- Deprecate 'cdns,max-outbound-regions' and 'cdns,no-bar-match-nbits'
bindings in favor of deriving them from 'ranges' and 'dma-ranges'
(Kishon Vijay Abraham I)
- Read Vendor and Device ID as 32 bits (not 16) from DT (Kishon Vijay
Abraham I)
* remotes/lorenzo/pci/cadence:
PCI: cadence: Fix to read 32-bit Vendor ID/Device ID property from DT
PCI: cadence: Remove "cdns,max-outbound-regions" DT property
dt-bindings: PCI: cadence: Deprecate inbound/outbound specific bindings
- Train link immediately after enabling link training to avoid issues
with Compex WLE900VX and Turris MOX devices (Pali Rohár)
- Remove ASPM config and let the PCI core do it (Pali Rohár)
- Interpret zero 'max-link-speed' value as invalid (Pali Rohár)
- Respect the 'max-link-speed' property and improve link training (Marek
Behún)
- Issue PERST via GPIO (Pali Rohár)
- Add PHY support (Marek Behún)
- Use standard PCIe capability macros (Pali Rohár)
- Document new 'max-link-speed', 'phys', and 'reset-gpios' properties
(Marek Behún)
* remotes/lorenzo/pci/aardvark:
dt-bindings: PCI: aardvark: Describe new properties
PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros
PCI: aardvark: Add PHY support
PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access
PCI: aardvark: Issue PERST via GPIO
PCI: aardvark: Improve link training
PCI: of: Zero max-link-speed value is invalid
PCI: aardvark: Don't blindly enable ASPM L0s and don't write to read-only register
PCI: aardvark: Train link immediately after enabling training
- Check .bridge_d3() hook for NULL before calling it (Bjorn Helgaas)
- Disable PME# for Pericom OHCI/UHCI USB controllers because it's
not reliably asserted on USB hotplug (Kai-Heng Feng)
- Assume ports without DLL Link Active train links in 100 ms to work
around Thunderbolt bridge defects (Mika Westerberg)
* pci/pm:
PCI/PM: Assume ports without DLL Link Active train links in 100 ms
PCI/PM: Adjust pcie_wait_for_link_delay() for caller delay
PCI: Avoid Pericom USB controller OHCI/EHCI PME# defect
serial: 8250_pci: Move Pericom IDs to pci_ids.h
PCI/PM: Call .bridge_d3() hook only if non-NULL
- Add AMD Zen Raven and Renoir Root Ports to P2PDMA whitelist (Alex
Deucher)
* pci/p2pdma:
PCI/P2PDMA: Add AMD Zen Raven and Renoir Root Ports to whitelist
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas)
- Check for platform_get_irq() failure consistently (Bjorn Helgaas)
- Replace zero-length array with flexible-array (Gustavo A. R. Silva)
- Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang)
- Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun
Lee)
- Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang)
- Rename _DSM constants to align with spec (Krzysztof Wilczyński)
* pci/misc:
PCI: Rename _DSM constants to align with spec
PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove()
x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs
PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()
PCI: Replace zero-length array with flexible-array
PCI: Check for platform_get_irq() failure consistently
driver core: platform: Clarify that IRQ 0 is invalid
- Remove unused pciehp EMI() and HP_SUPR_RM() macros (Ani Sinha)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Convert shpchp_unconfigure_device() to void (Krzysztof Wilczynski)
* pci/hotplug:
PCI: shpchp: Make shpchp_unconfigure_device() void
PCI: Use of_node_name_eq() for node name comparisons
PCI: pciehp: Remove unused EMI() and HP_SUPR_RM() macros
- Log only ACPI_NOTIFY_DISCONNECT_RECOVER events for EDR, not all ACPI
SYSTEM-level events (Kuppuswamy Sathyanarayanan)
- Rely only on _OSC (not _OSC + HEST FIRMWARE_FIRST) to negotiate AER
Capability ownership (Alexandru Gagniuc)
- Remove HEST/FIRMWARE_FIRST parsing that was previously used to help
intuit AER Capability ownership (Kuppuswamy Sathyanarayanan)
- Remove redundant pci_is_pcie() and dev->aer_cap checks (Kuppuswamy
Sathyanarayanan)
- Print IRQ number used by DPC (Yicong Yang)
* pci/error:
PCI/DPC: Print IRQ number used by port
PCI/AER: Use "aer" variable for capability offset
PCI/AER: Remove redundant dev->aer_cap checks
PCI/AER: Remove redundant pci_is_pcie() checks
PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
PCI/AER: Use only _OSC to determine AER ownership
PCI/EDR: Log only ACPI_NOTIFY_DISCONNECT_RECOVER events
* cros_ec_typec
- Add notifier for update, and register port partner
* Sensors/iio:
- Fixes to cros_ec_sensorhub around allocation of resources, and send_sample.
* Wilco EC
- Fix to output format of h1_gpio
* Misc
- Misc fixes to appease kernel-doc and other warnings.
- Set user space log size in chromeos_pstore
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXtbFXgAKCRBzbaomhzOw
woJ3AQDUNnb4ocSXLRyg8IDgLWcA7rjT53jzuvPioTUunRoYAAEA/FR8tQWYOz6e
91ZBHrkQB4fm2w9GQsJk5OpOy8qtZwA=
=9IiQ
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Add notifier for update, and register port partner
Sensors/iio:
- Fixes to cros_ec_sensorhub around allocation of resources, and
send_sample
Wilco EC:
- Fix to output format of h1_gpio
Misc:
- Misc fixes to appease kernel-doc and other warnings
- Set user space log size in chromeos_pstore"
* tag 'tag-chrome-platform-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_usbpd_logger: Add __printf annotation to append_str()
platform/chrome: cros_ec_i2c: Appease the kernel-doc deity
platform/chrome: typec: Fix ret value check error
platform/chrome: cros_ec_typec: Register port partner
platform/chrome: cros_ec_typec: Add struct for port data
platform/chrome: cros_ec_typec: Use notifier for updates
platform/chrome: cros_ec_ishtp: free ishtp buffer before sending event
platform/chrome: cros_ec_ishtp: skip old cros_ec responses
platform/chrome: wilco_ec: Provide correct output format to 'h1_gpio' file
platform/chrome: chromeos_pstore: set user space log size
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl7Xe/kACgkQ+iyteGJfRsqNGQCfeElXEDv9j+KHROxL94EYYoKP
Up8AoI/Gnhfmi/WVCyrwvfdtuAbfehcN
=72fM
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add new arm_smc_wdt watchdog driver
- da9062 and da9063 improvements
- clarify documentation about stop() that became optional
- document r8a7742 support
- some overall fixes and improvements
* tag 'linux-watchdog-5.8-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: m54xx: Add missing include
dt-bindings: watchdog: renesas,wdt: Document r8a7742 support
watchdog: Fix runtime PM imbalance on error
watchdog: riowd: remove unneeded semicolon
watchdog: Add new arm_smc_wdt watchdog driver
dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
watchdog: imx2_wdt: update contact email
watchdog: iTCO: fix link error
watchdog: da9062: No need to ping manually before setting timeout
watchdog: da9063: Make use of pre-configured timeout during probe
watchdog: da9062: Initialize timeout during probe
watchdog: clarify that stop() is optional
watchdog: imx_sc_wdt: Fix reboot on crash
watchdog: ts72xx_wdt: fix build error
- Add backlight_device_get_by_name() to the API
- New Device Support
- Add support for WLED5 to Qualcomm WLED
- Fix-ups
- Convert to GPIO descriptors; l4f00242t03
- Device Tree fix-ups; qcom-wled
- Bug Fixes
- Properly disable regulators on .probe() failure
-----BEGIN PGP SIGNATURE-----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=sHzj
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Add backlight_device_get_by_name() to the API
New Device Support:
- Add support for WLED5 to Qualcomm WLED
Fix-ups:
- Convert to GPIO descriptors in l4f00242t03
- Device Tree fix-ups for qcom-wled
Bug Fixes:
- Properly disable regulators on .probe() failure"
* tag 'backlight-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: Add backlight_device_get_by_name()
backlight: qcom-wled: Add support for WLED5 peripheral that is present on PM8150L PMICs
dt-bindings: backlight: qcom-wled: Add WLED5 bindings
backlight: qcom-wled: Add callback functions
dt-bindings: backlight: qcom-wled: Convert the wled bindings to .yaml format
backlight: l4f00242t03: Convert to GPIO descriptors
backlight: lp855x: Ensure regulators are disabled on probe failure
- Constify 'properties' attribute in core header file
- New Drivers
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
- Rework Intel's SCU IPC collection
- Eliminate near duplicate IPC functionality
- Split out MFD related activities into a dedicated MFD driver
- Fix-ups
- Use new I2C API; htc-i2cpld
- Remove superfluous code; sprd-sc27xx-spi
- Improve error handling; stm32-timers
- Device Tree additions/fixes; mt6397
- Defer probe betterment; wm8994-core
- Improve module handling; wm8994-core
- Staticify; stpmic1
- Trivial (spelling, formatting); tqmx86
- Bug Fixes
- Fix incorrect register/PCI IDs; intel-lpss-pci
- Fix unbalanced Regulator API calls; wm8994-core
- Fix double free(); wcd934x
- Remove IRQ domain on failure; stmfx
- Reset chip on resume; stmfx
- Disable/enable IRQs on suspend/resume; stmfx
- Do not use bulk writes on H/W which does not support them; max77620
-----BEGIN PGP SIGNATURE-----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=746a
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Constify 'properties' attribute in core header file
New Drivers:
- Add support for Gateworks System Controller
- Add support for MediaTek MT6358 PMIC
- Add support for Mediatek MT6360 PMIC
- Add support for Monolithic Power Systems MP2629 ADC and Battery charger
Fix-ups:
- Use new I2C API in htc-i2cpld
- Remove superfluous code in sprd-sc27xx-spi
- Improve error handling in stm32-timers
- Device Tree additions/fixes in mt6397
- Defer probe betterment in wm8994-core
- Improve module handling in wm8994-core
- Staticify in stpmic1
- Trivial (spelling, formatting) in tqmx86
Bug Fixes:
- Fix incorrect register/PCI IDs in intel-lpss-pci
- Fix unbalanced Regulator API calls in wm8994-core
- Fix double free() in wcd934x
- Remove IRQ domain on failure in stmfx
- Reset chip on resume in stmfx
- Disable/enable IRQs on suspend/resume in stmfx
- Do not use bulk writes on H/W which does not support them in max77620"
* tag 'mfd-next-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (29 commits)
mfd: mt6360: Remove duplicate REGMAP_IRQ_REG_LINE() entry
mfd: Add support for PMIC MT6360
mfd: max77620: Use single-byte writes on MAX77620
mfd: wcd934x: Drop kfree for memory allocated with devm_kzalloc
mfd: stmfx: Disable IRQ in suspend to avoid spurious interrupt
mfd: stmfx: Fix stmfx_irq_init error path
mfd: stmfx: Reset chip on resume as supply was disabled
mfd: wm8994: Silence warning about supplies during deferred probe
mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable()
mfd: wm8994: Fix driver operation if loaded as modules
dt-bindings: mfd: mediatek: Add MT6397 Pin Controller
mfd: Constify properties in mfd_cell
mfd: stm32-timers: Use dma_request_chan() instead dma_request_slave_channel()
mfd: sprd: Remove unnecessary spi_bus_type setting
mfd: intel-lpss: Update LPSS UART #2 PCI ID for Jasper Lake
mfd: tqmx86: Fix a typo in MODULE_DESCRIPTION
mfd: stpmic1: Make stpmic1_regmap_config static
mfd: htc-i2cpld: Convert to use i2c_new_client_device()
MAINTAINERS: Add entry for mp2629 Battery Charger driver
power: supply: mp2629: Add impedance compensation config
...
-----BEGIN PGP SIGNATURE-----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=RnLl
-----END PGP SIGNATURE-----
Merge tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring updates from David Howells:
- Fix a documentation warning.
- Replace a zero-length array with a flexible one
- Make the big_key key type use ChaCha20Poly1305 and use the crypto
algorithm directly rather than going through the crypto layer.
- Implement the update op for the big_key type.
* tag 'keys-next-20200602' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Implement update for the big_key type
security/keys: rewrite big_key crypto to use library interface
KEYS: Replace zero-length array with flexible-array
Documentation: security: core.rst: add missing argument
- Further Intel PT call-trace fixes
- Improve SELinux docs and tool warnings
- Fix race at exit in 'perf record' using eventfd.
- Add missing build tests to the default set of 'make -C tools/perf build-test'
- Sync msr-index.h getting new AMD MSRs to decode and filter in 'perf trace'.
- Fix fallback to libaudit in 'perf trace' for arches not using per-arch *.tbl files.
- Fixes for 'perf ftrace'.
- Fixes and improvements for the 'perf stat' metrics.
- Use dummy event to get PERF_RECORD_{FORK,MMAP,etc} while synthesizing
those metadata events for pre-existing threads.
- Fix leaks detected using clang tooling.
- Improvements to PMU event metric testing.
- Report summary for 'perf stat' interval mode at the end, summing up
all the intervals.
- Improve pipe mode, i.e. this now works as expected, continuously
dumping samples:
# perf record -g -e raw_syscalls:sys_enter | perf --no-pager script
- Fixes for event grouping, detecting incompatible groups such as:
# perf stat -e '{cycles,power/energy-cores/}' -v
WARNING: group events cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
power/energy-cores/: 0
cycles: 0-7
- Fixes for 'perf probe': blacklist address checking, number of
kretprobe instances, etc.
- JIT processing improvements and fixes plus the addition of a 'perf
test' entry for the java demangler.
- Add support for synthesizing first/last level cache, TLB and remove
access events from HW tracing in the auxtrace code, first to use is
ARM SPE.
- Vendor events updates and fixes, including for POWER9 and Intel.
- Allow using ~/.perfconfig for removing the ',' separators in 'perf
stat' output.
- Opt-in support for libpfm4.
=================================================================================
Adrian Hunter (8):
perf intel-pt: Use allocated branch stack for PEBS sample
perf symbols: Fix debuginfo search for Ubuntu
perf kcore_copy: Fix module map when there are no modules loaded
perf evlist: Disable 'immediate' events last
perf script: Fix --call-trace for Intel PT
perf record: Respect --no-switch-events
perf intel-pt: Refine kernel decoding only warning message
perf symbols: Fix kernel maps for kcore and eBPF
Alexey Budankov (3):
perf docs: Extend CAP_SYS_ADMIN with CAP_PERFMON where needed
perf tool: Make perf tool aware of SELinux access control
perf docs: Introduce security.txt file to document related issues
Anand K Mistry (1):
perf record: Use an eventfd to wakeup when done
Andi Kleen (1):
perf script: Don't force less for non tty output with --xed
Arnaldo Carvalho de Melo (21):
perf evsel: Rename perf_evsel__object_config() to evsel__object_config()
perf evsel: Rename perf_evsel__resort*() to evsel__resort*()
perf evsel: Rename perf_evsel__fprintf() to evsel__fprintf()
perf evsel: Rename *perf_evsel__get_config_term() & friends to evsel__env()
perf evsel: Rename perf_evsel__new*() to evsel__new*()
perf evsel: Rename perf_evsel__[hs]w_cache* to evsel__[hs]w_cache*
perf counts: Rename perf_evsel__*counts() to evsel__*counts()
perf parse-events: Fix incorrect conversion of 'if () free()' to 'zfree()'
perf evsel: Initialize evsel->per_pkg_mask to NULL in evsel__init()
tools feature: Rename HAVE_EVENTFD to HAVE_EVENTFD_SUPPORT
perf build: Group the NO_SYSCALL_TABLE logic
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable
perf trace: Remove union from syscalltbl, all the fields are needed
perf trace: Use zalloc() to make sure all fields are zeroed in the syscalltbl constructor
perf trace: Grow the syscall table as needed when using libaudit
perf build: Remove libaudit from the default feature checks
perf build: Add NO_SYSCALL_TABLE=1 to the build tests
perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
perf build: Add NO_SDT=1 to the default set of build tests
perf build: Add a LIBPFM4=1 build test entry
tools arch x86: Sync the msr-index.h copy with the kernel sources
Changbin Du (2):
perf ftrace: Trace system wide if no target is given
perf ftrace: Detect workload failure
Ed Maste (1):
perf tools: Correct license on jsmn JSON parser
Gustavo A. R. Silva (2):
perf tools: Replace zero-length array with flexible-array
perf branch: Replace zero-length array with flexible-array
Ian Rogers (38):
perf expr: Allow for unlimited escaped characters in a symbol
perf metrics: Fix parse errors in cascade lake metrics
perf metrics: Fix parse errors in skylake metrics
perf expr: Allow ',' to be an other token
perf expr: Increase max other
perf expr: Parse numbers as doubles
perf expr: Debug lex if debugging yacc
perf metrics: Fix parse errors in power8 metrics
perf metrics: Fix parse errors in power9 metrics
perf expr: Print a debug message for division by zero
perf evsel: Dummy events never triggers, no need to ask for PERF_SAMPLE_BRANCH_STACK
perf record: Add dummy event during system wide synthesis
perf c2c: Fix 'perf c2c record -e list' to show the default events used
perf evsel: Fix 2 memory leaks
perf expr: Test parsing of floating point numbers
perf expr: Fix memory leaks in metric bison
perf parse-events: Make add PMU verbose output clearer
perf test: Provide a subtest callback to ask for the reason for skipping a subtest
perf test: Improve pmu event metric testing
perf trace: Fix the selection for architectures to generate the errno name tables
perf beauty: Allow the CC used in the arch errno names script to acccept CFLAGS
perf tools: Grab a copy of libbpf's hashmap
perf expr: Migrate expr ids table to a hashmap
perf metricgroup: Make 'evlist_used' variable a bitmap instead of array of bools
perf expr: Allow numbers to be followed by a dot
perf metricgroup: Free metric_events on error
perf metricgroup: Always place duration_time last
perf metricgroup: Use early return in add_metric
perf metricgroup: Delay events string creation
perf metricgroup: Order event groups by size
perf metricgroup: Remove duped metric group events
perf metricgroup: Add options to not group or merge
perf metricgroup: Remove unnecessary ',' from events
perf list: Add metrics to command line usage
tools compiler.h: Add attribute to disable tail calls
perf tests: Don't tail call optimize in unwind test
perf test: Initialize memory in dwarf-unwind
perf libdw: Fix off-by 1 relative directory includes
Jin Yao (6):
perf parse-events: Use strcmp() to compare the PMU name
perf stat: Fix wrong per-thread runtime stat for interval mode
perf counts: Reset prev_raw_counts counts
perf stat: Copy counts from prev_raw_counts to evsel->counts
perf stat: Save aggr value to first member of prev_raw_counts
perf stat: Report summary for interval mode
Jiri Olsa (13):
perf tools: Do not display extra info when there is nothing to build
perf tools: Do not seek in pipe fd during tracing data processing
perf session: Try to read pipe data from file
perf callchain: Setup callchain properly in pipe mode
perf script: Enable IP fields for callchains
perf tools: Fix is_bpf_image function logic
perf trace: Fix compilation error for make NO_LIBBPF=1 DEBUG=1
perf stat: Fix duration_time value for higher intervals
perf stat: Fail on extra comma while parsing events
perf tests: Consider subtests when searching for user specified tests
perf stat: Do not pass avg to generic_metric
perf parse: Add 'struct parse_events_state' pointer to scanner
perf stat: Ensure group is defined on top of the same cpu mask
Li Bin (1):
perf util: Fix potential SEGFAULT in put_tracepoints_path error path
Masami Hiramatsu (4):
perf probe: Accept the instance number of kretprobe event
perf probe: Fix to check blacklist address correctly
perf probe: Check address correctness by map instead of _etext
perf probe: Do not show the skipped events
Nick Gasson (6):
perf jvmti: Fix jitdump for methods without debug info
perf jvmti: Do not report error when missing debug information
perf tests: Add test for the java demangler
perf jvmti: Fix demangling Java symbols
perf jvmti: Remove redundant jitdump line table entries
perf jit: Fix inaccurate DWARF line table
Paul A. Clarke (5):
perf stat: Increase perf metric output resolution
perf vendor events power9: Add missing metrics to POWER9 'cpi_breakdown'
perf stat: POWER9 metrics: expand "ICT" acronym
perf script: Better align register values in dump
perf config: Add stat.big-num support
Ravi Bangoria (1):
perf powerpc: Don't ignore sym-handling.c file
Stephane Eranian (1):
perf tools: Add optional support for libpfm4
Tan Xiaojun (3):
perf tools: Move arm-spe-pkt-decoder.h/c to the new dir
perf auxtrace: Add four itrace options
perf arm-spe: Support synthetic events
Tiezhu Yang (1):
perf tools: Remove some duplicated includes
Wang ShaoBo (1):
perf bpf-loader: Add missing '*' for key_scan_pos
Xie XiuQi (1):
perf util: Fix memory leak of prefix_if_not_in
=================================================================================
Test results:
The first ones are container based builds of tools/perf with and without libelf
support. Where clang is available, it is also used to build perf with/without
libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang
when clang and its devel libraries are installed.
The objtool and samples/bpf/ builds are disabled now that I'm switching from
using the sources in a local volume to fetching them from a http server to
build it inside the container, to make it easier to build in a container cluster.
Those will come back later.
Several are cross builds, the ones with -x-ARCH and the android one, and those
may not have all the features built, due to lack of multi-arch devel packages,
available and being used so far on just a few, like
debian:experimental-x-{arm64,mipsel}.
The 'perf test' one will perform a variety of tests exercising
tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands
with a variety of command line event specifications to then intercept the
sys_perf_event syscall to check that the perf_event_attr fields are set up as
expected, among a variety of other unit tests.
Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/
with a variety of feature sets, exercising the build with an incomplete set of
features as well as with a complete one. It is planned to have it run on each
of the containers mentioned above, using some container orchestration
infrastructure. Get in contact if interested in helping having this in place.
Ubuntu 19.10 is failing when linking against libllvm, which isn't the default,
needs to be investigated, haven't tested with CC=gcc, but should be the same
problem:
+ make ARCH= CROSS_COMPILE= EXTRA_CFLAGS= LIBCLANGLLVM=1 -C /git/linux/tools/perf O=/tmp/build/perf CC=clang
...
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_ignoringImpCasts0Matcher::matches(clang::Expr const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal32matcher_ignoringImpCasts0Matcher7matchesERKNS_4ExprEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x43): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
/usr/bin/ld: /usr/lib/llvm-9/lib/libclangAnalysis.a(ExprMutationAnalyzer.cpp.o): in function `clang::ast_matchers::internal::matcher_hasLoopVariable0Matcher::matches(clang::CXXForRangeStmt const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const':
(.text._ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE[_ZNK5clang12ast_matchers8internal31matcher_hasLoopVariable0Matcher7matchesERKNS_15CXXForRangeStmtEPNS1_14ASTMatchFinderEPNS1_21BoundNodesTreeBuilderE]+0x48): undefined reference to `clang::ast_matchers::internal::DynTypedMatcher::matches(clang::ast_type_traits::DynTypedNode const&, clang::ast_matchers::internal::ASTMatchFinder*, clang::ast_matchers::internal::BoundNodesTreeBuilder*) const'
...
# export PERF_TARBALL=http://192.168.124.1/perf/perf-5.7.0-rc7.tar.xz
# time dm
1 alpine:3.4 : Ok gcc (Alpine 5.3.0) 5.3.0, clang version 3.8.0 (tags/RELEASE_380/final)
2 alpine:3.5 : Ok gcc (Alpine 6.2.1) 6.2.1 20160822, clang version 3.8.1 (tags/RELEASE_381/final)
3 alpine:3.6 : Ok gcc (Alpine 6.3.0) 6.3.0, clang version 4.0.0 (tags/RELEASE_400/final)
4 alpine:3.7 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.0 (tags/RELEASE_500/final) (based on LLVM 5.0.0)
5 alpine:3.8 : Ok gcc (Alpine 6.4.0) 6.4.0, Alpine clang version 5.0.1 (tags/RELEASE_501/final) (based on LLVM 5.0.1)
6 alpine:3.9 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 5.0.1 (tags/RELEASE_502/final) (based on LLVM 5.0.1)
7 alpine:3.10 : Ok gcc (Alpine 8.3.0) 8.3.0, Alpine clang version 8.0.0 (tags/RELEASE_800/final) (based on LLVM 8.0.0)
8 alpine:3.11 : Ok gcc (Alpine 9.2.0) 9.2.0, Alpine clang version 9.0.0 (https://git.alpinelinux.org/aports f7f0d2c2b8bcd6a5843401a9a702029556492689) (based on LLVM 9.0.0)
9 alpine:3.12 : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (https://gitlab.alpinelinux.org/alpine/aports.git 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
10 alpine:edge : Ok gcc (Alpine 9.3.0) 9.3.0, Alpine clang version 10.0.0 (git://git.alpinelinux.org/aports 7445adce501f8473efdb93b17b5eaf2f1445ed4c)
11 alt:p8 : Ok x86_64-alt-linux-gcc (GCC) 5.3.1 20151207 (ALT p8 5.3.1-alt3.M80P.1), clang version 3.8.0 (tags/RELEASE_380/final)
12 alt:p9 : Ok x86_64-alt-linux-gcc (GCC) 8.4.1 20200305 (ALT p9 8.4.1-alt0.p9.1), clang version 7.0.1
13 alt:sisyphus : Ok x86_64-alt-linux-gcc (GCC) 9.2.1 20200123 (ALT Sisyphus 9.2.1-alt3), clang version 10.0.0
14 amazonlinux:1 : Ok gcc (GCC) 7.2.1 20170915 (Red Hat 7.2.1-2), clang version 3.6.2 (tags/RELEASE_362/final)
15 amazonlinux:2 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 7.0.1 (Amazon Linux 2 7.0.1-1.amzn2.0.2)
16 android-ndk:r12b-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
17 android-ndk:r15c-arm : Ok arm-linux-androideabi-gcc (GCC) 4.9.x 20150123 (prerelease)
18 centos:5 : Ok gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
19 centos:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
20 centos:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39)
21 centos:8 : Ok gcc (GCC) 8.3.1 20190507 (Red Hat 8.3.1-4), clang version 8.0.1 (Red Hat 8.0.1-1.module_el8.1.0+215+a01033fb)
22 clearlinux:latest : Ok gcc (Clear Linux OS for Intel Architecture) 9.3.1 20200501 releases/gcc-9.3.0-196-gcb2c76c8b1, clang version 10.0.0
23 debian:8 : Ok gcc (Debian 4.9.2-10+deb8u2) 4.9.2, Debian clang version 3.5.0-10 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
24 debian:9 : Ok gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516, clang version 3.8.1-24 (tags/RELEASE_381/final)
25 debian:10 : Ok gcc (Debian 8.3.0-6) 8.3.0, clang version 7.0.1-8 (tags/RELEASE_701/final)
26 debian:experimental : FAIL gcc (Debian 9.3.0-13) 9.3.0, clang version 9.0.1-12
27 debian:experimental-x-arm64 : Ok aarch64-linux-gnu-gcc (Debian 9.3.0-8) 9.3.0
28 debian:experimental-x-mips : Ok mips-linux-gnu-gcc (Debian 8.3.0-19) 8.3.0
29 debian:experimental-x-mips64 : Ok mips64-linux-gnuabi64-gcc (Debian 9.3.0-8) 9.3.0
30 debian:experimental-x-mipsel : Ok mipsel-linux-gnu-gcc (Debian 9.2.1-8) 9.2.1 20190909
31 fedora:20 : Ok gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
32 fedora:22 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.5.0 (tags/RELEASE_350/final)
33 fedora:23 : Ok gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6), clang version 3.7.0 (tags/RELEASE_370/final)
34 fedora:24 : Ok gcc (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1), clang version 3.8.1 (tags/RELEASE_381/final)
35 fedora:24-x-ARC-uClibc : Ok arc-linux-gcc (ARCompact ISA Linux uClibc toolchain 2017.09-rc2) 7.1.1 20170710
36 fedora:25 : Ok gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1), clang version 3.9.1 (tags/RELEASE_391/final)
37 fedora:26 : Ok gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2), clang version 4.0.1 (tags/RELEASE_401/final)
38 fedora:27 : Ok gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6), clang version 5.0.2 (tags/RELEASE_502/final)
39 fedora:28 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 6.0.1 (tags/RELEASE_601/final)
40 fedora:29 : Ok gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2), clang version 7.0.1 (Fedora 7.0.1-6.fc29)
41 fedora:30 : Ok gcc (GCC) 9.2.1 20190827 (Red Hat 9.2.1-1), clang version 8.0.0 (Fedora 8.0.0-3.fc30)
42 fedora:30-x-ARC-glibc : Ok arc-linux-gcc (ARC HS GNU/Linux glibc toolchain 2019.03-rc1) 8.3.1 20190225
43 fedora:30-x-ARC-uClibc : Ok arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
44 fedora:31 : Ok gcc (GCC) 9.3.1 20200408 (Red Hat 9.3.1-2), clang version 9.0.1 (Fedora 9.0.1-2.fc31)
45 fedora:32 : Ok gcc (GCC) 10.1.1 20200507 (Red Hat 10.1.1-1), clang version 10.0.0 (Fedora 10.0.0-1.fc32)
46 fedora:rawhide : Ok gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8), clang version 10.0.0 (Fedora 10.0.0-0.3.rc2.fc33)
47 gentoo-stage3-amd64:latest : Ok gcc (Gentoo 9.2.0-r2 p3) 9.2.0
48 mageia:5 : Ok gcc (GCC) 4.9.2, clang version 3.5.2 (tags/RELEASE_352/final)
49 mageia:6 : Ok gcc (Mageia 5.5.0-1.mga6) 5.5.0, clang version 3.9.1 (tags/RELEASE_391/final)
50 mageia:7 : Ok gcc (Mageia 8.3.1-0.20190524.1.mga7) 8.3.1 20190524, clang version 8.0.0 (Mageia 8.0.0-1.mga7)
51 manjaro:latest : Ok gcc (GCC) 9.2.0, clang version 9.0.0 (tags/RELEASE_900/final)
52 openmandriva:cooker : Ok gcc (GCC) 10.0.0 20200502 (OpenMandriva), clang version 10.0.1
53 opensuse:15.0 : Ok gcc (SUSE Linux) 7.4.1 20190424 [gcc-7-branch revision 270538], clang version 5.0.1 (tags/RELEASE_501/final 312548)
54 opensuse:15.1 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
55 opensuse:15.2 : Ok gcc (SUSE Linux) 7.5.0, clang version 7.0.1 (tags/RELEASE_701/final 349238)
56 opensuse:42.3 : Ok gcc (SUSE Linux) 4.8.5, clang version 3.8.0 (tags/RELEASE_380/final 262553)
57 opensuse:tumbleweed : Ok gcc (SUSE Linux) 9.3.1 20200406 [revision 6db837a5288ee3ca5ec504fbd5a765817e556ac2], clang version 10.0.0
58 oraclelinux:6 : Ok gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23.0.1)
59 oraclelinux:7 : Ok gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-39.0.3)
60 oraclelinux:8 : Ok gcc (GCC) 8.3.1 20191121 (Red Hat 8.3.1-5.0.3), clang version 9.0.1 (Red Hat 9.0.1-2.0.1.module+el8.2.0+5599+9ed9ef6d)
61 ubuntu:12.04 : Ok gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3, Ubuntu clang version 3.0-6ubuntu3 (tags/RELEASE_30/final) (based on LLVM 3.0)
62 ubuntu:14.04 : Ok gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
63 ubuntu:16.04 : Ok gcc (Ubuntu 5.4.0-6ubuntu1~16.04.12) 5.4.0 20160609, clang version 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
64 ubuntu:16.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
65 ubuntu:16.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
66 ubuntu:16.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
67 ubuntu:16.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
68 ubuntu:16.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
69 ubuntu:16.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 5.4.0-6ubuntu1~16.04.9) 5.4.0 20160609
70 ubuntu:18.04 : Ok gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0, clang version 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
71 ubuntu:18.04-x-arm : Ok arm-linux-gnueabihf-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
72 ubuntu:18.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04) 7.5.0
73 ubuntu:18.04-x-m68k : Ok m68k-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
74 ubuntu:18.04-x-powerpc : Ok powerpc-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
75 ubuntu:18.04-x-powerpc64 : Ok powerpc64-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
76 ubuntu:18.04-x-powerpc64el : Ok powerpc64le-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
77 ubuntu:18.04-x-riscv64 : Ok riscv64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
78 ubuntu:18.04-x-s390 : Ok s390x-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
79 ubuntu:18.04-x-sh4 : Ok sh4-linux-gnu-gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0
80 ubuntu:18.04-x-sparc64 : Ok sparc64-linux-gnu-gcc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0
81 ubuntu:18.10 : Ok gcc (Ubuntu 8.3.0-6ubuntu1~18.10.1) 8.3.0, clang version 7.0.0-3 (tags/RELEASE_700/final)
82 ubuntu:19.04 : Ok gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0, clang version 8.0.0-3 (tags/RELEASE_800/final)
83 ubuntu:19.04-x-alpha : Ok alpha-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
84 ubuntu:19.04-x-arm64 : Ok aarch64-linux-gnu-gcc (Ubuntu/Linaro 8.3.0-6ubuntu1) 8.3.0
85 ubuntu:19.04-x-hppa : Ok hppa-linux-gnu-gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
86 ubuntu:19.10 : FAIL gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008, clang version 9.0.0-2 (tags/RELEASE_900/final)
87 ubuntu:20.04 : Ok gcc (Ubuntu 9.3.0-10ubuntu2) 9.3.0, clang version 10.0.0-4ubuntu1
#
It builds ok with the default set of options.
The "7: Simple expression parser" entry is failing due to a bug in the
hashmap in libbpf that will hit upstream via the bpf tree.
# uname -a
Linux five 5.5.17-200.fc31.x86_64 #1 SMP Mon Apr 13 15:29:42 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux
# git log --oneline -1
3e9b26dc22 perf tools: Remove some duplicated includes
# perf version --build-options
perf version 5.7.rc7.g0affd0e5262b
dwarf: [ on ] # HAVE_DWARF_SUPPORT
dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
glibc: [ on ] # HAVE_GLIBC_SUPPORT
gtk2: [ on ] # HAVE_GTK2_SUPPORT
syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
lzma: [ on ] # HAVE_LZMA_SUPPORT
get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
aio: [ on ] # HAVE_AIO_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Test data source output : Ok
6: Parse event definition strings : Ok
7: Simple expression parser : FAILED!
8: PERF_RECORD_* events & perf_sample fields : Ok
9: Parse perf pmu format : Ok
10: PMU events :
10.1: PMU event table sanity : Ok
10.2: PMU event map aliases : Ok
10.3: Parsing of PMU event table metrics : Ok
11: DSO data read : Ok
12: DSO data cache : Ok
13: DSO data reopen : Ok
14: Roundtrip evsel->name : Ok
15: Parse sched tracepoints fields : Ok
16: syscalls:sys_enter_openat event fields : Ok
17: Setup struct perf_event_attr : Ok
18: Match and link multiple hists : Ok
19: 'import perf' in python : Ok
20: Breakpoint overflow signal handler : Ok
21: Breakpoint overflow sampling : Ok
22: Breakpoint accounting : Ok
23: Watchpoint :
23.1: Read Only Watchpoint : Skip
23.2: Write Only Watchpoint : Ok
23.3: Read / Write Watchpoint : Ok
23.4: Modify Watchpoint : Ok
24: Number of exit events of a simple workload : Ok
25: Software clock events period values : Ok
26: Object code reading : Ok
27: Sample parsing : Ok
28: Use a dummy software event to keep tracking : Ok
29: Parse with no sample_id_all bit set : Ok
30: Filter hist entries : Ok
31: Lookup mmap thread : Ok
32: Share thread maps : Ok
33: Sort output of hist entries : Ok
34: Cumulate child hist entries : Ok
35: Track with sched_switch : Ok
36: Filter fds with revents mask in a fdarray : Ok
37: Add fd to a fdarray, making it autogrow : Ok
38: kmod_path__parse : Ok
39: Thread map : Ok
40: LLVM search and compile :
40.1: Basic BPF llvm compile : Ok
40.2: kbuild searching : Ok
40.3: Compile source for BPF prologue generation : Ok
40.4: Compile source for BPF relocation : Ok
41: Session topology : Ok
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Ok
43: Synthesize thread map : Ok
44: Remove thread map : Ok
45: Synthesize cpu map : Ok
46: Synthesize stat config : Ok
47: Synthesize stat : Ok
48: Synthesize stat round : Ok
49: Synthesize attr update : Ok
50: Event times : Ok
51: Read backward ring buffer : Ok
52: Print cpu map : Ok
53: Merge cpu map : Ok
54: Probe SDT events : Ok
55: is_printable_array : Ok
56: Print bitmap : Ok
57: perf hooks : Ok
58: builtin clang support : Skip (not compiled in)
59: unit_number__scnprintf : Ok
60: mem2node : Ok
61: time utils : Ok
62: Test jit_write_elf : Ok
63: Test libpfm4 support : Skip (not compiled in)
64: Test api io : Ok
65: maps__merge_in : Ok
66: Demangle Java : Ok
67: x86 rdpmc : Ok
68: Convert perf time to TSC : Ok
69: DWARF unwind : Ok
70: x86 instruction decoder - new instructions : Ok
71: Intel PT packet decoder : Ok
72: x86 bp modify : Ok
73: probe libc's inet_pton & backtrace it with ping : Ok
74: Use vfs_getname probe to get syscall args filenames : Ok
75: Check open filename arg using perf trace + vfs_getname: Ok
76: Zstd perf.data compression/decompression : Ok
77: Add vfs_getname probe to get syscall args filenames : Ok
#
[acme@five perf]$ git log --oneline -1 ; time make -C tools/perf build-test
3e9b26dc22 (HEAD -> perf/core, seventh/perf/core, quaco/perf/core) perf tools: Remove some duplicated includes
make: Entering directory '/home/acme/git/perf/tools/perf'
- tarpkg: ./tests/perf-targz-src-pkg .
make_no_libbpf_DEBUG_O: make NO_LIBBPF=1 DEBUG=1
make_with_clangllvm_O: make LIBCLANGLLVM=1
make_no_auxtrace_O: make NO_AUXTRACE=1
make_no_demangle_O: make NO_DEMANGLE=1
make_clean_all_O: make clean all
make_util_pmu_bison_o_O: make util/pmu-bison.o
make_no_newt_O: make NO_NEWT=1
make_no_gtk2_O: make NO_GTK2=1
make_no_libbpf_O: make NO_LIBBPF=1
make_no_libaudit_O: make NO_LIBAUDIT=1
make_perf_o_O: make perf.o
make_no_libelf_O: make NO_LIBELF=1
make_static_O: make LDFLAGS=-static NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 NO_JVMTI=1
make_install_O: make install
make_no_libpython_O: make NO_LIBPYTHON=1
make_no_libunwind_O: make NO_LIBUNWIND=1
make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
make_with_libpfm4_O: make LIBPFM4=1
make_pure_O: make
make_doc_O: make doc
make_no_sdt_O: make NO_SDT=1
make_no_slang_O: make NO_SLANG=1
make_no_syscall_tbl_O: make NO_SYSCALL_TABLE=1
make_install_bin_O: make install-bin
make_no_libperl_O: make NO_LIBPERL=1
make_install_prefix_slash_O: make install prefix=/tmp/krava/
make_install_prefix_O: make install prefix=/tmp/krava
make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
make_no_libnuma_O: make NO_LIBNUMA=1
make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1 NO_LIBZSTD=1 NO_LIBCAP=1 NO_SYSCALL_TABLE=1
make_with_babeltrace_O: make LIBBABELTRACE=1
make_help_O: make help
make_no_libcrypto_O: make NO_LIBCRYPTO=1
make_debug_O: make DEBUG=1
make_no_libbionic_O: make NO_LIBBIONIC=1
make_no_backtrace_O: make NO_BACKTRACE=1
make_tags_O: make tags
make_util_map_o_O: make util/map.o
OK
make: Leaving directory '/home/acme/git/perf/tools/perf'
[acme@five perf]$
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXtaWmgAKCRCyPKLppCJ+
J4mdAQD9wzSFCI96jZkWvCx61AkoZkcG8fyaWBpH+7Wuum3J1QD/Q9c37NGepK3T
/sMFKufuBF7Z0Uy2toMz9i9P/KLaEQI=
=dNn2
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling updates from Arnaldo Carvalho de Melo:
"These are additional changes to the perf tools, on top of what Ingo
already submitted.
- Further Intel PT call-trace fixes
- Improve SELinux docs and tool warnings
- Fix race at exit in 'perf record' using eventfd.
- Add missing build tests to the default set of 'make -C tools/perf
build-test'
- Sync msr-index.h getting new AMD MSRs to decode and filter in 'perf
trace'.
- Fix fallback to libaudit in 'perf trace' for arches not using
per-arch *.tbl files.
- Fixes for 'perf ftrace'.
- Fixes and improvements for the 'perf stat' metrics.
- Use dummy event to get PERF_RECORD_{FORK,MMAP,etc} while
synthesizing those metadata events for pre-existing threads.
- Fix leaks detected using clang tooling.
- Improvements to PMU event metric testing.
- Report summary for 'perf stat' interval mode at the end, summing up
all the intervals.
- Improve pipe mode, i.e. this now works as expected, continuously
dumping samples:
# perf record -g -e raw_syscalls:sys_enter | perf --no-pager script
- Fixes for event grouping, detecting incompatible groups such as:
# perf stat -e '{cycles,power/energy-cores/}' -v
WARNING: group events cpu maps do not match, disabling group:
anon group { power/energy-cores/, cycles }
power/energy-cores/: 0
cycles: 0-7
- Fixes for 'perf probe': blacklist address checking, number of
kretprobe instances, etc.
- JIT processing improvements and fixes plus the addition of a 'perf
test' entry for the java demangler.
- Add support for synthesizing first/last level cache, TLB and remove
access events from HW tracing in the auxtrace code, first to use is
ARM SPE.
- Vendor events updates and fixes, including for POWER9 and Intel.
- Allow using ~/.perfconfig for removing the ',' separators in 'perf
stat' output.
- Opt-in support for libpfm4"
* tag 'perf-tools-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (120 commits)
perf tools: Remove some duplicated includes
perf symbols: Fix kernel maps for kcore and eBPF
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf stat: Ensure group is defined on top of the same cpu mask
perf libdw: Fix off-by 1 relative directory includes
perf arm-spe: Support synthetic events
perf auxtrace: Add four itrace options
perf tools: Move arm-spe-pkt-decoder.h/c to the new dir
perf test: Initialize memory in dwarf-unwind
perf tests: Don't tail call optimize in unwind test
tools compiler.h: Add attribute to disable tail calls
perf build: Add a LIBPFM4=1 build test entry
perf tools: Add optional support for libpfm4
perf tools: Correct license on jsmn JSON parser
perf jit: Fix inaccurate DWARF line table
perf jvmti: Remove redundant jitdump line table entries
perf build: Add NO_SDT=1 to the default set of build tests
perf build: Add NO_LIBCRYPTO=1 to the default set of build tests
perf build: Add NO_SYSCALL_TABLE=1 to the build tests
perf build: Remove libaudit from the default feature checks
...
Adjust the fileserver rotation algorithm so that if we've tried all the
addresses on a server (cumulatively over multiple operations) until we've
run out of untried addresses, immediately reprobe all that server's
interfaces and retry the op at least once before we move onto the next
server.
Signed-off-by: David Howells <dhowells@redhat.com>
Display more information about the state of a server record, including the
flags, rtt and break counter plus the probe state for each server in
/proc/net/afs/servers.
Rearrange the server flags a bit to make them easier to read at a glance in
the proc file.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't use the running state for fileserver probes to make decisions about
which server to use as the state is cleared at the start of a probe and
also intermediate values might be misleading.
Instead, add a separate 'latest known' rtt in the afs_server struct and a
flag to indicate if the server is known to be responding and update these
as and when we know what to change them to.
Signed-off-by: David Howells <dhowells@redhat.com>
Fix afs_statfs() so that the value for f_bavail and f_bfree don't go
"negative" if the number of blocks in use by a volume exceeds the max quota
for that volume.
Signed-off-by: David Howells <dhowells@redhat.com>
Whilst it shouldn't happen, it is possible for multiple fileservers to
share a UUID, particularly if an entire cell has been duplicated, UUIDs and
all. In such a case, it's not necessarily possible to map the effect of
the CB.InitCallBackState3 incoming RPC to a specific server unambiguously
by UUID and thus to a specific cell.
Indeed, there's a problem whereby multiple server records may need to
occupy the same spot in the rb_tree rooted in the afs_net struct.
Fix this by allowing servers to form a list, with the head of the list in
the tree. When the front entry in the list is removed, the second in the
list just replaces it. afs_init_callback_state() then just goes down the
line, poking each server in the list.
This means that some servers will be unnecessarily poked, unfortunately.
An alternative would be to route by call parameters.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reorganise afs_volume objects such that they're in a tree keyed on volume
ID, rooted at on an afs_cell object rather than being in multiple trees,
each of which is rooted on an afs_server object.
afs_server structs become per-cell and acquire a pointer to the cell.
The process of breaking a callback then starts with finding the server by
its network address, following that to the cell and then looking up each
volume ID in the volume tree.
This is simpler than the afs_vol_interest/afs_cb_interest N:M mapping web
and allows those structs and the code for maintaining them to be simplified
or removed.
It does make a couple of things a bit more tricky, though:
(1) Operations now start with a volume, not a server, so there can be more
than one answer as to whether or not the server we'll end up using
supports the FS.InlineBulkStatus RPC.
(2) CB RPC operations that specify the server UUID. There's still a tree
of servers by UUID on the afs_net struct, but the UUIDs in it aren't
guaranteed unique.
Signed-off-by: David Howells <dhowells@redhat.com>
YFS Volume Location servers have an operation by which the cell name may be
queried. Use this to find out what a YFS server thinks the canonical cell
name should be.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement the second phase of cell alias detection. This part handles
alias detection for cells that don't have root.cell volumes and so we have
to find some other volume or fileserver to query.
We take the first volume from each such cell and attempt to look it up in
the new cell. If found, we compare the records, if they are the same, we
judge the cell names to be aliases.
Signed-off-by: David Howells <dhowells@redhat.com>
Put in the first phase of cell alias detection. This part handles alias
detection for cells that have root.cell volumes (which is expected to be
likely).
When a cell becomes newly active, it is probed for its root.cell volume,
and if it has one, this volume is compared against other root.cell volumes
to find out if the list of fileserver UUIDs have any in common - and if
that's the case, do the address lists of those fileservers have any
addresses in common. If they do, the new cell is adjudged to be an alias
of the old cell and the old cell is used instead.
Comparing is aided by the server list in struct afs_server_list being
sorted in UUID order and the addresses in the fileserver address lists
being sorted in address order.
The cell then retains the afs_volume object for the root.cell volume, even
if it's not mounted for future alias checking.
This necessary because:
(1) Whilst fileservers have UUIDs that are meant to be globally unique, in
practice they are not because cells get cloned without changing the
UUIDs - so afs_server records need to be per cell.
(2) Sometimes the DNS is used to make cell aliases - but if we don't know
they're the same, we may end up with multiple superblocks and multiple
afs_server records for the same thing, impairing our ability to
deliver callback notifications of third party changes
(3) The fileserver RPC API doesn't contain the cell name, so it can't tell
us which cell it's notifying and can't see that a change made to to
one cell should notify the same client that's also accessed as the
other cell.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Implement client support for the YFSVL.GetCellName RPC operation by which
YFS permits the canonical cell name to be queried from a VL server.
Signed-off-by: David Howells <dhowells@redhat.com>
Save more bits from the volume location database record obtained for a
server so that we can use this information in cell alias detection.
Signed-off-by: David Howells <dhowells@redhat.com>
The AFS filesystem driver is handling the CB.ProbeUuid request incorrectly.
The UUID presented in the request is that of the cache manager, not the
fileserver, so afs_deliver_cb_probe_uuid() shouldn't be using that UUID to
look up the server.
Fix this by looking up the server by address instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't get the epoch from a server, particularly one that we're looking up
by UUID, as UUIDs may be ambiguous and may map to more than one server - so
we can't draw any conclusions from it.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Turn the afs_operation struct into the main way that most fileserver
operations are managed. Various things are added to the struct, including
the following:
(1) All the parameters and results of the relevant operations are moved
into it, removing corresponding fields from the afs_call struct.
afs_call gets a pointer to the op.
(2) The target volume is made the main focus of the operation, rather than
the target vnode(s), and a bunch of op->vnode->volume are made
op->volume instead.
(3) Two vnode records are defined (op->file[]) for the vnode(s) involved
in most operations. The vnode record (struct afs_vnode_param)
contains:
- The vnode pointer.
- The fid of the vnode to be included in the parameters or that was
returned in the reply (eg. FS.MakeDir).
- The status and callback information that may be returned in the
reply about the vnode.
- Callback break and data version tracking for detecting
simultaneous third-parth changes.
(4) Pointers to dentries to be updated with new inodes.
(5) An operations table pointer. The table includes pointers to functions
for issuing AFS and YFS-variant RPCs, handling the success and abort
of an operation and handling post-I/O-lock local editing of a
directory.
To make this work, the following function restructuring is made:
(A) The rotation loop that issues calls to fileservers that can be found
in each function that wants to issue an RPC (such as afs_mkdir()) is
extracted out into common code, in a new file called fs_operation.c.
(B) The rotation loops, such as the one in afs_mkdir(), are replaced with
a much smaller piece of code that allocates an operation, sets the
parameters and then calls out to the common code to do the actual
work.
(C) The code for handling the success and failure of an operation are
moved into operation functions (as (5) above) and these are called
from the core code at appropriate times.
(D) The pseudo inode getting stuff used by the dynamic root code is moved
over into dynroot.c.
(E) struct afs_iget_data is absorbed into the operation struct and
afs_iget() expects to be given an op pointer and a vnode record.
(F) Point (E) doesn't work for the root dir of a volume, but we know the
FID in advance (it's always vnode 1, unique 1), so a separate inode
getter, afs_root_iget(), is provided to special-case that.
(G) The inode status init/update functions now also take an op and a vnode
record.
(H) The RPC marshalling functions now, for the most part, just take an
afs_operation struct as their only argument. All the data they need
is held there. The result delivery functions write their answers
there as well.
(I) The call is attached to the operation and then the operation core does
the waiting.
And then the new operation code is, for the moment, made to just initialise
the operation, get the appropriate vnode I/O locks and do the same rotation
loop as before.
This lays the foundation for the following changes in the future:
(*) Overhauling the rotation (again).
(*) Support for asynchronous I/O, where the fileserver rotation must be
done asynchronously also.
Signed-off-by: David Howells <dhowells@redhat.com>
Add driver for the Socionext UniPhier Pro5 SoC endpoint controller.
This controller is based on the DesignWare PCIe core.
And add "host" to existing controller descriontions for the host controller
in Kconfig.
Link: https://lore.kernel.org/r/1589457801-12796-3-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
We were not checking to see if ioctl requests asked for more than
64K (ie when CIFSMaxBufSize was > 64K) so when setting larger
CIFSMaxBufSize then ioctls would fail with invalid parameter errors.
When requests ask for more than 64K in MaxOutputResponse then we
need to ask for more than 1 credit.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
When "multichannel" is specified on mount, make sure to default to
at least two channels.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The atomisp_mrfld_power() function isn't actually ever called, because
the two call-sites have commented out the use because it breaks on some
platforms. That results in:
drivers/staging/media/atomisp/pci/atomisp_v4l2.c:764:12: warning: ‘atomisp_mrfld_power’ defined but not used [-Wunused-function]
764 | static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable)
| ^~~~~~~~~~~~~~~~~~~
during the build.
Rather than commenting out the use entirely, just disable it
semantically instead (using a "0 &&" construct), leaving the call in
place from a syntax standpoint, and avoiding the warning.
I really don't want my builds to have any warnings that can then hide
real issues.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAl7XUmwACgkQCF8+vY7k
4RU4zg//fT32wiVAPHCCp+pDZVnWNeipXE1gnpqghd/qZXfzBPiLEC9sPS74VVkA
jf1hhR33VZpKAKTPg/b074qhRZBywEOdHZnT/0CEE1oNB61shVOnyDYzLGSq95cO
6V55ovbi5IOkrg0QEJbHpG5YHzt+pq5XeWOkqGNsHwla7N7iMGMVYfHepVVDWPnZ
0wGYFF9cAJP+X/uxqkZLDVMA/K1I+QKh6vrj/qx53/eRt8VID3+i8ig3guk4PlUq
7RLw5w/CywtNaGE5zaz7T3i2eoED71JHOTXi6RxdP1z8IDvELZ9mT95GQ+enlwqt
AS6Ju1sV40wviHMv5prJWQjJkrrtYH3S907lIjwBpQLNGbh2+5crCd/6CwumkGgv
1cCZ1dVmXpCe++9mU9AXmSkjsjGPStNcmHMOpc1Pwn9jUV3LQOOSDp8+RYdt1WHU
Iw9cyM8NOpz5Mv/B1/ZPQ1gPb9lr1gE09XyUekxtAI/nl4nNHGWO8QDuX7Odfrv9
8nfo14lk/p6XCTA8dsWJCgI5B1fgnqD4frHKWO9Uctppc/KBW41c8JpQUjBNlG/T
MhtlGwYMVgSQxpQ6wK018JUAFoWkn1Sr0zMKRayqCnMjMLHsaMwE6kq+LgmRBqbB
ersKV/9ZLYqCU1d6PhEVG6xUs6GsWdLcyhALlmHsddPSdpFXdf8=
=KNAo
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Media documentation is now split into admin-guide, driver-api and
userspace-api books (a longstanding request from Jon);
- The media Kconfig was reorganized, in order to make easier to select
drivers and their dependencies;
- The testing drivers now has a separate directory;
- added a new driver for Rockchip Video Decoder IP;
- The atomisp staging driver was resurrected. It is meant to work with
4 generations of cameras on Atom-based laptops, tablets and cell
phones. So, it seems worth investing time to cleanup this driver and
making it in good shape.
- Added some V4L2 core ancillary routines to help with h264 codecs;
- Added an ov2740 image sensor driver;
- The si2157 gained support for Analog TV, which, in turn, added
support for some cx231xx and cx23885 boards to also support analog
standards;
- Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and
V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera
is located at the device;
- VIDIOC_ENUM_FMT was extended to support MC-centric devices;
- Lots of drivers improvements and cleanups.
* tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits)
media: Documentation: media: Refer to mbus format documentation from CSI-2 docs
media: s5k5baf: Replace zero-length array with flexible-array
media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h>
media: i2c: Add ov2740 image sensor driver
media: ov8856: Implement sensor module revision identification
media: ov8856: Add devicetree support
media: dt-bindings: ov8856: Document YAML bindings
media: dvb-usb: Add Cinergy S2 PCIe Dual Port support
media: dvbdev: Fix tuner->demod media controller link
media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging
media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property
media: atomisp: unify the version for isp2401 a0 and b0 versions
media: atomisp: update TODO with the current data
media: atomisp: adjust some code at sh_css that could be broken
media: atomisp: don't produce errs for ignored IRQs
media: atomisp: print IRQ when debugging
media: atomisp: isp_mmu: don't use kmem_cache
media: atomisp: add a notice about possible leak resources
media: atomisp: disable the dynamic and reserved pools
media: atomisp: turn on camera before setting it
...
Merge more updates from Andrew Morton:
"More mm/ work, plenty more to come
Subsystems affected by this patch series: slub, memcg, gup, kasan,
pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs,
thp, mmap, kconfig"
* akpm: (131 commits)
arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined
riscv: support DEBUG_WX
mm: add DEBUG_WX support
drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup
mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid()
powerpc/mm: drop platform defined pmd_mknotpresent()
mm: thp: don't need to drain lru cache when splitting and mlocking THP
hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs
sparc32: register memory occupied by kernel as memblock.memory
include/linux/memblock.h: fix minor typo and unclear comment
mm, mempolicy: fix up gup usage in lookup_node
tools/vm/page_owner_sort.c: filter out unneeded line
mm: swap: memcg: fix memcg stats for huge pages
mm: swap: fix vmstats for huge pages
mm: vmscan: limit the range of LRU type balancing
mm: vmscan: reclaim writepage is IO cost
mm: vmscan: determine anon/file pressure balance at the reclaim root
mm: balance LRU lists based on relative thrashing
mm: only count actual rotations as LRU reclaim cost
...
ext4_writepages() currently works in a loop like:
start a transaction
scan inode for pages to write
map and submit these pages
stop the transaction
This loop results in starting transaction once more than is needed
because in the last iteration we start a transaction only to scan the
inode and find there are no pages to write. This can be significant
increase in number of transaction starts for single-extent files or
files that have all blocks already mapped. Furthermore we already know
from previous iteration whether there are more pages to write or not. So
propagate the information from mpage_prepare_extent_to_map() and avoid
unnecessary looping in case there are no more pages to write.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200525081215.29451-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Running with some debug patches to detect illegal blocking triggered the
extend/unaligned condition in ext4. If ext4 needs to extend the file (and
hence go to buffered IO), or if the app is doing unaligned IO, then ext4
asks the iomap code to wait for IO completion. If the caller asked for
no-wait semantics by setting IOCB_NOWAIT, then ext4 should return -EAGAIN
instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/76152096-2bbb-7682-8fce-4cb498bcd909@kernel.dk
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
access_ok just checks we are fed a proper user pointer. We also do that
in copy_to_user itself, so no need to do this early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200523073016.2944131-10-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
access_ok just checks we are fed a proper user pointer. We also do that
in copy_to_user itself, so no need to do this early.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-9-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace fiemap_check_flags with a fiemap_prep helper that also takes the
inode and mapped range, and performs the sanity check and truncation
previously done in fiemap_check_range. This way the validation is inside
the file system itself and thus properly works for the stacked overlayfs
case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-7-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Bjorn Helgaas
Linus Torvalds
David Howells
Kunihiko Hayashi
Steve French
Jan Kara
Jens Axboe
Christoph Hellwig