- Misc code cleanups. Thanks to Colin, Xu and Rikard
- Features for the ASPEED FSI master
* Detect connection type and routing for Tacoma
* Run at full speed (200MHz) by default
* Set bus speed with a parameter
* CFAM reset GPIO
* 23 bit addressing
- Core features
* Disable unused links
* Set LBUS ownership
-----BEGIN PGP SIGNATURE-----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=pl/5
-----END PGP SIGNATURE-----
Merge tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi into char-misc-next
Joel writes:
FSI changes for 5.10
- Misc code cleanups. Thanks to Colin, Xu and Rikard
- Features for the ASPEED FSI master
* Detect connection type and routing for Tacoma
* Run at full speed (200MHz) by default
* Set bus speed with a parameter
* CFAM reset GPIO
* 23 bit addressing
- Core features
* Disable unused links
* Set LBUS ownership
* tag 'fsi-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/fsi:
fsi: aspeed: Support CFAM reset GPIO
fsi: aspeed: Add module param for bus divisor
fsi: aspeed: Run the bus at maximum speed
fsi: aspeed: Support cabled FSI
dt-bindings: fsi: Document gpios
fsi: scom: Constify scom_ids
fsi: sbefifo: Constify sbefifo_ids
fsi: master: Constify hub_master_ids
fsi: master: Remove link enable read-back
fsi: core: Set slave local bus ownership during init
fsi: core: Disable link when slave init fails
fsi: master: Add boolean parameter to link_enable function
fsi: fsi-occ: fix return value check in occ_probe()
fsi: aspeed: Enable 23-bit addressing
fsi: master-ast-cf: fix spelling mistake "firwmare" -> "firmware"
A new bus type "dfl" is introduced for private features which are not
initialized by DFL feature drivers (dfl-fme & dfl-afu drivers). So these
private features could be handled by separate driver modules.
DFL feature drivers (dfl-fme, dfl-port) will create DFL devices on
enumeration. DFL drivers could be registered on this bus to match these
DFL devices. They are matched by dfl type & feature_id.
[mdf@kernel.org: Add missing Documentation part to MAINTAINERS file]
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Systems have a line for restting the remote CFAM. This is not part of
the FSI master, but is associated with it, so it makes sense to include
it in the master driver.
This exposes a sysfs interface to reset the cfam, abstracting away the
direction and polarity of the GPIO, as well as the timing of the reset
pulse. Userspace will be blocked until the reset pulse is finished.
The reset is hard coded to be in the range of (900, 1000) us. It was
observed with a scope to regularly be just over 1ms.
If the device tree property is not preset the driver will silently
continue.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20200728025527.174503-6-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
The driver for the as73211 light sensor provides the following not yet
documented sysfs entries:
- in_intensity_(x|y|z)_raw
- in_intensity_(x|y|z)_scale
- in_intensity_sampling_frequency(_available)
- in_intensity_hardwaregain(_available)
- in_intensity_integration_time
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This fixes some typos found while browsing the documentation.
Cc: trivial@kernel.org
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add driver support for HDC2010/2080 series devices and sysfs
documentation for their heater element.
HDC2010 is an integrated high-accuracy humidity and temperature sensor
with very low power consumption. The device includes a resistive heating
element. The temperature range is -40C to 125C with 0.2C
accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy.
Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Export admin command status to sysfs attribute in order to allow user to
retrieve configuration error. Allows user tooling to retrieve the command
error and provide more user friendly error messages.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865278770.29455.8026892329182750127.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_batch_size to wq in order to allow the max batch
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865273617.29141.4383066301730821749.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add sysfs attribute max_xfer_size to wq in order to allow the max xfer
size configured on a per wq basis. Add support code to configure
the valid user input on wq enable. This is a performance tuning
parameter.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/159865265404.29141.3049399618578194052.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9ML+IeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGA8EIAIy/kTbFS0yrE9yV
hb98oX0z9+EU9YQg9vhaRWwPd+rJF/JMQZLqYcwbhjG9abaUL3T3fEcSAefMHw8E
LAt+hYzA38dHt7tqhsFQX3vV1VorvDVICBVN0yRPRWKKikq4OPIHzaAR9tleGAF5
8btQisl1PjN+obwYmLuNb6aX16OCwAF+uXOwehcoJs9dvMNhwtXRzfOflWzOvOo6
tE0bHErlylLDfLv4ZzEfczTdks4QJZ7C0xLSf3oN9AAynW42Xnhct4hi8qZY/hCf
CMaqeN4hdpub6TvQIqBdDqMMjEXGFgeNSnAEBQY9VpvUqz8NTu6sQxwgJEKDF5tg
d81lv2c=
=uW/F
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc3' into rdma.git for-next
Required due to dependencies in following patches.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Currently, power_supply framework supports only Battery, UPS,
Mains and USB power_supply_type. Add wireless power_supply_type
so that the drivers which supports wireless can register a power
supply class device with POWER_SUPPLY_TYPE_WIRELESS.
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add modifier IIO_MOD_O2 for O2 concentration reporting
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7
device to show cpumask") added cpumask file as part of hv-24x7 driver
inside the interface folder. The cpumask file is supposed to be in the
top folder of the PMU driver in order to make hotplug work.
This patch fixes that issue and creates new group 'cpumask_attr_group'
to add cpumask file and make sure it added in top folder.
command:# cat /sys/devices/hv_24x7/cpumask
0
Fixes: 792f73f747 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
Vtag support is on a client basis, meaning not every client
supports it. The vtag capability is communicated via the client properties
structure during client enumeration process.
Export the propertiy via sysfs.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
the relevant capability
- Misc libnvdimm and DAX cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
=Q6qn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
In this round, we've added two small interfaces, 1) GC_URGENT_LOW mode for
performance, and 2) F2FS_IOC_SEC_TRIM_FILE ioctl for security. The new GC
mode allows Android to run some lower priority GCs in background, while new
ioctl discards user information without race condition when the account is
removed. In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge race
conditions.
Enhancement:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fix:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code blocks for
better readability and debugging information.
-----BEGIN PGP SIGNATURE-----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=PjaF
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two small interfaces: (a) GC_URGENT_LOW
mode for performance and (b) F2FS_IOC_SEC_TRIM_FILE ioctl for
security.
The new GC mode allows Android to run some lower priority GCs in
background, while new ioctl discards user information without race
condition when the account is removed.
In addition, some patches were merged to address latency-related
issues. We've fixed some compression-related bug fixes as well as edge
race conditions.
Enhancements:
- add GC_URGENT_LOW mode in gc_urgent
- introduce F2FS_IOC_SEC_TRIM_FILE ioctl
- bypass racy readahead to improve read latencies
- shrink node_write lock coverage to avoid long latency
Bug fixes:
- fix missing compression flag control, i_size, and mount option
- fix deadlock between quota writes and checkpoint
- remove inode eviction path in synchronous path to avoid deadlock
- fix to wait GCed compressed page writeback
- fix a kernel panic in f2fs_is_compressed_page
- check page dirty status before writeback
- wait page writeback before update in node page write flow
- fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
We've added some minor sanity checks and refactored trivial code
blocks for better readability and debugging information"
* tag 'f2fs-for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
f2fs: prepare a waiter before entering io_schedule
f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
f2fs: replace test_and_set/clear_bit() with set/clear_bit()
f2fs: make file immutable even if releasing zero compression block
f2fs: compress: disable compression mount option if compression is off
f2fs: compress: add sanity check during compressed cluster read
f2fs: use macro instead of f2fs verity version
f2fs: fix deadlock between quota writes and checkpoint
f2fs: correct comment of f2fs_exist_written_data
f2fs: compress: delay temp page allocation
f2fs: compress: fix to update isize when overwriting compressed file
f2fs: space related cleanup
f2fs: fix use-after-free issue
f2fs: Change the type of f2fs_flush_inline_data() to void
f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
f2fs: should avoid inode eviction in synchronous path
f2fs: segment.h: delete a duplicated word
f2fs: compress: fix to avoid memory leak on cc->cpages
f2fs: use generic names for generic ioctls
f2fs: don't keep meta inode pages used for compressed block migration
...
Pull input updates from Dmitry Torokhov:
- an update to Elan touchpad controller driver supporting newer ICs
with enhanced precision reports and a new firmware update process
- an update to EXC3000 touch controller supporting additional parts
- assorted driver fixups
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
Input: exc3000 - add support to query model and fw_version
Input: exc3000 - add reset gpio support
Input: exc3000 - add EXC80H60 and EXC80H84 support
dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema
Input: sentelic - fix error return when fsp_reg_write fails
Input: alps - remove redundant assignment to variable ret
Input: ims-pcu - return error code rather than -ENOMEM
Input: elan_i2c - add ic type 0x15
Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary
Input: uinput - fix typo in function name documentation
Input: ati_remote2 - add missing newlines when printing module parameters
Input: psmouse - add a newline when printing 'proto' by sysfs
Input: synaptics-rmi4 - drop a duplicated word
Input: elan_i2c - add support for high resolution reports
Input: elan_i2c - do not constantly re-query pattern ID
Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14
Input: elan_i2c - handle firmware updated on newer ICs
Input: elan_i2c - add support for different firmware page sizes
Input: elan_i2c - fix detecting IAP version on older controllers
Input: elan_i2c - handle devices with patterns above 1
...
Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Others:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers
-----BEGIN PGP SIGNATURE-----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=OfZv
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on Power9
or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be unsupported on
Power10 and future processors, leaving us with no way to implement the
functionality it requests. This risks breaking userspace, though we believe
it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion checking.
We now allow stack expansion up to the rlimit, like other architectures.
- Remove the remnants of our (previously disabled) topology update code, which
tried to react to NUMA layout changes on virtualised systems, but was prone
to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link stack
(branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as usual.
Thanks to:
Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey Kardashevskiy,
Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan S, Bharata B Rao, Bill
Wendling, Bin Meng, Cédric Le Goater, Chris Packham, Christophe Leroy,
Christoph Hellwig, Daniel Axtens, Dan Williams, David Lamparter, Desnes A.
Nunes do Rosario, Erhard F., Finn Thain, Frederic Barrat, Ganesh Goudar,
Gautham R. Shenoy, Geoff Levand, Greg Kurz, Gustavo A. R. Silva, Hari Bathini,
Harish, Imre Kaloz, Joel Stanley, Joe Perches, John Crispin, Jordan Niethe,
Kajol Jain, Kamalesh Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li
RongQing, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal
Suchanek, Milton Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver
O'Halloran, Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe
Bergheaud, Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar Dronamraju,
Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thiago Jung
Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov, Wei Yongjun, Wen Xiong,
YueHaibing.
-----BEGIN PGP SIGNATURE-----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=QMY1
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add support for (optionally) using queued spinlocks & rwlocks.
- Support for a new faster system call ABI using the scv instruction on
Power9 or later.
- Drop support for the PROT_SAO mmap/mprotect flag as it will be
unsupported on Power10 and future processors, leaving us with no way
to implement the functionality it requests. This risks breaking
userspace, though we believe it is unused in practice.
- A bug fix for, and then the removal of, our custom stack expansion
checking. We now allow stack expansion up to the rlimit, like other
architectures.
- Remove the remnants of our (previously disabled) topology update
code, which tried to react to NUMA layout changes on virtualised
systems, but was prone to crashes and other problems.
- Add PMU support for Power10 CPUs.
- A change to our signal trampoline so that we don't unbalance the link
stack (branch return predictor) in the signal delivery path.
- Lots of other cleanups, refactorings, smaller features and so on as
usual.
Thanks to: Abhishek Goel, Alastair D'Silva, Alexander A. Klimov, Alexey
Kardashevskiy, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju
T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Balamuruhan
S, Bharata B Rao, Bill Wendling, Bin Meng, Cédric Le Goater, Chris
Packham, Christophe Leroy, Christoph Hellwig, Daniel Axtens, Dan
Williams, David Lamparter, Desnes A. Nunes do Rosario, Erhard F., Finn
Thain, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geoff Levand,
Greg Kurz, Gustavo A. R. Silva, Hari Bathini, Harish, Imre Kaloz, Joel
Stanley, Joe Perches, John Crispin, Jordan Niethe, Kajol Jain, Kamalesh
Babulal, Kees Cook, Laurent Dufour, Leonardo Bras, Li RongQing, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Michal Suchanek, Milton
Miller, Mimi Zohar, Murilo Opsfelder Araujo, Nathan Chancellor, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Piggin, Oliver O'Halloran,
Palmer Dabbelt, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud,
Pingfan Liu, Pratik Rajesh Sampat, Qian Cai, Qinglang Miao, Randy
Dunlap, Ravi Bangoria, Sachin Sant, Sam Bobroff, Sandipan Das, Santosh
Sivaraj, Satheesh Rajendran, Shirisha Ganta, Sourabh Jain, Srikar
Dronamraju, Stan Johnson, Stephen Rothwell, Thadeu Lima de Souza
Cascardo, Thiago Jung Bauermann, Tom Lane, Vaibhav Jain, Vladis Dronov,
Wei Yongjun, Wen Xiong, YueHaibing.
* tag 'powerpc-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (337 commits)
selftests/powerpc: Fix pkey syscall redefinitions
powerpc: Fix circular dependency between percpu.h and mmu.h
powerpc/powernv/sriov: Fix use of uninitialised variable
selftests/powerpc: Skip vmx/vsx/tar/etc tests on older CPUs
powerpc/40x: Fix assembler warning about r0
powerpc/papr_scm: Add support for fetching nvdimm 'fuel-gauge' metric
powerpc/papr_scm: Fetch nvdimm performance stats from PHYP
cpuidle: pseries: Fixup exit latency for CEDE(0)
cpuidle: pseries: Add function to parse extended CEDE records
cpuidle: pseries: Set the latency-hint before entering CEDE
selftests/powerpc: Fix online CPU selection
powerpc/perf: Consolidate perf_callchain_user_[64|32]()
powerpc/pseries/hotplug-cpu: Remove double free in error path
powerpc/pseries/mobility: Add pr_debug() for device tree changes
powerpc/pseries/mobility: Set pr_fmt()
powerpc/cacheinfo: Warn if cache object chain becomes unordered
powerpc/cacheinfo: Improve diagnostics about malformed cache lists
powerpc/cacheinfo: Use name@unit instead of full DT path in debug messages
powerpc/cacheinfo: Set pr_fmt()
powerpc: fix function annotations to avoid section mismatch warnings with gcc-10
...
Expose model and fw_version via sysfs. Also query the model
in probe to make sure, that the I2C communication with the
device works before successfully probing the driver.
This is a bit complicated, since EETI devices do not have
a sync interface. Sending the commands and directly reading
does not work. Sending the command and waiting for some time
is also not an option, since there might be touch events in
the mean time.
Last but not least we do not cache the results, since this
interface can be used to check the I2C communication is still
working as expected.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This series consists of the usual driver updates (ufs, qla2xxx, tcmu,
lpfc, hpsa, zfcp, scsi_debug) and minor bug fixes. We also have a
huge docbook fix update like most other subsystems and no major update
to the core (the few non trivial updates are either minor fixes or
removing an unused feature [scsi_sdb_cache]).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXyxq1yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSoAAQChZ4i8
ZqYW3pL33JO3fA8vdjvLuyC489Hj4wzIsl3/bQEAxYyM6BSLvMoLWR2Plq/JmTLm
4W/LDptarpTiDI3NuDc=
=4b0W
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXyv2rA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngIgCfZOVj022X+paV81NwvO/TroMDA7oAn1C4XCmY
Fxz55oHIyk9lbQxsDhID
=ujqG
-----END PGP SIGNATURE-----
Merge tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of Staging and IIO driver patches for 5.9-rc1.
Lots of churn here, but overall the size increase in lines added is
small, while adding a load of new IIO drivers.
Major things in here:
- lots and lots of IIO new drivers and frameworks added
- IIO driver fixes and updates
- lots of tiny coding style cleanups for staging drivers
- vc04_services major reworks and cleanups
We had 3 set of drivers move out of staging in this round as well:
- wilc1000 wireless driver moved out of staging
- speakup moved out of staging
- most USB driver moved out of staging
Full details are in the shortlog.
All of these have been in linux-next with no reported issues. The last
few changes here were to resolve reported linux-next issues, and they
seem to have resolved the problems"
* tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits)
staging: most: fix up movement of USB driver
staging: rts5208: clear alignment style issues
staging: r8188eu: replace rtw_netdev_priv define with inline function
staging: netlogic: clear alignment style issues
staging: android: ashmem: Fix lockdep warning for write operation
drivers: most: add USB adapter driver
staging: most: Use %pM format specifier for MAC addresses
staging: ks7010: Use %pM format specifier for MAC addresses
staging: qlge: qlge_dbg: removed comment repition
staging: wfx: Use flex_array_size() helper in memcpy()
staging: rtl8723bs: Align macro definitions
staging: rtl8723bs: Clean up function declations
staging: rtl8723bs: Fix coding style errors
drivers: staging: audio: Fix the missing header file for helper file
staging: greybus: audio: Enable GB codec, audio module compilation.
staging: greybus: audio: Add helper APIs for dynamic audio modules
staging: greybus: audio: Resolve compilation error in topology parser
staging: greybus: audio: Resolve compilation errors for GB codec module
staging: greybus: audio: Maintain jack list within GB Audio module
staging: greybus: audio: Update snd_jack FW usage as per new APIs
...
Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCXyskqQAKCRAw5/Bqldv6
8ge0AJ9JRTa/0Xkl7JuKUpC93jAnvjpK+ACgsDijb77H5zmtwC8xa0kXiDsbh3E=
=aSJX
-----END PGP SIGNATURE-----
Merge tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Okay, so... this one is interesting. RGB LEDs are very common, and we
need to have some kind of support for them. Multicolor is for
arbitrary set of LEDs in one package, RGB is for LEDs that can produce
full range of colors. We do not have real multicolor LED that is not
RGB in the pipeline, so that one is disabled for now.
You can expect this saga to continue with next pull requests"
* tag 'leds-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (37 commits)
MAINTAINERS: Remove myself as LED subsystem maintainer
leds: disallow /sys/class/leds/*:multi:* for now
leds: add RGB color option, as that is different from multicolor.
Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:
Documentation: ABI: leds-turris-omnia: document sysfs attribute
leds: initial support for Turris Omnia LEDs
dt-bindings: leds: add cznic,turris-omnia-leds binding
leds: pattern trigger -- check pattern for validity
leds: Replace HTTP links with HTTPS ones
leds: trigger: add support for LED-private device triggers
leds: lp5521: Add multicolor framework multicolor brightness support
leds: lp5523: Update the lp5523 code to add multicolor brightness function
leds: lp55xx: Add multicolor framework support to lp55xx
leds: lp55xx: Convert LED class registration to devm_*
dt-bindings: leds: Convert leds-lp55xx to yaml
leds: multicolor: Introduce a multicolor class definition
leds: Add multicolor ID to the color ID list
dt: bindings: Add multicolor class dt bindings documention
leds: lp5523: Fix various formatting issues in the code
leds: lp55xx: Fix file permissions to use DEVICE_ATTR macros
...
Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXymciA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylVVwCfU7JxgjFhAJTzC9K5efVqsrSHzxQAnijHrqUn
pHgI9M1ZRVGwmv2RNWb3
=9/8I
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the large set of USB and Thunderbolt patches for 5.9-rc1.
Nothing really magic/major in here, just lots of little changes and
updates:
- clean up language usages in USB core and some drivers
- Thunderbolt driver updates and additions
- USB Gadget driver updates
- dwc3 driver updates (like always...)
- build with "W=1" warning fixups
- mtu3 driver updates
- usb-serial driver updates and device ids
- typec additions and updates for new hardware
- xhci debug code updates for future platforms
- cdns3 driver updates
- lots of other minor driver updates and fixes and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (330 commits)
usb: common: usb-conn-gpio: Register charger
usb: mtu3: simplify mtu3_req_complete()
usb: mtu3: clear dual mode of u3port when disable device
usb: mtu3: use MTU3_EP_WEDGE flag
usb: mtu3: remove useless member @busy in mtu3_ep struct
usb: mtu3: remove repeated error log
usb: mtu3: add ->udc_set_speed()
usb: mtu3: introduce a funtion to check maximum speed
usb: mtu3: clear interrupts status when disable interrupts
usb: mtu3: reinitialize CSR registers
usb: mtu3: fix macro for maximum number of packets
usb: mtu3: remove unnecessary pointer checks
usb: xhci: Fix ASMedia ASM1142 DMA addressing
usb: xhci: define IDs for various ASMedia host controllers
usb: musb: convert to devm_platform_ioremap_resource_byname
usb: gadget: tegra-xudc: convert to devm_platform_ioremap_resource_byname
usb: gadget: r8a66597: convert to devm_platform_ioremap_resource_byname
usb: dwc3: convert to devm_platform_ioremap_resource_byname
usb: cdns3: convert to devm_platform_ioremap_resource_byname
usb: phy: am335x: convert to devm_platform_ioremap_resource_byname
...
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAl8pk84ACgkQUqAMR0iA
lPIrTxAAhD6fosJx+7LCrDRABIw/ZybeS5MIxTuPsNtdMmGBemigew5Ao1wYY6Ww
3BFiNC2LpDXPxSOCQpz0Zm5/oCLhShPJmS6ukjLbufDsiw0MezliKCAa2Bfw3W31
6xntQtf7ps+bmTEQDyuznu8Kfg+I3lmdGUOEBBluHIP4gb7XKQE8ttyUHB6qdiXI
3eAl53Q8dOMMjtk5eNBXA19JY43g4JmLZRBumrAUc1vsv15KTDmSyWKlV8+tLH9K
JbQAHe0pNVec4sJUIYLvIwDZXvtsvxjdJyX3tTeZ7xJ/ARcvRLoixVGqWxKhqdth
j5U/L+YQfCJifyqvEVo03yy4Ti+OraliRpGcRf/bM2HpmFBA2+dISr7/VEqRwkG7
Sy8HuvBHHyUqdrPjB7izhv8iyRN+LxFfpdT5LMnzsvxMxAJ+QwNjxb13RA4kkeRU
5SgOhfGWgTsLy71J6qdSeXYB2oPFw4Onp5yAtoUsOJVYqWkN9x0zdl+9HmqIHF7T
dY+KNriEO6gmpsQrMR4FC/GVMtwYWf8AoqeZen5O5SQULmzuKQ5AkOo0IAMrU92i
iAdFrSZj35HAQjIJRccPNGZ3FwTd1Z4r5GT7VRvrN+nq2wVopzbbz924/lmsGoAS
YppAw31sKfXDc5uWE8jP8GP3OJqhORn2PPXq3D5Q3XSVbGgey0Q=
=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
* ASUS WMI driver honors BAT1 name of the battery
(quite a few new laptops are using it)
* Dell WMI driver supports new key codes and backlight events
* ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the user
* Intel Speed Select Technology gained support on Sapphire Rapids platform
* Regular update of Speed Select Technology tools
* Mellanox has been updated to support complex attributes
* PMC core driver has been fixed to show correct names for LPM0 register
* HTTP links were replaced by HTTPS ones where it applies
* Miscellaneous fixes and cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- Replace HTTP links with HTTPS ones
Add new intel_atomisp2_led driver:
- Add new intel_atomisp2_led driver
apple-gmux:
- Replace HTTP links with HTTPS ones
asus-nb-wmi:
- Drop duplicate DMI quirk structures
- add support for ASUS ROG Zephyrus G14 and G15
asus-wmi:
- allow BAT1 battery name
dell-wmi:
- add new dmi mapping for keycode 0xffff
- add new keymap type 0x0012
- add new backlight events
intel_cht_int33fe:
- Drop double check for ACPI companion device
intel-hid:
- Fix return value check in check_acpi_dev()
intel_pmc_core:
- fix bound check in pmc_core_mphy_pg_show()
- update TGL's LPM0 reg bit map name
intel-vbtn:
- Fix return value check in check_acpi_dev()
ISST:
- drop a duplicated word in isst_if.h
- Add new PCI device ids
pcengines-apuv2:
- revert wiring up simswitch GPIO as LED
platform/mellanox:
- Introduce string_upper() and string_lower() helpers
- Add string_upper() and string_lower() tests
- Extend FAN platform data description
- Add more definitions for system attributes
- Add new attribute for mlxreg-io sysfs interfaces
- Add presence register field for FAN devices
- Add support for complex attributes
- mlxreg-io: Add support for complex attributes
- mlxreg-hotplug: Add environmental data to uevent
- mlxreg-hotplug: Use capability register for attribute creation
- mlxreg-hotplug: Modify module license
system76-acpi:
- Fix brightness_set schedule while atomic
thinkpad_acpi:
- Make some symbols static
- add documentation for battery charge control
- use standard charge control attribute names
- remove unused defines
- Replace HTTP links with HTTPS ones
- not loading brightness_init when _BCL invalid
- lap or desk mode interface
- Revert "Use strndup_user() in dispatch_proc_write()"
tools/power/x86/intel-speed-select:
- Update version for v5.9
- Add retries for mail box commands
- Add option to delay mbox commands
- Ignore -o option processing on error
- Change path for caching topology info
-----BEGIN PGP SIGNATURE-----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=yvnW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
Update papr_scm.c to query dimm performance statistics from PHYP via
H_SCM_PERFORMANCE_STATS hcall and export them to user-space as PAPR
specific NVDIMM attribute 'perf_stats' in sysfs. The patch also
provide a sysfs ABI documentation for the stats being reported and
their meanings.
During NVDIMM probe time in papr_scm_nvdimm_init() a special variant
of H_SCM_PERFORMANCE_STATS hcall is issued to check if collection of
performance statistics is supported or not. If successful then a PHYP
returns a maximum possible buffer length needed to read all
performance stats. This returned value is stored in a per-nvdimm
attribute 'stat_buffer_len'.
The layout of request buffer for reading NVDIMM performance stats from
PHYP is defined in 'struct papr_scm_perf_stats' and 'struct
papr_scm_perf_stat'. These structs are used in newly introduced
drc_pmem_query_stats() that issues the H_SCM_PERFORMANCE_STATS hcall.
The sysfs access function perf_stats_show() uses value
'stat_buffer_len' to allocate a buffer large enough to hold all
possible NVDIMM performance stats and passes it to
drc_pmem_query_stats() to populate. Finally statistics reported in the
buffer are formatted into the sysfs access function output buffer.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200731064153.182203-2-vaibhav@linux.ibm.com
This is a long life mode set in the factory for extended warranty
battery, the power charging rate is customized so that battery at
work last longer.
Presently switching to a different battery charging mode is through
EC PID 0x0710 to configure the battery firmware, this operation will
be blocked by EC with failure code 0x01 when PLL mode is already
in use.
Signed-off-by: Crag Wang <crag.wang@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Until now, the devfreq driver using polling mode like simple_ondemand
governor have used only deferrable timer for reducing the redundant
power consumption. It reduces the CPU wake-up from idle due to polling mode
which check the status of Non-CPU device.
But, it has a problem for Non-CPU device like DMC device with DMA operation.
Some Non-CPU device need to do monitor continuously regardless of CPU state
in order to decide the proper next status of Non-CPU device.
So, add support the delayed timer for polling mode to support
the repetitive monitoring. The devfreq driver and user can select
the kind of timer on either deferrable and delayed timer.
For example, change the timer type of DMC device
based on Exynos5422-based Odroid-XU3 as following:
- If want to use deferrable timer as following:
echo deferrable > /sys/class/devfreq/10c20000.memory-controller/timer
- If want to use delayed timer as following:
echo delayed > /sys/class/devfreq/10c20000.memory-controller/timer
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Some of the mei device heads are not generic and have
a specific purpose, we need to announce it to the user space
so it is possible to detect the correct device node via
matching attributes.
Generic heads are marked as 'mei' while special purpose heads
have their own names. Currently we are adding 'itouch' string
for Intel IPTS 1.0, 2.0 devices.
This is done via new sysfs attribute 'kind'.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200728192242.3117779-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation, and register bus level operations to report the dynamic
platform-quiesce time relative to the number of dimms armed for firmware
activation.
A new nfit-specific bus attribute "firmware_activate_noidle" is added to
allow the activation to switch between platform enforced, and OS
opportunistic device quiesce. In other words, let the hibernate cycle
handle in-flight device-dma rather than the platform attempting to
increase PCI-E timeouts and the like.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
and ->capability() indicates the system state expectations for activate.
At the DIMM level ->activate_state() indicates the per-DIMM state,
->activate_result() indicates the outcome of the last activation
attempt, and ->arm() attempts to transition the DIMM from 'idle' to
'armed'.
A new hibernate_quiet_exec() facility is added to support firmware
activation in an OS defined system quiesce state. It leverages the fact
that the hibernate-freeze state wants to assert that a memory
hibernation snapshot can be taken. This is in contrast to a platform
firmware defined quiesce state that may forcefully quiet the memory
controller independent of whether an individual device-driver properly
supports hibernate-freeze.
The libnvdimm sysfs interface is extended to support detection of a
firmware activate capability. The mechanism supports enumeration and
triggering of firmware activate, optionally in the
hibernate_quiet_exec() context.
[rafael: hibernate_quiet_exec() proposal]
[vishal: fix up sparse warning, grammar in Documentation/]
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into staging-next
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8d8h4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGd0sH/2iktYhMwPxzzpnb
eI3OuTX/mRn4vUFOfpx9dmGVleMfKkpbvnn3IY7wA62Qfv7J7lkFRa1Bd1DlqXfW
yyGTGDSKG5chiRCOU3s9ni92M4xIzFlrojyt/dIK2lUGMzUPI9FGlZRGQLKqqwLh
2syOXRWbcQ7e52IHtDSy3YBNveKRsP4NyqV+GxGiex18SMB/M3Pw9EMH614eDPsE
QAGQi5uGv4hPJtFHgXgUyBPLFHIyFAiVxhFRIj7u2DSEKY79+wO1CGWFiFvdTY4B
CbqKXLffY3iQdFsLJkj9Dl8cnOQnoY44V0EBzhhORxeOp71StUVaRwQMFa5tp48G
171s5Hs=
=BQIl
-----END PGP SIGNATURE-----
Merge 5.8-rc7 into usb-next
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devlink device name is of the form "supplier:consumer". But ":" is
fairly common in device names and makes it visually hard to distinguish
supplier and consumer. So, replace it with "--" to make it easier.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200724180523.1393383-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For firmware on the Turris MOX (Armada 3720 based board), add support
ECDSA signatures via debugfs.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqgnwAKCRALBhiOFHI7
1aROAJ9xw1KBR6g4InE5NvO3yHy29L12SgCeM0klcfvENUGuhW8pntmqY5c3Zu8=
=4riI
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/drivers
mvebu drivers for 5.9 (part 1)
For firmware on the Turris MOX (Armada 3720 based board), add support
ECDSA signatures via debugfs.
* tag 'mvebu-drivers-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
firmware: turris-mox-rwtm: add debugfs documentation
firmware: turris-mox-rwtm: support ECDSA signatures via debugfs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Document the global brightness attribute for the Turris Omnia LED
controller.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Introduce a multicolor class that groups colored LEDs
within a LED node.
The multicolor class groups monochrome LEDs and allows controlling two
aspects of the final combined color: hue and lightness. The former is
controlled via the intensity file and the latter is controlled
via brightness file.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[squashed leds: multicolor: Fix camel case in documentation in]
Add HEALTH_WARM, HEALTH_COOL and HEALTH_HOT to the health enum.
HEALTH_WARM, HEALTH_COOL, and HEALTH_HOT properties are taken
from JEITA specification JISC8712:2015
Acked-by: Andrew F. Davis <afd@ti.com>
Tested-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
-----BEGIN PGP SIGNATURE-----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=FHld
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.9 merge window
This includes following Thunderbolt/USB4 changes for v5.9 merge window:
* Improvements around NHI (Native Host Interface) HopID allocation
* Improvements to tunneling and USB3 bandwidth management support
* Add KUnit tests for path walking and tunneling
* Initial support for USB4 retimer firmware upgrade
* Implement Thunderbolt device firmware upgrade mechanism that runs
the NVM image authentication when the device is disconnected.
* A couple of small non-critical fixes
* tag 'thunderbolt-for-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (32 commits)
thunderbolt: Fix old style declaration warning
thunderbolt: Add support for authenticate on disconnect
thunderbolt: Add support for separating the flush to SPI and authenticate
thunderbolt: Ensure left shift of 512 does not overflow a 32 bit int
thunderbolt: Add support for on-board retimers
thunderbolt: Implement USB4 port sideband operations for retimer access
thunderbolt: Retry USB4 block read operation
thunderbolt: Generalize usb4_switch_do_[read|write]_data()
thunderbolt: Split common NVM functionality into a separate file
thunderbolt: Add Intel USB-IF ID to the NVM upgrade supported list
thunderbolt: Add KUnit tests for tunneling
thunderbolt: Add USB3 bandwidth management
thunderbolt: Make tb_port_get_link_speed() available to other files
thunderbolt: Implement USB3 bandwidth negotiation routines
thunderbolt: Increase DP DPRX wait timeout
thunderbolt: Report consumed bandwidth in both directions
thunderbolt: Make usb4_switch_map_pcie_down() also return enabled ports
thunderbolt: Make usb4_switch_map_usb3_down() also return enabled ports
thunderbolt: Do not tunnel USB3 if link is not USB4
thunderbolt: Add DP IN resources for all routers
...
Add debugfs ABI documentation for the ECDSA signatures.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
-----BEGIN PGP SIGNATURE-----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=LyRl
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, cleanups and features for IIO in the 5.9 cycle
Some new devices, but particularly good this time is the core rework coming
from Alexandru. Some of this has been in Analog's tree a long time, but other
parts are motivated by closing down common mistakes in new drivers.
Changes since first try at this pull request:
* Add missed patch to actually remove iio_priv_to_dev and as a result
also drop a few ingenic patches that need to be updated to take this
into account.
* Fix an ordering issue int he pollfunc attach in the core rework.
New device support
* qcom pmic7 adc
- New driver using common qcom-vadc library. Some associated cleanups and
refactors.
* invensense icm42600
- New driver supporting icm42600, icm42602, icm42605 and icm42622 via i2c
or spi. These are all 6 axis IMUs with gyro and accelerometers.
Driver supports buffered modes using the hardware fifo and interpolation
for accurate timestamps.
* sensirion scd30
- New driver for this carbon dioxide sensor including i2c and serial
interfaces + bindings.
Features
* ak8975
- Add reset gpio support.
* bma400
- Support SPI.
* bmc150
- Document and add support for bmc156b and bmm150b, tidy up _magn endings.
* bmi160
- Regulator and mount matrix support.
* mxc4005
- Add ID for mxc6655
* rockchip-saradc
- Triggered buffer support.
DT bindings
* qcom spmi-vadc converted to yaml + pmic7 bindings
* ak8975 tidy up and convert to yaml + add reset-gpio binding
* ingenic-adc -convert to yaml.
Core rework all carried through by Alexandru Ardelean.
* Assign parent device in the core rather than every driver. A few devices
need to provide specific non standard parents, so there is support for
overriding.
* Start to take parts of struct iio_dev opaque to the drivers.
This will be a long term job, but should reduce the number of drivers
we get that use parts that are currently only 'internal' by documentation.
* Move attach and detach of pollfunc to the core. Every triggered buffer
using driver had to do the same thing, so lets do it in the core. The
hard part here was getting all the drivers into canonical form so there
would be no functional changes in this final patch. That's taken quite
a lot of work over last couple of cycles!
Cleanups and minor fixes.
* docs
- Improve IIO_CONCENTRATION channel type description in ABI docs.
- Drop doubled word cases.
- Http to Https conversion.
* core
- Make iio_device_get_drvdata take a const struct iio_dev * avoiding some
nasty casts.
* ADCs
- Drop lots of users of of_match_ptr macro, includes of mod_devicetable.h
and CONFIG_OF protections. These prevent use of ACPI PRP0001 with these
drivers and get coppied into lots of new drivers.
* ad5380
- Constify iio_chan_spec_ext_info
* ad5592r
- Constify iio_chan_spec_ext_info
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ad8366
- Make gpio optional as doesn't matter if its there or not.
* adis16480
- Use irq types instead of the flags.
* atlas-ezo-sensor
- Minimize scope of ret variable.
* at91-adc
- Add COMPILE_TEST dependency to driver to improve build coverage.
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* at91-sama5d2
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
- Drop Ludovic as a co-maintaienr.
* cros_ec
- Reapply the range after resume.
- Add a read only frequency entry for legacy version.
- Typo fixes
* hts221
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* inv_mpu
- Drop double check on ACPI companion device.
* iqs621
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* iqs624
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* max11100
- Constify iio_chan_spec
* mmc35240
- Constify reg_default
* rockchip-saradc
- Move to managed allocators for everything in probe.
- Use more distinctive prefix for channel macros.
* stk3310
- Constify regmap_config.
* stm32-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* stm32-dfsdm-adc
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* ti-am335x
- Use managed allocations where straight forward in probe function.
* tsl2563
- Avoid use of iio_priv_to_dev (precursor to taking parts of iio_dev opaque)
* tag 'iio-for-5.9a-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (107 commits)
iio: buffer: fix attach/detach pollfunc order
iio: core: remove iio_priv_to_dev() helper
Replace HTTP links with HTTPS ones: drivers/iio
Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.
iio: cros_ec_accel_legacy: Add Read Only frequency entries
MAINTAINERS: adc: at91-sama5d2_adc: remove myself as co-maintainer
iio: adc: ti_am335x_adc: alloc kfifo & IRQ via devm_ functions
iio: adc: ti_am335x_adc: alloc channels via devm_kcalloc()
iio:adc:ingenic: drop of_match_ptr protection and include mod_devicetable.h
iio:adc:ti-tlc4541: Drop CONFIG_OF and of_match_ptr protections.
iio:adc:ti-adc161s626: Drop of_match_ptr protection.
iio:adc:ti-adc084s021: drop of_match_ptr protection
iio:adc:ti-adc0832: drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop of_match_ptr and change to mod_devicetable.h
iio:adc:sd_adc_modulator: Drop of_match_ptr and tweak includes
iio:adc:mcp3422: remove CONFIG_OF and of_match_ptr protections
iio:adc:mcp320x: Drop CONFIG_OF and of_match_ptr protections
iio:adc:max1118: Drop CONFIG_OF / of_match_ptr protections
iio:adc:max11100: Drop of_match_ptr protection / add mod_devicetable.h include
...
Patch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
Primary use to expose the cpumask is for the perf tool which has the
capability to parse the driver sysfs folder and understand the
cpumask file. Having cpumask file will reduce the number of perf command
line parameters (will avoid "-C" option in the perf tool
command line). It can also notify the user which is
the current cpu used to retrieve the counter data.
command:# cat /sys/devices/hv_24x7/interface/cpumask
0
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200709051836.723765-3-kjain@linux.ibm.com
Add a new max_active zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max_active_zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_active_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
For SCSI devices, even though max active zones is not part of the ZBC/ZAC
spec, export max_active_zones as 0, signifying "no limit".
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new max_open_zones definition in the sysfs documentation.
This definition will be common for all devices utilizing the zoned block
device support in the kernel.
Export max open zones according to this new definition for NVMe Zoned
Namespace devices, ZAC ATA devices (which are treated as SCSI devices by
the kernel), and ZBC SCSI devices.
Add the new max_open_zones member to struct request_queue, rather
than as a queue limit, since this property cannot be split across stacking
drivers.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add documentation for the new attributes for exposing CPLDs part
numbers and CPLD minor versions.
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some opencapi FPGA images allow to control if the FPGA should be reloaded
on the next adapter reset. If it is supported, the image specifies it
through a Vendor Specific DVSEC in the config space of function 0.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
-----BEGIN PGP SIGNATURE-----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=PDtV
-----END PGP SIGNATURE-----
Merge tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
Enable multi-stage OP-TEE bus enumeration
Probes drivers on the OP-TEE bus in two steps. First for drivers which
do not depend on tee-supplicant. After tee-supplicant has been started
probe the devices which do depend on tee-supplicant.
Also introduces driver which uses an OP-TEE based fTPM Trusted
Application depends on tee-supplicant NV RAM implementation based on
RPMB secure storage.
* tag 'optee-bus-for-v5.9' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tpm_ftpm_tee: register driver on TEE bus
optee: enable support for multi-stage bus enumeration
optee: use uuid for sysfs driver entry
Link: https://lore.kernel.org/r/20200710085230.GA1312913@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The commit 625d344978 ("Revert "kernel/printk: add kmsg SEEK_CUR
handling"") reverted a change done to the return value in case a SEEK_CUR
operation was performed for kmsg buffer based on the fact that different
userspace apps were handling the new return value (-ESPIPE) in different
ways, breaking them.
At the same time -ESPIPE was the wrong decision because kmsg /does support/
seek() but doesn't follow the "normal" behavior userspace is used to.
Because of that and also considering the time -EINVAL has been used, it was
decided to keep this way to avoid more userspace breakage.
This patch adds an official statement to the kmsg documentation pointing to
the current return value for SEEK_CUR, -EINVAL, thus userspace libraries
and apps can refer to it for a definitive guide on what to expect.
Signed-off-by: Bruno Meneguele <bmeneg@redhat.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200710174423.10480-1-bmeneg@redhat.com
For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock gating debugfs interface to be bitmask instead of true/false.
Each bit represents a different engine, according to gaudi_engine_id enum.
See debugfs documentation for more details.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
This would be useful to check if a device is not probing because it's
waiting for a supplier to be added and then linked to before it can
probe.
To reduce sysfs clutter, this file is added only if it can ever be 1.
So, if fw_devlink is disabled or set to permissive, this file is not
added. Also, this file is removed once the device probes as it's no
longer relevant.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can be used to check if a device supports sync_state() callbacks
and therefore keeps resources left on by the bootloader enabled till all
its consumers have probed.
This can also be used to check if sync_state() has been called for a
device or whether it is still trying to keep resources enabled because
they were left enabled by the bootloader and all its consumers haven't
probed yet.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's helpful to be able to look at device link details from sysfs. So,
expose it in sysfs.
Say device-A is supplier of device-B. These are the additional files
this patch would create:
/sys/class/devlink/device-A:device-B/
auto_remove_on
consumer/ -> .../device-B/
runtime_pm
status
supplier/ -> .../device-A/
sync_state_only
/sys/devices/.../device-A/
consumer:device-B/ -> /sys/class/devlink/device-A:device-B/
/sys/devices/.../device-B/
supplier:device-A/ -> /sys/class/devlink/device-A:device-B/
That way:
To get a list of all the device link in the system:
ls /sys/class/devlink/
To get the consumer names and links of a device:
ls -d /sys/devices/.../device-X/consumer:*
To get the supplier names and links of a device:
ls -d /sys/devices/.../device-X/supplier:*
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platform devices like ARM SMMU are memory-mapped and populated by ACPI/IORT.
In this case, NUMA topology of those platform devices are exported by firmware as
well. Software might care about the numa_node of those devices in order to achieve
NUMA locality.
This patch will show the numa_node for this kind of devices in sysfs. For those
platform devices without numa, numa_node won't be visible.
Cc: Prime Zeng <prime.zeng@hisilicon.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20200619030045.81956-1-song.bao.hua@hisilicon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the evolving use-cases for TEE bus, now it's required to support
multi-stage enumeration process. But using a simple index doesn't
suffice this requirement and instead leads to duplicate sysfs entries.
So instead switch to use more informative device UUID for sysfs entry
like:
/sys/bus/tee/devices/optee-ta-<uuid>
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Added a new gc_urgent mode, GC_URGENT_LOW, in which mode
F2FS will lower the bar of checking idle in order to
process outstanding discard commands and GC a little bit
aggressively.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
-----BEGIN PGP SIGNATURE-----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=JTXs
-----END PGP SIGNATURE-----
Merge tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers
SoC attributes update for v5.9
1. Addition of ARM SMCCC ARCH_SOC_ID support
2. Usage of the custom soc attribute groups already supported in the
infrastucture instead of device_create_file which eliminates the need
for any cleanup when soc is unregistered
3. Minor clean up switching to use standard DEVICE_ATTR_RO() instead of
direct __ATTR
* tag 'soc-attr-updates-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: smccc: Add ARCH_SOC_ID support
ARM: OMAP2: Use custom soc attribute group instead of device_create_file
ARM: OMAP2: Switch to use DEVICE_ATTR_RO()
soc: ux500: Use custom soc attribute group instead of device_create_file
soc: ux500: Switch to use DEVICE_ATTR_RO()
soc: integrator: Use custom soc attribute group instead of device_create_file
soc: integrator: Switch to use DEVICE_ATTR_RO()
soc: realview: Use custom soc attribute group instead of device_create_file
soc: realview: Switch to use DEVICE_ATTR_RO()
Link: https://lore.kernel.org/r/20200706165312.40697-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SMCCC v1.2 adds a new optional function SMCCC_ARCH_SOC_ID to obtain a
SiP defined SoC identification value. Add support for the same.
Also using the SoC bus infrastructure, let us expose the platform
specific SoC atrributes under sysfs.
There are various ways in which it can be represented in shortened form
for efficiency and ease of parsing for userspace. The chosen form is
described in the ABI document.
Link: https://lore.kernel.org/r/20200625095939.50861-1-sudeep.holla@arm.com
Cc: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Some external devices can support completing thunderbolt authentication
when they are unplugged. For this to work though, the link controller must
remain operational.
The only device known to support this right now is the Dell WD19TB, so add
a quirk for this.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This allows userspace to have a shorter period of time that the device
is unusable and to call it at a more convenient time.
For example flushing the image may happen while the user is using the
machine and authenticating/rebooting may happen while logging out.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXvcu5w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymcewCgrSLzmFCeXWeoK5qIyv+hRaBu1eoAoJ2eDihC
5ahPGEU1CGstW3Rp0Yhv
=LAT6
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.8-rc3 to resolve some reported
issues.
Nothing major here:
- gadget driver fixes
- cdns3 driver fixes
- xhci fixes
- renesas_usbhs driver fixes
- some new device support with ids
- documentation update
All of these have been in linux-next with no reported issues"
* tag 'usb-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
usb: renesas_usbhs: getting residue from callback_result
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
xhci: Poll for U0 after disabling USB2 LPM
xhci: Return if xHCI doesn't support LPM
usb: host: xhci-mtk: avoid runtime suspend when removing hcd
xhci: Fix enumeration issue when setting max packet size for FS devices.
xhci: Fix incorrect EP_STATE_MASK
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
Revert "usb: dwc3: exynos: Add support for Exynos5422 suspend clk"
usb: gadget: udc: Potential Oops in error handling code
usb: phy: tegra: Fix unnecessary check in tegra_usb_phy_probe()
usb: dwc3: pci: Fix reference count leak in dwc3_pci_resume_work
usb: cdns3: ep0: add spinlock for cdns3_check_new_setup
usb: cdns3: trace: using correct dir value
usb: cdns3: ep0: fix the test mode set incorrectly
usb: typec: tcpci_rt1711h: avoid screaming irq causing boot hangs
USB: ohci-sm501: Add missed iounmap() in remove
cdc-acm: Add DISABLE_ECHO quirk for Microchip/SMSC chip
...
Hardware offset available as calibscale sysfs attributes are real
physical values exprimed in SI units.
calibscale_available sysfs attributes represents the range of
acceptable values.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Felipe has based his patches on that tag, so update my usb-linus branch
to it as well so that I can pull his patches in here easier.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB4 spec specifies standard access to retimers (both on-board and
cable) through USB4 port sideband access. This makes it possible to
upgrade their firmware in the same way than we already do with the
routers.
This enumerates on-board retimers under each USB4 port when the link
comes up and adds them to the bus under the router the retimer belongs
to. Retimers are exposed in sysfs with name like <device>:<port>.<index>
where device is the router the retimer belongs to, port is the USB4 port
the retimer is connected to and index is the retimer index under that
port (starting from 1). This applies to the upstream USB4 port as well
so if there is on-board retimer between the port and the router it is
also added accordingly.
At this time we do not add cable retimers but there is no techincal
restriction to do so in the future if needed. It is not clear whether it
makes sense to upgrade their firmwares and at least Thunderbolt 3 cables
it has not been done outside of lab environments.
The sysfs interface is made to follow the router NVM upgrade to make it
easy to extend the existing userspace (fwupd) to handle these as well.
Signed-off-by: Kranthi Kuntala <kranthi.kuntala@intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The freescale.com e-mail domain is no longer active for quite some
time. Switch Li Jun's e-mail address to the NXP domain.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20200529104234.25136-1-festevam@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement support for fetching nvdimm health information via
H_SCM_HEALTH hcall as documented in Ref[1]. The hcall returns a pair
of 64-bit bitmap, bitwise-and of which is then stored in
'struct papr_scm_priv' and subsequently partially exposed to
user-space via newly introduced dimm specific attribute
'papr/flags'. Since the hcall is costly, the health information is
cached and only re-queried, 60s after the previous successful hcall.
The patch also adds a documentation text describing flags reported by
the the new sysfs attribute 'papr/flags' is also introduced at
Documentation/ABI/testing/sysfs-bus-papr-pmem.
[1] commit 58b278f568 ("powerpc: Provide initial documentation for
PAPR hcalls")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20200615124407.32596-4-vaibhav@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Current version supports a server line starting Intel® Xeon® Processor
Scalable Family and introduces mapping for IIO Uncore units only.
Other units can be added on demand.
IIO stack to PMON mapping is exposed through:
/sys/devices/uncore_iio_<pmu_idx>/dieX
where dieX is file which holds "Segment:Root Bus" for PCIe root port,
which can be monitored by that IIO PMON block.
Details are explained in Documentation/ABI/testing/sysfs-devices-mapping
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Roman Sudarikov <roman.sudarikov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lkml.kernel.org/r/20200601083543.30011-4-alexander.antonov@linux.intel.com
IIO_CONCENTRATION together with INFO_RAW specifier is used for reporting
raw concentrations of pollutants. Raw value should be meaningless
before being properly scaled. Because of that description shouldn't
mention raw value unit whatsoever.
Fix this by rephrasing existing description so it follows conventions
used throughout IIO ABI docs.
Fixes: 8ff6b3bc94 ("iio: chemical: Add IIO_CONCENTRATION channel type")
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
kobject:
* Increase number of allowed uevent variables
power-supply core:
* Add power-supply type in uevent
* Cleanup property handling in core
* Make property and usb_type pointers const
* Convert core power-supply DT binding to YAML
* Cleanup HWMON code
* Add new health status "calibration required"
* Add new properties for manufacture date and
capacity error margin
battery drivers:
* new cw2015 battery driver used by pine64 Pinebook Pro laptop
* axp22: blacklist on Meegopad T02
* sc27xx: support current/voltage reading
* max17042: support time-to-empty reading
* simple-battery: add more battery parameters
* bq27xxx: convert DT binding document to YAML
* sbs-battery: add TI BQ20Z65 support, fix technology property, convert
DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date,
capacity error margin, average current, charge current
and voltage and support calibration required health
status
* misc. fixes
charger drivers:
* bq25890: cleanup, implement charge type, precharge current and input
current limiting properties
* bd70528: use new linear range helper library
* bd99954: new charger driver
* mp2629: new charger driver
* misc. fixes
reboot drivers:
* oxnas-restart: introduce new driver
* syscon-reboot: convert DT binding to YAML, add parent syscon device support
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=He9L
-----END PGP SIGNATURE-----
Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"This time there are lots of changes. Quite a few changes to the core,
lots of driver changes and one change to kobject core (with Ack from
Greg).
Summary:
kobject:
- Increase number of allowed uevent variables
power-supply core:
- Add power-supply type in uevent
- Cleanup property handling in core
- Make property and usb_type pointers const
- Convert core power-supply DT binding to YAML
- Cleanup HWMON code
- Add new health status "calibration required"
- Add new properties for manufacture date and capacity error margin
battery drivers:
- new cw2015 battery driver used by pine64 Pinebook Pro laptop
- axp22: blacklist on Meegopad T02
- sc27xx: support current/voltage reading
- max17042: support time-to-empty reading
- simple-battery: add more battery parameters
- bq27xxx: convert DT binding document to YAML
- sbs-battery: add TI BQ20Z65 support, fix technology property,
convert DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date, capacity
error margin, average current, charge current and voltage and
support calibration required health status
- misc fixes
charger drivers:
- bq25890: cleanup, implement charge type, precharge current and
input current limiting properties
- bd70528: use new linear range helper library
- bd99954: new charger driver
- mp2629: new charger driver
- misc fixes
reboot drivers:
- oxnas-restart: introduce new driver
- syscon-reboot: convert DT binding to YAML, add parent syscon device
support
- misc fixes"
* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
power: supply: cw2015: Attach OF ID table to the driver
power: reset: gpio-poweroff: add missing '\n' in dev_err()
Revert "power: supply: sbs-battery: simplify read_read_string_data"
Revert "power: supply: sbs-battery: add PEC support"
dt-bindings: power: sbs-battery: Convert to yaml
power: supply: sbs-battery: constify power-supply property array
power: supply: sbs-battery: switch to i2c's probe_new
power: supply: sbs-battery: switch from of_property_* to device_property_*
power: supply: sbs-battery: add ability to disable charger broadcasts
power: supply: sbs-battery: fix idle battery status
power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
power: supply: sbs-battery: add MANUFACTURE_DATE support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
power: supply: sbs-battery: add PEC support
power: supply: sbs-battery: simplify read_read_string_data
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
power: supply: sbs-battery: Add TI BQ20Z65 support
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
...
Bunch of updates to drivers like dmatest, dw-edma, ioat,
mmp-tdma and k3-udma along with Renesas binding update to json-schema
-----BEGIN PGP SIGNATURE-----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=Jun4
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"A fairly small dmaengine update which includes mostly driver updates
(dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas
binding update to json-schema"
* tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits)
dmaengine: imx-sdma: initialize all script addresses
dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources
dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt
dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor
dmaengine: at_xdmac: Replace zero-length array with flexible-array
dmaengine: at_hdmac: Replace zero-length array with flexible-array
dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array
dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code
dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe()
dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()'
dmaengine: qcom_hidma: use true,false for bool variable
dmaengine: dw-edma: support local dma device transfer semantics
dmaengine: Fix doc strings to satisfy validation script
dmaengine: Include dmaengine.h into dmaengine.c
dmaengine: dmatest: Describe members of struct dmatest_info
dmaengine: dmatest: Describe members of struct dmatest_params
dmaengine: dmatest: Allow negative timeout value to specify infinite wait
Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait"
dmaengine: stm32-dma: direct mode support through device tree
dt-bindings: dma: add direct mode support through device tree in stm32-dma
...
In this round, we've added some knobs to enhance compression feature and harden
testing environment. In addition, we've fixed several bugs reported from Android
devices such as long discarding latency, device hanging during quota_sync, etc.
Enhancement:
- support lzo-rle algorithm
- add two ioctls to release and reserve blocks for compression
- support partial truncation/fiemap on compressed file
- introduce sysfs entries to attach IO flags explicitly
- add iostat trace point along with read io stat
Bug fix:
- fix long discard latency
- flush quota data by f2fs_quota_sync correctly
- fix to recover parent inode number for power-cut recovery
- fix lz4/zstd output buffer budget
- parse checkpoint mount option correctly
- avoid inifinite loop to wait for flushing node/meta pages
- manage discard space correctly
And some refactoring and clean up patches were added.
-----BEGIN PGP SIGNATURE-----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=MiEC
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added some knobs to enhance compression feature
and harden testing environment. In addition, we've fixed several bugs
reported from Android devices such as long discarding latency, device
hanging during quota_sync, etc.
Enhancements:
- support lzo-rle algorithm
- add two ioctls to release and reserve blocks for compression
- support partial truncation/fiemap on compressed file
- introduce sysfs entries to attach IO flags explicitly
- add iostat trace point along with read io stat
Bug fixes:
- fix long discard latency
- flush quota data by f2fs_quota_sync correctly
- fix to recover parent inode number for power-cut recovery
- fix lz4/zstd output buffer budget
- parse checkpoint mount option correctly
- avoid inifinite loop to wait for flushing node/meta pages
- manage discard space correctly
And some refactoring and clean up patches were added"
* tag 'f2fs-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: attach IO flags to the missing cases
f2fs: add node_io_flag for bio flags likewise data_io_flag
f2fs: remove unused parameter of f2fs_put_rpages_mapping()
f2fs: handle readonly filesystem in f2fs_ioc_shutdown()
f2fs: avoid utf8_strncasecmp() with unstable name
f2fs: don't return vmalloc() memory from f2fs_kmalloc()
f2fs: fix retry logic in f2fs_write_cache_pages()
f2fs: fix wrong discard space
f2fs: compress: don't compress any datas after cp stop
f2fs: remove unneeded return value of __insert_discard_tree()
f2fs: fix wrong value of tracepoint parameter
f2fs: protect new segment allocation in expand_inode_data
f2fs: code cleanup by removing ifdef macro surrounding
f2fs: avoid inifinite loop to wait for flushing node pages at cp_error
f2fs: flush dirty meta pages when flushing them
f2fs: fix checkpoint=disable:%u%%
f2fs: compress: fix zstd data corruption
f2fs: add compressed/gc data read IO stat
f2fs: fix potential use-after-free issue
f2fs: compress: don't handle non-compressed data in workqueue
...
Pull x86 srbds fixes from Thomas Gleixner:
"The 9th episode of the dime novel "The performance killer" with the
subtitle "Slow Randomizing Boosts Denial of Service".
SRBDS is an MDS-like speculative side channel that can leak bits from
the random number generator (RNG) across cores and threads. New
microcode serializes the processor access during the execution of
RDRAND and RDSEED. This ensures that the shared buffer is overwritten
before it is released for reuse. This is equivalent to a full bus
lock, which means that many threads running the RNG instructions in
parallel have the same effect as the same amount of threads issuing a
locked instruction targeting an address which requires locking of two
cachelines at once.
The mitigation support comes with the usual pile of unpleasant
ingredients:
- command line options
- sysfs file
- microcode checks
- a list of vulnerable CPUs identified by model and stepping this
time which requires stepping match support for the cpu match logic.
- the inevitable slowdown of affected CPUs"
* branch 'x86/srbds' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add Ivy Bridge to affected list
x86/speculation: Add SRBDS vulnerability and mitigation documentation
x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigation
x86/cpu: Add 'table' argument to cpu_matches()
This patch adds another way to attach bio flags to node writes.
Description: Give a way to attach REQ_META|FUA to node writes
given temperature-based bits. Now the bits indicate:
* REQ_META | REQ_FUA |
* 5 | 4 | 3 | 2 | 1 | 0 |
* Cold | Warm | Hot | Cold | Warm | Hot |
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here, along
with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new deletions
or additions, just a ton of tiny cleanups all over the tree done by a
lot of different people. Most coding style, but many actual real fixes
and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK
4zCG8NxAPFsQ1QP2SZPq
=jEyw
-----END PGP SIGNATURE-----
Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here,
along with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new
deletions or additions, just a ton of tiny cleanups all over the tree
done by a lot of different people. Most coding style, but many actual
real fixes and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
staging: rtl8723bs: Use common packet header constants
staging: sm750fb: Add names to proc_setBLANK args
staging: most: usb: init return value in default path of switch/case expression
staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
staging: vchiq: move vchiq_release_message() into vchiq
staging: vchi: Get rid of C++ guards
staging: vchi: Get rid of not implemented function declarations
staging: vchi: Get rid of vchiq_status_to_vchi()
staging: vchi: Get rid of vchi_service_set_option()
staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
staging: vchiq: Move copy callback handling into vchiq
staging: vchi: Get rid of vchi_queue_user_message()
staging: vchi: Get rid of vchi_service_destroy()
staging: most: usb: use function sysfs_streq
staging: most: usb: add missing put_device calls
staging: most: usb: use correct error codes
staging: most: usb: replace code to calculate array index
staging: most: usb: don't use error path to exit function on success
staging: most: usb: move allocation of URB out of critical section
staging: most: usb: return 0 instead of variable
...
A few large, long discussed works this time. The RNBD block driver has
been posted for nearly two years now, and the removal of FMR has been a
recurring discussion theme for a long time. The usual smattering of
features and bug fixes.
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and a
mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block RDMA
device specific to ionos's cloud environment. It brings strong multipath
and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs and
drivers. FRWR should be preferred for at least a decade now.
-----BEGIN PGP SIGNATURE-----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=9zTe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Greg Kroah-Hartman
Vinod Koul
Xu Yilun
Joel Stanley
Alexandru Tachici
Gwendal Grignou
Christian Eggers
Ahmad Fatoum
Eugene Zaikonnikov
Dave Jiang
Jason Gunthorpe
Subbaraman Narayanamurthy
Matt Ranostay
Kajol Jain
Alexander Usyskin
Linus Torvalds
Sebastian Reichel
Vaibhav Jain
Crag Wang
Chanwoo Choi
Samuel Thibault
Dan Williams
Ingo Molnar
Saravana Kannan
Arnd Bergmann
Marek Behún
Dan Murphy
Niklas Cassel
Vadim Pasternak
Philippe Bergheaud
Bruno Meneguele
Oded Gabbay
Barry Song
Maxim Uvarov
Daeho Jeong
Sudeep Holla
Peter Zijlstra
Richard Gong
Mario Limonciello
Tomasz Duszynski
Jean-Baptiste Maneyrol
Mauro Carvalho Chehab
Kranthi Kuntala
Jason A. Donenfeld
Asutosh Das
Fabio Estevam
Roman Sudarikov
Jaegeuk Kim