Граф коммитов

771 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 5f4f0c4d3f compat_blkdev_driver_ioctl: Remove unused variable warning
Variable 'ret' is no longer used. Don't declare it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23 10:28:25 -07:00
Alexey Dobriyan 31d85ab28e proc: move /proc/diskstats boilerplate to block/genhd.c
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-23 17:57:37 +04:00
Alexey Dobriyan f500975a3f proc: move rest of /proc/partitions code to block/genhd.c
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-23 15:07:31 +04:00
Al Viro 56b26add02 [PATCH] kill the rest of struct file propagation in block ioctls
Now we can switch blkdev_ioctl() block_device/mode

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:14 -04:00
Al Viro 6af3a56e1d [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
We need to do bd_claim() only if file hadn't been opened with O_EXCL
and then we have no need to use file itself as owner.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:12 -04:00
Al Viro 45048d0961 [PATCH] get rid of blkdev_locked_ioctl()
Most of that stuff doesn't need BKL at all; expand in the (only) caller,
merge the switch into one there and leave BKL only around the stuff that
might actually need it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:10 -04:00
Al Viro e436fdae70 [PATCH] get rid of blkdev_driver_ioctl()
convert remaining callers to __blkdev_driver_ioctl()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:49:08 -04:00
Al Viro 33c2dca495 [PATCH] trim file propagation in block/compat_ioctl.c
... and remove the handling of cases when it falls back to native
without changing arguments.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:54 -04:00
Al Viro 90b8f2824c [PATCH] end of methods switch: remove the old ones
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:48:52 -04:00
Al Viro d4430d62fa [PATCH] beginning of methods conversion
To keep the size of changesets sane we split the switch by drivers;
to keep the damn thing bisectable we do the following:
	1) rename the affected methods, add ones with correct
prototypes, make (few) callers handle both.  That's this changeset.
	2) for each driver convert to new methods.  *ALL* drivers
are converted in this series.
	3) kill the old (renamed) methods.

Note that it _is_ a flagday; all in-tree drivers are converted and by the
end of this series no trace of old methods remain.  The only reason why
we do that this way is to keep the damn thing bisectable and allow per-driver
debugging if anything goes wrong.

New methods:
	open(bdev, mode)
	release(disk, mode)
	ioctl(bdev, mode, cmd, arg)		/* Called without BKL */
	compat_ioctl(bdev, mode, cmd, arg)
	locked_ioctl(bdev, mode, cmd, arg)	/* Called with BKL, legacy */

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:32 -04:00
Al Viro 633a08b812 [PATCH] introduce __blkdev_driver_ioctl()
Analog of blkdev_driver_ioctl() with sane arguments.  For
now uses fake struct file, by the end of the series it won't
and blkdev_driver_ioctl() will become a wrapper around it.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:26 -04:00
Al Viro 74f3c8aff3 [PATCH] switch scsi_cmd_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:14 -04:00
Al Viro e915e872ed [PATCH] switch sg_scsi_ioctl() to passing fmode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:12 -04:00
Al Viro 5842e51ff2 [PATCH] pass mode instead of file to sg_io()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:10 -04:00
Al Viro aeb5d72706 [PATCH] introduce fmode_t, do annotations
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21 07:47:06 -04:00
Linus Torvalds c53dbf5486 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: remove __generic_unplug_device() from exports
  block: move q->unplug_work initialization
  blktrace: pass zfcp driver data
  blktrace: add support for driver data
  block: fix current kernel-doc warnings
  block: only call ->request_fn when the queue is not stopped
  block: simplify string handling in elv_iosched_store()
  block: fix kernel-doc for blk_alloc_devt()
  block: fix nr_phys_segments miscalculation bug
  block: add partition attribute for partition number
  block: add BIG FAT WARNING to CONFIG_DEBUG_BLOCK_EXT_DEVT
  softirq: Add support for triggering softirq work on softirqs.
2008-10-17 09:29:55 -07:00
Linus Torvalds ed09441dac Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n
  libiscsi: fix locking in iscsi_eh_device_reset
  libiscsi: check reason why we are stopping iscsi session to determine error value
  [SCSI] iscsi_tcp: return a descriptive error value during connection errors
  [SCSI] libiscsi: rename host reset to target reset
  [SCSI] iscsi class: fix endpoint id handling
  [SCSI] libiscsi: Support drivers initiating session removal
  [SCSI] libiscsi: fix data corruption when target has to resend data-in packets
  [SCSI] sd: Switch kernel printing level for DIF messages
  [SCSI] sd: Correctly handle all combinations of DIF and DIX
  [SCSI] sd: Always print actual protection_type
  [SCSI] sd: Issue correct protection operation
  [SCSI] scsi_error: fix target reset handling
  [SCSI] lpfc 8.2.8 v2 : Add statistical reporting control and additional fc vendor events
  [SCSI] lpfc 8.2.8 v2 : Add sysfs control of target queue depth handling
  [SCSI] lpfc 8.2.8 v2 : Revert target busy in favor of transport disrupted
  [SCSI] scsi_dh_alua: remove REQ_NOMERGE
  [SCSI] lpfc 8.2.8 : update driver version to 8.2.8
  [SCSI] lpfc 8.2.8 : Add MSI-X support
  [SCSI] lpfc 8.2.8 : Update driver to use new Host byte error code DID_TRANSPORT_DISRUPTED
  ...
2008-10-17 09:00:23 -07:00
Jens Axboe f73e2d13a1 block: remove __generic_unplug_device() from exports
The only out-of-core user is IDE, and that should be using
blk_start_queueing() instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 14:03:08 +02:00
Peter Zijlstra 713ada9ba9 block: move q->unplug_work initialization
modprobe loop; rmmod loop effectively creates a blk_queue and destroys it
which results in q->unplug_work being canceled without it ever being
initialized.

Therefore, move the initialization of q->unplug_work from
blk_queue_make_request() to blk_alloc_queue*().

Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Randy Dunlap 496aa8a98f block: fix current kernel-doc warnings
Fix block kernel-doc warnings:

Warning(linux-2.6.27-git4//fs/block_dev.c:1272): No description found for parameter 'path'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'cpu'
Warning(linux-2.6.27-git4//block/blk-core.c:1021): No description found for parameter 'part'
Warning(/var/linsrc/linux-2.6.27-git4//block/genhd.c:544): No description found for parameter 'partno'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Jens Axboe 80a4b58e36 block: only call ->request_fn when the queue is not stopped
Callers should use either blk_run_queue/__blk_run_queue, or
blk_start_queueing() to invoke request handling instead of calling
->request_fn() directly as that does not take the queue stopped
flag into account.

Also add appropriate comments on the above functions to detail
their usage.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Li Zefan ee2e992cc2 block: simplify string handling in elv_iosched_store()
strlcpy() guarantees the dest buffer is NULL teminated.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:57 +02:00
Li Zefan e6d63840ba block: fix kernel-doc for blk_alloc_devt()
No argument 'gfp_mask' for blk_alloc_devt().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:56 +02:00
FUJITA Tomonori 8677142710 block: fix nr_phys_segments miscalculation bug
This fixes the bug reported by Nikanth Karthikesan <knikanth@suse.de>:

http://lkml.org/lkml/2008/10/2/203

The root cause of the bug is that blk_phys_contig_segment
miscalculates q->max_segment_size.

blk_phys_contig_segment checks:

req->biotail->bi_size + next_req->bio->bi_size > q->max_segment_size

But blk_recalc_rq_segments might expect that req->biotail and the
previous bio in the req are supposed be merged into one
segment. blk_recalc_rq_segments might also expect that next_req->bio
and the next bio in the next_req are supposed be merged into one
segment. In such case, we merge two requests that can't be merged
here. Later, blk_rq_map_sg gives more segments than it should.

We need to keep track of segment size in blk_recalc_rq_segments and
use it to see if two requests can be merged. This patch implements it
in the similar way that we used to do for hw merging (virtual
merging).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-17 08:46:56 +02:00
Greg Kroah-Hartman 1ff9f542e5 device create: block: convert device_create_drvdata to device_create
Now that device_create() has been audited, rename things back to the
original call to be sane.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16 09:24:41 -07:00
Mike Christie 6000a368cd [SCSI] block: separate failfast into multiple bits.
Multipath is best at handling transport errors. If it gets a device
error then there is not much the multipath layer can do. It will just
access the same device but from a different path.

This patch breaks up failfast into device, transport and driver errors.
The multipath layers (md and dm mutlipath) only ask the lower levels to
fast fail transport errors. The user of failfast, read ahead, will ask
to fast fail on all errors.

Note that blk_noretry_request will return true if any failfast bit
is set. This allows drivers that do not support the multipath failfast
bits to continue to fail on any failfast error like before. Drivers
like scsi that are able to fail fast specific errors can check
for the specific fail fast type. In the next patch I will convert
scsi.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 09:28:52 -04:00
Martin K. Petersen ad7fce9314 block: Switch blk_integrity_compare from bdev to gendisk
The DM and MD integrity support now depends on being able to use
gendisks instead of block_devices when comparing integrity profiles.
Change function parameters accordingly.

Also update comparison logic so that two NULL profiles are a valid
configuration.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:21 +02:00
Martin K. Petersen 0c032ab889 block: Fix double put in blk_integrity_unregister
- kobject_del already puts the parent.

 - Set integrity profile to NULL to prevent stale data.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:21 +02:00
Kiyoshi Ueda d00e29fd99 block: remove end_{queued|dequeued}_request()
This patch removes end_queued_request() and end_dequeued_request(),
which are no longer used.

As a results, users of __end_request() became only end_request().
So the actual code in __end_request() is moved to end_request()
and __end_request() is removed.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:21 +02:00
Kiyoshi Ueda 99cd3386f2 block: change elevator to use __blk_end_request()
This patch converts elevator to use __blk_end_request() directly
so that end_{queued|dequeued}_request() can be removed.
Related 'uptodate' arguments is converted to 'error'.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:21 +02:00
Jens Axboe 0497b345e7 blktrace: use BLKTRACE_BDEV_SIZE as the name size for setup structure
Define as 32, which is is what BDEVNAME_SIZE is/was as well. This keeps
the user interface the same and gets rid of the difference between
kernel and user api here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Kiyoshi Ueda ef9e3facdf block: add lld busy state exporting interface
This patch adds an new interface, blk_lld_busy(), to check lld's
busy state from the block layer.
blk_lld_busy() calls down into low-level drivers for the checking
if the drivers set q->lld_busy_fn() using blk_queue_lld_busy().

This resolves a performance problem on request stacking devices below.

Some drivers like scsi mid layer stop dispatching request when
they detect busy state on its low-level device like host/target/device.
It allows other requests to stay in the I/O scheduler's queue
for a chance of merging.

Request stacking drivers like request-based dm should follow
the same logic.
However, there is no generic interface for the stacked device
to check if the underlying device(s) are busy.
If the request stacking driver dispatches and submits requests to
the busy underlying device, the requests will stay in
the underlying device's queue without a chance of merging.
This causes performance problem on burst I/O load.

With this patch, busy state of the underlying device is exported
via q->lld_busy_fn().  So the request stacking driver can check it
and stop dispatching requests if busy.

The underlying device driver must return the busy state appropriately:
    1: when the device driver can't process requests immediately.
    0: when the device driver can process requests immediately,
       including abnormal situations where the device driver needs
       to kill all requests.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Elias Oltmanns 336c3d8ce7 block: Fix blk_start_queueing() to not kick a stopped queue
blk_start_queueing() should act like the generic queue unplugging
and kicking and ignore a stopped queue. Such a queue may not be
run until after a call to blk_start_queue().

Signed-off-by: Elias Oltmanns <eo@nebensachen.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:20 +02:00
Jens Axboe e3ba9ae58a block: reserve some tags just for sync IO
By only allowing async IO to consume 3/4 ths of the tag depth, we
always have slots free to serve sync IO. This is important to avoid
having writes fill the entire tag queue, thus starving reads.

Original patch and idea from Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Jens Axboe f7d7b7a7a3 block: as/cfq ssd idle check update
We really need to know about the hardware tagging support as well,
since if the SSD does not do tagging then we still want to idle.
Otherwise have the same dependent sync IO vs flooding async IO
problem as on rotational media.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Jens Axboe a68bbddba4 block: add queue flag for SSD/non-rotational devices
We don't want to idle in AS/CFQ if the device doesn't have a seek
penalty. So add a QUEUE_FLAG_NONROT to indicate a non-rotational
device, low level drivers should set this flag upon discovery of
an SSD or similar device type.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:19 +02:00
Kiyoshi Ueda 4ee5eaf451 block: add a queue flag for request stacking support
This patch adds a queue flag to indicate the block device can be
used for request stacking.

Request stacking drivers need to stack their devices on top of
only devices of which q->request_fn is functional.
Since bio stacking drivers (e.g. md, loop) basically initialize
their queue using blk_alloc_queue() and don't set q->request_fn,
the check of (q->request_fn == NULL) looks enough for that purpose.

However, dm will become both types of stacking driver (bio-based and
request-based).  And dm will always set q->request_fn even if the dm
device is bio-based of which q->request_fn is not functional actually.
So we need something else to distinguish the type of the device.
Adding a queue flag is a solution for that.

The reason why dm always sets q->request_fn is to keep
the compatibility of dm user-space tools.
Currently, all dm user-space tools are using bio-based dm without
specifying the type of the dm device they use.
To use request-based dm without changing such tools, the kernel
must decide the type of the dm device automatically.
The automatic type decision can't be done at the device creation time
and needs to be deferred until such tools load a mapping table,
since the actual type is decided by dm target type included in
the mapping table.

So a dm device has to be initialized using blk_init_queue()
so that we can load either type of table.
Then, all queue stuffs are set (e.g. q->request_fn) and we have
no element to distinguish that it is bio-based or request-based,
even after a table is loaded and the type of the device is decided.

By the way, some stuffs of the queue (e.g. request_list, elevator)
are needless when the dm device is used as bio-based.
But the memory size is not so large (about 20[KB] per queue on ia64),
so I hope the memory loss can be acceptable for bio-based dm users.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Kiyoshi Ueda 82124d6035 block: add request submission interface
This patch adds blk_insert_cloned_request(), a generic request
submission interface for request stacking drivers.
Request-based dm will use it to submit their clones to underlying
devices.

blk_rq_check_limits() is also added because it is possible that
the lower queue has stronger limitations than the upper queue
if multiple drivers are stacking at request-level.
Not only for blk_insert_cloned_request()'s internal use, the function
will be used by request-based dm when the queue limitation is
modified (e.g. by replacing dm's table).

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Kiyoshi Ueda 32fab448e5 block: add request update interface
This patch adds blk_update_request(), which updates struct request
with completing its data part, but doesn't complete the struct
request itself.
Though it looks like end_that_request_first() of older kernels,
blk_update_request() should be used only by request stacking drivers.

Request-based dm will use it in bio->bi_end_io callback to update
the original request when a data part of a cloned request completes.
Followings are additional background information of why request-based
dm needs this interface.

  - Request stacking drivers can't use blk_end_request() directly from
    the lower driver's completion context (bio->bi_end_io or rq->end_io),
    because some device drivers (e.g. ide) may try to complete
    their request with queue lock held, and it may cause deadlock.
    See below for detailed description of possible deadlock:
    <http://marc.info/?l=linux-kernel&m=120311479108569&w=2>

  - To solve that, request-based dm offloads the completion of
    cloned struct request to softirq context (i.e. using
    blk_complete_request() from rq->end_io).

  - Though it is possible to use the same solution from bio->bi_end_io,
    it will delay the notification of bio completion to the original
    submitter.  Also, it will cause inefficient partial completion,
    because the lower driver can't perform the cloned request anymore
    and request-based dm needs to requeue and redispatch it to
    the lower driver again later.  That's not good.

  - So request-based dm needs blk_update_request() to perform the bio
    completion in the lower driver's completion context, which is more
    efficient.

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Jens Axboe e3335de940 block: blk_cleanup_queue() should call blk_sync_queue()
When a driver calls blk_cleanup_queue(), the device should be fully idle.
However, the block layer may have pending plugging timers and the IO
schedulers may have pending work in the work queues. So quisce the device
by waiting for the timer and flushing the work queues.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:18 +02:00
Jens Axboe 7ba1fbaa4a block: use rq complete marking in blk_abort_request()
We cannot abort a request if we raced with the timeout handler already,
or with the IO completion. So make blk_abort_request() mark the request
as complete, and only continue if we succeeded.

Found and suggested by Mike Anderson <andmike@linux.vnet.ibm.com>

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:17 +02:00
Jens Axboe 581d4e28d9 block: add fault injection mechanism for faking request timeouts
Only works for the generic request timer handling. Allows one to
sporadically ignore request completions, thus exercising the timeout
handling.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:17 +02:00
Hugh Dickins 3e6053d76d block: adjust blkdev_issue_discard for swap
Two mods to blkdev_issue_discard(), thinking ahead to its use on swap:

1. Add gfp_mask argument, so swap allocation can use it where GFP_KERNEL
   might deadlock but GFP_NOIO is safe.

2. Enlarge nr_sects argument from unsigned to sector_t: unsigned long is
   enough to cover a whole swap area, but sector_t suits any partition.

Change sb_issue_discard()'s nr_blocks to sector_t too; but no need seen
for a gfp_mask there, just pass GFP_KERNEL down to blkdev_issue_discard().

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:17 +02:00
Mike Anderson 11914a53d2 block: Add interface to abort queued requests
Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:13 +02:00
Jens Axboe 242f9dcb8b block: unify request timeout handling
Right now SCSI and others do their own command timeout handling.
Move those bits to the block layer.

Instead of having a timer per command, we try to be a bit more clever
and simply have one per-queue. This avoids the overhead of having to
tear down and setup a timer for each command, so it will result in a lot
less timer fiddling.

Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:13 +02:00
Tejun Heo 243294dae0 block: fix duplicate headers for /proc/partitions
seqf can be started multiple times for a read and the header should be
printed only for the initial one.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:12 +02:00
FUJITA Tomonori 818827669d block: make blk_rq_map_user take a NULL user-space buffer
This patch changes blk_rq_map_user to accept a NULL user-space buffer
with a READ command if rq_map_data is not NULL. Thus a caller can pass
page frames to lk_rq_map_user to just set up a request and bios with
page frames propely. bio_uncopy_user (called via blk_rq_unmap_user)
doesn't copy data to user space with such request.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Jens Axboe 839e96afba block: update comment on end_request()
It refers to functions that no longer exist after the IO completion
changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Tejun Heo 2bbedcb4c1 block: don't test for partition size in bdget_disk() and blk_lookup_devt()
bdget_disk() and blk_lookup_devt() never cared whether the specified
partition (or disk) is zero sized or not.  I got confused while
converting those not to depend on consecutive minor numbers in commit
5a6411b1178baf534aa9138052864dfa89d3eada and later when dev0 was added
it broke callers which expected to get valid return for zero sized
disk devices.

So, they never needed nr_sects checks in the first place.  Kill them.

This problem was spotted and debugged by Bartlmoiej Zolnierkiewicz.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
Harvey Harrison aeb3d3a81e block: kmalloc args reversed, small function definition fixes
Noticed by sparse:
block/blk-softirq.c:156:12: warning: symbol 'blk_softirq_init' was not declared. Should it be static?
block/genhd.c:583:28: warning: function 'bdget_disk' with external linkage has definition
block/genhd.c:659:17: warning: incorrect type in argument 1 (different base types)
block/genhd.c:659:17:    expected unsigned int [unsigned] [usertype] size
block/genhd.c:659:17:    got restricted gfp_t
block/genhd.c:659:29: warning: incorrect type in argument 2 (different base types)
block/genhd.c:659:29:    expected restricted gfp_t [usertype] flags
block/genhd.c:659:29:    got unsigned int
block: kmalloc args reversed

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
FUJITA Tomonori 879040742c block: add blk_rq_aligned helper function
This adds blk_rq_aligned helper function to see if alignment and
padding requirement is satisfied for DMA transfer. This also converts
blk_rq_map_kern and __blk_rq_map_user to use the helper function.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:11 +02:00
FUJITA Tomonori 152e283fdf block: introduce struct rq_map_data to use reserved pages
This patch introduces struct rq_map_data to enable bio_copy_use_iov()
use reserved pages.

Currently, bio_copy_user_iov allocates bounce pages but
drivers/scsi/sg.c wants to allocate pages by itself and use
them. struct rq_map_data can be used to pass allocated pages to
bio_copy_user_iov.

The current users of bio_copy_user_iov simply passes NULL (they don't
want to use pre-allocated pages).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:10 +02:00
FUJITA Tomonori a3bce90edd block: add gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov
Currently, blk_rq_map_user and blk_rq_map_user_iov always do
GFP_KERNEL allocation.

This adds gfp_mask argument to blk_rq_map_user and blk_rq_map_user_iov
so sg can use it (sg always does GFP_ATOMIC allocation).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:10 +02:00
Aaron Carroll 45333d5a31 cfq-iosched: fix queue depth detection
CFQ's detection of queueing devices assumes a non-queuing device and detects
if the queue depth reaches a certain threshold.  Under some workloads (e.g.
synchronous reads), CFQ effectively forces a unit queue depth, thus defeating
the detection logic.  This leads to poor performance on queuing hardware,
since the idle window remains enabled.

This patch inverts the sense of the logic: assume a queuing-capable device,
and detect if the depth does not exceed the threshold.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe 605401618c block: don't use bio_has_data() in the completion path
We should just check for rq->bio, as that is really the information
we are looking for. Even if the bio attached doesn't carry data,
we still need to do IO post processing on it.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe ab780f1ece block: inherit CPU completion on bio->rq and rq->rq merges
Somewhat incomplete, as we do allow merges of requests and bios
that have different completion CPUs given. This is done on the
assumption that a larger IO is still more beneficial than CPU
locality.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe c7c22e4d5c block: add support for IO CPU affinity
This patch adds support for controlling the IO completion CPU of
either all requests on a queue, or on a per-request basis. We export
a sysfs variable (rq_affinity) which, if set, migrates completions
of requests to the CPU that originally submitted it. A bio helper
(bio_set_completion_cpu()) is also added, so that queuers can ask
for completion on that specific CPU.

In testing, this has been show to cut the system time by as much
as 20-40% on synthetic workloads where CPU affinity is desired.

This requires a little help from the architecture, so it'll only
work as designed for archs that are using the new generic smp
helper infrastructure.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe 18887ad910 block: make kblockd_schedule_work() take the queue as parameter
Preparatory patch for checking queuing affinity.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe b646fc59b3 block: split softirq handling into blk-softirq.c
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Jens Axboe 0835da67c1 block: use linux/uaccess.h in elevator.c instead of asm variant
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:09 +02:00
Tejun Heo 3e1a7ff8a0 block: allow disk to have extended device number
Now that disk and partition handlings are mostly unified, it's easy to
allow disk to have extended device number.  This patch makes
add_disk() use extended device number if disk->minors is zero.  Both
sd and ide-disk are updated to use this.

* sd_format_disk_name() is implemented which can generically determine
  the drive name.  This removes disk number restriction stemming from
  limited device names.

* If sd index goes over SD_MAX_DISKS (which can be increased now BTW),
  sd simply doesn't initialize minors letting block layer choose
  extended device number.

* If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set
  minors to 0 and use extended device numbers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 689d6fac40 block: replace @ext_minors with GENHD_FL_EXT_DEVT
With previous changes, it's meaningless to limit the number of
partitions.  Replace @ext_minors with GENHD_FL_EXT_DEVT such that
setting the flag allows the disk to have maximum number of allowed
partitions (only limited by the number of entries in parsed_partitions
as determined by MAX_PART constant).

This kills not-too-pretty alloc_disk_ext[_node]() functions and makes
@minors parameter to alloc_disk[_node]() unnecessary.  The parameter
is left alone to avoid disturbing the users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 540eed5637 block: make partition array dynamic
disk->__part used to be statically allocated to the maximum possible
number of partitions.  This patch makes partition array allocation
dynamic.  The added overhead is minimal as only real change is one
memory dereference changed to RCU one.  This saves both a bit of
memory and cpu cycles iterating through unoccupied slots and makes
increasing partition limit easier.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 074a7aca7a block: move stats from disk to part0
Move stats related fields - stamp, in_flight, dkstats - from disk to
part0 and unify stat handling such that...

* part_stat_*() now updates part0 together if the specified partition
  is not part0.  ie. part_stat_*() are now essentially all_stat_*().

* {disk|all}_stat_*() are gone.

* part_round_stats() is updated similary.  It handles part0 stats
  automatically and disk_round_stats() is killed.

* part_{inc|dec}_in_fligh() is implemented which automatically updates
  part0 stats for parts other than part0.

* disk_map_sector_rcu() is updated to return part0 if no part matches.
  Combined with the above changes, this makes NULL special case
  handling in callers unnecessary.

* Separate stats show code paths for disk are collapsed into part
  stats show code paths.

* Rename disk_stat_lock/unlock() to part_stat_lock/unlock()

While at it, reposition stat handling macros a bit and add missing
parentheses around macro parameters.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo eddb2e26b5 block: kill GENHD_FL_FAIL and use part0->make_it_fail
GENHD_FL_FAIL for disk is what make_it_fail is for parts.  Kill it and
use part0->make_it_fail.  Sysfs node handling is unified too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 0762b8bde9 block: always set bdev->bd_part
Till now, bdev->bd_part is set only if the bdev was for parts other
than part0.  This patch makes bdev->bd_part always set so that code
paths don't have to differenciate common handling.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo 4c46501d16 block: move holder_dir from disk to part0
Move disk->holder_dir to part0->holder_dir.  Kill now mostly
superflous bdev_get_holder().

While at it, kill superflous kobject_get/put() around holder_dir,
slave_dir and cmd_filter creation and collapse
disk_sysfs_add_subdirs() into register_disk().  These serve no purpose
but obfuscating the code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:08 +02:00
Tejun Heo b7db9956e5 block: move policy from disk to part0
Move disk->policy to part0->policy.  Implement and use get_disk_ro().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Tejun Heo e561052149 block: unify sysfs size node handling
Now that capacity and __dev are moved to part0, part0 and others can
share the same method.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Tejun Heo 548b10eb29 block: move __dev from disk to part0
Move disk->__dev to part0->__dev.  This simplifies bdget_disk() and
lookup_devt() and allows common sysfs attributes to be unified.
part_to_disk() is updated to handle part0 -> disk.

Updated to include a fix from Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
he writes:

"part0 is a "special" partition and doesn't need to have capacity set - this
fixes regression caused by "block: move __dev from disk to part0" commit."

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Tejun Heo b5d0b9df0b block: introduce partition 0
genhd and partition code handled disk and partitions separately.  All
information about the whole disk was in struct genhd and partitions in
struct hd_struct.  However, the whole disk (part0) and other
partitions have a lot in common and the data structures end up having
good number of common fields and thus separate code paths doing the
same thing.  Also, the partition array was indexed by partno - 1 which
gets pretty confusing at times.

This patch introduces partition 0 and makes the partition array
indexed by partno.  Following patches will unify the handling of disk
and parts piece-by-piece.

This patch also implements disk_partitionable() which tests whether a
disk is partitionable.  With coming dynamic partition array change,
the most common usage of disk_max_parts() will be testing whether a
disk is partitionable and the number of max partitions will become
much less important.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Tejun Heo ed9e198234 block: implement and use {disk|part}_to_dev()
Implement {disk|part}_to_dev() and use them to access generic device
instead of directly dereferencing {disk|part}->dev.  To make sure no
user is left behind, rename generic devices fields to __dev.

This is in preparation of unifying partition 0 handling with other
partitions.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:07 +02:00
Tejun Heo 870d665612 block: implement CONFIG_DEBUG_BLOCK_EXT_DEVT
Extended devt introduces non-contiguos device numbers.  This patch
implements a debug option which forces most devt allocations to be
from the extended area and spreads them out.  This is enabled by
default if DEBUG_KERNEL is set and achieves...

1. Detects code paths in kernel or userland which expect predetermined
   consecutive device numbers.

2. When something goes wrong, avoid corruption as adding to the minor
   of earlier partition won't lead to the wrong but valid device.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo 1f0142905d block: adjust formatting for large minors and add ext_range sysfs attr
With extended minors and the soon-to-follow debug feature, large minor
numbers for block devices will be common.  This patch does the
followings to make printouts pretty.

* Adapt print formats such that large minors don't break the
  formatting.

* For extended MAJ:MIN, %02x%02x for MAJ:MIN used in
  printk_all_partitions() doesn't cut it anymore.  Update it such that
  %03x:%05x is used if either MAJ or MIN doesn't fit in %02x.

* Implement ext_range sysfs attribute which shows total minors the
  device can use including both conventional minor space and the
  extended one.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo bcce3de1be block: implement extended dev numbers
Implement extended device numbers.  A block driver can tell block
layer that it wants to use extended device numbers.  After the usual
minor space is used up, block layer automatically allocates devt's
from EXT_BLOCK_MAJOR.

Currently only one major number is allocated for this but as the
allocation is strictly on-demand, ~1mil minor space under it should
suffice unless the system actually has more than ~1mil partitions and
if that ever happens adding more majors to the extended devt area is
easy.

Due to internal implementation issues, the first partition can't be
allocated on the extended area.  In other words, genhd->minors should
at least be 1.  This limitation will be lifted by later changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo c995905916 block: fix diskstats access
There are two variants of stat functions - ones prefixed with double
underbars which don't care about preemption and ones without which
disable preemption before manipulating per-cpu counters.  It's unclear
whether the underbarred ones assume that preemtion is disabled on
entry as some callers don't do that.

This patch unifies diskstats access by implementing disk_stat_lock()
and disk_stat_unlock() which take care of both RCU (for partition
access) and preemption (for per-cpu counter access).  diskstats access
should always be enclosed between the two functions.  As such, there's
no need for the versions which disables preemption.  They're removed
and double underbars ones are renamed to drop the underbars.  As an
extra argument is added, there's no danger of using the old version
unconverted.

disk_stat_lock() uses get_cpu() and returns the cpu index and all
diskstat functions which access per-cpu counters now has @cpu
argument to help RT.

This change adds RCU or preemption operations at some places but also
collapses several preemption ops into one at others.  Overall, the
performance difference should be negligible as all involved ops are
very lightweight per-cpu ones.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo e71bf0d0ee block: fix disk->part[] dereferencing race
disk->part[] is protected by its matching bdev's lock.  However,
non-critical accesses like collecting stats and printing out sysfs and
proc information used to be performed without any locking.  As
partitions can come and go dynamically, partitions can go away
underneath those non-critical accesses.  As some of those accesses are
writes, this theoretically can lead to silent corruption.

This patch fixes the race by using RCU for the partition array and dev
reference counter to hold partitions.

* Rename disk->part[] to disk->__part[] to make sure no one outside
  genhd layer proper accesses it directly.

* Use RCU for disk->__part[] dereferencing.

* Implement disk_{get|put}_part() which can be used to get and put
  partitions from gendisk respectively.

* Iterators are implemented to help iterate through all partitions
  safely.

* Functions which require RCU readlock are marked with _rcu suffix.

* Use disk_put_part() in __blkdev_put() instead of directly putting
  the contained kobject.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:06 +02:00
Tejun Heo f331c0296f block: don't depend on consecutive minor space
* Implement disk_devt() and part_devt() and use them to directly
  access devt instead of computing it from ->major and ->first_minor.

  Note that all references to ->major and ->first_minor outside of
  block layer is used to determine devt of the disk (the part0) and as
  ->major and ->first_minor will continue to represent devt for the
  disk, converting these users aren't strictly necessary.  However,
  convert them for consistency.

* Implement disk_max_parts() to avoid directly deferencing
  genhd->minors.

* Update bdget_disk() such that it doesn't assume consecutive minor
  space.

* Move devt computation from register_disk() to add_disk() and make it
  the only one (all other usages use the initially determined value).

These changes clean up the code and will help disk->part dereference
fix and extended block device numbers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:05 +02:00
Tejun Heo cf771cb5a7 block: make variable and argument names more consistent
In hd_struct, @partno is used to denote partition number and a number
of other places use @part to denote hd_struct.  Functions use @part
and @index instead.  This causes confusion and makes it difficult to
use consistent variable names for hd_struct.  Always use @partno if a
variable represents partition number.

Also, print out functions use @f or @part for seq_file argument.  Use
@seqf uniformly instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:05 +02:00
Tejun Heo 310a2c1012 block: misc updates
This patch makes the following misc updates in preparation for
disk->part dereference fix and extended block devt support.

* implment part_to_disk()

* fix comment about gendisk->part indexing

* rename get_part() to disk_map_sector()

* don't use n which is always zero while printing disk information in
  diskstats_show()

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Tejun Heo 88e341261c block: update add_partition() error handling
d805dda4 tried to fix error case handling in add_partition() but had a
few problems.

* disk->part[] entry is set early and left dangling if operation
  fails.

* Once device initialized, the last put_device() is responsible for
  freeing all the resources.  The failure path freed part_stats and p
  regardless of put_device() causing double free.

* holders subdir holds reference to the disk device, so failure path
  should remove it to release resources properly which was missing.

This patch fixes the above problems and while at it move partition
slot busy check into add_partition() for completeness and inlines
holders subdirectory creation.  Using separate function for it just
obfuscates the code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Abdel Benamrouche <draconux@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Tejun Heo ec2cdedf79 block: allow deleting zero length partition
delete_partition() was noop for zero length partition.  As the
addition code allows creating zero lenght partition and deletion is
assumed to always succeed, this causes memory leak for zero length
partitions.  Allow zero length partitions to end their meaningless
lives.

While at it, allow deleting zero lenght partition via
BLKPG_DEL_PARTITION ioctl too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Tejun Heo def4e38ddd block: use class_dev_iterator instead of class_for_each_device()
Recent block_class iteration updates 5c6f35c5..27f3025 converted all
class device iteration to class_for_each_device() and
class_find_device(), which are correct but pain in the ass to use.
This pach converts them to newly introduced class_dev_iterator so that
they can use more natural control structures instead of separate
callbacks and struct to pass parameters to them.

This results in smaller and easier code.

This patch also restores the original behavior of not printing header
in /proc/partitions if there's no partition to print.  This is trivial
but still user-visible behavior.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Tejun Heo 2ac3cee529 block: don't grab block_class_lock unnecessarily
block_class_lock protects major_names array and bdev_map and doesn't
have anything to do with block class devices.  Don't grab them while
iterating over block class devices.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Tejun Heo ac65ece4ee block: fix partition info printouts
Recent block_class iteration updates 5c6f35c5..27f3025 broke partition
info printouts.

* printk_all_partitions(): Partition print out stops when it meets a
  partition hole.  Partition printing inner loop should continue
  instead of exiting on empty partition slot.

* /proc/partitions and /proc/diskstats: If all information can't be
  read in single read(), the information is truncated.  This is
  because find_start() doesn't actually update the counter containing
  the initial seek.  It runs to the end and ends up always reporting
  EOF on the second read.

This patch fixes both problems.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:04 +02:00
Randy Dunlap 710027a48e Add some block/ source files to the kernel-api docbook. Fix kernel-doc notation in them as needed. Fix changed function parameter names. Fix typos/spellos. In comments, change REQ_SPECIAL to REQ_TYPE_SPECIAL and REQ_BLOCK_PC to REQ_TYPE_BLOCK_PC.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
Mikulas Patocka 5df97b91b5 drop vmerge accounting
Remove hw_segments field from struct bio and struct request. Without virtual
merge accounting they have no purpose.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
Mikulas Patocka b8b3e16cfe block: drop virtual merging accounting
Remove virtual merge accounting.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
Aaron Carroll 4fb72f7646 deadline-iosched: non-functional fixes
* convert goto to simpler while loop;
 * use rq_end_sector() instead of computing manually;
 * fix false comments;
 * remove spurious whitespace;
 * convert rq_rb_root macro to an inline function.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:03 +02:00
Aaron Carroll 63de428b13 deadline-iosched: allow non-sequential batching
Deadline currently only batches sector-contiguous requests, so except
for a few circumstances (e.g. requests in a single direction), it is
essentially first come first served.  This is bad for throughput, so
change it to CSCAN, which means requests in a batch do not need to be
sequential and are issued in increasing sector order.

Signed-off-by: Aaron Carroll <aaronc@gelato.unsw.edu.au>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:02 +02:00
David Woodhouse e17fc0a1cc Allow elevators to sort/merge discard requests
But blkdev_issue_discard() still emits requests which are interpreted as
soft barriers, because naïve callers might otherwise issue subsequent
writes to those same sectors, which might cross on the queue (if they're
reallocated quickly enough).

Callers still _can_ issue non-barrier discard requests, but they have to
take care of queue ordering for themselves.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:02 +02:00
David Woodhouse d30a2605be Add BLKDISCARD ioctl to allow userspace to discard sectors
We may well want mkfs tools to use this to mark the whole device as
unwanted before they format it, for example.

The ioctl takes a pair of uint64_ts, which are start offset and length
in _bytes_. Although at the moment it might make sense for them both to
be in 512-byte sectors, I don't want to limit the ABI to that.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:02 +02:00
OGAWA Hirofumi 2ebca85abc Use WRITE_BARRIER in blkdev_issue_flush(), not (1<<BIO_RW_BARRIER)
Barriers should be submitted with the WRITE flag set.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:02 +02:00
David Woodhouse 35ba8f7083 blktrace: simplify flags handling in __blk_add_trace
Let the compiler see what's going on, and it can all get a lot simpler.
On PPC64 this reduces the size of the code calculating these bits by
about 60%. On x86_64 it's less of a win -- only 40%.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
David Woodhouse 27b29e86bf blktrace: support discard requests
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
David Woodhouse fb2dce862d Add 'discard' request handling
Some block devices benefit from a hint that they can forget the contents
of certain sectors. Add basic support for this to the block core, along
with a 'blkdev_issue_discard()' helper function which issues such
requests.

The caller doesn't get to provide an end_io functio, since
blkdev_issue_discard() will automatically split the request up into
multiple bios if appropriate. Neither does the function wait for
completion -- it's expected that callers won't care about when, or even
_if_, the request completes. It's only a hint to the device anyway. By
definition, the file system doesn't _care_ about these sectors any more.

[With feedback from OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> and
Jens Axboe <jens.axboe@oracle.com]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
David Woodhouse d628eaef31 Fix up comments about matching flags between bio and rq
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:01 +02:00
Jens Axboe 051cc3952a block: use bio_has_data() in the IO completion path
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:00 +02:00
Jens Axboe a9c701e594 block: use bio_has_data() to check for data carrying bio
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:00 +02:00
xiphmont@xiph.org 35e396cd10 SG_IO block filter whitelist missing MMC SET READ AHEAD command
I have another request for the block filter SG_IO command whitelist,
specifically the MMC streaming command set SET READ AHEAD command.
The command applies only to MMC CDROM/DVDROM drives with the streaming
optional feature set.  The command is useful to cdparanoia in that it
allows explicit cache control side effects that are, on many drives,
cdparanoia's most efficient way to flush/disable the media cache on
cdrom drives. I am aware of no reason why it should not be accessible
from usespace.

Also note that the command is already fully accessible through the
SCSI-native version of the SG_IO ioctl as well as the traditional SG
interface.  The command is only being refused on block devices.  That
means that on a typical stock distro, the command is available through
/dev/sg* but not /dev/scd* although both are typically available and
accessible.  Filtering the command is not providing any protection,
only a confusing inconsistency.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-10-09 08:56:00 +02:00