Граф коммитов

384 Коммитов

Автор SHA1 Сообщение Дата
Lu Baolu ef848b7e5a iommu/vt-d: Setup pasid entry for RID2PASID support
when the scalable mode is enabled, there is no second level
page translation pointer in the context entry any more (for
DMA request without PASID). Instead, a new RID2PASID field
is introduced in the context entry. Software can choose any
PASID value to set RID2PASID and then setup the translation
in the corresponding PASID entry. Upon receiving a DMA request
without PASID, hardware will firstly look at this RID2PASID
field and then treat this request as a request with a pasid
value specified in RID2PASID field.

Though software is allowed to use any PASID for the RID2PASID,
we will always use the PASID 0 as a sort of design decision.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:58 +01:00
Lu Baolu 6f7db75e1c iommu/vt-d: Add second level page table interface
This adds the interfaces to setup or tear down the structures
for second level page table translations. This includes types
of second level only translation and pass through.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:58 +01:00
Lu Baolu 3b33d4ab32 iommu/vt-d: Reserve a domain id for FL and PT modes
Vt-d spec rev3.0 (section 6.2.3.1) requires that each pasid
entry for first-level or pass-through translation should be
programmed with a domain id different from those used for
second-level or nested translation. It is recommended that
software could use a same domain id for all first-only and
pass-through translations.

This reserves a domain id for first-level and pass-through
translations.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:58 +01:00
Lu Baolu 4f2ed183cf iommu/vt-d: Move page table helpers into header
So that they could also be used in other source files.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Cc: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:57 +01:00
Lu Baolu 0bbeb01a4f iommu/vt-d: Manage scalalble mode PASID tables
In scalable mode, pasid structure is a two level table with
a pasid directory table and a pasid table. Any pasid entry
can be identified by a pasid value in below way.

   1
   9                       6 5      0
    .-----------------------.-------.
    |              PASID    |       |
    '-----------------------'-------'    .-------------.
             |                    |      |             |
             |                    |      |             |
             |                    |      |             |
             |     .-----------.  |      .-------------.
             |     |           |  |----->| PASID Entry |
             |     |           |  |      '-------------'
             |     |           |  |Plus  |             |
             |     .-----------.  |      |             |
             |---->| DIR Entry |-------->|             |
             |     '-----------'         '-------------'
.---------.  |Plus |           |
| Context |  |     |           |
|  Entry  |------->|           |
'---------'        '-----------'

This changes the pasid table APIs to support scalable mode
PASID directory and PASID table. It also adds a helper to
get the PASID table entry according to the pasid value.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:57 +01:00
Lu Baolu 765b6a98c1 iommu/vt-d: Enumerate the scalable mode capability
The Intel vt-d spec rev3.0 introduces a new translation
mode called scalable mode, which enables PASID-granular
translations for first level, second level, nested and
pass-through modes. At the same time, the previous
Extended Context (ECS) mode is deprecated (no production
ever implements ECS).

This patch adds enumeration for Scalable Mode and removes
the deprecated ECS enumeration. It provides a boot time
option to disable scalable mode even hardware claims to
support it.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-12-11 10:45:57 +01:00
Sohil Mehta 3569dd07aa iommu/vt-d: Handle domain agaw being less than iommu agaw
The Intel IOMMU driver opportunistically skips a few top level page
tables from the domain paging directory while programming the IOMMU
context entry. However there is an implicit assumption in the code that
domain's adjusted guest address width (agaw) would always be greater
than IOMMU's agaw.

The IOMMU capabilities in an upcoming platform cause the domain's agaw
to be lower than IOMMU's agaw. The issue is seen when the IOMMU supports
both 4-level and 5-level paging. The domain builds a 4-level page table
based on agaw of 2. However the IOMMU's agaw is set as 3 (5-level). In
this case the code incorrectly tries to skip page page table levels.
This causes the IOMMU driver to avoid programming the context entry. The
fix handles this case and programs the context entry accordingly.

Fixes: de24e55395 ("iommu/vt-d: Simplify domain_context_mapping_one")
Cc: <stable@vger.kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reported-by: Ramos Falcon, Ernesto R <ernesto.r.ramos.falcon@intel.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-22 17:07:14 +01:00
Linus Torvalds d1f2b1710d IOMMU Updates for Linux v4.20
These updates bring:
 
 	- Debugfs support for the Intel VT-d driver. When enabled, it
 	  now also exposes some of its internal data structures to
 	  user-space for debugging purposes.
 
 	- ARM-SMMU driver now uses the generic deferred flushing
 	  and fast-path iova allocation code. This is expected to be a
 	  major performance improvement, as this allocation path scales
 	  a lot better.
 
 	- Support for r8a7744 in the Renesas iommu driver
 
 	- Couple of minor fixes and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJb0vixAAoJECvwRC2XARrj0lkQALur432cGae8225gLNG+Ab1B
 lDGz/8uJeV4V552r58msq/yFpVascoMYOCgS+5N5J/jn5UiPnWxk//Uz2lvvCsFn
 3Z4HswSbmNLSuEHmN3/1CK28An44LjYxtnH/zAEaHRJgWNmC05lO4glPXaSIBwVS
 ve6ULymHJittCHFNNAstNBvMYirYV2y+FYxoq6EteTuCruNNXR78KQV7TqPYI+uZ
 0DwaXUyxO+HZbVeLpOnj/WHZ6+EUY0cHwHuk8U6ZCHnINZ+k9knt+WUvYu7wPCtj
 jGIyJXW5BG0rjJZnVUQs9BFXFSJLV2Ap8M3zKVIyFAUAyStEtGHct0YMRC29GX/J
 e45GPbElAZqx1NWRGGTV0xTsH5Gn85S2nP3p7iiPhj5zUhX/6SreZBDQdC+brtsB
 8HG85xohsUkVmRq/ez4hu0yqXtB66ppV7TcOjyixybG+ixRPtUwTbiaYUxbvkZTr
 hcYUVLGcpJX463VjUKGoRPFL/jZ6BXUWdLVllZPYgDT+IBXtQx1TB20DDtj5V2mR
 3m7B0xLQJDWdarhdA9Oj0FQj7ivmwmitcJ9EoNvHSRdEoE1iIy1vHv/7v/GokRVS
 J1YT5ZYAsGHBgZIsL7FpVA37i9t3JPVvgakUV/ZfLDyG3v+P0+eS3gNhECYt5luS
 D8G7Jy+2vsitO/ZCyu/r
 =q1HJ
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - Debugfs support for the Intel VT-d driver.

   When enabled, it now also exposes some of its internal data
   structures to user-space for debugging purposes.

 - ARM-SMMU driver now uses the generic deferred flushing and fast-path
   iova allocation code.

   This is expected to be a major performance improvement, as this
   allocation path scales a lot better.

 - Support for r8a7744 in the Renesas iommu driver

 - Couple of minor fixes and improvements all over the place

* tag 'iommu-updates-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (39 commits)
  iommu/arm-smmu-v3: Remove unnecessary wrapper function
  iommu/arm-smmu-v3: Add SPDX header
  iommu/amd: Add default branch in amd_iommu_capable()
  dt-bindings: iommu: ipmmu-vmsa: Add r8a7744 support
  iommu/amd: Move iommu_init_pci() to .init section
  iommu/arm-smmu: Support non-strict mode
  iommu/io-pgtable-arm-v7s: Add support for non-strict mode
  iommu/arm-smmu-v3: Add support for non-strict mode
  iommu/io-pgtable-arm: Add support for non-strict mode
  iommu: Add "iommu.strict" command line option
  iommu/dma: Add support for non-strict mode
  iommu/arm-smmu: Ensure that page-table updates are visible before TLBI
  iommu/arm-smmu-v3: Implement flush_iotlb_all hook
  iommu/arm-smmu-v3: Avoid back-to-back CMD_SYNC operations
  iommu/arm-smmu-v3: Fix unexpected CMD_SYNC timeout
  iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
  iommu/arm-smmu-v3: Fix a couple of minor comment typos
  iommu: Fix a typo
  iommu: Remove .domain_{get,set}_windows
  iommu: Tidy up window attributes
  ...
2018-10-26 10:50:10 -07:00
Linus Torvalds 70408a9987 Miscellaneous ia64 fixes from Christoph
-----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQQW3WBGcnu5yJnSXn0kTJLX0iGMLAUCW84v0RQcdG9ueS5sdWNr
 QGludGVsLmNvbQAKCRAkTJLX0iGMLGJGAP9fUhp7O4ef6PHxGtvmKHRqkTX6a4b5
 /oASkd4qIetgzAEA7hwUopUllbq13IRqc+1Z93wymj4vGjT+jV+2unI0ZAc=
 =3Yoq
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux

Pull ia64 updates from Tony Luck:
 "Miscellaneous ia64 fixes from Christoph"

* tag 'please-pull-next' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  intel-iommu: mark intel_dma_ops static
  ia64: remove machvec_dma_sync_{single,sg}
  ia64/sn2: remove no-ops dma sync methods
  ia64: remove the unused iommu_dma_init function
  ia64: remove the unused pci_iommu_shutdown function
  ia64: remove the unused bad_dma_address symbol
  ia64: remove iommu_dma_supported
  ia64: remove the dead iommu_sac_force variable
  ia64: remove the kern_mem_attribute export
2018-10-23 11:06:43 +01:00
Joerg Roedel 2f2fbfb71e Merge branches 'arm/renesas', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd' and 'core' into next 2018-10-10 18:09:37 +02:00
Sohil Mehta ee2636b867 iommu/vt-d: Enable base Intel IOMMU debugfs support
Add a new config option CONFIG_INTEL_IOMMU_DEBUGFS and do the base
enabling for Intel IOMMU debugfs.

Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Co-Developed-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 14:33:43 +02:00
Sohil Mehta 26b86092c4 iommu/vt-d: Relocate struct/function declarations to its header files
To reuse the static functions and the struct declarations, move them to
corresponding header files and export the needed functions.

Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 14:33:43 +02:00
Lu Baolu be9e6598ae iommu/vt-d: Handle memory shortage on pasid table allocation
Pasid table memory allocation could return failure due to memory
shortage. Limit the pasid table size to 1MiB because current 8MiB
contiguous physical memory allocation can be hard to come by. W/o
a PASID table, the device could continue to work with only shared
virtual memory impacted. So, let's go ahead with context mapping
even the memory allocation for pasid table failed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107783
Fixes: cc580e4126 ("iommu/vt-d: Per PCI device pasid table interfaces")

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-and-tested-by: Pelton Kyle D <kyle.d.pelton@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-09-25 14:33:02 +02:00
Christoph Hellwig 02b4da5f84 intel-iommu: mark intel_dma_ops static
ia64 currently explicitly assigns it to dma_ops, but that same work is
already done by intel_iommu_init a little later, so we can remove the
duplicate assignment and mark the variable static.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-09-17 10:15:58 -07:00
Christoph Hellwig beec903f71 ia64: remove iommu_dma_supported
The generic dma_direct_supported helper already used by intel-iommu on
x86 does a better job than the ia64 reimplementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2018-09-17 10:15:19 -07:00
Linus Torvalds 18b8bfdfba IOMMU Update for Linux v4.19
Including:
 
 	- PASID table handling updates for the Intel VT-d driver. It
 	  implements a global PASID space now so that applications
 	  usings multiple devices will just have one PASID.
 
 	- A new config option to make iommu passthroug mode the default.
 
 	- New sysfs attribute for iommu groups to export the type of the
 	  default domain.
 
 	- A debugfs interface (for debug only) usable by IOMMU drivers
 	  to export internals to user-space.
 
 	- R-Car Gen3 SoCs support for the ipmmu-vmsa driver
 
 	- The ARM-SMMU now aborts transactions from unknown devices and
 	  devices not attached to any domain.
 
 	- Various cleanups and smaller fixes all over the place.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbf/9wAAoJECvwRC2XARrjcuYP/3dIsOFN7Xb4sTOB5wxk4wmD
 2Rm5o/18cFekEy4M8fwIBCYkzH/McohgKbOFcH6XiCxIwJ5RdXzITLAwmp4PbvIO
 KtwppXSp+MQtboip/bp6NDNBhABErgUtgdXawwENCCrFivXDsB8W4wnXESAOkLv9
 4fLXrUgDFCAquLZpLqQobXHhajtGAkSekaasphlhejXFulFyF1YcEUcliU7eXZ0R
 rZjL4Zqcyyi5kv6d3WhL+tvmmhr7wfMsMPaW18eRf9tXvMpWRM2GOAj65coI2AWs
 1T1kW/jvvrxnewOsmo1nYlw7R07uiRkUfHmJ9tY65xW4120HJFhdFLPUQZXfrX/b
 wcGbheYIh6cwAaZBtPJ35bPeW6pREkDOShohbzt45T62Q837cBkr3zyHhNsoOXHS
 13YVtTd2vtPa4iLdu2qmEOC1OuhQnMvqHqX0iN8U74QbDxEYYvMfAdx0JL3hmPp/
 uynY3QmXIKCeZg+vH2qcWHm07nfaAr5y8WSPA0crnqeznD5zJ4kvJf5dFGmDyTKr
 pyTkhidkifm6ZejrJsDZveoZdLpHrOatrqKaoLFh2crMUG3d807NYqQ3JmA3NDjg
 zPbYyU4joFGNVjd3XkSnRTGxR6YvLIwNbkQ3b/K/B5AqWJ6VrTbbTCOa4GSms6rF
 Qm8wRrmYaycKxkcMqtls
 =TeYQ
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - PASID table handling updates for the Intel VT-d driver. It implements
   a global PASID space now so that applications usings multiple devices
   will just have one PASID.

 - A new config option to make iommu passthroug mode the default.

 - New sysfs attribute for iommu groups to export the type of the
   default domain.

 - A debugfs interface (for debug only) usable by IOMMU drivers to
   export internals to user-space.

 - R-Car Gen3 SoCs support for the ipmmu-vmsa driver

 - The ARM-SMMU now aborts transactions from unknown devices and devices
   not attached to any domain.

 - Various cleanups and smaller fixes all over the place.

* tag 'iommu-updates-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (42 commits)
  iommu/omap: Fix cache flushes on L2 table entries
  iommu: Remove the ->map_sg indirection
  iommu/arm-smmu-v3: Abort all transactions if SMMU is enabled in kdump kernel
  iommu/arm-smmu-v3: Prevent any devices access to memory without registration
  iommu/ipmmu-vmsa: Don't register as BUS IOMMU if machine doesn't have IPMMU-VMSA
  iommu/ipmmu-vmsa: Clarify supported platforms
  iommu/ipmmu-vmsa: Fix allocation in atomic context
  iommu: Add config option to set passthrough as default
  iommu: Add sysfs attribyte for domain type
  iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register
  iommu/arm-smmu: Error out only if not enough context interrupts
  iommu/io-pgtable-arm-v7s: Abort allocation when table address overflows the PTE
  iommu/io-pgtable-arm: Fix pgtable allocation in selftest
  iommu/vt-d: Remove the obsolete per iommu pasid tables
  iommu/vt-d: Apply per pci device pasid table in SVA
  iommu/vt-d: Allocate and free pasid table
  iommu/vt-d: Per PCI device pasid table interfaces
  iommu/vt-d: Add for_each_device_domain() helper
  iommu/vt-d: Move device_domain_info to header
  iommu/vt-d: Apply global PASID in SVA
  ...
2018-08-24 13:10:38 -07:00
Marek Szyprowski d834c5ab83 kernel/dma: remove unsupported gfp_mask parameter from dma_alloc_from_contiguous()
The CMA memory allocator doesn't support standard gfp flags for memory
allocation, so there is no point having it as a parameter for
dma_alloc_from_contiguous() function.  Replace it by a boolean no_warn
argument, which covers all the underlaying cma_alloc() function
supports.

This will help to avoid giving false feeling that this function supports
standard gfp flags and callers can pass __GFP_ZERO to get zeroed buffer,
what has already been an issue: see commit dd65a941f6 ("arm64:
dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag").

Link: http://lkml.kernel.org/r/20180709122020eucas1p21a71b092975cb4a3b9954ffc63f699d1~-sqUFoa-h2939329393eucas1p2Y@eucas1p2.samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michał Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 16:20:32 -07:00
Joerg Roedel 6488a7f35e Merge branches 'arm/shmobile', 'arm/renesas', 'arm/msm', 'arm/smmu', 'arm/omap', 'x86/amd', 'x86/vt-d' and 'core' into next 2018-08-08 12:02:27 +02:00
Christoph Hellwig d88e61faad iommu: Remove the ->map_sg indirection
All iommu drivers use the default_iommu_map_sg implementation, and there
is no good reason to ever override it.  Just expose it as iommu_map_sg
directly and remove the indirection, specially in our post-spectre world
where indirect calls are horribly expensive.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-08-08 11:06:20 +02:00
Lu Baolu d9737953d8 iommu/vt-d: Remove the obsolete per iommu pasid tables
The obsolete per iommu pasid tables are no longer used. Hence,
clean up them.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:26 +02:00
Lu Baolu 4774cc5245 iommu/vt-d: Apply per pci device pasid table in SVA
This patch applies the per pci device pasid table in the Shared
Virtual Address (SVA) implementation.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:25 +02:00
Lu Baolu a7fc93fed9 iommu/vt-d: Allocate and free pasid table
This patch allocates a PASID table for a PCI device at the time
when the dmar dev_info is attached to dev->archdata.iommu, and
free it in the opposite case.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:25 +02:00
Lu Baolu cc580e4126 iommu/vt-d: Per PCI device pasid table interfaces
This patch adds the interfaces for per PCI device pasid
table management. Currently we allocate one pasid table
for all PCI devices under the scope of an IOMMU. It's
insecure in some cases where multiple devices under one
single IOMMU unit support PASID features. With per PCI
device pasid table, we can achieve finer protection and
isolation granularity.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:24 +02:00
Lu Baolu 85319dcc89 iommu/vt-d: Add for_each_device_domain() helper
This adds a helper named for_each_device_domain() to iterate
over the elements in device_domain_list and invoke a callback
against each element. This allows to search the device_domain
list in other source files.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:24 +02:00
Lu Baolu 9ddbfb4213 iommu/vt-d: Move device_domain_info to header
This allows the per device iommu data and some helpers to be
used in other files.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:24 +02:00
Lu Baolu 562831747f iommu/vt-d: Global PASID name space
This adds the system wide PASID name space for the PASID
allocation. Currently we are using per IOMMU PASID name
spaces which are not suitable for some use cases. For an
example, one application (associated with a PASID) might
talk to two physical devices simultaneously while the two
devices could reside behind two different IOMMU units.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 14:44:23 +02:00
Lu Baolu 2db1581e1f Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"
This reverts commit ab96746aaa.

The commit ab96746aaa ("iommu/vt-d: Clean up pasid quirk for
pre-production devices") triggers ECS mode on some platforms
which have broken ECS support. As the result, graphic device
will be inoperable on boot.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017

Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-20 13:55:56 +02:00
Jacob Pan 1c48db4492 iommu/vt-d: Fix dev iotlb pfsid use
PFSID should be used in the invalidation descriptor for flushing
device IOTLBs on SRIOV VFs.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-06 13:26:10 +02:00
Jacob Pan 0f725561e1 iommu/vt-d: Add definitions for PFSID
When SRIOV VF device IOTLB is invalidated, we need to provide
the PF source ID such that IOMMU hardware can gauge the depth
of invalidation queue which is shared among VFs. This is needed
when device invalidation throttle (DIT) capability is supported.

This patch adds bit definitions for checking and tracking PFSID.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-07-06 13:26:10 +02:00
Christoph Hellwig 7ec916f82c Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
This commit may cause a less than required dma mask to be used for
some allocations, which apparently leads to module load failures for
iwlwifi sometimes.

This reverts commit d657c5c73c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Fabio Coatti <fabio.coatti@gmail.com>
Tested-by: Fabio Coatti <fabio.coatti@gmail.com>
2018-07-05 13:32:06 -06:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Linus Torvalds 18f1837632 IOMMU Updates for Linux v4.18
Nothing big this time. In particular:
 
 	- Debugging code for Tegra-GART
 
 	- Improvement in Intel VT-d fault printing to prevent
 	  soft-lockups when on fault storms
 
 	- Improvements in AMD IOMMU event reporting
 
 	- NUMA aware allocation in io-pgtable code for ARM
 
 	- Various other small fixes and cleanups all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJbGpkiAAoJECvwRC2XARrjLy0QAMFpRFbrS+BcbtoCA13L1AX9
 KBDn7kzirihBLEUdsOtj3qiB/hgKPqf0eaKDHQ8UjbyzikmumnnhDtMzz0k2CQJW
 lplyOv+18OGOToWFqeUe5FC7P206CSd7OlOkis9OBJd3UWg1+GnrcQrdXfsnD71s
 b7ocFQnZP366svLNrV4g9f1JuRcWtyHn+yoFKFAOnAIqETFXMUH22fGiwbNGUD5I
 YGY9E1l7EYPf0K5rJU7T6gyxVtoBvWu4c6Y9Pgrt7IJwgR6Me1oJ5FeOCBrVZt6E
 fzkScrFIARjFX/oZoMCHFjcfstcv2qDOtoU/DrtQ7xQaW5WDvKK/AEXHQggnSg3G
 OYEia3lRvBe9UxoF3MDZAo+FCNw43S2cdLMqZK7XL0WCpEHGTqlYdirJJKhzgfe1
 EvcBXs3Ndq7Pwp5/LbZ3K6+SX9J2G32vAiHizl7ndBSsqRdUDgDPXbkqbhSD9gjU
 OCrhfdhmIyUUhm2smnuVsV7WZ5MYeK3tRYhlD/A4so7frDcmtVkjWAGi3g1llsH8
 atJ1VKJg14xbRcO681jPcaaKMaLIWYkNWpv4VYdgUc4u4l3QB9fJbuIOyMRlSQtV
 cMO1qemwHik2+zyTK1IP+55rT/Szf8JTC5Hshqhczqkutlh6E//+Tz3ru3/+IqrO
 5ElW7OudqreeWMut3/ur
 =ndW8
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "Nothing big this time. In particular:

   - Debugging code for Tegra-GART

   - Improvement in Intel VT-d fault printing to prevent soft-lockups
     when on fault storms

   - Improvements in AMD IOMMU event reporting

   - NUMA aware allocation in io-pgtable code for ARM

   - Various other small fixes and cleanups all over the place"

* tag 'iommu-updates-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/io-pgtable-arm: Make allocations NUMA-aware
  iommu/amd: Prevent possible null pointer dereference and infinite loop
  iommu/amd: Fix grammar of comments
  iommu: Clean up the comments for iommu_group_alloc
  iommu/vt-d: Remove unnecessary parentheses
  iommu/vt-d: Clean up pasid quirk for pre-production devices
  iommu/vt-d: Clean up unused variable in find_or_alloc_domain
  iommu/vt-d: Fix iotlb psi missing for mappings
  iommu/vt-d: Introduce __mapping_notify_one()
  iommu: Remove extra NULL check when call strtobool()
  iommu/amd: Update logging information for new event type
  iommu/amd: Update the PASID information printed to the system log
  iommu/tegra: gart: Fix gart_iommu_unmap()
  iommu/tegra: gart: Add debugging facility
  iommu/io-pgtable-arm: Use for_each_set_bit to simplify code
  iommu/qcom: Simplify getting .drvdata
  iommu: Remove depends on HAS_DMA in case of platform dependency
  iommu/vt-d: Ratelimit each dmar fault printing
2018-06-08 10:44:33 -07:00
Lu Baolu ab96746aaa iommu/vt-d: Clean up pasid quirk for pre-production devices
The pasid28 quirk is needed only for some pre-production devices.
Remove it to make the code concise.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15 16:34:52 +02:00
Lu Baolu fcc35c6342 iommu/vt-d: Clean up unused variable in find_or_alloc_domain
Remove it to make the code more concise.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15 16:34:52 +02:00
Peter Xu 87684fd997 iommu/vt-d: Fix iotlb psi missing for mappings
When caching mode is enabled for IOMMU, we should send explicit IOTLB
PSIs even for newly created mappings.  However these events are missing
for all intel_iommu_map() callers, e.g., iommu_map().  One direct user
is the vfio-pci driver.

To make sure we'll send the PSIs always when necessary, this patch
firstly introduced domain_mapping() helper for page mappings, then fixed
the problem by generalizing the explicit map IOTLB PSI logic into that
new helper. With that, we let iommu_domain_identity_map() to use the
simplified version to avoid sending the notifications, while for all the
rest of cases we send the notifications always.

For VM case, we send the PSIs to all the backend IOMMUs for the domain.

This patch allows the nested device assignment to work with QEMU (assign
device firstly to L1 guest, then assign it again to L2 guest).

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15 16:31:41 +02:00
Peter Xu eed91a0b85 iommu/vt-d: Introduce __mapping_notify_one()
Introduce this new helper to notify one newly created mapping on one
single IOMMU.  We can further leverage this helper in the next patch.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-05-15 16:31:41 +02:00
Gil Kupfer cef74409ea PCI: Add "pci=noats" boot parameter
Adds a "pci=noats" boot parameter.  When supplied, all ATS related
functions fail immediately and the IOMMU is configured to not use
device-IOTLB.

Any function that checks for ATS capabilities directly against the devices
should also check this flag.  Currently, such functions exist only in IOMMU
drivers, and they are covered by this patch.

The motivation behind this patch is the existence of malicious devices.
Lots of research has been done about how to use the IOMMU as protection
from such devices.  When ATS is supported, any I/O device can access any
physical address by faking device-IOTLB entries.  Adding the ability to
ignore these entries lets sysadmins enhance system security.

Signed-off-by: Gil Kupfer <gilkup@cs.technion.ac.il>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
2018-05-10 17:56:02 -05:00
Linus Torvalds e5c372280b IOMMU Updates for Linux v4.17
These updates come with:
 
 	- OF_IOMMU support for the Rockchip iommu driver so that it can
 	  use generic DT bindings
 
 	- Rework of locking in the AMD IOMMU interrupt remapping code to
 	  make it work better in RT kernels
 
 	- Support for improved iotlb flushing in the AMD IOMMU driver
 
 	- Support for 52-bit physical and virtual addressing in the
 	  ARM-SMMU
 
 	- Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJazi2BAAoJECvwRC2XARrjYVwP/AyXK7CjRvaiHFopIUO0WpwY
 V3GiKrODtSNHqPSKuFnqIssIhxZPw/SKFz6E/pe08pZ/pxHYTxeTL78Wz7D1+4Sp
 n0YokSM5qLb660OTQVnyKNCku8cEMCb9hkQ/75SFgwcILQYF93cZBDIdBn93OKVO
 6xAOE+tqd8Daulnk0YpdiCTFTJPzYHPl6B7scoUav26uaKxWeMJxeYe+EXC+4WQG
 U1u/jDiVXyllzGgRqqfrmO4L2acmsK8HL97hD4+m1URJKDlb8ho6xwaRThFZWqXS
 SbrYnvH0ruWGrLiQKmVUssw8FqbcXCzq3236g2O8jE4jqWSm70twg+q31iMjwD7v
 bwsJGMkk7aLrquv9Zpaylpf8tRECk5bjhTFC2zB0pdum5XLx47j0IHKWMLPYhkCz
 E0pBefvuhoSTbt/5X0urSRzH2Hk4ljEsM+QjlfH8SN3ALTljFjay607wbxC7t35M
 LEL5AuNsDDBddoJIi9D13CdJEZa4lps8dbpB8m40lQVvmiLPLcKraaG0RfKQ397T
 wsxhsDOQYM2FCwfUP3n8RTsMKRIp/UVkKY+2G7AsKofciSeulK6nDbrV7jFnitx4
 vTxbRgpNejJpqzKZG/W9lCGWk1BhmQK/Cbu6JW5IA4+ew9omWkFp61U6rtc645Te
 6cNEYBiMz/RZIiC2b18J
 =kte5
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:

 - OF_IOMMU support for the Rockchip iommu driver so that it can use
   generic DT bindings

 - rework of locking in the AMD IOMMU interrupt remapping code to make
   it work better in RT kernels

 - support for improved iotlb flushing in the AMD IOMMU driver

 - support for 52-bit physical and virtual addressing in the ARM-SMMU

 - various other small fixes and cleanups

* tag 'iommu-updates-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (53 commits)
  iommu/io-pgtable-arm: Avoid warning with 32-bit phys_addr_t
  iommu/rockchip: Support sharing IOMMU between masters
  iommu/rockchip: Add runtime PM support
  iommu/rockchip: Fix error handling in init
  iommu/rockchip: Use OF_IOMMU to attach devices automatically
  iommu/rockchip: Use IOMMU device for dma mapping operations
  dt-bindings: iommu/rockchip: Add clock property
  iommu/rockchip: Control clocks needed to access the IOMMU
  iommu/rockchip: Fix TLB flush of secondary IOMMUs
  iommu/rockchip: Use iopoll helpers to wait for hardware
  iommu/rockchip: Fix error handling in attach
  iommu/rockchip: Request irqs in rk_iommu_probe()
  iommu/rockchip: Fix error handling in probe
  iommu/rockchip: Prohibit unbind and remove
  iommu/amd: Return proper error code in irq_remapping_alloc()
  iommu/amd: Make amd_iommu_devtable_lock a spin_lock
  iommu/amd: Drop the lock while allocating new irq remap table
  iommu/amd: Factor out setting the remap table for a devid
  iommu/amd: Use `table' instead `irt' as variable name in amd_iommu_update_ga()
  iommu/amd: Remove the special case from alloc_irq_table()
  ...
2018-04-11 18:50:41 -07:00
Shaokun Zhang f746a025d3 iommu/vt-d:Remove unused variable
Unused after commit <42e8c186b595> ("iommu/vt-d: Simplify io/tlb flushing
in intel_iommu_unmap"), cleanup it.

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-03-29 10:31:25 +02:00
Christoph Hellwig d657c5c73c iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()
Use the dma_direct_*() helpers and clean up the code flow.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-9-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:58 +01:00
Christoph Hellwig fec777c385 x86/dma: Use DMA-direct (CONFIG_DMA_DIRECT_OPS=y)
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now
functionally equivalent to the x86 nommu dma_map implementation, so
switch over to using it.

That includes switching from using x86_dma_supported in various IOMMU
drivers to use dma_direct_supported instead, which provides the same
functionality.

Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Muli Ben-Yehuda <mulix@mulix.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: iommu@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/20180319103826.12853-4-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-20 10:01:56 +01:00
Linus Torvalds ef9417e8a9 IOMMU Updates for Linux v4.16
Including:
 
 	- 5-level page-table support for the Intel IOMMU.
 
 	- Error reporting improvements for the AMD IOMMU driver
 
 	- Additional DT bindings for ipmmu-vmsa (Renesas)
 
 	- Smaller fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJafGLMAAoJECvwRC2XARrjPTUP/0g/n8H5j35DevM56G62MrNq
 fNweMxPm7AqZQR/dnIkPnlH5NWfP1z5PZ47H/nAMAqd7cKHVOfUmzoufiUSGP92V
 eweFF4ufjqA+V5fluGcnt0UNxgbEGs+cEgf9jbEkUlpmFisV7BwOCGIJbVdHMrxG
 jkrr/L17iX82uqIru9JmfB2K0pEPBtBHQSZpooGHAyGsR4xU6nX1X64mV/a9Oh/2
 qzfzRsAbF5ZtAszktVz9j2AMfp40BrrAcHzmvepjS5yTjlH9t5J8UdM48GHWU+Zp
 ptmlJ3fJybe0yUI6GDfG9M6+/RX0T/xMvV1QcSJW6KP0q/i9p4hrIQufoOzstMYM
 uCsFPlhMLFSDcQy6CZ3M6VEsU5mdJ0KMn0xAN8rBLAok1ScGKrlP5qWpXJLeUJRp
 Ie7R4WVT+Ly/SLppoiLagiTW3ZD/gQh+YPNgYwXptMdDmiqSRdXm0nF6bzTiKk1Z
 8h8oEj2ittwBTC+fXuP+1C/wOKYL6KJUGnykLcHBDO+/wkEWOP0KM6939+T7IjHt
 zkiUapRegRvWyDOq1HFVl0tBCRLo1dqwG/3PFpqHUkj6Iyqyhd8y/V5IM3GTSI+d
 1tHBz6dXin62N/xYu/ScpmPMerpjP/AtMqd3dvx7Q+9vgNIAVSPMKFqeXhQ3P2ph
 +p1CdWvPYPb7wUhTvcja
 =+LFh
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This time there are not a lot of changes coming from the IOMMU side.

  That is partly because I returned from my parental leave late in the
  development process and probably partly because everyone was busy with
  Spectre and Meltdown mitigation work and didn't find the time for
  IOMMU work. So here are the few changes that queued up for this merge
  window:

   - 5-level page-table support for the Intel IOMMU.

   - error reporting improvements for the AMD IOMMU driver

   - additional DT bindings for ipmmu-vmsa (Renesas)

   - small fixes and cleanups"

* tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu: Clean up of_iommu_init_fn
  iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hook
  iommu/msm: Claim bus ops on probe
  iommu/vt-d: Enable 5-level paging mode in the PASID entry
  iommu/vt-d: Add a check for 5-level paging support
  iommu/vt-d: Add a check for 1GB page support
  iommu/vt-d: Enable upto 57 bits of domain address width
  iommu/vt-d: Use domain instead of cache fetching
  iommu/exynos: Don't unconditionally steal bus ops
  iommu/omap: Fix debugfs_create_*() usage
  iommu/vt-d: clean up pr_irq if request_threaded_irq fails
  iommu: Check the result of iommu_group_get() for NULL
  iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings
  iommu/ipmmu-vmsa: Add r8a7796 DT binding
  iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices
  iommu/amd - Record more information about unknown events
2018-02-08 12:03:54 -08:00
Sohil Mehta 5e3b4a15dd iommu/vt-d: Enable upto 57 bits of domain address width
Update the IOMMU default domain address width to 57 bits. This would
enable the IOMMU to do upto 5-levels of paging for second level
translations - IOVA translation requests without PASID.

Even though the maximum supported address width is being increased to
57, __iommu_calculate_agaw() would set the actual supported address
width to the maximum support available in IOMMU hardware.

Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17 15:02:49 +01:00
Peter Xu 9d2e6505f6 iommu/vt-d: Use domain instead of cache fetching
after commit a1ddcbe930 ("iommu/vt-d: Pass dmar_domain directly into
iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter
to iommu_flush_iotlb_psi(), so no need to fetch it from cache again.

More importantly, a NULL reference pointer bug is reported on RHEL7 (and
it can be reproduced on some old upstream kernels too, e.g., v4.13) by
unplugging an 40g nic from a VM (hard to test unplug on real host, but
it should be the same):

https://bugzilla.redhat.com/show_bug.cgi?id=1531367

[   24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed
[   24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press
[   29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK
[   29.783557] iommu: Removing device 0000:01:00.0 from group 3
[   29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304
[   29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120
[   29.786486] PGD 0
[   29.786487] P4D 0
[   29.786812]
[   29.787390] Oops: 0000 [#1] SMP
[   29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng
[   29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14
[   29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014
[   29.797593] Workqueue: pciehp-0 pciehp_power_thread
[   29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000
[   29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120
[   29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086
[   29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025
[   29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000
[   29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0
[   29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400
[   29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000
[   29.805792] FS:  0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000
[   29.806923] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0
[   29.808747] Call Trace:
[   29.809156]  flush_unmaps_timeout+0x126/0x1c0
[   29.809800]  domain_exit+0xd6/0x100
[   29.810322]  device_notifier+0x6b/0x70
[   29.810902]  notifier_call_chain+0x4a/0x70
[   29.812822]  __blocking_notifier_call_chain+0x47/0x60
[   29.814499]  blocking_notifier_call_chain+0x16/0x20
[   29.816137]  device_del+0x233/0x320
[   29.817588]  pci_remove_bus_device+0x6f/0x110
[   29.819133]  pci_stop_and_remove_bus_device+0x1a/0x20
[   29.820817]  pciehp_unconfigure_device+0x7a/0x1d0
[   29.822434]  pciehp_disable_slot+0x52/0xe0
[   29.823931]  pciehp_power_thread+0x8a/0xa0
[   29.825411]  process_one_work+0x18c/0x3a0
[   29.826875]  worker_thread+0x4e/0x3b0
[   29.828263]  kthread+0x109/0x140
[   29.829564]  ? process_one_work+0x3a0/0x3a0
[   29.831081]  ? kthread_park+0x60/0x60
[   29.832464]  ret_from_fork+0x25/0x30
[   29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf
[   29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0
[   29.840362] CR2: 0000000000000304
[   29.841716] ---[ end trace b10ec0d6900868d3 ]---

This patch fixes that problem if applied to v4.13 kernel.

The bug does not exist on latest upstream kernel since it's fixed as a
side effect of commit 13cf017446 ("iommu/vt-d: Make use of iova
deferred flushing", 2017-08-15).  But IMHO it's still good to have this
patch upstream.

CC: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Fixes: a1ddcbe930 ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi")
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-01-17 14:45:18 +01:00
Christoph Hellwig 4fac8076df ia64: clean up swiotlb support
Move the few remaining bits of swiotlb glue towards their callers,
and remove the pointless on ia64 swiotlb variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
2018-01-15 09:35:53 +01:00
Robin Murphy 29a90b7089 iommu/vt-d: Fix scatterlist offset handling
The intel-iommu DMA ops fail to correctly handle scatterlists where
sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed
appropriately based on the page-aligned portion of the offset, but the
mapping is set up relative to sg->page, which means it fails to actually
cover the whole buffer (and in the worst case doesn't cover it at all):

    (sg->dma_address + sg->dma_len) ----+
    sg->dma_address ---------+          |
    iov_pfn------+           |          |
                 |           |          |
                 v           v          v
iova:   a        b        c        d        e        f
        |--------|--------|--------|--------|--------|
                          <...calculated....>
                 [_____mapped______]
pfn:    0        1        2        3        4        5
        |--------|--------|--------|--------|--------|
                 ^           ^          ^
                 |           |          |
    sg->page ----+           |          |
    sg->offset --------------+          |
    (sg->offset + sg->length) ----------+

As a result, the caller ends up overrunning the mapping into whatever
lies beyond, which usually goes badly:

[  429.645492] DMAR: DRHD: handling fault status reg 2
[  429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ...

Whilst this is a fairly rare occurrence, it can happen from the result
of intermediate scatterlist processing such as scatterwalk_ffwd() in the
crypto layer. Whilst that particular site could be fixed up, it still
seems worthwhile to bring intel-iommu in line with other DMA API
implementations in handling this robustly.

To that end, fix the intel_map_sg() path to line up the mapping
correctly (in units of MM pages rather than VT-d pages to match the
aligned_nrpages() calculation) regardless of the offset, and use
sg_phys() consistently for clarity.

Reported-by: Harsh Jain <Harsh@chelsio.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed by: Ashok Raj <ashok.raj@intel.com>
Tested by: Jacob Pan <jacob.jun.pan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-11-17 10:28:58 -07:00
Joerg Roedel a593472591 Merge branches 'iommu/fixes', 'arm/omap', 'arm/exynos', 'x86/amd', 'x86/vt-d' and 'core' into next 2017-10-13 17:32:24 +02:00
Tomasz Nowicki 538d5b3332 iommu/iova: Make rcache flush optional on IOVA allocation failure
Since IOVA allocation failure is not unusual case we need to flush
CPUs' rcache in hope we will succeed in next round.

However, it is useful to decide whether we need rcache flush step because
of two reasons:
- Not scalability. On large system with ~100 CPUs iterating and flushing
  rcache for each CPU becomes serious bottleneck so we may want to defer it.
- free_cpu_cached_iovas() does not care about max PFN we are interested in.
  Thus we may flush our rcaches and still get no new IOVA like in the
  commonly used scenario:

    if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev))
        iova = alloc_iova_fast(iovad, iova_len, DMA_BIT_MASK(32) >> shift);

    if (!iova)
        iova = alloc_iova_fast(iovad, iova_len, dma_limit >> shift);

   1. First alloc_iova_fast() call is limited to DMA_BIT_MASK(32) to get
      PCI devices a SAC address
   2. alloc_iova() fails due to full 32-bit space
   3. rcaches contain PFNs out of 32-bit space so free_cpu_cached_iovas()
      throws entries away for nothing and alloc_iova() fails again
   4. Next alloc_iova_fast() call cannot take advantage of rcache since we
      have just defeated caches. In this case we pick the slowest option
      to proceed.

This patch reworks flushed_rcache local flag to be additional function
argument instead and control rcache flush step. Also, it updates all users
to do the flush as the last chance.

Signed-off-by: Tomasz Nowicki <Tomasz.Nowicki@caviumnetworks.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-12 14:18:02 +02:00
Christos Gkekas b117e03805 iommu/vt-d: Delete unnecessary check in domain_context_mapping_one()
Variable did_old is unsigned so checking whether it is
greater or equal to zero is not necessary.

Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-10 14:09:50 +02:00
Joerg Roedel ec154bf56b iommu/vt-d: Don't register bus-notifier under dmar_global_lock
The notifier function will take the dmar_global_lock too, so
lockdep complains about inverse locking order when the
notifier is registered under the dmar_global_lock.

Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 59ce0515cd ('iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-06 15:09:30 +02:00