This patch is to fix typos in f2fs files.
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
.i_compress_level was introduced by commit 3fde13f817 ("f2fs: compress:
support compress level"), but never be used.
This patch updates as below:
- load high 8-bits of on-disk .i_compress_flag to in-memory .i_compress_level
- load low 8-bits of on-disk .i_compress_flag to in-memory .i_compress_flag
- change type of in-memory .i_compress_flag from unsigned short to unsigned
char.
w/ above changes, we can avoid unneeded bit shift whenever during
.init_compress_ctx(), and shrink size of struct f2fs_inode_info.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to use bitfield in struct f2fs_io_info to improve
memory usage.
struct f2fs_io_info {
...
unsigned int need_lock:8; /* indicate we need to lock cp_rwsem */
unsigned int version:8; /* version of the node */
unsigned int submitted:1; /* indicate IO submission */
unsigned int in_list:1; /* indicate fio is in io_list */
unsigned int is_por:1; /* indicate IO is from recovery or not */
unsigned int retry:1; /* need to reallocate block address */
unsigned int encrypted:1; /* indicate file is encrypted */
unsigned int post_read:1; /* require post read */
...
};
After this patch, size of struct f2fs_io_info reduces from 136 to 120.
[Nathan: fix a compile warning (single-bit-bitfield-constant-conversion)]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_init_compress_mempool() only initializes the memory pool during
the f2fs module init phase. Let's mark it as __init like any other
function.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can start freeing cluster page(s) from which compression
is not used. It will get better performance.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split __submit_bio into one function each for reads and writes, and a
helper for aligning writes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add missed .migrate_folio for compressed inode, in order to support
migration of compressed inode's page.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this round, we've added two features: 1) F2FS_IOC_START_ATOMIC_REPLACE and
2) per-block age-based extent cache. 1) is a variant of the previous atomic
write feature which guarantees a per-file atomicity. It would be more efficient
than AtomicFile implementation in Android framework. 2) implements another type
of extent cache in memory which keeps the per-block age in a file, so that block
allocator could split the hot and cold data blocks more accurately.
Enhancement:
- introduce F2FS_IOC_START_ATOMIC_REPLACE
- refactor extent_cache to add a new per-block-age-based extent cache support
- introduce discard_urgent_util, gc_mode, max_ordered_discard sysfs knobs
- add proc entry to show discard_plist info
- optimize iteration over sparse directories
- add barrier mount option
Bug fix
- avoid victim selection from previous victim section
- fix to enable compress for newly created file if extension matches
- set zstd compress level correctly
- initialize locks early in f2fs_fill_super() to fix bugs reported by syzbot
- correct i_size change for atomic writes
- allow to read node block after shutdown
- allow to set compression for inlined file
- fix gc mode when gc_urgent_high_remaining is 1
- should put a page when checking the summary info
Minor fixes and various clean-ups in GC, discard, debugfs, sysfs, and doc.
-----BEGIN PGP SIGNATURE-----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=f00t
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added two features: F2FS_IOC_START_ATOMIC_REPLACE
and a per-block age-based extent cache.
F2FS_IOC_START_ATOMIC_REPLACE is a variant of the previous atomic
write feature which guarantees a per-file atomicity. It would be more
efficient than AtomicFile implementation in Android framework.
The per-block age-based extent cache implements another type of extent
cache in memory which keeps the per-block age in a file, so that block
allocator could split the hot and cold data blocks more accurately.
Enhancements:
- introduce F2FS_IOC_START_ATOMIC_REPLACE
- refactor extent_cache to add a new per-block-age-based extent cache support
- introduce discard_urgent_util, gc_mode, max_ordered_discard sysfs knobs
- add proc entry to show discard_plist info
- optimize iteration over sparse directories
- add barrier mount option
Bug fixes:
- avoid victim selection from previous victim section
- fix to enable compress for newly created file if extension matches
- set zstd compress level correctly
- initialize locks early in f2fs_fill_super() to fix bugs reported by syzbot
- correct i_size change for atomic writes
- allow to read node block after shutdown
- allow to set compression for inlined file
- fix gc mode when gc_urgent_high_remaining is 1
- should put a page when checking the summary info
Minor fixes and various clean-ups in GC, discard, debugfs, sysfs, and
doc"
* tag 'f2fs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (63 commits)
f2fs: reset wait_ms to default if any of the victims have been selected
f2fs: fix some format WARNING in debug.c and sysfs.c
f2fs: don't call f2fs_issue_discard_timeout() when discard_cmd_cnt is 0 in f2fs_put_super()
f2fs: fix iostat parameter for discard
f2fs: Fix spelling mistake in label: free_bio_enrty_cache -> free_bio_entry_cache
f2fs: add block_age-based extent cache
f2fs: allocate the extent_cache by default
f2fs: refactor extent_cache to support for read and more
f2fs: remove unnecessary __init_extent_tree
f2fs: move internal functions into extent_cache.c
f2fs: specify extent cache for read explicitly
f2fs: introduce f2fs_is_readonly() for readability
f2fs: remove F2FS_SET_FEATURE() and F2FS_CLEAR_FEATURE() macro
f2fs: do some cleanup for f2fs module init
MAINTAINERS: Add f2fs bug tracker link
f2fs: remove the unused flush argument to change_curseg
f2fs: open code allocate_segment_by_default
f2fs: remove struct segment_allocation default_salloc_ops
f2fs: introduce discard_urgent_util sysfs node
f2fs: define MIN_DISCARD_GRANULARITY macro
...
As a step towards freeing the PG_error flag for other uses, change ext4
and f2fs to stop using PG_error to track verity errors. Instead, if a
verity error occurs, just mark the whole bio as failed. The coarser
granularity isn't really a problem since it isn't any worse than what
the block layer provides, and errors from a multi-page readahead aren't
reported to applications unless a single-page read fails too.
f2fs supports compression, which makes the f2fs changes a bit more
complicated than desired, but the basic premise still works.
Note: there are still a few uses of PageError in f2fs, but they are on
the write path, so they are unrelated and this patch doesn't touch them.
Reviewed-by: Chao Yu <chao@kernel.org>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221129070401.156114-1-ebiggers@kernel.org
This patch supports to record detail reason of FSCORRUPTED error into
f2fs_super_block.s_errors[].
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It have checked "compressed" at the entry of
f2fs_sanity_check_cluster, just remove the
redundant check for better performance here.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just use the defined COMPRESS_MAPPING to get compress cache
mapping instaed of direct accessing name.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It could return directly after init_decompress_ctx.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In this cycle, we mainly fixed some corner cases that manipulate a per-file
compression flag inappropriately. And, we found f2fs counted valid blocks in a
section incorrectly when zone capacity is set, and thus, fixed it with
additional sysfs entry to check it easily. Lastly, this series includes
several patches with respect to the new atomic write support such as a
couple of bug fixes and re-adding atomic_write_abort support that we removed
by mistake in the previous release.
Enhancement:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fix:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity checks.
-----BEGIN PGP SIGNATURE-----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=dJ41
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we mainly fixed some corner cases that manipulate a
per-file compression flag inappropriately. And, we found f2fs counted
valid blocks in a section incorrectly when zone capacity is set, and
thus, fixed it with additional sysfs entry to check it easily.
Lastly, this series includes several patches with respect to the new
atomic write support such as a couple of bug fixes and re-adding
atomic_write_abort support that we removed by mistake in the previous
release.
Enhancements:
- add sysfs entries to understand atomic write operations and zone
capacity
- introduce memory mode to get a hint for low-memory devices
- adjust the waiting time of foreground GC
- decompress clusters under softirq to avoid non-deterministic
latency
- do not skip updating inode when retrying to flush node page
- enforce single zone capacity
Bug fixes:
- set the compression/no-compression flags correctly
- revive F2FS_IOC_ABORT_VOLATILE_WRITE
- check inline_data during compressed inode conversion
- understand zone capacity when calculating valid block count
As usual, the series includes several minor clean-ups and sanity
checks"
* tag 'f2fs-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (29 commits)
f2fs: use onstack pages instead of pvec
f2fs: intorduce f2fs_all_cluster_page_ready
f2fs: clean up f2fs_abort_atomic_write()
f2fs: handle decompress only post processing in softirq
f2fs: do not allow to decompress files have FI_COMPRESS_RELEASED
f2fs: do not set compression bit if kernel doesn't support
f2fs: remove device type check for direct IO
f2fs: fix null-ptr-deref in f2fs_get_dnode_of_data
f2fs: revive F2FS_IOC_ABORT_VOLATILE_WRITE
f2fs: fix to do sanity check on segment type in build_sit_entries()
f2fs: obsolete unused MAX_DISCARD_BLOCKS
f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
f2fs: fix to remove F2FS_COMPR_FL and tag F2FS_NOCOMP_FL at the same time
f2fs: introduce sysfs atomic write statistics
f2fs: don't bother wait_ms by foreground gc
f2fs: invalidate meta pages only for post_read required inode
f2fs: allow compression of files without blocks
f2fs: fix to check inline_data during compressed inode conversion
f2fs: Delete f2fs_copy_page() and replace with memcpy_page()
f2fs: fix to invalidate META_MAPPING before DIO write
...
Since pvec have 15 pages, it not a multiple of 4, when write compressed
pages, write in 64K as a unit, it will call pagevec_lookup_range_tag
agagin, sometimes this will take a lot of time.
Use onstack pages instead of pvec to mitigate this problem.
Signed-off-by: Fengnan Chang <fengnanchang@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When write total cluster, all pages is uptodate, there is not need to call
f2fs_prepare_compress_overwrite, intorduce f2fs_all_cluster_page_ready
to avoid this.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now decompression is being handled in workqueue and it makes read I/O
latency non-deterministic, because of the non-deterministic scheduling
nature of workqueues. So, I made it handled in softirq context only if
possible, not in low memory devices, since this modification will
maintain decompresion related memory a little longer.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Convert this function to use folios throughout.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: Chao Yu <chao@kernel.org>
Otherwise, in image which doesn't support compression feature,
page_array_entry will be initialized w/o use.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While converting f2fs_release_page() to f2fs_release_folio(), cache the
sb_info so we don't need to retrieve it twice, and remove the redundant
call to set_page_private(). The use of folios should be pushed further
into f2fs from here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Primarily this series converts some of the address_space operations
to take a folio instead of a page.
->is_partially_uptodate() takes a folio instead of a page and changes the
type of the 'from' and 'count' arguments to make it obvious they're bytes.
->invalidatepage() becomes ->invalidate_folio() and has a similar type change.
->launder_page() becomes ->launder_folio()
->set_page_dirty() becomes ->dirty_folio() and adds the address_space as
an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmI4hqMACgkQDpNsjXcp
gj7r7Af/fVJ7m8kKqjP/IayX3HiJRuIDQw+vM++BlRNXdjz+IyED6whdmFGxJeOY
BMyT+8ApOAz7ErS4G+7fAv4ScJK/aEgFUsnSeAiCp0PliiEJ5NNJzElp6sVmQ7H5
SX7+Ek444FZUGsQuy0qL7/ELpR3ditnD7x+5U2g0p5TeaHGUQn84crRyfR4xuhNG
EBD9D71BOb7OxUcOHe93pTkK51QsQ0aCrcIsB1tkK5KR0BAthn1HqF7ehL90Rvrr
omx5M7aDWGY4oj7IKrhlAs+55Ah2WaOzrZBp0FXNbr4UENDBKWKyUxErwa4xPkf6
Gm1iQG/CspOHnxN3YWsd5WjtlL3A+A==
=cOiq
-----END PGP SIGNATURE-----
Merge tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache
Pull filesystem folio updates from Matthew Wilcox:
"Primarily this series converts some of the address_space operations to
take a folio instead of a page.
Notably:
- a_ops->is_partially_uptodate() takes a folio instead of a page and
changes the type of the 'from' and 'count' arguments to make it
obvious they're bytes.
- a_ops->invalidatepage() becomes ->invalidate_folio() and has a
similar type change.
- a_ops->launder_page() becomes ->launder_folio()
- a_ops->set_page_dirty() becomes ->dirty_folio() and adds the
address_space as an argument.
There are a couple of other misc changes up front that weren't worth
separating into their own pull request"
* tag 'folio-5.18b' of git://git.infradead.org/users/willy/pagecache: (53 commits)
fs: Remove aops ->set_page_dirty
fb_defio: Use noop_dirty_folio()
fs: Convert __set_page_dirty_no_writeback to noop_dirty_folio
fs: Convert __set_page_dirty_buffers to block_dirty_folio
nilfs: Convert nilfs_set_page_dirty() to nilfs_dirty_folio()
mm: Convert swap_set_page_dirty() to swap_dirty_folio()
ubifs: Convert ubifs_set_page_dirty to ubifs_dirty_folio
f2fs: Convert f2fs_set_node_page_dirty to f2fs_dirty_node_folio
f2fs: Convert f2fs_set_data_page_dirty to f2fs_dirty_data_folio
f2fs: Convert f2fs_set_meta_page_dirty to f2fs_dirty_meta_folio
afs: Convert afs_dir_set_page_dirty() to afs_dir_dirty_folio()
btrfs: Convert extent_range_redirty_for_io() to use folios
fs: Convert trivial uses of __set_page_dirty_nobuffers to filemap_dirty_folio
btrfs: Convert from set_page_dirty to dirty_folio
fscache: Convert fscache_set_page_dirty() to fscache_dirty_folio()
fs: Add aops->dirty_folio
fs: Remove aops->launder_page
orangefs: Convert launder_page to launder_folio
nfs: Convert from launder_page to launder_folio
fuse: Convert from launder_page to launder_folio
...
As congestion is no longer tracked, congestion_wait() is effectively
equivalent to io_schedule_timeout().
So introduce f2fs_io_schedule_timeout() which sets TASK_UNINTERRUPTIBLE
and call that instead.
Link: https://lkml.kernel.org/r/164549983744.9187.6425865370954230902.stgit@noble.brown
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <Anna.Schumaker@Netapp.com>
Cc: Chao Yu <chao@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Paolo Valente <paolo.valente@linaro.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In lz4_decompress_pages(), if size of decompressed data is not equal to
expected one, we should print the size rather than size of target buffer
for decompressed data, fix it.
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is a minimal change which just accepts the new arguments and passes
the single struct page to the functions which do the work. There is
very little progress here toards making f2fs support large folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Mike Marshall <hubcap@omnibond.com> # orangefs
Tested-by: David Howells <dhowells@redhat.com> # afs
f2fs rw_semaphores work better if writers can starve readers,
especially for the checkpoint thread, because writers are strictly
more important than reader threads. This prevents significant priority
inversion between low-priority readers that blocked while trying to
acquire the read lock and a second acquisition of the write lock that
might be blocking high priority work.
Signed-off-by: Tim Murray <timmurray@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to mitigate lock contention between f2fs_write_checkpoint and
f2fs_get_node_info along with nat_tree_lock.
The idea is, if checkpoint is currently running, other threads that try to grab
nat_tree_lock would be better to wait for checkpoint.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is a potential deadlock between writeback process and a process
performing write_begin() or write_cache_pages() while trying to write
same compress file, but not compressable, as below:
[Process A] - doing checkpoint
[Process B] [Process C]
f2fs_write_cache_pages()
- lock_page() [all pages in cluster, 0-31]
- f2fs_write_multi_pages()
- f2fs_write_raw_pages()
- f2fs_write_single_data_page()
- f2fs_do_write_data_page()
- return -EAGAIN [f2fs_trylock_op() failed]
- unlock_page(page) [e.g., page 0]
- generic_perform_write()
- f2fs_write_begin()
- f2fs_prepare_compress_overwrite()
- prepare_compress_overwrite()
- lock_page() [e.g., page 0]
- lock_page() [e.g., page 1]
- lock_page(page) [e.g., page 0]
Since there is no compress process, it is no longer necessary to hold
locks on every pages in cluster within f2fs_write_raw_pages().
This patch changes f2fs_write_raw_pages() to release all locks first
and then perform write same as the non-compress file in
f2fs_write_cache_pages().
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't alloc new page pointers array to replace old, just use old, introduce
valid_nr_cpages to indicate valid number of page pointers in array, try to
reduce one page array alloc and free when write compress page.
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This PR includes 5 commits that update the zstd library version:
1. Adds a new kernel-style wrapper around zstd. This wrapper API
is functionally equivalent to the subset of the current zstd API that is
currently used. The wrapper API changes to be kernel style so that the symbols
don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same
API and preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are zero
functional changes.
2. Adds an indirection for `lib/decompress_unzstd.c` so it
doesn't depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
3. Imports the zstd-1.4.10 source code. This commit is automatically generated
from upstream zstd (https://github.com/facebook/zstd).
4. Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
5. Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've included a
FAQ-style summary of the history of the patchset, and why we are taking this
approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is was released
August 20, 2017. Since then zstd has seen many bug fixes and performance
improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz,
and bug fixes aren't backported to older versions. So the only way to sanely get
these fixes is to keep up to date with upstream zstd. There are no known security
issues that affect the kernel, but we need to be able to update in case there
are. And while there are no known security issues, there are relevant bug fixes.
For example the problem with large kernel decompression has been fixed upstream
for over 2 years https://lkml.org/lkml/2020/9/29/27.
Additionally the performance improvements for kernel use cases are significant.
Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming down the
line in the next zstd release, and the new automated update patch generation
will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version. Then the
3rd patch in the series imports upstream zstd into the kernel. This patch is
automatically generated from upstream. A script makes the necessary changes and
imports it into the kernel. The changes are:
- Replace all libc dependencies with kernel replacements and rewrite includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous integration.
When we cut a new zstd release, we will submit a patch to the kernel to update
the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd up to
date. The current zstd in the kernel shares the guts of the code, but has a lot
of API and minor changes to work in the kernel. This is because at the time
upstream zstd was not ready to be used in the kernel envrionment as-is. But,
since then upstream zstd has evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is restructuring
the code, so it both deletes the existing zstd, and re-adds the new structure.
Future updates will be directly proportional to the changes in upstream zstd
since the last import. They will admittidly be large, as zstd is an actively
developed project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is not feasible
for several reasons:
- There are over 3500 upstream commits since the zstd version in the kernel.
- The automation to automatically generate the kernel update was only added recently,
so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have bugs that were
fixed before a release.
Another option to reduce the patch size would be to first reorganize to the new
file structure, and then apply the patch. However, the current kernel zstd is formatted
with clang-format to be more "kernel-like". But, the new method imports zstd as-is,
without additional formatting, to allow for closer correlation with upstream, and
easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit going
forward. Upstream zstd doesn't support production use cases running of the
development branch. We have a lot of post-commit fuzzing that catches many bugs,
so indiviudal commits may be buggy, but fixed before a release. So going forward,
I intend to import every (important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree
for zstd patches. Because of that, there were several patches that either got ignored,
or took a long time to merge, since it wasn't clear which tree should pick them up.
I'm officially stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the kernel zstd get
ported upstream, so they aren't erased when the next version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel,
InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both
performance and correctness.
Also, thanks to many people in the community who have tested these patches locally.
If you have tested the patches, please reply with a Tested-By so I can collect them
for the PR I will send to Linus.
Lastly, this code will bake in linux-next before being merged into v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest
release when it was created. Since the update patch is automatically generated
from upstream, I could generate it from zstd-1.5.0. However, there were some
large stack usage regressions in zstd-1.5.0, and are only fixed in the latest
development branch. And the latest development branch contains some new code that
needs to bake in the fuzzer before I would feel comfortable releasing to the
kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we can update
the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release is an
artifical release based off of zstd-1.4.9, with some fixes for the kernel
backported from the development branch. I will tag the zstd-1.4.10 release after
this patchset is merged, so the Linux Kernel is running a known version of zstd
that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the upstream zstd
API. It first added a shim API that supported the new upstream API with the old
code, then updated callers to use the new shim API, then transitioned to the
new code and deleted the shim API. However, Cristoph Hellwig suggested that we
transition to a kernel style API, and hide zstd's upstream API behind that.
This is because zstd's upstream API is supports many other use cases, and does
not follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set.
The largest changes in the design of the patchset are driven by the discussions
in V11, V5, and V1. Sorry for the mix of links, I couldn't find most of the the
threads on lkml.org.
V12: https://www.spinics.net/lists/linux-crypto/msg58189.html
V11: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
V10: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
V9: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
V8: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
V7: https://lkml.org/lkml/2020/12/3/1195
V6: https://lkml.org/lkml/2020/12/2/1245
V5: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
V4: https://www.spinics.net/lists/linux-btrfs/msg105783.html
V3: https://lkml.org/lkml/2020/9/23/1074
V2: https://www.spinics.net/lists/linux-btrfs/msg105505.html
V1: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
-----BEGIN PGP SIGNATURE-----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=Xb18
-----END PGP SIGNATURE-----
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27 [1]
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12]
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11]
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10]
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9]
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8]
Link: https://lkml.org/lkml/2020/12/3/1195 [v7]
Link: https://lkml.org/lkml/2020/12/2/1245 [v6]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5]
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4]
Link: https://lkml.org/lkml/2020/9/23/1074 [v3]
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1]
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
In this cycle, we've applied relatively small number of patches which fix subtle
corner cases mainly, while introducing a new mount option to be able to fragment
the disk intentionally for performance tests.
Enhancement:
- add a mount option to fragmente on-disk layout to understand the performance
- support direct IO for multi-partitions
- add a fault injection of dquot_initialize
Bug fix:
- address some lockdep complaints
- fix a deadlock issue with quota
- fix a memory tuning condition
- fix compression condition to improve the ratio
- fix disabling compression on the non-empty compressed file
- invalidate cached pages before IPU/DIO writes
And, we've added some minor clean-ups as usual.
-----BEGIN PGP SIGNATURE-----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=KGQ3
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we've applied relatively small number of patches which
fix subtle corner cases mainly, while introducing a new mount option
to be able to fragment the disk intentionally for performance tests.
Enhancements:
- add a mount option to fragmente on-disk layout to understand the
performance
- support direct IO for multi-partitions
- add a fault injection of dquot_initialize
Bug fixes:
- address some lockdep complaints
- fix a deadlock issue with quota
- fix a memory tuning condition
- fix compression condition to improve the ratio
- fix disabling compression on the non-empty compressed file
- invalidate cached pages before IPU/DIO writes
And, we've added some minor clean-ups as usual"
* tag 'f2fs-for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: fix UAF in f2fs_available_free_memory
f2fs: invalidate META_MAPPING before IPU/DIO write
f2fs: support fault injection for dquot_initialize()
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
f2fs: compress: disallow disabling compress on non-empty compressed file
f2fs: compress: fix overwrite may reduce compress ratio unproperly
f2fs: multidevice: support direct IO
f2fs: introduce fragment allocation mode mount option
f2fs: replace snprintf in show functions with sysfs_emit
f2fs: include non-compressed blocks in compr_written_block
f2fs: fix wrong condition to trigger background checkpoint correctly
f2fs: fix to use WHINT_MODE
f2fs: fix up f2fs_lookup tracepoints
f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
f2fs: introduce excess_dirty_threshold()
f2fs: avoid attaching SB_ACTIVE flag during mount
f2fs: quota: fix potential deadlock
f2fs: should use GFP_NOFS for directory inodes
This patch:
- Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h`
- Updates modified zstd headers to yearless copyright
- Adds a new API in `include/linux/zstd.h` that is functionally
equivalent to the in-use subset of the current API. Functions are
renamed to avoid symbol collisions with zstd, to make it clear it is
not the upstream zstd API, and to follow the kernel style guide.
- Updates all callers to use the new API.
There are no functional changes in this patch. Since there are no
functional change, I felt it was okay to update all the callers in a
single patch. Once the API is approved, the callers are mechanically
changed.
This patch is preparing for the 3rd patch in this series, which updates
zstd to version 1.4.10. Since the upstream zstd API is no longer exposed
to callers, the update can happen transparently.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
when overwrite only first block of cluster, since cluster is not full, it
will call f2fs_write_raw_pages when f2fs_write_multi_pages, and cause the
whole cluster become uncompressed eventhough data can be compressed.
this may will make random write bench score reduce a lot.
root# dd if=/dev/zero of=./fio-test bs=1M count=1
root# sync
root# echo 3 > /proc/sys/vm/drop_caches
root# f2fs_io get_cblocks ./fio-test
root# dd if=/dev/zero of=./fio-test bs=4K count=1 oflag=direct conv=notrunc
w/o patch:
root# f2fs_io get_cblocks ./fio-test
189
w/ patch:
root# f2fs_io get_cblocks ./fio-test
192
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Need to include non-compressed blocks in compr_written_block to
estimate average compression ratio more accurately.
Fixes: 5ac443e26a ("f2fs: add sysfs nodes to get runtime compression stat")
Cc: stable@vger.kernel.org
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There is no need to pull blk-cgroup.h and thus blkdev.h in here, so
break the include chain.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In f2fs_write_multi_pages(), f2fs_compress_pages() allocates pages for
compression work in cc->cpages[]. Then, f2fs_write_compressed_pages() initiates
bio submission. But, if there's any error before submitting the IOs like early
f2fs_cp_error(), previously it didn't free cpages by f2fs_compress_free_page().
Let's fix memory leak by putting that just before deallocating cc->cpages.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sanity_check_cluster() to support doing
sanity check on cluster of compressed file, it will be triggered
from below two paths:
- __f2fs_cluster_blocks()
- f2fs_map_blocks(F2FS_GET_BLOCK_FIEMAP)
And it can detect below three kind of cluster insanity status.
C: COMPRESS_ADDR
N: NULL_ADDR or NEW_ADDR
V: valid blkaddr
*: any value
1. [*|C|*|*]
2. [C|*|C|*]
3. [C|N|N|V]
Signed-off-by: Chao Yu <chao@kernel.org>
[Nathan Chancellor: fix missing inline warning]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports to inject fault into f2fs_kmem_cache_alloc().
Usage:
a) echo 32768 > /sys/fs/f2fs/<dev>/inject_type or
b) mount -o fault_type=32768 <dev> <mountpoint>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Compressed inode may suffer read performance issue due to it can not
use extent cache, so I propose to add this unaligned extent support
to improve it.
Currently, it only works in readonly format f2fs image.
Unaligned extent: in one compressed cluster, physical block number
will be less than logical block number, so we add an extra physical
block length in extent info in order to indicate such extent status.
The idea is if one whole cluster blocks are contiguous physically,
once its mapping info was readed at first time, we will cache an
unaligned (or aligned) extent info entry in extent cache, it expects
that the mapping info will be hitted when rereading cluster.
Merge policy:
- Aligned extents can be merged.
- Aligned extent and unaligned extent can not be merged.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Support to use address space of inner inode to cache compressed block,
in order to improve cache hit ratio of random read.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Once we release compressed blocks, we used to set IMMUTABLE bit. But it turned
out it disallows every fs operations which we don't need for compression.
Let's just prevent writing data only.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will reserve iblocks for compression saved, so during compressed
cluster overwrite, we don't need to preallocate blocks for later
write.
In addition, it adds a bug_on to detect wrong reserved iblock number
in __f2fs_cluster_blocks().
Bug fix in the original patch by Jaegeuk:
If we released compressed blocks having an immutable bit, we can see less
number of compressed block addresses. Let's fix wrong BUG_ON.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch allows to compress mmap files. E.g., for so files.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, in order to reuse __f2fs_cluster_blocks(),
f2fs_is_compressed_cluster() assigned a compress_ctx type variable,
which is used to pass few parameters (cc.inode, cc.cluster_size,
cc.cluster_idx), it's wasteful to allocate such large space in stack.
Let's clean up parameters of __f2fs_cluster_blocks() to avoid that.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Restruct f2fs page private layout for below reasons:
There are some cases that f2fs wants to set a flag in a page to
indicate a specified status of page:
a) page is in transaction list for atomic write
b) page contains dummy data for aligned write
c) page is migrating for GC
d) page contains inline data for inline inode flush
e) page belongs to merkle tree, and is verified for fsverity
f) page is dirty and has filesystem/inode reference count for writeback
g) page is temporary and has decompress io context reference for compression
There are existed places in page structure we can use to store
f2fs private status/data:
- page.flags: PG_checked, PG_private
- page.private
However it was a mess when we using them, which may cause potential
confliction:
page.private PG_private PG_checked page._refcount (+1 at most)
a) -1 set +1
b) -2 set
c), d), e) set
f) 0 set +1
g) pointer set
The other problem is page.flags has no free slot, if we can avoid set
zero to page.private and set PG_private flag, then we use non-zero value
to indicate PG_private status, so that we may have chance to reclaim
PG_private slot for other usage. [1]
The other concern is f2fs has bad scalability in aspect of indicating
more page status.
So in this patch, let's restructure f2fs' page.private as below to
solve above issues:
Layout A: lowest bit should be 1
| bit0 = 1 | bit1 | bit2 | ... | bit MAX | private data .... |
bit 0 PAGE_PRIVATE_NOT_POINTER
bit 1 PAGE_PRIVATE_ATOMIC_WRITE
bit 2 PAGE_PRIVATE_DUMMY_WRITE
bit 3 PAGE_PRIVATE_ONGOING_MIGRATION
bit 4 PAGE_PRIVATE_INLINE_INODE
bit 5 PAGE_PRIVATE_REF_RESOURCE
bit 6- f2fs private data
Layout B: lowest bit should be 0
page.private is a wrapped pointer.
After the change:
page.private PG_private PG_checked page._refcount (+1 at most)
a) 11 set +1
b) 101 set +1
c) 1001 set +1
d) 10001 set +1
e) set
f) 100001 set +1
g) pointer set +1
[1] https://lore.kernel.org/linux-f2fs-devel/20210422154705.GO3596236@casper.infradead.org/T/#u
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds cp_error check in f2fs_write_compressed_pages() like we did
in f2fs_write_single_data_page()
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch renames __cluster_may_compress() to cluster_has_invalid_data() for
better readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_destroy_compress_ctx(), after f2fs_destroy_compress_ctx(),
cc.cluster_idx will be cleared w/ NULL_CLUSTER, f2fs_cluster_blocks()
may check wrong cluster metadata, fix it.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jinyoung CHOI
Chao Yu
Yangtao Li
Zhang Qilong
Christoph Hellwig
Linus Torvalds
Eric Biggers
Sheng Yong
Fengnan Chang
Fengnan Chang
Daeho Jeong
Matthew Wilcox (Oracle)
NeilBrown
Tim Murray
Jaegeuk Kim
Hyeong-Jun Kim
Nick Terrell
Chao Yu