AC timing data.

This data will useful for memory controller device drivers.
Right now this is used by the TI EMIF SDRAM controller
driver.

Signed-off-by: Aneesh V <aneesh@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Benoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02 00:04:06 -07:00
Jim Cromie 3ec5652ab7 dynamic_debug: init with early_initcall, not arch_initcall
1- Call dynamic_debug_init() from early_initcall, not arch_initcall.
2- Call dynamic_debug_init_debugfs() from fs_initcall, not module_init.

RFC: This works for me on a 64 bit desktop and a i586 SBC, but is
untested on other arches.  I presume there is or was a reason
original code used arch_initcall, maybe the constraints have changed.

This makes facility available as soon as possible.

2nd change has a downside when dynamic_debug.verbose=1; all the
vpr_info()s called in the proc-fs code are activated, causing
voluminous output from dmesg.  TBD: Im unsure of this explanation, but
the output is there.  This could be fixed by changing those callsites
to v2pr_info(if verbose > 1).

1st change is still not early enough to enable pr_debugs in
kernel/params, so parsing of boot-args isnt logged.  The reparse of
those args is however visible after params.dyndbg="+p" is processed.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:26:31 -04:00
Jim Cromie 29e36c9ffb dynamic_debug: update Documentation/*, Kconfig.debug
In dynamic-debug-howto.txt:

- add section: Debug Messages at Module Initialization Time
- update flags indicators in example outputs to include '='
- make flags descriptions tabular
- add item on '_' flag-char
- add dyndbg, boot-args examples
- rewrap some paragraphs with long lines

In Kconfig.debug, note that compiling with -DDEBUG enables all
pr_debug()s in that code.

In kernel-parameters.txt, add dyndbg and module.dyndbg items,
and deprecate ddebug_query.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:26:30 -04:00
Jim Cromie 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Pass module name into ddebug_exec_queries(), ddebug_exec_query(), and
ddebug_parse_query() as separate parameter.  In ddebug_parse_query(),
the module name is added into the query struct before the query-string
is parsed.  This allows the query-string to be shorter:

instead of:
   $modname.dyndbg="module $modname +fp"
do this:
   $modname.dyndbg="+fp"

Omitting "module $modname" from the query string is actually required
for $modname.dyndbg rules; the set-only-once check added in a previous
patch will throw an error if its added again.  ddebug_query="..." has
no $modname associated with it, so the query string may include it.

This also fixes redundant "module $modname" otherwise needed to handle
multiple queries per string:

   $modname.dyndbg="func foo +fp; func bar +fp"

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:25:39 -04:00
Jim Cromie 4107692760 dynamic_debug: print ram usage by ddebug tables if verbose
Print ram usage of dynamic-debug tables and verbose section so user
knows cost of enabling CONFIG_DYNAMIC_DEBUG.  This only counts the
size of the _ddebug tables for builtins and the __verbose section that
they refer to, not those used in loadable modules.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:25:39 -04:00
Jim Cromie af442399fc dynamic_debug: simplify dynamic_debug_init error exit
We dont want errors while parsing ddebug_query to unload ddebug
tables, so set success after tables are loaded, and return 0 after
query parsing is done.

Simplify error handling code since its no longer used for success,
and change goto label to out_err to clarify this.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:25:39 -04:00
Jim Cromie 6ab676e964 dynamic_debug: combine parse_args callbacks together
Refactor ddebug_dyndbg_boot_param_cb and ddebug_dyndbg_module_param_cb
into a common helper function, and call it from both.  The handling of
foo.dyndbg is unneeded by the latter, but harmless.

The 2 callers differ only by pr_info and the return code they pass to
the helper for when an unknown param is handled.  I could slightly
reduce dmesg clutter by putting the vpr_info in the common helper,
after the return on_err, but that loses __func__ context, is overly
silent on module_cb unknown param errors, and the clutter is only when
dynamic_debug.verbose=1 anyway.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:24:34 -04:00
Jim Cromie f0b919d967 dynamic_debug: deprecate ddebug_query, suggest dyndbg instead
With ddebug_dyndbg_boot_params_cb() handling bare dyndbg params, we
dont need ddebug_query param anymore.  Add a warning when processing
ddebug_query= param that it is deprecated, and to change it to dyndbg=

Add a deprecation notice for v3.8 to feature-removal-schedule.txt, and
add a suggested deprecation period of 3 releases to the header.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 16:24:34 -04:00
Jim Cromie b48420c1d3 dynamic_debug: make dynamic-debug work for module initialization
This introduces a fake module param $module.dyndbg.  Its based upon
Thomas Renninger's $module.ddebug boot-time debugging patch from
https://lkml.org/lkml/2010/9/15/397

The 'fake' module parameter is provided for all modules, whether or
not they need it.  It is not explicitly added to each module, but is
implemented in callbacks invoked from parse_args.

For builtin modules, dynamic_debug_init() now directly calls
parse_args(..., &ddebug_dyndbg_boot_params_cb), to process the params
undeclared in the modules, just after the ddebug tables are processed.

While its slightly weird to reprocess the boot params, parse_args() is
already called repeatedly by do_initcall_levels().  More importantly,
the dyndbg queries (given in ddebug_query or dyndbg params) cannot be
activated until after the ddebug tables are ready, and reusing
parse_args is cleaner than doing an ad-hoc parse.  This reparse would
break options like inc_verbosity, but they probably should be params,
like verbosity=3.

ddebug_dyndbg_boot_params_cb() handles both bare dyndbg (aka:
ddebug_query) and module-prefixed dyndbg params, and ignores all other
parameters.  For example, the following will enable pr_debug()s in 4
builtin modules, in the order given:

  dyndbg="module params +p; module aio +p" module.dyndbg=+p pci.dyndbg

For loadable modules, parse_args() in load_module() calls
ddebug_dyndbg_module_params_cb().  This handles bare dyndbg params as
passed from modprobe, and errors on other unknown params.

Note that modprobe reads /proc/cmdline, so "modprobe foo" grabs all
foo.params, strips the "foo.", and passes these to the kernel.
ddebug_dyndbg_module_params_cb() is again called for the unknown
params; it handles dyndbg, and errors on others.  The "doing" arg
added previously contains the module name.

For non CONFIG_DYNAMIC_DEBUG builds, the stub function accepts
and ignores $module.dyndbg params, other unknowns get -ENOENT.

If no param value is given (as in pci.dyndbg example above), "+p" is
assumed, which enables all pr_debug callsites in the module.

The dyndbg fake parameter is not shown in /sys/module/*/parameters,
thus it does not use any resources.  Changes to it are made via the
control file.

Also change pr_info in ddebug_exec_queries to vpr_info,
no need to see it all the time.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
CC: Thomas Renninger <trenn@suse.de>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 14:31:46 -04:00
Jim Cromie b8ccd5dee7 dynamic_debug: replace if (verbose) pr_info with macro vpr_info
Use vpr_info to declutter code, reduce indenting, and change one
additional pr_info call in ddebug_exec_queries.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-30 13:35:30 -04:00
Dave Jones 559f9badd1 rcu: List-debug variants of rcu list routines.
* Make __list_add_rcu check the next->prev and prev->next pointers
  just like __list_add does.
* Make list_del_rcu use __list_del_entry, which does the same checking
  at deletion time.

Has been running for a week here without anything being tripped up,
but it seems worth adding for completeness just in case something
ever does corrupt those lists.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-04-24 20:54:49 -07:00
yan 6b9606106b lib/kobject.c : Remove redundant check in create_dir
create_dir is a static function used only in kobject_add_internal.
There's no need to do check here, for kobject_add_internal will
reject kobject with invalid name.

Signed-off-by: Yan Hong <clouds.yan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-23 13:34:29 -07:00
Wolfram Sang 4ccf4beab8 lib: add support for stmp-style devices
MX23/28 use IP cores which follow a register layout I have first seen on
STMP3xxx SoCs. In this layout, every register actually has four u32:

 1.) to store a value directly
 2.) a SET register where every 1-bit sets the corresponding bit,
     others are unaffected
 3.) same with a CLR register
 4.) same with a TOG (toggle) register

Also, the 2 MSBs in register 0 are always the same and can be used to reset
the IP core.

All this is strictly speaking not mach-specific (but IP core specific) and,
thus, doesn't need to be in mach-mxs/include. At least mx6 also uses IP cores
following this stmp-style. So:

Introduce a stmp-style device, put the code and defines for that in a public
place (lib/), and let drivers for stmp-style devices select that code.
To avoid regressions and ease reviewing, the actual code is simply copied from
mach-mxs. It definately wants updates, but those need a seperate patch series.

Voila, mach dependency gone, reusable code introduced. Note that I didn't
remove the duplicated code from mach-mxs yet, first the drivers have to be
converted.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-04-20 23:27:08 +02:00
Greg Kroah-Hartman 7cd9c9bb57 Revert "driver core: check start node in klist_iter_init_node"
This reverts commit a15d49fd30 as that
patch broke the build.

Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-19 19:17:30 -07:00
Hannes Reinecke a15d49fd30 driver core: check start node in klist_iter_init_node
klist_iter_init_node() takes a node as a start argument.
However, this node might not be valid anymore.
This patch updates the klist_iter_init_node() and
dependent functions to return an error if so.
All calling functions have been audited to check
for a return code here.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Greg Kroah-Hartmann <gregkh@linuxfoundation.org>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Stable Kernel <stable@kernel.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-18 15:39:52 -07:00
Dan Carpenter 3340808cf0 debugobjects: Fill_pool() returns void now
There was a return missed in 1fda107d44 "debugobjects: Remove unused
return value from fill_pool()".  It makes gcc complain:

	lib/debugobjects.c: In function ‘fill_pool’:
	lib/debugobjects.c:98:4: warning: ‘return’ with a value, in
		function returning void [enabled by default]

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: http://lkml.kernel.org/r/20120418112810.GA2669@elgon.mountain
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-18 13:38:48 +02:00
Jesper Juhl 09c79b6096 mpi: Avoid using freed pointer in mpi_lshift_limbs()
At the start of the function we assign 'a->d' to 'ap'. Then we use the
RESIZE_IF_NEEDED macro on 'a' - this may free 'a->d' and replace it
with newly allocaetd storage. In that case, we'll be operating on
freed memory further down in the function when we index into 'ap[]'.
Since we don't actually need 'ap' until after the use of the
RESIZE_IF_NEEDED macro we can just delay the assignment to it until
after we've potentially resized, thus avoiding the issue.

While I was there anyway I also changed the integer variable 'n' to be
const. It might as well be since we only assign to it once and use it
as a constant, and then the compiler will tell us if we ever assign to
it in the future.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2012-04-18 12:14:28 +10:00
Jakub Kicinski 29cdd4e4ec dma-debug: release free_entries_lock before saving stack trace
Saving stack trace can take a while and once the entry
is allocated free_entries_lock is no longer needed.

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-04-12 12:28:46 +02:00
Thomas Gleixner 765a5e0cb5 debugobjects: printk with irqs enabled
No point in keeping interrupts disabled here.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-11 11:56:17 +02:00
Thomas Gleixner 1fda107d44 debugobjects: Remove unused return value from fill_pool()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-11 11:56:17 +02:00
Dan Williams 282029c005 kobject: provide more diagnostic info for kobject_add_internal() failures
1/ convert open-coded KERN_ERR+dump_stack() to WARN(), so that automated
   tools pick up this warning.

2/ include the 'child' and 'parent' kobject names.  This information was
   useful for tracking down the case where scsi invoked device_del() on a
   parent object and subsequently invoked device_add() on a child.  Now the
   warning looks like:

     kobject_add_internal failed for target8:0:16 (error: -2 parent: end_device-8:0:24)
     Pid: 2942, comm: scsi_scan_8 Not tainted 3.3.0-rc7-isci+ #2
     Call Trace:
      [<ffffffff8125e551>] kobject_add_internal+0x1c1/0x1f3
      [<ffffffff81075149>] ? trace_hardirqs_on+0xd/0xf
      [<ffffffff8125e659>] kobject_add_varg+0x41/0x50
      [<ffffffff8125e723>] kobject_add+0x64/0x66
      [<ffffffff8131124b>] device_add+0x12d/0x63a
      [<ffffffff8125e0ef>] ? kobject_put+0x4c/0x50
      [<ffffffff8132f370>] scsi_sysfs_add_sdev+0x4e/0x28a
      [<ffffffff8132dce3>] do_scan_async+0x9c/0x145

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-10 14:48:51 -07:00
Andi Kleen 1873e870fd debug: Add CONFIG_READABLE_ASM
Add a config option to disable various gcc compiler optimizations that
make assembler listings much harder to read. This is everything that reorders
code significantly or creates partial functions.

This is mainly to keep kernel hackers sane.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1332960678-11879-2-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2012-03-30 10:15:21 -07:00
Linus Torvalds 6b8212a313 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Ingo Molnar.

This touches some non-x86 files due to the sanitized INLINE_SPIN_UNLOCK
config usage.

Fixed up trivial conflicts due to just header include changes (removing
headers due to cpu_idle() merge clashing with the <asm/system.h> split).

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/amd: Be more verbose about LVT offset assignments
  x86, tls: Off by one limit check
  x86/ioapic: Add io_apic_ops driver layer to allow interception
  x86/olpc: Add debugfs interface for EC commands
  x86: Merge the x86_32 and x86_64 cpu_idle() functions
  x86/kconfig: Remove CONFIG_TR=y from the defconfigs
  x86: Stop recursive fault in print_context_stack after stack overflow
  x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y
  x86/apic: Add separate apic_id_valid() functions for selected apic drivers
  locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage
  x86/kconfig: Update defconfigs
  x86: Fix excessive MSR print out when show_msr is not specified
2012-03-29 14:28:26 -07:00
Linus Torvalds 532bfc851a Merge branch 'akpm' (Andrew's patch-bomb)
Merge third batch of patches from Andrew Morton:
 - Some MM stragglers
 - core SMP library cleanups (on_each_cpu_mask)
 - Some IPI optimisations
 - kexec
 - kdump
 - IPMI
 - the radix-tree iterator work
 - various other misc bits.

 "That'll do for -rc1.  I still have ~10 patches for 3.4, will send
  those along when they've baked a little more."

* emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
  backlight: fix typo in tosa_lcd.c
  crc32: add help text for the algorithm select option
  mm: move hugepage test examples to tools/testing/selftests/vm
  mm: move slabinfo.c to tools/vm
  mm: move page-types.c from Documentation to tools/vm
  selftests/Makefile: make `run_tests' depend on `all'
  selftests: launch individual selftests from the main Makefile
  radix-tree: use iterators in find_get_pages* functions
  radix-tree: rewrite gang lookup using iterator
  radix-tree: introduce bit-optimized iterator
  fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
  nbd: rename the nbd_device variable from lo to nbd
  pidns: add reboot_pid_ns() to handle the reboot syscall
  sysctl: use bitmap library functions
  ipmi: use locks on watchdog timeout set on reboot
  ipmi: simplify locking
  ipmi: fix message handling during panics
  ipmi: use a tasklet for handling received messages
  ipmi: increase KCS timeouts
  ipmi: decrease the IPMI message transaction time in interrupt mode
  ...
2012-03-28 17:19:28 -07:00
Darrick J. Wong 82edb4baa7 crc32: add help text for the algorithm select option
Add help text to the crc32 algorithm selection option in Kconfig.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Konstantin Khlebnikov cebbd29e1c radix-tree: rewrite gang lookup using iterator
Rewrite radix_tree_gang_lookup_* functions using the new radix-tree
iterator.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Tested-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Konstantin Khlebnikov 78c1d78488 radix-tree: introduce bit-optimized iterator
A series of radix tree cleanups, and usage of them in the core pagecache
code.

Micro-benchmark:

lookup 14 slots (typical page-vector size)
in radix-tree there earch <step> slot filled and tagged
before/after - nsec per full scan through tree

* Intel Sandy Bridge i7-2620M 4Mb L3
New code always faster

* AMD Athlon 6000+ 2x1Mb L2, without L3
New code generally faster,
Minor degradation (marked with "*") for huge sparse trees

* i386 on Sandy Bridge
New code faster for common cases: tagged and dense trees.
Some degradations for non-tagged lookup on sparse trees.

Ideally, there might help __ffs() analog for searching first non-zero
long element in array, gcc sometimes cannot optimize this loop corretly.

Numbers:

CPU: Intel Sandy Bridge i7-2620M 4Mb L3

radix-tree with 1024 slots:

tagged lookup

step  1      before  7156        after  3613
step  2      before  5399        after  2696
step  3      before  4779        after  1928
step  4      before  4456        after  1429
step  5      before  4292        after  1213
step  6      before  4183        after  1052
step  7      before  4157        after  951
step  8      before  4016        after  812
step  9      before  3952        after  851
step  10     before  3937        after  732
step  11     before  4023        after  709
step  12     before  3872        after  657
step  13     before  3892        after  633
step  14     before  3720        after  591
step  15     before  3879        after  578
step  16     before  3561        after  513

normal lookup

step  1      before  4266       after  3301
step  2      before  2695       after  2129
step  3      before  2083       after  1712
step  4      before  1801       after  1534
step  5      before  1628       after  1313
step  6      before  1551       after  1263
step  7      before  1475       after  1185
step  8      before  1432       after  1167
step  9      before  1373       after  1092
step  10     before  1339       after  1134
step  11     before  1292       after  1056
step  12     before  1319       after  1030
step  13     before  1276       after  1004
step  14     before  1256       after  987
step  15     before  1228       after  992
step  16     before  1247       after  999

radix-tree with 1024*1024*128 slots:

tagged lookup

step  1      before  1086102841  after  674196409
step  2      before  816839155   after  498138306
step  7      before  599728907   after  240676762
step  15     before  555729253   after  185219677
step  63     before  606637748   after  128585664
step  64     before  608384432   after  102945089
step  65     before  596987114   after  123996019
step  128    before  304459225   after  56783056
step  256    before  158846855   after  31232481
step  512    before  86085652    after  18950595
step  12345  before  6517189     after  1674057

normal lookup

step  1      before  626064869  after  544418266
step  2      before  418809975  after  336321473
step  7      before  242303598  after  207755560
step  15     before  208380563  after  176496355
step  63     before  186854206  after  167283638
step  64     before  176188060  after  170143976
step  65     before  185139608  after  167487116
step  128    before  88181865   after  86913490
step  256    before  45733628   after  45143534
step  512    before  24506038   after  23859036
step  12345  before  2177425    after  2018662

* AMD Athlon 6000+ 2x1Mb L2, without L3

radix-tree with 1024 slots:

tag-lookup

step  1      before  8164        after  5379
step  2      before  5818        after  5581
step  3      before  4959        after  4213
step  4      before  4371        after  3386
step  5      before  4204        after  2997
step  6      before  4950        after  2744
step  7      before  4598        after  2480
step  8      before  4251        after  2288
step  9      before  4262        after  2243
step  10     before  4175        after  2131
step  11     before  3999        after  2024
step  12     before  3979        after  1994
step  13     before  3842        after  1929
step  14     before  3750        after  1810
step  15     before  3735        after  1810
step  16     before  3532        after  1660

normal-lookup

step  1      before  7875        after  5847
step  2      before  4808        after  4071
step  3      before  4073        after  3462
step  4      before  3677        after  3074
step  5      before  4308        after  2978
step  6      before  3911        after  3807
step  7      before  3635        after  3522
step  8      before  3313        after  3202
step  9      before  3280        after  3257
step  10     before  3166        after  3083
step  11     before  3066        after  3026
step  12     before  2985        after  2982
step  13     before  2925        after  2924
step  14     before  2834        after  2808
step  15     before  2805        after  2803
step  16     before  2647        after  2622

radix-tree with 1024*1024*128 slots:

tag-lookup

step  1      before  1288059720  after  951736580
step  2      before  961292300   after  884212140
step  7      before  768905140   after  547267580
step  15     before  771319480   after  456550640
step  63     before  504847640   after  242704304
step  64     before  392484800   after  177920786
step  65     before  491162160   after  246895264
step  128    before  208084064   after  97348392
step  256    before  112401035   after  51408126
step  512    before  75825834    after  29145070
step  12345  before  5603166     after  2847330

normal-lookup

step  1      before  1025677120  after  861375100
step  2      before  647220080   after  572258540
step  7      before  505518960   after  484041813
step  15     before  430483053   after  444815320	*
step  63     before  388113453   after  404250546	*
step  64     before  374154666   after  396027440	*
step  65     before  381423973   after  396704853	*
step  128    before  190078700   after  202619384	*
step  256    before  100886756   after  102829108	*
step  512    before  64074505    after  56158720
step  12345  before  4237289     after  4422299		*

* i686 on Sandy bridge

radix-tree with 1024 slots:

tagged lookup

step  1      before  7990        after  4019
step  2      before  5698        after  2897
step  3      before  5013        after  2475
step  4      before  4630        after  1721
step  5      before  4346        after  1759
step  6      before  4299        after  1556
step  7      before  4098        after  1513
step  8      before  4115        after  1222
step  9      before  3983        after  1390
step  10     before  4077        after  1207
step  11     before  3921        after  1231
step  12     before  3894        after  1116
step  13     before  3840        after  1147
step  14     before  3799        after  1090
step  15     before  3797        after  1059
step  16     before  3783        after  745

normal lookup

step  1      before  5103       after  3499
step  2      before  3299       after  2550
step  3      before  2489       after  2370
step  4      before  2034       after  2302		*
step  5      before  1846       after  2268		*
step  6      before  1752       after  2249		*
step  7      before  1679       after  2164		*
step  8      before  1627       after  2153		*
step  9      before  1542       after  2095		*
step  10     before  1479       after  2109		*
step  11     before  1469       after  2009		*
step  12     before  1445       after  2039		*
step  13     before  1411       after  2013		*
step  14     before  1374       after  2046		*
step  15     before  1340       after  1975		*
step  16     before  1331       after  2000		*

radix-tree with 1024*1024*128 slots:

tagged lookup

step  1      before  1225865377  after  667153553
step  2      before  842427423   after  471533007
step  7      before  609296153   after  276260116
step  15     before  544232060   after  226859105
step  63     before  519209199   after  141343043
step  64     before  588980279   after  141951339
step  65     before  521099710   after  138282060
step  128    before  298476778   after  83390628
step  256    before  149358342   after  43602609
step  512    before  76994713    after  22911077
step  12345  before  5328666     after  1472111

normal lookup

step  1      before  819284564  after  533635310
step  2      before  512421605  after  364956155
step  7      before  271443305  after  305721345	*
step  15     before  223591630  after  273960216	*
step  63     before  190320247  after  217770207	*
step  64     before  178538168  after  267411372	*
step  65     before  186400423  after  215347937	*
step  128    before  88106045   after  140540612	*
step  256    before  44812420   after  70660377		*
step  512    before  24435438   after  36328275		*
step  12345  before  2123924    after  2148062		*

bloat-o-meter delta for this patchset + patchset with related shmem cleanups

bloat-o-meter: x86_64

add/remove: 4/3 grow/shrink: 5/6 up/down: 928/-939 (-11)
function                                     old     new   delta
radix_tree_next_chunk                          -     499    +499
shmem_unuse                                  428     554    +126
shmem_radix_tree_replace                     131     227     +96
find_get_pages_tag                           354     419     +65
find_get_pages_contig                        345     407     +62
find_get_pages                               362     396     +34
__kstrtab_radix_tree_next_chunk                -      22     +22
__ksymtab_radix_tree_next_chunk                -      16     +16
__kcrctab_radix_tree_next_chunk                -       8      +8
radix_tree_gang_lookup_slot                  204     203      -1
static.shmem_xattr_set                       384     381      -3
radix_tree_gang_lookup_tag_slot              208     191     -17
radix_tree_gang_lookup                       231     187     -44
radix_tree_gang_lookup_tag                   247     199     -48
shmem_unlock_mapping                         278     190     -88
__lookup                                     217       -    -217
__lookup_tag                                 242       -    -242
radix_tree_locate_item                       279       -    -279

bloat-o-meter: i386

add/remove: 3/3 grow/shrink: 8/9 up/down: 1075/-1275 (-200)
function                                     old     new   delta
radix_tree_next_chunk                          -     757    +757
shmem_unuse                                  352     449     +97
find_get_pages_contig                        269     322     +53
shmem_radix_tree_replace                     113     154     +41
find_get_pages_tag                           277     318     +41
dcache_dir_lseek                             426     458     +32
__kstrtab_radix_tree_next_chunk                -      22     +22
vc_do_resize                                 968     977      +9
snd_pcm_lib_read1                            725     733      +8
__ksymtab_radix_tree_next_chunk                -       8      +8
netlbl_cipsov4_list                         1120    1127      +7
find_get_pages                               293     291      -2
new_slab                                     467     459      -8
bitfill_unaligned_rev                        425     417      -8
radix_tree_gang_lookup_tag_slot              177     146     -31
blk_dump_cmd                                 267     229     -38
radix_tree_gang_lookup_slot                  212     134     -78
shmem_unlock_mapping                         221     128     -93
radix_tree_gang_lookup_tag                   275     162    -113
radix_tree_gang_lookup                       255     126    -129
__lookup                                     227       -    -227
__lookup_tag                                 271       -    -271
radix_tree_locate_item                       277       -    -277

This patch:

Implement a clean, simple and effective radix-tree iteration routine.

Iterating divided into two phases:
* lookup next chunk in radix-tree leaf node
* iterating through slots in this chunk

Main iterator function radix_tree_next_chunk() returns pointer to first
slot, and stores in the struct radix_tree_iter index of next-to-last slot.
 For tagged-iterating it also constuct bitmask of tags for retunted chunk.
 All additional logic implemented as static-inline functions and macroses.

Also adds radix_tree_find_next_bit() static-inline variant of
find_next_bit() optimized for small constant size arrays, because
find_next_bit() too heavy for searching in an array with one/two long
elements.

[akpm@linux-foundation.org: rework comments a bit]
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Tested-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:37 -07:00
Srivatsa S. Bhat 38b93780a5 lib/cpumask.c: remove __any_online_cpu()
__any_online_cpu() is not optimal and also unnecessary.  So, replace its
use by faster cpumask_* operations.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:35 -07:00
Linus Torvalds 0195c00244 Disintegrate and delete asm/system.h
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAT3NKzROxKuMESys7AQKElw/+JyDxJSlj+g+nymkx8IVVuU8CsEwNLgRk
 8KEnRfLhGtkXFLSJYWO6jzGo16F8Uqli1PdMFte/wagSv0285/HZaKlkkBVHdJ/m
 u40oSjgT013bBh6MQ0Oaf8pFezFUiQB5zPOA9QGaLVGDLXCmgqUgd7exaD5wRIwB
 ZmyItjZeAVnDfk1R+ZiNYytHAi8A5wSB+eFDCIQYgyulA1Igd1UnRtx+dRKbvc/m
 rWQ6KWbZHIdvP1ksd8wHHkrlUD2pEeJ8glJLsZUhMm/5oMf/8RmOCvmo8rvE/qwl
 eDQ1h4cGYlfjobxXZMHqAN9m7Jg2bI946HZjdb7/7oCeO6VW3FwPZ/Ic75p+wp45
 HXJTItufERYk6QxShiOKvA+QexnYwY0IT5oRP4DrhdVB/X9cl2MoaZHC+RbYLQy+
 /5VNZKi38iK4F9AbFamS7kd0i5QszA/ZzEzKZ6VMuOp3W/fagpn4ZJT1LIA3m4A9
 Q0cj24mqeyCfjysu0TMbPtaN+Yjeu1o1OFRvM8XffbZsp5bNzuTDEvviJ2NXw4vK
 4qUHulhYSEWcu9YgAZXvEWDEM78FXCkg2v/CrZXH5tyc95kUkMPcgG+QZBB5wElR
 FaOKpiC/BuNIGEf02IZQ4nfDxE90QwnDeoYeV+FvNj9UEOopJ5z5bMPoTHxm4cCD
 NypQthI85pc=
 =G9mT
 -----END PGP SIGNATURE-----

Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system

Pull "Disintegrate and delete asm/system.h" from David Howells:
 "Here are a bunch of patches to disintegrate asm/system.h into a set of
  separate bits to relieve the problem of circular inclusion
  dependencies.

  I've built all the working defconfigs from all the arches that I can
  and made sure that they don't break.

  The reason for these patches is that I recently encountered a circular
  dependency problem that came about when I produced some patches to
  optimise get_order() by rewriting it to use ilog2().

  This uses bitops - and on the SH arch asm/bitops.h drags in
  asm-generic/get_order.h by a circuituous route involving asm/system.h.

  The main difficulty seems to be asm/system.h.  It holds a number of
  low level bits with no/few dependencies that are commonly used (eg.
  memory barriers) and a number of bits with more dependencies that
  aren't used in many places (eg.  switch_to()).

  These patches break asm/system.h up into the following core pieces:

    (1) asm/barrier.h

        Move memory barriers here.  This already done for MIPS and Alpha.

    (2) asm/switch_to.h

        Move switch_to() and related stuff here.

    (3) asm/exec.h

        Move arch_align_stack() here.  Other process execution related bits
        could perhaps go here from asm/processor.h.

    (4) asm/cmpxchg.h

        Move xchg() and cmpxchg() here as they're full word atomic ops and
        frequently used by atomic_xchg() and atomic_cmpxchg().

    (5) asm/bug.h

        Move die() and related bits.

    (6) asm/auxvec.h

        Move AT_VECTOR_SIZE_ARCH here.

  Other arch headers are created as needed on a per-arch basis."

Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that.  We'll find out anything that got broken and fix it..

* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
  Delete all instances of asm/system.h
  Remove all #inclusions of asm/system.h
  Add #includes needed to permit the removal of asm/system.h
  Move all declarations of free_initmem() to linux/mm.h
  Disintegrate asm/system.h for OpenRISC
  Split arch_align_stack() out from asm-generic/system.h
  Split the switch_to() wrapper out of asm-generic/system.h
  Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
  Create asm-generic/barrier.h
  Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
  Disintegrate asm/system.h for Xtensa
  Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
  Disintegrate asm/system.h for Tile
  Disintegrate asm/system.h for Sparc
  Disintegrate asm/system.h for SH
  Disintegrate asm/system.h for Score
  Disintegrate asm/system.h for S390
  Disintegrate asm/system.h for PowerPC
  Disintegrate asm/system.h for PA-RISC
  Disintegrate asm/system.h for MN10300
  ...
2012-03-28 15:58:21 -07:00
David Howells 9ffc93f203 Remove all #inclusions of asm/system.h
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it.  Performed with the following command:

perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`

Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-28 18:30:03 +01:00
David Howells ae3a197e3d Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PowerPC.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: linuxppc-dev@lists.ozlabs.org
2012-03-28 18:30:02 +01:00
Linus Torvalds fa453a625d Merge branch 'for-linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML changes from Richard Weinberger:
 "Mostly bug fixes and cleanups"

* 'for-linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: (35 commits)
  um: Update defconfig
  um: Switch to large mcmodel on x86_64
  MTD: Relax dependencies
  um: Wire CONFIG_GENERIC_IO up
  um: Serve io_remap_pfn_range()
  Introduce CONFIG_GENERIC_IO
  um: allow SUBARCH=x86
  um: most of the SUBARCH uses can be killed
  um: deadlock in line_write_interrupt()
  um: don't bother trying to rebuild CHECKFLAGS for USER_OBJS
  um: use the right ifdef around exports in user_syms.c
  um: a bunch of headers can be killed by using generic-y
  um: ptrace-generic.h doesn't need user.h
  um: kill HOST_TASK_PID
  um: remove pointless include of asm/fixmap.h from asm/pgtable.h
  um: asm-offsets.h might as well come from underlying arch...
  um: merge processor_{32,64}.h a bit...
  um: switch close_chan() to struct line
  um: race fix: initialize delayed_work *before* registering IRQ
  um: line->have_irq is never checked...
  ...
2012-03-27 18:29:53 -07:00
Richard Weinberger 087fafd152 Introduce CONFIG_GENERIC_IO
There are situations where CONFIG_HAS_IOMEM is too restrictive.
For example CONFIG_MTD_NAND_NANDSIM depends on CONFIG_HAS_IOMEM
but it works perfectly fine if an architecture without io memory
just includes asm-generic/io.h or implements everything defined in it.
UML is such a corner case.

Signed-off-by: Richard Weinberger <richard@nod.at>
2012-03-25 00:29:56 +01:00
Linus Torvalds 11bcb32848 The following text was taken from the original review request:
"[PATCH 0/3] RFC - module.h usage cleanups in fs/ and lib/"
 		https://lkml.org/lkml/2012/2/29/589
 --
 
 Fix up files in fs/ and lib/ dirs to only use module.h if they really
 need it.
 
 These are trivial in scope vs. the work done previously.  We now have
 things where any few remaining cleanups can be farmed out to arch or
 subsystem maintainers, and I have done so when possible.  What is
 remaining here represents the bits that don't clearly lie within a
 single arch/subsystem boundary, like the fs dir and the lib dir.
 
 Some duplicate includes arising from overlapping fixes from
 independent subsystem maintainer submissions are also quashed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNw3AAoJEOvOhAQsB9HWA7wQALrsQ6V6Z+B3KsvSoD5kFnpZ
 Y+4uggs+GdUdWmtRrZnTBp896gGuUgBxc3syA2XWd7Oqi49+c5c1m0cFxKyVdIHm
 fB+jmxS69soADtHR3cXmxcQshrUzUf2rTn8frcw4O/BmJuplv4xT9uPQzwGaRSZT
 gomQsQ1bGnkwjO2jfS8f/N5Mjr8u/z0WF7TTOTUSq+Cv3BervPaSPF1Ea6J8oo+N
 4+/n8RlU1HWiI4inrgrFPN6UHmE45BAL2xGbB47LgooHJW8P5kAnU+vxGScaoy1Q
 JKX9WKT3VCiwR3VOPa86iLKP3Y8a3VlhyGn+yzzcYkGX/n0tbT7aoRhQm21sGIv0
 DoeXWe7aiiY8cEW69G6GIfRPFl+Zh81m1Whbu7IZT/sV3asx6jWmEXE8CgCfeDt5
 mNQk9D4Irf6+rmCSbeSVC4L0eFfLxNFouNyh2aus/q+gIjKNKYwZQryHrodK4wpv
 UgMKSTZfPrTAWay2gCNWNqo3Zs8e1LDqkftetxeU3jx2kTuaNzBl4Y7mhsX7sLYe
 MsFX3JUJ2pn6XWbgqcY+bdr/mzgsCrjzqdf15MTUzEc5SIfVF+XpNNZN1ITwl6UA
 /ZH9keBu1mEdCoPU5W74kYwx4p35hIeWJGfc0MRp07ruf941F+SBgMD11B0+06f0
 pN0DcITTkD16+sS4x1cB
 =Z4w0
 -----END PGP SIGNATURE-----

Merge tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull cleanup of fs/ and lib/ users of module.h from Paul Gortmaker:
 "Fix up files in fs/ and lib/ dirs to only use module.h if they really
  need it.

  These are trivial in scope vs the work done previously.  We now have
  things where any few remaining cleanups can be farmed out to arch or
  subsystem maintainers, and I have done so when possible.  What is
  remaining here represents the bits that don't clearly lie within a
  single arch/subsystem boundary, like the fs dir and the lib dir.

  Some duplicate includes arising from overlapping fixes from
  independent subsystem maintainer submissions are also quashed."

Fix up trivial conflicts due to clashes with other include file cleanups
(including some due to the previous bug.h cleanup pull).

* tag 'module-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  lib: reduce the use of module.h wherever possible
  fs: reduce the use of module.h wherever possible
  includecheck: delete any duplicate instances of module.h
2012-03-24 10:24:31 -07:00
Linus Torvalds ed2d265d12 The following text was taken from the original review request:
"[RFC - PATCH 0/7] consolidation of BUG support code."
 		https://lkml.org/lkml/2012/1/26/525
 --
 
 The changes shown here are to unify linux's BUG support under
 the one <linux/bug.h> file.  Due to historical reasons, we have
 some BUG code in bug.h and some in kernel.h -- i.e. the support for
 BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h,
 but old code in kernel.h wasn't moved to bug.h at that time.  As
 a band-aid, kernel.h was including <asm/bug.h> to pseudo link them.
 
 This has caused confusion[1] and general yuck/WTF[2] reactions.
 Here is an example that violates the principle of least surprise:
 
       CC      lib/string.o
       lib/string.c: In function 'strlcat':
       lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
       make[2]: *** [lib/string.o] Error 1
       $
       $ grep linux/bug.h lib/string.c
       #include <linux/bug.h>
       $
 
 We've included <linux/bug.h> for the BUG infrastructure and yet we
 still get a compile fail!  [We've not kernel.h for BUILD_BUG_ON.]
 Ugh - very confusing for someone who is new to kernel development.
 
 With the above in mind, the goals of this changeset are:
 
 1) find and fix any include/*.h files that were relying on the
    implicit presence of BUG code.
 2) find and fix any C files that were consuming kernel.h and
    hence relying on implicitly getting some/all BUG code.
 3) Move the BUG related code living in kernel.h to <linux/bug.h>
 4) remove the asm/bug.h from kernel.h to finally break the chain.
 
 During development, the order was more like 3-4, build-test, 1-2.
 But to ensure that git history for bisect doesn't get needless
 build failures introduced, the commits have been reorderd to fix
 the problem areas in advance.
 
 [1]  https://lkml.org/lkml/2012/1/3/90
 [2]  https://lkml.org/lkml/2012/1/17/414
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPbNwpAAoJEOvOhAQsB9HWrqYP/A0t9VB0nK6e42F0OR2P14MZ
 GJFtf1B++wwioIrx+KSWSRfSur1C5FKhDbxLR3I/pvkAYl4+T4JvRdMG6xJwxyip
 CC1kVQQNDjWVVqzjz2x6rYkOffx6dUlw/ERyIyk+OzP+1HzRIsIrugMqbzGLlX0X
 y0v2Tbd0G6xg1DV8lcRdp95eIzcGuUvdb2iY2LGadWZczEOeSXx64Jz3QCFxg3aL
 LFU4oovsg8Nb7MRJmqDvHK/oQf5vaTm9WSrS0pvVte0msSQRn8LStYdWC0G9BPCS
 GwL86h/eLXlUXQlC5GpgWg1QQt5i2QpjBFcVBIG0IT5SgEPMx+gXyiqZva2KwbHu
 LKicjKtfnzPitQnyEV/N6JyV1fb1U6/MsB7ebU5nCCzt9Gr7MYbjZ44peNeprAtu
 HMvJ/BNnRr4Ha6nPQNu952AdASPKkxmeXFUwBL1zUbLkOX/bK/vy1ujlcdkFxCD7
 fP3t7hghYa737IHk0ehUOhrE4H67hvxTSCKioLUAy/YeN1IcfH/iOQiCBQVLWmoS
 AqYV6ou9cqgdYoyila2UeAqegb+8xyubPIHt+lebcaKxs5aGsTg+r3vq5juMDAPs
 iwSVYUDcIw9dHer1lJfo7QCy3QUTRDTxh+LB9VlHXQICgeCK02sLBOi9hbEr4/H8
 Ko9g8J3BMxcMkXLHT9ud
 =PYQT
 -----END PGP SIGNATURE-----

Merge tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull <linux/bug.h> cleanup from Paul Gortmaker:
 "The changes shown here are to unify linux's BUG support under the one
  <linux/bug.h> file.  Due to historical reasons, we have some BUG code
  in bug.h and some in kernel.h -- i.e.  the support for BUILD_BUG in
  linux/kernel.h predates the addition of linux/bug.h, but old code in
  kernel.h wasn't moved to bug.h at that time.  As a band-aid, kernel.h
  was including <asm/bug.h> to pseudo link them.

  This has caused confusion[1] and general yuck/WTF[2] reactions.  Here
  is an example that violates the principle of least surprise:

      CC      lib/string.o
      lib/string.c: In function 'strlcat':
      lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON'
      make[2]: *** [lib/string.o] Error 1
      $
      $ grep linux/bug.h lib/string.c
      #include <linux/bug.h>
      $

  We've included <linux/bug.h> for the BUG infrastructure and yet we
  still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh -
  very confusing for someone who is new to kernel development.

  With the above in mind, the goals of this changeset are:

  1) find and fix any include/*.h files that were relying on the
     implicit presence of BUG code.
  2) find and fix any C files that were consuming kernel.h and hence
     relying on implicitly getting some/all BUG code.
  3) Move the BUG related code living in kernel.h to <linux/bug.h>
  4) remove the asm/bug.h from kernel.h to finally break the chain.

  During development, the order was more like 3-4, build-test, 1-2.  But
  to ensure that git history for bisect doesn't get needless build
  failures introduced, the commits have been reorderd to fix the problem
  areas in advance.

	[1]  https://lkml.org/lkml/2012/1/3/90
	[2]  https://lkml.org/lkml/2012/1/17/414"

Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul
and linux-next.

* tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  kernel.h: doesn't explicitly use bug.h, so don't include it.
  bug: consolidate BUILD_BUG_ON with other bug code
  BUG: headers with BUG/BUG_ON etc. need linux/bug.h
  bug.h: add include of it to various implicit C users
  lib: fix implicit users of kernel.h for TAINT_WARN
  spinlock: macroize assert_spin_locked to avoid bug.h dependency
  x86: relocate get/set debugreg fcns to include/asm/debugreg.
2012-03-24 10:08:39 -07:00
Linus Torvalds f1d38e423a Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl
Pull sysctl updates from Eric Biederman:

 - Rewrite of sysctl for speed and clarity.

   Insert/remove/Lookup in sysctl are all now O(NlogN) operations, and
   are no longer bottlenecks in the process of adding and removing
   network devices.

   sysctl is now focused on being a filesystem instead of system call
   and the code can all be found in fs/proc/proc_sysctl.c.  Hopefully
   this means the code is now approachable.

   Much thanks is owed to Lucian Grinjincu for keeping at this until
   something was found that was usable.

 - The recent proc_sys_poll oops found by the fuzzer during hibernation
   is fixed.

* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl: (36 commits)
  sysctl: protect poll() in entries that may go away
  sysctl: Don't call sysctl_follow_link unless we are a link.
  sysctl: Comments to make the code clearer.
  sysctl: Correct error return from get_subdir
  sysctl: An easier to read version of find_subdir
  sysctl: fix memset parameters in setup_sysctl_set()
  sysctl: remove an unused variable
  sysctl: Add register_sysctl for normal sysctl users
  sysctl: Index sysctl directories with rbtrees.
  sysctl: Make the header lists per directory.
  sysctl: Move sysctl_check_dups into insert_header
  sysctl: Modify __register_sysctl_paths to take a set instead of a root and an nsproxy
  sysctl: Replace root_list with links between sysctl_table_sets.
  sysctl: Add sysctl_print_dir and use it in get_subdir
  sysctl: Stop requiring explicit management of sysctl directories
  sysctl: Add a root pointer to ctl_table_set
  sysctl: Rewrite proc_sys_readdir in terms of first_entry and next_entry
  sysctl: Rewrite proc_sys_lookup introducing find_entry and lookup_entry.
  sysctl: Normalize the root_table data structure.
  sysctl: Factor out insert_header and erase_header
  ...
2012-03-23 18:08:58 -07:00
KAMEZAWA Hiroyuki 1ac101a5d6 procfs: add num_to_str() to speed up /proc/stat
== stat_check.py
num = 0
with open("/proc/stat") as f:
        while num < 1000 :
                data = f.read()
                f.seek(0, 0)
                num = num + 1
==

perf shows

    20.39%  stat_check.py  [kernel.kallsyms]    [k] format_decode
    13.41%  stat_check.py  [kernel.kallsyms]    [k] number
    12.61%  stat_check.py  [kernel.kallsyms]    [k] vsnprintf
    10.85%  stat_check.py  [kernel.kallsyms]    [k] memcpy
     4.85%  stat_check.py  [kernel.kallsyms]    [k] radix_tree_lookup
     4.43%  stat_check.py  [kernel.kallsyms]    [k] seq_printf

This patch removes most of calls to vsnprintf() by adding num_to_str()
and seq_print_decimal_ull(), which prints decimal numbers without rich
functions provided by printf().

On my 8cpu box.
== Before patch ==
[root@bluextal test]# time ./stat_check.py

real    0m0.150s
user    0m0.026s
sys     0m0.121s

== After patch ==
[root@bluextal test]# time ./stat_check.py

real    0m0.055s
user    0m0.022s
sys     0m0.030s

[akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()]
[andrea@betterlinux.com: avoid breaking the ABI in /proc/stat]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrea Righi <andrea@betterlinux.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Turner <pjt@google.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:42 -07:00
Darrick J. Wong 5cde7656d0 crc32: select an algorithm via Kconfig
Allow the kernel builder to choose a crc32* algorithm for the kernel.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Darrick J. Wong 577eba9e22 crc32: add self-test code for crc32c
Add self-test code for crc32c.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Darrick J. Wong 46c5801eaf crc32: bolt on crc32c
Reuse the existing crc32 code to stamp out a crc32c implementation.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Bob Pearson 78dff41897 crc32: add note about this patchset to crc32.c
Add a comment at the top of crc32.c

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:38 -07:00
Bob Pearson 0292c497b6 crc32: optimize loop counter for x86
Add two changes that improve the performance of x86 systems

1. replace main loop with incrementing counter this change improves
   the performance of the selftest by about 5-6% on Nehalem CPUs.  The
   apparent reason is that the compiler can use the loop index to perform
   an indexed memory access.  This is reported to make the performance of
   PowerPC CPUs to get worse.

2. replace the rem_len loop with incrementing counter this change
   improves the performance of the selftest, which has more than the usual
   number of occurances, by about 1-2% on x86 CPUs.  In actual work loads
   the length is most often a multiple of 4 bytes and this code does not
   get executed as often if at all.  Again this change is reported to make
   the performance of PowerPC get worse.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson 324eb0f17d crc32: add slice-by-8 algorithm to existing code
Add slicing-by-8 algorithm to the existing slicing-by-4 algorithm.  This
consists of:

- extend largest BITS size from 32 to 64
- extend tables from tab[4][256] to up to tab[8][256]
- Add code for inner loop.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson 9a1dbf6a29 crc32: make CRC_*_BITS definition correspond to actual bit counts
crc32.c provides a choice of one of several algorithms for computing the
LSB and LSB versions of the CRC32 checksum based on the parameters
CRC_LE_BITS and CRC_BE_BITS.

In the original version the values 1, 2, 4 and 8 respectively selected
versions of the alrogithm that computed the crc 1, 2, 4 and 32 bits as a
time.

This patch series adds a new version that computes the CRC 64 bits at a
time.  To make things easier to understand the parameter has been
reinterpreted to actually stand for the number of bits processed in each
step of the algorithm so that the old value 8 has been replaced with the
value 32.

This also allows us to add in a widely used crc algorithm that computes
the crc 8 bits at a time called the Sarwate algorithm.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson ce4320ddda crc32: fix mixing of endian-specific types
crc32.c in its original version freely mixed u32, __le32 and __be32 types
which caused warnings from sparse with __CHECK_ENDIAN__.  This patch fixes
these by forcing the types to u32.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson 60e58d5c9d crc32: miscellaneous cleanups
Misc cleanup of lib/crc32.c and related files.

- remove unnecessary header files.

- straighten out some convoluted ifdef's

- rewrite some references to 2 dimensional arrays as 1 dimensional
  arrays to make them correct.  I.e.  replace tab[i] with tab[0][i].

- a few trivial whitespace changes

- fix a warning in gen_crc32tables.c caused by a mismatch in the type of
  the pointer passed to output table.  Since the table is only used at
  kernel compile time, it is simpler to make the table big enough to hold
  the largest column size used.  One cannot make the column size smaller
  in output_table because it has to be used by both the le and be tables
  and they can have different column sizes.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson 3863ef31dc crc32: simplify unit test code
Replace the unit test provided in crc32.c, which doesn't have a makefile
and doesn't compile with current headers, with a simpler self test
routine that also gives a measure of performance and runs at module init
time.  The self test option can be enabled through a configuration
option CONFIG_CRC32_SELFTEST.

The test stresses the pre and post loops and is thus not very realistic
since actual uses will likely have addresses and lengths that are at
least 4 byte aligned.  However, the main loop is long enough so that the
performance is dominated by that loop.

The expected values for crc32_le and crc32_be were generated with the
original version of crc32.c using CRC_BITS_LE = 8 and CRC_BITS_BE = 8.
These values were then used to check all the values of the BITS
parameters in both the original and new versions.

The performance results show some variability from run to run in spite
of attempts to both warm the cache and reduce the amount of OS noise by
limiting interrutps during the test.  To get comparable results and to
analyse options wrt performance the best time reported over a small
sample of runs has been taken.

[djwong@us.ibm.com: Minor changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson fbedceb100 crc32: move long comment about crc32 fundamentals to Documentation/
Move a long comment from lib/crc32.c to Documentation/crc32.txt where it
will more likely get read.

Edited the resulting document to add an explanation of the slicing-by-n
algorithm.

[djwong@us.ibm.com: minor changelog tweaks]
[akpm@linux-foundation.org: fix typo, per George]
Signed-off-by: George Spelvin <linux@horizon.com>
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Bob Pearson e30c7a8fcf crc32: remove two instances of trailing whitespaces
This patchset (re)uses Bob Pearson's crc32 slice-by-8 code to stamp out
a software crc32c implementation.  It removes the crc32c implementation
in crypto/ in favor of using the stamped-out one in lib/.  There is also
a change to Kconfig so that the kernel builder can pick an
implementation best suited for the hardware.

The motivation for this patchset is that I am working on adding full
metadata checksumming to ext4.  As far as performance impact of adding
checksumming goes, I see nearly no change with a standard mail server
ffsb simulation.  On a test that involves only file creation and
deletion and extent tree writes, I see a drop of about 50 pcercent with
the current kernel crc32c implementation; this improves to a drop of
about 20 percent with the enclosed crc32c code.

When metadata is usually a small fraction of total IO, this new
implementation doesn't help much because metadata is usually a small
fraction of total IO.  However, when we are doing IO that is almost all
metadata (such as rm -rf'ing a tree), then this patch speeds up the
operation substantially.

Incidentally, given that iscsi, sctp, and btrfs also use crc32c, this
patchset should improve their speed as well.  I have not yet quantified
that, however.  This latest submission combines Bob's patches from late
August 2011 with mine so that they can be one coherent patch set.
Please excuse my inability to combine some of the patches; I've been
advised to leave Bob's patches alone and build atop them instead.  :/

Since the last posting, I've also collected some crc32c test results on
a bunch of different x86/powerpc/sparc platforms.  The results can be
viewed here: http://goo.gl/sgt3i ; the "crc32-kern-le" and "crc32c"
columns describe the performance of the kernel's current crc32 and
crc32c software implementations.  The "crc32c-by8-le" column shows
crc32c performance with this patchset applied.  I expect crc32
performance to be roughly the same.

The two _boost columns at the right side of the spreadsheet shows how much
faster the new implementation is over the old one.  As you can see, crc32
rises substantially, and crc32c experiences a huge increase.

This patch:

- remove trailing whitespace from lib/crc32.c
- remove trailing whitespace from lib/crc32defs.h

[djwong@us.ibm.com: changelog tweaks]
Signed-off-by: Bob Pearson <rpearson@systemfabricworks.com>
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:37 -07:00
Xiao Guangrong 97e834c504 prio_tree: introduce prio_set_parent()
Introduce prio_set_parent() to abstract the operation which is used to
attach the node to its parent.

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:36 -07:00
Xiao Guangrong 742245d5c2 prio_tree: simplify prio_tree_expand()
In current code, the deleted-node is recorded from first to last,
actually, we can directly attach these node on 'node' we will insert as
the left child, it can let the code more readable.

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:36 -07:00
Xiao Guangrong f35368dd1c prio_tree: cleanup prio_tree_left()/prio_tree_right()
Introduce iter_walk_down()/iter_walk_up() to remove the common code
between prio_tree_left() and prio_tree_right().

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:36 -07:00
Xiao Guangrong f42240d729 prio_tree: remove unnecessary code in prio_tree_replace
Remove the code since 'node' has already been initialized in the begin of
the function

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:36 -07:00
Akinobu Mita f43804bf5f string: memchr_inv() speed improvements
- Generate a 64-bit pattern more efficiently

memchr_inv needs to generate a 64-bit pattern filled with a target
character.  The operation can be done by more efficient way.

- Don't call the slow check_bytes() if the memory area is 64-bit aligned

memchr_inv compares contiguous 64-bit words with the 64-bit pattern as
much as possible.  The outside of the region is checked by check_bytes()
that scans for each byte.  Unfortunately, the first 64-bit word is
unexpectedly scanned by check_bytes() even if the memory area is aligned
to a 64-bit boundary.

Both changes were originally suggested by Eric Dumazet.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:35 -07:00
Cong Wang d314d74c69 nmi watchdog: do not use cpp symbol in Kconfig
ARCH_HAS_NMI_WATCHDOG is a macro defined by arch, but config
HARDLOCKUP_DETECTOR depends on it.  This is wrong, ARCH_HAS_NMI_WATCHDOG
has to be a Kconfig config, and arch's need it should select it
explicitly.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-23 16:58:31 -07:00
Raghavendra K T e335e3eb82 locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage
Get rid of INLINE_SPIN_UNLOCK entirely replacing it with
UNINLINE_SPIN_UNLOCK instead of the reverse meaning.

Whoever wants to change the default spinlock inlining
behavior and uninline the spinlocks for some weird reason,
such as spinlock debugging, paravirt etc. can now all just
select UNINLINE_SPIN_UNLOCK

Original discussion at: https://lkml.org/lkml/2012/3/21/357

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20120322095502.30866.75756.sendpatchset@codeblue
[ tidied up the changelog a bit ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-23 13:18:57 +01:00
Hugh Dickins 9f7de8275b idr: make idr_get_next() good for rcu_read_lock()
Make one small adjustment to idr_get_next(): take the height from the top
layer (stable under RCU) instead of from the root (unprotected by RCU), as
idr_find() does: so that it can be used with RCU locking.  Copied comment
on RCU locking from idr_find().

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-21 17:55:01 -07:00
Linus Torvalds 9f3938346a Merge branch 'kmap_atomic' of git://github.com/congwang/linux
Pull kmap_atomic cleanup from Cong Wang.

It's been in -next for a long time, and it gets rid of the (no longer
used) second argument to k[un]map_atomic().

Fix up a few trivial conflicts in various drivers, and do an "evil
merge" to catch some new uses that have come in since Cong's tree.

* 'kmap_atomic' of git://github.com/congwang/linux: (59 commits)
  feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal
  highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename]
  drbd: remove the second argument of k[un]map_atomic()
  zcache: remove the second argument of k[un]map_atomic()
  gma500: remove the second argument of k[un]map_atomic()
  dm: remove the second argument of k[un]map_atomic()
  tomoyo: remove the second argument of k[un]map_atomic()
  sunrpc: remove the second argument of k[un]map_atomic()
  rds: remove the second argument of k[un]map_atomic()
  net: remove the second argument of k[un]map_atomic()
  mm: remove the second argument of k[un]map_atomic()
  lib: remove the second argument of k[un]map_atomic()
  power: remove the second argument of k[un]map_atomic()
  kdb: remove the second argument of k[un]map_atomic()
  udf: remove the second argument of k[un]map_atomic()
  ubifs: remove the second argument of k[un]map_atomic()
  squashfs: remove the second argument of k[un]map_atomic()
  reiserfs: remove the second argument of k[un]map_atomic()
  ocfs2: remove the second argument of k[un]map_atomic()
  ntfs: remove the second argument of k[un]map_atomic()
  ...
2012-03-21 09:40:26 -07:00
Linus Torvalds 4a52246302 driver core merge for 3.4-rc1
Here's the big driver core merge for 3.4-rc1.
 
 Lots of various things here, sysfs fixes/tweaks (with the nlink breakage
 reverted), dynamic debugging updates, w1 drivers, hyperv driver updates,
 and a variety of other bits and pieces, full information in the
 shortlog.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk9neCsACgkQMUfUDdst+ylyQwCfY2eizvzw5HhjQs8gOiBRDADe
 yrgAnj1Zan2QkoCnQIFJNAoxqNX9yAhd
 =biH6
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches for 3.4-rc1 from Greg KH:
 "Here's the big driver core merge for 3.4-rc1.

  Lots of various things here, sysfs fixes/tweaks (with the nlink
  breakage reverted), dynamic debugging updates, w1 drivers, hyperv
  driver updates, and a variety of other bits and pieces, full
  information in the shortlog."

* tag 'driver-core-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (78 commits)
  Tools: hv: Support enumeration from all the pools
  Tools: hv: Fully support the new KVP verbs in the user level daemon
  Drivers: hv: Support the newly introduced KVP messages in the driver
  Drivers: hv: Add new message types to enhance KVP
  regulator: Support driver probe deferral
  Revert "sysfs: Kill nlink counting."
  uevent: send events in correct order according to seqnum (v3)
  driver core: minor comment formatting cleanups
  driver core: move the deferred probe pointer into the private area
  drivercore: Add driver probe deferral mechanism
  DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers
  w1_bq27000: Only one thread can access the bq27000 at a time.
  w1_bq27000 - remove w1_bq27000_write
  w1_bq27000: remove unnecessary NULL test.
  sysfs: Fix memory leak in sysfs_sd_setsecdata().
  intel_idle: Revert change of auto_demotion_disable_flags for Nehalem
  w1: Fix w1_bq27000
  driver-core: documentation: fix up Greg's email address
  powernow-k6: Really enable auto-loading
  powernow-k7: Fix CPU family number
  ...
2012-03-20 11:16:20 -07:00