Граф коммитов

113 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 65ec0a7d24 This is the bulk of the pin control changes for the v5.13 kernel cycle
Core changes:
 
 - A semantic change to handle pinmux and pinconf in explicit order
   while up until now we depended on the semantic order in the
   device tree. The device tree is a functional programming
   language and does not imply any order, so the right thing is
   for the pin control core to provide these semantics.
 
 - Add a new pinmux-select debugfs file which makes it possible to
   go in and select functions for a pin manually (iteratively, at
   the prompt) for debugging purposes.
 
 - Fixes to gpio regmap handling for a new pin control driver
   making use of regmap-gpio.
 
 - Use octal permissions on debugfs files.
 
 New drivers:
 
 - A massive rewrite of the former custom pin control driver for
   MIPS Broadcom devices to instead use the pin control subsystem.
   New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362,
   BCM6368, BCM63268 and BCM6318 SoC variants are implemented.
 
 - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
   PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs
   on PM8008 are supported.
 
 - Support for the Rockchip RK3568/RK3566 pin controller.
 
 - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and
   X2000.
 
 - Support for Mediatek MTK8195.
 
 - Add a new Xilinx ZynqMP pin control driver.
 
 Driver improvements and non-urgent fixes:
 
 - Modularization and improvements of the Rockchip drivers.
 
 - Some new pins added to the description of new Renesas SoCs.
 
 - Clarifications of the GPIO base calculation in the Intel driver.
 
 - Fix the function names for the MPP54 and MPP55 pins in the Armada
   CP110 pin controller.
 
 - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
 
 - Support for ACPI probing of the Qualcomm SC8180x.
 
 - Fix interrupt clear status on rockchip
 
 - Fix some missing pins on the Ingenic JZ4770, some semantic
   fixes for the behaviour of the Ingenic pin controller.
   Add DMIC pins for JZ4780, X1000, X1500 and X1830.
 
 - A slew of janitorial like of_node_put() calls.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmCL5sAACgkQQRCzN7AZ
 XXNX5RAAtdPvDrPzzWdeqNLyodnJu/SyeA2xbmsvywrSvgpSx3FojFW9AXY/sr7w
 RuhGGA5KhnrovwiabRKoZ0d0lC/JtKdx5g2o9ePFHDy+7BzFnVacBjL38UftSKy0
 4QpDNJ3zock/XTUgJdaJEsbHhP/N4fOF/SbLpguYzGz7JpybNrZ+2M73yeQSL6uE
 yuhn/AgFMLgWS47nSAH91Yt387+XCEfB75nftXyFSN9GpQ9i3VixWsG3Um/Stoma
 aR7IIknvHdpCrOHH1IKohYcdlOkE7Wh2wHXSJVv26M49Ri5KSXu17lsUknebQ/oq
 UeDYdd/2q/wFjxdEbG2tqinEYHs3e1RPmatVesgyibtYHGwjnSFo/G6UtG4948ii
 1exwBi+0fw58YWLu/z4bhnNtZx6VsOev6mJ5GF7pyYzGIJy3r5J/9KCDzOJEoLom
 YTVmgZRjzJuH/i0rPgyg3lSxlP/pdvdk1YUMlIYN1zWdPnRqj7/q+qaxPOkltqD+
 20NFkvhQuuq+dLn4jtNK9xr2+vIKxIRPClT3D/lAihEPC5MUaFw/+y/V7c1hEJfS
 d1dh5DwgHK7i55/lqLFaXeNNYsmY/SiFecoB8xyFnOJFsHlSHe/6NfjmRhOMUn6V
 IX2GG4CBAzaheIWtN/ub/DcQ1vwA2n9hO5WX+Y3CXkIxXUFPmJY=
 =QrEn
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "There is a lot going on!

  Core changes:

   - A semantic change to handle pinmux and pinconf in explicit order
     while up until now we depended on the semantic order in the device
     tree. The device tree is a functional programming language and does
     not imply any order, so the right thing is for the pin control core
     to provide these semantics.

   - Add a new pinmux-select debugfs file which makes it possible to go
     in and select functions for a pin manually (iteratively, at the
     prompt) for debugging purposes.

   - Fixes to gpio regmap handling for a new pin control driver making
     use of regmap-gpio.

   - Use octal permissions on debugfs files.

  New drivers:

   - A massive rewrite of the former custom pin control driver for MIPS
     Broadcom devices to instead use the pin control subsystem. New pin
     control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
     BCM63268 and BCM6318 SoC variants are implemented.

   - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
     in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
     supported.

   - Support for the Rockchip RK3568/RK3566 pin controller.

   - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.

   - Support for Mediatek MTK8195.

   - Add a new Xilinx ZynqMP pin control driver.

  Driver improvements and non-urgent fixes:

   - Modularization and improvements of the Rockchip drivers.

   - Some new pins added to the description of new Renesas SoCs.

   - Clarifications of the GPIO base calculation in the Intel driver.

   - Fix the function names for the MPP54 and MPP55 pins in the Armada
     CP110 pin controller.

   - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.

   - Support for ACPI probing of the Qualcomm SC8180x.

   - Fix interrupt clear status on rockchip

   - Fix some missing pins on the Ingenic JZ4770, some semantic fixes
     for the behaviour of the Ingenic pin controller. Add DMIC pins for
     JZ4780, X1000, X1500 and X1830.

   - A slew of janitorial like of_node_put() calls"

* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: Add Xilinx ZynqMP pinctrl driver support
  firmware: xilinx: Add pinctrl support
  pinctrl: rockchip: do coding style for mux route struct
  pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
  pinctrl: Introduce MODE group in enum pin_config_param
  pinctrl: Keep enum pin_config_param ordered by name
  dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
  pinctrl: core: Fix kernel doc string for pin_get_name()
  pinctrl: mediatek: use spin lock in mtk_rmw
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add pinctrl driver on mt8195
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  pinctrl: Ingenic: Add pinctrl driver for X2000.
  pinctrl: Ingenic: Add pinctrl driver for JZ4775.
  pinctrl: Ingenic: Add pinctrl driver for JZ4755.
  pinctrl: Ingenic: Add pinctrl driver for JZ4750.
  pinctrl: Ingenic: Add pinctrl driver for JZ4730.
  dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
  pinctrl: Ingenic: Reformat the code.
  pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
  ...
2021-04-30 13:04:30 -07:00
Linus Torvalds 37f00ab4a0 ARM: SoC drivers for v5.13
Updates for SoC specific drivers include a few subsystems that
 have their own maintainers but send them through the soc tree:
 
 TEE/OP-TEE:
  -  Add tracepoints around calls to secure world
 
 Memory controller drivers:
  - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
  - Add debug statistics to Tegra20 memory controller
  - Update Tegra bindings and convert to dtschema
 
 ARM SCMI Firmware:
  - Support for modular SCMI protocols and vendor specific extensions
  - New SCMI IIO driver
  - Per-cpu DVFS
 
 The other driver changes are all from the platform maintainers
 directly and reflect the drivers that don't fit into any other
 subsystem as well as treewide changes for a particular platform.
 
 SoCFPGA:
  - Various cleanups contributed by Krzysztof Kozlowski
 
 Mediatek:
  - add MT8183 support to mutex driver
  - MMSYS: use per SoC array to describe the possible routing
  - add MMSYS support for MT8183 and MT8167
  - add support for PMIC wrapper with integrated arbiter
  - add support for MT8192/MT6873
 
 Tegra:
  - Bug fixes to PMC and clock drivers
 
 NXP/i.MX:
  - Update SCU power domain driver to keep console domain power on.
  - Add missing ADC1 power domain to SCU power domain driver.
  - Update comments for single global power domain in SCU power domain
    driver.
  - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
 
 NXP/FSL SoC driver updates for v5.13
  - Add ACPI support for RCPM driver
  - Use generic io{read,write} for QE drivers after performance optimized
    for PowerPC
  - Fix QBMAN probe to cleanup HW states correctly for kexec
  - Various cleanup and style fix for QBMAN/QE/GUTS drivers
 
 OMAP:
  - Preparation to use devicetree for genpd
  - ti-sysc needs iorange check improved when the interconnect target module
    has no control registers listed
  - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
    issues with missing resources and unnecessary deferred probe
  - ti-sysc debug option can now detect more devices
  - ti-sysc now warns if an old incomplete devicetree data is found as we
    now rely on it being complete for am3 and 4
  - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
  - omap-prm driver needs to enable autoidle retention support for omap4
  - omap5 clocks are missing gpmc and ocmc clock registers
  - pci-dra7xx now needs to use builtin_platform_driver instead of using
    builtin_platform_driver_probe for deferred probe to work
 
 Raspberry Pi:
  - Fix-up all RPi firmware drivers so as for unbind to happen in an
    orderly fashion
  - Support for RPi's PoE hat PWM bus
 
 Qualcomm
  - Improved detection for SCM calling conventions
  - Support for OEM specific wifi firmware path
  - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JwACgkQmmx57+YA
 GNkgRg//cBtq2NyDbjiNABxFSkmGCfcc0w0C2wjVzr4cfg6BLTbuvvlpZxI912pu
 P1G2sbsdfQJ8sSeIyZos+PilWK0zHrqlaGZfKI19US45dMjpteDBgsPd7wNZwBjQ
 jbops3YLjztZK1HpY4dIdvMnfxt7yRqhBWaTbPuCwQ35c5KsOM8NHB3cP3BUINWK
 x1uuBCv9svppzwdDiPxneV93WKEzabOUo+WBMPyh5vnyvmW17Iif4BA/VKQxzymm
 mWUi8HHpKBpvntJOKwAD2hnLAdpR3SwX20SLOpyLhnJMotbzNUEqq3LdRxDNPdHk
 ry+rarJ78JGlYfpcfegf2bLf5ITNMfOyRGkjtzeYpcZIXPjufOg9DA9YtAy37k0u
 L0T/9gQ+tQ01WGMca77OyUtIqJKdblZrQMfuH/yGlR99bqFQMV7rNc7GNlX1MXp/
 zw4aOYrRWGtGEeAjx5JJWcYydvMSJpCrqxTz3YhgeJECHB2iA6YkV3NROR4TLW//
 tfxaKqxR/KmSqE6hoVOAuuQ0BLXNlql/+4EE6MKsAOBiKPJclvmJg4CyuY8G21ev
 9Su0zJnXMzai7gNu32v1pizGj26+AOhxCEgAG0mGgk2jlQSn24CKgm5e7kCUewcF
 j/1XksNPT95v/K8MsLpXe5xGvF3jhA1BlFfvjJNZOrcZywBXRxg=
 =iidq
 -----END PGP SIGNATURE-----

Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...
2021-04-26 12:11:52 -07:00
Sai Krishna Potthuri fa989ae7c7 firmware: xilinx: Add pinctrl support
Adding pinctrl support to query platform specific information (pins)
from firmware.

Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1619080202-31924-2-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-04-22 11:12:19 +02:00
Richard Gong 2e8496f31d firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Fixes: 36847f9e3e ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
2021-03-18 09:55:12 -07:00
Nobuhiro Iwamatsu 79bfe480a0 firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)
zynqmp_pm_get_eemi_ops() was removed in commit 4db8180ffe7c: "Firmware: xilinx:
Remove eemi ops for fpga related APIs", but not in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE).
Any driver who want to communicate with PMC using EEMI APIs use the functions provided
for each function
This removed zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE), and also
modify the documentation for this driver.

Fixes: 4db8180ffe ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20210215155849.2425846-1-iwamatsu@nigauri.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-01 12:52:07 +01:00
Linus Torvalds e229b429bb Char/Misc driver patches for 5.12-rc1
Here is the large set of char/misc/whatever driver subsystem updates for
 5.12-rc1.  Over time it seems like this tree is collecting more and more
 tiny driver subsystems in one place, making it easier for those
 maintainers, which is why this is getting larger.
 
 Included in here are:
 	- coresight driver updates
 	- habannalabs driver updates
 	- virtual acrn driver addition (proper acks from the x86
 	  maintainers)
 	- broadcom misc driver addition
 	- speakup driver updates
 	- soundwire driver updates
 	- fpga driver updates
 	- amba driver updates
 	- mei driver updates
 	- vfio driver updates
 	- greybus driver updates
 	- nvmeem driver updates
 	- phy driver updates
 	- mhi driver updates
 	- interconnect driver udpates
 	- fsl-mc bus driver updates
 	- random driver fix
 	- some small misc driver updates (rtsx, pvpanic, etc.)
 
 All of these have been in linux-next for a while, with the only reported
 issue being a merge conflict in include/linux/mod_devicetable.h that you
 will hit in your tree due to the dfl_device_id addition from the fpga
 subsystem in here.  The resolution should be simple.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZf9w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk3xgCcCEN+pCJTum+uAzSNH3YKs/onaDgAnRSVwOUw
 tNW6n1JhXLYl9f5JdhvS
 =MOHs
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc/whatever driver subsystem updates
  for 5.12-rc1. Over time it seems like this tree is collecting more and
  more tiny driver subsystems in one place, making it easier for those
  maintainers, which is why this is getting larger.

  Included in here are:

   - coresight driver updates

   - habannalabs driver updates

   - virtual acrn driver addition (proper acks from the x86 maintainers)

   - broadcom misc driver addition

   - speakup driver updates

   - soundwire driver updates

   - fpga driver updates

   - amba driver updates

   - mei driver updates

   - vfio driver updates

   - greybus driver updates

   - nvmeem driver updates

   - phy driver updates

   - mhi driver updates

   - interconnect driver udpates

   - fsl-mc bus driver updates

   - random driver fix

   - some small misc driver updates (rtsx, pvpanic, etc.)

  All of these have been in linux-next for a while, with the only
  reported issue being a merge conflict due to the dfl_device_id
  addition from the fpga subsystem in here"

* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
  spmi: spmi-pmic-arb: Fix hw_irq overflow
  Documentation: coresight: Add PID tracing description
  coresight: etm-perf: Support PID tracing for kernel at EL2
  coresight: etm-perf: Clarify comment on perf options
  ACRN: update MAINTAINERS: mailing list is subscribers-only
  regmap: sdw-mbq: use MODULE_LICENSE("GPL")
  regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
  regmap: sdw: use _no_pm functions in regmap_read/write
  soundwire: intel: fix possible crash when no device is detected
  MAINTAINERS: replace my with email with replacements
  mhi: Fix double dma free
  uapi: map_to_7segment: Update example in documentation
  uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
  drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
  firewire: replace tricky statement by two simple ones
  vme: make remove callback return void
  firmware: google: make coreboot driver's remove callback return void
  firmware: xilinx: Use explicit values for all enum values
  sample/acrn: Introduce a sample of HSM ioctl interface usage
  virt: acrn: Introduce an interface for Service VM to control vCPU
  ...
2021-02-24 10:25:37 -08:00
Michal Simek 1077d4367a firmware: xilinx: Use explicit values for all enum values
Based on discussion at
https://lore.kernel.org/r/20200318125003.GA2727094@kroah.com we got
recommendation to use explicit values for all enum values.
The patch is following this recommendation.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/daeb67ded45d8a8f6a96717d1fb9c84439dd2ae8.1612361627.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-09 12:11:44 +01:00
Michal Simek 0fc99422bc firmware: xilinx: Remove PM_API_MAX value
There is no reason to keep PM_API_MAX around. The commit acfdd18591
("firmware: xilinx: Use hash-table for api feature check") removed its
usage that's why it is not used anywhere now.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/86e94593a29a1b5b1958c539a1bfabdd08c0948e.1610959734.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-26 19:38:54 +01:00
Mauro Carvalho Chehab e23bd83368 firmware: stratix10-svc: fix kernel-doc markups
There are some common comments marked, instead, with kernel-doc
notation, which won't work.

While here, rename an identifier, in order to match the
function prototype below kernel-doc markup.

Acked-by: Richard Gong <richard.gong@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/02a1eb47767e01e875d8840805b8b2d4f3c6bdee.1610610937.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-01-21 14:06:00 -07:00
Linus Torvalds 48c1c40ab4 ARM: SoC drivers for v5.11
There are a couple of subsystems maintained by other people that
 merge their drivers through the SoC tree, those changes include:
 
  - The SCMI firmware framework gains support for sensor notifications
    and for controlling voltage domains.
 
  - A large update for the Tegra memory controller driver, integrating
    it better with the interconnect framework
 
  - The memory controller subsystem gains support for Mediatek MT8192
 
  - The reset controller framework gains support for sharing pulsed
    resets
 
 For Soc specific drivers in drivers/soc, the main changes are
 
  - The Allwinner/sunxi MBUS gets a rework for the way it handles
    dma_map_ops and offsets between physical and dma address spaces.
 
  - An errata fix plus some cleanups for Freescale Layerscape SoCs
 
  - A cleanup for renesas drivers regarding MMIO accesses.
 
  - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains
 
  - New SoC specific drivers for Aspeed AST2600 LPC bus control
    and SoC identification.
 
  - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660
    and SDX55.
 
  - A rework of the TI AM33xx 'genpd' power domain support to use
    information from DT instead of platform data
 
  - Support for TI AM64x SoCs
 
  - Allow building some Amlogic drivers as modules instead of built-in
 
 Finally, there are numerous cleanups and smaller bug fixes for
 Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
 Renesas, and Xilinx SoCs.
 
 There is a trivial conflict in the cedrus driver, with two branches
 adding the same CEDRUS_CAPABILITY_H265_DEC flag, and another trivial
 remove/remove conflict in linux/dma-mapping.h.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/alSUACgkQmmx57+YA
 GNm7GRAAlNMVi7F0f4Ixf1bEh+J2QUonYIpZfrdxOLFwISGQ+nstGrFW2He/OeQv
 KAi027tZLl6Sdzjy809cLDPA4Z2IKwjVWhEbBHybvy1+irPYjnixtLd0x3YvPhjH
 iadlcjQ3uaGue8PvubK6CVnBEy82A+Pp29n9i4A4wX/8w+BVIhVsxwQWUBF8pFXE
 3La2UZYZMVMvVZMrpTOqwCgdmLDCk+RLMVZ1IiRqBEBq5/DVq03uIXgjGEOrq8tl
 PXC89w7K510Is891mbBdBThQf+pZkU1vwORuknDcEJKWs9ngbEha7ebVgp32kbFl
 pi8DEK205d106WQgfn0Zxkpbsp8XD058wDILwkhBcteXlBaUEL6btGVLDTUCJZuv
 /pkH8tL4lNGpThQFbCEXC8oHZBp2xk55P+SW9RRZOoA5tAp+sz7hlf3y3YKdCSxv
 4xybeeVOAgjl01WtbEC7CuIkqcKVSQ7njhLhC8r5ASteNywDThqxLT6nd0VegcQc
 YH3Eu9QRXpvFwQ35zMkTMWa27bMG5d60fp90bWT0R5amXZpxJJot87w8trFCxv74
 mE5KvCbefCRNsTt8GOBA/WR7hVaG369g07qOvs7g4LjJEM3Nl2h/A4/zVFef9O0t
 yq3Nm4YCGfDSAQXzGR2SJ3nxiqbDknzJTAtZPf4BmbaMuPOIJ5k=
 =BjJf
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "There are a couple of subsystems maintained by other people that merge
  their drivers through the SoC tree, those changes include:

   - The SCMI firmware framework gains support for sensor notifications
     and for controlling voltage domains.

   - A large update for the Tegra memory controller driver, integrating
     it better with the interconnect framework

   - The memory controller subsystem gains support for Mediatek MT8192

   - The reset controller framework gains support for sharing pulsed
     resets

  For Soc specific drivers in drivers/soc, the main changes are

   - The Allwinner/sunxi MBUS gets a rework for the way it handles
     dma_map_ops and offsets between physical and dma address spaces.

   - An errata fix plus some cleanups for Freescale Layerscape SoCs

   - A cleanup for renesas drivers regarding MMIO accesses.

   - New SoC specific drivers for Mediatek MT8192 and MT8183 power
     domains

   - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
     identification.

   - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
     SDX55.

   - A rework of the TI AM33xx 'genpd' power domain support to use
     information from DT instead of platform data

   - Support for TI AM64x SoCs

   - Allow building some Amlogic drivers as modules instead of built-in

  Finally, there are numerous cleanups and smaller bug fixes for
  Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
  Renesas, and Xilinx SoCs"

* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
  soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message
  clk: samsung: mark PM functions as __maybe_unused
  soc: samsung: exynos-chipid: initialize later - with arch_initcall
  soc: samsung: exynos-chipid: order list of SoCs by name
  memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
  memory: ti-emif-sram: only build for ARMv7
  memory: tegra30: Support interconnect framework
  memory: tegra20: Support hardware versioning and clean up OPP table initialization
  dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
  soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
  reset-controller: ti: force the write operation when assert or deassert
  ...
2020-12-16 16:38:41 -08:00
Arnd Bergmann 629c96256d arm64: soc: ZynqMP SoC changes for v5.11 v2
- Small alignments in Xilinx Firmware driver
 - Exposing syscon interface for VCU driver
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX9EZfQAKCRDKSWXLKUoM
 ITiBAJ0aVgRmD3jMhgywfNNK0nz3kLP7DwCeM6+amR7DvPJV3R+vev+P4yUPC40=
 =lqJA
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-soc-for-v5.11-v2' of https://github.com/Xilinx/linux-xlnx into arm/drivers

arm64: soc: ZynqMP SoC changes for v5.11 v2

- Small alignments in Xilinx Firmware driver
- Exposing syscon interface for VCU driver

* tag 'zynqmp-soc-for-v5.11-v2' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Properly align function parameter
  firmware: xilinx: Add a blank line after function declaration
  firmware: xilinx: Remove additional newline
  firmware: xilinx: Fix kernel-doc warnings
  firmware: xlnx-zynqmp: fix compilation warning
  soc: xilinx: vcu: add missing register NUM_CORE
  soc: xilinx: vcu: use vcu-settings syscon registers
  dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
  soc: xilinx: vcu: drop useless success message

Link: https://lore.kernel.org/r/71d38756-4456-29fc-26a3-341e1d09aafe@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09 20:37:13 +01:00
Michal Simek 311c2520de firmware: xilinx: Properly align function parameter
Fix parameters alignment reported by checkpatch --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/00ed9fcb94a6c22eff1fe8afdea46b2764a8687d.1606894725.git.michal.simek@xilinx.com
2020-12-09 19:36:34 +01:00
Michal Simek a80cefec2c firmware: xilinx: Add a blank line after function declaration
Fix all these issues which are also reported by checkpatch --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/7b6007e05f6c01214861a37f198cd5bee62a4d3e.1606894725.git.michal.simek@xilinx.com
2020-12-09 19:36:34 +01:00
Michal Simek 1f6a11a010 firmware: xilinx: Remove additional newline
This additional newline is useless and also reported by checkpatch
--strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d927f3f2c97910958dd77a22828cd0bf8d89c9de.1606894725.git.michal.simek@xilinx.com
2020-12-09 19:36:34 +01:00
Wendy Liang 463edf5a59 firmware: xlnx-zynqmp: fix compilation warning
Fix compilation warning when ZYNQMP_FIRMWARE is not defined.

include/linux/firmware/xlnx-zynqmp.h: In function
'zynqmp_pm_get_eemi_ops':
 include/linux/firmware/xlnx-zynqmp.h:363:9: error: implicit
 declaration of function 'ERR_PTR'
 [-Werror=implicit-function-declaration]
     363 |  return ERR_PTR(-ENODEV);

include/linux/firmware/xlnx-zynqmp.h:363:18: note: each undeclared
identifier is reported only once for each function it appears in
   include/linux/firmware/xlnx-zynqmp.h: In function
'zynqmp_pm_get_api_version':
   include/linux/firmware/xlnx-zynqmp.h:367:10: error: 'ENODEV'
undeclared (first use in this function)
     367 |  return -ENODEV;
         |          ^~~~~~

Signed-off-by: Wendy Liang <wendy.liang@xilinx.com>
Link: https://lore.kernel.org/r/1606205898-12642-1-git-send-email-wendy.liang@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-12-09 19:36:34 +01:00
Amit Sunil Dhamne acfdd18591 firmware: xilinx: Use hash-table for api feature check
Currently array of fix length PM_API_MAX is used to cache
the pm_api version (valid or invalid). However ATF based
PM APIs values are much higher then PM_API_MAX.
So to include ATF based PM APIs also, use hash-table to
store the pm_api version status.

Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Fixes: f3217d6f2f ("firmware: xilinx: fix out-of-bounds access")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-24 15:13:54 +01:00
Daniel Baluta 23d89aa0c2 firmware: imx-dsp: Export functions to request/free channels
In order to save power, we only need to request a channel
when the communication with the DSP active.

For this we export the following functions:
	- imx_dsp_request_channel, gets a channel with a given index
	- imx_dsp_free_channel, frees a channel with a given index

Notice that we still request channels at probe to support devices
that do not have PM callbacks implemented.

More explanations about why requesting a channel has an effect
on power savings:
 - requesting an mailbox channel will call mailbox's startup
   function.
 - startup function calls pm_runtime_get_sync which increments device
   usage count and will keep the device active. Specifically, mailbox
   clock will be always ON when a mailbox channel is requested.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-11-16 16:33:48 +08:00
Peng Fan 95de5094f5 firmware: imx: add dummy functions
add dummy functions to avoid build failure when header files
are included, but drivers are not built.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-28 16:59:40 +08:00
Linus Torvalds 1785d11612 Char/Misc driver patches for 5.9-rc1
Here is the large set of char and misc and other driver subsystem
 patches for 5.9-rc1.  Lots of new driver submissions in here, and
 cleanups and features for existing drivers.
 
 Highlights are:
 	- habanalabs driver updates
 	- coresight driver updates
 	- nvmem driver updates
 	- huge number of "W=1" build warning cleanups from Lee Jones
 	- dyndbg updates
 	- virtbox driver fixes and updates
 	- soundwire driver updates
 	- mei driver updates
 	- phy driver updates
 	- fpga driver updates
 	- lots of smaller individual misc/char driver cleanups and fixes
 
 Full details are in the shortlog.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
 Vjf4rKM73GC11bVF4Gyy
 =Xq1R
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  patches for 5.9-rc1. Lots of new driver submissions in here, and
  cleanups and features for existing drivers.

  Highlights are:
   - habanalabs driver updates
   - coresight driver updates
   - nvmem driver updates
   - huge number of "W=1" build warning cleanups from Lee Jones
   - dyndbg updates
   - virtbox driver fixes and updates
   - soundwire driver updates
   - mei driver updates
   - phy driver updates
   - fpga driver updates
   - lots of smaller individual misc/char driver cleanups and fixes

  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
  habanalabs: remove unused but set variable 'ctx_asid'
  nvmem: qcom-spmi-sdam: Enable multiple devices
  dt-bindings: nvmem: SID: add binding for A100's SID controller
  nvmem: update Kconfig description
  nvmem: qfprom: Add fuse blowing support
  dt-bindings: nvmem: Add properties needed for blowing fuses
  dt-bindings: nvmem: qfprom: Convert to yaml
  nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
  nvmem: core: add support to auto devid
  nvmem: core: Add nvmem_cell_read_u8()
  nvmem: core: Grammar fixes for help text
  nvmem: sc27xx: add sc2730 efuse support
  nvmem: Enforce nvmem stride in the sysfs interface
  MAINTAINERS: Add git tree for NVMEM FRAMEWORK
  nvmem: sprd: Fix return value of sprd_efuse_probe()
  drivers: android: Fix the SPDX comment style
  drivers: android: Fix a variable declaration coding style issue
  drivers: android: Remove braces for a single statement if-else block
  drivers: android: Remove the use of else after return
  drivers: android: Fix a variable declaration coding style issue
  ...
2020-08-05 11:43:47 -07:00
Anson Huang a24015fa8b firmware: imx: Move i.MX SCU soc driver into imx firmware folder
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13 10:02:00 +08:00
Richard Gong bf0e5bf68a firmware: stratix10-svc: extend svc to support new RSU features
Extend Intel Stratix10 service layer driver to support new RSU DCMF
versions and max retry parameter.

DCMF = Decision Configuration Management Firmware. The max retry parameter
is the maximum times the images is allowed to reload itself before giving
up and starting RSU failover flow.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-3-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02 14:48:48 +02:00
Richard Gong 36847f9e3e firmware: stratix10-svc: correct reconfig flag and timeout values
Correct the incorrect flag value for COMMAND_RECONFIG_FLAG_PARTIAL and
increase FPGA reconfig timeout values so that Intel service layer and
FPGA manager drivers can work with all versions of firmware.

Signed-off-by: Richard Gong <richard.gong@intel.com>
Link: https://lore.kernel.org/r/1592231348-31334-2-git-send-email-richard.gong@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-02 14:48:47 +02:00
Peng Fan 169caf6925 firmware: imx: add resource management api
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.

Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-23 15:37:56 +08:00
Linus Torvalds 9aa900c809 Char/Misc driver patches for 5.8-rc1
Here is the large set of char/misc driver patches for 5.8-rc1
 
 Included in here are:
 	- habanalabs driver updates, loads
 	- mhi bus driver updates
 	- extcon driver updates
 	- clk driver updates (approved by the clock maintainer)
 	- firmware driver updates
 	- fpga driver updates
 	- gnss driver updates
 	- coresight driver updates
 	- interconnect driver updates
 	- parport driver updates (it's still alive!)
 	- nvmem driver updates
 	- soundwire driver updates
 	- visorbus driver updates
 	- w1 driver updates
 	- various misc driver updates
 
 In short, loads of different driver subsystem updates along with the
 drivers as well.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
 i5RblCmcVMqvHaGtYkY+
 =tScN
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...
2020-06-07 10:59:32 -07:00
Arnd Bergmann 7b972f3830 i.MX drivers update for 5.8:
- Optimize imx-scu driver to use one TX and one RX instead of four for
   talking to SCU.
 - Fix one possible message header corruption where the response is
   longer than the request.
 - Move System Control defines into dt-bindings header, so that DT can
   use them as well.
 - A couple of small fixups.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl7IeuUUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM5CpAf/VV2krqXlgTXA1Ppl+ivdGkx9ntwo
 dVtZYNr65Z1iqp6yujW7cH/qulXfkaFanwDptq9ulBkG6uiyV06GCtBxpp3VhNOB
 60uaS8RsieYmCz3e8j4kZkMCBthpD72wt0DxF1TlJu2d/cWfsM4/bMbrx0qYiT0V
 J5FqcGH0xbe+E5YITdoPQbNxEig49q2P6BhkNLQelVQtVgM0lwSpDX3WRpCizch4
 bbKSVYudV/rGGPM7ZYM53N+ngwKZurRbIf7br1QgA4ZlQxdCtADB6IRd2RsfrC8P
 4BizRONfh46ogrnb9/P951RZu9H7VFRkTurnXdU+NcFK8HPYDGQmm7P2SQ==
 =cJwM
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX drivers update for 5.8:

- Optimize imx-scu driver to use one TX and one RX instead of four for
  talking to SCU.
- Fix one possible message header corruption where the response is
  longer than the request.
- Move System Control defines into dt-bindings header, so that DT can
  use them as well.
- A couple of small fixups.

* tag 'imx-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  firmware: imx: scu: Fix possible memory leak in imx_scu_probe()
  dt-bindings: firmware: imx: Add more system controls and PM clock types
  dt-bindings: firmware: imx: Move system control into dt-binding headfile
  firmware: imx: scu: Fix corruption of header
  firmware: imx-scu: Support one TX and one RX
  soc: imx8m: No need to put node when of_find_compatible_node() failed

Link: https://lore.kernel.org/r/20200523032516.11016-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-26 00:00:47 +02:00
Dong Aisheng 755a739794 dt-bindings: firmware: imx: Move system control into dt-binding headfile
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-05-13 16:19:23 +08:00
Dmitry Osipenko b720aaa347 firmware: tf: Different way of L2 cache enabling after LP2 suspend
ASUS TF300T device may not work properly if firmware is asked to fully
re-initialize L2 cache after resume from LP2 suspend. The downstream
kernel of TF300T uses different opcode to enable cache after resuming
from LP2, this opcode also works fine on Nexus 7 and Ouya devices.
Supposedly, this may be needed by an older firmware versions.

Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-05-06 18:27:26 +02:00
Rajan Vaja a2cc220a9a firmware: xilinx: Add sysfs and API to set boot health status
Add sysfs interface to set boot health status from user space.
Add API used by this interface to communicate with firmware.

If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-26-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja b3ae24c448 firmware: xilinx: Add sysfs to set shutdown scope
The Linux shutdown functionality implemented via PSCI system_off does
not include an option to set a scope, i.e. which parts of the system to
shut down.

This patch creates sysfs that allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the platform
specific portion of PSCI-system_off can use the chosen shutdown scope.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-25-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja fdd2ed88ca firmware: xilinx: Add system shutdown API interface
Add system shutdown API interface which asks firmware to
perform system shutdown/restart.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-24-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja ae5c961da6 firmware: xilinx: Add sysfs interface
Add firmware-ggs sysfs interface which provides read/write
interface to global storage registers.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-23-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja 4f680b72ea firmware: xilinx: Add APIs to read/write GGS/PGGS registers
Add APIs to read/write PGGS and GGS registers.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-22-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:46:54 +02:00
Rajan Vaja 4db8180ffe firmware: xilinx: Remove eemi ops for fpga related APIs
Use direct function call instead of using eemi ops for fpga related
APIs. Also remove eemi ops structure.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-21-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja bc86f9c546 firmware: xilinx: Remove eemi ops for aes engine
Use direct function call for aes engine instead of using eemi ops.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-20-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja cbbbda71fe firmware: xilinx: Remove eemi ops for set_requirement
Use direct function call instead of using eemi ops for
set_requirement.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-19-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja 07fb1a4619 firmware: xilinx: Remove eemi ops for release_node
Use direct function call instead of using eemi ops for release_node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-18-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja bf8b27ed23 firmware: xilinx: Remove eemi ops for request_node
Use direct function call instead of using eemi ops for request_node.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-17-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:09 +02:00
Rajan Vaja 951d0a97e4 firmware: xilinx: Remove eemi ops for set_suspend_mode
Use direct function call instead of eemi ops for set_suspend_mode.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-16-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja 9474da950d firmware: xilinx: Remove eemi ops for init_finalize
Use direct function call instead of eemi ops for init_finalize.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-15-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja 1b413581fe firmware: xilinx: Remove eemi ops for reset_get_status
Use direct function call instead of using eemi ops for
reset_get_status.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-14-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja cf23ec3531 firmware: xilinx: Remove eemi ops for reset_assert
Use direct function call instead of using eemi ops for
reset_assert.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-13-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja 426c8d85df firmware: xilinx: Use APIs instead of IOCTLs
Remove IOCTL API and use individual APIs for better readability.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-12-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja 70c0d36462 firmware: xilinx: Remove eemi ops for clock set/get parent
Use direct function call instead of eemi ops for clock set/get parent.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-11-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:08 +02:00
Rajan Vaja 7a1e10621a firmware: xilinx: Remove eemi ops for clock set/get rate
Use direct function call instead of eemi ops for clock set/get rate.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-10-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja 0667a8d144 firmware: xilinx: Remove eemi ops for clock_getdivider
Use direct function call instead of using eemi ops for
clock_getdivider.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-9-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja fc9fb8fb98 firmware: xilinx: Remove eemi ops for clock_setdivider
Use direct function call instead of using eemi ops for
clock_setdivider.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-8-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja 5e76731dd3 firmware: xilinx: Remove eemi ops for clock_getstate
Use direct function call instead of eemi ops for clock_getstate.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-7-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja f5ccd54b67 firmware: xilinx: Remove eemi ops for clock_disable
Use direct function call for clock_disable instead using of eemi ops.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-6-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja 3637e84cd2 firmware: xilinx: Remove eemi ops for clock_enable
Use direct function call for clock_enable instead of eemi ops.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-5-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:07 +02:00
Rajan Vaja 6366c1bac3 firmware: xilinx: Remove eemi ops for query_data
Use direct function call for query_data instead of using eemi ops.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Jolly Shah <jolly.shah@xilinx.com>
Link: https://lore.kernel.org/r/1587761887-4279-4-git-send-email-jolly.shah@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28 15:45:06 +02:00