Граф коммитов

62 Коммитов

Автор SHA1 Сообщение Дата
Trond Myklebust 283ebe3ec4 SUNRPC: Use the client user namespace when encoding creds
When encoding AUTH_UNIX creds and AUTH_GSS upcalls, use the user namespace
of the process that created the rpc client.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-04-26 16:24:32 -04:00
Trond Myklebust 06b5fc3ad9 NFSoRDMA client updates for 5.1
New features:
 - Convert rpc auth layer to use xdr_streams
 - Config option to disable insecure enctypes
 - Reduce size of RPC receive buffers
 
 Bugfixes and cleanups:
 - Fix sparse warnings
 - Check inline size before providing a write chunk
 - Reduce the receive doorbell rate
 - Various tracepoint improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAlxwX1IACgkQ18tUv7Cl
 QOv0tBAA3VXVuKdAtUH4b70q4ufBLkwz40puenDzlQEZXa4XjsGif+Iq62qHmAWW
 oYQfdaof3P+p1G/k9wEmFd6g+vk75a+2QYmmnlzVcSoOHc1teg8we39AbQt6Nz4X
 CZnb1VAuVYctprMXatZugyKsHi+EGWX4raUDtVlx8Zbte6BOSlzn/Cbnvvozeyi4
 bMDQ5mi6vof/20o1qf9FhIjrx3UTYvqF6XOPDdMsQZs8pxDF8Z21LiRgKpPTRNrb
 ci1oIaqraai5SV2riDtMpVnGxR+GDQXaYnyozPnF7kFOwG5nIFyQ56m5aTd2ntd2
 q09lRBHnmiy2sWaocoziXqUonnNi1sZI+fbdCzSTRD45tM0B34DkrvOKsDJuzuba
 m5xZqpoI8hL874EO0AFSEkPmv55BF+K7IMotPmzGo7i4ic+IlyLACDUXh5OkPx6D
 2VSPvXOoAY1U4iJGg6LS9aLWNX99ShVJAuhD5InUW12FLC4GuRwVTIWY3v1s5TIJ
 boUe2EFVoKIxwVkNvf5tKAR1LTNsqtFBPTs1ENtXIdFo1+9ucZX7REhp3bxTlODM
 HheDAqUjlVV5CboB+c1Pggekyv3ON8ihyV3P+dlZ6MFwHnN9s8YOPcReQ91quBZY
 0RNIMaNo2lBgLrkvCMlbDC05AZG6P8LuKhPTcAQ4+7/vfL4PpWI=
 =EiRa
 -----END PGP SIGNATURE-----

Merge tag 'nfs-rdma-for-5.1-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

NFSoRDMA client updates for 5.1

New features:
- Convert rpc auth layer to use xdr_streams
- Config option to disable insecure enctypes
- Reduce size of RPC receive buffers

Bugfixes and cleanups:
- Fix sparse warnings
- Check inline size before providing a write chunk
- Reduce the receive doorbell rate
- Various tracepoint improvements

[Trond: Fix up merge conflicts]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-25 09:35:49 -05:00
NeilBrown e3735c8998 SUNRPC: remove pointless test in unx_match()
As reported by Dan Carpenter, this test for acred->cred being set is
inconsistent with the dereference of the pointer a few lines earlier.

An 'auth_cred' *always* has ->cred set - every place that creates one
initializes this field, often as the first thing done.

So remove this test.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20 17:33:55 -05:00
Chuck Lever 35e77d21ba SUNRPC: Add rpc_auth::au_ralign field
Currently rpc_inline_rcv_pages() uses au_rslack to estimate the
size of the upper layer reply header. This is fine for auth flavors
where au_verfsize == au_rslack.

However, some auth flavors have more going on. krb5i for example has
two more words after the verifier, and another blob following the
RPC message. The calculation involving au_rslack pushes the upper
layer reply header too far into the rcv_buf.

au_rslack is still valuable: it's the amount of buffer space needed
for the reply, and is used when allocating the reply buffer. We'll
keep that.

But, add a new field that can be used to properly estimate the
location of the upper layer header in each RPC reply, based on the
auth flavor in use.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 11:48:36 -05:00
Chuck Lever a00275baa6 SUNRPC: Make AUTH_SYS and AUTH_NULL set au_verfsize
au_verfsize will be needed for a non-flavor-specific computation
in a subsequent patch.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 11:17:47 -05:00
Chuck Lever a0584ee9ae SUNRPC: Use struct xdr_stream when decoding RPC Reply header
Modernize and harden the code path that parses an RPC Reply
message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14 09:11:18 -05:00
Chuck Lever e8680a24a2 SUNRPC: Use struct xdr_stream when constructing RPC Call header
Modernize and harden the code path that constructs each RPC Call
message.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 13:45:17 -05:00
Chuck Lever 80125d4ae7 SUNRPC: Remove some dprintk() call sites from auth functions
Clean up: Reduce dprintk noise by removing dprintk() call sites
from hot path that do not report exceptions. These are usually
replaceable with function graph tracing.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13 12:12:59 -05:00
NeilBrown 2edd8d746e SUNRPC: simplify auth_unix.
1/ discard 'struct unx_cred'.  We don't need any data that
   is not already in 'struct rpc_cred'.
2/ Don't keep these creds in a hash table.  When a credential
   is needed, simply allocate it.  When not needed, discard it.
   This can easily be faster than performing a lookup on
   a shared hash table.
   As the lookup can happen during write-out, use a mempool
   to ensure forward progress.
   This means that we cannot compare two credentials for
   equality by comparing the pointers, but we never do that anyway.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:46 -05:00
NeilBrown d6efccd97e SUNRPC: remove crbind rpc_cred operation
This now always just does get_rpccred(), so we
don't need an operation pointer to know to do that.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:46 -05:00
NeilBrown 354698b7d4 SUNRPC: remove RPCAUTH_AUTH_NO_CRKEY_TIMEOUT
This is no longer used.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:45 -05:00
NeilBrown 8276c902bb SUNRPC: remove uid and gid from struct auth_cred
Use cred->fsuid and cred->fsgid instead.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:45 -05:00
NeilBrown fc0664fd9b SUNRPC: remove groupinfo from struct auth_cred.
We can use cred->groupinfo (from the 'struct cred') instead.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:45 -05:00
NeilBrown 97f68c6b02 SUNRPC: add 'struct cred *' to auth_cred and rpc_cred
The SUNRPC credential framework was put together before
Linux has 'struct cred'.  Now that we have it, it makes sense to
use it.
This first step just includes a suitable 'struct cred *' pointer
in every 'struct auth_cred' and almost every 'struct rpc_cred'.

The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing
else really makes sense.

For rpc_cred, the pointer is reference counted.
For auth_cred it isn't.  struct auth_cred are either allocated on
the stack, in which case the thread owns a reference to the auth,
or are part of 'struct generic_cred' in which case gc_base owns the
reference, and "acred" shares it.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19 13:52:44 -05:00
Trond Myklebust 331bc71cb1 SUNRPC: Convert the auth cred cache to use refcount_t
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-10-23 12:24:33 -04:00
Sargun Dhillon 82b98ca566 net/sunrpc: Make rpc_auth_create_args a const
This turns rpc_auth_create_args into a const as it gets passed through the
auth stack.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-07-30 13:19:41 -04:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kinglong Mee 5786461bd8 sunrpc: rename NFS_NGROUPS to UNX_NGROUPS for auth unix
NFS_NGROUPS has been move to sunrpc, rename to UNX_NGROUPS.

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-02-08 17:02:45 -05:00
Linus Torvalds c4a86165d1 NFS client updates for Linux 4.9
Highlights include:
 
 Stable bugfixes:
 - sunrpc: fix writ espace race causing stalls
 - NFS: Fix inode corruption in nfs_prime_dcache()
 - NFSv4: Don't report revoked delegations as valid in
   nfs_have_delegation()
 - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is
   invalid
 - NFSv4: Open state recovery must account for file permission changes
 - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
 
 Features:
 - Add support for tracking multiple layout types with an ordered list
 - Add support for using multiple backchannel threads on the client
 - Add support for pNFS file layout session trunking
 - Delay xprtrdma use of DMA API (for device driver removal)
 - Add support for xprtrdma remote invalidation
 - Add support for larger xprtrdma inline thresholds
 - Use a scatter/gather list for sending xprtrdma RPC calls
 - Add support for the CB_NOTIFY_LOCK callback
 - Improve hashing sunrpc auth_creds by using both uid and gid
 
 Bugfixes:
 - Fix xprtrdma use of DMA API
 - Validate filenames before adding to the dcache
 - Fix corruption of xdr->nwords in xdr_copy_to_scratch
 - Fix setting buffer length in xdr_set_next_buffer()
 - Don't deadlock the state manager on the SEQUENCE status flags
 - Various delegation and stateid related fixes
 - Retry operations if an interrupted slot receives EREMOTEIO
 - Make nfs boot time y2038 safe
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJX/+ZfAAoJENfLVL+wpUDr5MUP/16s2Kp9ZZZZ7ICi3yrHOzb0
 9WpCOmbKUIELXl8YgkxlvPUYMzTQTIc32TwbVgdFV0g41my/0+O3z3+IiTrUGxH5
 8LgouMWBZ9KKmyUB//+KQAXr3j/bvDdF6Li6wJfz8a2o+9xT4oTkK1+Js8p0kn6e
 HNKfRknfCKwvE+j4tPCLfs2RX5qDyBFILXwWhj1fAbmT3rbnp+QqkXD4mWUrXb9z
 DBgxciXRhOkOQQAD2KQBFd2kUqWDZ5ED23b+aYsu9D3VCW45zitBqQFAxkQWL0hp
 x8Mp+MDCxlgdEaGQPUmUiDtPkG1X9ZxUJCAwaJWWsZaItwR2Il+en2sETctnTZ1X
 0IAxZVFdolzSeLzIfNx3OG32JdWJdaNjUzkIZam8gO6i1f6PAmK4alR0J3CT31nJ
 /OEN76o1E7acGWRMmj+MAZ2U5gPfR7EitOzyE8ZUPcHgyeGMiynjwi56WIpeSvT2
 F/Sp5kRe5+D5gtnYuppGp7Srp5vYdtFaz1zgPDUKpDLcxfDweO8AHGjJf3Zmrunx
 X24yia4A14CnfcUy4vKpISXRykmkG/3Z0tpWwV53uXZm4nlQfRc7gPibiW7Ay521
 af8sDoItW98K3DK5NQU7IUn83ua1TStzpoqlAEafRw//g9zPMTbhHvNvOyrRfrcX
 kjWn6hNblMu9M34JOjtu
 =XOrF
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
 "Highlights include:

  Stable bugfixes:
   - sunrpc: fix writ espace race causing stalls
   - NFS: Fix inode corruption in nfs_prime_dcache()
   - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation()
   - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid
   - NFSv4: Open state recovery must account for file permission changes
   - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic

  Features:
   - Add support for tracking multiple layout types with an ordered list
   - Add support for using multiple backchannel threads on the client
   - Add support for pNFS file layout session trunking
   - Delay xprtrdma use of DMA API (for device driver removal)
   - Add support for xprtrdma remote invalidation
   - Add support for larger xprtrdma inline thresholds
   - Use a scatter/gather list for sending xprtrdma RPC calls
   - Add support for the CB_NOTIFY_LOCK callback
   - Improve hashing sunrpc auth_creds by using both uid and gid

  Bugfixes:
   - Fix xprtrdma use of DMA API
   - Validate filenames before adding to the dcache
   - Fix corruption of xdr->nwords in xdr_copy_to_scratch
   - Fix setting buffer length in xdr_set_next_buffer()
   - Don't deadlock the state manager on the SEQUENCE status flags
   - Various delegation and stateid related fixes
   - Retry operations if an interrupted slot receives EREMOTEIO
   - Make nfs boot time y2038 safe"

* tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits)
  NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic
  fs: nfs: Make nfs boot time y2038 safe
  sunrpc: replace generic auth_cred hash with auth-specific function
  sunrpc: add RPCSEC_GSS hash_cred() function
  sunrpc: add auth_unix hash_cred() function
  sunrpc: add generic_auth hash_cred() function
  sunrpc: add hash_cred() function to rpc_authops struct
  Retry operation on EREMOTEIO on an interrupted slot
  pNFS: Fix atime updates on pNFS clients
  sunrpc: queue work on system_power_efficient_wq
  NFSv4.1: Even if the stateid is OK, we may need to recover the open modes
  NFSv4: If recovery failed for a specific open stateid, then don't retry
  NFSv4: Fix retry issues with nfs41_test/free_stateid
  NFSv4: Open state recovery must account for file permission changes
  NFSv4: Mark the lock and open stateids as invalid after freeing them
  NFSv4: Don't test open_stateid unless it is set
  NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid
  NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation
  NFSv4: Fix a race when updating an open_stateid
  NFSv4: Fix a race in nfs_inode_reclaim_delegation()
  ...
2016-10-13 21:28:20 -07:00
Alexey Dobriyan 81243eacfa cred: simpler, 1D supplementary groups
Current supplementary groups code can massively overallocate memory and
is implemented in a way so that access to individual gid is done via 2D
array.

If number of gids is <= 32, memory allocation is more or less tolerable
(140/148 bytes).  But if it is not, code allocates full page (!)
regardless and, what's even more fun, doesn't reuse small 32-entry
array.

2D array means dependent shifts, loads and LEAs without possibility to
optimize them (gid is never known at compile time).

All of the above is unnecessary.  Switch to the usual
trailing-zero-len-array scheme.  Memory is allocated with
kmalloc/vmalloc() and only as much as needed.  Accesses become simpler
(LEA 8(gi,idx,4) or even without displacement).

Maximum number of gids is 65536 which translates to 256KB+8 bytes.  I
think kernel can handle such allocation.

On my usual desktop system with whole 9 (nine) aux groups, struct
group_info shrinks from 148 bytes to 44 bytes, yay!

Nice side effects:

 - "gi->gid[i]" is shorter than "GROUP_AT(gi, i)", less typing,

 - fix little mess in net/ipv4/ping.c
   should have been using GROUP_AT macro but this point becomes moot,

 - aux group allocation is persistent and should be accounted as such.

Link: http://lkml.kernel.org/r/20160817201927.GA2096@p183.telecom.by
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07 18:46:30 -07:00
Frank Sorenson 1e035d065f sunrpc: add auth_unix hash_cred() function
Add a hash_cred() function for auth_unix, using both the
uid and gid from the auth_cred.

Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-30 15:45:21 -04:00
Scott Mayhew ce52914eb7 sunrpc: move NO_CRKEY_TIMEOUT to the auth->au_flags
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag.  A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.

This can be reproduced as follows:

1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server.  Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys

2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m

3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set.  Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

5. Now do some I/O to the sec=sys mount.  This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1

6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client.  Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect.  Grabbing a new kerberos ticket at this
point will have no effect either.

Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags.  Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too.  Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-19 16:23:24 -04:00
Jeff Layton 3c6e0bc8a1 sunrpc: plumb gfp_t parm into crcreate operation
We need to be able to call the generic_cred creator from different
contexts. Add a gfp_t parm to the crcreate operation and to
rpcauth_lookup_credcache. For now, we just push the gfp_t parms up
one level to the *_lookup_cred functions.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-05-09 09:05:40 -04:00
Chuck Lever 4500632f60 nfsd: Lower NFSv4.1 callback message size limit
The maximum size of a backchannel message on RPC-over-RDMA depends
on the connection's inline threshold. Today that threshold is
typically 1024 bytes, making the maximum message size 996 bytes.

The Linux server's CREATE_SESSION operation checks that the size
of callback Calls can be as large as 1044 bytes, to accommodate
RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the
true message size maximum of 996 bytes.

But the server's backchannel currently does not support RPCSEC_GSS.
The actual maximum size it needs is much smaller. It is safe to
reduce the limit to enable NFSv4.1 on RDMA backchannel operation.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-03-01 13:06:35 -08:00
Jeff Layton 24a9a9610c sunrpc: increase UNX_MAXNODENAME from 32 to __NEW_UTS_LEN bytes
The current limit of 32 bytes artificially limits the name string that
we end up stuffing into NFSv4.x client ID blobs. If you have multiple
hosts with long hostnames that only differ near the end, then this can
cause NFSv4 client ID collisions.

Linux nodenames are actually limited to __NEW_UTS_LEN bytes (64), so use
that as the limit instead. Also, use XDR_QUADLEN to specify the slack
length, just for clarity and in case someone in the future changes this
to something not evenly divisible by 4.

Reported-by: Michael Skralivetsky <michael.skralivetsky@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-08-12 14:31:04 -04:00
Jeff Layton f895b252d4 sunrpc: eliminate RPC_DEBUG
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 17:31:46 -05:00
Andy Adamson 35fa5f7b35 SUNRPC refactor rpcauth_checkverf error returns
Most of the time an error from the credops crvalidate function means the
server has sent us a garbage verifier. The gss_validate function is the
exception where there is an -EACCES case if the user GSS_context on the client
has expired.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-09-03 15:25:09 -04:00
Trond Myklebust c219066103 SUNRPC: Replace clnt->cl_principal
The clnt->cl_principal is being used exclusively to store the service
target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that
is stored only in the RPCSEC_GSS-specific code.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30 09:19:36 -04:00
Eric W. Biederman a570abbb96 sunrpc: Properly encode kuids and kgids in RPC_AUTH_UNIX credentials
When writing kuids onto the wire first map them into the initial user
namespace.

When writing kgids onto the wire first map them into the initial user
namespace.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:24 -08:00
Eric W. Biederman e572fc7398 sunrpc: Use gid_valid to test for gid != INVALID_GID
In auth unix there are a couple of places INVALID_GID is used a
sentinel to mark the end of uc_gids array.  Use gid_valid
as a type safe way to verify we have not hit the end of
valid data in the array.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:20 -08:00
Eric W. Biederman cdba321e29 sunrpc: Convert kuids and kgids to uids and gids for printing
When printing kuids and kgids for debugging purpropses convert them
to ordinary integers so their values can be fed to the oridnary
print functions.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:19 -08:00
Eric W. Biederman 9132adb021 sunrpc: Simplify auth_unix now that everything is a kgid_t
In unx_create_cred directly assign gids from acred->group_info
to cred->uc_gids.

In unx_match directly compare uc_gids with group_info.

Now that both group_info and unx_cred gids are stored as kgids
this is valid and the extra layer of translation can be removed.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:18 -08:00
Eric W. Biederman 0b4d51b02a sunrpc: Use uid_eq and gid_eq where appropriate
When comparing uids use uid_eq instead of ==.
When comparing gids use gid_eq instead of ==.

And unfortunate cost of type safety.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:17 -08:00
Eric W. Biederman 7eaf040b72 sunrpc: Use kuid_t and kgid_t where appropriate
Convert variables that store uids and gids to be of type
kuid_t and kgid_t instead of type uid_t and gid_t.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:16 -08:00
Eric W. Biederman bf37f79437 sunrpc: Use userns friendly constants.
Instead of (uid_t)0 use GLOBAL_ROOT_UID.
Instead of (gid_t)0 use GLOBAL_ROOT_GID.
Instead of (uid_t)-1 use INVALID_UID
Instead of (gid_t)-1 use INVALID_GID.
Instead of NOGROUP use INVALID_GID.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:15 -08:00
Eric W. Biederman ae2975bc34 userns: Convert group_info values from gid_t to kgid_t.
As a first step to converting struct cred to be all kuid_t and kgid_t
values convert the group values stored in group_info to always be
kgid_t values.   Unless user namespaces are used this change should
have no effect.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-05-03 03:27:21 -07:00
NeilBrown dc6f55e9f8 NFS/sunrpc: don't use a credential with extra groups.
The sunrpc layer keeps a cache of recently used credentials and
'unx_match' is used to find the credential which matches the current
process.

However unx_match allows a match when the cached credential has extra
groups at the end of uc_gids list which are not in the process group list.

So if a process with a list of (say) 4 group accesses a file and gains
access because of the last group in the list, then another process
with the same uid and gid, and a gid list being the first tree of the
gids of the original process tries to access the file, it will be
granted access even though it shouldn't as the wrong rpc credential
will be used.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
2011-10-25 11:20:58 +02:00
Trond Myklebust a17c2153d2 SUNRPC: Move the bound cred to struct rpc_rqst
This will allow us to save the original generic cred in rpc_message, so
that if we migrate from one server to another, we can generate a new bound
cred without having to punt back to the NFS layer.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04 08:54:09 -04:00
Trond Myklebust 5d8d9a4d9f NFS: Ensure the AUTH_UNIX credcache is allocated dynamically
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04 08:52:57 -04:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Trond Myklebust 0f38b873ae SUNRPC: Use GFP_NOFS when allocating credentials
Since the credentials may be allocated during the call to rpc_new_task(),
which again may be called by a memory allocator...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-07-09 12:08:48 -04:00
Trond Myklebust 78ea323be6 NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()
With the recent change to generic creds, we can no longer use
cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and
AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name
instead...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19 16:54:53 -04:00
Trond Myklebust 5c691044ec SUNRPC: Add an rpc_credop callback for binding a credential to an rpc_task
We need the ability to treat 'generic' creds specially, since they want to
bind instances of the auth cred instead of binding themselves.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14 13:42:41 -04:00
Trond Myklebust af09383577 SUNRPC: Fix RPCAUTH_LOOKUP_ROOTCREDS
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS
authentication, and then only as a special case in the code. This patch
removes the auth_sys special casing, and replaces it with generic code.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14 13:42:32 -04:00
Trond Myklebust 1be27f3660 SUNRPC: Remove the tk_auth macro...
We should almost always be deferencing the rpc_auth struct by means of the
credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up
that historical mistake, and remove the macro that propagated it.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:37 -04:00
Trond Myklebust f5c2187cfe SUNRPC: Convert the credential garbage collector into a shrinker callback
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust 9499b4341b SUNRPC: Give credential cache a local spinlock
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust 31be5bf15f SUNRPC: Convert the credcache lookup code to use RCU
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:36 -04:00
Trond Myklebust fc432dd907 SUNRPC: Enforce atomic updates of rpc_cred->cr_flags
Convert to the use of atomic bitops...

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:35 -04:00
Trond Myklebust 696e38df9d SUNRPC: replace casts in auth_unix.c with container_of()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10 23:40:35 -04:00