Граф коммитов

49649 Коммитов

Автор SHA1 Сообщение Дата
Sam Bobroff e594a5e349 drm/ast: Fix connector leak during driver unload
When unloading the ast driver, a warning message is printed by
drm_mode_config_cleanup() because a reference is still held to one of
the drm_connector structs.

Correct this by calling drm_crtc_force_disable_all() in
ast_fbdev_destroy().

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e613f3c630c7bbc72e04a44b178259b9164d2f6.1543798395.git.sbobroff@linux.ibm.com
2018-12-06 14:12:02 +10:00
Dave Airlie 6ccd895e41 UAPI:
- Distinguish lease events from hotplug (Daniel)
 
 Other:
 - omap: Restore panel-dpi bus flags (Tomi)
 - omap: Fix a couple of dsi issues (Sebastian)
 
 Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
 Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
 Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlwIMQ4ACgkQlvcN/ahK
 BwphDwf/a4gL0Dfw/QiCt2RndGtFsVVJPeByZXKv2puQAM/2f66PrtxRkmqulSyW
 gUTBuyUSgMjNKXY5bhRDDfxKP2tshKjzGfFvd+j7U4X4reGAK7lksV0m2+S9xp1M
 GP+RiUKCXySbMyjLM4VwvvYWYDU0xRo+YUhwkWuhJqgra223HfoO5BSBLQwQvVss
 4CCMyEL/gN0axasj82hu+9g0pIIrWeP9sAUIkX+jnSJRp3J6ZixH904EKbf1wNqZ
 EEwnQ7t8x0OSYFHY+Q3YIS35f+NskpkDrCjYX0Tq0TVZih1CU4Bx21e6Epk2BZeR
 NDTjFv2ERUYv5n1DF4alMSbFFiuotg==
 =W8Lu
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2018-12-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

UAPI:
- Distinguish lease events from hotplug (Daniel)

Other:
- omap: Restore panel-dpi bus flags (Tomi)
- omap: Fix a couple of dsi issues (Sebastian)

Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205201428.GA35447@art_vandelay
2018-12-06 14:09:57 +10:00
Dave Airlie c6c2097a19 Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.20:
- Fix banding regression on 6 bpc panels
- Vega20 fix for six 4k displays
- Fix LRU handling in ttm_buffer_object_transfer
- Use proper MC firmware for newer polaris variants
- Vega20 powerplay fixes
- VCN suspend/resume fix for PCO
- Misc other fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181205192934.2857-1-alexander.deucher@amd.com
2018-12-06 14:08:50 +10:00
James Zhu 0a9b89b2e2 drm/amdgpu/vcn: Update vcn.cur_state during suspend
Replace vcn_v1_0_stop with vcn_v1_0_set_powergating_state during suspend,
to keep adev->vcn.cur_state update. It will fix VCN S3 hung issue.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-05 14:12:02 -05:00
Nicholas Kazlauskas 090afc1e40 drm/amd/display: Fix overflow/truncation from strncpy.
[Why]

New GCC warnings for stringop-truncation and stringop-overflow help
catch common misuse of strncpy. This patch suppresses these warnings
by fixing bugs identified by them.

[How]

Since the parameter passed for name in amdpgu_dm_create_common_mode has
no fixed length, if the string is >= DRM_DISPLAY_MODE_LEN then
mode->name will not be null-terminated.

The truncation in fill_audio_info won't actually occur (and the string
will be null-terminated since the buffer is initialized to zero), but
the warning can be suppressed by using the proper buffer size.

This patch fixes both issues by using the real size for the buffer and
making use of strscpy (which always terminates).

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04 15:01:56 -05:00
tianci yin 1b3b27b2a1 drm/amd/powerplay: improve OD code robustness
add protection code to avoid lower frequency trigger over drive.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04 15:01:37 -05:00
wentalou 4944af670b drm/amdgpu: enlarge maximum waiting time of KIQ
KIQ in VF’s init delayed by another VF’s reset,
which would cause late_init failed occasionally.
MAX_KIQ_REG_TRY enlarged from 20 to 80 would fix this issue.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-04 15:01:20 -05:00
Wei Yongjun b31a3ca745 drm/fb-helper: Fix typo in parameter description
Fix typo in parameter description.

Fixes: 4be9bd10e2 ("drm/fb_helper: Allow leaking fbdev smem_start")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
2018-12-04 14:22:20 +01:00
Evan Quan 106ea7feb9 drm/amd/powerplay: support SoftMin/Max setting for some specific DPM
For some case, no need to force SoftMin/Max settings for all DPMs.
It's OK to force on some specific DPM only.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03 11:40:21 -05:00
Evan Quan 10cb3e6b63 drm/amd/powerplay: issue pre-display settings for display change event
For display config change event only, pre-display config settings are
needed.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03 11:40:20 -05:00
Evan Quan f02be8279a drm/amd/powerplay: support new pptable upload on Vega20
New pptable upload through sysfs interface is supported.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-12-03 11:40:20 -05:00
Alex Deucher b52b6738cc drm/amdgpu/gmc8: always load MC firmware in the driver
Some power features rely on the driver loaded version so always
load the MC firmware from the driver even if the vbios loaded
a version already.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-12-03 11:40:14 -05:00
Alex Deucher a81a7c9c9e drm/amdgpu/gmc8: update MC firmware for polaris
Some variants require different MC firmware images.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-12-03 11:40:01 -05:00
Junwei Zhang d7fd67653f drm/amdgpu: update mc firmware image for polaris12 variants
Some new variants require updated firmware.

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-12-03 09:55:52 -05:00
Wen Yang 098336deb9 drm/msm: Fix error return checking
The error checks on ret for a negative error return always fails because
the return value of iommu_map_sg() is unsigned and can never be negative.

Detected with Coccinelle:
drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression
compared with zero: ret < 0

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
CC: Rob Clark <robdclark@gmail.com>
CC: David Airlie <airlied@linux.ie>
CC: Julia Lawall <julia.lawall@lip6.fr>
CC: linux-arm-msm@vger.kernel.org
CC: dri-devel@lists.freedesktop.org
CC: freedreno@lists.freedesktop.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:14 -05:00
Jayant Shekhar d9a75a6201 drm/msm/dpu: Ignore alpha for XBGR8888 format
Alpha enable in the pixel format will help in
selecting the blend rule. By keeping alpha enable
to true we are allowing foreground alpha to blend
with the layer. If alpha is don't care, then we
should not allow pixel alpha to be part of blend
equation.

Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:14 -05:00
YueHaibing ce25aa3ee6 drm/msm: dpu: Fix "WARNING: invalid free of devm_ allocated data"
'dpu_enc' is a member of 'drm_enc'
And 'drm_enc' got allocated with devm_kzalloc in dpu_encoder_init.

This gives this error message:
./drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c:459:1-6:
 WARNING: invalid free of devm_ allocated data

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:14 -05:00
YueHaibing 671465198e drm/msm/hdmi: Drop pointless static qualifier in msm_hdmi_bind()
There is no need to have the 'struct hdmi_platform_config *hdmi_cfg'
variable static since new value always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:14 -05:00
Robert Foss 2189463dba drm/msm: Move fence put to where failure occurs
If dma_fence_wait fails to wait for a supplied in-fence in
msm_ioctl_gem_submit, make sure we release that in-fence.

Also remove this dma_fence_put() from the 'out' label.

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:13 -05:00
Sean Paul 081679c51e drm/msm: dpu: Don't set legacy plane->crtc pointer
It causes a WARN in drm_atomic_get_plane_state(), and is not used by
atomic (or dpu).

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-03 08:46:13 -05:00
Jordan Crouse d52900437e drm/msm/gpu: Don't map command buffers with nr_relocs equal to 0
If a command buffer doesn't have any relocs assigned to it there then
is no need to map it in the kernel address space.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:13 -05:00
Todor Tomov ee44563596 drm/msm/hdmi: Enable HPD after HDMI IRQ is set up
SoCs that contain MDP5 have a top level wrapper called MDSS that
manages locks, power and irq for the sub-blocks within it.

Irq for HDMI is also routed through the MDSS.

Shortly after the Hot Plug Detection (HPD) is enabled in HDMI,
HDMI interrupts are recieved by the MDSS interrupt handler.
However at this moment the HDMI irq is still not mapped to
the MDSS irq domain so the HDMI irq handler cannot be called
to process the interrupts.

This leads to a flood of HDMI interrupts on CPU 0.

If we are lucky to have the HDMI initialization running on a
different CPU, it will eventually map the HDMI irq to MDSS irq
domain, the next HDMI interrupt will be handled by the HDMI irq
handler, the interrupt flood will stop and we will recover.

If the HDMI initialization is running on CPU 0, then it cannot
complete and there is nothing to stop the interrupt flood on
CPU 0. The system is stuck.

Fix this by moving the HPD enablement after the HDMI irq is
mapped to the MDSS irq domain.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:13 -05:00
Jeykumar Sankaran 7f9743abaa drm/msm: validate display and event threads
While creating display and event threads per crtc, validate
them before setting their priorities.

changes in v2:
	- use dev_warn (Abhinav Kumar)
changes in v3:
	- fix compilation error
changes in v4:
	- Remove Change-Id (Sean Paul)
	- Keep logging within 80 char limit (Sean Paul)

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-12-03 08:46:07 -05:00
Sebastian Reichel 3c613a3bdd drm/omap: fix incorrect union usage
The DSI encoder sets dssdev->ops->dsi.set_config, which is stored at the
same offset as dssdev->ops->hdmi.set_hdmi_mode. The code in omap_encoder
only checks if dssdev->ops->hdmi.set_hdmi_mode is NULL. Due to the way
union works, it won't be NULL if dsi.set_config is set. This means
dsi_set_config will be called with config=hdmi_mode=false=NULL parameter
resulting in a NULL dereference. Also the dereference happens while
console is locked, so kernel hangs without any debug output without
"fb.lockless_register_fb=1" parameter.

This restructures the code, so that the HDMI mode is only configured
for HDMI output types.

Fixes: 83910ad3f5 ("drm/omap: Move most omap_dss_driver operations to omap_dss_device_ops")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Tony Lindgren <tony@atomide.com>
[tomi.valkeinen@ti.com: dropped the safeguard]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-5-sebastian.reichel@collabora.com
2018-12-03 14:46:30 +02:00
Sebastian Reichel 0a02d49553 drm/omap: populate DSI platform bus earlier
After the changes from 4.20 the DSI encoder tries to find the
attached panel before populating the DSI bus. If the panel is
not found -EPROBE_DEFER is returned, so the DSI bus is never
populated and the panel never added.

Fix this by populating the DSI bus before searching for the
video sink in dsi_init_output().

Fixes: 27d624527d ("drm/omap: dss: Acquire next dssdev at probe time")
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com
2018-12-03 14:46:30 +02:00
Tomi Valkeinen 0a7f54ea0e drm/omap: fix bus_flags for panel-dpi
panel-dpi used to convey the bus-flags via the videomode, but recent
changes changed the use of videomode to DRM's drm_display_mode which
does not contain bus-flags. This broke panel-dpi, which didn't
explicitly store the bus-flags into dssdev->bus_flags.

Fix this by setting dssdev->bus_flags. Also change the bus_flags type to
u32, as that is the type used in the DRM framework, and we would get a
warning with drm_bus_flags_from_videomode() otherwise.

Fixes: 3fbda31e81 ("drm/omap: Split mode fixup and mode set from encoder enable")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126092447.11864-1-tomi.valkeinen@ti.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-12-03 14:36:05 +02:00
Christian König 3bfa8897e4 drm/amdgpu: wait for IB test on first device open
Instead of delaying that to the first query. Otherwise we could try to use the
SDMA for VM updates before the IB tests are done.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30 12:12:17 -05:00
Alex Deucher f10d9102de drm/amdgpu: add VCN JPEG support amdgpu_ctx_num_entities
Looks like it was missed when setting support was added.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30 12:12:16 -05:00
Christian König d6e820fcd4 drm/ttm: fix LRU handling in ttm_buffer_object_transfer
We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.

When it is added to the LRU we can run into a race between destroying
and evicting it again.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-30 12:12:16 -05:00
Sean Paul 3b712e43e3 drm/msm: Grab a vblank reference when waiting for commit_done
Similar to the atomic helpers, we should enable vblank while we're
waiting for the commit to finish. DPU needs this, MDP5 seems to work
fine without it.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-11-30 11:58:03 -05:00
Abhinav Kumar 8531f0587f drm/msm/dsi: configure VCO rate for 10nm PLL driver
Currenty the VCO rate in the 10nm PLL driver relies
on the parent rate which is not configured.

Configure the VCO rate to 19.2 Mhz as required by
the 10nm PLL driver.

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-11-30 11:57:53 -05:00
Rob Clark 47e7f506ee drm/msm: fix handling of cmdstream offset
Userspace hasn't used submit cmds with submit_offset != 0 for a while,
but this starts cropping up again with cmdstream sub-buffer-allocation
in libdrm_freedreno.

Doesn't do much good to increment the buf ptr before assigning it.

Fixes: 78b8e5b847 drm/msm: dump a rd GPUADDR header for all buffers in the command
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30 11:38:45 -05:00
Dan Carpenter 51270de914 drm/msm/gpu: Fix a couple memory leaks in debugfs
The msm_gpu_open() function should free "show_priv" on error or it
causes static checker warnings.

Fixes: 4f776f4511 ("drm/msm/gpu: Convert the GPU show function to use the GPU state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30 11:34:44 -05:00
Sharat Masetty 482f96324a drm/msm: Fix task dump in gpu recovery
The current recovery code gets a pointer to the task struct and does a
few things all within the rcu_read_lock. This puts constraints on the
types of gfp flags that can be used within the rcu lock. This patch
instead gets a reference to the task within the rcu lock and releases
the lock immediately, this way the task stays afloat until we need it and
we also get to use the desired gfp flags.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30 11:34:23 -05:00
Sharat Masetty 4f3a31a8e8 drm/msm: Check if target supports crash dump capture
This patch simply checks first to see if the target can support crash dump
capture before proceeding.

Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-30 11:33:54 -05:00
Sandeep Panda 4265b0fe45 drm/bridge: fix AUX_CMD_SEND bit value for ti, sn65dsi86 bridge
Fix the AUX_CMD_SEND bit for ti,sn65dsi86 bridge chip. With wrong
value the dpcd aux transactions with eDP panel are failing.

Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130092745.4219-1-spanda@codeaurora.org
2018-11-30 10:45:06 -05:00
Daniel Vetter ce85882860 drm/lease: Send a distinct uevent
Sending the exact same hotplug event is not great uapi. Luckily the
only already merged implementation of leases (in the -modesetting
driver) doesn't care about what kind of uevent it gets, and
unconditionally processes both hotplug and lease changes. So we can
still adjust the uapi here.

But e.g. weston tries to filter stuff, and I guess others might want
to do that too. Try to make that possible. Cc: stable since it's uapi
adjustement that we want to roll out everywhere.

Michel Dänzer mentioned on irc that -amdgpu also has lease support. It
has the same code flow as -modesetting though, so we can still go
ahead.

v2: Mention -amdgpu (Michel)

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129094226.30591-1-daniel.vetter@ffwll.ch
2018-11-30 10:57:18 +01:00
Roman Li c6888879fd drm/amd/display: Fix 6x4K displays light-up on Vega20 (v2)
[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.

[How]
Update min_dcfclock_khz based on min_engine_clock value.

v2: backport to 4.20 (Alex)

Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-29 14:36:03 -05:00
Nicholas Kazlauskas 49f1c44b58 drm/amd/display: Fix unintialized max_bpc state values
[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.

Banding occurs for these displays.

[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.

Bugzilla: https://bugs.freedesktop.org/108825
Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-29 14:11:10 -05:00
Dave Airlie ebcdcef303 - mst: Don't try to validate ports while destroying them (Lyude)
- Revert: Don't try to validate ports while destroying them (Lyude)
 - core: Don't set device to master unless set_master succeeds (Sergio)
 - meson: Do vblank_on/off on enable/disable (Neil)
 - meson: Use fast_io regmap option to avoid sleeping in irq ctx (Lyude)
 - meson: Don't walk off the end of the OSD EOTF LUTs (Lyude)
 
 Cc: Lyude Paul <lyude@redhat.com>
 Cc: Sergio Correia <sergio@correia.cc>
 Cc: Neil Armstrong <narmstrong@baylibre.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlv/CEwACgkQlvcN/ahK
 Bwq5ewgAjvVOFwA1hhBH9tdtreAyqjYZV6RjQFxWznMiVbI8JDG95Xr81SORoCgA
 zi/XSX98u3YnV8C1YXfuL3FxMGNV69Jjx4ZNDzybrV5Namkcr8CBf31mx46mjzMP
 4YxfdVEHejlaZEmlm+IK5hJULgwObBwcZL3NmxSh31Uf3EFIIfBIYnE6J5sxLpCu
 y/LpGUTQqiIvT25ZG06rlUkCeFE4aO9PeTP7Ema7FoV7aXl7iO/n790r/9yIdrsD
 ft5Ybuug49cdsSj0jGJuNGcHwHXScN5xHKHN+/BHQySukTyYGgRJQd8X23TiI06F
 BJvU1mRKElfO2JtswGga3uIWgEoXXA==
 =SYWR
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2018-11-28-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- mst: Don't try to validate ports while destroying them (Lyude)
- Revert: Don't try to validate ports while destroying them (Lyude)
- core: Don't set device to master unless set_master succeeds (Sergio)
- meson: Do vblank_on/off on enable/disable (Neil)
- meson: Use fast_io regmap option to avoid sleeping in irq ctx (Lyude)
- meson: Don't walk off the end of the OSD EOTF LUTs (Lyude)

Cc: Lyude Paul <lyude@redhat.com>
Cc: Sergio Correia <sergio@correia.cc>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212936.GA21379@art_vandelay
2018-11-29 10:11:15 +10:00
Dave Airlie 50c1877127 Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Fixes for 4.20.  Nothing major.
- DC DP MST fix
- GPUVM fix for huge page mapping
- RLC fix for vega20

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128195905.2897-1-alexander.deucher@amd.com
2018-11-29 10:08:14 +10:00
Dave Airlie 5c1c86031e Merge tag 'drm-intel-fixes-2018-11-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Just gvt-fixes-2018-11-26

""One to correct MOCS registers load on engine list, one for rpm lock
warning fix, and another for use-after-free fix for partial ggtt
list destroy. "

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128180648.GA17585@jlahtine-desk.ger.corp.intel.com
2018-11-29 09:59:26 +10:00
Dave Airlie c5fbf9ebe0 R-Car DU v4.20 regression fix
-----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCgBAFiEEvZRkio5H7O2/GZsYYiVdKZ4oCyQFAlv7sqoiHGxhdXJlbnQu
 cGluY2hhcnRAaWRlYXNvbmJvYXJkLmNvbQAKCRBiJV0pnigLJOs8D/wPpE41qBLk
 S97doZUPGfb4J5HC+7EqiSyzuQ/f0xYT1bNzKlxeU8FJQtXaph7vsGK9t1N59+/1
 vrqp7sAlKVf6hSaoL85GhWev33oZPtqKL7M6n0a5np5o7unYz+Y68vpPQiAL6MHn
 X4+o9OxEUM8ztuioI5fumtiYhY1fvv19Hhkkgo7FnO8cA48qaf2A6PVrnxM58NJC
 OY2bCHZPKgSp/jPgT8z+ARHo/AZyouBarCruriSLtUSurBm1bSlUCjk83tUUl4TL
 yH4vv4TZ4wprZRg3Xa9NoyPEUSZNkE6Z3Sy1gYldvW6fJEIqRwUXkFB85QOZsmKr
 WgvBbEMJcwQyw0fT4fNZGnuBgTrt0F4vcT86QPom8/499L4RMmMJ5yOA/HQtUclJ
 +yiREv6AB/qmIyBV+w/56+41tUmP+DkdkIf3ryveGjAfS6amVdxrt6nMMPU4ck2x
 FGJUmH+vavgTWO9eA+1bqiK9VUzYY1RUd3xt8tU3cNfhMAbf3g1tGc0mQzueS676
 dLYo9Hy4L+dJhkORB3L4lbcKQPlkzFD0TREn2zmivmG9BHKoVwhOjEk68FpVnkwZ
 P8YHIUze+AntNB4gq27iUx0oI/dVvufAouk98JGv/m17qi+MneySH6J+FovXE8Qu
 1/eSMk1W7UFgjVA57s9D77B/aUCrmePikw==
 =GJBo
 -----END PGP SIGNATURE-----

Merge tag 'du-fixes-20181126' of git://linuxtv.org/pinchartl/media into drm-fixes

R-Car DU v4.20 regression fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8134504.ZSXK7gKU4H@avalon
2018-11-29 09:58:40 +10:00
Y.C. Chen 3006256203 drm/ast: fixed reading monitor EDID not stable issue
v1: over-sample data to increase the stability with some specific monitors
v2: refine to avoid infinite loop
v3: remove un-necessary "volatile" declaration

[airlied: fix two checkpatch warnings]

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-email-yc_chen@aspeedtech.com
2018-11-29 09:55:55 +10:00
Sam Bobroff dc25ab0676 drm/ast: Fix incorrect free on ioregs
If the platform has no IO space, ioregs is placed next to the already
allocated regs. In this case, it should not be separately freed.

This prevents a kernel warning from __vunmap "Trying to vfree()
nonexistent vm area" when unloading the driver.

Fixes: 0dd68309b9 ("drm/ast: Try to use MMIO registers when PIO isn't supported")

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-11-29 09:41:11 +10:00
Lyude Paul 9765635b30 Revert "drm/dp_mst: Skip validating ports during destruction, just ref"
This reverts commit:

c54c7374ff ("drm/dp_mst: Skip validating ports during destruction, just ref")

ugh.

In drm_dp_destroy_connector_work(), we have a pretty good chance of
freeing the actual struct drm_dp_mst_port. However, after destroying
things we send a hotplug through (*mgr->cbs->hotplug)(mgr) which is
where the problems start.

For i915, this calls all the way down to the fbcon probing helpers,
which start trying to access the port in a modeset.

[   45.062001] ==================================================================
[   45.062112] BUG: KASAN: use-after-free in ex_handler_refcount+0x146/0x180
[   45.062196] Write of size 4 at addr ffff8882b4b70968 by task kworker/3:1/53

[   45.062325] CPU: 3 PID: 53 Comm: kworker/3:1 Kdump: loaded Tainted: G           O      4.20.0-rc4Lyude-Test+ #3
[   45.062442] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018
[   45.062554] Workqueue: events drm_dp_destroy_connector_work [drm_kms_helper]
[   45.062641] Call Trace:
[   45.062685]  dump_stack+0xbd/0x15a
[   45.062735]  ? dump_stack_print_info.cold.0+0x1b/0x1b
[   45.062801]  ? printk+0x9f/0xc5
[   45.062847]  ? kmsg_dump_rewind_nolock+0xe4/0xe4
[   45.062909]  ? ex_handler_refcount+0x146/0x180
[   45.062970]  print_address_description+0x71/0x239
[   45.063036]  ? ex_handler_refcount+0x146/0x180
[   45.063095]  kasan_report.cold.5+0x242/0x30b
[   45.063155]  __asan_report_store4_noabort+0x1c/0x20
[   45.063313]  ex_handler_refcount+0x146/0x180
[   45.063371]  ? ex_handler_clear_fs+0xb0/0xb0
[   45.063428]  fixup_exception+0x98/0xd7
[   45.063484]  ? raw_notifier_call_chain+0x20/0x20
[   45.063548]  do_trap+0x6d/0x210
[   45.063605]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063732]  do_error_trap+0xc0/0x170
[   45.063802]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.063929]  do_invalid_op+0x3b/0x50
[   45.063997]  ? _GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064103]  invalid_op+0x14/0x20
[   45.064162] RIP: 0010:_GLOBAL__sub_I_65535_1_drm_dp_aux_unregister_devnode+0x2f/0x1c6 [drm_kms_helper]
[   45.064274] Code: 00 48 c7 c7 80 fe 53 a0 48 89 e5 e8 5b 6f 26 e1 5d c3 48 8d 0e 0f 0b 48 8d 0b 0f 0b 48 8d 0f 0f 0b 48 8d 0f 0f 0b 49 8d 4d 00 <0f> 0b 49 8d 0e 0f 0b 48 8d 08 0f 0b 49 8d 4d 00 0f 0b 48 8d 0b 0f
[   45.064569] RSP: 0018:ffff8882b789ee10 EFLAGS: 00010282
[   45.064637] RAX: ffff8882af47ae70 RBX: ffff8882af47aa60 RCX: ffff8882b4b70968
[   45.064723] RDX: ffff8882af47ae70 RSI: 0000000000000008 RDI: ffff8882b788bdb8
[   45.064808] RBP: ffff8882b789ee28 R08: ffffed1056f13db4 R09: ffffed1056f13db3
[   45.064894] R10: ffffed1056f13db3 R11: ffff8882b789ed9f R12: ffff8882af47ad28
[   45.064980] R13: ffff8882b4b70968 R14: ffff8882acd86728 R15: ffff8882b4b75dc8
[   45.065084]  drm_dp_mst_reset_vcpi_slots+0x12/0x80 [drm_kms_helper]
[   45.065225]  intel_mst_disable_dp+0xda/0x180 [i915]
[   45.065361]  intel_encoders_disable.isra.107+0x197/0x310 [i915]
[   45.065498]  haswell_crtc_disable+0xbe/0x400 [i915]
[   45.065622]  ? i9xx_disable_plane+0x1c0/0x3e0 [i915]
[   45.065750]  intel_atomic_commit_tail+0x74e/0x3e60 [i915]
[   45.065884]  ? intel_pre_plane_update+0xbc0/0xbc0 [i915]
[   45.065968]  ? drm_atomic_helper_swap_state+0x88b/0x1d90 [drm_kms_helper]
[   45.066054]  ? kasan_check_write+0x14/0x20
[   45.066165]  ? i915_gem_track_fb+0x13a/0x330 [i915]
[   45.066277]  ? i915_sw_fence_complete+0xe9/0x140 [i915]
[   45.066406]  ? __i915_sw_fence_complete+0xc50/0xc50 [i915]
[   45.066540]  intel_atomic_commit+0x72e/0xef0 [i915]
[   45.066635]  ? drm_dev_dbg+0x200/0x200 [drm]
[   45.066764]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.066898]  ? intel_atomic_commit_tail+0x3e60/0x3e60 [i915]
[   45.067001]  drm_atomic_commit+0xc4/0xf0 [drm]
[   45.067074]  restore_fbdev_mode_atomic+0x562/0x780 [drm_kms_helper]
[   45.067166]  ? drm_fb_helper_debug_leave+0x690/0x690 [drm_kms_helper]
[   45.067249]  ? kasan_check_read+0x11/0x20
[   45.067324]  restore_fbdev_mode+0x127/0x4b0 [drm_kms_helper]
[   45.067364]  ? kasan_check_read+0x11/0x20
[   45.067406]  drm_fb_helper_restore_fbdev_mode_unlocked+0x164/0x200 [drm_kms_helper]
[   45.067462]  ? drm_fb_helper_hotplug_event+0x30/0x30 [drm_kms_helper]
[   45.067508]  ? kasan_check_write+0x14/0x20
[   45.070360]  ? mutex_unlock+0x22/0x40
[   45.073748]  drm_fb_helper_set_par+0xb2/0xf0 [drm_kms_helper]
[   45.075846]  drm_fb_helper_hotplug_event.part.33+0x1cd/0x290 [drm_kms_helper]
[   45.078088]  drm_fb_helper_hotplug_event+0x1c/0x30 [drm_kms_helper]
[   45.082614]  intel_fbdev_output_poll_changed+0x9f/0x140 [i915]
[   45.087069]  drm_kms_helper_hotplug_event+0x67/0x90 [drm_kms_helper]
[   45.089319]  intel_dp_mst_hotplug+0x37/0x50 [i915]
[   45.091496]  drm_dp_destroy_connector_work+0x510/0x6f0 [drm_kms_helper]
[   45.093675]  ? drm_dp_update_payload_part1+0x1220/0x1220 [drm_kms_helper]
[   45.095851]  ? kasan_check_write+0x14/0x20
[   45.098473]  ? kasan_check_read+0x11/0x20
[   45.101155]  ? strscpy+0x17c/0x530
[   45.103808]  ? __switch_to_asm+0x34/0x70
[   45.106456]  ? syscall_return_via_sysret+0xf/0x7f
[   45.109711]  ? read_word_at_a_time+0x20/0x20
[   45.113138]  ? __switch_to_asm+0x40/0x70
[   45.116529]  ? __switch_to_asm+0x34/0x70
[   45.119891]  ? __switch_to_asm+0x40/0x70
[   45.123224]  ? __switch_to_asm+0x34/0x70
[   45.126540]  ? __switch_to_asm+0x34/0x70
[   45.129824]  process_one_work+0x88d/0x15d0
[   45.133172]  ? pool_mayday_timeout+0x850/0x850
[   45.136459]  ? pci_mmcfg_check_reserved+0x110/0x128
[   45.139739]  ? wake_q_add+0xb0/0xb0
[   45.143010]  ? check_preempt_wakeup+0x652/0x1050
[   45.146304]  ? worker_enter_idle+0x29e/0x740
[   45.149589]  ? __schedule+0x1ec0/0x1ec0
[   45.152937]  ? kasan_check_read+0x11/0x20
[   45.156179]  ? _raw_spin_lock_irq+0xa3/0x130
[   45.159382]  ? _raw_read_unlock_irqrestore+0x30/0x30
[   45.162542]  ? kasan_check_write+0x14/0x20
[   45.165657]  worker_thread+0x1a5/0x1470
[   45.168725]  ? set_load_weight+0x2e0/0x2e0
[   45.171755]  ? process_one_work+0x15d0/0x15d0
[   45.174806]  ? __switch_to_asm+0x34/0x70
[   45.177645]  ? __switch_to_asm+0x40/0x70
[   45.180323]  ? __switch_to_asm+0x34/0x70
[   45.182936]  ? __switch_to_asm+0x40/0x70
[   45.185539]  ? __switch_to_asm+0x34/0x70
[   45.188100]  ? __switch_to_asm+0x40/0x70
[   45.190628]  ? __schedule+0x7d4/0x1ec0
[   45.193143]  ? save_stack+0xa9/0xd0
[   45.195632]  ? kasan_check_write+0x10/0x20
[   45.198162]  ? kasan_kmalloc+0xc4/0xe0
[   45.200609]  ? kmem_cache_alloc_trace+0xdd/0x190
[   45.203046]  ? kthread+0x9f/0x3b0
[   45.205470]  ? ret_from_fork+0x35/0x40
[   45.207876]  ? unwind_next_frame+0x43/0x50
[   45.210273]  ? __save_stack_trace+0x82/0x100
[   45.212658]  ? deactivate_slab.isra.67+0x3d4/0x580
[   45.215026]  ? default_wake_function+0x35/0x50
[   45.217399]  ? kasan_check_read+0x11/0x20
[   45.219825]  ? _raw_spin_lock_irqsave+0xae/0x140
[   45.222174]  ? __lock_text_start+0x8/0x8
[   45.224521]  ? replenish_dl_entity.cold.62+0x4f/0x4f
[   45.226868]  ? __kthread_parkme+0x87/0xf0
[   45.229200]  kthread+0x2f7/0x3b0
[   45.231557]  ? process_one_work+0x15d0/0x15d0
[   45.233923]  ? kthread_park+0x120/0x120
[   45.236249]  ret_from_fork+0x35/0x40

[   45.240875] Allocated by task 242:
[   45.243136]  save_stack+0x43/0xd0
[   45.245385]  kasan_kmalloc+0xc4/0xe0
[   45.247597]  kmem_cache_alloc_trace+0xdd/0x190
[   45.249793]  drm_dp_add_port+0x1e0/0x2170 [drm_kms_helper]
[   45.252000]  drm_dp_send_link_address+0x4a7/0x740 [drm_kms_helper]
[   45.254389]  drm_dp_check_and_send_link_address+0x1a7/0x210 [drm_kms_helper]
[   45.256803]  drm_dp_mst_link_probe_work+0x6f/0xb0 [drm_kms_helper]
[   45.259200]  process_one_work+0x88d/0x15d0
[   45.261597]  worker_thread+0x1a5/0x1470
[   45.264038]  kthread+0x2f7/0x3b0
[   45.266371]  ret_from_fork+0x35/0x40

[   45.270937] Freed by task 53:
[   45.273170]  save_stack+0x43/0xd0
[   45.275382]  __kasan_slab_free+0x139/0x190
[   45.277604]  kasan_slab_free+0xe/0x10
[   45.279826]  kfree+0x99/0x1b0
[   45.282044]  drm_dp_free_mst_port+0x4a/0x60 [drm_kms_helper]
[   45.284330]  drm_dp_destroy_connector_work+0x43e/0x6f0 [drm_kms_helper]
[   45.286660]  process_one_work+0x88d/0x15d0
[   45.288934]  worker_thread+0x1a5/0x1470
[   45.291231]  kthread+0x2f7/0x3b0
[   45.293547]  ret_from_fork+0x35/0x40

[   45.298206] The buggy address belongs to the object at ffff8882b4b70968
                which belongs to the cache kmalloc-2k of size 2048
[   45.303047] The buggy address is located 0 bytes inside of
                2048-byte region [ffff8882b4b70968, ffff8882b4b71168)
[   45.308010] The buggy address belongs to the page:
[   45.310477] page:ffffea000ad2dc00 count:1 mapcount:0 mapping:ffff8882c080cf40 index:0x0 compound_mapcount: 0
[   45.313051] flags: 0x8000000000010200(slab|head)
[   45.315635] raw: 8000000000010200 ffffea000aac2808 ffffea000abe8608 ffff8882c080cf40
[   45.318300] raw: 0000000000000000 00000000000d000d 00000001ffffffff 0000000000000000
[   45.320966] page dumped because: kasan: bad access detected

[   45.326312] Memory state around the buggy address:
[   45.329085]  ffff8882b4b70800: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.331845]  ffff8882b4b70880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   45.334584] >ffff8882b4b70900: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[   45.337302]                                                           ^
[   45.340061]  ffff8882b4b70980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.342910]  ffff8882b4b70a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   45.345748] ==================================================================

So, this definitely isn't a fix that we want. This being said; there's
no real easy fix for this problem because of some of the catch-22's of
the MST helpers current design. For starters; we always need to validate
a port with drm_dp_get_validated_port_ref(), but validation relies on
the lifetime of the port in the actual topology. So once the port is
gone, it can't be validated again.

If we were to try to make the payload helpers not use port validation,
then we'd cause another problem: if the port isn't validated, it could
be freed and we'd just start causing more KASAN issues. There are
already hacks that attempt to workaround this in
drm_dp_mst_destroy_connector_work() by re-initializing the kref so that
it can be used again and it's memory can be freed once the VCPI helpers
finish removing the port's respective payloads. But none of these really
do anything helpful since the port still can't be validated since it's
gone from the topology. Also, that workaround is immensely confusing to
read through.

What really needs to be done in order to fix this is to teach DRM how to
track the lifetime of the structs for MST ports and branch devices
separately from their lifetime in the actual topology. Simply put; this
means having two different krefs-one that removes the port/branch device
from the topology, and one that finally calls kfree(). This would let us
simplify things, since we'd now be able to keep ports around without
having to keep them in the topology at the same time, which is exactly
what we need in order to teach our VCPI helpers to only validate ports
when it's actually necessary without running the risk of trying to use
unallocated memory.

Such a fix is on it's way, but for now let's play it safe and just
revert this. If this bug has been around for well over a year, we can
wait a little while to get an actual proper fix here.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c54c7374ff ("drm/dp_mst: Skip validating ports during destruction, just ref")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: stable@vger.kernel.org # v4.6+
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128210005.24434-1-lyude@redhat.com
2018-11-28 16:22:17 -05:00
shaoyunl ad97d9de45 drm/amdgpu: Add delay after enable RLC ucode
Driver shouldn't try to access any GFX registers until RLC is idle.
During the test, it took 12 seconds for RLC to clear the BUSY bit
in RLC_GPM_STAT register which is un-acceptable for driver.
As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK
cycles to finish its critical section. In a lowest 300M enginer clock
setting(default from vbios), 50 us delay is enough.

This commit fix the hang when RLC introduce the work around for XGMI
which requires more cycles to setup more registers than normal

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-28 14:52:44 -05:00
Felix Kuehling 1954db153d drm/amdgpu: Avoid endless loop in GPUVM fragment processing
Don't bounce back to the root level for fragment processing, because
huge pages are not supported at that level. This is unlikely to happen
with the default VM size on Vega, but can be exposed by limiting the
VM size with the amdgpu.vm_size module parameter.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-28 14:38:48 -05:00
Felix Kuehling 9ce2b991f7 drm/amdgpu: Cast to uint64_t before left shift
Avoid potential integer overflows with left shift in huge-page mapping
code by casting the operand to uin64_t first.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-28 14:38:33 -05:00
Christian Hewitt 31e1ab4945 drm/meson: add support for 1080p25 mode
This essential mode for PAL users is missing, so add it.

Fixes: 335e3713af ("drm/meson: Add support for HDMI venc modes and settings")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-email-christianshewitt@gmail.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
2018-11-26 16:14:28 -05:00