Include newly added fields 'mmap2', 'comm_exec', 'use_clockid', 'namespaces',
'write_backward' and 'context_switch' from perf_event_attr to store_event().
Signed-off-by: Seonghyun Park <seonghyun0p@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Seonghyun Park <seonghyun0p@gmail.com>
Link: http://lkml.kernel.org/n/tip-vltn7pqhcv8h5fmo9cthk87q@git.kernel.org
[ Fix log message to add 'write_backward', fix the patch to add 'use_clock_id' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Otherwise we fail on virtual machines with no support for specific HW
events.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171009130712.14747-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In debian/ubuntu, libc.so is located at a different place,
/lib/x86_64-linux-gnu/libc-2.23.so, so it outputs like this when testing:
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.040 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.040/0.040/0.040/0.000 ms
0.000 probe_libc:inet_pton:(7f0e2db741c0))
__GI___inet_pton (/lib/x86_64-linux-gnu/libc-2.23.so)
getaddrinfo (/lib/x86_64-linux-gnu/libc-2.23.so)
[0xffffa9d40f34ff4d] (/bin/ping)
Fix up the libc path to make sure this test works in more OSes.
Committer testing:
When this test fails one can use 'perf test -v', i.e. in verbose mode, where
it'll show the expected backtrace, so, after applying this test:
On Fedora 26:
# perf test -v ping
62: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 23322
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fe344310d80))
__GI___inet_pton (/usr/lib64/libc-2.25.so)
getaddrinfo (/usr/lib64/libc-2.25.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philip Li <philip.li@intel.com>
Link: http://lkml.kernel.org/r/1508315649-18836-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We started to use group read whenever it's possible:
82bf311e15 perf stat: Use group read for event groups
That breaks some of attr tests, this change adds the new possible
read_format value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170928160633.GA26973@krava
Link: http://lkml.kernel.org/n/tip-1ko2zc4nph93d8lfwjyk9ivz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The proc files which is sorted with alphabetical order are evenly
assigned to several synthesize threads to be processed in parallel.
For 'perf top', the threads number hard code to online CPU number. The
following patch will introduce an option to set it.
For other perf tools, the thread number is 1. Because the process
function is not ready for multithreading, e.g.
process_synthesized_event.
This patch series only support event synthesize multithreading for 'perf
top'. For other tools, it can be done separately later.
With multithread applied, the total processing time can get up to 1.56x
speedup on Knights Mill for 'perf top'.
For specific single event processing, the processing time could increase
because of the lock contention. So proc_map_timeout may need to be
increased. Otherwise some proc maps will be truncated.
Based on my test, increasing the proc_map_timeout has small impact
on the total processing time. The total processing time still get 1.49x
speedup on Knights Mill after increasing the proc_map_timeout.
The patch itself doesn't increase the proc_map_timeout.
Doesn't need to implement multithreading for per task monitoring,
perf_event__synthesize_thread_map. It doesn't have performance issue.
Committer testing:
# getconf _NPROCESSORS_ONLN
4
# perf trace --no-inherit -e clone -o /tmp/output perf top
# tail -4 /tmp/bla
0.124 ( 0.041 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eb3a8f30, parent_tidptr: 0x7fc3eb3a99d0, child_tidptr: 0x7fc3eb3a99d0, tls: 0x7fc3eb3a9700) = 9548 (perf)
0.246 ( 0.023 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3eaba7f30, parent_tidptr: 0x7fc3eaba89d0, child_tidptr: 0x7fc3eaba89d0, tls: 0x7fc3eaba8700) = 9549 (perf)
0.286 ( 0.019 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9550 (perf)
246.540 ( 0.047 ms): clone(flags: VM|FS|FILES|SIGHAND|THREAD|SYSVSEM|SETTLS|PARENT_SETTID|CHILD_CLEARTID, child_stack: 0x7fc3ea3a6f30, parent_tidptr: 0x7fc3ea3a79d0, child_tidptr: 0x7fc3ea3a79d0, tls: 0x7fc3ea3a7700) = 9551 (perf)
#
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Lukasz Odzioba <lukasz.odzioba@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1506696477-146932-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Command perf test -v 16 (Setup struct perf_event_attr test) always
reports success even if the test case fails. It works correctly if you
also specify -F (for don't fork).
root@s35lp76 perf]# ./perf test -v 16
15: Setup struct perf_event_attr :
--- start ---
running './tests/attr/test-record-no-delay'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB /tmp/tmp4E1h7R/perf.data
(1 samples) ]
expected task=0, got 1
expected precise_ip=0, got 3
expected wakeup_events=1, got 0
FAILED './tests/attr/test-record-no-delay' - match failure
test child finished with 0
---- end ----
Setup struct perf_event_attr: Ok
The reason for the wrong error reporting is the return value of the
system() library call. It is called in run_dir() file tests/attr.c and
returns the exit status, in above case 0xff00.
This value is given as parameter to the exit() function which can only
handle values 0-0xff.
The child process terminates with exit value of 0 and the parent does
not detect any error.
This patch corrects the error reporting and prints the correct test
result.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-rdube6rfcjsr1nzue72c7lqn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit d78ada4a76 ("perf tests attr: Do not store failed events") does
not create an event file in the /tmp directory when the
perf_open_event() system call failed.
This can lead to a situation where not /tmp/event-xx-yy-zz result file
exists at all (for example on a s390x virtual machine environment) where
no CPUMF hardware is available.
The following command then fails with a python call back chain instead
of printing failure:
[root@s8360046 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -v -ttest-stat-basic
running './tests/attr//test-stat-basic'
Traceback (most recent call last):
File "./tests/attr.py", line 379, in <module>
main()
File "./tests/attr.py", line 370, in main
run_tests(options)
File "./tests/attr.py", line 311, in run_tests
Test(f, options).run()
File "./tests/attr.py", line 300, in run
self.compare(self.expect, self.result)
File "./tests/attr.py", line 248, in compare
exp_event.diff(res_event)
UnboundLocalError: local variable 'res_event' referenced before assignment
[root@s8360046 perf]#
This patch catches this pitfall and prints an error message instead:
[root@s8360047 perf]# /usr/bin/python2 ./tests/attr.py -d ./tests/attr/ \
-p ./perf -vvv -ttest-stat-basic
running './tests/attr//test-stat-basic'
loading expected events
Event event:base-stat
fd = 1
group_fd = -1
flags = 0|8
[....]
sample_regs_user = 0
sample_stack_user = 0
'PERF_TEST_ATTR=/tmp/tmpJbMQMP ./perf stat -o /tmp/tmpJbMQMP/perf.data -e cycles kill >/dev/null 2>&1' ret '1', expected '1'
loading result events
compare
matching [event:base-stat]
match: [event:base-stat] matches []
res_event is empty
FAILED './tests/attr//test-stat-basic' - match failure
[root@s8360047 perf]#
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
LPU-Reference: 20170913081209.39570-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-04d63nn7svfgxdhi60gq2mlm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_event_attr::task is 1 by default for first (tracking) event in
the session. Setting task=1 as default and adding task=0 for cases that
need it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-16-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are no usage outside util.c and this is the only remaining reason
for fcntl.h to be included in util.h, to get the loff_t definition in
Alpine Linux, so make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2dzlsao7k6ihozs5karw6kpx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When cross compiling perf and I want to link against a self-compiled
libunwind, I usually make the custom path where the libunwind headers
exist visible by adding the libunwind prefix to the include path when
compiling perf, i.e.:
~~~~~
$ ls $HOME/projects/compiled/other/include/
libunwind-coredump.h libunwind.h libunwind-x86_64.h
libunwind-common.h libunwind-dynamic.h libunwind-ptrace.h
unwind.h
$ make EXTRA_CFLAGS="-I$HOME/projects/compiled/other/include/
~~~~~~
Note the `unwind.h` header from libunwind which leads to compile
errors when compiling tests/dwarf-unwind.c, since it shadows perf's
util/unwind.h:
~~~~~
tests/dwarf-unwind.c:41:32: error: ‘struct unwind_entry’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
static int unwind_entry(struct unwind_entry *entry, void *arg)
^~~~~~~~~~~~
tests/dwarf-unwind.c: In function ‘unwind_entry’:
tests/dwarf-unwind.c:44:22: error: dereferencing pointer to incomplete type ‘struct unwind_entry’
char *symbol = entry->sym ? entry->sym->name : NULL;
^~
tests/dwarf-unwind.c: In function ‘unwind_thread’:
tests/dwarf-unwind.c:92:8: error: implicit declaration of function ‘unwind__get_entries’; did you mean ‘unwind_entry’? [-Werror=implicit-function-declaration]
err = unwind__get_entries(unwind_entry, &cnt, thread,
^~~~~~~~~~~~~~~~~~~
unwind_entry
tests/dwarf-unwind.c:92:8: error: nested extern declaration of ‘unwind__get_entries’ [-Werror=nested-externs]
~~~~~~
Fix this compile error by specificing an explicit include of perf's
unwind.h in the util folder.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170906150209.12579-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend sample-parsing test cases to support new sample type
PERF_SAMPLE_PHYS_ADDR.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-6-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'Object code reading' test always fails on powerpc guest. Two reasons
for the failure are:
1. When elf section is too big (size beyond 'unsigned int' max value).
objdump fails to disassemble from such section. This was fixed with
commit 0f6329bd7fc ("binutils/objdump: Fix disassemble for huge elf
sections") in binutils.
2. When the sample is from hypervisor. Hypervisor symbols can not be
resolved within guest and thus thread__find_addr_map() fails for such
symbols. Fix this by ignoring hypervisor symbols in the test.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1504170896-7876-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to perf test to test data source printing.
v2: Make the tests actually checked for the correct name of Forward
v3: Adjust to new encoding
Committer notes:
Avoid the in place declaration to make this build with older compilers,
for instance, in Debian 7 we get:
tests/mem.c: In function 'test__mem':
tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers]
tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers]
So just zero a struct, then go on building the unions as needed,
reusing settings from the previous test, i.e. local -> remote, etc.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the expression parser for more complex metric formulas.
- Support python style IF ELSE operators
- Add an #SMT_On magic variable for formulas that depend on the SMT
status.
Example: 4 *( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles
- Support MIN/MAX operations
Example: min(1 , IDQ.MITE_UOPS / ( UPI * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )
This is useful to fix up problems caused by multiplexing.
- Support | & ^ operators
- Minor cleanups and fixes
- Support an \ escape for operators. This allows to specify event names
like c2-residency
- Support @ as an alternative for / to be able to specify pmus without
conflicts with operators (like msr/tsc/ as msr@tsc@)
Example: (cstate_core@c3\\-residency@ / msr@tsc@) * 100
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix buffer overflow for:
% perf stat -e msr/tsc/,cstate_core/c7-residency/ true
that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:
=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)
0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.
v2:
Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.
The actual perf event reading still uses the original values from the
evsel list.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling them just "data" is too vague, call it 'perf_state', to make it
clearer, for instance, when looking at patch hunks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it from 'parse_events_evlist' to 'parse_events_state' to better
state that this is parsing state that has to be passed around.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/n/tip-ji5mhn3iilgch3eaay6csr6z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf's BPF prologue generator unconditionally fetches 8 bytes for
function parameters, which causes problems on big endian machines. Thomas
gives a detailed analysis for this problem:
http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com
---- 8< ----
I investigated perf test BPF for s390x and have a question regarding
the 38.3 subtest (bpf-prologue test) which fails on s390x.
When I turn on trace_printk in tests/bpf-script-test-prologue.c
I see this output in /sys/kernel/debug/tracing/trace:
[root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace
perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0
perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0
[...]
There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c
accesses: f_mode (member of struct file at offset 140) offset and orig. They
are parameters of the lseek() system call triggered in this test case in
function llseek_loop().
What is really strange is the value of f_mode. It is an 8 byte value, whereas
in the probe event it is defined as a 4 byte value. The lower 4 bytes are all
zero and do not belong to member f_mode. The correct value should be 2001d for
read-only and 6001f for read-write open mode.
Here is the output of the 'perf test -vv bpf' trace:
Try to find probe point from debuginfo.
Matched function: null_lseek [2d9310d]
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Opening /sys/kernel/debug/tracing//README write=0
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32
---- 8< ----
This patch parses the type of each argument and converts data from memory to
expected type.
Now the test runs successfully on 4.13.0-rc5:
[root@s8360046 perf]# ./perf test bpf
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
[root@s8360046 perf]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If that is the case, or if the required lib is not present, e.g.
elfutils-devel in Fedora systems, then just skip the tests requiring
DWARF analysis.
Before:
# rpm -e elfutils-devel
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : FAILED!
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: FAILED!
63: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Skip
62: Check open filename arg using perf trace + vfs_getname: Skip
63: Add vfs_getname probe to get syscall args filenames : Skip
#
Then, reinstalling elfutils-devel, rebuilding the tool and running
again:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d67tvn401fxrwr97pu5ihfb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a library function that checks if 'perf probe' is built into the
tool being tested, skipping tests that need it.
Testing it on a system after removing the library needed to build
'probe' as a perf subcommand:
# perf test ping vfs_getname
59: Use vfs_getname probe to get syscall args filenames : Skip
60: probe libc's inet_pton & backtrace it with ping : Skip
61: Check open filename arg using perf trace + vfs_getname: Skip
62: Add vfs_getname probe to get syscall args filenames : Skip
# perf probe
perf: 'probe' is not a perf-command. See 'perf --help'.
#
Now reinstalling elfutils-libelf-devel on this Fedora 26 system to
rebuild perf and then retest this:
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ctdck2gzsskqhjzu3ebb62zm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3zxjswdbs2au3ih0rino0iy1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Installs a probe on libc's inet_pton function, that will use uprobes,
then use 'perf trace' on a ping to localhost asking for just one packet
with the a backtrace 3 levels deep, check that it is what we expect.
This needs no debuginfo package, all is done using the libc ELF symtab
and the CFI info in the binaries.
Testing it:
# perf test ping
61: probe libc's inet_pton & backtrace it with ping : Ok
In verbose mode:
# perf test -v ping
61: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1007
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7f75fce12a20))
__GI___inet_pton (/usr/lib64/libc-2.24.so)
getaddrinfo (/usr/lib64/libc-2.24.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-idrntt4nbg15aafu8hjmv7sk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.
Testing it:
# perf test "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname: Ok
#
# perf test -v "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 30846
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.
Using it:
# perf test "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames: Ok
# perf test -v "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 16414
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
Recording open file:
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
Looking at perf.data file for vfs_getname records for the file we touched:
touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
test child finished with 0
---- end ----
Use vfs_getname probe to get syscall args filenames: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
First perf shell test:
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Ok
#
In verbose mode:
# perf test -v vfs_getname
60: Add vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 19146
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
test child finished with 0
---- end ----
Add vfs_getname probe to get syscall args filenames: Ok
#
And if the vmlinux file is not found:
# mv ../build/v4.12.0-rc6+/vmlinux ../build/v4.12.0-rc6+/vmlinux.hidden
# perf test vfs_getname
60: Add vfs_getname probe to get syscall args filenames: Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8f3n22c1yn516ev30s603ow2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v95tqqzuwawsmds3zn2mosje@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow testing by directly using perf tools in scripts, checking that
the effects on the system are the ones expected and that the output
produced is as well the desired one.
For instance, adding a probe at a well known location with 'perf probe',
then checking that the results from using that probe to record are the
desired ones, etc.
The next csets will introduce tests using this new testing
infrastructure.
The scripts should return 0 for Ok, 1 for FAIL and 2 for SKIP.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-swbpn7amrjqffh83lsr39s9p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This way we'll be able to pass more test specific parameters without
having to change this function signature.
Will be used by the upcoming 'shell tests', shell scripts that will
call perf tools and check if they work as expected, comparing its
effects on the system (think 'perf probe foo') the output produced, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wq250w7j1opbzyiynozuajbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
1: Synthesize thread map
2: Synthesize cpu map
3: Synthesize stat config
4: Synthesize stat
5: Synthesize stat round
6: Synthesize attr update
#
After:
# perf test Synth
39: Synthesize thread map : Ok
41: Synthesize cpu map : Ok
42: Synthesize stat config : Ok
43: Synthesize stat : Ok
44: Synthesize stat round : Ok
45: Synthesize attr update : Ok
#
# perf test list Synth
39: Synthesize thread map
41: Synthesize cpu map
42: Synthesize stat config
43: Synthesize stat
44: Synthesize stat round
45: Synthesize attr update
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pjhuhkphs7o3tkbqrukfv6bz@git.kernel.org
Fixes: e8210cefb7 ("perf tests: Introduce iterator function for tests")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the stat events are quite rare to find on common machines (like
front end cycles).
Adding an 'optional' term to mark such events in attr tests. Event
marked as optional will not fail the test case if it's not found in
results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
>From following commit:
commit 4979d0c7d0 ("perf stat record: Add record command")
we started to assign PERF_SAMPLE_IDENTIFIER to sample_type.
Fixing the attr stat tests accordingly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We have a test to detect to highest precise possible, so test can't just
predict precise_ip value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The final period can differ from what user specifies on command line due
to the perf_event_max_sample_rate sysctl setup.
Thus we can't predixt the sample_period value any more.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The stat command creates all events disabled and enables them either
manualy or via the enable_on_exec bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The record command now properly returns the status of the tracee if
there's any. We need to properly set the expected return value of the
tracee in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
removed '-D' option and renamed --no-delay into --no-buffering.
Fixing that in the attr tests.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 509051ea84 ("perf record: Rename --no-delay to --no-buffering")
Link: http://lkml.kernel.org/r/20170703145030.12903-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following commit:
commit 5c0cf22477 ("perf record: Store data mmaps for dwarf unwind")
have enabled address sampling for dwarf unwind, we need to reflect that
in this test by adding ADDR sample_type and enabling mmap_data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's an event open fallback which set exclude_kernel=1 in case use
does not have enough privileges. Adding both 0|1 for this attribute,
because we don't know what value it is.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The data_equal name fits better to the return value of the function.
It's true when the data is equal.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Making compare_data global, so it could be used outside
the Test class scope to compare command results.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We create many test events before the real ones just to test specific
features. But there's no way for attr tests to separate those test
events from those it needs to check.
Adding 'ready' call from the events open interface to trigger/start
events collection for attr test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do not mess up our temp space with files we don't
need - failed event open attempts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170703145030.12903-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can return NULL, in which case we should bail out and remove the
directory created with mkdtemp(), which is stored in the "__tempdir"
variable, not in "tempdir".
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 8e5dc84835 ("perf test: Add a test case for SDT event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Teach buildid-cache how to add, remove, and update binary objects from
other mount namespaces. Allow probe events tracing binaries in
different namespaces to add their objects to the probe and build-id
caches too. As a handy side effect, this also lets us access SDT probes
in binaries from alternate mount namespaces.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com
[ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Finally can nuke this function, no more users.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-eivvvzn8ie6w42gy3batxoy7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now everything uses pr_warning(), so ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-hv8r0mgdhk73wtfq3zrhavgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds platform dependency into the test case 15
(perf_event_attr). It is based on a suggestion from Jiri Olsa.
Add a new optional attribute named 'arch' in the [config] section of the
test case file. It is a comma separated list of architecture names this
test can be executed on. For example:
arch = x86_64,alpha,ppc
If this attribute is missing the test is executed on any platform. This
does not break existing behavior.
The values listed for this attribute should be identical to uname -m
output.
If the list starts with an exclamation mark (!) the comparison is
inverted, for example for
arch = !s390x,ppc
the test is not executed on s390x or ppc platforms. The exclamation
mark must be at the beginnning of the list.
Here is an example debug output:
[root@s35lp76]# fgrep arch tests/attr/test-stat-C2
arch = x86_64,alpha,ppc
[root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
-d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1
provides the following output:
running './tests/attr//test-stat-C1'
test limitation 'x86_64,alpha,ppc' <--- new
loading expected events
Event event:base-stat
fd = 1
group_fd = -1
.....
Here is the output when a test is skipped:
[root@s35lp76]# fgrep arch tests/attr/test-stat-C1
arch = !s390x
[root@s35lp76]# PERF_TEST_ATTR=/tmp /usr/bin/python2 ./tests/attr.py \
-d ./tests/attr/ -p ./perf -vvvvv -t test-stat-C1
provides the following output:
test limitation '!s390x' <--- new
skipped [s390x] './tests/attr//test-stat-C1' <--- new
The test is skipped with return code 0.
Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/20170622073625.86762-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'if' keyword is a define that expands to complex code when
CONFIG_PROFILE_ALL_BRANCHES is selected, which causes a 'perf test LLVM'
failure like:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
The only affected test case is bpf-script-test-prologue.c
because it uses kernel headers and has 'if' inside.
This patch undefines 'if' to make it passes perf test.
More detailed analysis from a message in this thread, also by Wang:
The problem is caused by following relocation information:
$ readelf -a ./llvmsubtest3
...
[ 5] _ftrace_branch PROGBITS 0000000000000000 00000260
00000000000000a0 0000000000000000 WA 0 0 4
...
Relocation section '.relfunc=null_lseek file->f_mode offset orig' at
offset 0x490 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000038 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000000b0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
000000000128 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000001c0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
Relocation section '.rel_ftrace_branch' at offset 0x4d0 contains 8 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000008 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000028 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000030 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000050 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000058 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000078 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000080 000100000001 unrecognized: 1 0000000000000015 .L.str
...
So I think the failure is because you enabled CONFIG_PROFILE_ALL_BRANCHES.
I can reproduce your buggy result by selecting
CONFIG_PROFILE_ALL_BRANCHES in my kbuild:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
Simply undef CONFIG_PROFILE_ALL_BRANCHES in clang opts not working
because it is introduced by "#include <uapi/linux/fs.h>", which override
cmdline options. So I think the best way is to undefine 'if' inside BPF
script.
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20170620183203.2517-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler not to inline a function
and to make tools/ source code look like kernel code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bis4pqxegt6gbm5dlqs937tn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With commit: 0a943cb10c (tools build: Add HOSTARCH Makefile variable)
when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of
ARCH=x86, so the perf build process searchs header files from
tools/arch/x86_64/include, which doesn't exist.
The following build failure is seen:
In file included from util/event.c:2:0:
tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
compilation terminated.
Fix this issue by using SRCARCH instead of ARCH in perf, just like the
main kernel Makefile and tools/objtool's.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0a943cb10c ("tools build: Add HOSTARCH Makefile variable")
Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 18e7a45af9 ("perf/x86: Reject non sampling events with
precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute
with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done
in the routine used to probe the max precise level when no events were
passed to 'perf record' or 'perf top', i.e.:
perf_evsel__new_cycles()
perf_event_attr__set_max_precise_ip()
The x86 code, in x86_pmu_hw_config(), which is called all the way from
sys_perf_event_open() did, starting with the aforementioned commit:
/* There's no sense in having PEBS for non sampling events: */
if (!is_sampling_event(event))
return -EINVAL;
Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using
just the non precise cycles variant.
To make sure that this is the case, I tested it, before this patch,
with:
# perf probe -L x86_pmu_hw_config
<x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0>
0 int x86_pmu_hw_config(struct perf_event *event)
1 {
2 if (event->attr.precise_ip) {
<SNIP>
17 if (event->attr.precise_ip > precise)
18 return -EOPNOTSUPP;
/* There's no sense in having PEBS for non sampling events: */
21 if (!is_sampling_event(event))
22 return -EINVAL;
}
<SNIP>
# perf probe x86_pmu_hw_config:22
Added new events:
probe:x86_pmu_hw_config (on x86_pmu_hw_config:22)
probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22)
You can now use it in all perf tools, such as:
perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1
# perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1
0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]
#
I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times.
So fix it by just setting attr.sample_period
Now, after this patch:
# perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1
[ perf record: Woken up 1 times to write data ]
0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_open_cloexec_flag (/home/acme/bin/perf)
0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
#
The probe one called from perf_event_attr__set_max_precise_ip() works
the first time, with attr.precise_ip = 3, wit hthe next ones being the
per cpu ones for the cycles:ppp event.
And here is the text from a report and alternative proposed patch by
Thomas-Mich Richter:
---
On s390 the counter and sampling facility do not support a precise IP
skid level and sometimes returns EOPNOTSUPP when structure member
precise_ip in struct perf_event_attr is not set to zero.
On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This
happens only when no events are specified on command line.
The functions called are
...
--> perf_evlist__add_default
--> perf_evsel__new_cycles
--> perf_event_attr__set_max_precise_ip
The last function determines the value of structure member precise_ip by
invoking the perf_event_open() system call and checking the return code.
The first successful open is the value for precise_ip.
However the value is determined without setting member sample_period and
indicates no sampling.
On s390 the counter facility and sampling facility are different. The
above procedure determines a precise_ip value of 3 using the counter
facility. Later it uses the sampling facility with a value of 3 and
fails with EOPNOTSUPP.
---
v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members
of unnamed union members in the container struct initialization, so
move from:
struct perf_event_attr attr = {
...
.sample_period = 1,
};
to right after it as:
struct perf_event_attr attr = {
...
};
attr.sample_period = 1;
v3: We need to reset .sample_period to 0 to let the users of
perf_evsel__new_cycles() to properly setup attr.sample_period or
attr.sample_freq. Reported by Ingo Molnar.
Reported-and-Acked-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 18e7a45af9 ("perf/x86: Reject non sampling events with precise_ip")
Link: http://lkml.kernel.org/n/tip-yv6nnkl7tzqocrm0hl3x7vf1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a kernel modules is compressed, it should be decompressed before
running objdump to parse binary data correctly. This fixes a failure of
object code reading test for me.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170608073109.30699-8-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following tests are failing on powerpc:
# perf test break
18: Breakpoint overflow signal handler : FAILED!
19: Breakpoint overflow sampling : FAILED!
The powerpc kenel so far does not have support to even create
instruction breakpoints using the perf event interface, so those tests
fail early in the config phase.
I added a '->is_supported()' callback to test struct to be able to
disable specific tests. It seems better than putting ifdefs directly to
the test array.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170601205450.GA398@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
__kmod_path__parse() uses is_supported_compression() to determine and
parse out compressed module file extensions. On systems without zlib,
this test fails and __kmod_path__parse() continues to strcmp "ko" with
"gz". Don't do this on those systems.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 3c8a67f50a ("perf tools: Add kmod_path__parse function")
Link: http://lkml.kernel.org/r/20170503131402.c66e314460026c80cd787b34@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More needs to be done to have the actual functions and variables in a
smaller .c file that can then be included in the python binding,
avoiding dragging more stuff into it.
Link: http://lkml.kernel.org/n/tip-uecxz7cqkssouj7tlxrkqpl4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it is going away from util.h, where it is not needed.
This is mostly for things like MAXPATHLEN, MAX() and MIN(), these later
two probably should go away in favor of its kernel sources replacements.
Link: http://lkml.kernel.org/n/tip-z1666f3fl3fqobxvjr5o2r39@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of util.h, to disentangle it a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vpksyj3w5fk9t8s6mxmkajyr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The files using the dirent.h routines should instead include it,
reducing the includes hell that lead to longer build times.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-42g2f4z6nfg7mdb2ae97n7tj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of getting it out of luck from util.h, where it isn't needed at
all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0bqugg5lc5ksla1v4m0dnmc1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disentangling util.h header mess a bit more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing it from util.h, part of an effort to disentangle the includes
hell, that makes changes to util.h or something included by it to cause
a complete rebuild of the tools.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztrjy52q1rqcchuy3rubfgt2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Continuing the split of util.[ch] into more manageable bits.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5eu367rwcwnvvn7fz09l7xpb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
More stuff that came from git, out of the hodge-podge that is util.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed to use the PRI[xu](32,64) formatting macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure that the string in buf is null terminated.
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170322130624.21881-4-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a simple expression parser good enough to parse JSON relation
expressions. The parser is implemented using bison.
This is just intended as an simple parser for internal usage in the
event lists, not the beginning of a "perf scripting language"
v2: Use expr__ prefix instead of expr_
Support multiple free variables for parser
Committer note:
The v2 patch had:
%define api.pure full
In expr.y, that is a feature introduced in bison 2.7, to have reentrant
parsers, not using global variables, which would make tools/perf stop
building with the bison version shipped in older distros, so Andi
realised that the other parsers (e.g. parse-events.y) were using:
%pure-parser
Which is present in older versions of bison and fits the bill.
I added:
CFLAGS_expr-bison.o += -DYYENABLE_NLS=0 -DYYLTYPE_IS_TRIVIAL=0 -w
To finally make it build, copying what was there for pmu-bison.o,
another parser.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170320201711.14142-8-andi@firstfloor.org
[ stdlib.h is needed in tests/expr.c for free() fixing build in systems such as ubuntu:16.04-x-s390 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-10-git-send-email-elena.reshetova@intel.com
[ Did missing tests/thread-map.c conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of
atomic_t when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-7-git-send-email-elena.reshetova@intel.com
[ Did the missing conversion of tests/thread-mg-share.c too ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The refcount_t type and corresponding API should be used instead of atomic_t
when the variable is used as a reference counter.
This allows to avoid accidental refcounter overflows that might lead to
use-after-free situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kees Kook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alsa-devel@alsa-project.org
Link: http://lkml.kernel.org/r/1487691303-31858-3-git-send-email-elena.reshetova@intel.com
[ fixed mixed conversion to refcount in tests/cpumap.c ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now can have negative value to suppress the message entirely. So it
needs to check it being positive.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are 2 problems wrt. cpu_topology_map on systems with sparse CPUs:
1. offline/absent CPUs will have their socket_id and core_id set to -1
which triggers:
"socket_id number is too big.You may need to upgrade the perf tool."
2. size of cpu_topology_map (perf_env.cpu[]) is allocated based on
_SC_NPROCESSORS_CONF, but can be indexed with CPU ids going above.
Users of perf_env.cpu[] are using CPU id as index. This can lead
to read beyond what was allocated:
==19991== Invalid read of size 4
==19991== at 0x490CEB: check_cpu_topology (topology.c:69)
==19991== by 0x490CEB: test_session_topology (topology.c:106)
...
For example:
_SC_NPROCESSORS_CONF == 16
available: 2 nodes (0-1)
node 0 cpus: 0 6 8 10 16 22 24 26
node 0 size: 12004 MB
node 0 free: 9470 MB
node 1 cpus: 1 7 9 11 23 25 27
node 1 size: 12093 MB
node 1 free: 9406 MB
node distances:
node 0 1
0: 10 20
1: 20 10
This patch changes HEADER_NRCPUS.nr_cpus_available from _SC_NPROCESSORS_CONF
to max_present_cpu and updates any user of cpu_topology_map to iterate
with nr_cpus_avail.
As a consequence HEADER_CPU_TOPOLOGY core_id and socket_id lists get longer,
but maintain compatibility with pre-patch state - index to cpu_topology_map is
CPU id.
perf test 36 -v
36: Session topology :
--- start ---
test child forked, pid 22211
templ file: /tmp/perf-test-gmdX5i
CPU 0, core 0, socket 0
CPU 1, core 0, socket 1
CPU 6, core 10, socket 0
CPU 7, core 10, socket 1
CPU 8, core 1, socket 0
CPU 9, core 1, socket 1
CPU 10, core 9, socket 0
CPU 11, core 9, socket 1
CPU 16, core 0, socket 0
CPU 22, core 10, socket 0
CPU 23, core 10, socket 1
CPU 24, core 1, socket 0
CPU 25, core 1, socket 1
CPU 26, core 9, socket 0
CPU 27, core 9, socket 1
test child finished with 0
---- end ----
Session topology: Ok
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/d7c05c6445fca74a8442c2c73cfffd349c52c44f.1487146877.git.jstancek@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
End result is the same, its an ABI, so the struct won't change, avoid
using a GNU extension, so that we can catch other cases that may be bugs.
Caught when building with clang:
tests/parse-no-sample-id-all.c:53:20: error: field 'attr' with variable sized type 'struct attr_event' not at the end of a struct or class is a GNU extension
[-Werror,-Wgnu-variable-sized-type-not-at-end]
struct attr_event attr;
^
1 error generated.
Testing it:
# perf test sample_id
24: Parse with no sample_id_all bit set : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-e2vs1x771fc208uvxnwcf08b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will always evaluate to 'true', as clang warns:
CC /tmp/build/perf/tests/perf-record.o
CC /tmp/build/perf/tests/evsel-roundtrip-name.o
tests/perf-record.c:69:24: error: comparison of array 'argv' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare]
if (evlist == NULL || argv == NULL) {
^~~~ ~~~~
1 error generated.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-o4977g6p9b3peak9ct6ef48q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Addressing a few cases spotted by a new warning in gcc 7:
tests/parse-events.c: In function 'test_pmu_events':
tests/parse-events.c:1790:39: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 90 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "cpu/event=%s/u", ent->d_name);
^~
In file included from /usr/include/stdio.h:939:0,
from /git/linux/tools/perf/util/map.h:9,
from /git/linux/tools/perf/util/symbol.h:7,
from /git/linux/tools/perf/util/evsel.h:10,
from tests/parse-events.c:3:
/usr/include/bits/stdio2.h:64:10: note: '__builtin___snprintf_chk' output between 13 and 268 bytes into a destination of size 100
return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
__bos (__s), __fmt, __va_arg_pack ());
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tests/parse-events.c:1798:29: error: '%s' directive output may be truncated writing up to 255 bytes into a region of size 100 [-Werror=format-truncation=]
snprintf(name, MAX_NAME, "%s:u,cpu/event=%s/u", ent->d_name, ent->d_name);
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 945aea220b ("perf tests: Move test objects into 'tests' directory")
Link: http://lkml.kernel.org/n/tip-ty4q2p8zp1dp3mskvubxskm5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function will turn a libbpf pointer into a standard error code (or
0 if the pointer is valid).
This also allows removal of the dependency on linux/err.h in the public
header file, which causes problems in userspace programs built against
libbpf.
Signed-off-by: Joe Stringer <joe@ovn.org>
Acked-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20170123011128.26534-5-joe@ovn.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add unit_number__scnprintf function to display size units and use it in
-m option info message.
Before:
$ perf record -m 10M ls
rounding mmap pages size to 16777216 bytes (4096 pages)
...
After:
$ perf record -m 10M ls
rounding mmap pages size to 16M (4096 pages)
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1483955520-29063-2-git-send-email-jolsa@kernel.org
[ Rename it to unit_number__scnprintf for consistency ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
Cleanup the fixdep tool before every test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
getBPFObjectFromModule() is introduced to compile LLVM IR(Module)
to BPF object. Add new testcase for it.
Test result:
$ ./buildperf/perf test -v clang
51: builtin clang support :
51.1: builtin clang compile C source to IR :
--- start ---
test child forked, pid 21822
test child finished with 0
---- end ----
builtin clang support subtest 0: Ok
51.2: builtin clang compile C source to ELF object :
--- start ---
test child forked, pid 21823
test child finished with 0
---- end ----
builtin clang support subtest 1: Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-15-wangnan0@huawei.com
[ Remove redundant "Test" from entry descriptions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow C++ code to use util.h and tests/llvm.h. Let 'perf test' compile a
real BPF script.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-14-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic clang support in clang.cpp and test__clang() testcase. The
first testcase checks if builtin clang is able to generate LLVM IR.
tests/clang.c is a proxy. Real testcase resides in
utils/c++/clang-test.cpp in c++ and exports C interface to perf test
subsystem.
Test result:
$ perf test -v clang
51: builtin clang support :
51.1: Test builtin clang compile C source to IR :
--- start ---
test child forked, pid 13215
test child finished with 0
---- end ----
Test builtin clang support subtest 0: Ok
Committer note:
Make sure you've enabled CLANG and LLVM builtin support by setting
the LIBCLANGLLVM variable on the make command line, e.g.:
make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
Otherwise you'll get this when trying to do the 'perf test' call above:
# perf test clang
51: builtin clang support : Skip (not compiled in)
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com
[ Removed "Test" from descriptions, redundant and already removed from all the other entries ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add necessary c++ flags and link libraries to support builtin clang and
LLVM. Add all llvm and clang libraries, so don't need to worry about
clang changes its libraries setting. However, linking perf would take
much longer than usual.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-10-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass a pointer to perf hook functions so they receive context
information during setup.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-6-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having "test" in almost all test descriptions is redundant, simplify it
removing and rewriting tests with such descriptions.
End result:
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: PERF_RECORD_* events & perf_sample fields : Ok
7: Parse perf pmu format : Ok
8: DSO data read : Ok
9: DSO data cache : Ok
10: DSO data reopen : Ok
11: Roundtrip evsel->name : Ok
12: Parse sched tracepoints fields : Ok
13: syscalls:sys_enter_openat event fields : Ok
14: Setup struct perf_event_attr : Ok
15: Match and link multiple hists : Ok
16: 'import perf' in python : Ok
17: Breakpoint overflow signal handler : Ok
18: Breakpoint overflow sampling : Ok
19: Number of exit events of a simple workload : Ok
20: Software clock events period values : Ok
21: Object code reading : Ok
22: Sample parsing : Ok
23: Use a dummy software event to keep tracking: Ok
24: Parse with no sample_id_all bit set : Ok
25: Filter hist entries : Ok
26: Lookup mmap thread : Ok
27: Share thread mg : Ok
28: Sort output of hist entries : Ok
29: Cumulate child hist entries : Ok
30: Track with sched_switch : Ok
31: Filter fds with revents mask in a fdarray : Ok
32: Add fd to a fdarray, making it autogrow : Ok
33: kmod_path__parse : Ok
34: Thread map : Ok
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: Ok
35.4: Compile source for BPF relocation : Ok
36: Session topology : Ok
37: BPF filter :
37.1: Basic BPF filtering : Ok
37.2: BPF prologue generation : Ok
37.3: BPF relocation checker : Ok
38: Synthesize thread map : Ok
39: Synthesize cpu map : Ok
40: Synthesize stat config : Ok
41: Synthesize stat : Ok
42: Synthesize stat round : Ok
43: Synthesize attr update : Ok
44: Event times : Ok
45: Read backward ring buffer : Ok
46: Print cpu map : Ok
47: Probe SDT events : Ok
48: is_printable_array : Ok
49: Print bitmap : Ok
50: perf hooks : Ok
51: x86 rdpmc : Ok
52: Convert perf time to TSC : Ok
53: DWARF unwind : Ok
54: x86 instruction decoder - new instructions : Ok
55: Intel cqm nmi context read : Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf hooks allow hooking user code at perf events. They can be used for
manipulation of BPF maps, taking snapshot and reporting results. In this
patch two perf hook points are introduced: record_start and record_end.
To avoid buggy user actions, a SIGSEGV signal handler is introduced into
'perf record'. It turns off perf hook if it causes a segfault and report
an error to help debugging.
A test case for perf hook is introduced.
Test result:
$ ./buildperf/perf test -v hook
50: Test perf hooks :
--- start ---
test child forked, pid 10311
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
Test perf hooks: Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-5-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compile jvmti agent as part of the perf build. The agent library is
called libperf-jvmti.so and is installed in default place together with
other files:
$ make libperf-jvmti.so
BUILD: Doing 'make -j4' parallel build
...
CC jvmti/libjvmti.o
CC jvmti/jvmti_agent.o
LD jvmti/jvmti-in.o
LINK libperf-jvmti.so
$ make DESTDIR=/tmp/krava/ install-bin
...
$ find /tmp/krava/ | grep libperf
/tmp/krava/lib64/libperf-jvmti.so
/tmp/krava/lib64/libperf-gtk.so
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The latter version occurs much more when running git grep.
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161013161811.4939-1-alexander@alemayhu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The user stack dump feature was recently added for powerpc. But there
was no test case available to test it.
This test works same as on other architectures by preparing a stack
frame on the perf test thread and comparing each frame by unwinding it.
$ ./perf test 50
50: Test dwarf unwind : Ok
User stack dump for powerpc: https://lkml.org/lkml/2016/4/28/482
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1474267100-31079-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're not using it anymore, few users were, but we really could do
without it, simplify lots of functions by removing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need to initialize that area as we're not using it afterwards,
leftover, ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-jb2un8buy4rqawz73mcdm1sn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The algorithms used to prune aliases in symbols__fixup_duplicate() uses
information available on ELF symtabs that are not present on
/proc/kallsyms, so it picks different aliases as "best" for vmlinux and
kallsyms.
We could probably improve a bit this by having a list of aliases for the
"best" symbols picked, instead of throwing this info, but that is left
for when we find a real need.
With this, 'perf test vmlinux' passes:
# perf test -F 1
1: vmlinux symtab matches kallsyms: Ok
#
When we ask for verbose mode, we can see those warning:
# perf test -F -v 1
1: vmlinux symtab matches kallsyms:
--- start ---
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.8.0-rc4+/build/vmlinux for symbols
WARN: 0xffffffffb7001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page
WARN: 0xffffffffb7077970: diff end addr for aesni_gcm_dec v: 0xffffffffb707a2f2 k: 0xffffffffb7077a02
WARN: 0xffffffffb707a300: diff end addr for aesni_gcm_enc v: 0xffffffffb707cc03 k: 0xffffffffb707a392
WARN: 0xffffffffb707f950: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffffb7084ef6 k: 0xffffffffb707f9c3
WARN: 0xffffffffb7084f00: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffffb708a691 k: 0xffffffffb7084f73
WARN: 0xffffffffb708aa10: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffffb708f844 k: 0xffffffffb708aa83
WARN: 0xffffffffb708f850: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffffb709486f k: 0xffffffffb708f8c3
WARN: 0xffffffffb71a6e50: diff name v: perf_pmu_commit_txn.part.98 k: perf_pmu_cancel_txn.part.97
WARN: 0xffffffffb752e480: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7
WARN: 0xffffffffb76e8d00: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12
WARN: Maps only in vmlinux:
ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text
ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text
---- end ----
vmlinux symtab matches kallsyms: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6v5w1k8rpx4ggczlkw730vt0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test -F -v 1
1: vmlinux symtab matches kallsyms:
--- start ---
<SNIP>
WARN: Maps only in vmlinux:
ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text
ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text
WARN: Maps in vmlinux with a different name in kallsyms:
WARN: Maps only in kallsyms:
---- end ----
vmlinux symtab matches kallsyms: Ok
#
The two last WARN lines are now suppressed, since there are no such
cases detected.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-9ww8uvzl682ykaw8ht1tozlr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the 'perf test -v vmlinux' test fails, it is not clear which of the
lines are errors or warnings, clarify that adding ERR/WARN prefixes:
# perf test -F -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.8.0-rc4+/build/vmlinux for symbols
ERR : 0xffffffffb7001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page
WARN: 0xffffffffb7077970: diff end addr for aesni_gcm_dec v: 0xffffffffb707a2f2 k: 0xffffffffb7077a02
WARN: 0xffffffffb707a300: diff end addr for aesni_gcm_enc v: 0xffffffffb707cc03 k: 0xffffffffb707a392
WARN: 0xffffffffb707f950: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffffb7084ef6 k: 0xffffffffb707f9c3
WARN: 0xffffffffb7084f00: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffffb708a691 k: 0xffffffffb7084f73
WARN: 0xffffffffb708aa10: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffffb708f844 k: 0xffffffffb708aa83
WARN: 0xffffffffb708f850: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffffb709486f k: 0xffffffffb708f8c3
ERR : 0xffffffffb71a6e50: diff name v: perf_pmu_commit_txn.part.98 k: perf_pmu_cancel_txn.part.97
ERR : 0xffffffffb752e480: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7
ERR : 0xffffffffb76e8d00: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12
WARN: Maps only in vmlinux:
ffffffffb7d7d000-ffffffffb7eeaac8 117d000 [kernel].init.text
ffffffffb7eeaac8-ffffffffc03ad000 12eaac8 [kernel].exit.text
WARN: Maps in vmlinux with a different name in kallsyms:
WARN: Maps only in kallsyms:
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-n5ml8m7y9x8kzvxt09ipku88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trivial typo fix in pr_debug message
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160821141603.7832-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trivial typo fix in pr_debug message
Signed-off-by: Colin King <colin.king@canonical.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160821141256.7530-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Something made the sys_epoll_wait() function alias not to be found in
the vmlinux DWARF info, being found only in /proc/kallsyms, which made
the BPF perf tests to fail:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : FAILED!
37.2: Test BPF prologue generation : Skip
37.3: Test BPF relocation checker : Skip
[root@jouet ~]#
Using -v we can see it is failing to find DWARF info for the probed function,
sys_epoll_wait, which we can find in /proc/kallsyms but not in vmlinux with
CONFIG_DEBUG_INFO:
[root@jouet ~]# grep -w sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
[root@jouet ~]# readelf -wi /lib/modules/4.7.0+/build/vmlinux | grep -w sys_epoll_wait
[root@jouet ~]#
If we try to use perf probe:
[root@jouet ~]# perf probe sys_epoll_wait
Failed to find debug information for address ffffffffbd295b50
Probe point 'sys_epoll_wait' not found.
Error: Failed to add events.
[root@jouet ~]#
It all works if we use SyS_epoll_wait, that is just an alias to the probed
function:
[root@jouet ~]# grep -i sys_epoll_wait /proc/kallsyms
ffffffffbd295b50 T SyS_epoll_wait
ffffffffbd295b50 T sys_epoll_wait
[root@jouet ~]#
So use it:
[root@jouet ~]# perf test BPF
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : Ok
37.3: Test BPF relocation checker : Ok
[root@jouet ~]#
Further info:
[root@jouet ~]# gcc --version
gcc (GCC) 6.1.1 20160621 (Red Hat 6.1.1-3)
[acme@jouet linux]$ cat /etc/fedora-release
Fedora release 24 (Twenty Four)
Investigation as to why it fails is still underway, but it was always
going from sys_epoll_wait to SyS_epoll_wait when looking up the DWARF
info in vmlinux, and this is what is breaking now.
Switching to use SyS_epoll_wait allows this test to proceed and test the
BPF code it was designed for, so lets have this in to allow passing this
test while we fix the root cause.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7hekjp0bodwjbb419sl2b55h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
objdump's raw insn output can vary across architectures on the number of
bytes per chunk (bpc) displayed and their endianness.
The code-reading test relied on reading objdump output as 1 bpc. Kaixu
Xia reported test failure on ARM64, where objdump displays 4 bpc:
70c48: f90027bf str xzr, [x29,#72]
70c4c: 91224000 add x0, x0, #0x890
70c50: f90023a0 str x0, [x29,#64]
This patch adds support to read raw insn output for any bpc length.
In case of 2+ bpc it also guesses objdump's display endian.
Reported-and-Tested-by: Kaixu Xia <xiakaixu@huawei.com>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/07f0f7bcbda78deb423298708ef9b6a54d6b92bd.1452592712.git.jstancek@redhat.com
[ Fix up pr_fmt() call to use %zd for size_t variables, fixing the build on Ubuntu cross-compiling to armhf and ppc64 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Automatically test the bitmap_scnprintf function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1470074555-24889-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cross building it on Ubuntu 16.04 to ARM ends up showing we get
the free() prototype by luck in other environments, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-0ktfgmmyhcfw8ondka2013f3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add automated test for is_printable_array function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1468685480-18951-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch allows following config terms and option:
Globally setting events to overwrite;
# perf record --overwrite ...
Set specific events to be overwrite or no-overwrite.
# perf record --event cycles/overwrite/ ...
# perf record --event cycles/no-overwrite/ ...
Add missing config terms and update the config term array size because
the longest string length has changed.
For overwritable events, it automatically selects attr.write_backward
since perf requires it to be backward for reading.
Test result:
# perf record --overwrite -e syscalls:*enter_nanosleep* usleep 1
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ]
# perf evlist -v
syscalls:sys_enter_nanosleep: type: 2, size: 112, config: 0x134, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, write_backward: 1
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-14-git-send-email-wangnan0@huawei.com
Signed-off-by: He Kuang <hekuang@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now there's no real user of evlist->backward. Drop it. We are going to
use evlist->backward_mmap as a container for backward ring buffer.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
evsel->overwrite indicator means an event should be put into
overwritable ring buffer. In current implementation, it equals to
evsel->attr.write_backward. To reduce compliexity, remove
evsel->overwrite, use evsel->attr.write_backward instead.
In addition, in __perf_evsel__open(), if kernel doesn't support
write_backward and user explicitly set it in evsel, don't fallback
like other missing feature, since it is meaningless to fall back to
a forward ring buffer in this case: we are unable to stably read
from an forward overwritable ring buffer.
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1468485287-33422-2-git-send-email-wangnan0@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a basic test case for SDT event support. This test scans an SDT
event in perftools and check whether the SDT event is correctly stored
into the buildid cache.
Here is an example:
----
$ perf test sdt -v
47: Test SDT event probing :
--- start ---
test child forked, pid 20732
Found 72 SDTs in /home/mhiramat/ksrc/linux/tools/perf/perf
Writing cache: %sdt_perf:test_target=test_target
Cache committed: 0
symbol:test_target file:(null) line:0 offset:0 return:0 lazy:(null)
test child finished with 0
---- end ----
Test SDT event probing: Ok
----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831796546.17065.1502584370844087537.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This checks whether sys/sdt.h is available or not, which is required for
DTRACE_PROBE().
We can disable this feature by passing NO_SDT=1 when building.
This flag will be used for SDT test case and further SDT events in
perftools.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/146831795615.17065.17513820540591053933.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The prototype for epoll_wait() is available in older distros, so use it
instead of epoll_pwait() (removing the last NULL arg, the sigmask,
makes it the same thing anyway) to avoid breaking the build.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-pwiwizloxt0jujy8em80qut3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cache.h header doesn't use any of the definitions in some of the
headers it includes, ditch them and fix the fallout, where files were
getting stuff they needed just because they were including it, sometimes
not using what it really exports at all.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l6r2bmj8h1g3e01wr981on0n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It uses poll() but was getting the needed header by chance, do it
explicitely.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-76b3c5imnl6p69j4lqewzu9l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was getting all sort of needed stuff by sheer luck, via indirect
includes, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-tvjgo39t8k0ye6dntv3knran@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These were only defined if _GNU_SOURCE was set in older glibc versions,
check that and provide the defines in such cases.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-b8esouhpg4tk6vi4n3d7ipch@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dfcynqzvecsu55zmpxub9jgv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tools so far have been using the strerror_r() GNU variant, that
returns a string, be it the buffer passed or something else.
But that, besides being tricky in cases where we expect that the
function using strerror_r() returns the error formatted in a provided
buffer (we have to check if it returned something else and copy that
instead), breaks the build on systems not using glibc, like Alpine
Linux, where musl libc is used.
So, introduce yet another wrapper, str_error_r(), that has the GNU
interface, but uses the portable XSI variant of strerror_r(), so that
users rest asured that the provided buffer is used and it is what is
returned.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d4t42fnf48ytlk8rjxs822tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User's values from .perfconfig could overload the default callchain
setup and cause this test to fail. Making sure the test is using
default callchain_param values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467634583-29147-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding -F/--dont-fork option to bypass forking for each test. It's
useful for debugging test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I hit a bug when running test suite without forking each test (-F
option):
$ perf test -Fv
...
34: Test thread map :
--- start ---
FAILED tests/thread-map.c:24 wrong comm
---- end ----
Test thread map: FAILED!
The reason was the process name wasn't 'perf' as expected by the test,
because other tests set the name as well.
Setting it explicitly now.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I hit a bug when running test suite without forking
each test (-F option):
$ perf test -F dso
8: Test dso data read : Ok
9: Test dso data cache : FAILED!
10: Test dso data reopen : FAILED!
The reason the session file limit is set just once for
perf process so we need to reset it for each test,
otherwise wrong limit is taken into account.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nilay Vaish <nilayvaish@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1467113345-12669-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'make build-test' doesn't test LIBBABELTRACE=1. It misses a building
failure caused by commit 41840d211c ("perf config: Move config
declarations from util/cache.h to util/config.h"), breaks bisect.
Add LIBBABELTRACE=1 to build-test.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1466818918-131281-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the semantics for list.h in the kernel, that are used to
implement those macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qbcjlgj0ffxquxscahbpddi3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And do nothing, just like free(), to avoid having to test it in callers,
usually in error paths.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-mexbavy0ft387j5w89t365eu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no reason we should suffer the '__' prefix for the base global
function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1465928361-2442-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
User visible:
- Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)
- Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)
- Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)
Build fixes:
- Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)
Infrastructure:
- Fix perf_evlist__alloc_mmap() failure path (Wang Nan)
- Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=60TB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20160606' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Tooling support for TopDown counters, recently added to the kernel (Andi Kleen)
- Show call graphs in 'perf script' when 1st event doesn't have it but some other has (He Kuang)
- Fix terminal cleanup when handling invalid .perfconfig files in 'perf top' (Taeung Song)
Build fixes:
- Respect CROSS_COMPILE for the linker in libapi (Lucas Stach)
Infrastructure changes:
- Fix perf_evlist__alloc_mmap() failure path (Wang Nan)
- Provide way to extract integer value from format_field (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
'perf test' tries to parse all entries in /sys/devices/cpu/events/.
Ignore the special entries like '.scale', which cannot be directly
parsed as an event. This patch assumes all files containing a '.' are
special and can be ignored.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1465223766-29902-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch there's no way to pass arguments to fdarray__filter's
call back function.
This improvement will be used by 'perf record' to support unmapping ring
buffer for both main evlist and overwrite evlist. Without this patch
there's no way to track overwrite evlist from 'struct fdarray'.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-10-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test checks reading from backward ring buffer.
Test result:
# ~/perf test 'ring buffer'
45: Test backward reading from ring buffer : Ok
The test case is a while loop which calls prctl(PR_SET_NAME) multiple
times. Each prctl should issue 2 events: one PERF_RECORD_SAMPLE, one
PERF_RECORD_COMM.
The first round creates a relative large ring buffer (256 pages). It can
afford all events. Read from it and check the count of each type of
events.
The second round creates a small ring buffer (1 page) and makes it
overwritable. Check the correctness of the buffer.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1462758471-89706-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now we have sort dimensions private for struct hists, we need to make
dimension booleans hists specific as well.
Moving sort__need_collapse into struct perf_hpp_list.
Adding hists__has macro to easily access this info perf struct hists
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1462276488-26683-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using sizeof on a malloced pointer type will return the wordsize which
can often cause one to allocate a buffer much smaller than it is needed.
So, here do not use sizeof on pointer type.
Note that this has no effect on runtime because 'dsos' is a pointer to a
pointer.
Problem found using Coccinelle.
Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461862017-23358-1-git-send-email-vaishali.thakkar@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is an upper limit to what tooling considers a valid callchain,
and it was tied to the hardcoded value in the kernel,
PERF_MAX_STACK_DEPTH (127), now that this can be tuned via a sysctl,
make it read it and use that as the upper limit, falling back to
PERF_MAX_STACK_DEPTH for kernels where this sysctl isn't present.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yjqsd30nnkogvj5oyx9ghir9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current assert check is checking an assignment, which will always be
true. Instead, the assert should be checking if scale is equal to 0.122
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1461419154-16918-1-git-send-email-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
One of the branches leading to an error had no debug message emitted,
fix it, the new lines are:
# perf test -v kallsyms
<SNIP>
0xffffffff81001000: diff name v: xen_hypercall_set_trap_table k: hypercall_page
0xffffffff810691f0: diff name v: try_to_free_pud_page k: try_to_free_pmd_page
<SNIP>
0xffffffff8150bb20: diff name v: wakeup_expire_count_show.part.5 k: wakeup_active_count_show.part.7
0xffffffff816bc7f0: diff name v: phys_switch_id_show.part.11 k: phys_port_name_show.part.12
0xffffffff817bbb90: diff name v: __do_softirq k: __softirqentry_text_start
<SNIP>
This in turn exercises another bug, still under investigation, because those
aliases _are_ in kallsyms, with the same name...
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ab414dcda8 ("perf test: Fixup aliases checking in the 'vmlinux matches kallsyms' test")
Link: http://lkml.kernel.org/n/tip-5fhea7a54a54gsmagu9obpr4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf test -v kallsyms
<SNIP>
Maps only in vmlinux:
ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text
ffffffffa0000000-ffffffffa000c000 0 [fjes]
ffffffffa000c000-ffffffffa0017000 0 [video]
ffffffffa0017000-ffffffffa001c000 0 [grace]
<SNIP>
ffffffffa0a7f000-ffffffffa0ba5000 0 [xfs]
ffffffffa0ba5000-ffffffffffffffff 0 [veth]
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
ffff880000100000-ffff88001000b000 80000103000 [kernel.kallsyms]
ffff88001000b000-ffff880100000000 8001000e000 [kernel.kallsyms]
ffff880100000000-ffffc90000000000 80100003000 [kernel.kallsyms]
<SNIP>
ffffffffa0000000-ffffffffff600000 7fffa0003000 [kernel.kallsyms]
ffffffffff600000-ffffffffffffffff 7fffff603000 [kernel.kallsyms]
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
After:
# perf test -v 1
1: vmlinux symtab matches kallsyms :
--- start ---
test child forked, pid 7058
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.6.0-rc1+/build/vmlinux for symbols
0xffffffff81076870: diff end addr for aesni_gcm_dec v: 0xffffffff810791f2 k: 0xffffffff81076902
0xffffffff81079200: diff end addr for aesni_gcm_enc v: 0xffffffff8107bb03 k: 0xffffffff81079292
0xffffffff8107e8d0: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffff81083e76 k: 0xffffffff8107e943
0xffffffff81083e80: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffff81089611 k: 0xffffffff81083ef3
0xffffffff81089990: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffff8108e7c4 k: 0xffffffff81089a03
0xffffffff8108e7d0: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffff810937ef k: 0xffffffff8108e843
Maps only in vmlinux:
ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text
ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text
Maps in vmlinux with a different name in kallsyms:
Maps only in kallsyms:
test child finished with -1
---- end ----
vmlinux symtab matches kallsyms: FAILED!
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 8e0cf965f9 ("perf symbols: Add support for reading from /proc/kcore")
Link: http://lkml.kernel.org/n/tip-n6vrwt9t89w8k769y349govx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Seonghyun Park
Ingo Molnar
Greg Kroah-Hartman
Jiri Olsa
Li Zhijian
Jiri Olsa
Kan Liang
Thomas Richter
Arnaldo Carvalho de Melo
Milian Wolff
Ravi Bangoria
Andi Kleen
Kim Phillips
Wang Nan
Krister Johansen
Jiada Wang
Namhyung Kim
Tommi Rantala
Elena Reshetova
Jan Stancek
Joe Stringer
Linus Torvalds
Uwe Kleine-König
Alexander Alemayhu
Colin Ian King
Masami Hiramatsu
Vaishali Thakkar