Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
Bill Pemberton e23e7a1436 ALSA: pci: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:20:55 +01:00
Takashi Iwai e9f66d9b9c ALSA: pci: clean up using module_pci_driver()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 12:25:00 +02:00
Rusty Russell a67ff6a540 ALSA: module_param: make bool parameters really bool
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19 10:34:41 +01:00
Paul Gortmaker 65a772172b sound: fix drivers needing module.h not moduleparam.h
The implicit presence of module.h lured several users into
incorrectly thinking that they only needed/used modparam.h
but once we clean up the module.h presence, these will show
up as build failures, so fix 'em now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:19 -04:00
Markus Bollinger 1470579913 ALSA: lola - Fix for Lola280 board
- add/fix comments and debug messages
- fix incomplete matrix init
- comment out creation of buggy lola_dest_gain_mixer controls
- minor optimisations

Signed-off-by: Markus Bollinger <bollinger@digigram.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-24 12:54:43 +02:00
Takashi Iwai 3409fcd1f7 Merge branch 'fix/hda' into topic/misc 2011-06-17 14:54:47 +02:00
Takashi Iwai e72888e91c ALSA: lola - Fix section mismatch
Add missing __devinit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-15 15:14:49 +02:00
Takashi Iwai 934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Takashi Iwai 3733e424c4 ALSA: Use KBUILD_MODNAME for pci_driver.name entries
The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:20:20 +02:00
Randy Dunlap f428c94c84 ALSA: lola - fix lola build
sound/pci/lola/Makefile was trying to build lola modules even
when PCI and SND_LOLA were not enabled, causing build errors:

ERROR: "snd_pcm_hw_constraint_step" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_period_elapsed" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_dma_alloc_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_hw_constraint_integer" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_sgbuf_ops_page" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_set_ops" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_free_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_ioctl" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_malloc_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_sgbuf_get_chunk_size" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_dma_free_pages" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_lib_preallocate_pages_for_all" [sound/pci/lola/snd-lola.ko] undefined!
ERROR: "snd_pcm_new" [sound/pci/lola/snd-lola.ko] undefined!

Fix the Makefile to build only when CONFIG_SND_LOLA is enabled.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-04 19:55:13 +02:00
Takashi Iwai f2e0192519 ALSA: lola - Yet another linux/delay.h inclusion
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 18:48:29 +02:00
Takashi Iwai f044785d0a ALSA: lola - Add missing inclusion of linux/delay.h
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 18:21:01 +02:00
Takashi Iwai fe4af1b55e ALSA: lola - Implement polling_mode like hd-audio
Also protect the call of lola_update_rirb() with spinlock.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 17:06:53 +02:00
Takashi Iwai 2db3002029 ALSA: lola - Rename to Digital SRC Capture Switch
Renamed to Digial SRC Capture Switch for more correct representation.
Also fixed analog volume control on Lola161611 and lola881.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 17:05:08 +02:00
Takashi Iwai c7aad3c317 ALSA: lola - Add sync in loop implementation
For assuring the synchronized state with the pause operation,
loop over the all linked streams and waits until all get ready
in a loop.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 17:02:35 +02:00
Takashi Iwai 7e79f22676 ALSA: lola - Add SRC refcounting
Added the refcounting for the exclusive SRC control.
Also, fixed the possible stall after PCM pause operations.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:59:27 +02:00
Takashi Iwai 8bd172dc96 ALSA: lola - Allow granularity changes
Add some sanity checks.
Change PCM parameters appropriately per granularity.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:51:56 +02:00
Takashi Iwai 972505ccde ALSA: lola - Use SG-buffer
Completely switch to SG-buffer now, as it's working stably.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:50:51 +02:00
Takashi Iwai fe3d393eda ALSA: lola - Add Lola-specific module options
Added granularity and sample_rate_min module options.

The former controls the h/w access granularity.  As default, it's set
to the max value 32.

The latter controls the minimum sample rate in Hz, as default 16000.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:48:59 +02:00
Takashi Iwai 0f8f56c959 ALSA: lola - Fix PCM stalls
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:47:03 +02:00
Takashi Iwai 333ff3971f ALSA: lola - Use a single BDL
Use a single BDL for both buffers instead of allocating for each.

Also a few tune-up to avoid the stream stalls in the PCM code and
the prelimianry work for SG-buffer support are added, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:41:02 +02:00
Takashi Iwai a426c78723 ALSA: lola - Suppress the debug print
Use snd_printdd() for less important debug messages.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:40:53 +02:00
Takashi Iwai c772bbe69a ALSA: lola - Changes in proc file
The codec proc file becomes a read only that shows the codec widgets
in a text form.  A new proc file, codec_rw, is introduced instead for
accessing the Lola verb directly by reading and writing to it.

Also, regs proc file shows the contents of DSD, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:40:52 +02:00
Takashi Iwai 1c5d7b312f ALSA: lola - Make SRC helper global
Make lola_sample_rate_convert() global so that it can be accessed from
other files.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:40:52 +02:00
Takashi Iwai d43f3010b8 ALSA: Add the driver for Digigram Lola PCI-e boards
Added a new driver for supporting Digigram Lola PCI-e boards.

Lola has a similar h/w design like HD-audio but with extended verbs.
Thus the driver is written similarly like HD-audio driver in the bus
part.  The codec part is rather written in a fixed way specific to the
Lola board because of the verb incompatibility.

The driver provides basic PCM, supporting multi-streams and mixing.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-03 16:31:05 +02:00