we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.
hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: Idan Kedar <idank@tonian.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.
The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_matching_lsegs_invalid() resets the mds_threshold counters and can
dereference the layout hdr on an initial empty plh_segs list. It returns 0 both
in the case of an initial empty list and in a non-emtpy list that was cleared
by calls to mark_lseg_invalid.
Don't send a LAYOUTRETURN if the list was initially empty.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.
Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The call to try_module_get() dereferences ld_type outside the
spin locks, which means that it may be pointing to garbage if
a module unload was in progress.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently there is a 'chicken and egg' issue when the DS is also the mounted
MDS. The nfs_match_client() reference from nfs4_set_ds_client bumps the
cl_count, the nfs_client is not freed at umount, and nfs4_deviceid_purge_client
is not called to dereference the MDS usage of a deviceid which holds a
reference to the DS nfs_client. The result is the umount program returns,
but the nfs_client is not freed, and the cl_session hearbeat continues.
The MDS (and all other nfs mounts) lose their last nfs_client reference in
nfs_free_server when the last nfs_server (fsid) is umounted.
The file layout DS lose their last nfs_client reference in destroy_ds
when the last deviceid referencing the data server is put and destroy_ds is
called. This is triggered by a call to nfs4_deviceid_purge_client which
removes references to a pNFS deviceid used by an MDS mount.
The fix is to track how many pnfs enabled filesystems are mounted from
this server, and then to purge the device id cache once that count reaches
zero.
Reported-by: Jorge Mora <Jorge.Mora@netapp.com>
Reported-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server. Currently, the layout must be
destroyed before a new layout can be obtained.
This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.
Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Let the MDS know that you are redirecting I/O from pNFS to MDS.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.
Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the error handling for nfs_generic_pagein() into a single function.
Ditto for nfs_generic_flush().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
If the allocation of nfs_write_header fails, the list of nfs_pages that
needs to be cleaned up is still on desc->pg_list...
Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Fred Isaman <iisaman@netapp.com>
The coalesce code made assumptions that will no longer be true once
non-page aligned io occurs. This introduces no change in
current behavior, but allows for more general situations to come.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Factors out the code that will need to change when directio
starts using these code paths. This will allow directio to use
the generic pagein and flush routines
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Decouple nfs_pgio_header and nfs_write_data, and have (possibly
multiple) nfs_write_datas each take a refcount on nfs_pgio_header.
For the moment keeps nfs_write_header as a way to preallocate a single
nfs_write_data with the nfs_pgio_header. The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.
This also fixes bug in pnfs_ld_handle_write_error. In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Decouple nfs_pgio_header and nfs_read_data, and have (possibly
multiple) nfs_read_datas each take a refcount on nfs_pgio_header.
For the moment keeps nfs_read_header as a way to preallocate a single
nfs_read_data with the nfs_pgio_header. The code doesn't need this,
and would be prettier without, but given the amount of churn I am
already introducing I didn't want to play with tuning new mempools.
This also fixes bug in pnfs_ld_handle_read_error. In the case of
desc->pg_bsize < PAGE_CACHE_SIZE, the pages list was empty, causing
replay attempt to do nothing.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to avoid duplicating all the data in nfs_read_data whenever we
split it up into multiple RPC calls (either due to a short read result
or due to rsize < PAGE_SIZE), we split out the bits that are the same
per RPC call into a separate "header" structure.
The goal this patch moves towards is to have a single header
refcounted by several rpc_data structures. Thus, want to always refer
from rpc_data to the header, and not the other way. This patch comes
close to that ideal, but the directio code currently needs some
special casing, isolated in the nfs_direct_[read_write]hdr_release()
functions. This will be dealt with in a future patch.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The two functions had diverged quite a bit, with the write function
being a bit more robust than the read.
However, these still break badly in the desc->pg_bsize < PAGE_CACHE_SIZE case,
as then there is nothing hanging on the data->pages list, and the resend
ends up doing nothing. This will be fixed in a patch later in the series.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move more pnfs-isms out of the generic commit code.
Bugfixes:
- filelayout_scan_commit_lists doesn't need to get/put the lseg.
In fact since it is run under the inode->i_lock, the lseg_put()
can deadlock.
- Ensure that we distinguish between what needs to be done for
commit-to-data server and what needs to be done for commit-to-MDS
using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
put_lseg() on a bucket for a struct nfs_page that got written
through the MDS.
- Fix a case where we were using list_del() on an nfs_page->wb_list
instead of list_del_init().
- filelayout_initiate_commit needs to call filelayout_commit_release
on error instead of the mds_ops->rpc_release(). Otherwise it won't
clear the commit lock.
Cleanups:
- Let the files layout manage the commit lists for the pNFS case.
Don't expose stuff like pnfs_choose_commit_list, and the fact
that the commit buckets hold references to the layout segment
in common code.
- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
into the pNFS layer from whence they came.
- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>
Replace the union with the common struct stateid4 as defined in both
RFC3530 and RFC5661. This makes it easier to access the sequence id,
which will again make implementing support for parallel OPEN calls
easier.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFS4CLNT_LAYOUTRECALL tests in pnfs_layout_process and
pnfs_update_layout are redundant.
In the case of a bulk layout recall, we're always testing for
the NFS_LAYOUT_BULK_RECALL flay anyway.
In the case of a file or segment recall, the call to
pnfs_set_layout_stateid() updates the layout_header 'barrier'
sequence id, which triggers the test in pnfs_layoutgets_blocked()
and is less race-prone than NFS4CLNT_LAYOUTRECALL anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch addresses printks that have some context to show that they are
from fs/nfs/, but for the sake of consistency now start with NFS:
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We have no business doing any this in the standard write release path.
Get rid of it, and put it in the pNFS layer.
Also, while we're at it, get rid of the completely bogus unlock/relock
semantics that were present in nfs_writeback_release_full(). It is
not only unnecessary, but actually dangerous to release the write lock
just in order to take it again in nfs_page_async_flush(). Better just
to open code the pgio operations in a pnfs helper.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.
This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
because this code is never called outside of pnfs.c and pnfs IO
paths)
Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.
[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Revert pnfs ugliness from the generic NFS read code path
SUNRPC: destroy freshly allocated transport in case of sockaddr init error
NFS: Fix a regression in the referral code
nfs: move nfs_file_operations declaration to bottom of file.c (try #2)
nfs: when attempting to open a directory, fall back on normal lookup (try #5)
pNFS-specific code belongs in the pnfs layer. It should not be
hijacking generic NFS read or write code paths.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
Revert "tracing: Include module.h in define_trace.h"
irq: don't put module.h into irq.h for tracking irqgen modules.
bluetooth: macroize two small inlines to avoid module.h
ip_vs.h: fix implicit use of module_get/module_put from module.h
nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
include: replace linux/module.h with "struct module" wherever possible
include: convert various register fcns to macros to avoid include chaining
crypto.h: remove unused crypto_tfm_alg_modname() inline
uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
pm_runtime.h: explicitly requires notifier.h
linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
miscdevice.h: fix up implicit use of lists and types
stop_machine.h: fix implicit use of smp.h for smp_processor_id
of: fix implicit use of errno.h in include/linux/of.h
of_platform.h: delete needless include <linux/module.h>
acpi: remove module.h include from platform/aclinux.h
miscdevice.h: delete unnecessary inclusion of module.h
device_cgroup.h: delete needless include <linux/module.h>
net: sch_generic remove redundant use of <linux/module.h>
net: inet_timewait_sock doesnt need <linux/module.h>
...
Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in
- drivers/media/dvb/frontends/dibx000_common.c
- drivers/media/video/{mt9m111.c,ov6650.c}
- drivers/mfd/ab3550-core.c
- include/linux/dmaengine.h
Some files were using the complete module.h infrastructure without
actually including the header at all. Fix them up in advance so
once the implicit presence is removed, we won't get failures like this:
CC [M] fs/nfsd/nfssvc.o
fs/nfsd/nfssvc.c: In function 'nfsd_create_serv':
fs/nfsd/nfssvc.c:335: error: 'THIS_MODULE' undeclared (first use in this function)
fs/nfsd/nfssvc.c:335: error: (Each undeclared identifier is reported only once
fs/nfsd/nfssvc.c:335: error: for each function it appears in.)
fs/nfsd/nfssvc.c: In function 'nfsd':
fs/nfsd/nfssvc.c:555: error: implicit declaration of function 'module_put_and_exit'
make[3]: *** [fs/nfsd/nfssvc.o] Error 1
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Current pnfs_layoutcommit_inode can not handle parallel layoutcommit.
And as Trond suggested , there is no need for client to optimize for
parallel layoutcommit. So add NFS_INO_LAYOUTCOMMITTING flag to
mark inflight layoutcommit and serialize lalyoutcommit with it.
Also mark_inode_dirty_sync if pnfs_layoutcommit_inode fails to issue
layoutcommit.
Reported-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
file layout and block layout both use it to set mark layout io failure
bit. So make it generic.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: Andy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.
[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There can be multiple lseg per file, so layoutcommit should be
able to handle it.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need to save it for every lseg.
[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use nfs_pageio_reset_read_mds and nfs_pageio_reset_write_mds instead of
completely reinitialising the struct nfs_pageio_descriptor.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since we take a reference to it, we really ought to pass the a pointer to
the layout header in the arguments instead of assuming that
NFS_I(inode)->layout will forever point to the correct object.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to ensure that the layouts are set up before we can decide to
coalesce requests. To do so, we want to further split up the struct
nfs_pageio_descriptor operations into an initialisation callback, a
coalescing test callback, and a 'do i/o' callback.
This patch cleans up the existing callback methods before adding the
'initialisation' callback.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Layouts should be tracked per nfs_server (aka superblock)
instead of per struct nfs_client, which may have multiple FSIDs associated
with it.
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
1. If the intention is to coalesce requests 'prev' and 'req' then we
have to ensure at least that we have a layout starting at
req_offset(prev).
2. If we're only requesting a minimal layout of length desc->pg_count,
we need to test the length actually returned by the server before
we allow the coalescing to occur.
3. We need to deal correctly with (pgio->lseg == NULL)
4. Fixup the test guarding the pnfs_update_layout.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_matching_lsegs_invalid could put the last ref to the layout, so
the get_layout_hdr needs to be called first.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We always get a reference on the layout header and we rely on
nfs4_layoutreturn_release to put it. If we hit an allocation error
before starting the rpc proc we bail out early without dereferncing
the layout header properly.
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The break condition to skip out of the loop got broken when cmp_layout
was change. Essentially, we want to stop looking once we know no layout
on the remainder of the list can match the first byte of the looked-up
range.
Reported-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Benny Halevy <benny@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
_pnfs_return_layout had the following problems:
- it did not call pnfs_free_lseg_list on all paths
- it unintentionally did a forgetful return when there was no outstanding io
- it raced with concurrent LAYOUTGETS
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use common code for pnfs_pageio_init_{read,write} and use
a common generic pg_test function.
Note that this function always assumes the the layout driver's
pg_test method is implemented.
[Fix BUG]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
NFSv4.1 LAYOUTRETURN implementation
Currently, does not support layout-type payload encoding.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Non-rpc layout driver such as for objects and blocks
implement their own I/O path and error handling logic.
Therefore bypass NFS-based error handling for these layout drivers.
[fix lseg ref-count bugs, and null de-refs]
[Fall out from: non-rpc layout drivers]
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
[get rid of PNFS_USE_RPC_CODE]
[get rid of __nfs4_write_done_cb]
[revert useless change in nfs4_write_done_cb]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Add offset and count parameters to pnfs_update_layout and use them to get
the layout in the pageio path.
Order cache layout segments in the following order:
* offset (ascending)
* length (descending)
* iomode (RW before READ)
Test byte range against the layout segment in use in pnfs_{read,write}_pg_test
so not to coalesce pages not using the same layout segment.
[fix lseg ordering]
[clean up pnfs_find_lseg lseg arg]
[remove unnecessary FIXME]
[fix ordering in pnfs_insert_layout]
[clean up pnfs_insert_layout]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
A client sends offset to MDS as it was seen by DS. As result,
file size after copy is only half of original file size in case
of 2 DS.
Signed-off-by: Vitaliy Gusev <gusev.vitaliy@nexenta.com>
Cc: stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, writebacks may end up recursing back into the filesystem due to
GFP_KERNEL direct reclaims in the pnfs subsystem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevents an infinite loop as list was never emptied.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
mark_inode_dirty_sync() grabs the same inode lock!
race conditions between holding the lock in pnfs_set_layoutcommit() and in
mark_inode_dirty_sync() can result in a second call to pnfs_layoutcommit_inode(), but
this will be a noop as NFS_INO_LAYOUTCOMMIT won't be set in the second call
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
- not use vmap, which doesn't work on incoherent archs
- use xdr_stream parsing for all xdr
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Test NFS_INO_LAYOUTCOMMIT before kzalloc
Mark inode dirty to retry LAYOUTCOMMIT on kzalloc failure.
Add comments.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.
Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement all the hooks created in the previous patches.
This requires exporting quite a few functions and adding a few
structure fields.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If a data server is unavailable, go through MDS.
Mark the deviceid containing the data server as a negative cache entry.
Do not try to connect to any data server on a deviceid marked as a negative
cache entry. Mark any layout that tries to use the marked deviceid as failed.
Inodes with a layout marked as fails will not use the layout for I/O, and will
not perform any more layoutgets.
Inodes without a layout will still do layoutget, but the layout will get
marked immediately.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate the rpc run portion of nfs_read_rpcsetup into a new function
nfs_initiate_read that is called for normal NFS I/O.
Add a pNFS read_pagelist function that is called instead of nfs_intitate_read
for pNFS reads.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Mingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the pnfs_update_layout call location to nfs_pageio_do_add_request().
Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach
it to each nfs_read_data so it can be sent to the layout driver.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare put_lseg and get_lseg to be called from the pNFS I/O code.
Pull common code from pnfs_lseg_locked to call from pnfs_lseg.
Inline pnfs_lseg_locked into it's only caller.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevents an Oops triggered by CB_LAYOUTRECALL and LAYOUTGET race on a
pnfs_layout_hdr first pnfs_layout_segment.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The pnfs code was using throughout the lock order i_lock, cl_lock.
This conflicts with the nfs delegation code. Rework the pnfs code
to avoid taking both locks simultaneously.
Currently the code takes the double lock to add/remove the layout to a
nfs_client list, while atomically checking that the list of lsegs is
empty. To avoid this, we rely on existing serializations. When a
layout is initialized with lseg count equal zero, LAYOUTGET's
openstateid serialization is in effect, making it safe to assume it
stays zero unless we change it. And once a layout's lseg count drops
to zero, it is set as DESTROYED and so will stay at zero.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We do not need to clear the NFS_LAYOUT_BULK_RECALL, as setting it
guarantees that NFS_LAYOUT_DESTROYED will be set once any outstanding
io is finished.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The code could violate the following from RFC5661, section 12.5.3:
"Once a client has no more layouts on a file, the layout stateid is no
longer valid and MUST NOT be used."
This can occur when a layout already has a lseg, starts another
non-everlapping LAYOUTGET, and a CB_LAYOUTRECALL for the existing lseg
is processed before we hit pnfs_layout_process().
Solve by setting, each time the client has no more lsegs for a file, a
flag which blocks further use of the layout and triggers its removal.
This also fixes a second bug which occurs in the same instance as
above. If we actually use pnfs_layout_process, we add the new lseg to
the layout, but the layout has been removed from the nfs_client list
by the intervening CB_LAYOUTRECALL and will not be added back. Thus
the newly acquired lseg will not be properly returned in the event of
a subsequent CB_LAYOUTRECALL.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
What we really want to know is the ref count.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A layout can request return-on-close. How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close. In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is the heart of the wave 2 submission. Add the code to trigger
drain and forget of any afected layouts. In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored. This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Either a bad server reply, or our ignoring of multiple array segments in
a reply, can cause a reply to not meet our requirements. Ensure
that we ignore such replies.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since this list will be used to search for layouts to recall,
this is necessary to avoid a race where the recall comes in,
sees there is nothing in the client list, and prepares to return
NOMATCHING, while the LAYOUTGET gets processed before the recall
updates the stateid.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed. This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This is to prepare the way for sensible io draining. Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list. Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Idan Kedar
Bryan Schumaker
Andy Adamson
Trond Myklebust
Fred Isaman
Weston Andros Adamson
Boaz Harrosh
Linus Torvalds
Paul Gortmaker
Peng Tao
Benny Halevy
Peng Tao
Benny Halevy
Vitaliy Gusev
Christoph Hellwig