Граф коммитов

61 Коммитов

Автор SHA1 Сообщение Дата
Wang Nan 87095f7dde tools build: Add feature detection for g++
Check if g++ is available. The result will be used by builtin clang and
LLVM support. Since LLVM requires C++11, this feature detector checks
std::move().

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-05 19:59:35 -03:00
Wang Nan f61bdc3304 tools build: Support compiling C++ source file
Add new rule to compile .cpp file to .o use g++. C++ support is required
for built-in clang and LLVM support.

Linker side support will be introduced by following commits.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1474874832-134786-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-05 19:58:51 -03:00
Jiri Olsa 6b3db6f9b9 tools build: Make fixdep a hostprog
It is used in the build process, so stop suppressing its build in tools
cross builds.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160927141846.GA6589@krava
[ Use HOSTCC on the $(OUTPUT)fixdep target, it was using the x-compiler
  to link fixdep-in.o, that was correctly built with HOSTCC and thus failing ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03 11:40:35 -03:00
Jiri Olsa 0c3b7e4261 tools build: Add support for host programs format
In some cases, like for fixdep and shortly for jevents, we need to build a tool
to run on the host that will be used in building a tool, such as perf, that is
being cross compiled, so do like the kernel and provide HOSTCC, HOSTLD and HOSTAR
to do that.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Andi Kleen <andi@firstfloor.org>
Requested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160927141846.GA6589@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-10-03 11:39:09 -03:00
Masami Hiramatsu e26e63be64 perf build: Add sdt feature detection
This checks whether sys/sdt.h is available or not, which is required for
DTRACE_PROBE().

We can disable this feature by passing NO_SDT=1 when building.

This flag will be used for SDT test case and further SDT events in
perftools.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831795615.17065.17513820540591053933.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-13 23:09:09 -03:00
Arnaldo Carvalho de Melo 1c1a3a4729 perf tools: Add feature detection for gelf_getnote()
That is not present on some libelf implementations, such as the one used
in Alpine Linux: libelf-0.8.13.

This ends up disabling the SDT code, that relies on this function.

One alternative would be to provide an weak fallback implementation or
the open coded variant used by the buildid sysfs notes reading code.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-82lh22ybedy9b9lych8xj12g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-12 15:20:41 -03:00
Arnaldo Carvalho de Melo 2492c465ad perf build: Add feature detection for libelf's elf_getshdrstrndx()
That appeared after 0.140, and will be used in the SDT code, so, to
avoid bisection break on older systems, add a feature detection and
provide a stub with a pr_debug() to keep it building.

Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-80y0eldgweorqnwha9rvfxjr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-04 19:38:59 -03:00
Linus Torvalds 5b26fc8824 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:

 - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and
   unexports symbols which are not used in the current config [Nicolas
   Pitre]

 - several kbuild rule cleanups [Masahiro Yamada]

 - warning option adjustments for gcov etc [Arnd Bergmann]

 - a few more small fixes

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits)
  kbuild: move -Wunused-const-variable to W=1 warning level
  kbuild: fix if_change and friends to consider argument order
  kbuild: fix adjust_autoksyms.sh for modules that need only one symbol
  kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line
  gcov: disable -Wmaybe-uninitialized warning
  gcov: disable tree-loop-im to reduce stack usage
  gcov: disable for COMPILE_TEST
  Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES
  Kbuild: change CC_OPTIMIZE_FOR_SIZE definition
  kbuild: forbid kernel directory to contain spaces and colons
  kbuild: adjust ksym_dep_filter for some cmd_* renames
  kbuild: Fix dependencies for final vmlinux link
  kbuild: better abstract vmlinux sequential prerequisites
  kbuild: fix call to adjust_autoksyms.sh when output directory specified
  kbuild: Get rid of KBUILD_STR
  kbuild: rename cmd_as_s_S to cmd_cpp_s_S
  kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
  kbuild: drop redundant "PHONY += FORCE"
  kbuild: delete unnecessary "@:"
  kbuild: mark help target as PHONY
  ...
2016-05-26 22:01:22 -07:00
He Kuang f9be7eefcc perf build: Add build-test for debug-frame on arm/arm64
Debug-frame for remote platforms is not related to the host platform, so
we should test each platform separately.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462866037-30382-5-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11 12:24:58 -03:00
He Kuang b1d960000c perf build: Add build-test for libunwind cross-platforms support
Currently only test for local libunwind. We should check all supported
platforms so we can use them to parse perf.data with callchain info on
different machines.

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1462866037-30382-4-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11 12:24:58 -03:00
Florian Fainelli 1a71476e4f bpf tools: Fix syscall argument
Coverity flagged this under CID 1354884 as a sizeof mismatch, it turns
out that the argument "attr" passed to syscall should have been a
pointer to attr in the first place.

Reported-by: coverity (CID 1354884)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 8f9e05fb29 ("perf tools: Fix PowerPC native building")
Link: http://lkml.kernel.org/r/1461551694-5512-3-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 09:58:57 -03:00
Florian Fainelli a431d67934 bpf tools: Remove expression with no effect
Assigning "attr" to "attr" does not have any effect, but was caught by
Coverity, so let's remove this.

Reported-by: coverity (CID 1354720)
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Fixes: 1b76c13e4b ("bpf tools: Introduce 'bpf' library and add bpf feature check")
Link: http://lkml.kernel.org/r/1461551694-5512-2-git-send-email-f.fainelli@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-28 09:58:57 -03:00
Masahiro Yamada 23d4384870 kbuild: rename cmd_cc_i_c to cmd_cpp_i_c
This command just preprocesses .c files into .i files, so cmd_cpp_i_c
seems more suitable.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
2016-04-20 10:48:19 +02:00
Arnaldo Carvalho de Melo bd0419e2a5 perf probe: Check if dwarf_getlocations() is available
If not, tell the user that:

  config/Makefile:273: Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157

And return -ENOTSUPP in die_get_var_range(), failing features that
need it, like the one pointed out above.

This fixes the build on older systems, such as Ubuntu 12.04.5.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9l7luqkq4gfnx7vrklkq4obs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-06 10:44:28 -03:00
Masahiro Yamada 676787939e tools build: Use .s extension for preprocessed assembler code
The "man gcc" says .i extension represents the file is C source code
that should not be preprocessed.  Here, .s should be used.

For clarification,
  .c  ---(preprocess)--->  .i
  .S  ---(preprocess)--->  .s

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Lukas Wunner <lukas@wunner.de>
Link: http://lkml.kernel.org/r/1454263140-19670-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-03 11:10:37 -03:00
Stephane Eranian 8ee4646038 perf build: Add libcrypto feature detection
Will be used to generate build-ids in the jitdump code.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Carl Love <cel@us.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John McCutchan <johnmccutchan@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1448874143-7269-3-git-send-email-eranian@google.com
[ tools/perf/Makefile.perf comment about NO_LIBCRYPTO and added it to tests/make ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-05 09:46:45 -03:00
Jiri Olsa 76c4aaec41 perf build: Fix feature-dump checks, we need to test all features
I see problem with test-all case speedup, because it does not
comprise checks for 32bits compilations, fix it.

The problem could be noticed by calling:

  make -C tools/perf feature-dump

That would end up misdetecting the feature-compile-x32, that, building
using 'gcc -mx32' needs stub headers not present in a fedora 23 devel
machine and thus fail to compile, but ended up appearing as detected,
i.e. present in tools/perf/FEATURE-DUMP as 'feature-compile-x32=1'.

With this fix it correctly appears as 'feature-compile-x32=0' and if we
uninstall the libc devel files for 32 bits (glibc-devel.i686), then the
relevant variable is flipped from 'feature-compile-32=1' to
'feature-compile-32=0'.

The same things happened for bionic and libbabeltrace, that were
misdetected because the are no tested in test-all.c

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-u0sjaddf1r9m8icpd98ry7fz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-28 19:04:19 -03:00
Wang Nan cf9162c290 tools build: Check basic headers for test-compile feature checker
An i386 binary can be linked correctly even without correct headers.
Which causes problem. For exmaple:

 $ mv /tmp/oxygen_root/usr/include/gnu/stubs-32.h{,.bak}
 $ make tools/perf
 Auto-detecting system features:
 ...                         dwarf: [ on  ]
 [SNIP]
   GEN      common-cmds.h
   CC       perf-read-vdso32
 In file included from /tmp/oxygen_root/usr/include/features.h:388:0,
                  from /tmp/oxygen_root/usr/include/stdio.h:27,
                  from perf-read-vdso.c:1:
 /tmp/oxygen_root/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
  # include <gnu/stubs-32.h>
                           ^
 compilation terminated.
 ...

In this patch we checks not only compiler and linker, but also basic
headers in test-compile test case, make it fail on a platform
lacking correct headers.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1453893742-20603-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-27 11:59:32 -03:00
Wang Nan 9fd4186ac1 tools build: Allow subprojects select all feature checkers
Put feature checkers not in original FEATURE_TESTS to a new list and
allow subproject select all feature checkers by setting FEATURE_TESTS to
'all'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1453715801-7732-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26 12:12:48 -03:00
Wang Nan 0c4d40d580 tools build: Add BPF feature check to test-all
The test-all.c file doesn't check BPF related features. For an
environment with all other features enabled, BPF would be considered
enabled without doing real feature check.

This patch adds test-bpf.c into test-all.c.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-11-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-11 19:22:21 -03:00
Wang Nan 8f9e05fb29 perf tools: Fix PowerPC native building
Checks BPF syscall number, turn off libbpf building on platform doesn't
correctly support sys_bpf instead of blocking compiling.

Reported-and-Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1452520124-2073-7-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-11 19:22:20 -03:00
Jiri Olsa 936d120d5f tools build feature: Use value assignment form for FEATURE-DUMP file
Changing the contents of the FEATURE-DUMP file, so it looks like:

  feature-backtrace=1
  feature-dwarf=0
  feature-fortify-source=1
  feature-sync-compare-and-swap=0

This way it could get included in sub projects, so they won't be forced
to redo features detection.

Also now storing the complete set of features.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:14 -03:00
Jiri Olsa c6a5f88f33 tools build feature: Introduce feature_assign macro
The feature_assign macro generates feature value
assignment for name, like:

  $(call feature_assign,dwarf) == feature-dwarf=1

This will be used more in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-4-git-send-email-jolsa@kernel.org
[ Rename it to feature_assign, the original shorter name was misleading, to say the least ;-) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:13 -03:00
Jiri Olsa 76ee2ff342 tools build feature: Move dwarf post unwind choice output into perf
We decide what dwarf unwind to choose way after the Makefile.feature
makefile is included. The $(dwarf-post-unwind) is not even set at that
time. For the same reason it was never included in FEATURE-DUMP file.

Moving it into perf VF=1 verbose display.

  $ make VF=1
    BUILD:   Doing 'make -j4' parallel build
  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...
  ...                 LIBUNWIND_DIR:
  ...                     LIBDW_DIR:
  ...     DWARF post unwind library: libunwind
  ...

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:13 -03:00
Jiri Olsa d0018b495c tools build feature: Fix feature_check_display_code typo
This function is cursed.. ;-)

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-06 20:11:13 -03:00
Josh Poimboeuf 1925459b4d tools build: Fix feature Makefile issues with 'O='
When building perf binaries outside the source tree with 'make O=<dir>',
the auto-detected features get re-tested for every build, which is
unnecessary and inconsistent with the behavior seen when building
directly in the source tree.

Another issue is that 'make O=<dir> clean' doesn't remove the feature
files from the object tree.

Fix these problems by looking for the binaries in the $(OUTPUT)
directory.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/113bd01530e9761778c60a75a96c65fc59860f68.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-16 15:31:33 -03:00
Josh Poimboeuf 26bc9b2df1 perf build: Remove unnecessary line in Makefile.feature
This line always silently fails because it doesn't add the 'test-'
prefix to the .bin file.

And it seems to be unnecessary anyway: the line immediately after it
does all the individual feature checks.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/554a05c18af564ba015c9e68f25730126e0f4acb.1449965119.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-14 12:16:15 -03:00
Jiri Olsa 5e50426d5d tools build: Use fixdep with OUTPUT path prefix
Adding OUTPUT path prefix for fixdep target so we use it properly in out
of tree builds.

If the fixdep already existed in the tree, the out of tree build would
see it already exist and did not build the out of tree version, as
reported by Arnaldo:

  [acme@zoo linux]$ make O=/tmp/build/perf -C tools/perf
  make: Entering directory '/home/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
  make[2]: Nothing to be done for 'fixdep'.
  make: Leaving directory '/home/git/linux/tools/perf'

Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151126185055.GC19410@krava.brq.redhat.com
[ Fixed conflict with 5725dd8fa8 ("tools build: Clean CFLAGS and LDFLAGS for fixdep") ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26 16:32:24 -03:00
Wang Nan 5725dd8fa8 tools build: Clean CFLAGS and LDFLAGS for fixdep
Sometimes passing variables to tools/build is dangerous. For example, on
my platform there is a gcc problem (gcc 4.8.1):

It passes the stackprotector-all feature check:

  $ gcc -fstack-protector-all -c ./test.c
  $ echo $?
  0

But requires LDFLAGS support if separate compiling and linking:
  $ gcc -fstack-protector-all -c ./test.c
  $ gcc ./test.o
  ./test.o: In function `main':
  test.c:(.text+0xb): undefined reference to `__stack_chk_guard'
  test.c:(.text+0x21): undefined reference to `__stack_chk_guard'
  collect2: error: ld returned 1 exit status
  $ gcc -fstack-protector-all ./test.o
  $ echo $?
  0
  $ gcc ./test.o -lssp
  $ echo $?
  0
  $

In this environment building perf throws an error:

  $ make
    BUILD:   Doing 'make -j24' parallel build
  config/Makefile:344: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
  config/Makefile:403: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev
  config/Makefile:418: slang not found, disables TUI support. Please install slang-devel or libslang-dev
  config/Makefile:432: GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev
  config/Makefile:564: No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling
  config/Makefile:606: No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev
    CC       fixdep.o
    LD       fixdep-in.o
    LINK     fixdep
  fixdep-in.o: In function `parse_dep_file':
  /kernel/tools/build/fixdep.c:47: undefined reference to `__stack_chk_guard'
  /kernel/tools/build/fixdep.c:117: undefined reference to `__stack_chk_guard'
  fixdep-in.o: In function `main':
  /kernel-hydrogen/tools/build/fixdep.c:156: undefined reference to `__stack_chk_guard'
  /kernel/tools/build/fixdep.c:168: undefined reference to `__stack_chk_guard'
  collect2: error: ld returned 1 exit status
  make[2]: *** [fixdep] Error 1
  make[1]: *** [fixdep] Error 2
  make: *** [all] Error 2

This is because the CFLAGS used in building perf pollutes the CFLAGS
used for fixdep, passing -fstack-protector-all to buiold fixdep which is
obviously not required. Since fixdep is a small host side tool, we
should keep its CFLAGS/LDFLAGS simple and clean.

This patch clears the CFLAGS and LDFLAGS passed when building fixdep, so
such gcc problem won't block the perf build process.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1448372181-151723-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-25 16:36:36 -03:00
Rabin Vincent 3af6ed84eb tools build: Fix libiberty feature detection
Any CFLAGS or LDFLAGS set by the user need to be passed to the feature
build command.  This many include for example -I or -L to point to
libraries and include files in custom paths.

In most of the test-*.bin rules in build/feature/Makefile, we use the BUILD
macro which always sends in CFLAGS and LDFLAGS.  The libiberty build line
however doesn't use the BUILD macro and thus needs to send in CFLAGS and
LDFLAGS explicitly.  Without this, when using custom CFLAGS/LDFLAGS, libiberty
fails to be detected and the perf link fails with something like:

   LINK     perf
  libbfd.a(bfd.o): In function `bfd_errmsg':
  bfd.c:(.text+0x168): undefined reference to `xstrerror'
  bbfd.a(opncls.o): In function `_bfd_new_bfd':
  opncls.c:(.text+0xe8): undefined reference to `objalloc_create'
  ...

Signed-off-by: Rabin Vincent <rabin.vincent@axis.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabinv@axis.com>
Link: http://lkml.kernel.org/r/1446104978-26429-2-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-29 17:46:35 -03:00
Wang Nan ed63f34c02 perf tools: Make perf depend on libbpf
By adding libbpf into perf's Makefile, this patch enables perf to build
libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set.

The newly introduced code is similar to how libapi and libtraceevent
are wired into Makefile.perf.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Append make_no_libbpf to tools/perf/tests/make.

The 'bpf' feature check is appended into default FEATURE_TESTS and
FEATURE_DISPLAY, so perf will check the API version of bpf in
/path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except
when we are trying to port this code to an old kernel.

Error messages are also updated to notify users about the lack of BPF
support in 'perf record' if libelf is missing or the BPF API check
failed.

tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf
files when working on perf using tools/perf/tags.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com
[ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28 12:48:12 -03:00
Yunlong Song e1d040cfcf perf build: Add fixdep to .gitignore
Commit 7c422f5572 ("tools build: Build
fixdep helper from perf and basic libs") dynamically creates fixdep
during the perf building. Add it to .gitignore.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7c422f5572 ("tools build: Build fixdep helper from perf and basic libs")
Link: http://lkml.kernel.org/r/1444899116-8220-1-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-20 10:43:28 -03:00
Jiri Olsa 3a70fcd3a4 tools build: Fix cross compile build
He Kuang the new fixdep tool breaks cross compiling. The reason is it
wouldn't get compiled under host arch, but under cross arch and failed
to run.

We need to add support for host side tools build, meanwhile disabling
fixdep usage for cross arch builds.

Reported-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20151013124358.GB9467@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-13 11:59:43 -03:00
Jiri Olsa 7c422f5572 tools build: Build fixdep helper from perf and basic libs
Adding the fixdep target into the Makefile.include to ease up building of
fixdep helper, that needs to be built before we dive in to the build itself.
The user can invoke the fixdep target to build the helper.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:55 -03:00
Jiri Olsa 9fb81323eb tools build: Make the fixdep helper part of the build process
Making the fixdep helper to be invoked within dep-cmd.

Each user of the build framework needs to make sure fixdep exists before
executing the build itself.

If the build doesn't find fixdep, it falls back to the old style
dependency tracking.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:55 -03:00
Jiri Olsa 275e2d9559 tools build: Move dependency copy into function
So it's easier to add more functionality in the following commit.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:55 -03:00
Jiri Olsa 9f7ef9854e tools build: Add fixdep dependency helper
For dependency tracking we currently use targets that fall out of the
gcc -MD command. We store this info in the .cmd file and include as
makefile during the build.

This format put object as target and all the c and header files as
dependencies, like:

  util/abspath.o: util/abspath.c /usr/include/stdc-predef.h util/cache.h \
   /usr/include/bits/wordsize.h /usr/include/gnu/stubs.h \
   ...

If any of those dependency header files (krava.h below) is removed the
build fails on:

  make[1]: *** No rule to make target 'krava.h', needed by 'inc.o'.  Stop.

This patch adds fixdep helper, that is used by kbuild to alter the shape
of the object dependencies like:

  source_util/abspath.o := util/abspath.c

  deps_util/abspath.o := \
    /usr/include/stdc-predef.h \
    util/cache.h \
    ...

  util/abspath.o: $(deps_util/abspath.o)

  $(deps_util/abspath.o):

With this format the header removal won't make the build fail, because
it'll be picked up by the last empty target defined for each header.

As previously mentioned the fixdep tool is taken from kbuild. It's not
complete backport, only the part that alters the standard dependency
info was taken, the part that adds the CONFIG_* dependency logic will be
probably taken later on.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kai Germaschewski <kai.germaschewski@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:55 -03:00
Jiri Olsa 0c00c3fb4e tools build: Add test for missing include
The current build framework fails to cope with header file removal. The
reason is that the removed header file stays in the .cmd file target
rule and forces the build to fail.

This issue is fixed and explained in the following patches.

Adding a new build test that simulates header removal.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:54 -03:00
Jiri Olsa ab6201d09b tools build: Add Makefile.include
To ease up build framework code setup for users.

More shared code will be added in the following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443004442-32660-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-28 15:50:54 -03:00
Arnaldo Carvalho de Melo 13e96db61c tools build: Allow setting the feature detection user
We will use the tools/build/ autodetection in the eBPF patchkit
and it is currently sharing the output directory with perf, that
also uses the feature detection logic.

As we keep state in the output directory, so that we can avoid running
all the tests again, we need to have different filenames for the files
used in this state, allow doing that via the FEATURE_USER variable, to
be set alongside the existing FEATURE_{TEST,DISPLAY} variables.

v2: Fix comment describing the FEATURE_DUMP filename to make sure where
    it is created, precisely at $(OUTPUT)FEATURE-DUMP$(FEATURE_USER).
    Pointed out by Jiri.

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/n/tip-fdbev0vrn3x6idqc3ajbnvcb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:47:04 -03:00
Arnaldo Carvalho de Melo 6076e2a47c tools build: Fixup feature detection display function name
Cut'n'paste mistake, it should eval the name of the function
defined right next to it, in the next line, fix it.

Before:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ on  ]
  ...                   libelf-mmap: [ on  ]
  ...                           bpf: [ on  ]
  <SNIP>

After:

  $ make -C tools/lib/bpf/
  make: Entering directory '/home/git/linux/tools/lib/bpf'

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...             libelf-getphdrnum: [ OFF ]
  ...                   libelf-mmap: [ OFF ]
  ...                           bpf: [ on  ]
  <SNIP>

Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: pi3orama@163.com
Fixes: 58d4f00ff1 ("perf build: Fix feature_check name clash")
Link: http://lkml.kernel.org/n/tip-dzu1c4sruukgfq5d5b1c4r30@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-22 10:44:19 -03:00
Arnaldo Carvalho de Melo b0063dbfb0 tools build: Add test for presence of __get_cpuid() gcc builtin
The auxtrace code needed by Intel PT uses the __get_cpuid() gcc builtin,
that is not present in old systems, breaking the build.

Add a test to check for that builtin and disable AUXTRACE in those
systems.

  [acme@rhel5 linux]$  make NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j2' parallel build

  Auto-detecting system features:
  <SNIP>
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ OFF ]
  <SNIP>
  config/Makefile:630: Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc
    MKDIR    /tmp/build/perf/util/
  <SNIP>

This fixes the build on old systems such as RHEL/CentOS 5.11.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4puslul0jltoodzpx9r4sje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 13:14:35 -03:00
Arnaldo Carvalho de Melo f8ac8606fd tools build: Add test for presence of numa_num_possible_cpus() in libnuma
The existing numa test checks only if numa.h and numa_available() are
present, but that can be satisfied with an old libnuma that is not
enough for the 'perf bench numa' entry, so add a test to check for that:

  [acme@rhel5 linux]$  make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin
  make: Entering directory `/home/acme/git/linux/tools/perf'
    BUILD:   Doing 'make -j2' parallel build

  Auto-detecting system features:
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ on  ]

  <SNIP>
  config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8
    INSTALL  binaries
  <SNIP>

This fixes the build on old systems such as RHEL/CentOS 5.11.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Vinson Lee <vlee@twopensource.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 13:14:35 -03:00
Jiri Olsa 0bdede8a3e tools build: Allow duplicate objects in the object list
It's sometimes useful to specify the object affiliation to multiple
config options like:

  libperf-$(CONFIG_X86) += tsc.o
  libperf-$(CONFIG_AUXTRACE) += tsc.o

while the object itself is linked only once. Adding the support for this
and ignoring duplicate objects in the object list.

Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150826130103.GF22670@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-26 10:34:58 -03:00
Adrian Hunter 237fae79f5 perf tools: Add Intel PT instruction decoder
Add support for decoding instructions for Intel Processor Trace.  The
kernel x86 instruction decoder is copied for this.

This essentially provides intel_pt_get_insn() which takes a binary
buffer, uses the kernel's x86 instruction decoder to get details of the
instruction and then categorizes it for consumption by an Intel PT
decoder.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1439450095-30122-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-17 11:11:36 -03:00
Andi Kleen 7aec51cbf0 perf tools: Support static linking with libdw
The Fedora 22 version of libdw requires a couple of extra libraries to
link. With a dynamic link the dependencies are pulled in automatically,
but this doesn't work for static linking. Add the needed libraries
explicitely to the feature probe and the Makefile.

v2: Explicitly check for static linking and only add the dependencies
    when -static is set. This is to avoid regressions on Arnaldo's system.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1439419717-20601-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-13 14:49:11 -03:00
Wang Nan 1b76c13e4b bpf tools: Introduce 'bpf' library and add bpf feature check
This is the first patch of libbpf. The goal of libbpf is to create a
standard way for accessing eBPF object files. This patch creates
'Makefile' and 'Build' for it, allows 'make' to build libbpf.a and
libbpf.so, 'make install' to put them into proper directories.
Most part of Makefile is borrowed from traceevent.

Before building, it checks the existence of libelf in Makefile, and deny
to build if not found. Instead of throwing an error if libelf not found,
the error raises in a phony target "elfdep". This design is to ensure
'make clean' still workable even if libelf is not found.

Because libbpf requires 'kern_version' field set for 'union bpf_attr'
(bpfdep" is used for that dependency), Kernel BPF API is also checked
by intruducing a new feature check 'bpf' into tools/build/feature,
which checks the existence and version of linux/bpf.h. When building
libbpf, it searches that file from include/uapi/linux in kernel source
tree (controlled by FEATURE_CHECK_CFLAGS-bpf). Since it searches kernel
source tree it reside, installing of newest kernel headers is not
required, except we are trying to port these files to an old kernel.

To avoid checking that file when perf building, the newly introduced
'bpf' feature check doesn't added into FEATURE_TESTS and
FEATURE_DISPLAY by default in tools/build/Makefile.feature, but added
into libbpf's specific.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Bcc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1435716878-189507-4-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-07 10:16:56 -03:00
Petri Gynther f151f53aa4 perf tools: Fix build errors with mipsel-linux-uclibc compiler
linux/tools$ make ARCH=mips CROSS_COMPILE=mipsel-linux- perf
...
config/Makefile:256: *** No gnu/libc-version.h found, please install
glibc-dev[el].  Stop.
make[1]: *** [all] Error 2
make: *** [perf] Error 2

...
In file included from builtin-sched.c:13:0:
util/cloexec.h:8:12: error: redundant redeclaration of ‘sched_getcpu’
 [-Werror=redundant-decls]
 extern int sched_getcpu(void) __THROW;

mipsel-buildroot-linux-uclibc/sysroot/usr/include/bits/sched.h:88:12:
 note: previous declaration of ‘sched_getcpu’ was here
 extern int sched_getcpu (void) __THROW;

uclibc info:
sysroot/usr/include/bits/uClibc_config.h
__UCLIBC_MAJOR__ 0
__UCLIBC_MINOR__ 9
__UCLIBC_SUBLEVEL__ 33

sysroot/usr/include/features.h
__UCLIBC__ 1
__GLIBC__ 2
__GLIBC_MINOR__ 2

Signed-off-by: Petri Gynther <pgynther@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1438735081-24131-1-git-send-email-pgynther@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-05 16:56:16 -03:00
Aaro Koskinen 642273795f perf tools: Create config.detected into OUTPUT directory
Create config.detected into OUTPUT directory instead of source
directory.

This fixes parallel builds that share the same source directory.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1435751683-18500-1-git-send-email-aaro.koskinen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-01 17:53:49 -03:00
Linus Torvalds 6bc4c3ad36 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "These are the left over fixes from the v4.1 cycle"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix build breakage if prefix= is specified
  perf/x86: Honor the architectural performance monitoring version
  perf/x86/intel: Fix PMI handling for Intel PT
  perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
  perf/x86: Add more Broadwell model numbers
  perf: Fix ring_buffer_attach() RCU sync, again
2015-06-22 15:45:41 -07:00