Currently, ccw, vop and remoteproc need some legacy virtio
APIs to create or access virtio rings, which are not supported
by packed ring. So disable packed ring on these transports
for now.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register the MDT segments, custom dumpfn and private data with the
remoteproc core dump functionality.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The per segment dump function is responsible for loading the mba
before device memory segments associated with coredump can be populated
and for cleaning up the resources post coredump.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Refactor re-useable parts of mba load/unload sequence into mba_load and
mba_reclaim respectively. This is done in order to prevent code duplication
for modem coredump, which requires the mba to be loaded before dumping
the segments. The following changes in functionality are intended:
* Add software bypass to avoid high MX current in mpss error path.
* Remove the proxy votes of clk/regs only after the active/reset clks/regs.
* Reclaim MBA memory after mpss_load failure in mba_reclaim func.
* Set/Unset the dump_mba_loaded flag on mba_load/mba_reclaim respectively.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch adds a mechanism for assigning each rproc dump segment with
a custom dump function and private data. The dump function is to be
called for each rproc segment during coredump if assigned.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[bjorn: reordred arguments to rproc_coredump_add_custom_segment()]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Introduce custom dump function and private data per remoteproc dump
segment. The dump function is responsible for filling the device memory
segment associated with coredump
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Current version of rproc_alloc_vring function supports only dynamic vring
allocation.
This patch allows to allocate vrings based on memory region declatation.
Vrings are now manage like memory carveouts, to communize memory management
code in rproc_alloc_registered_carveouts().
Allocated buffer is retrieved in rp_find_vq() thanks to
rproc_find_carveout_by_name() functions for.
This patch sets vrings names to vdev"x"vring"y" with x vdev index in
resource table and y vring index in vdev. This will be updated when
name will be associated to vdev in firmware resource table.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit d5269c4553 ("remoteproc: qcom: q6v5: Propagate EPROBE_DEFER")
fixed up our probe code to handle -EPROBE_DEFER, but it ignored one of
our interrupts, and it also didn't really handle all the other error
codes you might get (e.g., with a bad DT definition). Handle those all
explicitly.
Fixes: d5269c4553 ("remoteproc: qcom: q6v5: Propagate EPROBE_DEFER")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In case of error, the functions devm_kcalloc() and devm_ioremap()
returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return
value check should be replaced with NULL test.
Also removed -EPROBE_DEFER check since devm_kcalloc never return
this error.
Fixes: dc160e4491 ("remoteproc: qcom: Introduce Non-PAS ADSP PIL driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In current version rproc_handle_carveout() function registers carveout
for allocation.
This patch extends rproc_handle_carveout() function to support
pre-registered region. Match is done on region name, then requested
device address and length are checked.
If match found, pre-registered region is associated with resource
table request.
If no name match found, new carveout is registered for allocation.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces a function to verify that a specified carveout
is fitting request device address and associated length
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces rproc_res_mem_entry_init() helper function to
allocate a rproc_mem_entry structure from a reserved memory region.
In that case, rproc_mem_entry structure has no alloc and release ops.
It will be used to assigned the specified reserved memory to any
rproc sub device.
Relation between rproc_mem_entry and rproc sub device will be done
by name.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Memory entry could be allocated in different ways (ioremap,
dma_alloc_coherent, internal RAM allocator...).
This patch introduces an alloc ops in rproc_mem_entry structure
to associate dedicated allocation mechanism to each memory entry
descriptor in order to do remote core agnostic from memory allocators.
The introduction of this ops allows to perform allocation of all registered
carveout at the same time, just before calling rproc_start().
It simplifies and makes uniform carveout management whatever origin.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch provides a new function to find a carveout according
to a name.
If match found, this function returns a pointer on the corresponding
carveout (rproc_mem_entry structure).
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces a new API to allow platform driver to register
platform specific carveout regions.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch introduces rproc_mem_entry_init helper function to
simplify rproc_mem_entry structure allocation and filling by
client.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add name field in struct rproc_mem_entry.
This new field will be used to match memory area
requested in resource table with pre-registered carveout.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Memory entry could be allocated in different ways (ioremap,
dma_alloc_coherent, internal RAM allocator...).
This patch introduces a release ops in rproc_mem_entry structure
to associate dedicated release mechanism to each memory entry descriptor
in order to keep remoteproc core generic.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This new function translates CPU virtual address in
CPU physical one according to virtual address location.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
If there is no IOMMU associate to remote processor device,
remoteproc_core won't be able to satisfy device address requested
in firmware resource table.
Return an error as configuration won't be coherent.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The memory ownership transfer request is performed using SCM, ensure
that SCM is available before we probe the driver if memory protection is
needed by the subsystem.
Fixes: 6c5a9dc248 ("remoteproc: qcom: Make secure world call for mem ownership switch")
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bjorn: Added condition for need_mem_protection, updated commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Assign the relocated base of the modem image, as the offsets
from the virtual memory might not be based on the physical
address.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds Non PAS ADSP PIL driver for Qualcomm Technologies Inc SoCs.
Added initial support for SDM845 with ADSP bootup and shutdown operation
handled from Application Processor SubSystem(APSS).
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
[bjorn: Renamed driver and Kconfig from qcom_adsp_pil to qcom_q6v5_adsp]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently with GLINK_SSR enabled each fatal crash results in servicing
a crash from wdog as well. This is due to a race that occurs in setting
the running flag in the shutdown path. Fix this by moving the running
flag to the end of fatal interrupt handler.
Crash Logs:
qcom-q6v5-pil 4080000.remoteproc: fatal error without message
remoteproc remoteproc0: crash detected in 4080000.remoteproc: type fatal
error
remoteproc remoteproc0: handling crash #1 in 4080000.remoteproc
remoteproc remoteproc0: recovering 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: watchdog without message
remoteproc remoteproc0: crash detected in 4080000.remoteproc: type watchdog
remoteproc:glink-edge: intent request timed out
qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: failed to send
cleanup message
qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: timeout waiting
for cleanup done message
qcom-q6v5-pil 4080000.remoteproc: timed out on wait
qcom-q6v5-pil 4080000.remoteproc: port failed halt
remoteproc remoteproc0: stopped remote processor 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss
remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
remoteproc remoteproc0: handling crash #2 in 4080000.remoteproc
remoteproc remoteproc0: recovering 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: port failed halt
remoteproc remoteproc0: stopped remote processor 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss
remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The remoteproc framework provides a sysfs file 'firmware'
for modifying the firmware image name from userspace. Add
an additional check to ensure NULL firmwares are errored
out right away, rather than getting a delayed error while
requesting a firmware during the start of a remoteproc
later on.
Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the presence of a PDC block working with subsystem RSC, assert/deassert
PDC reset in modem start/stop path.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Explicitly get mss_restart to facilitate adding PDC reset line
for modem on SDM845 SoCs
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatibles for the three PAS based remote processors found in
QCS404.
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The qcom_q6v5_pil implements support for the self-authenticating modem
subsystem. With the introduction of other q6v5 based non-TZ based
remoteproc driver the current name is cause for confusion, so rename it
to be more specific.
No functional change.
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Hexagon v5 ADSP driver is used for more than only the ADSP and
there's an upcoming non-PAS ADSP PIL for SDM845, so rename the driver to
qcom_q6v5_pas in order to better suite this.
Cc: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In the case that the interrupts fail to result because of the
interrupt-controller not yet being registered the
platform_get_irq_byname() call will fail with -EPROBE_DEFER, but passing
this into devm_request_threaded_irq() will result in -EINVAL being
returned, the driver is therefor not reprobed later.
Fixes: 3b415c8fb2 ("remoteproc: q6v5: Extract common resource handling")
Cc: stable@vger.kernel.org
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for booting the Audio and Compute DSPs found in Qualcomm's
SDM845 platform.
As with the previous platforms the power rail handling needs to be
updated once the appropriate support lands upstream.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
da8xx_rproc_mem size is of type size_t, so use %zx to format the debug
print of it to avoid a compile warning.
Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Switch to using the reset framework instead of handcoded reset routines
we used so far.
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The Davinci remoteproc driver does not support error recovery at
present, so mark the corresponding remoteproc flag appropriately
so that the debugfs flag shows the value as 'disabled' by default.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The format specifier "%p" can leak kernel addresses.
Use "%pK" instead.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The format specifier "%p" can leak kernel addresses.
Use "%pK" instead.
This patch proposes changes for remoteproc core only.
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
A new driver got added that depends on QCOM_SMD and fails to link
as built-in with CONFIG_QCOM_SMD=m:
drivers/remoteproc/qcom_common.o: In function `smd_subdev_stop':
qcom_common.c:(.text+0x674): undefined reference to `qcom_smd_unregister_edge'
drivers/remoteproc/qcom_common.o: In function `smd_subdev_start':
qcom_common.c:(.text+0x700): undefined reference to `qcom_smd_register_edge'
We've fixed the same thing several times before, so use the same
dependency here.
Fixes: 3a3d4163e0 ("remoteproc: qcom: Introduce Hexagon V5 based WCSS driver")
Acked-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Unwind the modified table_ptr and restore it to the local copy
upon any subsequent failures in the rproc_start() function. This
keeps the function to remain balanced on failures without the need
to balance any modified variables elsewhere.
While at this, do some minor cleanup of the extra lines between
the failure labels as well.
Signed-off-by: Suman Anna <s-anna@ti.com>
[bjorn: unconditionally set table_ptr to cached_table]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
GCC_MSS_AXIS2 clock is used for disabling boot IMEM (a part of
AP boot up). With Boot IMEM disable now a part TZ/ATF, AXIS2
clock is no longer required post AP boot up and expected to
remain untouched. However if the clock is turned ON after Q6
is brought out of reset and later turned off, it results in
modem hang. When Q6 attempts a power collapse the internal
handshaking to check if AXIS2 is idle never goes through since
it is turned off preventing the RSC from getting triggered,
leaving modem in a funky state. Hence removing AXIS2 clk
enable/disable from the driver.
Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The new driver only works as built-in code at the moment but fails
with a link error when configured as a loadable module:
WARNING: modpost: missing MODULE_LICENSE() in drivers/remoteproc/qcom_q6v5.o
see include/linux/module.h for more information
ERROR: "qcom_q6v5_init" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined!
ERROR: "qcom_q6v5_wait_for_start" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined!
ERROR: "qcom_q6v5_prepare" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined!
ERROR: "qcom_q6v5_unprepare" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined!
ERROR: "qcom_q6v5_request_stop" [drivers/remoteproc/qcom_q6v5_pil.ko] undefined!
ERROR: "qcom_q6v5_init" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_q6v5_wait_for_start" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_q6v5_prepare" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_q6v5_unprepare" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
ERROR: "qcom_q6v5_request_stop" [drivers/remoteproc/qcom_adsp_pil.ko] undefined!
This exports the internal symbols as needed and adds the MODULE_LICENSE()
and MODULE_DESCRIPTION() tags. I could not figure out the author, so I
did not add a MODULE_AUTHOR() tag for now.
Fixes: 3b415c8fb2 ("remoteproc: q6v5: Extract common resource handling")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
On rare occasions a subdevice might need to prepare some hardware
resources before a remote processor is booted, and clean up some
state after it has been shut down.
One such example is the IP Accelerator found in various Qualcomm
platforms, which is accessed directly from both the modem remoteproc
and the application subsystem and requires an intricate lockstep
process when bringing the modem up and down.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[elder@linaro.org: minor description and comment edits]
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Rename functions used when subdevices are started and stopped to
reflect the new naming scheme.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
In preparation of adding the additional prepare and unprepare operations
make the client responsible for filling out the function pointers of the
rproc_subdev. This makes the arguments to rproc_add_subdev() more
manageable, in particular when some of the functions are left out.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[elder@linaro.org: added comment about assigning function pointers]
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some subdevices, such as glink ssr only care about the stop operation,
so make the operations optional to reduce client code.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
"start" and "stop" are more suitable names for how these two operations
are used, and they fit better with the upcoming introduction of two
additional operations in the struct.
Tested-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[elder@linaro.org: minor comment edits]
Signed-off-by Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
IPQ8074 has an integrated Hexagon dsp core q6v5 and a wireless lan
(Lithium) IP. An mdt type single image format is used for the
firmware. So the mdt_load function can be directly used to load
the firmware. Also add the relevant resets required for this core.
Acked-by: Rob Herring <robh@kernel.org> (bindings)
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
[bjorn: Rewrote as a separate driver, intead of extending q6v5_pil.c]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Migrate the MSS remoteproc driver to use the newly extracted helper
functions.
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Migrate the Hexagon V5 PAS (ADSP) driver to using the newly extracted
helper functions. The use of the handover callback does introduce latent
disabling of proxy resources. But apart from this there should be no
change in functionality.
Reviewed-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Shared between all Hexagon V5 based remoteprocs is the handling of the 5
interrupts and the SMP2P stop request, so break this out into a separate
function in order to allow these drivers to be cleaned up.
Reviewed-by: Rohit kumar <rohitkr@codeaurora.org>
Tested-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tiwei Bie
Sibi Sankar
Loic Pallardy
Brian Norris
Wei Yongjun
Rohit kumar
Suman Anna
Bjorn Andersson
Bartosz Golaszewski
Arnd Bergmann
Alex Elder
Sricharan R