Граф коммитов

4 Коммитов

Автор SHA1 Сообщение Дата
Dan Carpenter 0d0a2bf6ed thermal: rockchip: fix an error code
There is a copy and paste bug, "->clk" vs "->pclk", so we return the
wrong error code here.

Fixes: cbac8f6394 ('thermal: rockchip: add driver for thermal')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-05-09 13:36:57 +08:00
Caesar Wang 1e9a1aea7a thermal: rockchip: make temperature reporting much more accurate
In general, the kernel should report temperature readings exactly as
reported by the hardware. The cpu / gpu thermal driver works in 5 degree
increments,but we ought to do more accurate. The temperature will do
linear interpolation between the entries in the table.

Test= $md5sum /dev/zero &
$while true; do grep "" /sys/class/thermal/thermal_zone[1-2]/temp;
sleep .5; done

e.g. We can get the result as follows:
    /sys/class/thermal/thermal_zone1/temp:39994
    /sys/class/thermal/thermal_zone2/temp:39086
    /sys/class/thermal/thermal_zone1/temp:39994
    /sys/class/thermal/thermal_zone2/temp:39540
    /sys/class/thermal/thermal_zone1/temp:39540
    /sys/class/thermal/thermal_zone2/temp:39540
    /sys/class/thermal/thermal_zone1/temp:39540
    /sys/class/thermal/thermal_zone2/temp:39994

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-01-24 23:38:36 -04:00
Wolfram Sang 0733d1387e thermal: drop owner assignment from platform_drivers
This platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-12-22 11:05:59 +08:00
Caesar Wang cbac8f6394 thermal: rockchip: add driver for thermal
Thermal is TS-ADC Controller module supports
user-defined mode and automatic mode.

User-defined mode refers,TSADC all the control signals entirely by
software writing to register for direct control.

Automaic mode refers to the module automatically poll TSADC output,
and the results were checked.If you find that the temperature High
in a period of time,an interrupt is generated to the processor
down-measures taken;If the temperature over a period of time High,
the resulting TSHUT gave CRU module,let it reset the entire chip,
or via GPIO give PMIC.

Signed-off-by: zhaoyifeng <zyf@rock-chips.com>
Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-11-24 14:35:07 -04:00