Patch series "kasan: memorize and print call_rcu stack", v8.
This patchset improves KASAN reports by making them to have call_rcu()
call stack information. It is useful for programmers to solve
use-after-free or double-free memory issue.
The KASAN report was as follows(cleaned up slightly):
BUG: KASAN: use-after-free in kasan_rcu_reclaim+0x58/0x60
Freed by task 0:
kasan_save_stack+0x24/0x50
kasan_set_track+0x24/0x38
kasan_set_free_info+0x18/0x20
__kasan_slab_free+0x10c/0x170
kasan_slab_free+0x10/0x18
kfree+0x98/0x270
kasan_rcu_reclaim+0x1c/0x60
Last call_rcu():
kasan_save_stack+0x24/0x50
kasan_record_aux_stack+0xbc/0xd0
call_rcu+0x8c/0x580
kasan_rcu_uaf+0xf4/0xf8
Generic KASAN will record the last two call_rcu() call stacks and print up
to 2 call_rcu() call stacks in KASAN report. it is only suitable for
generic KASAN.
This feature considers the size of struct kasan_alloc_meta and
kasan_free_meta, we try to optimize the structure layout and size, lets it
get better memory consumption.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
This patch (of 4):
This feature will record the last two call_rcu() call stacks and prints up
to 2 call_rcu() call stacks in KASAN report.
When call_rcu() is called, we store the call_rcu() call stack into slub
alloc meta-data, so that the KASAN report can print rcu stack.
[1]https://bugzilla.kernel.org/show_bug.cgi?id=198437
[2]https://groups.google.com/forum/#!searchin/kasan-dev/better$20stack$20traces$20for$20rcu%7Csort:date/kasan-dev/KQsjT_88hDE/7rNUZprRBgAJ
[walter-zh.wu@mediatek.com: build fix]
Link: http://lkml.kernel.org/r/20200710162401.23816-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200710162123.23713-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050847.1096-1-walter-zh.wu@mediatek.com
Link: http://lkml.kernel.org/r/20200601050927.1153-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
-----BEGIN PGP SIGNATURE-----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=p6ry
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rcu fixlet from Thomas Gleixner:
"A single fix for a printk format warning in RCU"
* tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuperf: Fix printk format warning
RCU is supposed to be watching all non-idle kernel code and also all
softirq handlers. This commit adds some teeth to this statement by
adding a WARN_ON_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Coccinelle reports a warning
WARNING: Assignment of 0/1 to bool variable
The root cause is that the variable lastphase is a bool, but is
initialised with integer 0. This commit therefore replaces the 0 with
a false.
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the rcu_torture_current variable remains non-NULL until after
all readers have stopped. During this time, rcu_torture_stats_print()
will think that the test is still ongoing, which can result in confusing
dmesg output. This commit therefore NULLs rcu_torture_current immediately
after the rcu_torture_writer() kthread has decided to stop, thus informing
rcu_torture_stats_print() much sooner.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Several variants of Linux-kernel RCU interact with task-exit processing,
including preemptible RCU, Tasks RCU, and Tasks Trace RCU. This commit
therefore adds testing of this interaction to rcutorture by adding
rcutorture.read_exit_burst and rcutorture.read_exit_delay kernel-boot
parameters. These kernel parameters control the frequency and spacing
of special read-then-exit kthreads that are spawned.
[ paulmck: Apply feedback from Dan Carpenter's static checker. ]
[ paulmck: Reduce latency to avoid false-positive shutdown hangs. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
SRCU disables interrupts to get a stable per-CPU pointer and then
acquires the spinlock which is in the per-CPU data structure. The
release uses spin_unlock_irqrestore(). While this is correct on a non-RT
kernel, this conflicts with the RT semantics because the spinlock is
converted to a 'sleeping' spinlock. Sleeping locks can obviously not be
acquired with interrupts disabled.
Acquire the per-CPU pointer `ssp->sda' without disabling preemption and
then acquire the spinlock_t of the per-CPU data structure. The lock will
ensure that the data is consistent.
The added call to check_init_srcu_struct() is now needed because a
statically defined srcu_struct may remain uninitialized until this
point and the newly introduced locking operation requires an initialized
spinlock_t.
This change was tested for four hours with 8*SRCU-N and 8*SRCU-P without
causing any warnings.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: rcu@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit further avoids conflation of refperf with the kernel's perf
feature by renaming kernel/rcu/refperf.c to kernel/rcu/refscale.c,
and also by similarly renaming the functions and variables inside
this file. This has the side effect of changing the names of the
kernel boot parameters, so kernel-parameters.txt and ver_functions.sh
are also updated.
The rcutorture --torture type remains refperf, and this will be
addressed in a separate commit.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The old Kconfig option name is all too easy to conflate with the
unrelated "perf" feature, so this commit renames RCU_REF_PERF_TEST to
RCU_REF_SCALE_TEST.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The synchronize_rcu_tasks_trace() header comment incorrectly claims that
any number of things delimit RCU Tasks Trace read-side critical sections,
when in fact only rcu_read_lock_trace() and rcu_read_unlock_trace() do so.
This commit therefore fixes this comment, and, while in the area, fixes
a typo in the rcu_read_lock_trace() header comment.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds testing for RCU Tasks readers to the refperf module.
This also applies to RCU Rude readers, as both flavors have empty
(as in non-existent) read-side markers.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current units of microseconds are too coarse, so this commit
changes the units to nanoseconds. However, ndelay is used only for the
nanoseconds with udelay being used for whole microseconds. For example,
setting refperf.readdelay=1500 results in a udelay(1) followed by an
ndelay(500).
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
[ paulmck: Abstracted delay per Akira feedback and move from 80 to 100 lines. ]
[ paulmck: Fix names as suggested by kbuild test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
A 64-bit division was introduced in refperf, breaking compilation
on all 32-bit architectures:
kernel/rcu/refperf.o: in function `main_func':
refperf.c:(.text+0x57c): undefined reference to `__aeabi_uldivmod'
Fix this by using div_u64 to mark the expensive operation.
[ paulmck: Update primitive and format per Nathan Chancellor. ]
Fixes: bd5b16d6c88d ("refperf: Allow decimal nanoseconds")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
With the various measurement optimizations, 10,000 loops normally
suffices. This commit therefore reduces the refperf.loops default value
from 10,000,000 to 10,000.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a refperf.readdelay module parameter that controls the
duration of each critical section. This parameter allows gathering data
showing how the performance differences between the various primitives
vary with critical-section length.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the reader-launch wait loop from ref_perf_init()
to main_func(), removing one layer of wakeup and allowing slightly
faster system boot.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The experiment-number column is currently labeled "Threads", which is
misleading at best. This commit therefore relabels it as "Runs", and
adjusts the scripts accordingly.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit causes all the readers to start running unmeasured load
until all readers have done at least one such run (thus having warmed
up), then run the measured load, and then run unmeasured load until all
readers have completed their measured load. This approach avoids any
thread running measured load while other readers are idle.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, readers are awakened individually. On most systems, this
results in significant wakeup delay from one reader to the next, which
can result in the first and last reader having sole access to the
synchronization primitive in question. If that synchronization primitive
involves shared memory, those readers will rack up a huge number of
operations in a very short time, causing large perturbations in the
results.
This commit therefore has the readers busy-wait after being awakened,
and uses a new n_started variable to synchronize their start times.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts the reader_task structure's "start" field to int
in order to demote a full barrier to an smp_load_acquire() and also to
simplify the code a bit. While in the area, and to enlist the compiler's
help in ensuring that nothing was missed, the field's name was changed
to start_reader.
Also while in the area, change the main_func() store to use
smp_store_release() to further fortify against wait/wake races.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves a printk() out of the measurement interval, converts
a atomic_dec()/atomic_read() pair to atomic_dec_and_test(), and adds
a smp_mb__before_atomic() to avoid potential wake/wait hangs. These
changes have the added benefit of reducing the number of loops required
for amortizing loop overhead for CONFIG_PREEMPT=n RCU measurements from
1,000,000 to 10,000. This reduction in turn shortens the test, reducing
the probability of interference.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because the reset_readers() and process_durations() functions are used
only within kernel/rcu/refperf.c, this commit makes them static.
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the buffer used to accumulate the thread-summary output is
fixed size, which will cause problems if someone decides to run on a large
number of PCUs. This commit therefore dynamically allocates this buffer.
[ paulmck: Fix memory allocation as suggested by KASAN. ]
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the buffer used to accumulate the experiment-summary output
is fixed size, which will cause problems if someone decides to run
one hundred experiments. This commit therefore dynamically allocates
this buffer.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current code uses the number of threads both to limit the number
of threads and to specify the number of experiments, but also varies
the number of threads as the experiments progress. This commit takes
a different approach by adding an refperf.nruns module parameter that
specifies the number of experiments, and furthermore uses the same
number of threads for each experiment.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts nreaders to a module parameter, with the default
of -1 specifying the old behavior of using 75% of the readers.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The CONFIG_PREEMPT=n rcu_read_lock()/rcu_read_unlock() pair's overhead,
even including loop overhead, is far less than one nanosecond.
Since logscale plots are not all that happy with zero values, provide
picoseconds as decimals.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Current runs show PREEMPT=n rcu_read_lock()/rcu_read_unlock() pairs
consuming between 20 and 30 nanoseconds, when in fact the actual value is
zero, give or take the barrier() asm's effect on compiler optimizations.
The additional overhead is caused by function calls through pointers
(especially in these days of Spectre mitigations) and perhaps also
needless argument passing, a non-const loop limit, and an upcounting loop.
This commit therefore combines the ->readlock() and ->readunlock()
function pointers into a single ->readsection() function pointer that
takes the loop count as a const parameter and keeps any data passed
from the read-lock to the read-unlock internal to this new function.
These changes reduce the measured overhead of the aforementioned
PREEMPT=n rcu_read_lock()/rcu_read_unlock() pairs from between 20 and
30 nanoseconds to somewhere south of 500 picoseconds.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds an rcuperf module parameter named "holdoff" that
defaults to 10 seconds if refperf is built in and to zero otherwise.
The assumption is that all the CPUs are online by the time that the
modprobe and insmod commands are going to do anything, and that normal
systems will have all the CPUs online within ten seconds.
Larger systems may take many tens of seconds or even minutes to get
to this point, hence this being a module parameter instead of being a
hard-coded constant.
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds comments explaining why the readers have otherwise insane
levels of measurement overhead, namely that they are intended as a test
load for update-side performance measurements, not as a straight-up
read-side performance test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Add a test for comparing the performance of RCU with various read-side
synchronization mechanisms. The test has proved useful for collecting
data and performing these comparisons.
Currently RCU, SRCU, reader-writer lock, reader-writer semaphore and
reference counting can be measured using refperf.perf_type parameter.
Each invocation of the test runs measures performance of a specific
mechanism.
The maximum number of CPUs to concurrently run readers on is chosen by
the test itself and is 75% of the total number of CPUs. So if you had 24
CPUs, the test runs with a maximum of 18 parallel readers.
A number of experiments are conducted, and in each experiment, the
number of readers is increased by 1, upto the 75% of CPUs mark. During
each experiment, all readers execute an empty loop with refperf.loops
iterations and time the total loop duration. This is then averaged.
Example output:
Parameters "refperf.perf_type=srcu refperf.loops=2000000" looks like:
[ 3.347133] srcu-ref-perf:
[ 3.347133] Threads Time(ns)
[ 3.347133] 1 36
[ 3.347133] 2 34
[ 3.347133] 3 34
[ 3.347133] 4 34
[ 3.347133] 5 33
[ 3.347133] 6 33
[ 3.347133] 7 33
[ 3.347133] 8 33
[ 3.347133] 9 33
[ 3.347133] 10 33
[ 3.347133] 11 33
[ 3.347133] 12 33
[ 3.347133] 13 33
[ 3.347133] 14 33
[ 3.347133] 15 32
[ 3.347133] 16 33
[ 3.347133] 17 33
[ 3.347133] 18 34
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
wait_event() already retries if the condition for the wake up is not
satisifed after wake up. Remove them from the rcuperf test.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit declares trc_n_readers_need_end and trc_wait static and
replaced a "&" with "&&". The "&" happened to work because the values
are bool, but accidents waiting to happen and all that...
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The show_rcu_tasks_gp_kthreads() function is not invoked by Tiny RCU,
but is nevertheless defined in Tiny RCU builds that enable Tasks Trace
RCU. This commit therefore conditionally compiles this function so
that it is defined only in builds that actually use it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although this is in some strict sense unnecessary, it is good to allow
the compiler to compare the function declaration with its definition.
This commit therefore adds a #include of linux/rcupdate_trace.h to
kernel/rcu/update.c.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_tasks_postscan() function is not used outside of RCU's tasks.h
file, so this commit makes it be static.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit converts the long-standing schedule_timeout_interruptible()
and schedule_timeout_uninterruptible() calls used by the various Tasks
RCU's grace-period kthreads to schedule_timeout_idle(). This conversion
avoids polluting the load-average with Tasks-RCU-related sleeping.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Update the kvfree_call_rcu() function with head-less support.
This allows RCU to reclaim objects without an embedded rcu_head.
tree-RCU:
We introduce two chains of arrays to store SLAB-backed and vmalloc
pointers, each. Storage in either of these arrays does not require
embedding an rcu_head within the object.
Maintaining the arrays may become impossible due to high memory
pressure. For such cases there is an emergency path. Objects with
rcu_head inside are just queued on a backup rcu_head list. Later on
that list is drained. As for the head-less variant, as the current
context can sleep, the following emergency measures are applied:
a) Synchronously wait until a grace period has elapsed.
b) Call kvfree().
tiny-RCU:
For double argument calls, there are no new changes in behavior. For
single argument call, kvfree() is directly inlined on the current
stack after a synchronize_rcu() call. Note that for tiny-RCU, any
call to synchronize_rcu() is actually a quiescent state, therefore
it does nothing.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The following changes are introduced:
1. Rename rcu_invoke_kfree_callback() to rcu_invoke_kvfree_callback(),
as well as the associated trace events, so the rcu_kfree_callback(),
becomes rcu_kvfree_callback(). The reason is to be aligned with kvfree()
notation.
2. Rename __is_kfree_rcu_offset to __is_kvfree_rcu_offset. All RCU
paths use kvfree() now instead of kfree(), thus rename it.
3. Rename kfree_call_rcu() to the kvfree_call_rcu(). The reason is,
it is capable of freeing vmalloc() memory now. Do the same with
__kfree_rcu() macro, it becomes __kvfree_rcu(), the goal is the
same.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Replace kfree() with kvfree() in rcu_reclaim_tiny().
This makes it possible to release either SLAB or vmalloc
objects after a GP.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
To do so, we use an array of kvfree_rcu_bulk_data structures.
It consists of two elements:
- index number 0 corresponds to slab pointers.
- index number 1 corresponds to vmalloc pointers.
Keeping vmalloc pointers separated from slab pointers makes
it possible to invoke the right freeing API for the right
kind of pointer.
It also prepares us for future headless support for vmalloc
and SLAB objects. Such objects cannot be queued on a linked
list and are instead directly into an array.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In order to reduce the dynamic need for pages in kfree_rcu(),
pre-allocate a configurable number of pages per CPU and link
them in a list. When kfree_rcu() reclaims objects, the object's
container page is cached into a list instead of being released
to the low-level page allocator.
Such an approach provides O(1) access to free pages while also
reducing the number of requests to the page allocator. It also
makes the kfree_rcu() code to have free pages available during
a low memory condition.
A read-only sysfs parameter (rcu_min_cached_objs) reflects the
minimum number of allowed cached pages per CPU.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The per-CPU variable is initialized at runtime in
kfree_rcu_batch_init(). This function is invoked before
'rcu_scheduler_active' is set to 'RCU_SCHEDULER_RUNNING'.
After the initialisation, '->initialized' is to true.
The raw_spin_lock is only acquired if '->initialized' is
set to true. The worqueue item is only used if 'rcu_scheduler_active'
set to RCU_SCHEDULER_RUNNING which happens after initialisation.
Use a static initializer for krc.lock and remove the runtime
initialisation of the lock. Since the lock can now be always
acquired, remove the '->initialized' check.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Introduce helpers to lock and unlock per-cpu "kfree_rcu_cpu"
structures. That will make kfree_call_rcu() more readable
and prevent programming errors.
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We can simplify KFREE_BULK_MAX_ENTR macro and get rid of
magic numbers which were used to make the structure to be
exactly one page.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Walter Wu
Linus Torvalds
Ingo Molnar
Paul E. McKenney
Jules Irenge
Sebastian Andrzej Siewior
Ethon Paul
Arnd Bergmann
Joel Fernandes (Google)
Uladzislau Rezki (Sony)