For that, create a 32 bits version of patch_imm64_load_insns()
and create a patch_imm_load_insns() which calls
patch_imm32_load_insns() on PPC32 and patch_imm64_load_insns()
on PPC64.
Adapt optprobes_head.S for PPC32. Use PPC_LL/PPC_STL macros instead
of raw ld/std, opt out things linked to paca and use stmw/lmw to
save/restore registers.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bad58c66859b2a475c0ad516b53164ae3b4853cd.1618927318.git.christophe.leroy@csgroup.eu
For powerpc64, redefine the ppc_inst type so both word and prefixed
instructions can be represented. On powerpc32 the type will remain the
same. Update places which had assumed instructions to be 4 bytes long.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
[mpe: Rework the get_user_inst() macros to be parameterised, and don't
assign to the dest if an error occurred. Use CONFIG_PPC64 not
__powerpc64__ in a few places. Address other comments from
Christophe. Fix some sparse complaints.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200506034050.24806-24-jniethe5@gmail.com
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the paca->soft_enabled to paca->irq_soft_mask as it is no
longer used as a flag for interrupt state, but a mask.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We don't save/restore these across a trap, or with KPROBES_ON_FTRACE.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Optprobes on powerpc are limited to kernel text area. We decided to also
optimize kretprobe_trampoline since that is also in kernel text area.
However,we failed to take into consideration the fact that the same
trampoline is also used to catch function returns from kernel modules.
As an example:
$ sudo modprobe kobject-example
$ sudo bash -c "echo 'r foo_show+8' > /sys/kernel/debug/tracing/kprobe_events"
$ sudo bash -c "echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable"
$ sudo cat /sys/kernel/debug/kprobes/list
c000000000041350 k kretprobe_trampoline+0x0 [OPTIMIZED]
d000000000e00200 r foo_show+0x8 kobject_example
$ cat /sys/kernel/kobject_example/foo
Segmentation fault
With the below (trimmed) splat in dmesg:
Unable to handle kernel paging request for data at address 0xfec40000
Faulting instruction address: 0xc000000000041540
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c000000000041540] optimized_callback+0x70/0xe0
LR [c000000000041e60] optinsn_slot+0xf8/0x10000
Call Trace:
[c0000000c7327850] [c000000000289af4] alloc_set_pte+0x1c4/0x860 (unreliable)
[c0000000c7327890] [c000000000041e60] optinsn_slot+0xf8/0x10000
--- interrupt: 700 at 0xc0000000c7327a80
LR = kretprobe_trampoline+0x0/0x10
[c0000000c7327ba0] [c0000000003a30d4] sysfs_kf_seq_show+0x104/0x1d0
[c0000000c7327bf0] [c0000000003a0bb4] kernfs_seq_show+0x44/0x60
[c0000000c7327c10] [c000000000330578] seq_read+0xf8/0x560
[c0000000c7327cb0] [c0000000003a1e64] kernfs_fop_read+0x194/0x260
[c0000000c7327d00] [c0000000002f9954] __vfs_read+0x44/0x1a0
[c0000000c7327d90] [c0000000002fb4cc] vfs_read+0xbc/0x1b0
[c0000000c7327de0] [c0000000002fd138] SyS_read+0x68/0x110
[c0000000c7327e30] [c00000000000b8e0] system_call+0x38/0xfc
Fix this by loading up the kernel TOC before calling into the kernel.
The original TOC gets restored as part of the usual pt_regs restore.
Fixes: 762df10bad ("powerpc/kprobes: Optimize kprobe in kretprobe_trampoline()")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Current infrastructure of kprobe uses the unconditional trap instruction
to probe a running kernel. Optprobe allows kprobe to replace the trap
with a branch instruction to a detour buffer. Detour buffer contains
instructions to create an in memory pt_regs. Detour buffer also has a
call to optimized_callback() which in turn call the pre_handler(). After
the execution of the pre-handler, a call is made for instruction
emulation. The NIP is determined in advanced through dummy instruction
emulation and a branch instruction is created to the NIP at the end of
the trampoline.
To address the limitation of branch instruction in POWER architecture,
detour buffer slot is allocated from a reserved area. For the time
being, 64KB is reserved in memory for this purpose.
Instructions which can be emulated using analyse_instr() are the
candidates for optimization. Before optimization ensure that the address
range between the detour buffer allocated and the instruction being
probed is within +/- 32MB.
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Christophe Leroy
Jordan Niethe
Thomas Gleixner
Madhavan Srinivasan
Naveen N. Rao
Anju T