When updating a piece of broken logic from using get_user to
strncpy_from_user, we noticed that a warning which is expected when
calling a function that might fault from an atomic context with
pagefaults enabled disappeared.
Not having this warning in place can lead to calling strncpy_from_user
from an atomic context and eventually kernel crashes/stack corruption.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20200414225705.255711-1-kpsingh@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The range passed to user_access_begin() by strncpy_from_user() and
strnlen_user() starts at 'src' and goes up to the limit of userspace
although reads will be limited by the 'count' param.
On 32 bits powerpc (book3s/32) access has to be granted for each
256Mbytes segment and the cost increases with the number of segments to
unlock.
Limit the range with 'count' param.
Fixes: 594cc251fd ("make 'user_access_begin()' do 'access_ok()'")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "arm64: untag user pointers passed to the kernel", v19.
=== Overview
arm64 has a feature called Top Byte Ignore, which allows to embed pointer
tags into the top byte of each pointer. Userspace programs (such as
HWASan, a memory debugging tool [1]) might use this feature and pass
tagged user pointers to the kernel through syscalls or other interfaces.
Right now the kernel is already able to handle user faults with tagged
pointers, due to these patches:
1. 81cddd65 ("arm64: traps: fix userspace cache maintenance emulation on a
tagged pointer")
2. 7dcd9dd8 ("arm64: hw_breakpoint: fix watchpoint matching for tagged
pointers")
3. 276e9327 ("arm64: entry: improve data abort handling of tagged
pointers")
This patchset extends tagged pointer support to syscall arguments.
As per the proposed ABI change [3], tagged pointers are only allowed to be
passed to syscalls when they point to memory ranges obtained by anonymous
mmap() or sbrk() (see the patchset [3] for more details).
For non-memory syscalls this is done by untaging user pointers when the
kernel performs pointer checking to find out whether the pointer comes
from userspace (most notably in access_ok). The untagging is done only
when the pointer is being checked, the tag is preserved as the pointer
makes its way through the kernel and stays tagged when the kernel
dereferences the pointer when perfoming user memory accesses.
The mmap and mremap (only new_addr) syscalls do not currently accept
tagged addresses. Architectures may interpret the tag as a background
colour for the corresponding vma.
Other memory syscalls (mprotect, etc.) don't do user memory accesses but
rather deal with memory ranges, and untagged pointers are better suited to
describe memory ranges internally. Thus for memory syscalls we untag
pointers completely when they enter the kernel.
=== Other approaches
One of the alternative approaches to untagging that was considered is to
completely strip the pointer tag as the pointer enters the kernel with
some kind of a syscall wrapper, but that won't work with the countless
number of different ioctl calls. With this approach we would need a
custom wrapper for each ioctl variation, which doesn't seem practical.
An alternative approach to untagging pointers in memory syscalls prologues
is to inspead allow tagged pointers to be passed to find_vma() (and other
vma related functions) and untag them there. Unfortunately, a lot of
find_vma() callers then compare or subtract the returned vma start and end
fields against the pointer that was being searched. Thus this approach
would still require changing all find_vma() callers.
=== Testing
The following testing approaches has been taken to find potential issues
with user pointer untagging:
1. Static testing (with sparse [2] and separately with a custom static
analyzer based on Clang) to track casts of __user pointers to integer
types to find places where untagging needs to be done.
2. Static testing with grep to find parts of the kernel that call
find_vma() (and other similar functions) or directly compare against
vm_start/vm_end fields of vma.
3. Static testing with grep to find parts of the kernel that compare
user pointers with TASK_SIZE or other similar consts and macros.
4. Dynamic testing: adding BUG_ON(has_tag(addr)) to find_vma() and running
a modified syzkaller version that passes tagged pointers to the kernel.
Based on the results of the testing the requried patches have been added
to the patchset.
=== Notes
This patchset is meant to be merged together with "arm64 relaxed ABI" [3].
This patchset is a prerequisite for ARM's memory tagging hardware feature
support [4].
This patchset has been merged into the Pixel 2 & 3 kernel trees and is
now being used to enable testing of Pixel phones with HWASan.
Thanks!
[1] http://clang.llvm.org/docs/HardwareAssistedAddressSanitizerDesign.html
[2] 5f960cb10f
[3] https://lkml.org/lkml/2019/6/12/745
[4] https://community.arm.com/processors/b/blog/posts/arm-a-profile-architecture-2018-developments-armv85a
This patch (of 11)
This patch is a part of a series that extends kernel ABI to allow to pass
tagged user pointers (with the top byte set to something else other than
0x00) as syscall arguments.
strncpy_from_user and strnlen_user accept user addresses as arguments, and
do not go through the same path as copy_from_user and others, so here we
need to handle the case of tagged user addresses separately.
Untag user pointers passed to these functions.
Note, that this patch only temporarily untags the pointers to perform
validity checks, but then uses them as is to perform user memory accesses.
[andreyknvl@google.com: fix sparc4 build]
Link: http://lkml.kernel.org/r/CAAeHK+yx4a-P0sDrXTUxMvO2H0CJZUFPffBrg_cU7oJOZyC7ew@mail.gmail.com
Link: http://lkml.kernel.org/r/c5a78bcad3e94d6cda71fcaa60a423231ae71e4c.1563904656.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy reported objtool triggered on his (GCC-7.4) build:
lib/strncpy_from_user.o: warning: objtool: strncpy_from_user()+0x315: call to __ubsan_handle_add_overflow() with UACCESS enabled
lib/strnlen_user.o: warning: objtool: strnlen_user()+0x337: call to __ubsan_handle_sub_overflow() with UACCESS enabled
This is due to UBSAN generating signed-overflow-UB warnings where it
should not. Prior to GCC-8 UBSAN ignored -fwrapv (which the kernel
uses through -fno-strict-overflow).
Make the functions use 'unsigned long' throughout.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: http://lkml.kernel.org/r/20190424072208.754094071@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Originally, the rule used to be that you'd have to do access_ok()
separately, and then user_access_begin() before actually doing the
direct (optimized) user access.
But experience has shown that people then decide not to do access_ok()
at all, and instead rely on it being implied by other operations or
similar. Which makes it very hard to verify that the access has
actually been range-checked.
If you use the unsafe direct user accesses, hardware features (either
SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged
Access Never - on ARM) do force you to use user_access_begin(). But
nothing really forces the range check.
By putting the range check into user_access_begin(), we actually force
people to do the right thing (tm), and the range check vill be visible
near the actual accesses. We have way too long a history of people
trying to avoid them.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The strncpy_from_user() accessor is effectively a copy_from_user()
specialised to copy strings, terminating early at a NUL byte if possible.
In other respects it is identical, and can be used to copy an arbitrarily
large buffer from userspace into the kernel. Conceptually, it exposes a
similar attack surface.
As with copy_from_user(), we check the destination range when the kernel
is built with KASAN, but unlike copy_from_user() we do not check the
destination buffer when using HARDENED_USERCOPY. As strncpy_from_user()
calls get_user() in a loop, we must call check_object_size() explicitly.
This patch adds this instrumentation to strncpy_from_user(), per the same
rationale as with the regular copy_from_user(). In the absence of
hardened usercopy this will have no impact as the instrumentation expands
to an empty static inline function.
Link: http://lkml.kernel.org/r/1472221903-31181-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2aa ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.
That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.
In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.
So switch the interface to pass in an error label, rather than checking
the error value in the caller. Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).
So rather than
if (unsafe_get_user(x, ptr))
... handle error ..
the interface is now
unsafe_get_user(x, ptr, label);
where an error during the user mode fetch will now just cause a jump to
'label' in the caller.
Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.
Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched). But that is hopefully not a limitation in the
long term.
[ Also note that it might be a good idea to switch unsafe_get_user() to
actually _return_ the value it fetches from user space, but this
commit only changes the error handling semantics ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Exchange between user and kernel memory is coded in assembly language.
Which means that such accesses won't be spotted by KASAN as a compiler
instruments only C code.
Add explicit KASAN checks to user memory access API to ensure that
userspace writes to (or reads from) a valid kernel memory.
Note: Unlike others strncpy_from_user() is written mostly in C and KASAN
sees memory accesses in it. However, it makes sense to add explicit
check for all @count bytes that *potentially* could be written to the
kernel.
[aryabinin@virtuozzo.com: move kasan check under the condition]
Link: http://lkml.kernel.org/r/1462869209-21096-1-git-send-email-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/1462538722-1574-4-git-send-email-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This converts the generic user string functions to use the batched user
access functions.
It makes a big difference on Skylake, which is the first x86
microarchitecture to implement SMAP. The STAC/CLAC instructions are not
very fast, and doing them for each access inside the loop that copies
strings from user space (which is what the pathname handling does for
every pathname the kernel uses, for example) is very inefficient.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
strncpy_from_user.c only needs EXPORT_SYMBOL, so just include compiler.h
and export.h instead of the whole module.h machinery.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes the interfaces in <asm/word-at-a-time.h> to be a bit more
complicated, but a lot more generic.
In particular, it allows us to really do the operations efficiently on
both little-endian and big-endian machines, pretty much regardless of
machine details. For example, if you can rely on a fast population
count instruction on your architecture, this will allow you to make your
optimized <asm/word-at-a-time.h> file with that.
NOTE! The "generic" version in include/asm-generic/word-at-a-time.h is
not truly generic, it actually only works on big-endian. Why? Because
on little-endian the generic algorithms are wasteful, since you can
inevitably do better. The x86 implementation is an example of that.
(The only truly non-generic part of the asm-generic implementation is
the "find_zero()" function, and you could make a little-endian version
of it. And if the Kbuild infrastructure allowed us to pick a particular
header file, that would be lovely)
The <asm/word-at-a-time.h> functions are as follows:
- WORD_AT_A_TIME_CONSTANTS: specific constants that the algorithm
uses.
- has_zero(): take a word, and determine if it has a zero byte in it.
It gets the word, the pointer to the constant pool, and a pointer to
an intermediate "data" field it can set.
This is the "quick-and-dirty" zero tester: it's what is run inside
the hot loops.
- "prep_zero_mask()": take the word, the data that has_zero() produced,
and the constant pool, and generate an *exact* mask of which byte had
the first zero. This is run directly *outside* the loop, and allows
the "has_zero()" function to answer the "is there a zero byte"
question without necessarily getting exactly *which* byte is the
first one to contain a zero.
If you do multiple byte lookups concurrently (eg "hash_name()", which
looks for both NUL and '/' bytes), after you've done the prep_zero_mask()
phase, the result of those can be or'ed together to get the "either
or" case.
- The result from "prep_zero_mask()" can then be fed into "find_zero()"
(to find the byte offset of the first byte that was zero) or into
"zero_bytemask()" (to find the bytemask of the bytes preceding the
zero byte).
The existence of zero_bytemask() is optional, and is not necessary
for the normal string routines. But dentry name hashing needs it, so
if you enable DENTRY_WORD_AT_A_TIME you need to expose it.
This changes the generic strncpy_from_user() function and the dentry
hashing functions to use these modified word-at-a-time interfaces. This
gets us back to the optimized state of the x86 strncpy that we lost in
the previous commit when moving over to the generic version.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To use this, an architecture simply needs to:
1) Provide a user_addr_max() implementation via asm/uaccess.h
2) Add "select GENERIC_STRNCPY_FROM_USER" to their arch Kcnfig
3) Remove the existing strncpy_from_user() implementation and symbol
exports their architecture had.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
KP Singh
Christophe Leroy
Andrey Konovalov
Peter Zijlstra
Linus Torvalds
Greg Kroah-Hartman
Mark Rutland
Andrey Ryabinin
Rasmus Villemoes
David S. Miller