Граф коммитов

988 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 10dc374766 One of the largest releases for KVM... Hardly any generic improvement,
but lots of architecture-specific changes.
 
 * ARM:
 - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
 - PMU support for guests
 - 32bit world switch rewritten in C
 - various optimizations to the vgic save/restore code.
 
 * PPC:
 - enabled KVM-VFIO integration ("VFIO device")
 - optimizations to speed up IPIs between vcpus
 - in-kernel handling of IOMMU hypercalls
 - support for dynamic DMA windows (DDW).
 
 * s390:
 - provide the floating point registers via sync regs;
 - separated instruction vs. data accesses
 - dirty log improvements for huge guests
 - bugfixes and documentation improvements.
 
 * x86:
 - Hyper-V VMBus hypercall userspace exit
 - alternative implementation of lowest-priority interrupts using vector
 hashing (for better VT-d posted interrupt support)
 - fixed guest debugging with nested virtualizations
 - improved interrupt tracking in the in-kernel IOAPIC
 - generic infrastructure for tracking writes to guest memory---currently
 its only use is to speedup the legacy shadow paging (pre-EPT) case, but
 in the future it will be used for virtual GPUs as well
 - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJW5r3BAAoJEL/70l94x66D2pMH/jTSWWwdTUJMctrDjPVzKzG0
 yOzHW5vSLFoFlwEOY2VpslnXzn5TUVmCAfrdmFNmQcSw6hGb3K/xA/ZX/KLwWhyb
 oZpr123ycahga+3q/ht/dFUBCCyWeIVMdsLSFwpobEBzPL0pMgc9joLgdUC6UpWX
 tmN0LoCAeS7spC4TTiTTpw3gZ/L+aB0B6CXhOMjldb9q/2CsgaGyoVvKA199nk9o
 Ngu7ImDt7l/x1VJX4/6E/17VHuwqAdUrrnbqerB/2oJ5ixsZsHMGzxQ3sHCmvyJx
 WG5L00ubB1oAJAs9fBg58Y/MdiWX99XqFhdEfxq4foZEiQuCyxygVvq3JwZTxII=
 =OUZZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "One of the largest releases for KVM...  Hardly any generic
  changes, but lots of architecture-specific updates.

  ARM:
   - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
   - PMU support for guests
   - 32bit world switch rewritten in C
   - various optimizations to the vgic save/restore code.

  PPC:
   - enabled KVM-VFIO integration ("VFIO device")
   - optimizations to speed up IPIs between vcpus
   - in-kernel handling of IOMMU hypercalls
   - support for dynamic DMA windows (DDW).

  s390:
   - provide the floating point registers via sync regs;
   - separated instruction vs.  data accesses
   - dirty log improvements for huge guests
   - bugfixes and documentation improvements.

  x86:
   - Hyper-V VMBus hypercall userspace exit
   - alternative implementation of lowest-priority interrupts using
     vector hashing (for better VT-d posted interrupt support)
   - fixed guest debugging with nested virtualizations
   - improved interrupt tracking in the in-kernel IOAPIC
   - generic infrastructure for tracking writes to guest
     memory - currently its only use is to speedup the legacy shadow
     paging (pre-EPT) case, but in the future it will be used for
     virtual GPUs as well
   - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
  KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
  KVM: x86: disable MPX if host did not enable MPX XSAVE features
  arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
  arm64: KVM: vgic-v3: Reset LRs at boot time
  arm64: KVM: vgic-v3: Do not save an LR known to be empty
  arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
  arm64: KVM: vgic-v3: Avoid accessing ICH registers
  KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
  KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
  KVM: arm/arm64: vgic-v2: Reset LRs at boot time
  KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
  KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
  KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
  KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
  KVM: s390: allocate only one DMA page per VM
  KVM: s390: enable STFLE interpretation only if enabled for the guest
  KVM: s390: wake up when the VCPU cpu timer expires
  KVM: s390: step the VCPU timer while in enabled wait
  KVM: s390: protect VCPU cpu timer with a seqcount
  KVM: s390: step VCPU cpu timer during kvm_run ioctl
  ...
2016-03-16 09:55:35 -07:00
Linus Torvalds d4e796152a Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Make schedstats a runtime tunable (disabled by default) and
     optimize it via static keys.

     As most distributions enable CONFIG_SCHEDSTATS=y due to its
     instrumentation value, this is a nice performance enhancement.
     (Mel Gorman)

   - Implement 'simple waitqueues' (swait): these are just pure
     waitqueues without any of the more complex features of full-blown
     waitqueues (callbacks, wake flags, wake keys, etc.).  Simple
     waitqueues have less memory overhead and are faster.

     Use simple waitqueues in the RCU code (in 4 different places) and
     for handling KVM vCPU wakeups.

     (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker,
     Marcelo Tosatti)

   - sched/numa enhancements (Rik van Riel)

   - NOHZ performance enhancements (Rik van Riel)

   - Various sched/deadline enhancements (Steven Rostedt)

   - Various fixes (Peter Zijlstra)

   - ... and a number of other fixes, cleanups and smaller enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
  sched/cputime: Fix steal_account_process_tick() to always return jiffies
  sched/deadline: Remove dl_new from struct sched_dl_entity
  Revert "kbuild: Add option to turn incompatible pointer check into error"
  sched/deadline: Remove superfluous call to switched_to_dl()
  sched/debug: Fix preempt_disable_ip recording for preempt_disable()
  sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity
  time, acct: Drop irq save & restore from __acct_update_integrals()
  acct, time: Change indentation in __acct_update_integrals()
  sched, time: Remove non-power-of-two divides from __acct_update_integrals()
  sched/rt: Kick RT bandwidth timer immediately on start up
  sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug
  sched/debug: Move sched_domain_sysctl to debug.c
  sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c
  sched/rt: Fix PI handling vs. sched_setscheduler()
  sched/core: Remove duplicated sched_group_set_shares() prototype
  sched/fair: Consolidate nohz CPU load update code
  sched/fair: Avoid using decay_load_missed() with a negative value
  sched/deadline: Always calculate end of period on sched_yield()
  sched/cgroup: Fix cgroup entity load tracking tear-down
  rcu: Use simple wait queues where possible in rcutree
  ...
2016-03-14 19:14:06 -07:00
David Matlack 313f636d5c kvm: cap halt polling at exactly halt_poll_ns
When growing halt-polling, there is no check that the poll time exceeds
the limit. It's possible for vcpu->halt_poll_ns grow once past
halt_poll_ns, and stay there until a halt which takes longer than
vcpu->halt_poll_ns. For example, booting a Linux guest with
halt_poll_ns=11000:

 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 0 (shrink 10000)
 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (grow 0)
 ... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)

Signed-off-by: David Matlack <dmatlack@google.com>
Fixes: aca6ff29c4
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-09 11:54:14 +01:00
Paolo Bonzini ab92f30875 KVM/ARM updates for 4.6
- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
 - PMU support for guests
 - 32bit world switch rewritten in C
 - Various optimizations to the vgic save/restore code
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW36xjAAoJECPQ0LrRPXpDGQkQAMDppzcTOixT3e8VPdHAX09a
 Z5PO0gyTMVV7Jyz5Ul3pedPJA2GSK9mxOCwqvIFbdxLAR6ZB00juO5FrTHkSdI91
 1XLPj4bKoMWcVvhL/g5A4Glp/pVMW1k/9Yq8zZAtYlsLRlqG5rLOutSadcqHcYaJ
 cTD/pFf7b2oPtkTPyoFml75KgHBT/8uvAvFDOWA66Id2z6T11+PsBT/6XnGDiwKg
 tpGTNzx3kPIKIzOAOHqVW6UBxFOeabebXLT8wUz3VwNn/UbG6gkumMNApMAyF2q1
 zU0nAh8+7Ek6Dr4OFWE6BfW6sgg/l7i1lA8XoAmqG7ZTrSptCc59fvaZJxPruG+Q
 dMsU6QgR77JJjbZTinf9a1jReZ/liZrx2gZXedVKdILrjmDSq0UnGcxjUOEDZOGy
 2/dbrlJhv+LhpcJtuPpxPCfoqbW5L0ynzmuYuXRdRz3lTHiOWIRx5gugrhO+wH4D
 4gvZhbw3XCiYfpYHYhl8A1EH5kanKgdXDocz9yIm7mZm89gngufF/HkeXS3ZU25T
 yThyBGulGjqN4FCdgf1HolkTfFjnfSx4qJovJ58eHga+HNLXRkTecZZcbFy2OOHv
 8Bx0PIlwj4RgSaRLWQUudAhdhKS2g22DKDDljxFwhkMPNghvqkYMJCRDKLu6GBXQ
 4YsLKM+TaShHFjSpx+ao
 =rpvb
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/ARM updates for 4.6

- VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
- PMU support for guests
- 32bit world switch rewritten in C
- Various optimizations to the vgic save/restore code

Conflicts:
	include/uapi/linux/kvm.h
2016-03-09 11:50:42 +01:00
Marc Zyngier 0d98d00b8d arm64: KVM: vgic-v3: Reset LRs at boot time
In order to let the GICv3 code be more lazy in the way it
accesses the LRs, it is necessary to start with a clean slate.

Let's reset the LRs on each CPU when the vgic is probed (which
includes a round trip to EL2...).

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:24:09 +00:00
Marc Zyngier 1b8e83c04e arm64: KVM: vgic-v3: Avoid accessing ICH registers
Just like on GICv2, we're a bit hammer-happy with GICv3, and access
them more often than we should.

Adopt a policy similar to what we do for GICv2, only save/restoring
the minimal set of registers. As we don't access the registers
linearly anymore (we may skip some), the convoluted accessors become
slightly simpler, and we can drop the ugly indexing macro that
tended to confuse the reviewers.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:24:04 +00:00
Marc Zyngier 667a87a928 KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
The GICD_SGIR register lives a long way from the beginning of
the handler array, which is searched linearly. As this is hit
pretty often, let's move it up. This saves us some precious
cycles when the guest is generating IPIs.

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:24:03 +00:00
Marc Zyngier cc1daf0b82 KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
So far, we're always writing all possible LRs, setting the empty
ones with a zero value. This is obvious doing a lot of work for
nothing, and we're better off clearing those we've actually
dirtied on the exit path (it is very rare to inject more than one
interrupt at a time anyway).

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:23:56 +00:00
Marc Zyngier d6400d7746 KVM: arm/arm64: vgic-v2: Reset LRs at boot time
In order to let make the GICv2 code more lazy in the way it
accesses the LRs, it is necessary to start with a clean slate.

Let's reset the LRs on each CPU when the vgic is probed.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:23:00 +00:00
Marc Zyngier f8cfbce1bb KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
On exit, any empty LR will be signaled in GICH_ELRSR*. Which
means that we do not have to save it, and we can just clear
its state in the in-memory copy.

Take this opportunity to move the LR saving code into its
own function.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:22:24 +00:00
Marc Zyngier 2a1044f8b7 KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
In order to make the saving path slightly more readable and
prepare for some more optimizations, let's move the GICH_ELRSR
saving to its own function.

No functional change.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:22:23 +00:00
Marc Zyngier c813bb17f2 KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
Next on our list of useless accesses is the maintenance interrupt
status registers (GICH_MISR, GICH_EISR{0,1}).

It is pointless to save them if we haven't asked for a maintenance
interrupt the first place, which can only happen for two reasons:
- Underflow: GICH_HCR_UIE will be set,
- EOI: GICH_LR_EOI will be set.

These conditions can be checked on the in-memory copies of the regs.
Should any of these two condition be valid, we must read GICH_MISR.
We can then check for GICH_MISR_EOI, and only when set read
GICH_EISR*.

This means that in most case, we don't have to save them at all.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:22:21 +00:00
Marc Zyngier 59f00ff9af KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
GICv2 registers are *slow*. As in "terrifyingly slow". Which is bad.
But we're equaly bad, as we make a point in accessing them even if
we don't have any interrupt in flight.

A good solution is to first find out if we have anything useful to
write into the GIC, and if we don't, to simply not do it. This
involves tracking which LRs actually have something valid there.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-09 04:22:20 +00:00
Paolo Bonzini b2740d3533 KVM: ensure __gfn_to_pfn_memslot initializes *writable
For the kvm_is_error_hva, ubsan complains if the uninitialized writable
is passed to __direct_map, even though the value itself is not used
(__direct_map goes to mmu_set_spte->set_spte->set_mmio_spte but never
looks at that argument).

Ensuring that __gfn_to_pfn_memslot initializes *writable is cheap and
avoids this kind of issue.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-04 12:35:20 +01:00
Marc Zyngier 9b4a300443 KVM: arm/arm64: timer: Add active state caching
Programming the active state in the (re)distributor can be an
expensive operation so it makes some sense to try and reduce
the number of accesses as much as possible. So far, we
program the active state on each VM entry, but there is some
opportunity to do less.

An obvious solution is to cache the active state in memory,
and only program it in the HW when conditions change. But
because the HW can also change things under our feet (the active
state can transition from 1 to 0 when the guest does an EOI),
some precautions have to be taken, which amount to only caching
an "inactive" state, and always programing it otherwise.

With this in place, we observe a reduction of around 700 cycles
on a 2GHz GICv2 platform for a NULL hypercall.

Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:22 +00:00
Shannon Zhao bb0c70bcca arm64: KVM: Add a new vcpu device control group for PMUv3
To configure the virtual PMUv3 overflow interrupt number, we use the
vcpu kvm_device ioctl, encapsulating the KVM_ARM_VCPU_PMU_V3_IRQ
attribute within the KVM_ARM_VCPU_PMU_V3_CTRL group.

After configuring the PMUv3, call the vcpu ioctl with attribute
KVM_ARM_VCPU_PMU_V3_INIT to initialize the PMUv3.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao 808e738142 arm64: KVM: Add a new feature bit for PMUv3
To support guest PMUv3, use one bit of the VCPU INIT feature array.
Initialize the PMU when initialzing the vcpu with that bit and PMU
overflow interrupt set.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao 5f0a714a2b arm64: KVM: Free perf event of PMU when destroying vcpu
When KVM frees VCPU, it needs to free the perf_event of PMU.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao 2aa36e9840 arm64: KVM: Reset PMU state when resetting vcpu
When resetting vcpu, it needs to reset the PMU state to initial status.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao b02386eb7d arm64: KVM: Add PMU overflow interrupt routing
When calling perf_event_create_kernel_counter to create perf_event,
assign a overflow handler. Then when the perf event overflows, set the
corresponding bit of guest PMOVSSET register. If this counter is enabled
and its interrupt is enabled as well, kick the vcpu to sync the
interrupt.

On VM entry, if there is counter overflowed and interrupt level is
changed, inject the interrupt with corresponding level. On VM exit, sync
the interrupt level as well if it has been changed.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao 76993739cd arm64: KVM: Add helper to handle PMCR register bits
According to ARMv8 spec, when writing 1 to PMCR.E, all counters are
enabled by PMCNTENSET, while writing 0 to PMCR.E, all counters are
disabled. When writing 1 to PMCR.P, reset all event counters, not
including PMCCNTR, to zero. When writing 1 to PMCR.C, reset PMCCNTR to
zero.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:21 +00:00
Shannon Zhao 7a0adc7064 arm64: KVM: Add access handler for PMSWINC register
Add access handler which emulates writing and reading PMSWINC
register and add support for creating software increment event.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:20 +00:00
Shannon Zhao 76d883c4e6 arm64: KVM: Add access handler for PMOVSSET and PMOVSCLR register
Since the reset value of PMOVSSET and PMOVSCLR is UNKNOWN, use
reset_unknown for its reset handler. Add a handler to emulate writing
PMOVSSET or PMOVSCLR register.

When writing non-zero value to PMOVSSET, the counter and its interrupt
is enabled, kick this vcpu to sync PMU interrupt.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:20 +00:00
Shannon Zhao 7f76635871 arm64: KVM: PMU: Add perf event map and introduce perf event creating function
When we use tools like perf on host, perf passes the event type and the
id of this event type category to kernel, then kernel will map them to
hardware event number and write this number to PMU PMEVTYPER<n>_EL0
register. When getting the event number in KVM, directly use raw event
type to create a perf_event for it.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:20 +00:00
Shannon Zhao 96b0eebcc6 arm64: KVM: Add access handler for PMCNTENSET and PMCNTENCLR register
Since the reset value of PMCNTENSET and PMCNTENCLR is UNKNOWN, use
reset_unknown for its reset handler. Add a handler to emulate writing
PMCNTENSET or PMCNTENCLR register.

When writing to PMCNTENSET, call perf_event_enable to enable the perf
event. When writing to PMCNTENCLR, call perf_event_disable to disable
the perf event.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:20 +00:00
Shannon Zhao 051ff581ce arm64: KVM: Add access handler for event counter register
These kind of registers include PMEVCNTRn, PMCCNTR and PMXEVCNTR which
is mapped to PMEVCNTRn.

The access handler translates all aarch32 register offsets to aarch64
ones and uses vcpu_sys_reg() to access their values to avoid taking care
of big endian.

When reading these registers, return the sum of register value and the
value perf event counts.

Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:20 +00:00
Marc Zyngier 6d50d54cd8 arm64: KVM: Move vgic-v2 and timer save/restore to virt/kvm/arm/hyp
We already have virt/kvm/arm/ containing timer and vgic stuff.
Add yet another subdirectory to contain the hyp-specific files
(timer and vgic again).

Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-29 18:34:18 +00:00
Ingo Molnar 6aa447bcbb Merge branch 'sched/urgent' into sched/core, to pick up fixes before applying new changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-29 09:42:07 +01:00
Marcelo Tosatti 8577370fb0 KVM: Use simple waitqueue for vcpu->wq
The problem:

On -rt, an emulated LAPIC timer instances has the following path:

1) hard interrupt
2) ksoftirqd is scheduled
3) ksoftirqd wakes up vcpu thread
4) vcpu thread is scheduled

This extra context switch introduces unnecessary latency in the
LAPIC path for a KVM guest.

The solution:

Allow waking up vcpu thread from hardirq context,
thus avoiding the need for ksoftirqd to be scheduled.

Normal waitqueues make use of spinlocks, which on -RT
are sleepable locks. Therefore, waking up a waitqueue
waiter involves locking a sleeping lock, which
is not allowed from hard interrupt context.

cyclictest command line:

This patch reduces the average latency in my tests from 14us to 11us.

Daniel writes:
Paolo asked for numbers from kvm-unit-tests/tscdeadline_latency
benchmark on mainline. The test was run 1000 times on
tip/sched/core 4.4.0-rc8-01134-g0905f04:

  ./x86-run x86/tscdeadline_latency.flat -cpu host

with idle=poll.

The test seems not to deliver really stable numbers though most of
them are smaller. Paolo write:

"Anything above ~10000 cycles means that the host went to C1 or
lower---the number means more or less nothing in that case.

The mean shows an improvement indeed."

Before:

               min             max         mean           std
count  1000.000000     1000.000000  1000.000000   1000.000000
mean   5162.596000  2019270.084000  5824.491541  20681.645558
std      75.431231   622607.723969    89.575700   6492.272062
min    4466.000000    23928.000000  5537.926500    585.864966
25%    5163.000000  1613252.750000  5790.132275  16683.745433
50%    5175.000000  2281919.000000  5834.654000  23151.990026
75%    5190.000000  2382865.750000  5861.412950  24148.206168
max    5228.000000  4175158.000000  6254.827300  46481.048691

After
               min            max         mean           std
count  1000.000000     1000.00000  1000.000000   1000.000000
mean   5143.511000  2076886.10300  5813.312474  21207.357565
std      77.668322   610413.09583    86.541500   6331.915127
min    4427.000000    25103.00000  5529.756600    559.187707
25%    5148.000000  1691272.75000  5784.889825  17473.518244
50%    5160.000000  2308328.50000  5832.025000  23464.837068
75%    5172.000000  2393037.75000  5853.177675  24223.969976
max    5222.000000  3922458.00000  6186.720500  42520.379830

[Patch was originaly based on the swait implementation found in the -rt
 tree. Daniel ported it to mainline's version and gathered the
 benchmark numbers for tscdeadline_latency test.]

Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: linux-rt-users@vger.kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1455871601-27484-4-git-send-email-wagi@monom.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-25 11:27:16 +01:00
Paolo Bonzini 0fb00d326f KVM/ARM fixes for 4.5-rc6
- Fix per-vcpu vgic bitmap allocation
 - Do not give copy random memory on MMIO read
 - Fix GICv3 APR register restore order
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWzefIAAoJECPQ0LrRPXpDHkEQAIPGVBEilV0Na9QfIcQBiSxK
 IGwFSXAIa2sScfjAyDPbSME/R912XTzdfXLgvYjoUhP8WUX3g/2dRD7OcYOh33zB
 MgUg6QRSIUIyXj6HzOsFnt/rOWlEchjGXzcyVzlQTRjJhIRyHnFprUJsVbPk1Wc8
 NJSXlyAYc3dHmJB29NjAgWRhZGmBx9SddRPfHFYLv9DoVkFGpD+TYL6XMeyfY8Eh
 PVjGipi8K8kl4DJb/pc5kOhtqoXu30JqVlgvpUAQEPSbYQSBbdmjRpd1Ol7M73b1
 sX1+UQmuIk3wcij/YpD3Ep70N5pfjgGAqms1vzBvTk6PKTXKtrjj15uOYcWgx38Z
 W9llAnlzOY5+1htirxiIdfy44gxChcWb5XTykxnJXKEaEQdVHx5E8Yc9Nf3TbNMr
 cLJh5CX9KowOxjW/HmbXXKrL2VNyb0XaecH0VWUV/QNeVqvbY/o38VRgTU0EMuoJ
 nY1QeP3DOQfpq44UHhhzY9gx3myxW4MBr/C/vcbsNi3KiHwP1BIDygenf1cq+FID
 4t/qXEJ+7ScEcDeiw+dTRPodD+6BwL4SH67aGbrxYE2yU9vugdkq2EtP3i5Z0iga
 cKPdzAcFoBJJF4OKcTjdk34dEzGiSVcDdNXhAmIzpHL6xqMwyYNIYUyrHivu3QwP
 8Ctb1ReLpiF574/JhDMo
 =/Pum
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master

KVM/ARM fixes for 4.5-rc6

- Fix per-vcpu vgic bitmap allocation
- Do not give copy random memory on MMIO read
- Fix GICv3 APR register restore order
2016-02-25 09:53:55 +01:00
Christian Borntraeger d7444794a0 KVM: async_pf: do not warn on page allocation failures
In async_pf we try to allocate with NOWAIT to get an element quickly
or fail. This code also handle failures gracefully. Lets silence
potential page allocation failures under load.

qemu-system-s39: page allocation failure: order:0,mode:0x2200000
[...]
Call Trace:
([<00000000001146b8>] show_trace+0xf8/0x148)
[<000000000011476a>] show_stack+0x62/0xe8
[<00000000004a36b8>] dump_stack+0x70/0x98
[<0000000000272c3a>] warn_alloc_failed+0xd2/0x148
[<000000000027709e>] __alloc_pages_nodemask+0x94e/0xb38
[<00000000002cd36a>] new_slab+0x382/0x400
[<00000000002cf7ac>] ___slab_alloc.constprop.30+0x2dc/0x378
[<00000000002d03d0>] kmem_cache_alloc+0x160/0x1d0
[<0000000000133db4>] kvm_setup_async_pf+0x6c/0x198
[<000000000013dee8>] kvm_arch_vcpu_ioctl_run+0xd48/0xd58
[<000000000012fcaa>] kvm_vcpu_ioctl+0x372/0x690
[<00000000002f66f6>] do_vfs_ioctl+0x3be/0x510
[<00000000002f68ec>] SyS_ioctl+0xa4/0xb8
[<0000000000781c5e>] system_call+0xd6/0x264
[<000003ffa24fa06a>] 0x3ffa24fa06a

Cc: stable@vger.kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-24 14:47:46 +01:00
Mark Rutland 236cf17c25 KVM: arm/arm64: vgic: Ensure bitmaps are long enough
When we allocate bitmaps in vgic_vcpu_init_maps, we divide the number of
bits we need by 8 to figure out how many bytes to allocate. However,
bitmap elements are always accessed as unsigned longs, and if we didn't
happen to allocate a size such that size % sizeof(unsigned long) == 0,
bitmap accesses may go past the end of the allocation.

When using KASAN (which does byte-granular access checks), this results
in a continuous stream of BUGs whenever these bitmaps are accessed:

=============================================================================
BUG kmalloc-128 (Tainted: G    B          ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in vgic_init.part.25+0x55c/0x990 age=7493 cpu=3 pid=1730
INFO: Slab 0xffffffbde6d5da40 objects=16 used=15 fp=0xffffffc935769700 flags=0x4000000000000080
INFO: Object 0xffffffc935769500 @offset=1280 fp=0x          (null)

Bytes b4 ffffffc9357694f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769510: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769520: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769530: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769540: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769550: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769560: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Object ffffffc935769570: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
Padding ffffffc9357695f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
CPU: 3 PID: 1740 Comm: kvm-vcpu-0 Tainted: G    B           4.4.0+ #17
Hardware name: ARM Juno development board (r1) (DT)
Call trace:
[<ffffffc00008e770>] dump_backtrace+0x0/0x280
[<ffffffc00008ea04>] show_stack+0x14/0x20
[<ffffffc000726360>] dump_stack+0x100/0x188
[<ffffffc00030d324>] print_trailer+0xfc/0x168
[<ffffffc000312294>] object_err+0x3c/0x50
[<ffffffc0003140fc>] kasan_report_error+0x244/0x558
[<ffffffc000314548>] __asan_report_load8_noabort+0x48/0x50
[<ffffffc000745688>] __bitmap_or+0xc0/0xc8
[<ffffffc0000d9e44>] kvm_vgic_flush_hwstate+0x1bc/0x650
[<ffffffc0000c514c>] kvm_arch_vcpu_ioctl_run+0x2ec/0xa60
[<ffffffc0000b9a6c>] kvm_vcpu_ioctl+0x474/0xa68
[<ffffffc00036b7b0>] do_vfs_ioctl+0x5b8/0xcb0
[<ffffffc00036bf34>] SyS_ioctl+0x8c/0xa0
[<ffffffc000086cb0>] el0_svc_naked+0x24/0x28
Memory state around the buggy address:
 ffffffc935769400: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffffffc935769480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffffc935769500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                   ^
 ffffffc935769580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffffffc935769600: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================

Fix the issue by always allocating a multiple of sizeof(unsigned long),
as we do elsewhere in the vgic code.

Fixes: c1bfb577a ("arm/arm64: KVM: vgic: switch to dynamic allocation")
Cc: stable@vger.kernel.org
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-23 19:02:48 +00:00
Geliang Tang 433da86023 KVM: async_pf: use list_first_entry
To make the intention clearer, use list_first_entry instead of
list_entry.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 15:40:55 +01:00
Geliang Tang e6e3b5a64e KVM: use list_for_each_entry_safe
Use list_for_each_entry_safe() instead of list_for_each_safe() to
simplify the code.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-23 15:40:53 +01:00
Christian Borntraeger 6b6de68c63 KVM: halt_polling: improve grow/shrink settings
Right now halt_poll_ns can be change during runtime. The
grow and shrink factors can only be set during module load.
Lets fix several aspects of grow shrink:
- make grow/shrink changeable by root
- make all variables unsigned int
- read the variables once to prevent races

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16 18:48:29 +01:00
Andre Przywara b3aff6ccbb KVM: arm/arm64: Fix reference to uninitialised VGIC
Commit 4b4b4512da ("arm/arm64: KVM: Rework the arch timer to use
level-triggered semantics") brought the virtual architected timer
closer to the VGIC. There is one occasion were we don't properly
check for the VGIC actually having been initialized before, but
instead go on to check the active state of some IRQ number.
If userland hasn't instantiated a virtual GIC, we end up with a
kernel NULL pointer dereference:
=========
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ffffffc9745c5000
[00000000] *pgd=00000009f631e003, *pud=00000009f631e003, *pmd=0000000000000000
Internal error: Oops: 96000006 [#2] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 2144 Comm: kvm_simplest-ar Tainted: G      D 4.5.0-rc2+ #1300
Hardware name: ARM Juno development board (r1) (DT)
task: ffffffc976da8000 ti: ffffffc976e28000 task.ti: ffffffc976e28000
PC is at vgic_bitmap_get_irq_val+0x78/0x90
LR is at kvm_vgic_map_is_active+0xac/0xc8
pc : [<ffffffc0000b7e28>] lr : [<ffffffc0000b972c>] pstate: 20000145
....
=========

Fix this by bailing out early of kvm_timer_flush_hwstate() if we don't
have a VGIC at all.

Reported-by: Cosmin Gorgovan <cosmin@linux-geek.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <stable@vger.kernel.org> # 4.4.x
2016-02-08 15:23:39 +00:00
Dan Williams ba049e93ae kvm: rename pfn_t to kvm_pfn_t
To date, we have implemented two I/O usage models for persistent memory,
PMEM (a persistent "ram disk") and DAX (mmap persistent memory into
userspace).  This series adds a third, DAX-GUP, that allows DAX mappings
to be the target of direct-i/o.  It allows userspace to coordinate
DMA/RDMA from/to persistent memory.

The implementation leverages the ZONE_DEVICE mm-zone that went into
4.3-rc1 (also discussed at kernel summit) to flag pages that are owned
and dynamically mapped by a device driver.  The pmem driver, after
mapping a persistent memory range into the system memmap via
devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus
page-backed pmem-pfns via flags in the new pfn_t type.

The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the
resulting pte(s) inserted into the process page tables with a new
_PAGE_DEVMAP flag.  Later, when get_user_pages() is walking ptes it keys
off _PAGE_DEVMAP to pin the device hosting the page range active.
Finally, get_page() and put_page() are modified to take references
against the device driver established page mapping.

Finally, this need for "struct page" for persistent memory requires
memory capacity to store the memmap array.  Given the memmap array for a
large pool of persistent may exhaust available DRAM introduce a
mechanism to allocate the memmap from persistent memory.  The new
"struct vmem_altmap *" parameter to devm_memremap_pages() enables
arch_add_memory() to use reserved pmem capacity rather than the page
allocator.

This patch (of 18):

The core has developed a need for a "pfn_t" type [1].  Move the existing
pfn_t in KVM to kvm_pfn_t [2].

[1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html
[2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:56:32 -08:00
Linus Torvalds 1baa5efbeb * s390: Support for runtime instrumentation within guests,
support of 248 VCPUs.
 
 * ARM: rewrite of the arm64 world switch in C, support for
 16-bit VM identifiers.  Performance counter virtualization
 missed the boat.
 
 * x86: Support for more Hyper-V features (synthetic interrupt
 controller), MMU cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJWlSKwAAoJEL/70l94x66DY0UIAK5vp4zfQoQOJC4KP4Xgxwdu
 kpnK2Boz3/74o1b0y5+eJZoUZCsXCVLtmP5uhmMxUYWDgByFG2X8ZDhPFwB5FYLT
 2dN+Lr4tsolgIfRdHZtrT6Svp9SDL039bWTdscnbR6l37/j9FRWvpKdhI3orloFD
 /i4CSW2dVIq1/9Xctwu/rtcOEesEx4Cad+6YV3/530eVAXFzE908nXfmqJNZTocY
 YCGcmrMVCOu0ng5QM4xSzmmYjKMLUcRs+QzZWkVBzdJtTgwZUr09yj7I2dZ1yj/i
 cxYrJy6shSwE74XkXsmvG+au3C5u3vX4tnXjBFErnPJ99oqzHatVnFWNRhj4dLQ=
 =PIj1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "PPC changes will come next week.

   - s390: Support for runtime instrumentation within guests, support of
     248 VCPUs.

   - ARM: rewrite of the arm64 world switch in C, support for 16-bit VM
     identifiers.  Performance counter virtualization missed the boat.

   - x86: Support for more Hyper-V features (synthetic interrupt
     controller), MMU cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (115 commits)
  kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROL
  kvm/x86: Hyper-V SynIC timers tracepoints
  kvm/x86: Hyper-V SynIC tracepoints
  kvm/x86: Update SynIC timers on guest entry only
  kvm/x86: Skip SynIC vector check for QEMU side
  kvm/x86: Hyper-V fix SynIC timer disabling condition
  kvm/x86: Reorg stimer_expiration() to better control timer restart
  kvm/x86: Hyper-V unify stimer_start() and stimer_restart()
  kvm/x86: Drop stimer_stop() function
  kvm/x86: Hyper-V timers fix incorrect logical operation
  KVM: move architecture-dependent requests to arch/
  KVM: renumber vcpu->request bits
  KVM: document which architecture uses each request bit
  KVM: Remove unused KVM_REQ_KICK to save a bit in vcpu->requests
  kvm: x86: Check kvm_write_guest return value in kvm_write_wall_clock
  KVM: s390: implement the RI support of guest
  kvm/s390: drop unpaired smp_mb
  kvm: x86: fix comment about {mmu,nested_mmu}.gva_to_gpa
  KVM: x86: MMU: Use clear_page() instead of init_shadow_page_table()
  arm/arm64: KVM: Detect vGIC presence at runtime
  ...
2016-01-12 13:22:12 -08:00
Paolo Bonzini 2860c4b167 KVM: move architecture-dependent requests to arch/
Since the numbers now overlap, it makes sense to enumerate
them in asm/kvm_host.h rather than linux/kvm_host.h.  Functions
that refer to architecture-specific requests are also moved
to arch/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-08 19:04:36 +01:00
Paolo Bonzini def840ede3 KVM/ARM changes for Linux v4.5
- Complete rewrite of the arm64 world switch in C, hopefully
   paving the way for more sharing with the 32bit code, better
   maintainability and easier integration of new features.
   Also smaller and slightly faster in some cases...
 - Support for 16bit VM identifiers
 - Various cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWe80IAAoJECPQ0LrRPXpDdt8P/ittxzklIT7rsZxdOiIY6vLQ
 i2hWGo1KdZR+8rsNyQEeGyg2Ocdja0Vld9ciBKgXKeKtc6x6AHfq0x6eyGRbF2jJ
 Wdkd2a9lLJVJJIf1LBhOQuwjNiEvAgvqO5nwXL77s/rqx3Ur5OlyohSvRFBy7Pqp
 8cdnCV/43I/y7k0iGhitFVrEC9TL0cfeJmM7YhXkt8IcpkcpCDfgdI7wgIb0ntvv
 dqvrRmfp+Q3/hJ6SVRsy6uzOrjFjRE8hIIG6TiqfRd/FgI5x2xvGkSAE3Wx2YdRM
 myPDiAuY2wOyALZpn9zD7qFMOfI2wX8kaX5S/ctnbvLelkmQblI39/zfYuxJ36xC
 Mo2yMKcvT37AIMz2fxx3mGnIR7NZBNXVQGJmv/1p9vMQ8RbUXUhT0w6hP5SH9S7m
 RDoOkfd37wQugQ7bgI7cqg4hodMRlybGPq8QaKp80y0Ej3cPblM+y0fbR153SSbS
 6nCwYceFLdWJEV+tTFpKD5cvxOGeYfoC/8LcVRYRcWg6nlr4+qo61MHevyCe/Qxw
 Pw+z9wFpoVKumRT72KmzFUxFQqRnTshE3KJqNJdsqMPM8ZuW5TJ/MtUa+JdAWmSH
 dEAqd7Hy5W1CqgGEk+los+QlKw+5uFepcZ7SOuQ2ehME/Ae3xI8s9+UE6yqeHx6Y
 PV2s5lyJRCPfm3qOu7TS
 =wuir
 -----END PGP SIGNATURE-----

Merge tag 'kvm-arm-for-4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

KVM/ARM changes for Linux v4.5

- Complete rewrite of the arm64 world switch in C, hopefully
  paving the way for more sharing with the 32bit code, better
  maintainability and easier integration of new features.
  Also smaller and slightly faster in some cases...
- Support for 16bit VM identifiers
- Various cleanups
2016-01-07 11:00:57 +01:00
Marc Zyngier 9d8415d6c1 arm64: KVM: Turn system register numbers to an enum
Having the system register numbers as #defines has been a pain
since day one, as the ordering is pretty fragile, and moving
things around leads to renumbering and epic conflict resolutions.

Now that we're mostly acessing the sysreg file in C, an enum is
a much better type to use, and we can clean things up a bit.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-12-14 11:30:43 +00:00
Marc Zyngier 3c13b8f435 KVM: arm/arm64: vgic-v3: Make the LR indexing macro public
We store GICv3 LRs in reverse order so that the CPU can save/restore
them in rever order as well (don't ask why, the design is crazy),
and yet generate memory traffic that doesn't completely suck.

We need this macro to be available to the C version of save/restore.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-14 11:30:38 +00:00
Jisheng Zhang 8cdb654abe KVM: arm/arm64: vgic: make vgic_io_ops static
vgic_io_ops is only referenced within vgic.c, so it can be declared
static.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-12-14 11:29:59 +00:00
Christoffer Dall fdec12c12e KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check
External inputs to the vgic from time to time need to poke into the
state of a virtual interrupt, the prime example is the architected timer
code.

Since the IRQ's active state can be represented in two places; the LR or
the distributor, we first loop over the LRs but if not active in the LRs
we just return if *any* IRQ is active on the VCPU in question.

This is of course bogus, as we should check if the specific IRQ in
quesiton is active on the distributor instead.

Reported-by: Eric Auger <eric.auger@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-11 16:33:31 +00:00
Janosch Frank 4bd33b5688 KVM: Remove unnecessary debugfs dentry references
KVM creates debugfs files to export VM statistics to userland. To be
able to remove them on kvm exit it tracks the files' dentries.

Since their parent directory is also tracked and since each parent
direntry knows its children we can easily remove them by using
debugfs_remove_recursive(kvm_debugfs_dir). Therefore we don't
need the extra tracking in the kvm_stats_debugfs_item anymore.

Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-11-30 12:47:05 +01:00
David Hildenbrand e09fefdeeb KVM: Use common function for VCPU lookup by id
Let's reuse the new common function for VPCU lookup by id.

Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out the new function into a separate patch]
2015-11-30 12:47:04 +01:00
Yaowei Bai 33e9415479 KVM: kvm_is_visible_gfn can be boolean
This patch makes kvm_is_visible_gfn return bool due to this particular
function only using either one or zero as its return value.

No functional change.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25 17:24:23 +01:00
Markus Elfring 4f52696a6c KVM-async_pf: Delete an unnecessary check before the function call "kmem_cache_destroy"
The kmem_cache_destroy() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25 17:24:23 +01:00
Andrey Smetanin abdb080f7a kvm/irqchip: kvm_arch_irq_routing_update renaming split
Actually kvm_arch_irq_routing_update() should be
kvm_arch_post_irq_routing_update() as it's called at the end
of irq routing update.

This renaming frees kvm_arch_irq_routing_update function name.
kvm_arch_irq_routing_update() weak function which will be used
to update mappings for arch-specific irq routing entries
(in particular, the upcoming Hyper-V synthetic interrupts).

Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Gleb Natapov <gleb@kernel.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Roman Kagan <rkagan@virtuozzo.com>
CC: Denis V. Lunev <den@openvz.org>
CC: qemu-devel@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-11-25 17:24:21 +01:00
Christoffer Dall 9f958c11b7 KVM: arm/arm64: vgic: Trust the LR state for HW IRQs
We were probing the physial distributor state for the active state of a
HW virtual IRQ, because we had seen evidence that the LR state was not
cleared when the guest deactivated a virtual interrupted.

However, this issue turned out to be a software bug in the GIC, which
was solved by: 84aab5e68c2a5e1e18d81ae8308c3ce25d501b29
(KVM: arm/arm64: arch_timer: Preserve physical dist. active
state on LR.active, 2015-11-24)

Therefore, get rid of the complexities and just look at the LR.

Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2015-11-24 18:08:37 +01:00