Граф коммитов

635 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 1827adb11a Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched.h split-up from Ingo Molnar:
 "The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...
2017-03-03 10:16:38 -08:00
Linus Torvalds 94e877d0fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile two from Al Viro:

 - orangefs fix

 - series of fs/namei.c cleanups from me

 - VFS stuff coming from overlayfs tree

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  orangefs: Use RCU for destroy_inode
  vfs: use helper for calling f_op->fsync()
  mm: use helper for calling f_op->mmap()
  vfs: use helpers for calling f_op->{read,write}_iter()
  vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
  vfs: extract common parts of {compat_,}do_readv_writev()
  vfs: wrap write f_ops with file_{start,end}_write()
  vfs: deny copy_file_range() for non regular files
  vfs: deny fallocate() on directory
  vfs: create vfs helper vfs_tmpfile()
  namei.c: split unlazy_walk()
  namei.c: fold the check for DCACHE_OP_REVALIDATE into d_revalidate()
  lookup_fast(): clean up the logics around the fallback to non-rcu mode
  namei: fold unlazy_link() into its sole caller
2017-03-02 15:20:00 -08:00
Al Viro 653a7746fa Merge remote-tracking branch 'ovl/for-viro' into for-linus
Overlayfs-related series from Miklos and Amir
2017-03-02 06:41:22 -05:00
Ingo Molnar eb61baf698 sched/headers: Move the wake-queue types and interfaces from sched.h into <linux/sched/wake_q.h>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:42 +01:00
Ingo Molnar f719ff9bce sched/headers: Prepare to move the task_lock()/unlock() APIs to <linux/sched/task.h>
But first update the code that uses these facilities with the
new header.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:38 +01:00
Ingo Molnar 5b825c3af1 sched/headers: Prepare to remove <linux/cred.h> inclusion from <linux/sched.h>
Add #include <linux/cred.h> dependencies to all .c files rely on sched.h
doing that for them.

Note that even if the count where we need to add extra headers seems high,
it's still a net win, because <linux/sched.h> is included in over
2,200 files ...

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:31 +01:00
Ingo Molnar 8703e8a465 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/user.h>
We are going to split <linux/sched/user.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/user.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Ingo Molnar 3f07c01441 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/signal.h>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:29 +01:00
Ingo Molnar 84f001e157 sched/headers: Prepare for new header dependencies before moving code to <linux/sched/wake_q.h>
We are going to split <linux/sched/wake_q.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/wake_q.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:26 +01:00
Davidlohr Bueso 95e91b831f ipc/shm: Fix shmat mmap nil-page protection
The issue is described here, with a nice testcase:

    https://bugzilla.kernel.org/show_bug.cgi?id=192931

The problem is that shmat() calls do_mmap_pgoff() with MAP_FIXED, and
the address rounded down to 0.  For the regular mmap case, the
protection mentioned above is that the kernel gets to generate the
address -- arch_get_unmapped_area() will always check for MAP_FIXED and
return that address.  So by the time we do security_mmap_addr(0) things
get funky for shmat().

The testcase itself shows that while a regular user crashes, root will
not have a problem attaching a nil-page.  There are two possible fixes
to this.  The first, and which this patch does, is to simply allow root
to crash as well -- this is also regular mmap behavior, ie when hacking
up the testcase and adding mmap(...  |MAP_FIXED).  While this approach
is the safer option, the second alternative is to ignore SHM_RND if the
rounded address is 0, thus only having MAP_SHARED flags.  This makes the
behavior of shmat() identical to the mmap() case.  The downside of this
is obviously user visible, but does make sense in that it maintains
semantics after the round-down wrt 0 address and mmap.

Passes shm related ltp tests.

Link: http://lkml.kernel.org/r/1486050195-18629-1-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reported-by: Gareth Evans <gareth.evans@contextis.co.uk>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Luc Van Oostenryck eac0b1c368 ipc/mqueue: add missing sparse annotation
Link: http://lkml.kernel.org/r/20170128235704.45302-1-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Manfred Spraul 9de5ab8a2e ipc/sem: add hysteresis
sysv sem has two lock modes: One with per-semaphore locks, one lock mode
with a single global lock for the whole array.  When switching from the
per-semaphore locks to the global lock, all per-semaphore locks must be
scanned for ongoing operations.

The patch adds a hysteresis for switching from the global lock to the
per semaphore locks.  This reduces how often the per-semaphore locks
must be scanned.

Compared to the initial patch, this is a simplified solution: Setting
USE_GLOBAL_LOCK_HYSTERESIS to 1 restores the current behavior.

In theory, a workload with exactly 10 simple sops and then one complex
op now scales a bit worse, but this is pure theory: If there is
concurrency, the it won't be exactly 10:1:10:1:10:1:...  If there is no
concurrency, then there is no need for scalability.

Link: http://lkml.kernel.org/r/1476851896-3590-3-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <1vier1@web.de>
Cc: kernel test robot <xiaolong.ye@intel.com>
Cc: <felixh@informatik.uni-bremen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Manfred Spraul 27d7be1801 ipc/sem.c: avoid using spin_unlock_wait()
a) The ACQUIRE in spin_lock() applies to the read, not to the store, at
   least for powerpc.  This forces to add a smp_mb() into the fast path.

b) The memory barrier provided by spin_unlock_wait() is right now arch
   dependent.

Therefore: Use spin_lock()/spin_unlock() instead of spin_unlock_wait().

Advantage: faster single op semop calls(), observed +8.9% on x86.  (the
other solution would be arch dependencies in ipc/sem).

Disadvantage: slower complex op semop calls, if (and only if) there are
no sleeping operations.

The next patch adds hysteresis, this further reduces the probability
that the slow path is used.

Link: http://lkml.kernel.org/r/1476851896-3590-2-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: <1vier1@web.de>
Cc: kernel test robot <xiaolong.ye@intel.com>
Cc: <felixh@informatik.uni-bremen.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:46 -08:00
Mike Rapoport 897ab3e0c4 userfaultfd: non-cooperative: add event for memory unmaps
When a non-cooperative userfaultfd monitor copies pages in the
background, it may encounter regions that were already unmapped.
Addition of UFFD_EVENT_UNMAP allows the uffd monitor to track precisely
changes in the virtual memory layout.

Since there might be different uffd contexts for the affected VMAs, we
first should create a temporary representation for the unmap event for
each uffd context and then notify them one by one to the appropriate
userfault file descriptors.

The event notification occurs after the mmap_sem has been released.

[arnd@arndb.de: fix nommu build]
  Link: http://lkml.kernel.org/r/20170203165141.3665284-1-arnd@arndb.de
[mhocko@suse.com: fix nommu build]
  Link: http://lkml.kernel.org/r/20170202091503.GA22823@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/1485542673-24387-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:55 -08:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Miklos Szeredi 0eb8af4916 vfs: use helper for calling f_op->fsync()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-20 16:51:23 +01:00
Miklos Szeredi f74ac01520 mm: use helper for calling f_op->mmap()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-20 16:51:23 +01:00
Manfred Spraul c626bc46ed ipc/sem.c: fix incorrect sem_lock pairing
Based on the syzcaller test case from dvyukov:

  08d0a261fe/gistfile1.txt

The slow (i.e.: failure to acquire) syscall exit from semtimedop()
incorrectly assumed that the the same lock is acquired as it was at the
initial syscall entry.

This is wrong:
 - thread A: single semop semop(), sleeps
 - thread B: multi semop semop(), sleeps
 - thread A: woken up by signal/timeout

With this sequence, the initial sem_lock() call locks the per-semaphore
spinlock, and it is unlocked with sem_unlock().  The call at the syscall
return locks the global spinlock.  Because locknum is not updated, the
following sem_unlock() call unlocks the per-semaphore spinlock, which is
actually not locked.

The fix is trivial: Use the return value from sem_lock.

Fixes: 370b262c89 ("ipc/sem: avoid idr tree lookup for interrupted semop")
Link: http://lkml.kernel.org/r/1482215645-22328-1-git-send-email-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Johanna Abrahamsson <johanna@mjao.org>
Tested-by: Johanna Abrahamsson <johanna@mjao.org>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-10 18:31:55 -08:00
Davidlohr Bueso 370b262c89 ipc/sem: avoid idr tree lookup for interrupted semop
We can avoid the idr tree lookup (albeit possibly avoiding
idr_find_fast()) when being awoken in EINTR, as the semid will not
change in this context while blocked.  Use the sma pointer directly and
take the sem_lock, then re-check for RMID races.  We continue to
re-check the queue.status with the lock held such that we can detect
situations where we where are dealing with a spurious wakeup but another
task that holds the sem_lock updated the queue.status while we were
spinning for it.  Once we take the lock it obviously won't change again.

Being the only caller, get rid of sem_obtain_lock() altogether.

Link: http://lkml.kernel.org/r/1478708774-28826-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso b5fa01a22e ipc/sem: simplify wait-wake loop
Instead of using the reverse goto, we can simplify the flow and make it
more language natural by just doing do-while instead.  One would hope
this is the standard way (or obviously just with a while bucle) that we
do wait/wakeup handling in the kernel.  The exact same logic is kept,
just more indented.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1478708774-28826-2-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso f150f02cfb ipc/sem: use proper list api for pending_list wakeups
... saves some LoC and looks cleaner than re-implementing the calls.

Link: http://lkml.kernel.org/r/1474225896-10066-6-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 4663d3e8f2 ipc/sem: explicitly inline check_restart
The compiler already does this, but make it explicit.  This helper is
really small and also used in update_queue's main loop, which is O(N^2)
scanning.  Inline and avoid the function overhead.

Link: http://lkml.kernel.org/r/1474225896-10066-5-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 4ce33ec2e4 ipc/sem: optimize perform_atomic_semop()
This is the main workhorse that deals with semop user calls such that
the waitforzero or semval update operations, on the set, can complete on
not as the sma currently stands.  Currently, the set is iterated twice
(setting semval, then backwards for the sempid value).  Slowpaths, and
particularly SEM_UNDO calls, must undo any altered sem when it is
detected that the caller must block or has errored-out.

With larger sets, there can occur situations where this involves a lot
of cycles and can obviously be a suboptimal use of cached resources in
shared memory.  Ie, discarding CPU caches that are also calling semop
and have the sembuf cached (and can complete), while the current lock
holder doing the semop will block, error, or does a waitforzero
operation.

This patch proposes still iterating the set twice, but the first scan is
read-only, and we perform the actual updates afterward, once we know
that the call will succeed.  In order to not suffer from the overhead of
dealing with sops that act on the same sem_num, such (rare) cases use
perform_atomic_semop_slow(), which is exactly what we have now.
Duplicates are detected before grabbing sem_lock, and uses simple a
32/64-bit hash array variable to based on the sem_num we are working on.

In addition add some comments to when we expect to the caller to block.

[akpm@linux-foundation.org: coding-style fixes]
[colin.king@canonical.com: ensure we left shift a ULL rather than a 32 bit integer]
  Link: http://lkml.kernel.org/r/20161028181129.7311-1-colin.king@canonical.com
Link: http://lkml.kernel.org/r/20160921194603.GB21438@linux-80c1.suse
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 9ae949fa38 ipc/sem: rework task wakeups
Our sysv sems have been using the notion of lockless wakeups for a
while, ever since commit 0a2b9d4c79 ("ipc/sem.c: move wake_up_process
out of the spinlock section"), in order to reduce the sem_lock hold
times.  This in-house pending queue can be replaced by wake_q (just like
all the rest of ipc now), in that it provides the following advantages:

 o Simplifies and gets rid of unnecessary code.

 o We get rid of the IN_WAKEUP complexities. Given that wake_q_add()
   grabs reference to the task, if awoken due to an unrelated event,
   between the wake_q_add() and wake_up_q() window, we cannot race with
   sys_exit and the imminent call to wake_up_process().

 o By not spinning IN_WAKEUP, we no longer need to disable preemption.

In consequence, the wakeup paths (after schedule(), that is) must
acknowledge an external signal/event, as well spurious wakeup occurring
during the pending wakeup window.  Obviously no changes in semantics
that could be visible to the user.  The fastpath is _only_ for when we
know for sure that we were awoken due to a the waker's successful semop
call (queue.status is not -EINTR).

On a 48-core Haswell, running the ipcscale 'waitforzero' test, the
following is seen with increasing thread counts:

                               v4.8-rc5                v4.8-rc5
                                                        semopv2
Hmean    sembench-sem-2      574733.00 (  0.00%)   578322.00 (  0.62%)
Hmean    sembench-sem-8      811708.00 (  0.00%)   824689.00 (  1.59%)
Hmean    sembench-sem-12     842448.00 (  0.00%)   845409.00 (  0.35%)
Hmean    sembench-sem-21     933003.00 (  0.00%)   977748.00 (  4.80%)
Hmean    sembench-sem-48     935910.00 (  0.00%)  1004759.00 (  7.36%)
Hmean    sembench-sem-79     937186.00 (  0.00%)   983976.00 (  4.99%)
Hmean    sembench-sem-234    974256.00 (  0.00%)  1060294.00 (  8.83%)
Hmean    sembench-sem-265    975468.00 (  0.00%)  1016243.00 (  4.18%)
Hmean    sembench-sem-296    991280.00 (  0.00%)  1042659.00 (  5.18%)
Hmean    sembench-sem-327    975415.00 (  0.00%)  1029977.00 (  5.59%)
Hmean    sembench-sem-358   1014286.00 (  0.00%)  1049624.00 (  3.48%)
Hmean    sembench-sem-389    972939.00 (  0.00%)  1043127.00 (  7.21%)
Hmean    sembench-sem-420    981909.00 (  0.00%)  1056747.00 (  7.62%)
Hmean    sembench-sem-451    990139.00 (  0.00%)  1051609.00 (  6.21%)
Hmean    sembench-sem-482    965735.00 (  0.00%)  1040313.00 (  7.72%)

[akpm@linux-foundation.org: coding-style fixes]
[sfr@canb.auug.org.au: merge fix for WAKE_Q to DEFINE_WAKE_Q rename]
  Link: http://lkml.kernel.org/r/20161122210410.5eca9fc2@canb.auug.org.au
Link: http://lkml.kernel.org/r/1474225896-10066-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Davidlohr Bueso 248e7357cf ipc/sem: do not call wake_sem_queue_do() prematurely ... as this call should obviously be paired with its _prepare()
counterpart.  At least whenever possible, as there is no harm in calling
it bogusly as we do now in a few places.  Immediate error semop(2) paths
that are far from ever having the task block can be simplified and avoid
a few unnecessary loads on their way out of the call as it is not deeply
nested.

Link: http://lkml.kernel.org/r/1474225896-10066-2-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Shailesh Pandey 63980c80e1 ipc/shm.c: coding style fixes
This patch fixes below warnings:

  WARNING: Missing a blank line after declarations
  WARNING: Block comments use a trailing */ on a separate line
  ERROR: spaces required around that '=' (ctx:WxV)

Above warnings were reported by checkpatch.pl

Link: http://lkml.kernel.org/r/1478604980-18062-1-git-send-email-p.shailesh@samsung.com
Signed-off-by: Shailesh Pandey <p.shailesh@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Jiri Slaby 999898355e ipc: msg, make msgrcv work with LONG_MIN
When LONG_MIN is passed to msgrcv, one would expect to recieve any
message.  But convert_mode does *msgtyp = -*msgtyp and -LONG_MIN is
undefined.  In particular, with my gcc -LONG_MIN produces -LONG_MIN
again.

So handle this case properly by assigning LONG_MAX to *msgtyp if
LONG_MIN was specified as msgtyp to msgrcv.

This code:
  long msg[] = { 100, 200 };
  int m = msgget(IPC_PRIVATE, IPC_CREAT | 0644);
  msgsnd(m, &msg, sizeof(msg), 0);
  msgrcv(m, &msg, sizeof(msg), LONG_MIN, 0);

produces currently nothing:

  msgget(IPC_PRIVATE, IPC_CREAT|0644)     = 65538
  msgsnd(65538, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
  msgrcv(65538, ...

Except a UBSAN warning:

  UBSAN: Undefined behaviour in ipc/msg.c:745:13
  negation of -9223372036854775808 cannot be represented in type 'long int':

With the patch, I see what I expect:

  msgget(IPC_PRIVATE, IPC_CREAT|0644)     = 0
  msgsnd(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, 0) = 0
  msgrcv(0, {100, "\310\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"}, 16, -9223372036854775808, 0) = 16

Link: http://lkml.kernel.org/r/20161024082633.10148-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:08 -08:00
Waiman Long 194a6b5b9c sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q
Currently the wake_q data structure is defined by the WAKE_Q() macro.
This macro, however, looks like a function doing something as "wake" is
a verb. Even checkpatch.pl was confused as it reported warnings like

  WARNING: Missing a blank line after declarations
  #548: FILE: kernel/futex.c:3665:
  +	int ret;
  +	WAKE_Q(wake_q);

This patch renames the WAKE_Q() macro to DEFINE_WAKE_Q() which clarifies
what the macro is doing and eliminates the checkpatch.pl warnings.

Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479401198-1765-1-git-send-email-longman@redhat.com
[ Resolved conflict and added missing rename. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-21 10:29:01 +01:00
Aristeu Rozanski 8c8d4d4520 ipc: account for kmem usage on mqueue and msg
When kmem accounting switched from account by default to only account if
flagged by __GFP_ACCOUNT, IPC mqueue and messages was left out.

The production use case at hand is that mqueues should be customizable
via sysctls in Docker containers in a Kubernetes cluster.  This can only
be safely allowed to the users of the cluster (without the risk that
they can cause resource shortage on a node, influencing other users'
containers) if all resources they control are bounded, i.e.  accounted
for.

Link: http://lkml.kernel.org/r/1476806075-1210-1-git-send-email-arozansk@redhat.com
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Reported-by: Stefan Schimanski <sttts@redhat.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Stefan Schimanski <sttts@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Nikolay Borisov 2a1613a586 ipc/sem.c: add cond_resched in exit_sme
In CONFIG_PREEMPT=n kernel a softlockup was observed while the for loop in
exit_sem.  Apparently it's possible for the loop to take quite a long time
and it doesn't have a scheduling point in it.  Since the codes is
executing under an rcu read section this may also cause rcu stalls, which
in turn block synchronize_rcu operations, which more or less de-stabilises
the whole system.

Fix this by introducing a cond_resched() at the beginning of the loop.

So this patch fixes the following:

  NMI watchdog: BUG: soft lockup - CPU#10 stuck for 23s! [httpd:18119]
  CPU: 10 PID: 18119 Comm: httpd Tainted: G           O    4.4.20-clouder2 #6
  Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1 04/14/2015
  task: ffff88348d695280 ti: ffff881c95550000 task.ti: ffff881c95550000
  RIP: 0010:[<ffffffff81614bc7>]  [<ffffffff81614bc7>] _raw_spin_lock+0x17/0x30
  RSP: 0018:ffff881c95553e40  EFLAGS: 00000246
  RAX: 0000000000000000 RBX: ffff883161b1eea8 RCX: 000000000000000d
  RDX: 0000000000000001 RSI: 000000000000000e RDI: ffff883161b1eea4
  RBP: ffff881c95553ea0 R08: ffff881c95553e68 R09: ffff883fef376f88
  R10: ffff881fffb58c20 R11: ffffea0072556600 R12: ffff883161b1eea0
  R13: ffff88348d695280 R14: ffff883dec427000 R15: ffff8831621672a0
  FS:  0000000000000000(0000) GS:ffff881fffb40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f3b3723e020 CR3: 0000000001c0a000 CR4: 00000000001406e0
  Call Trace:
    ? exit_sem+0x7c/0x280
    do_exit+0x338/0xb40
    do_group_exit+0x43/0xd0
    SyS_exit_group+0x14/0x20
    entry_SYSCALL_64_fastpath+0x16/0x6e

Link: http://lkml.kernel.org/r/1475154992-6363-1-git-send-email-kernel@kyup.com
Signed-off-by: Nikolay Borisov <kernel@kyup.com>
Cc: Herton R. Krzesinski <herton@redhat.com>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Davidlohr Bueso ed27f9122c ipc/msg: avoid waking sender upon full queue
Blocked tasks queued in q_senders waiting for their message to fit in the
queue are blindly awoken every time we think there's a remote chance this
might happen.  This could cause numerous (and expensive -- thundering
herd-ish) bogus wakeups if the queue is still really full.  Adding to the
scheduling cost/overhead, there's also the fact that we need to take the
ipc object lock and requeue ourselves in the q_senders list.

By keeping track of the blocked sender's message size, we can know
previously if the wakeup ought to occur or not.  Otherwise, to maintain
the current wakeup order we just move it to the tail.  This is exactly
what occurs right now if the sender needs to go back to sleep.

The case of EIDRM is left completely untouched, as we need to wakeup all
the tasks, and shouldn't be playing games in the first place.

This patch was seen to save on the 'msgctl10' ltp testcase ~15% in context
switches (avg out of ten runs).  Although these tests are really about
functionality (as opposed to performance), is does show the direct
benefits of the optimization.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/1469748819-19484-6-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Davidlohr Bueso d0d6a2a95e ipc/msg: make ss_wakeup() kill arg boolean
... 'tis annoying.

Link: http://lkml.kernel.org/r/1469748819-19484-4-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Davidlohr Bueso e3658538bf ipc/msg: batch queue sender wakeups
Currently the use of wake_qs in sysv msg queues are only for the receiver
tasks that are blocked on the queue.  But blocked sender tasks (due to
queue size constraints) still are awoken with the ipc object lock held,
which can be a problem particularly for small sized queues and far from
gracious for -rt (just like it was for the receiver side).

The paths that actually wakeup a sender are obviously related to when we
are either getting rid of the queue or after (some) space is freed-up
after a receiver takes the msg (msgrcv).  Furthermore, with the exception
of msgrcv, we can always piggy-back on expunge_all that has its own tasks
lined-up for waking.  Finally, upon unlinking the message, it should be no
problem delaying the wakeups a bit until after we've released the lock.

Link: http://lkml.kernel.org/r/1469748819-19484-3-git-send-email-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Sebastian Andrzej Siewior ee51636ca5 ipc/msg: implement lockless pipelined wakeups
This patch moves the wakeup_process() invocation so it is not done under
the ipc global lock by making use of a lockless wake_q.  With this change,
the waiter is woken up once the message has been assigned and it does not
need to loop on SMP if the message points to NULL.  In the signal case we
still need to check the pointer under the lock to verify the state.

This change should also avoid the introduction of preempt_disable() in -RT
which avoids a busy-loop which pools for the NULL -> !NULL change if the
waiter has a higher priority compared to the waker.

By making use of wake_qs, the logic of sysv msg queues is greatly
simplified (and very well suited as we can batch lockless wakeups),
particularly around the lockless receive algorithm.

This has been tested with Manred's pmsg-shared tool on a "AMD A10-7800
Radeon R7, 12 Compute Cores 4C+8G":

test             |   before   |   after    | diff
-----------------|------------|------------|----------
pmsg-shared 8 60 | 19,347,422 | 30,442,191 | + ~57.34 %
pmsg-shared 4 60 | 21,367,197 | 35,743,458 | + ~67.28 %
pmsg-shared 2 60 | 22,884,224 | 24,278,200 | +  ~6.09 %

Link: http://lkml.kernel.org/r/1469748819-19484-2-git-send-email-dave@stgolabs.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Manfred Spraul 5864a2fd30 ipc/sem.c: fix complex_count vs. simple op race
Commit 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()") introduced a
race:

sem_lock has a fast path that allows parallel simple operations.
There are two reasons why a simple operation cannot run in parallel:
 - a non-simple operations is ongoing (sma->sem_perm.lock held)
 - a complex operation is sleeping (sma->complex_count != 0)

As both facts are stored independently, a thread can bypass the current
checks by sleeping in the right positions.  See below for more details
(or kernel bugzilla 105651).

The patch fixes that by creating one variable (complex_mode)
that tracks both reasons why parallel operations are not possible.

The patch also updates stale documentation regarding the locking.

With regards to stable kernels:
The patch is required for all kernels that include the
commit 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()") (3.10?)

The alternative is to revert the patch that introduced the race.

The patch is safe for backporting, i.e. it makes no assumptions
about memory barriers in spin_unlock_wait().

Background:
Here is the race of the current implementation:

Thread A: (simple op)
- does the first "sma->complex_count == 0" test

Thread B: (complex op)
- does sem_lock(): This includes an array scan. But the scan can't
  find Thread A, because Thread A does not own sem->lock yet.
- the thread does the operation, increases complex_count,
  drops sem_lock, sleeps

Thread A:
- spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock)
- sleeps before the complex_count test

Thread C: (complex op)
- does sem_lock (no array scan, complex_count==1)
- wakes up Thread B.
- decrements complex_count

Thread A:
- does the complex_count test

Bug:
Now both thread A and thread C operate on the same array, without
any synchronization.

Fixes: 6d07b68ce1 ("ipc/sem.c: optimize sem_lock()")
Link: http://lkml.kernel.org/r/1469123695-5661-1-git-send-email-manfred@colorfullife.com
Reported-by: <felixh@informatik.uni-bremen.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <1vier1@web.de>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Linus Torvalds 101105b171 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 ">rename2() work from Miklos + current_time() from Deepa"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Replace current_fs_time() with current_time()
  fs: Replace CURRENT_TIME_SEC with current_time() for inode timestamps
  fs: Replace CURRENT_TIME with current_time() for inode timestamps
  fs: proc: Delete inode time initializations in proc_alloc_inode()
  vfs: Add current_time() api
  vfs: add note about i_op->rename changes to porting
  fs: rename "rename2" i_op to "rename"
  vfs: remove unused i_op->rename
  fs: make remaining filesystems use .rename2
  libfs: support RENAME_NOREPLACE in simple_rename()
  fs: support RENAME_NOREPLACE for local filesystems
  ncpfs: fix unused variable warning
2016-10-10 20:16:43 -07:00
Deepa Dinamani 078cd8279e fs: Replace CURRENT_TIME with current_time() for inode timestamps
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_time() instead.

CURRENT_TIME is also not y2038 safe.

This is also in preparation for the patch that transitions
vfs timestamps to use 64 bit time and hence make them
y2038 safe. As part of the effort current_time() will be
extended to do range checks. Hence, it is necessary for all
file system timestamps to use current_time(). Also,
current_time() will be transitioned along with vfs to be
y2038 safe.

Note that whenever a single call to current_time() is used
to change timestamps in different inodes, it is because they
share the same time granularity.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-27 21:06:21 -04:00
Eric W. Biederman 7872559664 Merge branch 'nsfs-ioctls' into HEAD
From: Andrey Vagin <avagin@openvz.org>

Each namespace has an owning user namespace and now there is not way
to discover these relationships.

Pid and user namepaces are hierarchical. There is no way to discover
parent-child relationships too.

Why we may want to know relationships between namespaces?

One use would be visualization, in order to understand the running
system.  Another would be to answer the question: what capability does
process X have to perform operations on a resource governed by namespace
Y?

One more use-case (which usually called abnormal) is checkpoint/restart.
In CRIU we are going to dump and restore nested namespaces.

There [1] was a discussion about which interface to choose to determing
relationships between namespaces.

Eric suggested to add two ioctl-s [2]:
> Grumble, Grumble.  I think this may actually a case for creating ioctls
> for these two cases.  Now that random nsfs file descriptors are bind
> mountable the original reason for using proc files is not as pressing.
>
> One ioctl for the user namespace that owns a file descriptor.
> One ioctl for the parent namespace of a namespace file descriptor.

Here is an implementaions of these ioctl-s.

$ man man7/namespaces.7
...
Since  Linux  4.X,  the  following  ioctl(2)  calls are supported for
namespace file descriptors.  The correct syntax is:

      fd = ioctl(ns_fd, ioctl_type);

where ioctl_type is one of the following:

NS_GET_USERNS
      Returns a file descriptor that refers to an owning user names‐
      pace.

NS_GET_PARENT
      Returns  a  file descriptor that refers to a parent namespace.
      This ioctl(2) can be used for pid  and  user  namespaces.  For
      user namespaces, NS_GET_PARENT and NS_GET_USERNS have the same
      meaning.

In addition to generic ioctl(2) errors, the following  specific  ones
can occur:

EINVAL NS_GET_PARENT was called for a nonhierarchical namespace.

EPERM  The  requested  namespace  is outside of the current namespace
      scope.

[1] https://lkml.org/lkml/2016/7/6/158
[2] https://lkml.org/lkml/2016/7/9/101

Changes for v2:
* don't return ENOENT for init_user_ns and init_pid_ns. There is nothing
  outside of the init namespace, so we can return EPERM in this case too.
  > The fewer special cases the easier the code is to get
  > correct, and the easier it is to read. // Eric

Changes for v3:
* rename ns->get_owner() to ns->owner(). get_* usually means that it
  grabs a reference.

Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "Michael Kerrisk (man-pages)" <mtk.manpages@gmail.com>
Cc: "W. Trevor King" <wking@tremily.us>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
2016-09-22 20:00:36 -05:00
Andrey Vagin bcac25a58b kernel: add a helper to get an owning user namespace for a namespace
Return -EPERM if an owning user namespace is outside of a process
current user namespace.

v2: In a first version ns_get_owner returned ENOENT for init_user_ns.
    This special cases was removed from this version. There is nothing
    outside of init_user_ns, so we can return EPERM.
v3: rename ns->get_owner() to ns->owner(). get_* usually means that it
grabs a reference.

Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-09-22 19:59:39 -05:00
Eric W. Biederman df75e7748b userns: When the per user per user namespace limit is reached return ENOSPC
The current error codes returned when a the per user per user
namespace limit are hit (EINVAL, EUSERS, and ENFILE) are wrong.  I
asked for advice on linux-api and it we made clear that those were
the wrong error code, but a correct effor code was not suggested.

The best general error code I have found for hitting a resource limit
is ENOSPC.  It is not perfect but as it is unambiguous it will serve
until someone comes up with a better error code.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-22 13:25:56 -05:00
Eric W. Biederman aba3566163 ipcns: Add a limit on the number of ipc namespaces
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-08-08 14:42:03 -05:00
Alexey Dobriyan 3bd080e4d8 ipc: delete "nr_ipc_ns"
Write-only variable.

Link: http://lkml.kernel.org/r/20160708214356.GA6785@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 19:35:44 -04:00
Fabian Frederick 9b24fef9f0 sysv, ipc: fix security-layer leaking
Commit 53dad6d3a8 ("ipc: fix race with LSMs") updated ipc_rcu_putref()
to receive rcu freeing function but used generic ipc_rcu_free() instead
of msg_rcu_free() which does security cleaning.

Running LTP msgsnd06 with kmemleak gives the following:

  cat /sys/kernel/debug/kmemleak

  unreferenced object 0xffff88003c0a11f8 (size 8):
    comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s)
    hex dump (first 8 bytes):
      1b 00 00 00 01 00 00 00                          ........
    backtrace:
      kmemleak_alloc+0x23/0x40
      kmem_cache_alloc_trace+0xe1/0x180
      selinux_msg_queue_alloc_security+0x3f/0xd0
      security_msg_queue_alloc+0x2e/0x40
      newque+0x4e/0x150
      ipcget+0x159/0x1b0
      SyS_msgget+0x39/0x40
      entry_SYSCALL_64_fastpath+0x13/0x8f

Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to
only use ipc_rcu_free in case of security allocation failure in newary()

Fixes: 53dad6d3a8 ("ipc: fix race with LSMs")
Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02 17:31:41 -04:00
Linus Torvalds a867d7349e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull userns vfs updates from Eric Biederman:
 "This tree contains some very long awaited work on generalizing the
  user namespace support for mounting filesystems to include filesystems
  with a backing store.  The real world target is fuse but the goal is
  to update the vfs to allow any filesystem to be supported.  This
  patchset is based on a lot of code review and testing to approach that
  goal.

  While looking at what is needed to support the fuse filesystem it
  became clear that there were things like xattrs for security modules
  that needed special treatment.  That the resolution of those concerns
  would not be fuse specific.  That sorting out these general issues
  made most sense at the generic level, where the right people could be
  drawn into the conversation, and the issues could be solved for
  everyone.

  At a high level what this patchset does a couple of simple things:

   - Add a user namespace owner (s_user_ns) to struct super_block.

   - Teach the vfs to handle filesystem uids and gids not mapping into
     to kuids and kgids and being reported as INVALID_UID and
     INVALID_GID in vfs data structures.

  By assigning a user namespace owner filesystems that are mounted with
  only user namespace privilege can be detected.  This allows security
  modules and the like to know which mounts may not be trusted.  This
  also allows the set of uids and gids that are communicated to the
  filesystem to be capped at the set of kuids and kgids that are in the
  owning user namespace of the filesystem.

  One of the crazier corner casees this handles is the case of inodes
  whose i_uid or i_gid are not mapped into the vfs.  Most of the code
  simply doesn't care but it is easy to confuse the inode writeback path
  so no operation that could cause an inode write-back is permitted for
  such inodes (aka only reads are allowed).

  This set of changes starts out by cleaning up the code paths involved
  in user namespace permirted mounts.  Then when things are clean enough
  adds code that cleanly sets s_user_ns.  Then additional restrictions
  are added that are possible now that the filesystem superblock
  contains owner information.

  These changes should not affect anyone in practice, but there are some
  parts of these restrictions that are changes in behavior.

   - Andy's restriction on suid executables that does not honor the
     suid bit when the path is from another mount namespace (think
     /proc/[pid]/fd/) or when the filesystem was mounted by a less
     privileged user.

   - The replacement of the user namespace implicit setting of MNT_NODEV
     with implicitly setting SB_I_NODEV on the filesystem superblock
     instead.

     Using SB_I_NODEV is a stronger form that happens to make this state
     user invisible.  The user visibility can be managed but it caused
     problems when it was introduced from applications reasonably
     expecting mount flags to be what they were set to.

  There is a little bit of work remaining before it is safe to support
  mounting filesystems with backing store in user namespaces, beyond
  what is in this set of changes.

   - Verifying the mounter has permission to read/write the block device
     during mount.

   - Teaching the integrity modules IMA and EVM to handle filesystems
     mounted with only user namespace root and to reduce trust in their
     security xattrs accordingly.

   - Capturing the mounters credentials and using that for permission
     checks in d_automount and the like.  (Given that overlayfs already
     does this, and we need the work in d_automount it make sense to
     generalize this case).

  Furthermore there are a few changes that are on the wishlist:

   - Get all filesystems supporting posix acls using the generic posix
     acls so that posix_acl_fix_xattr_from_user and
     posix_acl_fix_xattr_to_user may be removed.  [Maintainability]

   - Reducing the permission checks in places such as remount to allow
     the superblock owner to perform them.

   - Allowing the superblock owner to chown files with unmapped uids and
     gids to something that is mapped so the files may be treated
     normally.

  I am not considering even obvious relaxations of permission checks
  until it is clear there are no more corner cases that need to be
  locked down and handled generically.

  Many thanks to Seth Forshee who kept this code alive, and putting up
  with me rewriting substantial portions of what he did to handle more
  corner cases, and for his diligent testing and reviewing of my
  changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (30 commits)
  fs: Call d_automount with the filesystems creds
  fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
  evm: Translate user/group ids relative to s_user_ns when computing HMAC
  dquot: For now explicitly don't support filesystems outside of init_user_ns
  quota: Handle quota data stored in s_user_ns in quota_setxquota
  quota: Ensure qids map to the filesystem
  vfs: Don't create inodes with a uid or gid unknown to the vfs
  vfs: Don't modify inodes with a uid or gid unknown to the vfs
  cred: Reject inodes with invalid ids in set_create_file_as()
  fs: Check for invalid i_uid in may_follow_link()
  vfs: Verify acls are valid within superblock's s_user_ns.
  userns: Handle -1 in k[ug]id_has_mapping when !CONFIG_USER_NS
  fs: Refuse uid/gid changes which don't map into s_user_ns
  selinux: Add support for unprivileged mounts from user namespaces
  Smack: Handle labels consistently in untrusted mounts
  Smack: Add support for unprivileged mounts from user namespaces
  fs: Treat foreign mounts as nosuid
  fs: Limit file caps to the user namespace of the super block
  userns: Remove the now unnecessary FS_USERNS_DEV_MOUNT flag
  userns: Remove implicit MNT_NODEV fragility.
  ...
2016-07-29 15:54:19 -07:00
Kirill A. Shutemov 4595ef88d1 shmem: make shmem_inode_info::lock irq-safe
We are going to need to call shmem_charge() under tree_lock to get
accoutning right on collapse of small tmpfs pages into a huge one.

The problem is that tree_lock is irq-safe and lockdep is not happy, that
we take irq-unsafe lock under irq-safe[1].

Let's convert the lock to irq-safe.

[1] https://gist.github.com/kiryl/80c0149e03ed35dfaf26628b8e03cdbc

Link: http://lkml.kernel.org/r/1466021202-61880-34-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Hugh Dickins c01d5b3007 shmem: get_unmapped_area align huge page
Provide a shmem_get_unmapped_area method in file_operations, called at
mmap time to decide the mapping address.  It could be conditional on
CONFIG_TRANSPARENT_HUGEPAGE, but save #ifdefs in other places by making
it unconditional.

shmem_get_unmapped_area() first calls the usual mm->get_unmapped_area
(which we treat as a black box, highly dependent on architecture and
config and executable layout).  Lots of conditions, and in most cases it
just goes with the address that chose; but when our huge stars are
rightly aligned, yet that did not provide a suitable address, go back to
ask for a larger arena, within which to align the mapping suitably.

There have to be some direct calls to shmem_get_unmapped_area(), not via
the file_operations: because of the way shmem_zero_setup() is called to
create a shmem object late in the mmap sequence, when MAP_SHARED is
requested with MAP_ANONYMOUS or /dev/zero.  Though this only matters
when /proc/sys/vm/shmem_huge has been set.

Link: http://lkml.kernel.org/r/1466021202-61880-29-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 16:19:19 -07:00
Eric W. Biederman a2982cc922 vfs: Generalize filesystem nodev handling.
Introduce a function may_open_dev that tests MNT_NODEV and a new
superblock flab SB_I_NODEV.  Use this new function in all of the
places where MNT_NODEV was previously tested.

Add the new SB_I_NODEV s_iflag to proc, sysfs, and mqueuefs as those
filesystems should never support device nodes, and a simple superblock
flags makes that very hard to get wrong.  With SB_I_NODEV set if any
device nodes somehow manage to show up on on a filesystem those
device nodes will be unopenable.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:57 -05:00
Eric W. Biederman 3ee690143c ipc/mqueue: The mqueue filesystem should never contain executables
Set SB_I_NOEXEC on mqueuefs to ensure small implementation mistakes
do not result in executable on mqueuefs by accident.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:56 -05:00
Eric W. Biederman d91ee87d8d vfs: Pass data, ns, and ns->userns to mount_ns
Today what is normally called data (the mount options) is not passed
to fill_super through mount_ns.

Pass the mount options and the namespace separately to mount_ns so
that filesystems such as proc that have mount options, can use
mount_ns.

Pass the user namespace to mount_ns so that the standard permission
check that verifies the mounter has permissions over the namespace can
be performed in mount_ns instead of in each filesystems .mount method.
Thus removing the duplication between mqueuefs and proc in terms of
permission checks.  The extra permission check does not currently
affect the rpc_pipefs filesystem and the nfsd filesystem as those
filesystems do not currently allow unprivileged mounts.  Without
unpvileged mounts it is guaranteed that the caller has already passed
capable(CAP_SYS_ADMIN) which guarantees extra permission check will
pass.

Update rpc_pipefs and the nfsd filesystem to ensure that the network
namespace reference is always taken in fill_super and always put in kill_sb
so that the logic is simpler and so that errors originating inside of
fill_super do not cause a network namespace leak.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:53 -05:00
Eric W. Biederman b236017acf ipc: Initialize ipc_namespace->user_ns early.
Allow the ipc namespace initialization code to depend on ns->user_ns
being set during initialization.

In particular this allows mq_init_ns to use ns->user_ns for permission
checks and initializating s_user_ns while the the mq filesystem is
being mounted.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Suggested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-06-23 15:41:53 -05:00