Updates to the UEFI 2.8 Memory Error Record allow splitting the bank field
into bank address and bank group, and using the last 3 bits of the extended
field as a chip identifier.
When needed, print correct version of bank field, bank group, and chip
identification.
Based on UEFI 2.8 Table 299. Memory Error Record.
Signed-off-by: Alex Kluver <alex.kluver@hpe.com>
Reviewed-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200819143544.155096-3-alex.kluver@hpe.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Memory errors could be printed with incorrect row values since the DIMM
size has outgrown the 16 bit row field in the CPER structure. UEFI
Specification Version 2.8 has increased the size of row by allowing it to
use the first 2 bits from a previously reserved space within the structure.
When needed, add the extension bits to the row value printed.
Based on UEFI 2.8 Table 299. Memory Error Record
Signed-off-by: Alex Kluver <alex.kluver@hpe.com>
Tested-by: Russ Anderson <russ.anderson@hpe.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Kyle Meyer <kyle.meyer@hpe.com>
Acked-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20200819143544.155096-2-alex.kluver@hpe.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
While debugging a boot failure, the following unknown error record was
seen in the boot logs.
<...>
BERT: Error records from previous boot:
[Hardware Error]: event severity: fatal
[Hardware Error]: Error 0, type: fatal
[Hardware Error]: section type: unknown, 81212a96-09ed-4996-9471-8d729c8e69ed
[Hardware Error]: section length: 0x290
[Hardware Error]: 00000000: 00000001 00000000 00000000 00020002 ................
[Hardware Error]: 00000010: 00020002 0000001f 00000320 00000000 ........ .......
[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................
[Hardware Error]: 00000030: 00000000 00000000 00000000 00000000 ................
<...>
On further investigation, it was found that the error record with
UUID (81212a96-09ed-4996-9471-8d729c8e69ed) has been defined in the
UEFI Specification at least since v2.4 and has recently had additional
fields defined in v2.7 Section N.2.10 Firmware Error Record Reference.
Add support for parsing and printing the defined fields to give users
a chance to figure out what went wrong.
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: linux-acpi@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20200512045502.3810339-1-punit1.agrawal@toshiba.co.jp
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"__u32" and similar types are intended for things exported to user-space,
including structs used in ioctls; see include/uapi/asm-generic/int-l64.h.
They are not needed for the CPER struct definitions, which not exported to
user-space and not used in ioctls. Replace them with the typical "u32" and
similar types. No functional change intended.
The reason for changing this is to remove the question of "why do we use
__u32 here instead of u32?" We should use __u32 when there's a reason for
it; otherwise, we should prefer u32 for consistency.
Reference: Documentation/process/coding-style.rst
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Add UEFI spec references for CPER UUIDs and structures, fix a few typos,
and remove some useless comments. No functional change intended.
Link: http://www.uefi.org/specifications
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Recognize the IA32/X64 Processor Error Section.
Do the section decoding in a new "cper-x86.c" file and add this to the
Makefile depending on a new "UEFI_CPER_X86" config option.
Print the Local APIC ID and CPUID info from the Processor Error Record.
The "Processor Error Info" and "Processor Context" fields will be
decoded in following patches.
Based on UEFI 2.7 Table 252. Processor Error Record.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180504060003.19618-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Based on UEFI 2.7 Table 255. Processor Error Record, the "Local APIC_ID"
field is 8 bytes but Linux defines this field as 1 byte.
Fix this in the struct cper_sec_proc_ia definition.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180504060003.19618-4-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ARM errors just print out the error information value, then the
value needs to be manually decoded as per the UEFI spec. Add
decoding of the ARM error information value so that the kernel
logs capture all of the valid information at first glance.
ARM error information value decoding is captured in UEFI 2.7
spec tables 263-265.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasyl Gomonovych <gomonovych@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180102181042.19074-6-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The ARM CPER code is currently mixed in with the other CPER code. Move it
to a new file to separate it from the rest of the CPER code.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasyl Gomonovych <gomonovych@gmail.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180102181042.19074-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add support for ARM Common Platform Error Record (CPER).
UEFI 2.6 specification adds support for ARM specific
processor error information to be reported as part of the
CPER records. This provides more detail on for processor error logs.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org>
Reviewed-by: James Morse <james.morse@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The memory error record structure includes as its first field a
bitmask of which subsequent fields are valid. The allows new fields
to be added to the structure while keeping compatibility with older
software that parses these records. This mechanism was used between
versions 2.2 and 2.3 to add four new fields, growing the size of the
structure from 73 bytes to 80. But Linux just added all the new
fields so this test:
if (gdata->error_data_length >= sizeof(*mem_err))
cper_print_mem(newpfx, mem_err);
else
goto err_section_too_small;
now make Linux complain about old format records being too short.
Add a definition for the old format of the structure and use that
for the minimum size check. Pass the actual size to cper_print_mem()
so it can sanity check the validation_bits field to ensure that if
a BIOS using the old format sets bits as if it were new, we won't
access fields beyond the end of the structure.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add trace interface to elaborate all H/W error related information.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Some codes can be reorganzied as a common function for other usages.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
In latest UEFI spec(by now it is 2.4) memory error definition
for CPER (UEFI 2.4 Appendix N Common Platform Error Record)
adds some new fields. These fields help people to locate
memory error to an actual DIMM location.
Original-author: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
We have a lot of confusing names of functions and data structures in
amongs the the error reporting code. In particular the "apei" prefix
has been applied to many objects that are not part of APEI. Since we
will be using these routines for extended error log reporting it will
be clearer if we fix up the names first.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The AER error information printing support is implemented in
drivers/pci/pcie/aer/aer_print.c. So some string constants, functions
and macros definitions can be re-used without being exported.
The original PCIe AER error information printing function is not
re-used directly because the overall format is quite different. And
changing the original printing format may make some original users'
scripts broken.
Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
On some machine, PCIe error is reported via APEI (ACPI Platform Error
Interface). The error data is passed from firmware to Linux via CPER
PCIe error section structure.
This patch adds CPER PCIe error section structure and constants
definition.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The abbreviation of severity should be SEV instead of SER, so the CPER
severity constants are renamed accordingly. GHES severity constants
are renamed in the same way too.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
CPER stands for Common Platform Error Record, it is the hardware error
record format used to describe platform hardware error by various APEI
tables, such as ERST, BERT and HEST etc.
For more information about CPER, please refer to Appendix N of UEFI
Specification version 2.3.
This patch mainly includes the data structure difinition header file
used by other files.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Alex Kluver
Punit Agrawal
Thomas Gleixner
Bjorn Helgaas
Yazen Ghannam
Tyler Baicar
Andy Shevchenko
Luck, Tony
Chen, Gong
Lucas De Marchi
Huang Ying