Make it possible to disable the block layer. Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.
This patch does the following:
(*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
support.
(*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
an item that uses the block layer. This includes:
(*) Block I/O tracing.
(*) Disk partition code.
(*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.
(*) The SCSI layer. As far as I can tell, even SCSI chardevs use the
block layer to do scheduling. Some drivers that use SCSI facilities -
such as USB storage - end up disabled indirectly from this.
(*) Various block-based device drivers, such as IDE and the old CDROM
drivers.
(*) MTD blockdev handling and FTL.
(*) JFFS - which uses set_bdev_super(), something it could avoid doing by
taking a leaf out of JFFS2's book.
(*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is,
however, still used in places, and so is still available.
(*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
parts of linux/fs.h.
(*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.
(*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.
(*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
is not enabled.
(*) fs/no-block.c is created to hold out-of-line stubs and things that are
required when CONFIG_BLOCK is not set:
(*) Default blockdev file operations (to give error ENODEV on opening).
(*) Makes some /proc changes:
(*) /proc/devices does not list any blockdevs.
(*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.
(*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.
(*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
given command other than Q_SYNC or if a special device is specified.
(*) In init/do_mounts.c, no reference is made to the blockdev routines if
CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2.
(*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
error ENOSYS by way of cond_syscall if so).
(*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
CONFIG_BLOCK is not set, since they can't then happen.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The patches solve the following problem: We want to grant access to devices
based on who is logged in from where, etc. This includes switching back and
forth between multiple user sessions, etc.
Using ACLs to define device access for logged-in users gives us all the
flexibility we need in order to fully solve the problem.
Device special files nowadays usually live on tmpfs, hence tmpfs ACLs.
Different distros have come up with solutions that solve the problem to
different degrees: SUSE uses a resource manager which tracks login sessions
and sets ACLs on device inodes as appropriate. RedHat uses pam_console, which
changes the primary file ownership to the logged-in user. Others use a set of
groups that users must be in in order to be granted the appropriate accesses.
The freedesktop.org project plans to implement a combination of a
console-tracker and a HAL-device-list based solution to grant access to
devices to users, and more distros will likely follow this approach.
These patches have first been posted here on 2 February 2005, and again
on 8 January 2006. We have been shipping them in SLES9 and SLES10 with
no problems reported. The previous submission is archived here:
http://lkml.org/lkml/2006/1/8/229http://lkml.org/lkml/2006/1/8/230http://lkml.org/lkml/2006/1/8/231
This patch:
Add some infrastructure for access control lists on in-memory
filesystems such as tmpfs.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is the first patch in a series of patches that removes devfs
support from the kernel. This patch removes the core devfs code, and
its private header file.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The following series of patches introduces a kernel API for inotify,
making it possible for kernel modules to benefit from inotify's
mechanism for watching inodes. With these patches, inotify will
maintain for each caller a list of watches (via an embedded struct
inotify_watch), where each inotify_watch is associated with a
corresponding struct inode. The caller registers an event handler and
specifies for which filesystem events their event handler should be
called per inotify_watch.
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Acked-by: Robert Love <rml@novell.com>
Acked-by: John McCutchan <john@johnmccutchan.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
configfs_init() needs to be called first to register configfs before anyconsumers try to access it. Move up configfs in fs/Makefile to make
sure it is initialized early.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Remove the recently-added LINUX_FADV_ASYNC_WRITE and LINUX_FADV_WRITE_WAIT
fadvise() additions, do it in a new sys_sync_file_range() syscall instead.
Reasons:
- It's more flexible. Things which would require two or three syscalls with
fadvise() can be done in a single syscall.
- Using fadvise() in this manner is something not covered by POSIX.
The patch wires up the syscall for x86.
The sycall is implemented in the new fs/sync.c. The intention is that we can
move sys_fsync(), sys_fdatasync() and perhaps sys_sync() into there later.
Documentation for the syscall is in fs/sync.c.
A test app (sync_file_range.c) is in
http://www.zip.com.au/~akpm/linux/patches/stuff/ext3-tools.tar.gz.
The available-to-GPL-modules do_sync_file_range() is for knfsd: "A COMMIT can
say NFS_DATA_SYNC or NFS_FILE_SYNC. I can skip the ->fsync call for
NFS_DATA_SYNC which is hopefully the more common."
Note: the `async' writeout mode SYNC_FILE_RANGE_WRITE will turn synchronous if
the queue is congested. This is trivial to fix: add a new flag bit, set
wbc->nonblocking. But I'm not sure that we want to expose implementation
details down to that level.
Note: it's notable that we can sync an fd which wasn't opened for writing.
Same with fsync() and fdatasync()).
Note: the code takes some care to handle attempts to sync file contents
outside the 16TB offset on 32-bit machines. It makes such attempts appear to
succeed, for best 32-bit/64-bit compatibility. Perhaps it should make such
requests fail...
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds support for the sys_splice system call. Using a pipe as a
transport, it can connect to files or sockets (latter as output only).
From the splice.c comments:
"splice": joining two ropes together by interweaving their strands.
This is the "extended pipe" functionality, where a pipe is used as
an arbitrary in-memory buffer. Think of a pipe as a small kernel
buffer that you can use to transfer data from one end to the other.
The traditional unix read/write is extended with a "splice()" operation
that transfers data buffers to or from a pipe buffer.
Named by Larry McVoy, original implementation from Linus, extended by
Jens to support splicing to files and fixing the initial implementation
bugs.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Now that all these entries in the arch ioctl32.c files are gone [1], we can
build fs/compat_ioctl.c as a normal object and kill tons of cruft. We need a
special do_ioctl32_pointer handler for s390 so the compat_ptr call is done.
This is not needed but harmless on all other architectures. Also remove some
superflous includes in fs/compat_ioctl.c
Tested on ppc64.
[1] parisc still had it's PPP handler left, which is not fully correct
for ppp and besides that ppp uses the generic SIOCPRIV ioctl so it'd
kick in for all netdevice users. We can introduce a proper handler
in one of the next patch series by adding a compat_ioctl method to
struct net_device but for now let's just kill it - parisc doesn't
compile in mainline anyway and I don't want this to block this
patchset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add /proc/sys/vm/drop_caches. When written to, this will cause the kernel to
discard as much pagecache and/or reclaimable slab objects as it can. THis
operation requires root permissions.
It won't drop dirty data, so the user should run `sync' first.
Caveats:
a) Holds inode_lock for exorbitant amounts of time.
b) Needs to be taught about NUMA nodes: propagate these all the way through
so the discarding can be controlled on a per-node basis.
This is a debugging feature: useful for getting consistent results between
filesystem benchmarks. We could possibly put it under a config option, but
it's less than 300 bytes.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Link the code into the kernel build system. OCFS2 is marked as
experimental.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
Configfs, a file system for userspace-driven kernel object configuration.
The OCFS2 stack makes extensive use of this for propagation of cluster
configuration information into kernel.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
A private mount does not forward or receive propagation. This patch
provides user the ability to convert any mount to private.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OVERVIEW
V9FS is a distributed file system for Linux which provides an
implementation of the Plan 9 resource sharing protocol 9P. It can be
used to share all sorts of resources: static files, synthetic file servers
(such as /proc or /sys), devices, and application file servers (such as
FUSE).
BACKGROUND
Plan 9 (http://plan9.bell-labs.com/plan9) is a research operating
system and associated applications suite developed by the Computing
Science Research Center of AT&T Bell Laboratories (now a part of
Lucent Technologies), the same group that developed UNIX , C, and C++.
Plan 9 was initially released in 1993 to universities, and then made
generally available in 1995. Its core operating systems code laid the
foundation for the Inferno Operating System released as a product by
Lucent Bell-Labs in 1997. The Inferno venture was the only commercial
embodiment of Plan 9 and is currently maintained as a product by Vita
Nuova (http://www.vitanuova.com). After updated releases in 2000 and
2002, Plan 9 was open-sourced under the OSI approved Lucent Public
License in 2003.
The Plan 9 project was started by Ken Thompson and Rob Pike in 1985.
Their intent was to explore potential solutions to some of the
shortcomings of UNIX in the face of the widespread use of high-speed
networks to connect machines. In UNIX, networking was an afterthought
and UNIX clusters became little more than a network of stand-alone
systems. Plan 9 was designed from first principles as a seamless
distributed system with integrated secure network resource sharing.
Applications and services were architected in such a way as to allow
for implicit distribution across a cluster of systems. Configuring an
environment to use remote application components or services in place
of their local equivalent could be achieved with a few simple command
line instructions. For the most part, application implementations
operated independent of the location of their actual resources.
Commercial operating systems haven't changed much in the 20 years
since Plan 9 was conceived. Network and distributed systems support is
provided by a patchwork of middle-ware, with an endless number of
packages supplying pieces of the puzzle. Matters are complicated by
the use of different complicated protocols for individual services,
and separate implementations for kernel and application resources.
The V9FS project (http://v9fs.sourceforge.net) is an attempt to bring
Plan 9's unified approach to resource sharing to Linux and other
operating systems via support for the 9P2000 resource sharing
protocol.
V9FS HISTORY
V9FS was originally developed by Ron Minnich and Maya Gokhale at Los
Alamos National Labs (LANL) in 1997. In November of 2001, Greg Watson
setup a SourceForge project as a public repository for the code which
supported the Linux 2.4 kernel.
About a year ago, I picked up the initial attempt Ron Minnich had
made to provide 2.6 support and got the code integrated into a 2.6.5
kernel. I then went through a line-for-line re-write attempting to
clean-up the code while more closely following the Linux Kernel style
guidelines. I co-authored a paper with Ron Minnich on the V9FS Linux
support including performance comparisons to NFSv3 using Bonnie and
PostMark - this paper appeared at the USENIX/FREENIX 2005
conference in April 2005:
( http://www.usenix.org/events/usenix05/tech/freenix/hensbergen.html ).
CALL FOR PARTICIPATION/REQUEST FOR COMMENTS
Our 2.6 kernel support is stabilizing and we'd like to begin pursuing
its integration into the official kernel tree. We would appreciate any
review, comments, critiques, and additions from this community and are
actively seeking people to join our project and help us produce
something that would be acceptable and useful to the Linux community.
STATUS
The code is reasonably stable, although there are no doubt corner cases
our regression tests haven't discovered yet. It is in regular use by several
of the developers and has been tested on x86 and PowerPC
(32-bit and 64-bit) in both small and large (LANL cluster) deployments.
Our current regression tests include fsx, bonnie, and postmark.
It was our intention to keep things as simple as possible for this
release -- trying to focus on correctness within the core of the
protocol support versus a rich set of features. For example: a more
complete security model and cache layer are in the road map, but
excluded from this release. Additionally, we have removed support for
mmap operations at Al Viro's request.
PERFORMANCE
Detailed performance numbers and analysis are included in the FREENIX
paper, but we show comparable performance to NFSv3 for large file
operations based on the Bonnie benchmark, and superior performance for
many small file operations based on the PostMark benchmark. Somewhat
preliminary graphs (from the FREENIX paper) are available
(http://v9fs.sourceforge.net/perf/index.html).
RESOURCES
The source code is available in a few different forms:
tarballs: http://v9fs.sf.net
CVSweb: http://cvs.sourceforge.net/viewcvs.py/v9fs/linux-9p/
CVS: :pserver:anonymous@cvs.sourceforge.net:/cvsroot/v9fs/linux-9p
Git: rsync://v9fs.graverobber.org/v9fs (webgit: http://v9fs.graverobber.org)
9P: tcp!v9fs.graverobber.org!6564
The user-level server is available from either the Plan 9 distribution
or from http://v9fs.sf.net
Other support applications are still being developed, but preliminary
version can be downloaded from sourceforge.
Documentation on the protocol has historically been the Plan 9 Man
pages (http://plan9.bell-labs.com/sys/man/5/INDEX.html), but there is
an effort under way to write a more complete Internet-Draft style
specification (http://v9fs.sf.net/rfc).
There are a couple of mailing lists supporting v9fs, but the most used
is v9fs-developer@lists.sourceforge.net -- please direct/cc your
comments there so the other v9fs contibutors can participate in the
conversation. There is also an IRC channel: irc://freenode.net/#v9fs
This part of the patch contains Documentation, Makefiles, and configuration
file changes.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here's the latest version of relayfs, against linux-2.6.11-mm2. I'm hoping
you'll consider putting this version back into your tree - the previous
rounds of comment seem to have shaken out all the API issues and the number
of comments on the code itself have also steadily dwindled.
This patch is essentially the same as the relayfs redux part 5 patch, with
some minor changes based on reviewer comments. Thanks again to Pekka
Enberg for those. The patch size without documentation is now a little
smaller at just over 40k. Here's a detailed list of the changes:
- removed the attribute_flags in relay open and changed it to a
boolean specifying either overwrite or no-overwrite mode, and removed
everything referencing the attribute flags.
- added a check for NULL names in relayfs_create_entry()
- got rid of the unnecessary multiple labels in relay_create_buf()
- some minor simplification of relay_alloc_buf() which got rid of a
couple params
- updated the Documentation
In addition, this version (through code contained in the relay-apps tarball
linked to below, not as part of the relayfs patch) tries to make it as easy
as possible to create the cooperating kernel/user pieces of a typical and
common type of logging application, one where kernel logging is kicked off
when a user space data collection app starts and stops when the collection
app exits, with the data being automatically logged to disk in between. To
create this type of application, you basically just include a header file
(relay-app.h, included in the relay-apps tarball) in your kernel module,
define a couple of callbacks and call an initialization function, and on
the user side call a single function that sets up and continuously monitors
the buffers, and writes data to files as it becomes available. Channels
are created when the collection app is started and destroyed when it exits,
not when the kernel module is inserted, so different channel buffer sizes
can be specified for each separate run via command-line options. See the
README in the relay-apps tarball for details.
Also included in the relay-apps tarball are a couple examples
demonstrating how you can use this to create quick and dirty kernel
logging/debugging applications. They are:
- tprintk, short for 'tee printk', which temporarily puts a kprobe on
printk() and writes a duplicate stream of printk output to a relayfs
channel. This could be used anywhere there's printk() debugging code
in the kernel which you'd like to exercise, but would rather not have
your system logs cluttered with debugging junk. You'd probably want
to kill klogd while you do this, otherwise there wouldn't be much
point (since putting a kprobe on printk() doesn't change the output
of printk()). I've used this method to temporarily divert the packet
logging output of the iptables LOG target from the system logs to
relayfs files instead, for instance.
- klog, which just provides a printk-like formatted logging function
on top of relayfs. Again, you can use this to keep stuff out of your
system logs if used in place of printk.
The example applications can be found here:
http://prdownloads.sourceforge.net/dprobes/relay-apps.tar.gz?download
From: Christoph Hellwig <hch@lst.de>
avoid lookup_hash usage in relayfs
Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
inotify is intended to correct the deficiencies of dnotify, particularly
its inability to scale and its terrible user interface:
* dnotify requires the opening of one fd per each directory
that you intend to watch. This quickly results in too many
open files and pins removable media, preventing unmount.
* dnotify is directory-based. You only learn about changes to
directories. Sure, a change to a file in a directory affects
the directory, but you are then forced to keep a cache of
stat structures.
* dnotify's interface to user-space is awful. Signals?
inotify provides a more usable, simple, powerful solution to file change
notification:
* inotify's interface is a system call that returns a fd, not SIGIO.
You get a single fd, which is select()-able.
* inotify has an event that says "the filesystem that the item
you were watching is on was unmounted."
* inotify can watch directories or files.
Inotify is currently used by Beagle (a desktop search infrastructure),
Gamin (a FAM replacement), and other projects.
See Documentation/filesystems/inotify.txt.
Signed-off-by: Robert Love <rml@novell.com>
Cc: John McCutchan <ttb@tentacle.dhs.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This updates the CFQ io scheduler to the new time sliced design (cfq
v3). It provides full process fairness, while giving excellent
aggregate system throughput even for many competing processes. It
supports io priorities, either inherited from the cpu nice value or set
directly with the ioprio_get/set syscalls. The latter closely mimic
set/getpriority.
This import is based on my latest from -mm.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds functions for encoding and decoding POSIX ACLs for the NFSACL
protocol extension, and the GETACL and SETACL RPCs. The implementation is
compatible with NFSACL in Solaris.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Acked-by: Olaf Kirch <okir@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Alexey Dobriyan
David Howells
Andreas Gruenbacher
Greg Kroah-Hartman
Amy Griffis
Joel Becker
Andrew Morton
Jens Axboe
Christoph Hellwig
Mark Fasheh
Ram Pai
Miklos Szeredi
Eric Van Hensbergen
Tom Zanussi
Robert Love
Linus Torvalds