Граф коммитов

69 Коммитов

Автор SHA1 Сообщение Дата
Rafael J. Wysocki eed5d21507 PM / Runtime: Do not increment device usage counts before probing
The pm_runtime_get_noresume() calls before really_probe() and
before executing __device_attach() for each driver on the
device's bus cause problems to happen if probing fails and if the
driver has enabled runtime PM for the device in its .probe()
callback.  Namely, in that case, if the device has been resumed
by the driver after enabling its runtime PM and if it turns out that
.probe() should return an error, the driver is supposed to suspend
the device and disable its runtime PM before exiting .probe().
However, because the device's runtime PM usage counter was
incremented by the core before calling .probe(), the driver's attempt
to suspend the device will not succeed and the device will remain in
the full-power state after the failing .probe() has returned.

To fix this issue, remove the pm_runtime_get_noresume() calls from
driver_probe_device() and from device_attach() and replace the
corresponding pm_runtime_put_sync() calls with pm_runtime_idle()
to preserve the existing behavior (which is to check if the device
is idle and to suspend it eventually in that case after probing).

Reported-and-tested-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 19:25:49 -07:00
Mark Brown 8153584e3f driver core: Move deferred devices to the end of dpm_list before probing
When deferred probe was originally added the idea was that devices which
defer their probes would move themselves to the end of dpm_list in order
to try to keep the assumptions that we're making about the list being in
roughly the order things should be suspended correct. However this hasn't
been what's been happening and doing it requires a lot of duplicated code
to do the moves.

Instead take a simple, brute force solution and have the deferred probe
code push devices to the end of dpm_list before it retries the probe. This
does mean we lock the dpm_list a bit more often but it's very simple and
the code shouldn't be a fast path. We do the move with the deferred mutex
dropped since doing things with fewer locks held simultaneously seems like
a good idea.

This approach was most recently suggested by Grant Likely.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Grant Likely <grant.likely@secretlab.ca>,
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-16 18:05:45 -07:00
Greg Kroah-Hartman 6fbfd0592e Merge v3.5-rc5 into driver-core-next
This picks up the big printk fixes, and resolves a merge issue with:
	drivers/extcon/extcon_gpio.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-05 08:25:34 -07:00
Hans de Goede 0998d06310 device-core: Ensure drvdata = NULL when no driver is bound
1) drvdata is for a driver to store a pointer to driver specific data
2) If no driver is bound, there is no driver specific data associated with
   the device
3) Thus logically drvdata should be NULL if no driver is bound.

But many drivers don't clear drvdata on device_release, or set drvdata
early on in probe and leave it set on probe error. Both of which results
in a dangling pointer in drvdata.

This patch enforce for drvdata to be NULL after device_release or on probe
failure.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 16:40:41 -07:00
Kuninori Morimoto 1d29cfa574 driver core: fixup reversed deferred probe order
If driver requests probe deferral,
it will be added to deferred_probe_pending_list
by driver_deferred_probe_add(), but, it used list_add().
Because of that, deferred probe will be run as reversed order.
This patch uses list_add_tail(), and solved this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13 13:42:39 -07:00
Greg Kroah-Hartman 8b0372a258 driver core: minor comment formatting cleanups
Came in in the deferred probe patch, quick, clean them up before a
kernel janitor finds them and sends me 4 individual patches to fix them
up...

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 12:20:37 -08:00
Greg Kroah-Hartman ef8a3fd6e5 driver core: move the deferred probe pointer into the private area
Nothing outside of the driver core needs to get to the deferred probe
pointer, so move it inside the private area of 'struct device' so no one
tries to mess around with it.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 12:17:22 -08:00
Grant Likely d1c3414c2a drivercore: Add driver probe deferral mechanism
Allow drivers to report at probe time that they cannot get all the resources
required by the device, and should be retried at a later time.

This should completely solve the problem of getting devices
initialized in the right order.  Right now this is mostly handled by
mucking about with initcall ordering which is a complete hack, and
doesn't even remotely handle the case where device drivers are in
modules.  This approach completely sidesteps the issues by allowing
driver registration to occur in any order, and any driver can request
to be retried after a few more other drivers get probed.

v4: - Integrate Manjunath's addition of a separate workqueue
    - Change -EAGAIN to -EPROBE_DEFER for drivers to trigger deferral
    - Update comment blocks to reflect how the code really works
v3: - Hold off workqueue scheduling until late_initcall so that the bulk
      of driver probes are complete before we start retrying deferred devices.
    - Tested with simple use cases.  Still needs more testing though.
      Using it to get rid of the gpio early_initcall madness, or to replace
      the ASoC internal probe deferral code would be ideal.
v2: - added locking so it should no longer be utterly broken in that regard
    - remove device from deferred list at device_del time.
    - Still completely untested with any real use case, but has been
      boot tested.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dilan Lee <dilee@nvidia.com>
Cc: Manjunath GKondaiah <manjunath.gkondaiah@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08 11:53:13 -08:00
Wolfram Sang bcbe4f94d1 drivers: base: print rejected matches with DEBUG_DRIVER
When DEBUG_DRIVER is activated, be verbose and explicitly state when a
device<->driver match was rejected by the probe-function of the driver.
Now all code-paths report what is currently happening which helps
debugging, because you don't have to remember that no printout means
the match is rejected (and then you still don't know if it was because
of ENODEV or ENXIO).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 16:21:15 -07:00
Linus Torvalds 39ab05c8e0 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits)
  debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
  sysfs: remove "last sysfs file:" line from the oops messages
  drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"
  memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION
  SYSFS: Fix erroneous comments for sysfs_update_group().
  driver core: remove the driver-model structures from the documentation
  driver core: Add the device driver-model structures to kerneldoc
  Translated Documentation/email-clients.txt
  RAW driver: Remove call to kobject_put().
  reboot: disable usermodehelper to prevent fs access
  efivars: prevent oops on unload when efi is not enabled
  Allow setting of number of raw devices as a module parameter
  Introduce CONFIG_GOOGLE_FIRMWARE
  driver: Google Memory Console
  driver: Google EFI SMI
  x86: Better comments for get_bios_ebda()
  x86: get_bios_ebda_length()
  misc: fix ti-st build issues
  params.c: Use new strtobool function to process boolean inputs
  debugfs: move to new strtobool
  ...

Fix up trivial conflicts in fs/debugfs/file.c due to the same patch
being applied twice, and an unrelated cleanup nearby.
2011-05-19 18:24:11 -07:00
Rafael J. Wysocki e1866b33b1 PM / Runtime: Rework runtime PM handling during driver removal
The driver core tries to prevent race conditions between runtime PM
and driver removal from happening by incrementing the runtime PM
usage counter of the device and executing pm_runtime_barrier() before
running the bus notifier and the ->remove() callbacks provided by the
device's subsystem or driver.  This guarantees that, if a future
runtime suspend of the device has been scheduled or a runtime resume
or idle request has been queued up right before the driver removal,
it will be canceled or waited for to complete and no other
asynchronous runtime suspend or idle requests for the device will be
put into the PM workqueue until the ->remove() callback returns.
However, it doesn't prevent resume requests from being queued up
after pm_runtime_barrier() has been called and it doesn't prevent
pm_runtime_resume() from executing the device subsystem's runtime
resume callback.  Morever, it prevents the device's subsystem or
driver from putting the device into the suspended state by calling
pm_runtime_suspend() from its ->remove() routine.  This turns out to
be a major inconvenience for some subsystems and drivers that want to
leave the devices they handle in the suspended state.

To really prevent runtime PM callbacks from racing with the bus
notifier callback in __device_release_driver(), which is necessary,
because the notifier is used by some subsystems to carry out
operations affecting the runtime PM functionality, use
pm_runtime_get_sync() instead of the combination of
pm_runtime_get_noresume() and pm_runtime_barrier().  This will resume
the device if it's in the suspended state and will prevent it from
being suspended again until pm_runtime_put_*() is called.

To allow subsystems and drivers to put devices into the suspended
state by calling pm_runtime_suspend() from their ->remove() routines,
execute pm_runtime_put_sync() after running the bus notifier in
__device_release_driver().  This will require subsystems and drivers
to make their ->remove() callbacks avoid races with runtime PM
directly, but it will allow of more flexibility in the handling of
devices during the removal of their drivers.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-17 23:19:17 +02:00
Uwe Kleine-König c870508240 driver core: let dev_set_drvdata return int instead of void as it can fail
Before commit

	b402843 (Driver core: move dev_get/set_drvdata to drivers/base/dd.c)

calling dev_set_drvdata with dev=NULL was an unchecked error. After some
discussion about what to return in this case removing the check (and so
producing a null pointer exception) seems fine.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22 17:09:13 -07:00
Sebastian Ott 8497d6a21c driver-core: fix race between device_register and driver_register
When a device is registered to a bus it will be a) added to the list
of devices of the bus and b) bind to a driver (if one matches). As a
result of a driver being registered at this bus between a) and b) this
device could already be bound to a driver. This leads to a warning
and incorrect refcounting.
To fix this add a check to device_attach to identify an already bound
device.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-22 17:06:29 -07:00
Magnus Damm 45daef0fdc Driver core: Add BUS_NOTIFY_BIND_DRIVER
Add BUS_NOTIFY_BIND_DRIVER as a bus notifier event.

For driver binding/unbinding we with this in
place have the following bus notifier events:
 - BUS_NOTIFY_BIND_DRIVER - before ->probe()
 - BUS_NOTIFY_BOUND_DRIVER - after ->probe()
 - BUS_NOTIFY_UNBIND_DRIVER - before ->remove()
 - BUS_NOTIFY_UNBOUND_DRIVER - after ->remove()

The event BUS_NOTIFY_BIND_DRIVER allows bus code
to be notified that ->probe() is about to be called.

Useful for bus code that needs to setup hardware before
the driver gets to run. With this in place platform
drivers can be loaded and unloaded as modules and the
new BIND event allows bus code to control for instance
device clocks that must be enabled before the driver
can be executed.

Without this patch there is no way for the bus code to
get notified that a modular driver is about to be probed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 13:53:35 -07:00
Stefani Seibold fbb88fadf7 driver-core: fix potential race condition in drivers/base/dd.c
This patch fix a potential race condition in the driver_bound() function
in the file driver/base/dd.c.

The broadcast of the BUS_NOTIFY_BOUND_DRIVER notifier should be done
after adding the new device to the driver list. Otherwise notifier
listener will fail if they use functions like usb_find_interface().

The patch is against kernel 2.6.33. Please merge it.

Signed-off-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:29 -07:00
Greg Kroah-Hartman 8e9394ce24 Driver core: create lock/unlock functions for struct device
In the future, we are going to be changing the lock type for struct
device (once we get the lockdep infrastructure properly worked out)  To
make that changeover easier, and to possibly burry the lock in a
different part of struct device, let's create some functions to lock and
unlock a device so that no out-of-core code needs to be changed in the
future.

This patch creates the device_lock/unlock/trylock() functions, and
converts all in-tree users to them.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Ming Lei <tom.leiming@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Magnus Damm <damm@igel.co.jp>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Alex Chiang <achiang@hp.com>
Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrew Patterson <andrew.patterson@hp.com>
Cc: Yu Zhao <yu.zhao@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: CHENG Renquan <rqcheng@smu.edu.sg>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Frans Pop <elendil@planet.nl>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-07 17:04:52 -08:00
André Goddard Rosa af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Greg Kroah-Hartman b402843787 Driver core: move dev_get/set_drvdata to drivers/base/dd.c
No one should directly access the driver_data field, so remove the field
and make it private.  We dynamically create the private field now if it
is needed, to handle drivers that call get/set before they are
registered with the driver core.

Also update the copyright notices on these files while we are there.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Rafael J. Wysocki 5e928f77a0 PM: Introduce core framework for run-time PM of I/O devices (rev. 17)
Introduce a core framework for run-time power management of I/O
devices.  Add device run-time PM fields to 'struct dev_pm_info'
and device run-time PM callbacks to 'struct dev_pm_ops'.  Introduce
a run-time PM workqueue and define some device run-time PM helper
functions at the core level.  Document all these things.

Special thanks to Alan Stern for his help with the design and
multiple detailed reviews of the pereceding versions of this patch
and to Magnus Damm for testing feedback.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@igel.co.jp>
2009-08-23 00:04:44 +02:00
Dmitry Torokhov 59a3cd7f9d Driver core: fix comment for device_attach()
We are looking for matching drivers, not devices.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:24 -07:00
Joerg Roedel 309b7d60a3 driver core: add BUS_NOTIFY_UNBOUND_DRIVER event
This patch adds a new bus notifier event which is emitted _after_ a
device is removed from its driver. This event will be used by the
dma-api debug code to check if a driver has released all dma allocations
for that device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15 21:30:24 -07:00
Arjan van de Ven d4d5291c8c driver synchronization: make scsi_wait_scan more advanced
There is currently only one way for userspace to say "wait for my storage
device to get ready for the modules I just loaded": to load the
scsi_wait_scan module. Expectations of userspace are that once this
module is loaded, all the (storage) devices for which the drivers
were loaded before the module load are present.

Now, there are some issues with the implementation, and the async
stuff got caught in the middle of this: The existing code only
waits for the scsy async probing to finish, but it did not take
into account at all that probing might not have begun yet.
(Russell ran into this problem on his computer and the fix works for him)

This patch fixes this more thoroughly than the previous "fix", which
had some bad side effects (namely, for kernel code that wanted to wait for
the scsi scan it would also do an async sync, which would deadlock if you did
it from async context already.. there's a report about that on lkml):
The patch makes the module first wait for all device driver probes, and then it
will wait for the scsi parallel scan to finish.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-21 19:40:00 -07:00
Greg Kroah-Hartman 8940b4f312 driver core: move knode_driver into private structure
Nothing outside of the driver core should ever touch knode_driver, so
move it out of the public eye.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:25 -07:00
Ming Lei b23530ebc3 driver core: remove polling for driver_probe_done(v5)
This patch removes 100ms polling for driver_probe_done in
wait_for_device_probe(), and uses wait_event() instead.
Removing polling in fs initialization may lead to
a faster boot.

This patch also changes the return type of wait_for_device_done()
from int to void.

This patch is against Arjan's patch in linux-next tree.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:25 -07:00
Ming Lei 49b420a13f driver core: check bus->match without holding device lock
This patch moves bus->match out from driver_probe_device and
does not hold device lock to check the match between a device
and a driver.

The idea has been verified by the commit 6cd4958609,
which leads to a faster boot. But the commit 6cd4958609 has
the following drawbacks: 1),only does the quick check in
the path of __driver_attach->driver_probe_device, not in other
paths; 2),for a matched device and driver, check the same match
twice. It is a waste of cpu ,especially for some drivers with long
device id table (eg. usb-storage driver).

This patch adds a helper of driver_match_device to check the match
in all paths, and testes the match only once.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-24 16:38:24 -07:00
Arjan van de Ven 216773a787 Consolidate driver_probe_done() loops into one place
there's a few places that currently loop over driver_probe_done(), and
I'm about to add another one. This patch abstracts it into a helper
to reduce duplication.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-21 14:17:17 -08:00
Greg Kroah-Hartman cda5e83fde Revert "driver core: move knode_driver into private structure"
This reverts commit 93e746db18.

Turns out that device_initialize shouldn't fail silently.
This series needs to be reworked in order to get into proper
shape.

Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-09 14:44:18 -08:00
Ming Lei 7232800ba8 driver core:fix duplicate removing driver link in __device_release_driver
In __device_release_driver(),driver_sysfs_remove() has removed the
driver link under device dir in sysfs, but sysfs_remove_link() is
called again to do such thing. Remove the duplicate call to
sys_remove_link().

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:33 -08:00
Greg Kroah-Hartman 93e746db18 driver core: move knode_driver into private structure
Nothing outside of the driver core should ever touch knode_driver, so
move it out of the public eye.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:32 -08:00
Kay Sievers 1e0b2cf933 driver core: struct device - replace bus_id with dev_name(), dev_set_name()
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:31 -08:00
Arjan van de Ven 6cd4958609 device model: Do a quickcheck for driver binding before doing an expensive check
This patch adds a quick check for the driver<->device match before
taking the locks and doin gthe expensive checks. Taking the lock hurts
in asynchronous boot context where the device lock gets hit; one of the
init functions takes the lock and goes to do an expensive hardware init;
the other init functions walk the same PCI list and get stuck on the
lock as a result.

For the common case, we can know there's no chance whatsoever of a match
if the device isn't in the drivers ID table... so this patch does that
check as a best-effort-avoid-the-lock approach.

Bootcharts for before and after can be seen at
http://www.fenrus.org/before.svg
http://www.fenrus.org/after.svg

Note the long time "agp_ali_init" takes in the first graph; my laptop
doesn't even have an ALI chip in it!  (the bootgraphs look a bit
dissimilar, but that's the point, the first one has a bunch of arbitrary
delays in it that cause it to look very different)

This reduces my kernel boot time by about 20%

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:50 -07:00
Harvey Harrison 2b3a302a09 driver core: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-19 19:10:29 -07:00
Greg Kroah-Hartman 4a3ad20ccd Driver core: coding style fixes
Fix up a number of coding style issues in the drivers/base/ directory
that have annoyed me over the years.  checkpatch.pl is now very happy.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 22:50:12 -08:00
Alan Stern ef2c51746d Driver core: fix race in __device_release_driver
This patch (as1013) was suggested by David Woodhouse; it fixes a race
in the driver core.  If a device is unregistered at the same time as
its driver is unloaded, the driver's code pages may be unmapped while
the remove method is still running.  The calls to get_driver() and
put_driver() were intended to prevent this, but they don't work if the
driver's module count has already dropped to 0.

Instead, the patch keeps the device on the driver's list until after
the remove method has returned.  This forces the necessary
synchronization to occur.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:35 -08:00
Greg Kroah-Hartman 7dc72b2842 Driver core: clean up debugging messages
The driver core debugging messages are a mess.  This provides a unified
message that makes them actually useful.

The format for new kobject debug messages should be:
	driver/bus/class: 'OBJECT_NAME': FUNCTION_NAME: message.\n

Note, the class code is not changed in this patch due to pending patches
in my queue that this would conflict with.  A later patch will clean
them up.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:35 -08:00
Greg Kroah-Hartman e5dd127846 Driver core: move the static kobject out of struct driver
This patch removes the kobject, and a few other driver-core-only fields
out of struct driver and into the driver core only.  Now drivers can be
safely create on the stack or statically (like they currently are.)

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:35 -08:00
Greg Kroah-Hartman c6f7e72a3f driver core: remove fields from struct bus_type
struct bus_type is static everywhere in the kernel.  This moves the
kobject in the structure out of it, and a bunch of other private only to
the driver core fields are now moved to a private structure.  This lets
us dynamically create the backing kobject properly and gives us the
chance to be able to document to users exactly how to use the struct
bus_type as there are no fields they can improperly access.

Thanks to Kay for the build fixes on this patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Stefan Richter ab71c6f076 driver core: fix kernel doc of device_release_driver
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:02 -07:00
Stefan Richter 1f5681aae8 driver core: properly get driver in device_release_driver
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:01 -07:00
Stephen Hemminger 475c5a1518 Driver core: kill unused code
CC      drivers/base/dd.o
drivers/base/dd.c:211: warning: =E2=80=98device_probe_drivers=E2=80=99 defi=
ned but not used

Looks like the following is dead.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-08 12:41:07 -07:00
Adrian Bunk 5adc55da4a PCI: remove the broken PCI_MULTITHREAD_PROBE option
This patch removes the PCI_MULTITHREAD_PROBE option that had already 
been marked as broken.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-02 19:02:38 -07:00
Cornelia Huck c6a46696f9 driver core: don't fail attaching the device if it cannot be bound
Don't fail bus_attach_device() if the device cannot be bound.

If dev->driver has been specified, reset it to NULL if device_bind_driver()
failed and add the device as an unbound device.  As a result,
bus_attach_device() now cannot fail, and we can remove some checking from
device_add().

Also remove an unneeded check in bus_rescan_devices_helper().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:29 -07:00
Cornelia Huck 21c7f30b1d driver core: per-subsystem multithreaded probing
Make multithreaded probing work per subsystem instead of per driver.

It doesn't make much sense to probe the same device for multiple drivers in
parallel (after all, only one driver can bind to the device).  Instead, create
a probing thread for each device that probes the drivers one after another. 
Also make the decision to use multi-threaded probe per bus instead of per
device and adapt the pci code.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27 10:57:28 -07:00
Tejun Heo 9ac7849e35 devres: device resource management
Implement device resource management, in short, devres.  A device
driver can allocate arbirary size of devres data which is associated
with a release function.  On driver detach, release function is
invoked on the devres data, then, devres data is freed.

devreses are typed by associated release functions.  Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function.  Both usages are
supported.

devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).

This patch adds devres core including documentation and the following
managed interfaces.

* alloc/free	: devm_kzalloc(), devm_kzfree()
* IO region	: devm_request_region(), devm_release_region()
* IRQ		: devm_request_irq(), devm_free_irq()
* DMA		: dmam_alloc_coherent(), dmam_free_coherent(),
		  dmam_declare_coherent_memory(), dmam_pool_create(),
		  dmam_pool_destroy()
* PCI		: pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap		: devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
		  devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
		  pcim_iomap(), pcim_iounmap()

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-09 17:39:36 -05:00
Cornelia Huck cb986b749c driver core: Change function call order in device_bind_driver().
Change function call order in device_bind_driver().

If we create symlinks (which might fail) before adding the device to the list
we don't have to clean up afterwards (which we didn't).

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:13 -08:00
Cornelia Huck c578abbc20 driver core: Don't stop probing on ->probe errors.
Don't stop on the first ->probe error that is not -ENODEV/-ENXIO.

There might be a driver registered returning an unresonable return code, and
this stops probing completely even though it may make sense to try the next
possible driver. At worst, we may end up with an unbound device.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-02-07 10:37:12 -08:00
Kay Sievers 1901fb2604 Driver core: fix "driver" symlink timing
Create the "driver" link before the child device may be created by
the probing logic. This makes it possible for userspace (udev), to
determine the driver property of the parent device, at the time the
child device is created.

Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:51:58 -08:00
Benjamin Herrenschmidt 116af37820 Driver core: add notification of bus events
I finally did as you suggested and added the notifier to the struct
bus_type itself. There are still problems to be expected is something
attaches to a bus type where the code can hook in different struct
device sub-classes (which is imho a big bogosity but I won't even try to
argue that case now) but it will solve nicely a number of issues I've
had so far.

That also means that clients interested in registering for such
notifications have to do it before devices are added and after bus types
are registered. Fortunately, most bus types that matter for the various
usage scenarios I have in mind are registerd at postcore_initcall time,
which means I have a really nice spot at arch_initcall time to add my
notifiers.

There are 4 notifications provided. Device being added (before hooked to
the bus) and removed (failure of previous case or after being unhooked
from the bus), along with driver being bound to a device and about to be
unbound.

The usage I have for these are:

 - The 2 first ones are used to maintain a struct device_ext that is
hooked to struct device.firmware_data. This structure contains for now a
pointer to the Open Firmware node related to the device (if any), the
NUMA node ID (for quick access to it) and the DMA operations pointers &
iommu table instance for DMA to/from this device. For bus types I own
(like IBM VIO or EBUS), I just maintain that structure directly from the
bus code when creating the devices. But for bus types managed by generic
code like PCI or platform (actually, of_platform which is a variation of
platform linked to Open Firmware device-tree), I need this notifier.

 - The other two ones have a completely different usage scenario. I have
cases where multiple devices and their drivers depend on each other. For
example, the IBM EMAC network driver needs to attach to a MAL DMA engine
which is a separate device, and a PHY interface which is also a separate
device. They are all of_platform_device's (well, about to be with my
upcoming patches) but there is no say in what precise order the core
will "probe" them and instanciate the various modules. The solution I
found for that is to have the drivers for emac to use multithread_probe,
and wait for a driver to be bound to the target MAL and PHY control
devices (the device-tree contains reference to the MAL and PHY interface
nodes, which I can then match to of_platform_devices). Right now, I've
been polling, but with that notifier, I can more cleanly wait (with a
timeout of course).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-12-01 14:51:58 -08:00
Andrew Morton 735a7ffb73 [PATCH] drivers: wait for threaded probes between initcall levels
The multithreaded-probing code has a problem: after one initcall level (eg,
core_initcall) has been processed, we will then start processing the next
level (postcore_initcall) while the kernel threads which are handling
core_initcall are still executing.  This breaks the guarantees which the
layered initcalls previously gave us.

IOW, we want to be multithreaded _within_ an initcall level, but not between
different levels.

Fix that up by causing the probing code to wait for all outstanding probes at
one level to complete before we start processing the next level.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-27 15:34:51 -07:00
Akinobu Mita 4d66423820 driver core: kmalloc() failure check in driver_probe_device
driver_probe_device() is missing kmalloc() failure check.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18 12:49:56 -07:00