make[2]: *** No rule to make target 'install'. Stop.
make[1]: *** [Makefile:122: runqslower_install] Error 2
make: *** [Makefile:116: bpf_install] Error 2
There is no rule for target 'install' in tools/bpf/runqslower/Makefile,
and there is no need to install it, so just remove 'runqslower_install'.
Fixes: 9c01546d26 ("tools/bpf: Add runqslower tool to tools/bpf")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210628030409.3459095-1-liwei391@huawei.com
Commit 2f064a59a1 ("sched: Change task_struct::state") renamed task->state
to task->__state in task_struct. Fix runqslower to use the new name of the
field.
Fixes: 2f064a59a1 ("sched: Change task_struct::state")
Signed-off-by: SanjayKumar Jeyakumar <vjsanjay@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210707052914.21473-1-vjsanjay@gmail.com
va_list 'ap' was opened but not closed by va_end() in error case. It should
be closed by va_end() before the return.
Fixes: aa52bcbe0e ("tools: bpftool: Fix json dump crash on powerpc")
Signed-off-by: Gu Shengxian <gushengxian@yulong.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210706013543.671114-1-gushengxian507419@gmail.com
Trivial conflict in net/netfilter/nf_tables_api.c.
Duplicate fix in tools/testing/selftests/net/devlink_port_split.py
- take the net-next version.
skmsg, and L4 bpf - keep the bpf code but remove the flags
and err params.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vmlinux ".BTF_ids" ELF section is declared in btf_ids.h to hold a list
of zero-filled BTF IDs, which is then patched at link-time with correct
values by resolv_btfids. The section is flagged as "allocable" to preclude
compression, but notably the section contents (BTF IDs) are untyped.
When patching the BTF IDs, resolve_btfids writes in host-native endianness
and relies on libelf for any required translation on reading and updating
vmlinux. However, since the type of the .BTF_ids section content defaults
to ELF_T_BYTE (i.e. unsigned char), no translation occurs. This results in
incorrect patched values when cross-compiling to non-native endianness,
and can manifest as kernel Oops and test failures which are difficult to
troubleshoot [1].
Explicitly set the type of patched data to ELF_T_WORD, the architecture-
neutral ELF type corresponding to the u32 BTF IDs. This enables libelf to
transparently perform any needed endian conversions.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frank Eigler <fche@redhat.com>
Cc: Mark Wielaard <mark@klomp.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/CAPGftE_eY-Zdi3wBcgDfkz_iOr1KF10n=9mJHm1_a_PykcsoeA@mail.gmail.com [1]
Link: https://lore.kernel.org/bpf/20210618061404.818569-1-Tony.Ambardar@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-06-17
The following pull-request contains BPF updates for your *net-next* tree.
We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).
The main changes are:
1) BPF infrastructure to migrate TCP child sockets from a listener to another
in the same reuseport group/map, from Kuniyuki Iwashima.
2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.
3) Streamline error reporting changes in libbpf as planned out in the
'libbpf: the road to v1.0' effort, from Andrii Nakryiko.
4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.
5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.
6) Support new LLVM relocations in libbpf to make them more linker friendly,
also add a doc to describe the BPF backend relocations, from Yonghong Song.
7) Silence long standing KUBSAN complaints on register-based shifts in
interpreter, from Daniel Borkmann and Eric Biggers.
8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
target arch cannot be determined, from Lorenz Bauer.
9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.
10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.
11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 668da745af ("tools: bpftool: add support for quotations ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
When the bootstrap and final bpftool have different architectures, we
need to build two distinct disasm.o objects. Add a recipe for the
bootstrap disasm.o.
After commit d510296d33 ("bpftool: Use syscall/loader program in
"prog load" and "gen skeleton" command.") cross-building bpftool didn't
work anymore, because the bootstrap bpftool was linked using objects
from different architectures:
$ make O=/tmp/bpftool ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/bpftool/ V=1
[...]
aarch64-linux-gnu-gcc ... -c -MMD -o /tmp/bpftool/disasm.o /home/z/src/linux/kernel/bpf/disasm.c
gcc ... -c -MMD -o /tmp/bpftool//bootstrap/main.o main.c
gcc ... -o /tmp/bpftool//bootstrap/bpftool /tmp/bpftool//bootstrap/main.o ... /tmp/bpftool/disasm.o
/usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
/usr/bin/ld: /tmp/bpftool/disasm.o: error adding symbols: file in wrong format
collect2: error: ld returned 1 exit status
[...]
The final bpftool was built for e.g. arm64, while the bootstrap bpftool,
executed on the host, was built for x86. The problem here was that disasm.o
linked into the bootstrap bpftool was arm64 rather than x86. With the fix
we build two disasm.o, one for the target bpftool in arm64, and one for
the bootstrap bpftool in x86.
Fixes: d510296d33 ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210603170515.1854642-1-jean-philippe@linaro.org
Follow libbpf's error handling conventions and pass through errors and errno
properly. Skeleton code always returned NULL on errors (not ERR_PTR(err)), so
there are no backwards compatibility concerns. But now we also set errno
properly, so it's possible to distinguish different reasons for failure, if
necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-6-andrii@kernel.org
The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.
Fixes: db94cc0b48 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
Add -L flag to bpftool to use libbpf gen_trace facility and syscall/loader program
for skeleton generation and program loading.
"bpftool gen skeleton -L" command will generate a "light skeleton" or "loader skeleton"
that is similar to existing skeleton, but has one major difference:
$ bpftool gen skeleton lsm.o > lsm.skel.h
$ bpftool gen skeleton -L lsm.o > lsm.lskel.h
$ diff lsm.skel.h lsm.lskel.h
@@ -5,34 +4,34 @@
#define __LSM_SKEL_H__
#include <stdlib.h>
-#include <bpf/libbpf.h>
+#include <bpf/bpf.h>
The light skeleton does not use majority of libbpf infrastructure.
It doesn't need libelf. It doesn't parse .o file.
It only needs few sys_bpf wrappers. All of them are in bpf/bpf.h file.
In future libbpf/bpf.c can be inlined into bpf.h, so not even libbpf.a would be
needed to work with light skeleton.
"bpftool prog load -L file.o" command is introduced for debugging of syscall/loader
program generation. Just like the same command without -L it will try to load
the programs from file.o into the kernel. It won't even try to pin them.
"bpftool prog load -L -d file.o" command will provide additional debug messages
on how syscall/loader program was generated.
Also the execution of syscall/loader program will use bpf_trace_printk() for
each step of loading BTF, creating maps, and loading programs.
The user can do "cat /.../trace_pipe" for further debug.
An example of fexit_sleep.lskel.h generated from progs/fexit_sleep.c:
struct fexit_sleep {
struct bpf_loader_ctx ctx;
struct {
struct bpf_map_desc bss;
} maps;
struct {
struct bpf_prog_desc nanosleep_fentry;
struct bpf_prog_desc nanosleep_fexit;
} progs;
struct {
int nanosleep_fentry_fd;
int nanosleep_fexit_fd;
} links;
struct fexit_sleep__bss {
int pid;
int fentry_cnt;
int fexit_cnt;
} *bss;
};
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210514003623.28033-18-alexei.starovoitov@gmail.com
As discussed in [0], stop emitting static variables in BPF skeletons to avoid
issues with name-conflicting static variables across multiple
statically-linked BPF object files.
Users using static variables to pass data between BPF programs and user-space
should do a trivial one-time switch according to the following simple rules:
- read-only `static volatile const` variables should be converted to
`volatile const`;
- read/write `static volatile` variables should just drop `static volatile`
modifiers to become global variables/symbols. To better handle older Clang
versions, such newly converted global variables should be explicitly
initialized with a specific value or `= 0`/`= {}`, whichever is
appropriate.
[0] https://lore.kernel.org/bpf/CAEf4BzZo7_r-hsNvJt3w3kyrmmBJj7ghGY8+k4nvKF0KLjma=w@mail.gmail.com/T/#m664d4b0d6b31ac8b2669360e0fc2d6962e9f5ec1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-5-andrii@kernel.org
For better future extensibility add per-file linker options. Currently
the set of available options is empty. This changes bpf_linker__add_file()
API, but it's not a breaking change as bpf_linker APIs hasn't been released
yet.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210507054119.270888-3-andrii@kernel.org
Similarly to .rodata, strip any const/volatile/restrict modifiers when
generating BPF skeleton. They are not helpful and actually just get in the way.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210507054119.270888-2-andrii@kernel.org
Dump succinct information for each member of DATASEC: its kinds and name. This
is extremely helpful to see at a quick glance what is inside each DATASEC of
a given BTF. Without this, one has to jump around BTF data to just find out
the name of a VAR or FUNC. DATASEC's var_secinfo member is special in that
regard because it doesn't itself contain the name of the member, delegating
that to the referenced VAR and FUNC kinds. Other kinds, like
STRUCT/UNION/FUNC/ENUM, encode member names directly and thus are clearly
identifiable in BTF dump.
The new output looks like this:
[35] DATASEC '.bss' size=0 vlen=6
type_id=8 offset=0 size=4 (VAR 'input_bss1')
type_id=13 offset=0 size=4 (VAR 'input_bss_weak')
type_id=16 offset=0 size=4 (VAR 'output_bss1')
type_id=17 offset=0 size=4 (VAR 'output_data1')
type_id=18 offset=0 size=4 (VAR 'output_rodata1')
type_id=20 offset=0 size=8 (VAR 'output_sink1')
[36] DATASEC '.data' size=0 vlen=2
type_id=9 offset=0 size=4 (VAR 'input_data1')
type_id=14 offset=0 size=4 (VAR 'input_data_weak')
[37] DATASEC '.kconfig' size=0 vlen=2
type_id=25 offset=0 size=4 (VAR 'LINUX_KERNEL_VERSION')
type_id=28 offset=0 size=1 (VAR 'CONFIG_BPF_SYSCALL')
[38] DATASEC '.ksyms' size=0 vlen=1
type_id=30 offset=0 size=1 (VAR 'bpf_link_fops')
[39] DATASEC '.rodata' size=0 vlen=2
type_id=12 offset=0 size=4 (VAR 'input_rodata1')
type_id=15 offset=0 size=4 (VAR 'input_rodata_weak')
[40] DATASEC 'license' size=0 vlen=1
type_id=24 offset=0 size=4 (VAR 'LICENSE')
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-3-andrii@kernel.org
Add dumping of "extern" linkage for BTF VAR kind. Also shorten
"global-allocated" to "global" to be in line with FUNC's "global".
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210423181348.1801389-2-andrii@kernel.org
With clang compiler:
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
# build selftests/bpf or bpftool
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1
make -j60 -C tools/bpf/bpftool LLVM=1 LLVM_IAS=1
the following compilation warning showed up,
net.c:160:37: warning: comparison of integers of different signs: '__u32' (aka 'unsigned int') and 'int' [-Wsign-compare]
for (nh = (struct nlmsghdr *)buf; NLMSG_OK(nh, len);
^~~~~~~~~~~~~~~~~
.../tools/include/uapi/linux/netlink.h:99:24: note: expanded from macro 'NLMSG_OK'
(nlh)->nlmsg_len <= (len))
~~~~~~~~~~~~~~~~ ^ ~~~
In this particular case, "len" is defined as "int" and (nlh)->nlmsg_len is "unsigned int".
The macro NLMSG_OK is defined as below in uapi/linux/netlink.h.
#define NLMSG_OK(nlh,len) ((len) >= (int)sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len >= sizeof(struct nlmsghdr) && \
(nlh)->nlmsg_len <= (len))
The clang compiler complains the comparision "(nlh)->nlmsg_len <= (len))",
but in bpftool/net.c, it is already ensured that "len > 0" must be true.
So theoretically the compiler could deduce that comparison of
"(nlh)->nlmsg_len" and "len" is okay, but this really depends on compiler
internals. Let us add an explicit type conversion (from "int" to "unsigned int")
for "len" in NLMSG_OK to silence this warning right now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153435.3029635-1-yhs@fb.com
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
* make eprintf static, used only in main.c
* initialize ret in eprintf
* remove unused *tmp
v3:
* remove another err (Song Liu)
v2:
* remove unused 'int err = -1'
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210329223143.3659983-1-sdf@google.com
Add `bpftool gen object <output-file> <input_file>...` command to statically
link multiple BPF ELF object files into a single output BPF ELF object file.
This patch also updates bash completions and man page. Man page gets a short
section on `gen object` command, but also updates the skeleton example to show
off workflow for BPF application with two .bpf.c files, compiled individually
with Clang, then resulting object files are linked together with `gen object`,
and then final object file is used to generate usable BPF skeleton. This
should help new users understand realistic workflow w.r.t. compiling
mutli-file BPF application.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-10-andrii@kernel.org
Add optional name OBJECT_NAME parameter to `gen skeleton` command to override
default object name, normally derived from input file name. This allows much
more flexibility during build time.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-9-andrii@kernel.org
Somehow when bpftool is compiled in -Og mode, compiler produces new warnings
about possibly uninitialized variables. Fix all the reported problems.
Fixes: 2119f2189d ("bpftool: add C output format option to btf dump subcommand")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210313210920.1959628-3-andrii@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-09
The following pull-request contains BPF updates for your *net-next* tree.
We've added 90 non-merge commits during the last 17 day(s) which contain
a total of 114 files changed, 5158 insertions(+), 1288 deletions(-).
The main changes are:
1) Faster bpf_redirect_map(), from Björn.
2) skmsg cleanup, from Cong.
3) Support for floating point types in BTF, from Ilya.
4) Documentation for sys_bpf commands, from Joe.
5) Support for sk_lookup in bpf_prog_test_run, form Lorenz.
6) Enable task local storage for tracing programs, from Song.
7) bpf_for_each_map_elem() helper, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the following coccicheck warnings:
./tools/bpf/bpf_dbg.c:1201:55-57: WARNING !A || A && B is equivalent to
!A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/1614756035-111280-1-git-send-email-jiapeng.chong@linux.alibaba.com
This logic is used for validating the manual pages from selftests, so
move the infra under tools/testing/selftests/bpf/ and rely on selftests
for validation rather than tying it into the bpftool build.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-12-joe@cilium.io
Abstract out the target parameter so that upcoming commits, more than
just the existing "helpers" target can be called to generate specific
portions of docs from the eBPF UAPI headers.
Signed-off-by: Joe Stringer <joe@cilium.io>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210302171947.2268128-10-joe@cilium.io
Only dumping support needs to be adjusted, the code structure follows
that of BTF_KIND_INT. Example plain and JSON outputs:
[4] FLOAT 'float' size=4
{"id":4,"kind":"FLOAT","name":"float","size":4}
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210226202256.116518-5-iii@linux.ibm.com
Just like was done for bpftool and selftests in ec23eb7056 ("tools/bpftool:
Allow substituting custom vmlinux.h for the build") and ca4db6389d
("selftests/bpf: Allow substituting custom vmlinux.h for selftests build"),
allow to provide pre-generated vmlinux.h for runqslower build.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210303004010.653954-1-andrii@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace hashtab with task local storage in runqslower. This improves the
performance of these BPF programs. The following table summarizes average
runtime of these programs, in nanoseconds:
task-local hash-prealloc hash-no-prealloc
handle__sched_wakeup 125 340 3124
handle__sched_wakeup_new 2812 1510 2998
handle__sched_switch 151 208 991
Note that, task local storage gives better performance than hashtab for
handle__sched_wakeup and handle__sched_switch. On the other hand, for
handle__sched_wakeup_new, task local storage is slower than hashtab with
prealloc. This is because handle__sched_wakeup_new accesses the data for
the first time, so it has to allocate the data for task local storage.
Once the initial allocation is done, subsequent accesses, as those in
handle__sched_wakeup, are much faster with task local storage. If we
disable hashtab prealloc, task local storage is much faster for all 3
functions.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210225234319.336131-7-songliubraving@fb.com
Update the Makefile to prefer using $(O)/vmlinux, $(KBUILD_OUTPUT)/vmlinux
(for selftests) or ../../../vmlinux. These two files should have latest
definitions for vmlinux.h.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210225234319.336131-6-songliubraving@fb.com
This adds both the CONFIG_DEBUG_INFO_BTF and CONFIG_DEBUG_INFO_BTF_MODULES
kernel compile option to output of the bpftool feature command.
This is relevant for developers that want to account for data structure
definition differences between kernels.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210222195846.155483-1-grantseltzer@gmail.com
Older libelf.h and glibc elf.h might not yet define the ELF compression
types.
Checking and defining SHF_COMPRESSED fix the build error when compiling
with older toolchains. Also, the tool resolve_btfids is compiled with host
toolchain. The host toolchain is more likely to be older than the cross
compile toolchain.
Fixes: 51f6463aac ("tools/resolve_btfids: Fix sections with wrong alignment")
Signed-off-by: Kun-Chuan Hsieh <jetswayss@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/bpf/20210224052752.5284-1-jetswayss@gmail.com
- Support instruction latency in 'perf report', with both memory latency
(weight) and instruction latency information, users can locate expensive load
instructions and understand time spent in different stages.
- Extend 'perf c2c' to display the number of loads which were blocked by data
or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as Intel's
Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while providing a way to control
the enablement of events without restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like for other
targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C#
The example above counts 'cycles' and 'ref-cycles' of BPF program of id 254.
It is similar to bpftool-prog-profile command, but more flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO build-id using infrastructure
generalised from the eBPF subsystem, removing the need for traversing the perf.data file
to collect build-ids at the end of 'perf record' sessions and helping with long running
sessions where binaries can get replaced in updates, leading to possible mis-resolution
of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing threads (mmaps, comm, etc),
speeding up the work done at the start of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test' entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop, 'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYDANTQAKCRCyPKLppCJ+
J4veAQCISY1BPHscUTRYhq9cwU/Zs0ImtX7zDT4jxaP39JkduAD/eSqYavAJrtQh
HDyEiTgZ7CQSp5eCbXkzrnet4n3G9QE=
=H/Jk
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Support instruction latency in 'perf report', with both memory
latency (weight) and instruction latency information, users can
locate expensive load instructions and understand time spent in
different stages.
- Extend 'perf c2c' to display the number of loads which were blocked
by data or address conflict.
- Add 'perf stat' support for L2 topdown events in systems such as
Intel's Sapphire rapids server.
- Add support for PERF_SAMPLE_CODE_PAGE_SIZE in various tools, as a
sort key, for instance:
perf report --stdio --sort=comm,symbol,code_page_size
- New 'perf daemon' command to run long running sessions while
providing a way to control the enablement of events without
restarting a traditional 'perf record' session.
- Enable counting events for BPF programs in 'perf stat' just like
for other targets (tid, cgroup, cpu, etc), e.g.:
# perf stat -e ref-cycles,cycles -b 254 -I 1000
1.487903822 115,200 ref-cycles
1.487903822 86,012 cycles
2.489147029 80,560 ref-cycles
2.489147029 73,784 cycles
^C
The example above counts 'cycles' and 'ref-cycles' of BPF program
of id 254. It is similar to bpftool-prog-profile command, but more
flexible.
- Support the new layout for PERF_RECORD_MMAP2 to carry the DSO
build-id using infrastructure generalised from the eBPF subsystem,
removing the need for traversing the perf.data file to collect
build-ids at the end of 'perf record' sessions and helping with
long running sessions where binaries can get replaced in updates,
leading to possible mis-resolution of symbols.
- Support filtering by hex address in 'perf script'.
- Support DSO filter in 'perf script', like in other perf tools.
- Add namespaces support to 'perf inject'
- Add support for SDT (Dtrace Style Markers) events on ARM64.
perf record:
- Fix handling of eventfd() when draining a buffer in 'perf record'.
- Improvements to the generation of metadata events for pre-existing
threads (mmaps, comm, etc), speeding up the work done at the start
of system wide or per CPU 'perf record' sessions.
Hardware tracing:
- Initial support for tracing KVM with Intel PT.
- Intel PT fixes for IPC
- Support Intel PT PSB (synchronization packets) events.
- Automatically group aux-output events to overcome --filter syntax.
- Enable PERF_SAMPLE_DATA_SRC on ARMs SPE.
- Update ARM's CoreSight hardware tracing OpenCSD library to v1.0.0.
perf annotate TUI:
- Fix handling of 'k' ("show line number") hotkey
- Fix jump parsing for C++ code.
perf probe:
- Add protection to avoid endless loop.
cgroups:
- Avoid reading cgroup mountpoint multiple times, caching it.
- Fix handling of cgroup v1/v2 in mixed hierarchy.
Symbol resolving:
- Add OCaml symbol demangling.
- Further fixes for handling PE executables when using perf with Wine
and .exe/.dll files.
- Fix 'perf unwind' DSO handling.
- Resolve symbols against debug file first, to deal with artifacts
related to LTO.
- Fix gap between kernel end and module start on powerpc.
Reporting tools:
- The DSO filter shouldn't show samples in unresolved maps.
- Improve debuginfod support in various tools.
build ids:
- Fix 16-byte build ids in 'perf buildid-cache', add a 'perf test'
entry for that case.
perf test:
- Support for PERF_SAMPLE_WEIGHT_STRUCT.
- Add test case for PERF_SAMPLE_CODE_PAGE_SIZE.
- Shell based tests for 'perf daemon's commands ('start', 'stop,
'reconfig', 'list', etc).
- ARM cs-etm 'perf test' fixes.
- Add parse-metric memory bandwidth testcase.
Compiler related:
- Fix 'perf probe' kretprobe issue caused by gcc 11 bug when used
with -fpatchable-function-entry.
- Fix ARM64 build with gcc 11's -Wformat-overflow.
- Fix unaligned access in sample parsing test.
- Fix printf conversion specifier for IP addresses on arm64, s390 and
powerpc.
Arch specific:
- Support exposing Performance Monitor Counter SPRs as part of
extended regs on powerpc.
- Add JSON 'perf stat' metrics for ARM64's imx8mp, imx8mq and imx8mn
DDR, fix imx8mm ones.
- Fix common and uarch events for ARM64's A76 and Ampere eMag"
* tag 'perf-tools-for-v5.12-2020-02-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (148 commits)
perf buildid-cache: Don't skip 16-byte build-ids
perf buildid-cache: Add test for 16-byte build-id
perf symbol: Remove redundant libbfd checks
perf test: Output the sub testing result in cs-etm
perf test: Suppress logs in cs-etm testing
perf tools: Fix arm64 build error with gcc-11
perf intel-pt: Add documentation for tracing virtual machines
perf intel-pt: Split VM-Entry and VM-Exit branches
perf intel-pt: Adjust sample flags for VM-Exit
perf intel-pt: Allow for a guest kernel address filter
perf intel-pt: Support decoding of guest kernel
perf machine: Factor out machine__idle_thread()
perf machine: Factor out machines__find_guest()
perf intel-pt: Amend decoder to track the NR flag
perf intel-pt: Retain the last PIP packet payload as is
perf intel_pt: Add vmlaunch and vmresume as branches
perf script: Add branch types for VM-Entry and VM-Exit
perf auxtrace: Automatically group aux-output events
perf test: Fix unaligned access in sample parsing test
perf tools: Support arch specific PERF_SAMPLE_WEIGHT_STRUCT processing
...
This is what I see after compiling the kernel:
# bpf-next...bpf-next/master
?? tools/bpf/resolve_btfids/libbpf/
Fixes: fc6b48f692 ("tools/resolve_btfids: Build libbpf and libsubcmd in separate directories")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210212010053.668700-1-sdf@google.com
Add per-program counter for number of times recursion prevention mechanism
was triggered and expose it via show_fdinfo and bpf_prog_info.
Teach bpftool to print it.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210210033634.62081-7-alexei.starovoitov@gmail.com
We want this clean to be called from tree's root Makefile,
which defines same srctree variable and that will screw
the make setup.
We actually do not use srctree being passed from outside,
so we can solve this by setting current srctree value
directly.
Also changing the way how srctree is initialized as suggested
by Andrri.
Also root Makefile does not define the implicit RM variable,
so adding RM initialization.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-4-jolsa@kernel.org
We want this clean to be called from tree's root clean
and that one is silent if there's nothing to clean.
Adding check for all object to clean and display CLEAN
messages only if there are objects to remove.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-3-jolsa@kernel.org
Setting up separate build directories for libbpf and libpsubcmd,
so it's separated from other objects and we don't get them mixed
in the future.
It also simplifies cleaning, which is now simple rm -rf.
Also there's no need for FEATURE-DUMP.libbpf and bpf_helper_defs.h
files in .gitignore anymore.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210205124020.683286-2-jolsa@kernel.org
When dealing with BPF/BTF/pahole and DWARF v5 I wanted to build bpftool.
While looking into the source code I found duplicate assignments in misc tools
for the LLVM eco system, e.g. clang and llvm-objcopy.
Move the Clang, LLC and/or LLVM utils definitions to tools/scripts/Makefile.include
file and add missing includes where needed. Honestly, I was inspired by the commit
c8a950d0d3 ("tools: Factor HOSTCC, HOSTLD, HOSTAR definitions").
I tested with bpftool and perf on Debian/testing AMD64 and LLVM/Clang v11.1.0-rc1.
Build instructions:
[ make and make-options ]
MAKE="make V=1"
MAKE_OPTS="HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld CC=clang LD=ld.lld LLVM=1 LLVM_IAS=1"
MAKE_OPTS="$MAKE_OPTS PAHOLE=/opt/pahole/bin/pahole"
[ clean-up ]
$MAKE $MAKE_OPTS -C tools/ clean
[ bpftool ]
$MAKE $MAKE_OPTS -C tools/bpf/bpftool/
[ perf ]
PYTHON=python3 $MAKE $MAKE_OPTS -C tools/perf/
I was careful with respecting the user's wish to override custom compiler, linker,
GNU/binutils and/or LLVM utils settings.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com> # tools/build and tools/perf
Link: https://lore.kernel.org/bpf/20210128015117.20515-1-sedat.dilek@gmail.com
This target is used to only build the bootstrap bpftool, which will be
used to generate bpf skeletons for other tools, like perf.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20201228174054.907740-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No additional warnings are generated by enabling this, but having it
enabled will help avoid regressions.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210113223609.3358812-2-irogers@google.com
For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:
CC net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
IFF_UP = 1<<0, /* sysfs */
^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
IFF_UP = 0x1, /* Interface is up. */
The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.
Dropping #include <linux/if.h> resolves the issue and it is
not needed for compilation anyhow.
[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/
Fixes: f6f3bac08f ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
The kernel image can contain multiple types (structs/unions)
with the same name. This causes distinct type hierarchies in
BTF data and makes resolve_btfids fail with error like:
BTFIDS vmlinux
FAILED unresolved symbol udp6_sock
as reported by Qais Yousef [1].
This change adds warning when multiple types of the same name
are detected:
BTFIDS vmlinux
WARN: multiple IDs found for 'file': 526, 113351 - using 526
WARN: multiple IDs found for 'sk_buff': 2744, 113958 - using 2744
We keep the lower ID for the given type instance and let the
build continue.
Also changing the 'nr' variable name to 'nr_types' to avoid confusion.
[1] https://lore.kernel.org/lkml/20201229151352.6hzmjvu3qh6p2qgg@e107158-lin/
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210105234219.970039-1-jolsa@kernel.org
Wei Li
SanjayKumar Jeyakumar
Gu Shengxian
Jakub Kicinski
Tony Ambardar
David S. Miller
Zhihao Cheng
Jean-Philippe Brucker
Andrii Nakryiko
Liu Jian
Alexei Starovoitov
Yonghong Song
Cong Wang
Stanislav Fomichev
Jiapeng Chong
Joe Stringer
Ilya Leoshkevich
Ian Denhardt
Song Liu
Grant Seltzer
Kun-Chuan Hsieh
Linus Torvalds
Jiri Olsa
Sedat Dilek
Arnaldo Carvalho de Melo
Ian Rogers
Alan Maguire