Граф коммитов

1171 Коммитов

Автор SHA1 Сообщение Дата
Steven Whitehouse 8339ee543e GFS2: Make resource groups "append only" during life of fs
Since we have ruled out supporting online filesystem shrink,
it is possible to make the resource group list append only
during the life of a super block. This gives several benefits:

Firstly, we only need to read new rindex elements as they are added
rather than needing to reread the whole rindex file each time one
element is added.

Secondly, the rindex glock can be held for much shorter periods of
time, and is completely removed from the fast path for allocations.
The lock is taken in shared mode only when updating the resource
groups when the first allocation occurs, and after a grow has
taken place.

Thirdly, this results in a reduction in code size, and everything
gets a lot simpler to understand in this area.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:33 +01:00
Bob Peterson 7c9ca62113 GFS2: Use rbtree for resource groups and clean up bitmap buffer ref count scheme
Here is an update of Bob's original rbtree patch which, in addition, also
resolves the rather strange ref counting that was being done relating to
the bitmap blocks.

Originally we had a dual system for journaling resource groups. The metadata
blocks were journaled and also the rgrp itself was added to a list. The reason
for adding the rgrp to the list in the journal was so that the "repolish
clones" code could be run to update the free space, and potentially send any
discard requests when the log was flushed. This was done by comparing the
"cloned" bitmap with what had been written back on disk during the transaction
commit.

Due to this, there was a requirement to hang on to the rgrps' bitmap buffers
until the journal had been flushed. For that reason, there was a rather
complicated set up in the ->go_lock ->go_unlock functions for rgrps involving
both a mutex and a spinlock (the ->sd_rindex_spin) to maintain a reference
count on the buffers.

However, the journal maintains a reference count on the buffers anyway, since
they are being journaled as metadata buffers. So by moving the code which deals
with the post-journal accounting for bitmap blocks to the metadata journaling
code, we can entirely dispense with the rather strange buffer ref counting
scheme and also the requirement to journal the rgrps.

The net result of all this is that the ->sd_rindex_spin is left to do exactly
one job, and that is to look after the rbtree or rgrps.

This patch is designed to be a stepping stone towards using RCU for the rbtree
of resource groups, however the reduction in the number of uses of the
->sd_rindex_spin is likely to have benefits for multi-threaded workloads,
anyway.

The patch retains ->go_lock and ->go_unlock for rgrps, however these maybe also
be removed in future in favour of calling the functions directly where required
in the code. That will allow locking of resource groups without needing to
actually read them in - something that could be useful in speeding up statfs.

In the mean time though it is valid to dereference ->bi_bh only when the rgrp
is locked. This is basically the same rule as before, modulo the references not
being valid until the following journal flush.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: Benjamin Marzinski <bmarzins@redhat.com>
2011-10-21 12:39:31 +01:00
Steven Whitehouse 9453615a1a GFS2: Fix lseek after SEEK_DATA, SEEK_HOLE have been added
We need to take the inode's glock whenever the inode's size
is referenced, otherwise it might not be uptodate. Even
though generic_file_llseek_unlocked() doesn't implement
SEEK_DATA, SEEK_HOLE directly, it does reference the inode's
size in those cases, so we need to add them to the list
of origins which need the glock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
2011-10-21 12:39:29 +01:00
Steven Whitehouse 9a63edd12b GFS2: Clean up gfs2_create
If we pass through knowledge of whether the creation is intended to be
exclusive or not, then we can deal with that in gfs2_create_inode
and remove one set of locking. Also this removes the loop in
gfs2_create and simplifies the code a bit.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:28 +01:00
Steven Whitehouse ab9bbda020 GFS2: Use ->dirty_inode()
The aim of this patch is to use the newly enhanced ->dirty_inode()
super block operation to deal with atime updates, rather than
piggy backing that code into ->write_inode() as is currently
done.

The net result is a simplification of the code in various places
and a reduction of the number of gfs2_dinode_out() calls since
this is now implied by ->dirty_inode().

Some of the mark_inode_dirty() calls have been moved under glocks
in order to take advantage of then being able to avoid locking in
->dirty_inode() when we already have suitable locks.

One consequence is that generic_write_end() now correctly deals
with file size updates, so that we do not need a separate check
for that afterwards. This also, indirectly, means that fdatasync
should work correctly on GFS2 - the current code always syncs the
metadata whether it needs to or not.

Has survived testing with postmark (with and without atime) and
also fsx.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:26 +01:00
Steven Whitehouse f18185291d GFS2: Fix bug trap and journaled data fsync
Journaled data requires that a complete flush of all dirty data for
the file is done, in order that the ail flush which comes after
will succeed.

Also the recently enhanced bug trap can trigger falsely in case
an ail flush from fsync races with a page read. This updates the
bug trap such that it will ignore buffers which are locked and
only trigger on dirty and/or pinned buffers when the ail flush
is run from fsync. The original bug trap is retained when ail
flush is run from ->go_sync()

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:25 +01:00
Steven Whitehouse 40ac218f52 GFS2: Fix inode allocation error path
If we have got far enough through the inode allocation code
path that an inode has already been allocated, then we must
call iput to dispose of it, if an error occurs during a
later part of the process. This will always be the final iput
since there will be no other references to the inode.

Unlike when the inode has been unlinked, its block state will
be GFS2_BLKST_INODE rather than GFS2_BLKST_UNLINKED so we need
to skip the test in ->evict_inode() for this one case in order
to ensure that it will be deallocated correctly. This patch adds
a new flag in order to ensure that this will happen correctly.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:23 +01:00
Steven Whitehouse 1d4ec642d9 GFS2: Make atime checks more efficient
We do not need to start a transaction unless the atime
check has proved positive. Also if we are going to flush
the complete ail list anyway, we might as well skip the
writeback for this specific inode's metadata, since that
will be done as part of the ail writeback process in an
order offering potentially more efficient I/O.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:21 +01:00
Steven Whitehouse 75549186ed GFS2: Fix bug-trap in ail flush code
The assert was being tested under the wrong lock, a
legacy of the original code. Also, if it does trigger,
the resulting information was not always a lot of help.

This moves the patch under the correct lock and also
prints out more useful information in tacking down the
source of the problem.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:20 +01:00
Steven Whitehouse 2f0264d592 GFS2: Split data write & wait in fsync
Now that the data writing is part of fsync proper, we can split
the waiting part out and do it later on. This reduces the
number of waits that we do during fsync on average.

There is also no need to take the i_mutex unless we are flushing
metadata to disk, so we can move that to within the metadata
flushing code.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:18 +01:00
Steven Whitehouse 4c28d33803 GFS2: Clean up dir hash table reading
Since there is now only a single caller to gfs2_dir_read_data()
and it has a number of constant arguments, we can factor
those out. Also some tests relating to the inode size were
being done twice.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-10-21 12:39:17 +01:00
Christoph Hellwig 65299a3b78 block: separate priority boosting from REQ_META
Add a new REQ_PRIO to let requests preempt others in the cfq I/O schedule,
and lave REQ_META purely for marking requests as metadata in blktrace.

All existing callers of REQ_META except for XFS are updated to also
set REQ_PRIO for now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 14:50:29 +02:00
Christoph Hellwig 5dc06c5a70 block: remove READ_META and WRITE_META
Replace all occurnanced of the undocumented READ_META with READ | REQ_META
and remove the unused WRITE_META define.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23 14:49:55 +02:00
James Morris 5a2f3a02ae Merge branch 'next-evm' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/ima-2.6 into next
Conflicts:
	fs/attr.c

Resolve conflict manually.

Signed-off-by: James Morris <jmorris@namei.org>
2011-08-09 10:31:03 +10:00
Linus Torvalds 1b8e94993c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
  VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock
  VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree()
  VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree()
  switch posix_acl_chmod() to umode_t
  switch posix_acl_from_mode() to umode_t
  switch posix_acl_equiv_mode() to umode_t *
  switch posix_acl_create() to umode_t *
  block: initialise bd_super in bdget()
  vfs: avoid call to inode_lru_list_del() if possible
  vfs: avoid taking inode_hash_lock on pipes and sockets
  vfs: conditionally call inode_wb_list_del()
  VFS: Fix automount for negative autofs dentries
  Btrfs: load the key from the dir item in readdir into a fake dentry
  devtmpfs: missing initialialization in never-hit case
  hppfs: missing include
2011-08-01 13:48:31 -10:00
Al Viro d6952123b5 switch posix_acl_equiv_mode() to umode_t *
... so that &inode->i_mode could be passed to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-01 02:10:06 -04:00
Al Viro d3fb612076 switch posix_acl_create() to umode_t *
so we can pass &inode->i_mode to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-01 02:09:42 -04:00
Linus Torvalds 333c066bb7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Fix mount hang caused by certain access pattern to sysfs files
2011-07-27 09:26:22 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Steven Whitehouse 1923703991 GFS2: Fix mount hang caused by certain access pattern to sysfs files
Depending upon the order of userspace/kernel during the
mount process, this can result in a hang without the
_all version of the completion.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-26 10:18:37 +01:00
Christoph Hellwig 4e34e719e4 fs: take the ACL checks to common code
Replace the ->check_acl method with a ->get_acl method that simply reads an
ACL from disk after having a cache miss.  This means we can replace the ACL
checking boilerplate code with a single implementation in namei.c.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:30:23 -04:00
Al Viro 826cae2f2b kill boilerplates around posix_acl_create_masq()
new helper: posix_acl_create(&acl, gfp, mode_p).  Replaces acl with
modified clone, on failure releases acl and replaces with NULL.
Returns 0 or -ve on error.  All callers of posix_acl_create_masq()
switched.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:27:32 -04:00
Al Viro bc26ab5f65 kill boilerplate around posix_acl_chmod_masq()
new helper: posix_acl_chmod(&acl, gfp, mode).  Replaces acl with modified
clone or with NULL if that has failed; returns 0 or -ve on error.  All
callers of posix_acl_chmod_masq() switched to that - they'd been doing
exactly the same thing.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:27:30 -04:00
Linus Torvalds e77819e57f vfs: move ACL cache lookup into generic code
This moves logic for checking the cached ACL values from low-level
filesystems into generic code.  The end result is a streamlined ACL
check that doesn't need to load the inode->i_op->check_acl pointer at
all for the common cached case.

The filesystems also don't need to check for a non-blocking RCU walk
case in their acl_check() functions, because that is all handled at a
VFS layer.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-25 14:23:39 -04:00
Linus Torvalds bbd9d6f7fb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
2011-07-22 19:02:39 -07:00
Al Viro 6c673ab393 simplify gfs2_lookup()
d_splice_alias() will DTRT when given NULL or ERR_PTR

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:48:02 -04:00
Josef Bacik 02c24a8218 fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:59 -04:00
Christoph Hellwig 562c72aa57 fs: move inode_dio_wait calls into ->setattr
Let filesystems handle waiting for direct I/O requests themselves instead
of doing it beforehand.  This means filesystem-specific locks to prevent
new dio referenes from appearing can be held.  This is important to allow
generalizing i_dio_count to non-DIO_LOCKING filesystems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 20:47:47 -04:00
Al Viro 10556cb21a ->permission() sanitizing: don't pass flags to ->permission()
not used by the instances anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:24 -04:00
Al Viro 2830ba7f34 ->permission() sanitizing: don't pass flags to generic_permission()
redundant; all callers get it duplicated in mask & MAY_NOT_BLOCK and none of
them removes that bit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:22 -04:00
Al Viro 7e40145eb1 ->permission() sanitizing: don't pass flags to ->check_acl()
not used in the instances anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:21 -04:00
Al Viro 9c2c703929 ->permission() sanitizing: pass MAY_NOT_BLOCK to ->check_acl()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:19 -04:00
Al Viro 178ea73521 kill check_acl callback of generic_permission()
its value depends only on inode and does not change; we might as
well store it in ->i_op->check_acl and be done with that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20 01:43:16 -04:00
Mimi Zohar 9d8f13ba3f security: new security_inode_init_security API adds function callback
This patch changes the security_inode_init_security API by adding a
filesystem specific callback to write security extended attributes.
This change is in preparation for supporting the initialization of
multiple LSM xattrs and the EVM xattr.  Initially the callback function
walks an array of xattrs, writing each xattr separately, but could be
optimized to write multiple xattrs at once.

For existing security_inode_init_security() calls, which have not yet
been converted to use the new callback function, such as those in
reiserfs and ocfs2, this patch defines security_old_inode_init_security().

Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
2011-07-18 12:29:38 -04:00
Eric Sandeen 46fcb2ed29 GFS2: combine duplicated block freeing routines
__gfs2_free_data and __gfs2_free_meta are almost identical, and
can be trivially combined.

[This is as per Eric's original patch minus gfs2_free_data() which had
 no callers left and plus the conversion of the bmap.c calls to these
 functions. All in all, a nice clean up]

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-15 09:32:52 +01:00
Steven Whitehouse 9964afbb79 GFS2: Add S_NOSEC support
This adds S_NOSEC support to GFS2. We set/reset the flag either when
a user calls setattr or when we have just regained the glock
from another node. The flag is only set if there are no xattrs
on the inode and there is no suid bit set.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
2011-07-15 09:32:35 +01:00
Bob Peterson 7cf8dcd3b6 GFS2: Automatically adjust glock min hold time
This patch is a performance improvement for GFS2 in a clustered
environment. It makes the glock hold time self-adjusting.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-15 09:32:11 +01:00
Steven Whitehouse 17d539f049 GFS2: Cache dir hash table in a contiguous buffer
This patch adds a cache for the hash table to the directory code
in order to help simplify the way in which the hash table is
accessed. This is intended to be a first step towards introducing
some performance improvements in the directory code.

There are two follow ups that I'm hoping to see fairly shortly. One
is to simplify the hash table reading code now that we always read the
complete hash table, whether we want one entry or all of them. The
other is to introduce readahead on the heads of the hash chains
which are referred to from the table.

The hash table is a maximum of 128k in size, so it is not worth trying
to read it in small chunks.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-15 09:31:48 +01:00
Steven Whitehouse 380f7c65a7 GFS2: Resolve inode eviction and ail list interaction bug
This patch contains a few misc fixes which resolve a recently
reported issue. This patch has been a real team effort and has
received a lot of testing.

The first issue is that the ail lock needs to be held over a few
more operations. The lock thats added into gfs2_releasepage() may
possibly be a candidate for replacing with RCU at some future
point, but at this stage we've gone for the obvious fix.

The second issue is that gfs2_write_inode() can end up calling
a glock recursively when called from gfs2_evict_inode() via the
syncing code, so it needs a guard added.

The third issue is that we either need to not truncate the metadata
pages of inodes which have zero link count, but which we cannot
deallocate due to them still being in use by other nodes, or we need
to ensure that those pages have all made it through the journal and
ail lists first. This patch takes the former approach, but the
latter has also been tested and there is nothing to choose between
them performance-wise. So again, we could revise that decision
in the future.

Also, the inode eviction process is now better documented.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Reported-by: Barry J. Marson <bmarson@redhat.com>
Reported-by: David Teigland <teigland@redhat.com>
2011-07-14 08:59:44 +01:00
Steven Whitehouse 3942ae5319 GFS2: Fix race during filesystem mount
There is a potential race during filesystem mounting which has recently
been reported. It occurs when the userland gfs_controld is able to
process requests fast enough that it tries to use the sysfs interface
before the lock module is properly initialised. This is a pretty
unusual case as normally the lock module initialisation is very quick
compared with gfs_controld.

This patch adds an interruptible completion which is used to ensure that
userland will wait for the initialisation of the lock module to
complete.

There are other potential solutions to this problem, but this is the
quickest at this stage and has been tested both with and without
mount.gfs2 present in the system.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: David Booher <dbooher@adams.net>
2011-07-12 09:15:46 +01:00
Benjamin Marzinski 1ce533686c GFS2: force a log flush when invalidating the rindex glock
Right now, there is nothing that forces the log to get flushed when a node
drops its rindex glock so that another node can grow the filesystem. If the
log doesn't get flushed, GFS2 can corrupt the sd_log_le_rg list in the
following way.

A node puts an rgd on the list in rg_lo_add(), and then the rindex glock is
dropped so the other node can grow the filesystem. When the node reacquires the
rindex glock, that rgd gets deleted in clear_rgrpdi() before ever being
removed from the list by gfs2_log_flush().

This code simply forces a log flush when the rindex glock is invalidated,
solving the problem.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-07-12 09:15:24 +01:00
Linus Torvalds d205df9955 Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Processes waiting on inode glock that no processes are holding
2011-06-07 18:44:10 -07:00
Linus Torvalds b7c2f03628 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  gfs2: Drop __TIME__ usage
  isdn/diva: Drop __TIME__ usage
  atm: Drop __TIME__ usage
  dlm: Drop __TIME__ usage
  wan/pc300: Drop __TIME__ usage
  parport: Drop __TIME__ usage
  hdlcdrv: Drop __TIME__ usage
  baycom: Drop __TIME__ usage
  pmcraid: Drop __DATE__ usage
  edac: Drop __DATE__ usage
  rio: Drop __DATE__ usage
  scsi/wd33c93: Drop __TIME__ usage
  scsi/in2000: Drop __TIME__ usage
  aacraid: Drop __TIME__ usage
  media/cx231xx: Drop __TIME__ usage
  media/radio-maxiradio: Drop __TIME__ usage
  nozomi: Drop __TIME__ usage
  cyclades: Drop __TIME__ usage
2011-05-26 13:19:00 -07:00
Michal Marek 8d2c50e3b6 gfs2: Drop __TIME__ usage
The kernel already prints its build timestamp during boot, no need to
repeat it in random drivers and produce different object files each
time.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-26 10:54:37 +02:00
Ying Han 1495f230fa vmscan: change shrinker API by passing shrink_control struct
Change each shrinker's API by consolidating the existing parameters into
shrink_control struct.  This will simplify any further features added w/o
touching each file of shrinker.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: fix warning]
[kosaki.motohiro@jp.fujitsu.com: fix up new shrinker API]
[akpm@linux-foundation.org: fix xfs warning]
[akpm@linux-foundation.org: update gfs2]
Signed-off-by: Ying Han <yinghan@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25 08:39:26 -07:00
Bob Peterson f90e5b5b13 GFS2: Processes waiting on inode glock that no processes are holding
This patch fixes a race in the GFS2 glock state machine that may
result in lockups.  The symptom is that all nodes but one will
hang, waiting for a particular glock.  All the holder records
will have the "W" (Waiting) bit set.  The other node will
typically have the glock stuck in Exclusive mode (EX) with no
holder records, but the dinode will be cached.  In other words,
an entry with "I:" will appear in the glock dump for that glock,
but nothing else.

The race has to do with the glock "Pending Demote" bit, which
can be set, then immediately reset, thus losing the fact that
another node needs the glock.  The sequence of events is:

1. Something schedules the glock workqueue (e.g. glock request from fs)
2. The glock workqueue gets to the point between the test of the reply pending
bit and the spin lock:

        if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) {
                finish_xmote(gl, gl->gl_reply);
                drop_ref = 1;
        }
        down_read(&gfs2_umount_flush_sem);         <---- i.e. here
        spin_lock(&gl->gl_spin);

3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and
            (b) the demote request which sets GLF_PENDING_DEMOTE

4. The following test is executed:

        if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
            gl->gl_state != LM_ST_UNLOCKED &&
            gl->gl_demote_state != LM_ST_EXCLUSIVE) {

This resets the pending demote flag, and gl->gl_demote_state is not equal to
exclusive, however because the reply from the dlm arrived after we checked for
the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so
although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the
GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG.

The patch closes the timing window by only transitioning the
"Pending demote" bit to the "demote" flag once we know the
other conditions (not unlocked and not exclusive) are met.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-25 10:37:11 +01:00
Steven Whitehouse 26b06a6958 GFS2: Wait properly when flushing the ail list
The ail flush code has always relied upon log flushing to prevent
it from spinning needlessly. This fixes it to wait on the last
I/O request submitted (we don't need to wait for all of it)
instead of either spinning with io_schedule or sleeping.

As a result cpu usage of gfs2_logd is much reduced with certain
workloads.

Reported-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 19:21:07 +01:00
Steven Whitehouse 6d3117b412 GFS2: Wipe directory hash table metadata when deallocating a directory
The deallocation code for directories in GFS2 is largely divided into
two parts. The first part deallocates any directory leaf blocks and
marks the directory as being a regular file when that is complete. The
second stage was identical to deallocating regular files.

Regular files have their data blocks in a different
address space to directories, and thus what would have been normal data
blocks in a regular file (the hash table in a GFS2 directory) were
deallocated correctly. However, a reference to these blocks was left in the
journal (assuming of course that some previous activity had resulted in
those blocks being in the journal or ail list).

This patch uses the i_depth as a test of whether the inode is an
exhash directory (we cannot test the inode type as that has already
been changed to a regular file at this stage in deallocation)

The original issue was reported by Chris Hertel as an issue he encountered
running bonnie++

Reported-by: Christopher R. Hertel <crh@samba.org>
Cc: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-21 14:05:58 +01:00
Linus Torvalds 6c1b8d94bc Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (32 commits)
  GFS2: Move all locking inside the inode creation function
  GFS2: Clean up symlink creation
  GFS2: Clean up mkdir
  GFS2: Use UUID field in generic superblock
  GFS2: Rename ops_inode.c to inode.c
  GFS2: Inode.c is empty now, remove it
  GFS2: Move final part of inode.c into super.c
  GFS2: Move most of the remaining inode.c into ops_inode.c
  GFS2: Move gfs2_refresh_inode() and friends into glops.c
  GFS2: Remove gfs2_dinode_print() function
  GFS2: When adding a new dir entry, inc link count if it is a subdir
  GFS2: Make gfs2_dir_del update link count when required
  GFS2: Don't use gfs2_change_nlink in link syscall
  GFS2: Don't use a try lock when promoting to a higher mode
  GFS2: Double check link count under glock
  GFS2: Improve bug trap code in ->releasepage()
  GFS2: Fix ail list traversal
  GFS2: make sure fallocate bytes is a multiple of blksize
  GFS2: Add an AIL writeback tracepoint
  GFS2: Make writeback more responsive to system conditions
  ...
2011-05-20 13:28:45 -07:00
Steven Whitehouse f2741d9898 GFS2: Move all locking inside the inode creation function
Now that there are no longer any exceptions to the normal inode
creation code path, we can move the parts of the locking code
which were duplicated in mkdir/mknod/create/symlink into the
inode create function.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-13 12:11:17 +01:00
Steven Whitehouse 160b4026dc GFS2: Clean up symlink creation
This moves the symlink specific parts of inode creation
into the function where we initialise the rest of the
dinode. As a result we have one less place where we need
to look up the inode's buffer.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-13 10:34:59 +01:00
Steven Whitehouse e2d0a13bba GFS2: Clean up mkdir
This moves the initialisation of the directory into the inode
creation functions to avoid having to duplicate the lookup
of the inode's buffer.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-13 09:55:55 +01:00
Steven Whitehouse 32e471ef10 GFS2: Use UUID field in generic superblock
The VFS superblock structure now has a UUID field, so we can use that
in preference to the UUID field in the GFS2 superblock now.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-10 15:01:59 +01:00
Steven Whitehouse 2ab9cd1c63 GFS2: Rename ops_inode.c to inode.c
This is the final part of the ops_inode.c/inode.c reordering. We
are left with a single file called inode.c which now contains
all the inode operations, as expected.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-10 13:12:49 +01:00
Steven Whitehouse 64ea540258 GFS2: Inode.c is empty now, remove it
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-10 13:09:53 +01:00
Steven Whitehouse 9eed04cd99 GFS2: Move final part of inode.c into super.c
Now inode.c is empty.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:45:38 +01:00
Steven Whitehouse 194c011fc4 GFS2: Move most of the remaining inode.c into ops_inode.c
This is in preparation to remove inode.c and rename ops_inode.c
to inode.c. Also most of the functions which were left in inode.c
relate to the creation and lookup of inodes. I'm intending to work
on consolidating some of that code, and its easier when its all in
one place.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:45:14 +01:00
Steven Whitehouse d4b2cf1b05 GFS2: Move gfs2_refresh_inode() and friends into glops.c
Eventually there will only be a single caller of this code, so lets
move it where it can be made static at some future date.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:44:49 +01:00
Steven Whitehouse 94fb763b1a GFS2: Remove gfs2_dinode_print() function
This function was intended for debugging purposes, but it is not very
useful. If we want to know what is on disk then all we need is a
block number and gfs2_edit can give us much better information about
what is there. Otherwise, if we are interested in what is stored in
the in-core inode, it doesn't help us out there either.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:44:29 +01:00
Steven Whitehouse 3d6ecb7d16 GFS2: When adding a new dir entry, inc link count if it is a subdir
This adds an increment of the link count when we add a new directory
entry, if that entry is itself a directory. This means that we no
longer need separate code to perform this operation.

Now that both adding and removing directory entries automatically
update the parent directory's link count if required, that makes
the code shorter and simpler than before.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:43:53 +01:00
Steven Whitehouse 855d23ce26 GFS2: Make gfs2_dir_del update link count when required
When we remove an entry from a directory, we can save ourselves
some trouble if we know the type of the entry in question, since
if it is itself a directory, we can update the link count of the
parent at the same time as removing the directory entry.

In addition this patch also merges the rmdir and unlink code which
was almost identical anyway. This eliminates the calls to remove
the . and .. directory entries on each rmdir (not needed since the
directory will be deallocated, anyway) which was the only thing preventing
passing the dentry to gfs2_dir_del(). The passing of the dentry
rather than just the name allows us to figure out the type of the entry
which is being removed, and thus adjust the link count when required.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:42:37 +01:00
Steven Whitehouse 2baee03fb9 GFS2: Don't use gfs2_change_nlink in link syscall
There are three users of gfs2_change_nlink which add to the link
count. Two of these are about to be removed in later patches, so
this means that there will no callers, when that happens allowing
removal of that function, also in a later patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-09 16:35:25 +01:00
Steven Whitehouse 588da3b3be GFS2: Don't use a try lock when promoting to a higher mode
Previously we marked all locks being promoted to a higher mode
with the try flag to avoid any potential deadlocks issues. The
DLM is able to detect these and report them in way that GFS2 can
deal with them correctly. So we can just request the required mode
and wait for a response without needing to perform this check.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-05 12:36:38 +01:00
Steven Whitehouse d192a8e5c6 GFS2: Double check link count under glock
To avoid any possible races relating to the link count, we need to
recheck it under the inode's glock in all cases where it matters.
Also to ensure we never get any nasty surprises, this patch also
ensures that once the link count has hit zero it can never be
elevated by rereading in data from disk.

The only place we cannot provide a proper solution is in rename
in the case where we are removing a target inode and we discover
that the target inode has been already unlinked on another node.
The race window is very small, and we return EAGAIN in this case
to indicate what has happened. The proper solution would be to move
the lookup parts of rename from the vfs into library calls which
the fs could call directly, but that is potentially a very big job
and this fix should cover most cases for now.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-05 12:35:40 +01:00
Steven Whitehouse 8f065d3650 GFS2: Improve bug trap code in ->releasepage()
If the buffer is dirty or pinned, then as well as printing a
warning, we should also refuse to release the page in
question.

Currently this can occur if there is a race between mmap()ed
writers and O_DIRECT on the same file. With the addition of
->launder_page() in the future, we should be able to close
this gap.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-03 11:49:19 +01:00
Steven Whitehouse 4f1de01821 GFS2: Fix ail list traversal
In the recent patches to update the AIL list code, I managed to
forget that the ail list lock got dropped, even though I
added a comment specifically to remind myself :(

Reported-by: Barry Marson <bmarson@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-03 11:48:07 +01:00
Benjamin Marzinski 6905d9e4dd GFS2: make sure fallocate bytes is a multiple of blksize
The GFS2 fallocate code chooses a target size to for allocating chunks of
space.  Whenever it can't find any resource groups with enough space free, it
halves its target. Since this target is in bytes, eventually it will no longer
be a multiple of blksize.  As long as there is more space available in the
resource group than the target, this isn't a problem, since gfs2 will use the
actual space available, which is always a multiple of blksize.  However,
when gfs couldn't fallocate a bigger chunk than the target, it was using the
non-blksize aligned number. This caused a BUG in later code that required
blksize aligned offsets.  GFS2 now ensures that bytes is always a multiple of
blksize

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-05-03 11:47:42 +01:00
Christoph Hellwig 1879fd6a26 add hlist_bl_lock/unlock helpers
Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets.  Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-25 18:14:10 -07:00
Steven Whitehouse c83ae9cad8 GFS2: Add an AIL writeback tracepoint
Add a tracepoint for monitoring writeback of the AIL.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:01:58 +01:00
Steven Whitehouse 4667a0ec32 GFS2: Make writeback more responsive to system conditions
This patch adds writeback_control to writing back the AIL
list. This means that we can then take advantage of the
information we get in ->write_inode() in order to set off
some pre-emptive writeback.

In addition, the AIL code is cleaned up a bit to make it
a bit simpler to understand.

There is still more which can usefully be done in this area,
but this is a good start at least.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:01:37 +01:00
Steven Whitehouse f42ab08529 GFS2: Optimise glock lru and end of life inodes
The GLF_LRU flag introduced in the previous patch can be
used to check if a glock is on the lru list when a new
holder is queued and if so remove it, without having first
to get the lru_lock.

The main purpose of this patch however is to optimise the
glocks left over when an inode at end of life is being
evicted. Previously such glocks were left with the GLF_LFLUSH
flag set, so that when reclaimed, each one required a log flush.
This patch resets the GLF_LFLUSH flag when there is nothing
left to flush thus preventing later log flushes as glocks are
reused or demoted.

In order to do this, we need to keep track of the number of
revokes which are outstanding, and also to clear the GLF_LFLUSH
bit after a log commit when only revokes have been processed.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:01:17 +01:00
Steven Whitehouse 627c10b7e4 GFS2: Improve tracing support (adds two flags)
This adds support for two new flags. One keeps track of whether
the glock is on the LRU list or not. The other isn't really a
flag as such, but an indication of whether the glock has an
attached object or not. This indication is reported without
any locking, which is ok since we do not dereference the object
pointer but merely report whether it is NULL or not.

Also, this fixes one place where a tracepoint was missing, which
was at the point we remove deallocated blocks from the journal.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:00:59 +01:00
Steven Whitehouse dba898b02d GFS2: Clean up fsync()
This patch is designed to clean up GFS2's fsync
implementation and ensure that it really does get everything on
disk. Since ->write_inode() has been updated, we can call that
via the vfs library function sync_inode_metadata() and the only
remaining thing that has to be done is to ensure that we get
any revoke records in the log after the inode has been written back.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:00:41 +01:00
Steven Whitehouse efc1a9c2a7 GFS2: Remove unused macro
The buffer_in_io() macro has been unused for some time,
so remove it.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 09:00:24 +01:00
Steven Whitehouse 29687a2ac8 GFS2: Alter point of entry to glock lru list for glocks with an address_space
Rather than allowing the glocks to be scheduled for possible
reclaim as soon as they have exited the journal, this patch
delays their entry to the list until the glocks in question
are no longer in use.

This means that we will rely on the vm for writeback of all
dirty data and metadata from now on. When glocks are added
to the lru list they should be freeable much faster since all
the I/O required to free them should have already been completed.

This should lead to much better I/O patterns under low memory
conditions.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:59:48 +01:00
Steven Whitehouse 5ac048bb7e GFS2: Use filemap_fdatawrite() to write back the AIL
In order to ensure that the mapping stats (and thus the bdi) are correctly
updated, this patch changes the AIL writeback to use the filemap_datawrite
function. This helps prevent stalls in balance_dirty_pages() due to
large amounts of dirty metadata when there is little or no dirty data
around.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:59:25 +01:00
Steven Whitehouse 1027efaa23 GFS2: Make ->write_inode() really write
The GFS2 ->write_inode function should be more aggressive at writing
back to the filesystem. This adopts the XFS system of returning
-EAGAIN when the writeback has not been completely done. Also, we
now kick off in-place writeback when called with WB_SYNC_NONE,
but we only wait for it and flush the log when WB_SYNC_ALL is
requested.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:55:07 +01:00
Bob Peterson 556bb17998 GFS2: move function foreach_leaf to gfs2_dir_exhash_dealloc
The previous patches made function gfs2_dir_exhash_dealloc do nothing
but call function foreach_leaf.  This patch simplifies the code by
moving the entire function foreach_leaf into gfs2_dir_exhash_dealloc.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:54:44 +01:00
Bob Peterson ec038c826b GFS2: pass leaf_bh into leaf_dealloc
Function foreach_leaf used to look up the leaf block address and get
a buffer_head.  Then it would call leaf_dealloc which did the same
lookup.  This patch combines the two operations by making foreach_leaf
pass the leaf bh to leaf_dealloc.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:54:26 +01:00
Bob Peterson d24a7a439a GFS2: Combine transaction from gfs2_dir_exhash_dealloc
At the end of function gfs2_dir_exhash_dealloc, it was setting the dinode
type to "file" to prevent directory corruption in case of a crash.
It was doing so in its own journal transaction.  This patch makes the
change occur when the last call is make to leaf_dealloc, since it needs
to rewrite the directory dinode at that time anyway.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:53:56 +01:00
Bob Peterson 0d95326d9b GFS2: remove *leaf_call_t and simplify leaf_dealloc
Since foreach_leaf is only called with leaf_dealloc as its only possible
call function, we can simplify the code by making it call leaf_dealloc
directly.  This simplifies the code and eliminates the need for
leaf_call_t, the generic call method.  This is a first small step in
simplifying the directory leaf deallocation code.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:53:35 +01:00
Bob Peterson 95c8e17f2f GFS2: Dump better debug info if a bitmap inconsistency is detected
On rare occasions we encounter gfs2 problems where an
invalid bitmap state transition is attempted.  For example,
trying to "unlink" a free block.  In these cases, there
is really no useful information logged to debug the problem.
This patch adds more debug details that should allow us to
more closely examine the problem and possibly solve it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-20 08:53:12 +01:00
Bob Peterson 44ad37d69b GFS2: filesystem hang caused by incorrect lock order
This patch fixes a deadlock in GFS2 where two processes are trying
to reclaim an unlinked dinode:
One holds the inode glock and calls gfs2_lookup_by_inum trying to look
up the inode, which it can't, due to I_FREEING.  The other has set
I_FREEING from vfs and is at the beginning of gfs2_delete_inode
waiting for the glock, which is held by the first.  The solution is to
add a new non_block parameter to the gfs2_iget function that causes it
to return -ENOENT if the inode is being freed.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 15:23:50 +01:00
Steven Whitehouse 001e8e8df4 GFS2: Don't try to deallocate unlinked inodes when mounted ro
This adds a couple of missing tests to avoid read-only nodes
from attempting to deallocate unlinked inodes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Michel Andre de la Porte <madelaporte@ubi.com>
2011-04-18 15:23:12 +01:00
Benjamin Marzinski 0ee532062f GFS2: directly write blocks past i_size
GFS2 was relying on the writepage code to write out the zeroed data for
fallocate.  However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size.
If it is, it will be ignored.  To work around this, gfs2 now calls
write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE
is set, and it's writing past i_size.

This version is just a cleanup of my last version

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 15:22:52 +01:00
Bob Peterson deab72d379 GFS2: write_end error path fails to unlock transaction lock
I did an audit of gfs2's transaction glock for bugzilla bug
658619 and ran across this:

In function gfs2_write_end, in the unlikely event that
gfs2_meta_inode_buffer returns an error, the code may forget
to unlock the transaction lock because the "failed" label
appears after the call to function gfs2_trans_end.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-04-18 15:22:35 +01:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Linus Torvalds 6c51038900 Merge branch 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
  Documentation/iostats.txt: bit-size reference etc.
  cfq-iosched: removing unnecessary think time checking
  cfq-iosched: Don't clear queue stats when preempt.
  blk-throttle: Reset group slice when limits are changed
  blk-cgroup: Only give unaccounted_time under debug
  cfq-iosched: Don't set active queue in preempt
  block: fix non-atomic access to genhd inflight structures
  block: attempt to merge with existing requests on plug flush
  block: NULL dereference on error path in __blkdev_get()
  cfq-iosched: Don't update group weights when on service tree
  fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
  block: Require subsystems to explicitly allocate bio_set integrity mempool
  jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
  fs: make fsync_buffers_list() plug
  mm: make generic_writepages() use plugging
  blk-cgroup: Add unaccounted time to timeslice_used.
  block: fixup plugging stubs for !CONFIG_BLOCK
  block: remove obsolete comments for blkdev_issue_zeroout.
  blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
  ...

Fix up conflicts in fs/{aio.c,super.c}
2011-03-24 10:16:26 -07:00
Serge E. Hallyn 2e14967075 userns: rename is_owner_or_cap to inode_owner_or_capable
And give it a kernel-doc comment.

[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:13 -07:00
Linus Torvalds a44f99c7ef Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
  video: change to new flag variable
  scsi: change to new flag variable
  rtc: change to new flag variable
  rapidio: change to new flag variable
  pps: change to new flag variable
  net: change to new flag variable
  misc: change to new flag variable
  message: change to new flag variable
  memstick: change to new flag variable
  isdn: change to new flag variable
  ieee802154: change to new flag variable
  ide: change to new flag variable
  hwmon: change to new flag variable
  dma: change to new flag variable
  char: change to new flag variable
  fs: change to new flag variable
  xtensa: change to new flag variable
  um: change to new flag variables
  s390: change to new flag variable
  mips: change to new flag variable
  ...

Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-20 18:14:55 -07:00
matt mooney 0ccd234ca0 fs: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:02:57 +01:00
Linus Torvalds 0f6e0e8448 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
  AppArmor: kill unused macros in lsm.c
  AppArmor: cleanup generated files correctly
  KEYS: Add an iovec version of KEYCTL_INSTANTIATE
  KEYS: Add a new keyctl op to reject a key with a specified error code
  KEYS: Add a key type op to permit the key description to be vetted
  KEYS: Add an RCU payload dereference macro
  AppArmor: Cleanup make file to remove cruft and make it easier to read
  SELinux: implement the new sb_remount LSM hook
  LSM: Pass -o remount options to the LSM
  SELinux: Compute SID for the newly created socket
  SELinux: Socket retains creator role and MLS attribute
  SELinux: Auto-generate security_is_socket_class
  TOMOYO: Fix memory leak upon file open.
  Revert "selinux: simplify ioctl checking"
  selinux: drop unused packet flow permissions
  selinux: Fix packet forwarding checks on postrouting
  selinux: Fix wrong checks for selinux_policycap_netpeer
  selinux: Fix check for xfrm selinux context algorithm
  ima: remove unnecessary call to ima_must_measure
  IMA: remove IMA imbalance checking
  ...
2011-03-16 09:15:43 -07:00
Linus Torvalds 3ae2a1ce2e Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Don't use _raw version of RCU dereference
  GFS2: Adding missing unlock_page()
  GFS2: Update to AIL list locking
  GFS2: introduce AIL lock
  GFS2: fix block allocation check for fallocate
  GFS2: Optimize glock multiple-dequeue code
  GFS2: Remove potential race in flock code
  GFS2: Fix glock deallocation race
  GFS2: quota allows exceeding hard limit
  GFS2: deallocation performance patch
  GFS2: panics on quotacheck update
  GFS2: Improve cluster mmap scalability
  GFS2: Fix glock queue trace point
  GFS2: Post-VFS scale update for RCU path walk
  GFS2: Use RCU for glock hash table
2011-03-16 08:58:43 -07:00
James Morris a002951c97 Merge branch 'next' into for-linus 2011-03-16 09:41:17 +11:00
Steven Whitehouse 7e32d02613 GFS2: Don't use _raw version of RCU dereference
As per RCU glock patch review comments, don't use the _raw
version of this function here.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-03-15 08:58:17 +00:00
Maxim 6c474f7bc1 GFS2: Adding missing unlock_page()
gfs2_write_begin() calls grab_cache_page_write_begin() that returns *locked*
page. Correspondent error-handling path lacks for unlock_page() call:

> out:
> 	if (error == 0)
> 		return 0;
>
> 	page_cache_release(page);

The whole system hangs if gfs2_unstuff_dinode() called from gfs2_write_begin()
failed for some reason.

Reported-by: Maxim <maxim.patlasov@gmail.com>
Signed-off-by: Maxim <maxim.patlasov@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-14 13:19:21 +00:00
Aneesh Kumar K.V 5fe0c23788 exportfs: Return the minimum required handle size
The exportfs encode handle function should return the minimum required
handle size. This helps user to find out the handle size by passing 0
handle size in the first step and then redoing to the call again with
the returned handle size value.

Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-03-14 09:15:28 -04:00
Steven Whitehouse c618e87a5f GFS2: Update to AIL list locking
The previous patch missed a couple of places where the AIL list
needed locking, so this fixes up those places, plus a comment
is corrected too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
2011-03-14 12:40:29 +00:00
Dave Chinner d6a079e82e GFS2: introduce AIL lock
The log lock is currently used to protect the AIL lists and
the movements of buffers into and out of them. The lists
are self contained and no log specific items outside the
lists are accessed when starting or emptying the AIL lists.

Hence the operation of the AIL does not require the protection
of the log lock so split them out into a new AIL specific lock
to reduce the amount of traffic on the log lock. This will
also reduce the amount of serialisation that occurs when
the gfs2_logd pushes on the AIL to move it forward.

This reduces the impact of log pushing on sequential write
throughput.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 11:52:25 +00:00
Benjamin Marzinski e4a7b7b0c9 GFS2: fix block allocation check for fallocate
GFS2 fallocate wasn't properly checking if a blocks were already allocated.
In write_empty_blocks(), if a page didn't have buffer_heads attached, GFS2
was always treating it as if there were no blocks allocated for that page.
GFS2 now calls gfs2_block_map() to check if the blocks are allocated before
writing them out.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2011-03-11 09:26:48 +00:00