Граф коммитов

221 Коммитов

Автор SHA1 Сообщение Дата
Matthias Kaehlcke 1342d8080f softirq: Don't skip softirq execution when softirq thread is parking
When a CPU is unplugged the kernel threads of this CPU are parked (see
smpboot_park_threads()). kthread_park() is used to mark each thread as
parked and wake it up, so it can complete the process of parking itselfs
(see smpboot_thread_fn()).

If local softirqs are pending on interrupt exit invoke_softirq() is called
to process the softirqs, however it skips processing when the softirq
kernel thread of the local CPU is scheduled to run. The softirq kthread is
one of the threads that is parked when a CPU is unplugged. Parking the
kthread wakes it up, however only to complete the parking process, not to
process the pending softirqs. Hence processing of softirqs at the end of an
interrupt is skipped, but not done elsewhere, which can result in warnings
about pending softirqs when a CPU is unplugged:

/sys/devices/system/cpu # echo 0 > cpu4/online
[ ... ] NOHZ: local_softirq_pending 02
[ ... ] NOHZ: local_softirq_pending 202
[ ... ] CPU4: shutdown
[ ... ] psci: CPU4 killed.

Don't skip processing of softirqs at the end of an interrupt when the
softirq thread of the CPU is parking.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20190128234625.78241-3-mka@chromium.org
2019-02-10 21:51:39 +01:00
Linus Torvalds 5947a64a7e Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
 "The interrupt brigade came up with the following updates:

   - Driver for the Marvell System Error Interrupt machinery

   - Overhaul of the GIC-V3 ITS driver

   - Small updates and fixes all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  genirq: Fix race on spurious interrupt detection
  softirq: Fix typo in __do_softirq() comments
  genirq: Fix grammar s/an /a /
  irqchip/gic: Unify GIC priority definitions
  irqchip/gic-v3: Remove acknowledge loop
  dt-bindings/interrupt-controller: Add documentation for Marvell SEI controller
  dt-bindings/interrupt-controller: Update Marvell ICU bindings
  irqchip/irq-mvebu-icu: Add support for System Error Interrupts (SEI)
  arm64: marvell: Enable SEI driver
  irqchip/irq-mvebu-sei: Add new driver for Marvell SEI
  irqchip/irq-mvebu-icu: Support ICU subnodes
  irqchip/irq-mvebu-icu: Disociate ICU and NSR
  irqchip/irq-mvebu-icu: Clarify the reset operation of configured interrupts
  irqchip/irq-mvebu-icu: Fix wrong private data retrieval
  dt-bindings/interrupt-controller: Fix Marvell ICU length in the example
  genirq/msi: Allow creation of a tree-based irqdomain for platform-msi
  dt-bindings: irqchip: renesas-irqc: Document r8a7744 support
  dt-bindings: irqchip: renesas-irqc: Document R-Car E3 support
  irqchip/pdc: Setup all edge interrupts as rising edge at GIC
  irqchip/gic-v3-its: Allow use of LPI tables in reserved memory
  ...
2018-10-25 11:43:47 -07:00
Yangtao Li e45506ac0a softirq: Fix typo in __do_softirq() comments
s/s/as

[ mingo: Also add a missing 'the', add proper punctuation and clarify what 'swap' means here. ]

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: alexander.levin@verizon.com
Cc: frederic@kernel.org
Cc: joel@joelfernandes.org
Cc: paulmck@linux.vnet.ibm.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20181018142133.12341-1-tiny.windzz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-18 18:10:23 +02:00
Paul E. McKenney 65cfe3583b rcu: Define RCU-bh update API in terms of RCU
Now that the main RCU API knows about softirq disabling and softirq's
quiescent states, the RCU-bh update code can be dispensed with.
This commit therefore removes the RCU-bh update-side implementation and
defines RCU-bh's update-side API in terms of that of either RCU-preempt or
RCU-sched, depending on the setting of the CONFIG_PREEMPT Kconfig option.

In kernels built with CONFIG_RCU_NOCB_CPU=y this has the knock-on effect
of reducing by one the number of rcuo kthreads per CPU.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2018-08-30 16:02:40 -07:00
Paul E. McKenney d28139c4e9 rcu: Apply RCU-bh QSes to RCU-sched and RCU-preempt when safe
One necessary step towards consolidating the three flavors of RCU is to
make sure that the resulting consolidated "one flavor to rule them all"
correctly handles networking denial-of-service attacks.  One thing that
allows RCU-bh to do so is that __do_softirq() invokes rcu_bh_qs() every
so often, and so something similar has to happen for consolidated RCU.

This must be done carefully.  For example, if a preemption-disabled
region of code takes an interrupt which does softirq processing before
returning, consolidated RCU must ignore the resulting rcu_bh_qs()
invocations -- preemption is still disabled, and that means an RCU
reader for the consolidated flavor.

This commit therefore creates a new rcu_softirq_qs() that is called only
from the ksoftirqd task, thus avoiding the interrupted-a-preempted-region
problem.  This new rcu_softirq_qs() function invokes rcu_sched_qs(),
rcu_preempt_qs(), and rcu_preempt_deferred_qs().  The latter call handles
any deferred quiescent states.

Note that __do_softirq() still invokes rcu_bh_qs().  It will continue to
do so until a later stage of cleanup when the RCU-bh flavor is removed.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix !SMP issue located by kbuild test robot. ]
2018-08-30 16:02:38 -07:00
Frederic Weisbecker 0a0e0829f9 nohz: Fix missing tick reprogram when interrupting an inline softirq
The full nohz tick is reprogrammed in irq_exit() only if the exit is not in
a nesting interrupt. This stands as an optimization: whether a hardirq or a
softirq is interrupted, the tick is going to be reprogrammed when necessary
at the end of the inner interrupt, with even potential new updates on the
timer queue.

When soft interrupts are interrupted, it's assumed that they are executing
on the tail of an interrupt return. In that case tick_nohz_irq_exit() is
called after softirq processing to take care of the tick reprogramming.

But the assumption is wrong: softirqs can be processed inline as well, ie:
outside of an interrupt, like in a call to local_bh_enable() or from
ksoftirqd.

Inline softirqs don't reprogram the tick once they are done, as opposed to
interrupt tail softirq processing. So if a tick interrupts an inline
softirq processing, the next timer will neither be reprogrammed from the
interrupting tick's irq_exit() nor after the interrupted softirq
processing. This situation may leave the tick unprogrammed while timers are
armed.

To fix this, simply keep reprogramming the tick even if a softirq has been
interrupted. That can be optimized further, but for now correctness is more
important.

Note that new timers enqueued in nohz_full mode after a softirq gets
interrupted will still be handled just fine through self-IPIs triggered by
the timer code.

Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org # 4.14+
Link: https://lkml.kernel.org/r/1533303094-15855-1-git-send-email-frederic@kernel.org
2018-08-03 15:52:10 +02:00
Linus Torvalds 3c53776e29 Mark HI and TASKLET softirq synchronous
Way back in 4.9, we committed 4cd13c21b2 ("softirq: Let ksoftirqd do
its job"), and ever since we've had small nagging issues with it.  For
example, we've had:

  1ff688209e ("watchdog: core: make sure the watchdog_worker is not deferred")
  8d5755b3f7 ("watchdog: softdog: fire watchdog even if softirqs do not get to run")
  217f697436 ("net: busy-poll: allow preemption in sk_busy_loop()")

all of which worked around some of the effects of that commit.

The DVB people have also complained that the commit causes excessive USB
URB latencies, which seems to be due to the USB code using tasklets to
schedule USB traffic.  This seems to be an issue mainly when already
living on the edge, but waiting for ksoftirqd to handle it really does
seem to cause excessive latencies.

Now Hanna Hawa reports that this issue isn't just limited to USB URB and
DVB, but also causes timeout problems for the Marvell SoC team:

 "I'm facing kernel panic issue while running raid 5 on sata disks
  connected to Macchiatobin (Marvell community board with Armada-8040
  SoC with 4 ARMv8 cores of CA72) Raid 5 built with Marvell DMA engine
  and async_tx mechanism (ASYNC_TX_DMA [=y]); the DMA driver (mv_xor_v2)
  uses a tasklet to clean the done descriptors from the queue"

The latency problem causes a panic:

  mv_xor_v2 f0400000.xor: dma_sync_wait: timeout!
  Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for transaction

We've discussed simply just reverting the original commit entirely, and
also much more involved solutions (with per-softirq threads etc).  This
patch is intentionally stupid and fairly limited, because the issue
still remains, and the other solutions either got sidetracked or had
other issues.

We should probably also consider the timer softirqs to be synchronous
and not be delayed to ksoftirqd (since they were the issue with the
earlier watchdog problems), but that should be done as a separate patch.
This does only the tasklet cases.

Reported-and-tested-by: Hanna Hawa <hannah@marvell.com>
Reported-and-tested-by: Josef Griebichler <griebichler.josef@gmx.at>
Reported-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-17 11:12:43 -07:00
Joel Fernandes (Google) 1a63dcd876 softirq: Reorder trace_softirqs_on to prevent lockdep splat
I'm able to reproduce a lockdep splat with config options:
CONFIG_PROVE_LOCKING=y,
CONFIG_DEBUG_LOCK_ALLOC=y and
CONFIG_PREEMPTIRQ_EVENTS=y

$ echo 1 > /d/tracing/events/preemptirq/preempt_enable/enable

[   26.112609] DEBUG_LOCKS_WARN_ON(current->softirqs_enabled)
[   26.112636] WARNING: CPU: 0 PID: 118 at kernel/locking/lockdep.c:3854
[...]
[   26.144229] Call Trace:
[   26.144926]  <IRQ>
[   26.145506]  lock_acquire+0x55/0x1b0
[   26.146499]  ? __do_softirq+0x46f/0x4d9
[   26.147571]  ? __do_softirq+0x46f/0x4d9
[   26.148646]  trace_preempt_on+0x8f/0x240
[   26.149744]  ? trace_preempt_on+0x4d/0x240
[   26.150862]  ? __do_softirq+0x46f/0x4d9
[   26.151930]  preempt_count_sub+0x18a/0x1a0
[   26.152985]  __do_softirq+0x46f/0x4d9
[   26.153937]  irq_exit+0x68/0xe0
[   26.154755]  smp_apic_timer_interrupt+0x271/0x280
[   26.156056]  apic_timer_interrupt+0xf/0x20
[   26.157105]  </IRQ>

The issue was this:

preempt_count = 1 << SOFTIRQ_SHIFT

	__local_bh_enable(cnt = 1 << SOFTIRQ_SHIFT) {
		if (softirq_count() == (cnt && SOFTIRQ_MASK)) {
			trace_softirqs_on() {
				current->softirqs_enabled = 1;
			}
		}
		preempt_count_sub(cnt) {
			trace_preempt_on() {
				tracepoint() {
					rcu_read_lock_sched() {
						// jumps into lockdep

Where preempt_count still has softirqs disabled, but
current->softirqs_enabled is true, and we get a splat.

Link: http://lkml.kernel.org/r/20180607201143.247775-1-joel@joelfernandes.org

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Erick Reyes <erickreyes@google.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: d59158162e ("tracing: Add support for preempt and irq enable/disable events")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-06-21 15:12:43 -04:00
Linus Torvalds db020be9f7 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...
2018-06-04 19:59:22 -07:00
Paul E. McKenney c3442697c2 softirq: Eliminate unused cond_resched_softirq() macro
The cond_resched_softirq() macro is not used anywhere in mainline, so
this commit simplifies the kernel by eliminating it.

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
2018-05-15 10:27:35 -07:00
Frederic Weisbecker 0f6f47bacb softirq/core: Turn default irq_cpustat_t to standard per-cpu
In order to optimize and consolidate softirq mask accesses, let's
convert the default irq_cpustat_t implementation to per-CPU standard API.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/1525786706-22846-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-05-14 11:25:27 +02:00
Ingo Molnar 82b691bedf softirq: Consolidate common code in tasklet_[hi]_action()
tasklet_action() + tasklet_hi_action() are almost identical.  Move the
common code from both function into __tasklet_action_common() and let
both functions invoke it with different arguments.

[ bigeasy: Splitted out from RT's "tasklet: Prevent tasklets from going
	   into infinite spin in RT" and added commit message]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Julia Cartwright <juliac@eso.teric.us>
Link: https://lkml.kernel.org/r/20180227164808.10093-3-bigeasy@linutronix.de
2018-03-09 11:50:55 +01:00
Ingo Molnar 6498ddad30 softirq: Consolidate common code in __tasklet_[hi]_schedule()
__tasklet_schedule() and __tasklet_hi_schedule() are almost identical.
Move the common code from both function into __tasklet_schedule_common()
and let both functions invoke it with different arguments.

[ bigeasy: Splitted out from RT's "tasklet: Prevent tasklets from going
  	   into infinite spin in RT" and added commit message. Use
  	   this_cpu_ptr(headp) in __tasklet_schedule_common() as suggested
  	   by Julia Cartwright ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Julia Cartwright <juliac@eso.teric.us>
Link: https://lkml.kernel.org/r/20180227164808.10093-2-bigeasy@linutronix.de
2018-03-09 11:50:55 +01:00
Paul E. McKenney edf22f4ca2 softirq: Eliminate cond_resched_rcu_qs() in favor of cond_resched()
Now that cond_resched() also provides RCU quiescent states when
needed, it can be used in place of cond_resched_rcu_qs().  This
commit therefore makes this change.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
2017-12-04 10:28:58 -08:00
Levin, Alexander (Sasha Levin) 4675ff05de kmemcheck: rip it out
Fix up makefiles, remove references, and git rm kmemcheck.

Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.com
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Vegard Nossum <vegardno@ifi.uio.no>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Tim Hansen <devtimhansen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15 18:21:05 -08:00
Frederic Weisbecker f71b74bca6 irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-3-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-08 11:13:48 +01:00
NeilBrown 717a94b5fc sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
It is not safe for one thread to modify the ->flags
of another thread as there is no locking that can protect
the update.

So tsk_restore_flags(), which takes a task pointer and modifies
the flags, is an invitation to do the wrong thing.

All current users pass "current" as the task, so no developers have
accepted that invitation.  It would be best to ensure it remains
that way.

So rename tsk_restore_flags() to current_restore_flags() and don't
pass in a task_struct pointer.  Always operate on current->flags.

Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-11 09:06:32 +02:00
Sagi Grimberg f660f60667 softirq: Display IRQ_POLL for irq-poll statistics
This library was moved to the generic area and was
renamed to irq-poll. Hence, update proc/softirqs output accordingly.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-21 15:45:47 -06:00
Linus Torvalds 9ffc66941d This adds a new gcc plugin named "latent_entropy". It is designed to
extract as much possible uncertainty from a running system at boot time as
 possible, hoping to capitalize on any possible variation in CPU operation
 (due to runtime data differences, hardware differences, SMP ordering,
 thermal timing variation, cache behavior, etc).
 
 At the very least, this plugin is a much more comprehensive example for
 how to manipulate kernel code using the gcc plugin internals.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 Comment: Kees Cook <kees@outflux.net>
 
 iQIcBAABCgAGBQJX/BAFAAoJEIly9N/cbcAmzW8QALFbCs7EFFkML+M/M/9d8zEk
 1QbUs/z8covJTTT1PjSdw7JUrAMulI3S00owpcQVd/PcWjRPU80QwfsXBgIB0tvC
 Kub2qxn6Oaf+kTB646zwjFgjdCecw/USJP+90nfcu2+LCnE8ReclKd1aUee+Bnhm
 iDEUyH2ONIoWq6ta2Z9sA7+E4y2ZgOlmW0iga3Mnf+OcPtLE70fWPoe5E4g9DpYk
 B+kiPDrD9ql5zsHaEnKG1ldjiAZ1L6Grk8rGgLEXmbOWtTOFmnUhR+raK5NA/RCw
 MXNuyPay5aYPpqDHFm+OuaWQAiPWfPNWM3Ett4k0d9ZWLixTcD1z68AciExwk7aW
 SEA8b1Jwbg05ZNYM7NJB6t6suKC4dGPxWzKFOhmBicsh2Ni5f+Az0BQL6q8/V8/4
 8UEqDLuFlPJBB50A3z5ngCVeYJKZe8Bg/Swb4zXl6mIzZ9darLzXDEV6ystfPXxJ
 e1AdBb41WC+O2SAI4l64yyeswkGo3Iw2oMbXG5jmFl6wY/xGp7dWxw7gfnhC6oOh
 afOT54p2OUDfSAbJaO0IHliWoIdmE5ZYdVYVU9Ek+uWyaIwcXhNmqRg+Uqmo32jf
 cP5J9x2kF3RdOcbSHXmFp++fU+wkhBtEcjkNpvkjpi4xyA47IWS7lrVBBebrCq9R
 pa/A7CNQwibIV6YD8+/p
 =1dUK
 -----END PGP SIGNATURE-----

Merge tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull gcc plugins update from Kees Cook:
 "This adds a new gcc plugin named "latent_entropy". It is designed to
  extract as much possible uncertainty from a running system at boot
  time as possible, hoping to capitalize on any possible variation in
  CPU operation (due to runtime data differences, hardware differences,
  SMP ordering, thermal timing variation, cache behavior, etc).

  At the very least, this plugin is a much more comprehensive example
  for how to manipulate kernel code using the gcc plugin internals"

* tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  latent_entropy: Mark functions with __latent_entropy
  gcc-plugins: Add latent_entropy plugin
2016-10-15 10:03:15 -07:00
Emese Revfy 0766f788eb latent_entropy: Mark functions with __latent_entropy
The __latent_entropy gcc attribute can be used only on functions and
variables.  If it is on a function then the plugin will instrument it for
gathering control-flow entropy. If the attribute is on a variable then
the plugin will initialize it with random contents.  The variable must
be an integer, an integer array type or a structure with integer fields.

These specific functions have been selected because they are init
functions (to help gather boot-time entropy), are called at unpredictable
times, or they have variable loops, each of which provide some level of
latent entropy.

Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: expanded commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
2016-10-10 14:51:45 -07:00
Linus Torvalds 597f03f9d1 Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
 "Yet another batch of cpu hotplug core updates and conversions:

   - Provide core infrastructure for multi instance drivers so the
     drivers do not have to keep custom lists.

   - Convert custom lists to the new infrastructure. The block-mq custom
     list conversion comes through the block tree and makes the diffstat
     tip over to more lines removed than added.

   - Handle unbalanced hotplug enable/disable calls more gracefully.

   - Remove the obsolete CPU_STARTING/DYING notifier support.

   - Convert another batch of notifier users.

   The relayfs changes which conflicted with the conversion have been
   shipped to me by Andrew.

   The remaining lot is targeted for 4.10 so that we finally can remove
   the rest of the notifiers"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  cpufreq: Fix up conversion to hotplug state machine
  blk/mq: Reserve hotplug states for block multiqueue
  x86/apic/uv: Convert to hotplug state machine
  s390/mm/pfault: Convert to hotplug state machine
  mips/loongson/smp: Convert to hotplug state machine
  mips/octeon/smp: Convert to hotplug state machine
  fault-injection/cpu: Convert to hotplug state machine
  padata: Convert to hotplug state machine
  cpufreq: Convert to hotplug state machine
  ACPI/processor: Convert to hotplug state machine
  virtio scsi: Convert to hotplug state machine
  oprofile/timer: Convert to hotplug state machine
  block/softirq: Convert to hotplug state machine
  lib/irq_poll: Convert to hotplug state machine
  x86/microcode: Convert to hotplug state machine
  sh/SH-X3 SMP: Convert to hotplug state machine
  ia64/mca: Convert to hotplug state machine
  ARM/OMAP/wakeupgen: Convert to hotplug state machine
  ARM/shmobile: Convert to hotplug state machine
  arm64/FP/SIMD: Convert to hotplug state machine
  ...
2016-10-03 19:43:08 -07:00
Eric Dumazet 4cd13c21b2 softirq: Let ksoftirqd do its job
A while back, Paolo and Hannes sent an RFC patch adding threaded-able
napi poll loop support : (https://patchwork.ozlabs.org/patch/620657/)

The problem seems to be that softirqs are very aggressive and are often
handled by the current process, even if we are under stress and that
ksoftirqd was scheduled, so that innocent threads would have more chance
to make progress.

This patch makes sure that if ksoftirq is running, we let it
perform the softirq work.

Jonathan Corbet summarized the issue in https://lwn.net/Articles/687617/

Tested:

 - NIC receiving traffic handled by CPU 0
 - UDP receiver running on CPU 0, using a single UDP socket.
 - Incoming flood of UDP packets targeting the UDP socket.

Before the patch, the UDP receiver could almost never get CPU cycles and
could only receive ~2,000 packets per second.

After the patch, CPU cycles are split 50/50 between user application and
ksoftirqd/0, and we can effectively read ~900,000 packets per second,
a huge improvement in DOS situation. (Note that more packets are now
dropped by the NIC itself, since the BH handlers get less CPU cycles to
drain RX ring buffer)

Since the load runs in well identified threads context, an admin can
more easily tune process scheduling parameters if needed.

Reported-by: Paolo Abeni <pabeni@redhat.com>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Miller <davem@davemloft.net>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Cc: Jesper Dangaard Brouer <jbrouer@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1472665349.14381.356.camel@edumazet-glaptop3.roam.corp.google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-30 10:43:36 +02:00
Sebastian Andrzej Siewior c4544dbc7a kernel/softirq: Convert to hotplug state machine
Install the callbacks via the state machine.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160818125731.27256-7-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-06 18:30:22 +02:00
Alexander Potapenko be7635e728 arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections
KASAN needs to know whether the allocation happens in an IRQ handler.
This lets us strip everything below the IRQ entry point to reduce the
number of unique stack traces needed to be stored.

Move the definition of __irq_entry to <linux/interrupt.h> so that the
users don't need to pull in <linux/ftrace.h>.  Also introduce the
__softirq_entry macro which is similar to __irq_entry, but puts the
corresponding functions to the .softirqentry.text section.

Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-25 16:37:42 -07:00
Sebastian Andrzej Siewior f904f58263 sched/debug: Fix preempt_disable_ip recording for preempt_disable()
The preempt_disable() invokes preempt_count_add() which saves the caller
in ->preempt_disable_ip. It uses CALLER_ADDR1 which does not look for
its caller but for the parent of the caller. Which means we get the correct
caller for something like spin_lock() unless the architectures inlines
those invocations. It is always wrong for preempt_disable() or
local_bh_disable().

This patch makes the function get_lock_parent_ip() which tries
CALLER_ADDR0,1,2 if the former is a locking function.
This seems to record the preempt_disable() caller properly for
preempt_disable() itself as well as for get_cpu_var() or
local_bh_disable().

Steven asked for the get_parent_ip() -> get_lock_parent_ip() rename.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160226135456.GB18244@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 09:53:10 +01:00
Linus Torvalds 8308756f45 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
 "The main changes are:

   - mutex, completions and rtmutex micro-optimizations
   - lock debugging fix
   - various cleanups in the MCS and the futex code"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rtmutex: Optimize setting task running after being blocked
  locking/rwsem: Use task->state helpers
  sched/completion: Add lock-free checking of the blocking case
  sched/completion: Remove unnecessary ->wait.lock serialization when reading completion state
  locking/mutex: Explicitly mark task as running after wakeup
  futex: Fix argument handling in futex_lock_pi() calls
  doc: Fix misnamed FUTEX_CMP_REQUEUE_PI op constants
  locking/Documentation: Update code path
  softirq/preempt: Add missing current->preempt_disable_ip update
  locking/osq: No need for load/acquire when acquire-polling
  locking/mcs: Better differentiate between MCS variants
  locking/mutex: Introduce ww_mutex_set_context_slowpath()
  locking/mutex: Move MCS related comments to proper location
  locking/mutex: Checking the stamp is WW only
2015-02-09 15:24:03 -08:00
Paul E. McKenney 60479676eb ksoftirqd: Use new cond_resched_rcu_qs() function
Simplify run_ksoftirqd() by using the new cond_resched_rcu_qs() function
that conditionally reschedules, but unconditionally supplies an RCU
quiescent state.  This commit is separate from the previous commit by
Calvin Owens because Calvin's approach can be backported, while this
commit cannot be.  The reason that this commit cannot be backported is
that cond_resched_rcu_qs() does not always provide the needed quiescent
state in earlier kernels.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-14 13:20:26 -08:00
Calvin Owens 28423ad283 ksoftirqd: Enable IRQs and call cond_resched() before poking RCU
While debugging an issue with excessive softirq usage, I encountered the
following note in commit 3e339b5dae ("softirq: Use hotplug thread
infrastructure"):

    [ paulmck: Call rcu_note_context_switch() with interrupts enabled. ]

...but despite this note, the patch still calls RCU with IRQs disabled.

This seemingly innocuous change caused a significant regression in softirq
CPU usage on the sending side of a large TCP transfer (~1 GB/s): when
introducing 0.01% packet loss, the softirq usage would jump to around 25%,
spiking as high as 50%. Before the change, the usage would never exceed 5%.

Moving the call to rcu_note_context_switch() after the cond_sched() call,
as it was originally before the hotplug patch, completely eliminated this
problem.

Signed-off-by: Calvin Owens <calvinowens@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-14 13:18:58 -08:00
Heiko Carstens 0f1ba9a2ce softirq/preempt: Add missing current->preempt_disable_ip update
While debugging some "sleeping function called from invalid context" bug I
realized that the debugging message "Preemption disabled at:" pointed to
an incorrect function.

In particular if the last function/action that disabled preemption was
spin_lock_bh() then current->preempt_disable_ip won't be updated.

The reason for this is that __local_bh_disable_ip() will increase
preempt_count manually instead of calling preempt_count_add(), which
would handle the update correctly.

It look like the manual handling was done to work around some lockdep issue.

So add the missing update of current->preempt_disable_ip to
__local_bh_disable_ip() as well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20150107090441.GC4365@osiris
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 15:16:21 +01:00
Paul E. McKenney 38200cf247 rcu: Remove "cpu" argument to rcu_note_context_switch()
The "cpu" argument to rcu_note_context_switch() is always the current
CPU, so drop it.  This in turn allows the "cpu" argument to
rcu_preempt_note_context_switch() to be removed, which allows the sole
use of "cpu" in both functions to be replaced with a this_cpu_ptr().
Again, the anticipated cross-CPU uses of these functions has been
replaced by NO_HZ_FULL.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-11-03 19:20:34 -08:00
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Paul E. McKenney 284a8c93af rcu: Per-CPU operation cleanups to rcu_*_qs() functions
The rcu_bh_qs(), rcu_preempt_qs(), and rcu_sched_qs() functions use
old-style per-CPU variable access and write to ->passed_quiesce even
if it is already set.  This commit therefore updates to use the new-style
per-CPU variable access functions and avoids the spurious writes.
This commit also eliminates the "cpu" argument to these functions because
they are always invoked on the indicated CPU.

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:27:35 -07:00
Christoph Lameter 22127e93c5 time: Replace __get_cpu_var uses
Convert uses of __get_cpu_var for creating a address from a percpu
offset to this_cpu_ptr.

The two cases where get_cpu_var is used to actually access a percpu
variable are changed to use this_cpu_read/raw_cpu_read.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:44 -04:00
Ingo Molnar e14505a8d5 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

" 1.      Update RCU documentation.  These were posted to LKML at
          https://lkml.org/lkml/2014/4/28/634.

  2.      Miscellaneous fixes.  These were posted to LKML at
          https://lkml.org/lkml/2014/4/28/645.

  3.      Torture-test changes.  These were posted to LKML at
          https://lkml.org/lkml/2014/4/28/667.

  4.      Variable-name renaming cleanup, sent separately due to conflicts.
          This was posted to LKML at https://lkml.org/lkml/2014/5/13/854.

  5.      Patch to suppress RCU stall warnings while sysrq requests are
          being processed.  This patch is the RCU portions of the patch
          that Rik posted to LKML at https://lkml.org/lkml/2014/4/29/457.
          The reason for pushing this patch ahead instead of waiting until
          3.17 is that the NMI-based stack traces are messing up sysrq
          output, and in some cases also messing up the system as well."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-22 11:36:10 +02:00
Andi Kleen 722a9f9299 asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
As requested by Linus add explicit __visible to the asmlinkage users.
This marks functions visible to assembler.

Tree sweep for rest of tree.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1398984278-29319-4-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-05-05 16:07:46 -07:00
Eric Dumazet a5d6d3a1b0 softirq: A single rcu_bh_qs() call per softirq set is enough
Calling rcu_bh_qs() after every softirq action is not really needed.
What RCU needs is at least one rcu_bh_qs() per softirq round to note a
quiescent state was passed for rcu_bh.

Note for Paul and myself : this could be inlined as a single instruction
and avoid smp_processor_id()
(sone this_cpu_write(rcu_bh_data.passed_quiesce, 1))

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-04-29 08:45:40 -07:00
Thomas Gleixner 62a08ae2a5 genirq: x86: Ensure that dynamic irq allocation does not conflict
On x86 the allocation of irq descriptors may allocate interrupts which
are in the range of the GSI interrupts. That's wrong as those
interrupts are hardwired and we don't have the irq domain translation
like PPC. So one of these interrupts can be hooked up later to one of
the devices which are hard wired to it and the io_apic init code for
that particular interrupt line happily reuses that descriptor with a
completely different configuration so hell breaks lose.

Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs,
except for a few usage sites which have not yet blown up in our face
for whatever reason. But for drivers which need an irq range, like the
GPIO drivers, we have no limit in place and we don't want to expose
such a detail to a driver.

To cure this introduce a function which an architecture can implement
to impose a lower bound on the dynamic interrupt allocations.

Implement it for x86 and set the lower bound to nr_gsi_irqs, which is
the end of the hardwired interrupt space, so all dynamic allocations
happen above.

That not only allows the GPIO driver to work sanely, it also protects
the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and
htirq code. They need to be cleaned up as well, but that's a separate
issue.

Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Krogerus Heikki <heikki.krogerus@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-04-28 12:20:00 +02:00
Thomas Gleixner d532676cc7 softirq: Add linux/irq.h to make it compile again
On Sparc and S390 the removal of irq.h from kernel_stat.h causes:

   kernel/softirq.c:774:9: error: 'NR_IRQS_LEGACY' undeclared

Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-19 11:28:14 +01:00
Linus Torvalds aafd9d6a46 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer/dynticks updates from Ingo Molnar:
 "This tree contains misc dynticks updates: a fix and three cleanups"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/nohz: Fix overflow error in scheduler_tick_max_deferment()
  nohz_full: fix code style issue of tick_nohz_full_stop_tick
  nohz: Get timekeeping max deferment outside jiffies_lock
  tick: Rename tick_check_idle() to tick_irq_enter()
2014-01-31 09:02:51 -08:00
Joe Perches ce85b4f2ea softirq: use const char * const for softirq_to_name, whitespace neatening
Reduce data size a little.
Reduce checkpatch noise.

$ size kernel/softirq.o*
   text	   data	    bss	    dec	    hex	filename
  11554	   6013	   4008	  21575	   5447	kernel/softirq.o.new
  11474	   6093	   4008	  21575	   5447	kernel/softirq.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:40 -08:00
Joe Perches 4032276415 softirq: convert printks to pr_<level>
Use a more current logging style.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:40 -08:00
Joe Perches 2e702b9f6c softirq: use ffs() in __do_softirq()
Possible speed improvement of __do_softirq() by using ffs() instead of
using a while loop with an & 1 test then single bit shift.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-27 21:02:40 -08:00
Ingo Molnar a2b4c607c9 Merge branch 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent
Pull dynticks cleanups from Frederic Weisbecker.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-25 08:27:26 +01:00
Linus Torvalds 6c64614356 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Ingo Molnar:
  - ARM clocksource/clockevent improvements and fixes
  - generic timekeeping updates: TAI fixes/improvements, cleanups
  - Posix cpu timer cleanups and improvements
  - dynticks updates: full dynticks bugfixes, optimizations and cleanups

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  clocksource: Timer-sun5i: Switch to sched_clock_register()
  timekeeping: Remove comment that's mostly out of date
  rtc-cmos: Add an alarm disable quirk
  timekeeper: fix comment typo for tk_setup_internals()
  timekeeping: Fix missing timekeeping_update in suspend path
  timekeeping: Fix CLOCK_TAI timer/nanosleep delays
  tick/timekeeping: Call update_wall_time outside the jiffies lock
  timekeeping: Avoid possible deadlock from clock_was_set_delayed
  timekeeping: Fix potential lost pv notification of time change
  timekeeping: Fix lost updates to tai adjustment
  clocksource: sh_cmt: Add clk_prepare/unprepare support
  clocksource: bcm_kona_timer: Remove unused bcm_timer_ids
  clocksource: vt8500: Remove deprecated IRQF_DISABLED
  clocksource: tegra: Remove deprecated IRQF_DISABLED
  clocksource: misc drivers: Remove deprecated IRQF_DISABLED
  clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
  clocksource: sh_tmu: Remove unnecessary platform_set_drvdata()
  clocksource: armada-370-xp: Enable timer divider only when needed
  clocksource: clksrc-of: Warn if no clock sources are found
  clocksource: orion: Switch to sched_clock_register()
  ...
2014-01-20 11:34:26 -08:00
Linus Torvalds a0fa1dd3cd Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:

 - Add the initial implementation of SCHED_DEADLINE support: a real-time
   scheduling policy where tasks that meet their deadlines and
   periodically execute their instances in less than their runtime quota
   see real-time scheduling and won't miss any of their deadlines.
   Tasks that go over their quota get delayed (Available to privileged
   users for now)

 - Clean up and fix preempt_enable_no_resched() abuse all around the
   tree

 - Do sched_clock() performance optimizations on x86 and elsewhere

 - Fix and improve auto-NUMA balancing

 - Fix and clean up the idle loop

 - Apply various cleanups and fixes

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  sched: Fix __sched_setscheduler() nice test
  sched: Move SCHED_RESET_ON_FORK into attr::sched_flags
  sched: Fix up attr::sched_priority warning
  sched: Fix up scheduler syscall LTP fails
  sched: Preserve the nice level over sched_setscheduler() and sched_setparam() calls
  sched/core: Fix htmldocs warnings
  sched/deadline: No need to check p if dl_se is valid
  sched/deadline: Remove unused variables
  sched/deadline: Fix sparse static warnings
  m68k: Fix build warning in mac_via.h
  sched, thermal: Clean up preempt_enable_no_resched() abuse
  sched, net: Fixup busy_loop_us_clock()
  sched, net: Clean up preempt_enable_no_resched() abuse
  sched/preempt: Fix up missed PREEMPT_NEED_RESCHED folding
  sched/preempt, locking: Rework local_bh_{dis,en}able()
  sched/clock, x86: Avoid a runtime condition in native_sched_clock()
  sched/clock: Fix up clear_sched_clock_stable()
  sched/clock, x86: Use a static_key for sched_clock_stable
  sched/clock: Remove local_irq_disable() from the clocks
  sched/clock, x86: Rewrite cyc2ns() to avoid the need to disable IRQs
  ...
2014-01-20 10:42:08 -08:00
Frederic Weisbecker 5acac1be49 tick: Rename tick_check_idle() to tick_irq_enter()
This makes the code more symetric against the existing tick functions
called on irq exit: tick_irq_exit() and tick_nohz_irq_exit().

These function are also symetric as they mirror each other's action:
we start to account idle time on irq exit and we stop this accounting
on irq entry. Also the tick is stopped on irq exit and timekeeping
catches up with the tickless time elapsed until we reach irq entry.

This rename was suggested by Peter Zijlstra a long while ago but it
got forgotten in the mass.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Link: http://lkml.kernel.org/r/1387320692-28460-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-01-15 23:05:31 +01:00
Peter Zijlstra 0bd3a173d7 sched/preempt, locking: Rework local_bh_{dis,en}able()
Currently local_bh_disable() is out-of-line for no apparent reason.
So inline it to save a few cycles on call/return nonsense, the
function body is a single add on x86 (a few loads and store extra on
load/store archs).

Also expose two new local_bh functions:

  __local_bh_{dis,en}able_ip(unsigned long ip, unsigned int cnt);

Which implement the actual local_bh_{dis,en}able() behaviour.

The next patch uses the exposed @cnt argument to optimize bh lock
functions.

With build fixes from Jacob Pan.

Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 17:32:27 +01:00
Peter Zijlstra 9ea4c38006 locking: Optimize lock_bh functions
Currently all _bh_ lock functions do two preempt_count operations:

  local_bh_disable();
  preempt_disable();

and for the unlock:

  preempt_enable_no_resched();
  local_bh_enable();

Since its a waste of perfectly good cycles to modify the same variable
twice when you can do it in one go; use the new
__local_bh_{dis,en}able_ip() functions that allow us to provide a
preempt_count value to add/sub.

So define SOFTIRQ_LOCK_OFFSET as the offset a _bh_ lock needs to
add/sub to be done in one go.

As a bonus it gets rid of the preempt_enable_no_resched() usage.

This reduces a 1000 loops of:

  spin_lock_bh(&bh_lock);
  spin_unlock_bh(&bh_lock);

from 53596 cycles to 51995 cycles. I didn't do enough measurements to
say for absolute sure that the result is significant but the the few
runs I did for each suggest it is so.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: jacob.jun.pan@linux.intel.com
Cc: Mike Galbraith <bitbucket@online.de>
Cc: hpa@zytor.com
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: lenb@kernel.org
Cc: rjw@rjwysocki.net
Cc: rui.zhang@intel.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131119151338.GF3694@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-13 13:47:36 +01:00
Frederic Weisbecker e8fcaa5c54 nohz: Convert a few places to use local per cpu accesses
A few functions use remote per CPU access APIs when they
deal with local values.

Just do the right conversion to improve performance, code
readability and debug checks.

While at it, lets extend some of these function names with *_this_cpu()
suffix in order to display their purpose more clearly.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
2013-12-02 20:39:30 +01:00
Frederic Weisbecker 5c4853b60c lockdep: Simplify a bit hardirq <-> softirq transitions
Instead of saving the hardirq state on a per CPU variable, which require
an explicit call before the softirq handling and some complication,
just save and restore the hardirq tracing state through functions
return values and parameters.

It simplifies a bit the black magic that works around the fact that
softirqs can be called from hardirqs while hardirqs can nest on softirqs
but those two cases have very different semantics and only the latter
case assume both states.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1384906054-30676-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-27 11:09:40 +01:00