Граф коммитов

20 Коммитов

Автор SHA1 Сообщение Дата
Herbert Xu e9d3e08497 ipv6: Replace inet6_ifaddr->dead with state
This patch replaces the boolean dead flag on inet6_ifaddr with
a state enum.  This allows us to roll back changes when deleting
an address according to whether DAD has completed or not.

This patch only adds the state field and does not change the logic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18 15:36:06 -07:00
stephen hemminger 502a2ffd73 ipv6: convert idev_list to list macros
Convert to list macro's for the list of addresses per interface
in IPv6.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 15:45:09 -07:00
stephen hemminger 5c578aedcb IPv6: convert addrconf hash list to RCU
Convert from reader/writer lock to RCU and spinlock for addrconf
hash list.

Adds an additional helper macro for hlist_for_each_entry_continue_rcu
to handle the continue case.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 15:44:35 -07:00
stephen hemminger c2e21293c0 ipv6: convert addrconf list to hlist
Using hash list macros, simplifies code and helps later RCU.

This patch includes some initialization that is not strictly necessary,
since an empty hlist node/list is all zero; and list is in BSS
and node is allocated with kzalloc.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 15:44:34 -07:00
stephen hemminger 372e6c8f1f ipv6: convert temporary address list to list macros
Use list macros instead of open coded linked list.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20 15:44:34 -07:00
Stephen Hemminger 6457d26bd4 IPv6: convert mc_lock to spinlock
Only used for writing, so convert to spinlock

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17 18:48:44 -08:00
Eric Dumazet fd2c3ef761 net: cleanup include/net
This cleanup patch puts struct/union/enum opening braces,
in first line to ease grep games.

struct something
{

becomes :

struct something {

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04 05:06:25 -08:00
Richard Kennedy 04ec5cfcfd ipv6: reorder struct inet6_ifaddr to remove padding on 64 bit builds
reorder struct inet6_ifaddr to remove padding on 64 bit builds
    
remove 8 bytes of padding so inet6_ifaddr becomes 192 bytes & fits into
a smaller slab.
    
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21 13:29:05 -07:00
Adrian Bunk 888c848ed3 ipv6: make struct ipv6_devconf static
struct ipv6_devconf can now become static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-22 14:21:58 -07:00
Rami Rosen 0399e5f07a ipv6 addrconf: Remove IFA_GLOBAL definition from include/net/if_inet6.h.
This patches removes IFA_GLOBAL definition from linux/include/net/if_inet6.h
as it is unused.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-12 02:38:13 +09:00
Arnaldo Carvalho de Melo 246f19d194 [IPV6]: Reorg struct ifmcaddr6 to save some bytes
/home/acme/git/net-2.6/net/ipv6/mcast.c:
  struct ifmcaddr6 |   -8
 1 struct changed
  igmp6_group_dropped  |   -6
  add_grec             |   -3
  mld_ifc_timer_expire |  -18
  ip6_mc_add_src       |   -3
  ip6_mc_del_src       |   -3
  igmp6_group_added    |   -3
 6 functions changed, 36 bytes removed, diff: -36

ipv6.ko:
 6 functions changed, 36 bytes removed, diff: -36

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:54 -08:00
Arnaldo Carvalho de Melo 4e7e5cfe38 [INET6]: Reorganize struct inet6_dev to save 8 bytes
And make it a multiple of a 64 bytes, reducing cacheline trashing:

Before:

[acme@doppio net-2.6]$ pahole -C inet6_dev net/dccp/ipv6.o
struct inet6_dev {
	<SNIP>
	long unsigned int          mc_maxdelay;          /*    48     8 */
	unsigned char              mc_qrv;               /*    56     1 */
	unsigned char              mc_gq_running;        /*    57     1 */
	unsigned char              mc_ifc_count;         /*    58     1 */

	/* XXX 5 bytes hole, try to pack */

	/* --- cacheline 1 boundary (64 bytes) --- */
	struct timer_list          mc_gq_timer;          /*    64    48 */
	<SNIP>
	__u32                      if_flags;             /*   180     4 */
	int                        dead;                 /*   184     4 */
	u8                         rndid[8];             /*   188     8 */

	/* XXX 4 bytes hole, try to pack */

	/* --- cacheline 3 boundary (192 bytes) was 8 bytes ago --- */
	struct timer_list          regen_timer;          /*   200    48 */

	<SNIP>

	/* size: 456, cachelines: 8 */
	/* sum members: 447, holes: 2, sum holes: 9 */
	/* last cacheline: 8 bytes */
};

After:

net-2.6/net/ipv6/af_inet6.c:
  struct inet6_dev |   -8
 1 struct changed

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03 04:28:52 -08:00
Rolf Manderscheid a9e527e3f9 IPoIB: improve IPv4/IPv6 to IB mcast mapping functions
An IPoIB subnet on an IB fabric that spans multiple IB subnets can't
use link-local scope in multicast GIDs.  The existing routines that
map IP/IPv6 multicast addresses into IB link-level addresses hard-code
the scope to link-local, and they also leave the partition key field
uninitialised.  This patch adds a parameter (the link-level broadcast
address) to the mapping routines, allowing them to initialise both the
scope and the P_Key appropriately, and fixes up the call sites.

The next step will be to add a way to configure the scope for an IPoIB
interface.

Signed-off-by: Rolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-01-25 14:15:37 -08:00
David L Stevens 14878f75ab [IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]
Background: RFC 4293 deprecates existing individual, named ICMP
type counters to be replaced with the ICMPMsgStatsTable. This table
includes entries for both IPv4 and IPv6, and requires counting of all
ICMP types, whether or not the machine implements the type.

These patches "remove" (but not really) the existing counters, and
replace them with the ICMPMsgStats tables for v4 and v6.
It includes the named counters in the /proc places they were, but gets the
values for them from the new tables. It also counts packets generated
from raw socket output (e.g., OutEchoes, MLD queries, RA's from
radvd, etc).

Changes:
1) create icmpmsg_statistics mib
2) create icmpv6msg_statistics mib
3) modify existing counters to use these
4) modify /proc/net/snmp to add "IcmpMsg" with all ICMP types
        listed by number for easy SNMP parsing
5) modify /proc/net/snmp printing for "Icmp" to get the named data
        from new counters.
[new to 2nd revision]
6) support per-interface ICMP stats
7) use common macro for per-device stat macros

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:27 -07:00
YOSHIFUJI Hideaki a11d206d0f [IPV6]: Per-interface statistics support.
For IP MIB (RFC4293).

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2006-12-02 21:22:08 -08:00
YOSHIFUJI Hideaki 8814c4b533 [IPV6] ADDRCONF: Convert addrconf_lock to RCU.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 15:20:26 -07:00
YOSHIFUJI Hideaki 955189efb4 [IPV6]: ADDRCONF: Use our standard algorithm for randomized ifid.
RFC 3041 describes an algorithm to generate random interface
identifier.  In RFC 3041bis, it is allowed to use different
algorithm than one described in RFC 3041.

So, let's use our standard pseudo random algorithm to simplify
our implementation.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 16:54:09 -08:00
David L Stevens 5ab4a6c81e [IPV6] mcast: Fix multiple issues in MLDv2 reports.
The below "jumbo" patch fixes the following problems in MLDv2.

1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks
        all nonzero source queries on little-endian (!)]

2) Add locking to source filter list [resend of prior patch]

3) fix "mld_marksources()" to
        a) send nothing when all queried sources are excluded
        b) send full exclude report when source queried sources are
                not excluded
        c) don't schedule a timer when there's nothing to report

NOTE: RFC 3810 specifies the source list should be saved and each
  source reported individually as an IS_IN. This is an obvious DOS
  path, requiring the host to store and then multicast as many sources
  as are queried (e.g., millions...). This alternative sends a full, 
  relevant report that's limited to number of sources present on the
  machine.

4) fix "add_grec()" to send empty-source records when it should
        The original check doesn't account for a non-empty source
        list with all sources inactive; the new code keeps that
        short-circuit case, and also generates the group header
        with an empty list if needed.

5) fix mca_crcount decrement to be after add_grec(), which needs
        its original value

These issues (other than item #1 ;-) ) were all found by Yan Zheng,
much thanks!

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27 14:03:00 -08:00
YOSHIFUJI Hideaki 3c21edbd11 [IPV6]: Defer IPv6 device initialization until the link becomes ready.
NETDEV_UP might be sent even if the link attached to the interface was
not ready.  DAD does not make sense in such case, so we won't do so.
After interface

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-12-21 22:57:24 +09:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00