Lichee zero plus is a core board made by Sipeed, which includes on-board
TF slot or SMT SD NAND, and optional SPI NOR or eMMC, a UART debug
header, a microUSB slot and a gold finger connector for expansion. It
can use either Sochip S3 or Allwinner S3L SoC.
Add the basic device tree for the core board, w/o optional onboard
storage, and with S3 SoC.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Allwinner S3/S3L/V3 SoCs all share the same die with the V3s SoC,
but with more GPIO wired out of the package.
Add a DTSI file for these SoCs. It just replaces some compatible strings
of the V3s DTSI now. As these SoCs share the same feature set on Linux,
we use the first known chip (V3) as the file's name.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The Cubietruck Plus has an HDMI connector tied to the HDMI output of the
SoC.
Enables display output via HDMI on the Cubietruck Plus. The connector
device node is named "hdmi-connector" as there is also a display port
connector, which is tied to the MIPI DSI output of the SoC through a
MIPI-DSI-to-DP bridge. This part is not supported yet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Since A31, memory mapping of the IR driver has changed.
Prefer the A31 bindings instead of A13.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Since A31, memory mapping of the IR driver has changed.
Prefer the A31 bindings instead of A13.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Acked-by: Sean Young <sean@mess.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Even though the binding mentions that the PHY name must be "phy", it turns
out that all our DTs had "hdmi-phy" instead.
The code doesn't care about the phy-names property, so we can just change
our DTs to match the binding, without any side effect.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
simple-panel based bindings need only the display compatible, and
simple-panel isn't documented anywhere. Remove it.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DE2 bus takes two clocks, named bus and mod according to the binding.
However, the order of these clocks change from one SoC to another. Even
though it might not be an issue in most cases, having consistency will help
if we ever need to have some code to deal with deprecated bindings, and in
general it's just better.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The phy device tree property has been deprecated in favor of phy-handle,
let's replace it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The DWMAC specific properties to manage the PHY have been superseeded by
the generic PHY properties. Let's move to it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM Mali
GPU devices added to device trees, since the DRM drivers have now been
merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Polish and fixes for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now at
feature parity with TX1
-----BEGIN PGP SIGNATURE-----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=sHZs
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM Devicetree updates from Olof Johansson:
"We continue to see a lot of new material. I've highlighted some of it
below, but there's been more beyond that as well.
One of the sweeping changes is that many boards have seen their ARM
Mali GPU devices added to device trees, since the DRM drivers have now
been merged.
So, with the caveat that I have surely missed several great
contributions, here's a collection of the material this time around:
New SoCs:
- Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53)
- TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA)
- Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53)
New Boards / platforms:
- Aspeed BMC support for a number of new server platforms
- Kontron SMARC SoM (several i.MX6 versions)
- Novtech's Meerkat96 (i.MX7)
- ST Micro Avenger96 board
- Hardkernel ODROID-N2 (Amlogic G12B)
- Purism Librem5 devkit (i.MX8MQ)
- Google Cheza (Qualcomm SDM845)
- Qualcomm Dragonboard 845c (Qualcomm SDM845)
- Hugsun X99 TV Box (Rockchip RK3399)
- Khadas Edge/Edge-V/Captain (Rockchip RK3399)
Updated / expanded boards and platforms:
- Renesas r7s9210 has a lot of new peripherals added
- Fixes and polish for Rockchip-based Chromebooks
- Amlogic G12A has a lot of peripherals added
- Nvidia Jetson Nano sees various fixes and improvements, and is now
at feature parity with TX1"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits)
ARM: dts: gemini: Set DIR-685 SPI CS as active low
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
arm64: dts: qcom: qcs404: Add missing space for cooling-cells property
arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire
arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs
arm64: dts: rockchip: enable rk3328 watchdog clock
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
arm64: dts: rockchip: Add support for Hugsun X99 TV Box
arm64: dts: rockchip: Define values for the IPA governor for rock960
arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi
arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs
arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance.
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
arm64: dts: qcom: sdm845-cheza: add initial cheza dt
ARM: dts: msm8974-FP2: Add vibration motor
...
The SPI to the display on the DIR-685 is active low, we were
just saved by the SPI library enforcing active low on everything
before, so set it as active low to avoid ambiguity.
Link: https://lore.kernel.org/r/20190715202101.16060-1-linus.walleij@linaro.org
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Here is the big USB and PHY driver pull request for 5.3-rc1.
Lots of stuff here, all of which has been in linux-next for a while with
no reported issues. Nothing is earth-shattering, just constant forward
progress for more devices supported and cleanups and small fixes:
- USB gadget driver updates and fixes
- new USB gadget driver for some hardware, followed by a quick revert
of those patches as they were not ready to be merged...
- PHY driver updates
- Lots of new driver additions and cleanups with a few fixes mixed in.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXjYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynMYACgnSRP3GylwMywrkc9paVmDeiIgNwAn0N2sika
JEW7C3lkBJZJ7R6V/Ynm
=drla
-----END PGP SIGNATURE-----
Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here is the big USB and PHY driver pull request for 5.3-rc1.
Lots of stuff here, all of which has been in linux-next for a while
with no reported issues. Nothing is earth-shattering, just constant
forward progress for more devices supported and cleanups and small
fixes:
- USB gadget driver updates and fixes
- new USB gadget driver for some hardware, followed by a quick revert
of those patches as they were not ready to be merged...
- PHY driver updates
- Lots of new driver additions and cleanups with a few fixes mixed
in"
* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
Revert "usb: gadget: storage: Remove warning message"
Revert "dt-bindings: add binding for USBSS-DRD controller."
Revert "usb:gadget Separated decoding functions from dwc3 driver."
Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
usb :fsl: Change string format for errata property
usb: host: Stops USB controller init if PLL fails to lock
usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
usb: phy: Workaround for USB erratum-A005728
usb: fsl: Set USB_EN bit to select ULPI phy
usb: Handle USB3 remote wakeup for LPM enabled devices correctly
drivers/usb/typec/tps6598x.c: fix 4CC cmd write
drivers/usb/typec/tps6598x.c: fix portinfo width
usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
usb: renesas_usbhs: add a workaround for a race condition of workqueue
usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
USB: gadget: function: fix issue Unneeded variable: "value"
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
1. Fix imprecise abort on Exynos4210 caused by newly added Mali nodes,
2. Reorganize Mali nodes under /soc,
3. Adjust buck regulators voltages on Arndale Octa and Odroid XU3/XU4
family to sane values.
-----BEGIN PGP SIGNATURE-----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=4yv0
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.3, third round
1. Fix imprecise abort on Exynos4210 caused by newly added Mali nodes,
2. Reorganize Mali nodes under /soc,
3. Adjust buck regulators voltages on Arndale Octa and Odroid XU3/XU4
family to sane values.
* tag 'samsung-dt-5.3-3' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa
ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family
ARM: dts: exynos: Move Mali400 GPU node to "/soc"
ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210
Link: https://lore.kernel.org/r/20190707180115.5562-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
OHCI driver was converted over to use GPIO regulators.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vwpF
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes
This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.
* tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da830-evm: fix GPIO lookup for OHCI
ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
ARM: davinci: da830-evm: add missing regulator constraints for OHCI
+ Linux 5.2-rc7
Signed-off-by: Olof Johansson <olof@lixom.net>
for rk3288-veyron boards.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl0Z0DEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgbHRB/40x1DBDesIZnjpbnFPTBGcqhMXgc/tfawK
jtU7fwFiToyvXXzauY877+njhC54MCwF9JhtRfxn0c5O7WRBCnZnzRIfQpqKxdXD
VmIx5cKMI057oG0p4RB9tSDTHNAfg0lw9M9DQVw4f/Yl2M0kY/yk3TnL2vReMxMQ
mGd0j8KDAHnpdBgYpKQPSxQdbV8i5EFkb0RcvrEZ/VPHrikg74y91nbgSjBu3EgI
+NecSglseOG+SVzPzxbnU1kZ4E7Z/zXq6UQmpoVw2710MNn+QWrd1+F7bAcnszaO
KJCdHRM8Icpx9mNnekjonzYuNWOAEZf+LFS2FncR6qjrzFgBWi7c
=8Tz/
-----END PGP SIGNATURE-----
Merge tag 'v5.3-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Display support for rk3228/rk3229 (up to hdmi output) and more love
for rk3288-veyron boards.
* tag 'v5.3-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add display nodes for rk322x
ARM: dts: rockchip: fix vop iommu-cells on rk322x
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie"
ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron
ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on veyron
Signed-off-by: Olof Johansson <olof@lixom.net>
Use the armada-38x-uart compatible strings for Armada XP 98dx3236 SoCs
in order to not loose character anymore.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXRYouQAKCRALBhiOFHI7
1XlVAJ0Qjg4gFXUrf7MUpn8LuUi6UTEf3ACdGLW5ZT78BM78TiEGG79H+WsJ/ow=
=jxUU
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu into arm/fixes
mvebu fixes for 5.2 (part 2)
Use the armada-38x-uart compatible strings for Armada XP 98dx3236 SoCs
in order to not loose character anymore.
* tag 'mvebu-fixes-5.2-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node
Signed-off-by: Olof Johansson <olof@lixom.net>
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78]
voltage regulators values.
1. The voltage tables for configuring their registers mention range of
voltages: 0.750 V to 3.55 V,
2. The constrains in electrical specifications say output voltage range
to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V).
Adjust the ranges to match the electrical specifications to stay on the
safe side. Anyway these regulators stay at default value so this should
not have effect.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The datasheet of S2MPS11 PMIC is slightly non-consistent in buck[78]
voltage regulators values.
1. The voltage tables for configuring their registers mention range of
voltages: 0.750 V to 3.55 V,
2. The constrains in electrical specifications say output voltage range
to be different (buck7: 1.2 V to 1.5 V, buck8: 1.8 V to 2.1 V).
Adjust the ranges to match the electrical specifications to stay on the
safe side. Also change the name of regulators to match reality. Anyway
these regulators stay at default value so this should not have effect.
Reported-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Mali400 GPU hardware module is a standard hardware module integrated to
Exynos3210/4210/4412 SoCs, so it should reside under the "/soc" node.
The only SoC components which are placed in the DT root, are those, which
are a part of CPUs: like ARM architected timers and ARM performance
measurement units.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The PMU module of Mali400 GPU is optional and it looks that it is not
present on Exynos4210, because any access to its registers causes external
abort. This patch removes "pmu" interrupt for Exynos4210 SoCs, so the
driver will skip the PMU module. This fixes following fault during kernel
boot:
Unhandled fault: imprecise external abort (0x1406) at 0x00000000
(lima_pmu_init) from [<c059e6f8>] (lima_device_init+0x244/0x5a0)
(lima_device_init) from [<c059e40c>] (lima_pdev_probe+0x7c/0xd8)
(lima_pdev_probe) from [<c05afcb8>] (platform_drv_probe+0x48/0x9c)
(platform_drv_probe) from [<c05ad594>] (really_probe+0x1c4/0x400)
(really_probe) from [<c05ad988>] (driver_probe_device+0x78/0x1b8)
(driver_probe_device) from [<c05add30>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<c05ade34>] (__driver_attach+0xfc/0x160)
(__driver_attach) from [<c05ab650>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<c05ac734>] (bus_add_driver+0x104/0x20c)
(bus_add_driver) from [<c05aece0>] (driver_register+0x78/0x10c)
(driver_register) from [<c0103214>] (do_one_initcall+0x8c/0x430)
(do_one_initcall) from [<c0f01328>] (kernel_init_freeable+0x3c8/0x4d0)
(kernel_init_freeable) from [<c0ac3aa0>] (kernel_init+0x8/0x10c)
(kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)
The PMU module seems to work fine on Exynos4412 SoCs, so the patch also
moves the interrupt definitions to exynos4210.dtsi and exynos4412.dtsi
respectively, to keep only the common part in exynos4.dtsi.
Fixes: 13efd80aca ("ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The biggest part here is a set of patches removing unnecesary variables
from several drivers.
Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap.
Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based
SoCs.
DWC3 also got support for Intel Elkhart Lake platforms.
-----BEGIN PGP SIGNATURE-----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=3HLl
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: changes for v5.3 merge window
The biggest part here is a set of patches removing unnecesary variables
from several drivers.
Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap.
Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based
SoCs.
DWC3 also got support for Intel Elkhart Lake platforms.
* tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (30 commits)
usb: dwc3: remove unused @lock member of dwc3_ep struct
usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices
usb: Replace snprintf with scnprintf in gether_get_ifname
usb: gadget: ether: Fix race between gether_disconnect and rx_submit
usb: gadget: storage: Remove warning message
usb: dwc3: gadget: Add support for disabling U1 and U2 entries
usb: gadget: send usb_gadget as an argument in get_config_params
doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2
usb: dwc3: qcom: Use of_clk_get_parent_count()
usb: dwc3: Fix core validation in probe, move after clocks are enabled
usb: dwc3: qcom: Improve error handling
usb: dwc3: qcom: Start USB in 'host mode' on the SDM845
usb: dwc3: qcom: Add support for booting with ACPI
soc: qcom: geni: Add support for ACPI
Revert "usb: dwc2: host: Setting qtd to NULL after freeing it"
usb: gadget: net2272: remove redundant assignments to pointer 's'
usb: gadget: Zero ffs_io_data
USB: omap_udc: Remove unneeded variable
fotg210-udc: Remove unneeded variable
usb: gadget: at91_udc: Remove unneeded variable
...
* Add vibrator motor for MSM8974 based Fairphone 2
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W5di
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm Device Tree Changes for v5.3
* Add vibrator motor for MSM8974 based Fairphone 2
* tag 'qcom-dts-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: msm8974-FP2: Add vibration motor
Signed-off-by: Olof Johansson <olof@lixom.net>
A smaller batch of fixes, nothing that stands out as risky or scary.
Mostly DTS tweaks for a few issues:
- GPU fixlets for Meson
- CPU idle fix for LS1028A
- PWM interrupt fixes for i.MX6UL
Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
two MAINTAINER tweaks.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0ULP8PHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3h3sP/AkPQ+18tw5r6eY01k7a+JtDIbzKUizc6qh5
/IBOpynFVv28+VRVrmu1xqek+5iJ7pVkQrJO5Nf0ChbFjo6Hqdk/84tivccyozrY
4eO/7BALoV57g6inDTLWvhYL3V8bwLYT/1XCP4cN1Di9WBqBhZoe+h8BQr3ztrep
p3QDjs3WDSzsJ8Oy8NBDUFXtWnZznXaSRzXFKGaUEVIpnlV4OHNW5XbXkLFFHygO
SmoJdJRPIoKki6Gq0GvZH4U/0U53sa927uwT/02DaxIzlPFfhQtyNw8ZCo//6adg
tyUTJn7zzOTxFSJZ512EJ4OG6MG9T/3wDGPlT+KJ4Bgv19jSeksdnvCfZrtAuPfu
j1APenXGRNImSDJOeDrxeKAbW29RpxQjYzvMvGT3iYqH93sD/lz6uIoObCcGzwXQ
BGIvMKOs3luw6Bk3pJpfBmzMPBkrDWerDgL3qdHnQEYenmbeTCyKFQVOM7f+PQqg
jKT7gitFq1bT4JXImcInEdY/2nFlBJUgdIwwK273uS0RmeOHmF8TNJpKeaYbO7ds
fcG177RaLqPoIfx6GbT7kZRVSgBHJrUh6gRmuQcoJaaP4zXdX0+N3S1WYQkGMkos
t0SU9YPsqDyCpmtCN7TTY5MwhR/jTGLmxArCGBf1+IrfFx1cdmaFPjnJvEI8fCJM
CJRPfzKQ
=Jr9u
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A smaller batch of fixes, nothing that stands out as risky or scary.
Mostly DTS tweaks for a few issues:
- GPU fixlets for Meson
- CPU idle fix for LS1028A
- PWM interrupt fixes for i.MX6UL
Also, enable a driver (FSL_EDMA) on arm64 defconfig, and a warning and
two MAINTAINER tweaks"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: imx6ul: fix PWM[1-4] interrupts
ARM: omap2: remove incorrect __init annotation
ARM: dts: gemini Fix up DNS-313 compatible string
ARM: dts: Blank D-Link DIR-685 console
arm64: defconfig: Enable FSL_EDMA driver
arm64: dts: ls1028a: Fix CPU idle fail.
MAINTAINERS: BCM53573: Add internal Broadcom mailing list
MAINTAINERS: BCM2835: Add internal Broadcom mailing list
ARM: dts: meson8b: fix the operating voltage of the Mali GPU
ARM: dts: meson8b: drop undocumented property from the Mali GPU node
ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
Switch to the "marvell,armada-38x-uart" driver variant to empty
the UART buffer before writing to the UART_LCR register.
Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>.
Cc: stable@vger.kernel.org
Fixes: 43e28ba877 ("ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add display_subsystem, hdmi_phy, vop, and hdmi device nodes plus
a few hdmi pinctrl entries to allow for HDMI output.
Signed-off-by: Justin Swartz <justin.swartz@risingedge.co.za>
[added assigned-clock settings for hdmiphy output]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
1. Add camera flash to Galaxy S3 boards,
2. Fix PMU affinity interrupt warning on Exynos4,
3. Improve regulator configuration on Odroid XU3/XU4/HC1 family and
Arndale Octa by disabling unneeded regulators and adding suspend
configuration. The suspend configuration brings significant reduce of
energy usage in Suspend to RAM (e.g. 120 -> ~7 mA on Odroid HC1).
4. Add Mali nodes to Exynos3 and Exynos4.
-----BEGIN PGP SIGNATURE-----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=ZMHl
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.3, second round
1. Add camera flash to Galaxy S3 boards,
2. Fix PMU affinity interrupt warning on Exynos4,
3. Improve regulator configuration on Odroid XU3/XU4/HC1 family and
Arndale Octa by disabling unneeded regulators and adding suspend
configuration. The suspend configuration brings significant reduce of
energy usage in Suspend to RAM (e.g. 120 -> ~7 mA on Odroid HC1).
4. Add Mali nodes to Exynos3 and Exynos4.
* tag 'samsung-dt-5.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add GPU/Mali 400 node to Exynos4
ARM: dts: exynos: Add GPU/Mali 400 node to Exynos3250
dt-bindings: gpu: mali: Add Samsung compatibles for Midgard and Utgard
ARM: dts: exynos: Use proper regulator for eMMC memory on Arndale Octa
ARM: dts: exynos: Add regulator suspend configuration to Odroid XU3/XU4/HC1 family
ARM: dts: exynos: Add regulator suspend configuration to Arndale Octa board
ARM: dts: exynos: Disable unused buck10 regulator on Odroid HC1 board
ARM: dts: exynos: Fix language typo and indentation
ARM: dts: exynos: Add PMU interrupt affinity to Exynos4 boards
ARM: dts: exynos: Add flash support to Galaxy S3 boards
Signed-off-by: Olof Johansson <olof@lixom.net>
- Migrate to the new binding for the Denali NAND controller
-----BEGIN PGP SIGNATURE-----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=Ezcw
-----END PGP SIGNATURE-----
Merge tag 'uniphier-dt-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM SoC DT updates for v5.3
- Migrate to the new binding for the Denali NAND controller
* tag 'uniphier-dt-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
ARM: dts: uniphier: update to new Denali NAND binding
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit 288ceb85b5.
The commit assumes that the minnie panel is a AUO B101EAN01.1 (LVDS
interface), however it is a AUO B101EAN01.8 (eDP interface). The eDP
panel doesn't need the 200 ms delay.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is the other half of the hacky solution from commit f497ab6b4b
("ARM: dts: rockchip: Configure BT_HOST_WAKE as wake-up signal on
veyron"). Specifically the LPM driver that the Broadcom Bluetooth
expects to have (but is missing in mainline) has two halves of the
equation: BT_HOST_WAKE and BT_DEV_WAKE. The BT_HOST_WAKE (which was
handled in the previous commit) is the one that lets the Bluetooth
wake the system up. The BT_DEV_WAKE (this patch) tells the Bluetooth
that it's OK to go into a low power mode. That means we were burning
a bit of extra power in S3 without this patch. Measurements are a bit
noisy, but it appears to be a few mA worth of difference.
NOTE: Though these pins don't do much on systems with Marvell
Bluetooth, downstream kernels set it on all veyron boards so we'll do
the same.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With commit d8e8fd0ebf ("mtd: rawnand: denali: decouple controller
and NAND chips"), the Denali NAND controller driver migrated to the
new controller/chip representation.
Update DT for it.
In the new binding, the number of connected chips are described in
DT instead of run-time probed.
I added just one chip to the reference boards, where we do not know
if the on-board NAND device is a single chip or multiple chips.
If we added too many chips into DT, it would end up with the timeout
error in nand_scan_ident().
I changed all the pinctrl properties to use the single CS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
Meerkat96 board, and NXP LS1021A-TSN board.
- A series from Andrey Smirnov to update vf610-zii-dev and
imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
adding QSPI device, and dropping unused pinmux.
- Update imx6sl and imx6qdl device tree to assign corresponding clocks
instead of dummy clock.
- Update i.MX6/7 boards from NXP to assign corresponding power supply
for LDOs.
- Update i.MX6/7 device trees to enable SNVS poweroff key support
according to board design.
- Update coresight DT binding for i.MX7 according to consolidations
for CoreSight replicator and funnel.
- A series from Marek Vasut to update M53Menlo board on various devices
like UART, USB, ethernet PHY, GPIOs etc.
- Enable USBOTG support for imx7ulp and evk board.
- A series from Peter Robinson to update imx6sx-udoo board, switching
to SPDX License Identifier, enabling I2C devices and bluetooth
support.
- Add video capture support for i.MX53 and imx53-smd board.
- Add PXP device for i.MX6UL.
- Other random small updates on various boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEbs9AAoJEFBXWFqHsHzOkIoIAKBS9jB7Lp6DSGpYIgwdjBmK
PY0ogud8FZEfHFdDi9WGt3d1KFkr0xBJPvJ1Tn48BdpN/k3TMrFs1sj/PRNlIRe5
llnBpCD5oV7SHAdIkFcGIQeWwHMfnpxe1NdhMiCpT6pKtk2oieRWVs0RvdZ5UgRI
aULSFbxs/ZEjvVa3Jcx7KjFmceCHP8naICtYm7ZYjn3vDI7y1ZosaD9pWFSL3N/k
l/F3B05Zh6HA4HpldGxCbxSVr94GE9HgLXGigo/nEGjiHmhecc2rievsegJP9AKa
z1bTtIK+qrsYmUtXWGPgNTXLpVfjRf+0Q6z60uVDhsfuNJx2IVJkyBeAebXCSMk=
=pBgY
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm32 DT changes for 5.3:
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
Meerkat96 board, and NXP LS1021A-TSN board.
- A series from Andrey Smirnov to update vf610-zii-dev and
imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
adding QSPI device, and dropping unused pinmux.
- Update imx6sl and imx6qdl device tree to assign corresponding clocks
instead of dummy clock.
- Update i.MX6/7 boards from NXP to assign corresponding power supply
for LDOs.
- Update i.MX6/7 device trees to enable SNVS poweroff key support
according to board design.
- Update coresight DT binding for i.MX7 according to consolidations
for CoreSight replicator and funnel.
- A series from Marek Vasut to update M53Menlo board on various devices
like UART, USB, ethernet PHY, GPIOs etc.
- Enable USBOTG support for imx7ulp and evk board.
- A series from Peter Robinson to update imx6sx-udoo board, switching
to SPDX License Identifier, enabling I2C devices and bluetooth
support.
- Add video capture support for i.MX53 and imx53-smd board.
- Add PXP device for i.MX6UL.
- Other random small updates on various boards.
* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
ARM: dts: imx7ulp-evk: enable USBOTG1 support
ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
ARM: dts: Add support for 96Boards Meerkat96 board
ARM: dts: imx6ul: Add PXP node
ARM: dts: imx6sll: Enable SNVS poweroff according to board design
ARM: dts: imx7s: Enable SNVS power key according to board design
ARM: dts: imx6sll: Enable SNVS power key according to board design
ARM: dts: imx6ul: Enable SNVS power key according to board design
ARM: dts: imx6sx: Enable SNVS power key according to board design
ARM: dts: imx6qdl: Enable SNVS power key according to board design
ARM: dts: imx53: Bind CPLD on M53Menlo
ARM: dts: Introduce the NXP LS1021A-TSN board
ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
ARM: dts: imx7d: Update cpufreq OPP table
ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
MPU part:
-Add stm32mp157a-avenger board support:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
, 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
10/100/1000, WiFi 5 GHz & 2.4GHz, ...
-Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
it.
-Add I2S and SAI support on stm32mp157c.
-Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
(EV1 and DK2 inherit of it).
-Add camera support:
-Add DCMI support on stm32mp157c SOC
-Enabled OV5640 camera support on stm32mp157c-ev1 board
-Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
board.
MCU part:
-Add STMFX support en stm32746g-eval and enable connections on it:
leds and joystick
-----BEGIN PGP SIGNATURE-----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=3ZUA
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.3, round 1
Highlights:
----------
MPU part:
-Add stm32mp157a-avenger board support:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
, 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
10/100/1000, WiFi 5 GHz & 2.4GHz, ...
-Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
it.
-Add I2S and SAI support on stm32mp157c.
-Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
(EV1 and DK2 inherit of it).
-Add camera support:
-Add DCMI support on stm32mp157c SOC
-Enabled OV5640 camera support on stm32mp157c-ev1 board
-Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
board.
MCU part:
-Add STMFX support en stm32746g-eval and enable connections on it:
leds and joystick
* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
dt-bindings: arm: stm32: Document Avenger96 devicetree binding
dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
ARM: dts: stm32: add sai id registers to stm32mp157c
ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
ARM: dts: stm32: enable display on stm32mp157c-dk1 board
ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
ARM: dts: stm32: add DCMI pins to stm32mp157c
ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
ARM: dts: stm32: add i2s pins muxing on stm32mp157
ARM: dts: stm32: add i2s support on stm32mp157c
ARM: dts: stm32: add sai pins muxing on stm32mp157
ARM: dts: stm32: add sai support on stm32mp157c
ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Add LCD support on Netgear RN104
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQyyfAAKCRALBhiOFHI7
1ZPaAJ9AaFGTVnIuqe8EjZLOiKdO03oWMgCgm8Eu0d9566U2ibYCHCbHN0FbUpU=
=F0cP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt
mvebu dt for 5.3 (part 1)
Add LCD support on Netgear RN104
* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.
Signed-off-by: Olof Johansson <olof@lixom.net>
arm and arm64, a fix for the array syntax raised by our DT schemas.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
=4UQl
-----END PGP SIGNATURE-----
Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQTgAKCRDj7w1vZxhR
xYkmAQDT7s1MRH9OEFQpS80BcWCvQoj0drr1ghHdXwwEbfuBUgEAoIuLrfH1Vjyi
ZcEJwPGowLmSEZezVWSLqTL76iajJg4=
=PAul
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual bunch of patches:
- Some work on the BPi M2-Berry to support various devices
- Convert some bindings to a schema, and a lot of fixes reported by
the schemas we introduced.
- A few other fixes here and there
* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
dt-bindings: pwm: Convert Allwinner PWM to a schema
ARM: dts: sun8i: r40: Change the RTC compatible
ARM: dts: sun8i: v3s: Add external crystals accuracy
ARM: dts: sun8i: v3s: Fix the RTC node
ARM: dts: sun6i: Add external crystals accuracy
ARM: dts: sun6i: Fix RTC node
ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
ARM: dts: gr8-evb: Fix RTC vendor
ARM: dts: sun7i: icnova-swac: Fix the model vendor
ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
ARM: dts: sun6i: Add default address and size cells for SPI
ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
dt-bindings: bus: Convert Allwinner RSB to a schema
ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
...
Signed-off-by: Olof Johansson <olof@lixom.net>
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
-----BEGIN PGP SIGNATURE-----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=Hwcm
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.3
We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.
There are some AST2500 machines under development:
* Lenovo Hr630
* IBM Swift
* Facebook YAMP
And some AST2400 machines that have been around but out of tree and have
now joined the party:
* YADRO VESNIN
* Microsoft Olympus
* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
ARM: dts: aspeed: Add YADRO VESNIN BMC
ARM: dts: aspeed: Add Microsoft Olympus BMC
ARM: dts: aspeed: Adding Lenovo Hr630 BMC
ARM: dts: aspeed: Add Facebook YAMP BMC
ARM: dts: aspeed: swift: Add pca9539 devices
ARM: dts: aspeed: Add Swift BMC machine
ARM: dts: aspeed: cmm: enable ehci host controllers
ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
ARM: dts: aspeed: zaius: update 12V brick I2C address
ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
ARM: dts: aspeed: quanta-q71: Enable p2a node
ARM: dts: aspeed: Add aspeed-p2a-ctrl node
ARM: dts: aspeed: Add Power9 and Power9 CFAM description
ARM: dts: aspeed: Rename flash-controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q1ev
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm Device Tree Changes for v5.3
* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064
* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-hammerhead: add support for display
ARM: dts: msm8974: add display support
ARM: dts: qcom: msm8974-hammerhead: add support for backlight
ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
ARM: dts: qcom-msm8974: Update coresight DT bindings
ARM: dts: qcom-apq8064: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vaAE
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM: DT: Hisilicon ARM32 SoCs updates for v5.3
- Updated CoreSight funnel and replicator using new bindings to fix warning
for the hip04.
* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hip04: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
- A recent testing by Sébastien discovers that the PWM interrupts of
i.MX6UL were wrongly coded in device tree. It's a fix for it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdEXKFAAoJEFBXWFqHsHzOnh4H/RVNWE/NwhLlcqXHnRq4TPpi
CdKQ9ZdXYWfi7SkFQJK8bYefklxfY7JUg4Pa/igTbkyeuwpHQugkYRK7is/jsEcd
TZSCllyvbn4QIOCZJiRsWd3/soEryjaQmZcHTVRLTJXZKhTPB89MuTX7j1BmGd22
SiSCTRtgVRWOY0ORF9oMtjNq1BiHEtf8M7GwvkifhlZCUh3pyqI7sqg+Zer/CEmM
TCOpDc42x56igw36/H/TMKyRQestYNlp8AKxg1cagwNrrLNE4D3Icm5UHdd44KuT
cS5O68BQxUldhfgdejfIZUvVguVlYQkuEZbCW/l18GdiK9IECW/xZRliBqO8RSw=
=Gn7a
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.2, round 3:
- A recent testing by Sébastien discovers that the PWM interrupts of
i.MX6UL were wrongly coded in device tree. It's a fix for it.
* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6ul: fix PWM[1-4] interrupts
Signed-off-by: Olof Johansson <olof@lixom.net>
- fix GPU interrupts and operating voltage
-----BEGIN PGP SIGNATURE-----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=SdFR
-----END PGP SIGNATURE-----
Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes
ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage
* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: fix the operating voltage of the Mali GPU
ARM: dts: meson8b: drop undocumented property from the Mali GPU node
ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
-----BEGIN PGP SIGNATURE-----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=AQ6F
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:
- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
controller
- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
and provides a fix for devices failing to boot after the removal of
skelton.dtsi (that commit has been submitted as a separate fix)
* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Fix most DTC W=1 warnings
ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
ARM: dts: BCM63xx: Fix DTC W=1 warnings
ARM: dts: BCM53573: Fix DTC W=1 warnings
ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
ARM: dts: Cygnus: Fix most DTC W=1 warnings
ARM: dts: Fix BCM7445 DTC warnings
ARM: bcm283x: Enable DMA support for SPI controller
ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>
Icenowy Zheng
Chen-Yu Tsai
Clément Péron
Maxime Ripard
Linus Torvalds
Linus Walleij
Olof Johansson
Krzysztof Kozlowski
Marek Szyprowski
Greg Kroah-Hartman
Joshua Scott
Justin Swartz
Matthias Kaehlcke
Douglas Anderson
Luca Weiss
Masahiro Yamada