The ARM allmodconfig build broke with the addition of the SMD rpmsg
driver that conflicts with the driver its replaces:
WARNING: drivers/soc/qcom/smd: 'qcom_smd_register_edge' exported twice. Previous export was in drivers/rpmsg/qcom_smd.ko
WARNING: drivers/soc/qcom/smd: 'qcom_smd_unregister_edge' exported twice. Previous export was in drivers/rpmsg/qcom_smd.ko
There is already a dependency that is meant to avoid the broken
configuration, but that only prevents the case where at least
one of the two are built-in, but not if both are modules.
This changes the dependency to "=n", to ensure that the new driver
can only be enabled if the other one is completely disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 53e2822e56 ("rpmsg: Introduce Qualcomm SMD backend")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This introduces a new rpmsg backend for the Qualcomm SMD system,
allowing communication with various remote processors found in Qualcomm
platforms. The implementation is based on, and intends to replace,
drivers/soc/qcom/smd.c with the necessary adaptions for fitting with the
rpmsg core.
Based on original work by Sricharan R <sricharan@codeaurora.org>
Cc: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Some rpmsg backends support holding on to and redelivering messages upon
failed handling of them, so provide a way for the callback to report and
error and allow the backends to handle this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move virtio rpmsg implementation details from the public header file to
the virtio rpmsg implementation.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Create a container struct virtio_rpmsg_channel around the rpmsg_channel
to keep virtio backend information separate from the rpmsg and public
API. This makes the public structures independant of virtio.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move the device and endpoint indirection tables to the rpmsg internal
header file, to hide them from the public API.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Extract the generic rpmsg core functionality from the virtio rpmsg
implementation, splitting the implementation in a rpmsg core and a
virtio backend.
Based on initial work by Sricharan R <sricharan@codeaurora.org>
Cc: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The tail of create_channel() is common among all rpmsg backends, so
split it off from the virtio specific part to allow it to be extracted
to the rpmsg core.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Move the rpmsg_send() and rpmsg_destroy_ept() interface to the rpmsg
core, so that we eventually can hide the rpmsg_endpoint ops from the
public API.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add indirection table for rpmsg_endpoint related operations and move
virtio implementation behind this, this finishes of the decoupling of
the virtio implementation from the public API.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Extract the now indirect rpmsg_create_ept() interface to a separate
file and start building up a rpmsg core.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To allow for multiple backend implementations add an indireection table
for rpmsg_device related operations and move the virtio implementation
behind this table.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmsg device representing struct is called rpmsg_channel and the
variable name used throughout is rpdev, with the communication happening
on endpoints it's clearer to just call this a "device" in a public API.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As we introduce support for additional rpmsg backends, some of these
only supports point-to-point "links" represented by a name. By making
rpmsg_create_ept() take a channel_info struct we allow for these
backends to either be passed a source address, a destination address or
a name identifier.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The rpmsg_send() operations has been taking a rpmsg_device, but this
forces users of secondary rpmsg_endpoints to use the rpmsg_sendto()
interface - by extracting source and destination from the given data
structures. If we instead pass the rpmsg_endpoint to these functions a
service can use rpmsg_sendto() to respond to messages, even on secondary
endpoints.
In addition this would allow us to support operations on multiple
channels in future backends that does not support off-channel
operations.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
By basing rpmsg device names on channel id we end up with human readable
device names in sysfs and debug logs.
Reviewed-by: Sarangdhar Joshi <spjoshi@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Make it possible to match rpmsg devices based on device tree node, in
addition to the id table. In some of these cases the rpmsg driver would
not have a id_table, so make this optional.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
There are couple of print_hex_dump traces used in rpmsg code which
prints the actual byte messages being transferred between host and
the remote processors. These traces are quiet verbose and affects
performance, if the appropriate trace level is enabled. These hex
dumps are needed rather rarely, but are quite useful when debugging
complex IPC corner cases. So, this patch switches these hex dump
traces to use the dynamic_hex_dump() API.
The hex dump traces are also enabled only when CONFIG_DYNAMIC_DEBUG
is enabled. This switch allows flexibility of controlling these
traces through dynamic debug, instead of removing them completely.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This patch fixes most of the existing alignment checkpatch check
warnings of the type "Alignment should match open parenthesis"
in the virtio rpmsg bus code. A couple of them have been left as
is to not exceed the 80-char limit.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The dma_addr_t types can be printed properly using the %pad
printk format-specifier, there is no need to resort to the
unsigned long long type-casting to deal with different possible
type sizes.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
These types of error prints are superfluous. The system will
pick up on OOM issues and let the user know. While at this,
fix the usage of using a structure instead of the actual
variable in one of the allocations.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It should never have been there in the first place.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Found with scripts/coccinelle/misc/boolconv.cocci.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add register_rpmsg_driver helper macro that adds THIS_MODULE to
rpmsg_driver for the registering driver. We rename and modify
the existing register_rpmsg_driver to enable this.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
checkpatch.pl wants arrays of strings declared as follows:
static const char * const names[] = { "vq-1", "vq-2", "vq-3" };
Currently the find_vqs() function takes a const char *names[] argument
so passing checkpatch.pl's const char * const names[] results in a
compiler error due to losing the second const.
This patch adjusts the find_vqs() prototype and updates all virtio
transports. This makes it possible for virtio_balloon.c, virtio_input.c,
virtgpu_kms.c, and virtio_rpmsg_bus.c to use the checkpatch.pl-friendly
type.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
virtio spec requires that all drivers set DRIVER_OK
before using devices. While rpmsg isn't yet
included in the virtio 1 spec, previous spec versions
also required this.
virtio rpmsg violates this rule: is calls kick
before setting DRIVER_OK.
The fix isn't trivial since simply calling virtio_device_ready earlier
would mean we might get an interrupt in parallel with adding buffers.
Instead, split kick out to prepare+notify calls. prepare before
virtio_device_ready - when we know we won't get interrupts. notify right
afterwards.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adjust the number of rpmsg buffers to rely on the size of the
vring, instead of using the hard coded value of 512 (256 per
direction).
This is needed when small vrings are being used, where 256
buffers are too much to fit in a vring.
While considering the vring size, keep using the 512 hard coded
value as an upper limit to avoid wacky resource tables consuming
unreasonable amount of memory.
NOTE: The number of buffers is already assumed to be symmetrical
in each direction, and that logic is unchanged.
Signed-off-by: Suman Anna <s-anna@ti.com>
[edit commit message, small code and comment simplification]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
- Make rpmsg process all pending messages instead of just
one, from Robert Tivy
- Fix Kconfig dependency on VIRTUALIZATION, from Suman.
Note: this was submitted late during the 3.9 rc cycle and it
seemed appropriate to wait with it for the merge window.
- Belated addition of an rpmsg entry to the MAINTAINERS file.
People seem to look for this.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=dDx5
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg
Pull rpmsg changes from Ohad Ben-Cohen:
"A small pull request consisting of:
- Make rpmsg process all pending messages instead of just one, from
Robert Tivy
- Fix Kconfig dependency on VIRTUALIZATION, from Suman.
Note: this was submitted late during the 3.9 rc cycle and it seemed
appropriate to wait with it for the merge window.
- Belated addition of an rpmsg entry to the MAINTAINERS file. People
seem to look for this"
* tag 'rpmsg-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
rpmsg: fix kconfig dependencies for VIRTIO
MAINTAINERS: add rpmsg entry
rpmsg: process _all_ pending messages in rpmsg_recv_done
I dived into lguest again, reworking the pagetable code so we can move
the switcher page: our fixmaps sometimes take more than 2MB now...
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=1tYL
-----END PGP SIGNATURE-----
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull virtio & lguest updates from Rusty Russell:
"Lots of virtio work which wasn't quite ready for last merge window.
Plus I dived into lguest again, reworking the pagetable code so we can
move the switcher page: our fixmaps sometimes take more than 2MB now..."
Ugh. Annoying conflicts with the tcm_vhost -> vhost_scsi rename.
Hopefully correctly resolved.
* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits)
caif_virtio: Remove bouncing email addresses
lguest: improve code readability in lg_cpu_start.
virtio-net: fill only rx queues which are being used
lguest: map Switcher below fixmap.
lguest: cache last cpu we ran on.
lguest: map Switcher text whenever we allocate a new pagetable.
lguest: don't share Switcher PTE pages between guests.
lguest: expost switcher_pages array (as lg_switcher_pages).
lguest: extract shadow PTE walking / allocating.
lguest: make check_gpte et. al return bool.
lguest: assume Switcher text is a single page.
lguest: rename switcher_page to switcher_pages.
lguest: remove RESERVE_MEM constant.
lguest: check vaddr not pgd for Switcher protection.
lguest: prepare to make SWITCHER_ADDR a variable.
virtio: console: replace EMFILE with EBUSY for already-open port
virtio-scsi: reset virtqueue affinity when doing cpu hotplug
virtio-scsi: introduce multiqueue support
virtio-scsi: push vq lock/unlock into virtscsi_vq_done
virtio-scsi: pass struct virtio_scsi to virtqueue completion function
...
Return a negative error code from the error handling case instead of 0, as
returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change virtqueue callback function rpmsg_recv_done() to process all
available messages instead of just one message.
Signed-off-by: Robert Tivy <rtivy@ti.com>
[split _recv function instead of adding indentation]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
We never add buffers with input and output parts, so use the new accessors.
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Convert to the much saner new idr interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
idr_destroy() can destroy idr by itself and idr_remove_all() is being
deprecated. Drop its usage.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull trivial tree from Jiri Kosina:
"Assorted tiny fixes queued in trivial tree"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits)
DocBook: update EXPORT_SYMBOL entry to point at export.h
Documentation: update top level 00-INDEX file with new additions
ARM: at91/ide: remove unsused at91-ide Kconfig entry
percpu_counter.h: comment code for better readability
x86, efi: fix comment typo in head_32.S
IB: cxgb3: delay freeing mem untill entirely done with it
net: mvneta: remove unneeded version.h include
time: x86: report_lost_ticks doesn't exist any more
pcmcia: avoid static analysis complaint about use-after-free
fs/jfs: Fix typo in comment : 'how may' -> 'how many'
of: add missing documentation for of_platform_populate()
btrfs: remove unnecessary cur_trans set before goto loop in join_transaction
sound: soc: Fix typo in sound/codecs
treewide: Fix typo in various drivers
btrfs: fix comment typos
Update ibmvscsi module name in Kconfig.
powerpc: fix typo (utilties -> utilities)
of: fix spelling mistake in comment
h8300: Fix home page URL in h8300/README
xtensa: Fix home page URL in Kconfig
...
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a
while now and is almost always enabled by default. As agreed during the
Linux kernel summit, remove it from any "depends on" lines in Kconfigs.
CC: Ohad Ben-Cohen <ohad@wizery.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
CONFIG_HOTPLUG is going away as an option. As a result, the __dev*
markings need to be removed.
This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.
Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull virtio changes from Rusty Russell:
"New workflow: same git trees pulled by linux-next get sent straight to
Linus. Git is awkward at shuffling patches compared with quilt or mq,
but that doesn't happen often once things get into my -next branch."
* 'virtio-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (24 commits)
lguest: fix occasional crash in example launcher.
virtio-blk: Disable callback in virtblk_done()
virtio_mmio: Don't attempt to create empty virtqueues
virtio_mmio: fix off by one error allocating queue
drivers/virtio/virtio_pci.c: fix error return code
virtio: don't crash when device is buggy
virtio: remove CONFIG_VIRTIO_RING
virtio: add help to CONFIG_VIRTIO option.
virtio: support reserved vqs
virtio: introduce an API to set affinity for a virtqueue
virtio-ring: move queue_index to vring_virtqueue
virtio_balloon: not EXPERIMENTAL any more.
virtio-balloon: dependency fix
virtio-blk: fix NULL checking in virtblk_alloc_req()
virtio-blk: Add REQ_FLUSH and REQ_FUA support to bio path
virtio-blk: Add bio-based IO path for virtio-blk
virtio: console: fix error handling in init() function
tools: Fix pthread flag for Makefile of trace-agent used by virtio-trace
tools: Add guest trace agent as a user tool
virtio/console: Allocate scatterlist according to the current pipe size
...
Everyone who selects VIRTIO is also made to select VIRTIO_RING; just make
them synonymous, since we removed the indirection layer some time ago.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dma_alloc/free_coherent APIs requires the platform specific remoteproc
device as the device parameter. We are passing vdev->dev.parent to the
dma_free_coherent function which is the generic rproc device and it is
wrong, it has to be vdev->dev.parent->parent instead, same as when we
call dma_alloc_coherent function.
Signed-off-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
- custom binary format support from Sjur Brændeland
- groundwork for recovery and runtime pm support
- some cleanups and API simplifications
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=vBgg
-----END PGP SIGNATURE-----
Merge tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc
Pull remoteproc update from Ohad Ben-Cohen:
- custom binary format support from Sjur Brændeland
- groundwork for recovery and runtime pm support
- some cleanups and API simplifications
Fix up conflicts in drivers/remoteproc/remoteproc_core.c due to clashes
with earlier cleanups by Sjur Brændeland (with part of the cleanups
moved into the new remoteproc_elf_loader.c file).
* tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
MAINTAINERS: add remoteproc's git
remoteproc: Support custom firmware handlers
remoteproc: Move Elf related functions to separate file
remoteproc: Add function rproc_get_boot_addr
remoteproc: Pass struct fw to load_segments and find_rsc_table.
remoteproc: adopt the driver core's alloc/add/del/put naming
remoteproc: remove the get_by_name/put API
remoteproc: support non-iommu carveout assignment
remoteproc: simplify unregister/free interfaces
remoteproc: remove the now-redundant kref
remoteproc: maintain a generic child device for each rproc
remoteproc: allocate vrings on demand, free when not needed
When rpmsg drivers are built into the kernel, they must not initialize
before the rpmsg bus does, otherwise they'd trigger a BUG() in
drivers/base/driver.c line 169 (driver_register()).
To fix that, and to stop depending on arbitrary linkage ordering of
those built-in rpmsg drivers, we make the rpmsg bus initialize at
subsys_initcall.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Federico Fuga <fuga@studiofuga.com>
[ohad: rewrite the commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
For each registered rproc, maintain a generic remoteproc device whose
parent is the low level platform-specific device (commonly a pdev, but
it may certainly be any other type of device too).
With this in hand, the resulting device hierarchy might then look like:
omap-rproc.0
|
- remoteproc0 <---- new !
|
- virtio0
|
- virtio1
|
- rpmsg0
|
- rpmsg1
|
- rpmsg2
Where:
- omap-rproc.0 is the low level device that's bound to the
driver which invokes rproc_register()
- remoteproc0 is the result of this patch, and will be added by the
remoteproc framework when rproc_register() is invoked
- virtio0 and virtio1 are vdevs that are registered by remoteproc
when it realizes that they are supported by the firmware
of the physical remote processor represented by omap-rproc.0
- rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg
channels, and are registerd by the rpmsg bus when it gets notified
about their existence
Technically, this patch:
- changes 'struct rproc' to contain this generic remoteproc.x device
- creates a new "remoteproc" type, to which this new generic remoteproc.x
device belong to.
- adds a super simple enumeration method for the indices of the
remoteproc.x devices
- updates all dev_* messaging to use the generic remoteproc.x device
instead of the low level platform-specific device
- updates all dma_* allocations to use the parent of remoteproc.x (where
the platform-specific memory pools, most commonly CMA, are to be found)
Adding this generic device has several merits:
- we can now add remoteproc runtime PM support simply by hooking onto the
new "remoteproc" type
- all remoteproc log messages will now carry a common name prefix
instead of having a platform-specific one
- having a device as part of the rproc struct makes it possible to simplify
refcounting (see subsequent patch)
Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and
discussing these ideas in one of the remoteproc review threads and
to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out
with the (upcoming) runtime PM support for remoteproc.
Cc: Fernando Guzman Lugo <fernando.lugo@ti.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
When inbound messages arrive, rpmsg core looks up their associated
endpoint (by destination address) and then invokes their callback.
We've made sure that endpoints will never be de-allocated after they
were found by rpmsg core, but we also need to protect against the
(rare) scenario where the rpmsg driver was just removed, and its
callback function isn't available anymore.
This is achieved by introducing a callback mutex, which must be taken
before the callback is invoked, and, obviously, before it is removed.
Cc: stable <stable@vger.kernel.org>
Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
When an inbound message arrives, the rpmsg core looks up its
associated endpoint and invokes the registered callback.
If a message arrives while its endpoint is being removed (because
the rpmsg driver was removed, or a recovery of a remote processor
has kicked in) we must ensure atomicity, i.e.:
- Either the ept is removed before it is found
or
- The ept is found but will not be freed until the callback returns
This is achieved by maintaining a per-ept reference count, which,
when drops to zero, will trigger deallocation of the ept.
With this in hand, it is now forbidden to directly deallocate
epts once they have been added to the endpoints idr.
Cc: stable <stable@vger.kernel.org>
Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Arnd Bergmann
Bjorn Andersson
Anna, Suman
Lee Jones
Andrew F. Davis
Stefan Hajnoczi
Michael S. Tsirkin
Linus Torvalds
Wei Yongjun
Robert Tivy
Rusty Russell
Tejun Heo
Jiri Kosina
Kees Cook
Masanari Iida
Greg Kroah-Hartman
Fernando Guzman Lugo
Federico Fuga
Ohad Ben-Cohen