Граф коммитов

179 Коммитов

Автор SHA1 Сообщение Дата
Ingo Molnar 9e3ee1c39c Merge branch 'linus' into cpus4096
Conflicts:

	kernel/stop_machine.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-28 23:32:00 +02:00
Ingo Molnar 414f746d23 Merge branch 'linus' into cpus4096 2008-07-28 21:14:43 +02:00
Rusty Russell 784e2d7600 stop_machine: fix up ftrace.c
Simple conversion.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
2008-07-28 12:16:31 +10:00
Andrea Righi 605ccb73f6 tracing: remove unused variable
Remove the following warning with CONFIG_TRACING=y:

	kernel/trace/trace.c: In function ‘s_next’:
	kernel/trace/trace.c:1186: warning: unused variable ‘last_ent’

Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-27 09:58:20 -07:00
Linus Torvalds a048d3aff8 Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: fix modular build
  ftrace: disable tracing on acpi idle calls
  ftrace: remove latency-tracer leftover
  ftrace: only trace preempt off with preempt tracer
  ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
2008-07-26 13:25:47 -07:00
Mike Travis 0bc3cc03fa cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
* Replace previous instances of the cpumask_of_cpu_ptr* macros
    with a the new (lvalue capable) generic cpumask_of_cpu().

Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 16:40:33 +02:00
Ingo Molnar 1fe371044b ftrace: fix modular build
fix:

 ERROR: "start_critical_timings" [drivers/acpi/processor.ko] undefined!
 ERROR: "stop_critical_timings" [drivers/acpi/processor.ko] undefined!

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-26 15:08:22 +02:00
Harvey Harrison a89cc1959d markers: fix sparse integer as NULL pointer warning
kernel/trace/trace_sysprof.c:164:20: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:45 -07:00
Ingo Molnar 1986b0cb16 ftrace: remove latency-tracer leftover
remove the :vim=ft=help tag from trace files.

I used them years ago to syntax-highlight traces and forgot about this hack.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-24 08:10:02 +02:00
Ingo Molnar 28afe961a1 Merge branch 'linus' into tracing/urgent 2008-07-24 08:09:26 +02:00
Mike Travis 65c0118453 cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
* This patch replaces the dangerous lvalue version of cpumask_of_cpu
    with new cpumask_of_cpu_ptr macros.  These are patterned after the
    node_to_cpumask_ptr macros.

    In general terms, if there is a cpumask_of_cpu_map[] then a pointer to
    the cpumask_of_cpu_map[cpu] entry is used.  The cpumask_of_cpu_map
    is provided when there is a large NR_CPUS count, reducing
    greatly the amount of code generated and stack space used for
    cpumask_of_cpu().  The pointer to the cpumask_t value is needed for
    calling set_cpus_allowed_ptr() to reduce the amount of stack space
    needed to pass the cpumask_t value.

    If there isn't a cpumask_of_cpu_map[], then a temporary variable is
    declared and filled in with value from cpumask_of_cpu(cpu) as well as
    a pointer variable pointing to this temporary variable.  Afterwards,
    the pointer is used to reference the cpumask value.  The compiler
    will optimize out the extra dereference through the pointer as well
    as the stack space used for the pointer, resulting in identical code.

    A good example of the orthogonal usages is in net/sunrpc/svc.c:

	case SVC_POOL_PERCPU:
	{
		unsigned int cpu = m->pool_to[pidx];
		cpumask_of_cpu_ptr(cpumask, cpu);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, cpumask);
		return 1;
	}
	case SVC_POOL_PERNODE:
	{
		unsigned int node = m->pool_to[pidx];
		node_to_cpumask_ptr(nodecpumask, node);

		*oldmask = current->cpus_allowed;
		set_cpus_allowed_ptr(current, nodecpumask);
		return 1;
	}

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 22:02:57 +02:00
Steven Rostedt 1e01cb0c6f ftrace: only trace preempt off with preempt tracer
When PREEMPT_TRACER and IRQSOFF_TRACER are both configured and irqsoff
tracer is running, the preempt_off sections might also be traced.

Thanks to Andrew Morton for pointing out my mistake of spin_lock disabling
interrupts while he was reviewing ftrace.txt. Seems that my example I used
actually hit this bug.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 18:57:34 +02:00
Steven Rostedt e59494f441 ftrace: fix 4d3702b6 (post-v2.6.26): WARNING: at kernel/lockdep.c:2731 check_flags (ftrace)
On Wed, 16 Jul 2008, Vegard Nossum wrote:

> When booting 4d3702b6, I got this huge thing:
>
> Testing tracer wakeup: <4>------------[ cut here ]------------
> WARNING: at kernel/lockdep.c:2731 check_flags+0x123/0x160()
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.26-crashing-02127-g4d3702b6 #30
>  [<c015c349>] warn_on_slowpath+0x59/0xb0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c012d800>] ? native_read_tsc+0x0/0x20
>  [<c0158de2>] ? sub_preempt_count+0x12/0xf0
>  [<c01814eb>] ? trace_hardirqs_off+0xb/0x10
>  [<c0182fbc>] ? __lock_acquire+0x2cc/0x1120
>  [<c01814eb>] ? trace_hardirqs_off+0xb/0x10
>  [<c01276af>] ? mcount_call+0x5/0xa
>  [<c017ff53>] check_flags+0x123/0x160
>  [<c0183e61>] lock_acquire+0x51/0xd0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0
>  [<c01a8d45>] ? ftrace_record_ip+0xf5/0x220
>  [<c02d5413>] ? debug_locks_off+0x3/0x50
>  [<c01a8d45>] ftrace_record_ip+0xf5/0x220
>  [<c01276af>] mcount_call+0x5/0xa
>  [<c02d5418>] ? debug_locks_off+0x8/0x50
>  [<c017ff27>] check_flags+0xf7/0x160
>  [<c0183e61>] lock_acquire+0x51/0xd0
>  [<c01276c6>] ? ftrace_call+0x5/0x8
>  [<c0613d4f>] _spin_lock_irqsave+0x5f/0xa0
>  [<c01affcd>] ? wakeup_tracer_call+0x6d/0xf0
>  [<c01625e2>] ? _local_bh_enable+0x62/0xb0
>  [<c0158ddd>] ? sub_preempt_count+0xd/0xf0
>  [<c01affcd>] wakeup_tracer_call+0x6d/0xf0
>  [<c0162724>] ? __do_softirq+0xf4/0x110
>  [<c01afff1>] ? wakeup_tracer_call+0x91/0xf0
>  [<c01276c6>] ftrace_call+0x5/0x8
>  [<c0162724>] ? __do_softirq+0xf4/0x110
>  [<c0158de2>] ? sub_preempt_count+0x12/0xf0
>  [<c01625e2>] _local_bh_enable+0x62/0xb0
>  [<c0162724>] __do_softirq+0xf4/0x110
>  [<c01627ed>] do_softirq+0xad/0xb0
>  [<c0162a15>] irq_exit+0xa5/0xb0
>  [<c013a506>] smp_apic_timer_interrupt+0x66/0xa0
>  [<c02d3fac>] ? trace_hardirqs_off_thunk+0xc/0x10
>  [<c0127449>] apic_timer_interrupt+0x2d/0x34
>  [<c018007b>] ? find_usage_backwards+0xb/0xf0
>  [<c0613a09>] ? _spin_unlock_irqrestore+0x69/0x80
>  [<c014ef32>] tg_shares_up+0x132/0x1d0
>  [<c014d2a2>] walk_tg_tree+0x62/0xa0
>  [<c014ee00>] ? tg_shares_up+0x0/0x1d0
>  [<c014a860>] ? tg_nop+0x0/0x10
>  [<c015499d>] update_shares+0x5d/0x80
>  [<c0154a2f>] try_to_wake_up+0x6f/0x280
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c0154c94>] wake_up_process+0x14/0x20
>  [<c01725f6>] kthread_create+0x66/0xb0
>  [<c0195400>] ? do_stop+0x0/0x200
>  [<c0195320>] ? __stop_machine_run+0x30/0xb0
>  [<c0195340>] __stop_machine_run+0x50/0xb0
>  [<c0195400>] ? do_stop+0x0/0x200
>  [<c01a8b90>] ? __ftrace_modify_code+0x0/0xc0
>  [<c061242d>] ? mutex_unlock+0xd/0x10
>  [<c01953cc>] stop_machine_run+0x2c/0x60
>  [<c01a94d3>] unregister_ftrace_function+0x103/0x180
>  [<c01b0517>] stop_wakeup_tracer+0x17/0x60
>  [<c01b056f>] wakeup_tracer_ctrl_update+0xf/0x30
>  [<c01ab8d5>] trace_selftest_startup_wakeup+0xb5/0x130
>  [<c01ab950>] ? trace_wakeup_test_thread+0x0/0x70
>  [<c01aadf5>] register_tracer+0x135/0x1b0
>  [<c0877d02>] init_wakeup_tracer+0xd/0xf
>  [<c085d437>] kernel_init+0x1a9/0x2ce
>  [<c061397b>] ? _spin_unlock_irq+0x3b/0x60
>  [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10
>  [<c0877cf5>] ? init_wakeup_tracer+0x0/0xf
>  [<c0182646>] ? trace_hardirqs_on_caller+0x126/0x180
>  [<c02d3f9c>] ? trace_hardirqs_on_thunk+0xc/0x10
>  [<c01269c8>] ? restore_nocheck_notrace+0x0/0xe
>  [<c085d28e>] ? kernel_init+0x0/0x2ce
>  [<c085d28e>] ? kernel_init+0x0/0x2ce
>  [<c01275fb>] kernel_thread_helper+0x7/0x10
>  =======================
> ---[ end trace a7919e7f17c0a725 ]---
> irq event stamp: 579530
> hardirqs last  enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10
> hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10
> softirqs last  enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110
> softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0
> irq event stamp: 579530
> hardirqs last  enabled at (579528): [<c01826ab>] trace_hardirqs_on+0xb/0x10
> hardirqs last disabled at (579529): [<c01814eb>] trace_hardirqs_off+0xb/0x10
> softirqs last  enabled at (579530): [<c0162724>] __do_softirq+0xf4/0x110
> softirqs last disabled at (579517): [<c01627ed>] do_softirq+0xad/0xb0
> PASSED
>
> Incidentally, the kernel also hung while I was typing in this report.

Things get weird between lockdep and ftrace because ftrace can be called
within lockdep internal code (via the mcount pointer) and lockdep can be
called with ftrace (via spin_locks).

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 13:47:15 +02:00
Ingo Molnar 6712e299b7 Merge branch 'tracing/ftrace' into auto-ftrace-next 2008-07-14 15:58:35 +02:00
Ingo Molnar b2613e370d ftrace: build fix for ftraced_suspend
fix:

 kernel/trace/ftrace.c:1615: error: 'ftraced_suspend' undeclared (first use in this function)
 kernel/trace/ftrace.c:1615: error: (Each undeclared identifier is reported only once
 kernel/trace/ftrace.c:1615: error: for each function it appears in.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 16:46:50 +02:00
Steven Rostedt 60bc080090 ftrace: separate out the function enabled variable
Currently the function tracer uses the global tracer_enabled variable that
is used to keep track if the tracer is enabled or not. The function tracing
startup needs to be separated out, otherwise the internal happenings of
the tracer startup is also recorded.

This patch creates a ftrace_function_enabled variable to all the starting
of the function traces to happen after everything has been started.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:22 +02:00
Steven Rostedt a2bb6a3d85 ftrace: add ftrace_kill_atomic
It has been suggested that I add a way to disable the function tracer
on an oops. This code adds a ftrace_kill_atomic. It is not meant to be
used in normal situations. It will disable the ftrace tracer, but will
not perform the nice shutdown that requires scheduling.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:21 +02:00
Steven Rostedt 26bc83f4cb ftrace: use current CPU for function startup
This is more of a clean up. Currently the function tracer initializes the
tracer with which ever CPU was last used for tracing. This value isn't
realy useful for function tracing, but at least it should be something other
than a random number.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:21 +02:00
Steven Rostedt ad591240ce ftrace: start wakeup tracing after setting function tracer
Enabling the wakeup tracer before enabling the function tracing causes
some strange results due to the dynamic enabling of the functions.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:20 +02:00
Steven Rostedt b5c21b4514 ftrace: check proper config for preempt type
There is no CONFIG_PREEMPT_DESKTOP. Use the proper entry CONFIG_PREEMPT.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:19 +02:00
Steven Rostedt 001b6767b1 ftrace: define function trace nop
When CONFIG_FTRACE is not enabled, the tracing_start_functon_trace
and tracing_stop_function_trace should be nops.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:18 +02:00
Steven Rostedt 007c05d4d2 ftrace: move sched_switch enable after markers
We have two markers now that are enabled on sched_switch. One that records
the context switching and the other that records task wake ups. Currently
we enable the tracing first and then set the markers. This causes some
confusing traces:

# tracer: sched_switch
#
#           TASK-PID   CPU#    TIMESTAMP  FUNCTION
#              | |      |          |         |
       trace-cmd-3973  [00]   115.834817:   3973:120:R   +     3:  0:S
       trace-cmd-3973  [01]   115.834910:   3973:120:R   +     6:  0:S
       trace-cmd-3973  [02]   115.834910:   3973:120:R   +     9:  0:S
       trace-cmd-3973  [03]   115.834910:   3973:120:R   +    12:  0:S
       trace-cmd-3973  [02]   115.834910:   3973:120:R   +     9:  0:S
          <idle>-0     [02]   115.834910:      0:140:R ==>  3973:120:R

Here we see that trace-cmd with PID 3973 wakes up task 9 but the next line
shows the idle task doing a context switch to task 3973.

Enabling the tracing to _after_ the markers are set creates a much saner
output:

# tracer: sched_switch
#
#           TASK-PID   CPU#    TIMESTAMP  FUNCTION
#              | |      |          |         |
          <idle>-0     [02]  7922.634225:      0:140:R ==>  4790:120:R
       trace-cmd-4789  [03]  7922.634225:      0:140:R   +  4790:120:R

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-11 15:49:18 +02:00
Ingo Molnar ec1bb60bbf Merge branch 'tracing/sysprof' into auto-ftrace-next 2008-07-10 11:43:08 +02:00
Ingo Molnar 5373fdbdc1 Merge branch 'tracing/mmiotrace' into auto-ftrace-next 2008-07-10 11:43:06 +02:00
Abhishek Sagar 98a05ed4bd ftrace: prevent ftrace modifications while being kprobe'd, v2
add two missing chunks for ftrace+kprobe.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-03 14:46:24 +02:00
Abhishek Sagar f22f9a89ce ftrace: avoid modifying kprobe'd records
Avoid modifying the mcount call-site if there is a kprobe installed on it.
These records are not marked as failed however. This allowed the filter
rules on them to remain up-to-date. Whenever the kprobe on the corresponding
record is removed, the record gets updated as normal.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23 22:10:59 +02:00
Abhishek Sagar ecea656d1d ftrace: freeze kprobe'd records
Let records identified as being kprobe'd be marked as "frozen". The trouble
with records which have a kprobe installed on their mcount call-site is
that they don't get updated. So if such a function which is currently being
traced gets its tracing disabled due to a new filter rule (or because it
was added to the notrace list) then it won't be updated and continue being
traced. This patch allows scanning of all frozen records during tracing to
check if they should be traced.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23 22:10:58 +02:00
Abhishek Sagar 395a59d0f8 ftrace: store mcount address in rec->ip
Record the address of the mcount call-site. Currently all archs except sparc64
record the address of the instruction following the mcount call-site. Some
general cleanups are entailed. Storing mcount addresses in rec->ip enables
looking them up in the kprobe hash table later on to check if they're kprobe'd.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: davem@davemloft.net
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-23 22:10:56 +02:00
Ingo Molnar f22529351f namespacecheck: fixes
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-16 14:44:13 +02:00
Abhishek Sagar a4500b84c5 ftrace: fix "notrace" filtering priority
This is a fix to give notrace filter rules priority over "set_ftrace_filter"
rules.

This fix ensures that functions which are set to be filtered and are
concurrently marked as "notrace" don't get recorded. As of now, if
a record is marked as FTRACE_FL_FILTER and is enabled, then the notrace
flag is not checked. Tested on x86-32.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-14 08:32:29 +02:00
Jiri Slaby 20764ff1ef ftrace: fix printout
Do not print loglevel before "entries of %ld bytes". Move it to the previous
pr_info.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-12 11:51:03 +02:00
Ankita Garg 2b1bce1787 ftrace: disable tracing when current_tracer is set to "none"
Found that inspite of setting the current_tracer to "none", trace from
the previous trace type continued to be collected. The patch below fixes
this and causes the trace to be disabled when the "none" type is
selected.

Compile and boot tested the patch for functionality.

Signed-off-by: Ankita Garg <ankita@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 14:52:30 +02:00
Abhishek Sagar 34078a5e44 ftrace: prevent freeing of all failed updates
Steven Rostedt wrote:
> If we unload a module and reload it, will it ever get converted again?

The intent was always to filter core kernel functions to prevent their freeing.
Here's a fix which should allow re-recording of module call-sites.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:59:05 +02:00
Abhishek Sagar eb9a7bf091 ftrace: add debugfs entry 'failures'
Identify functions which had their mcount call-site updates failed. This can
help us track functions which ftrace shouldn't fiddle with, and are thus not
being traced. If there is no race with any external agent which is modifying
the mcount call-site, then this file displays no entries (normal case).

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:58:17 +02:00
Abhishek Sagar 1d74f2a0f6 ftrace: remove ftrace_ip_converted()
Remove the unneeded function ftrace_ip_converted().

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:57:49 +02:00
Abhishek Sagar 0eb967012e ftrace: prevent freeing of all failed updates
Prevent freeing of records which cause problems and correspond to function from
core kernel text. A new flag, FTRACE_FL_CONVERTED is used to mark a record
as "converted". All other records are patched lazily to NOPs. Failed records
now also remain on frace_hash table. Each invocation of ftrace_record_ip now
checks whether the traced function has ever been recorded (including past
failures) and doesn't re-record it again.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-10 11:56:57 +02:00
Steven Rostedt ad90c0e3ce ftrace: user update and disable dynamic ftrace daemon
In dynamic ftrace, the mcount function starts off pointing to a stub
function that just returns.

On start up, the call to the stub is modified to point to a "record_ip"
function. The job of the record_ip function is to add the function to
a pre-allocated hash list. If the function is already there, it simply is
ignored, otherwise it is added to the list.

Later, a ftraced daemon wakes up and calls kstop_machine if any functions
have been recorded, and changes the calls to the recorded functions to
a simple nop.  If no functions were recorded, the daemon goes back to sleep.

The daemon wakes up once a second to see if it needs to update any newly
recorded functions into nops.  Usually it does not, but if a lot of code
has been executed for the first time in the kernel, the ftraced daemon
will call kstop_machine to update those into nops.

The problem currently is that there's no way to stop the daemon from doing
this, and it can cause unneeded latencies (800us which for some is bothersome).

This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon
is active, reading this will return "enabled\n" and "disabled\n" when the
daemon is not running. To disable the daemon, the user can echo "0" or
"disable" into this file, and "1" or "enable" to re-enable the daemon.

Since the daemon is used to convert the functions into nops to increase
the performance of the system, I also added that anytime something is
written into the ftraced_enabled file, kstop_machine will run if there
are new functions that have been detected that need to be converted.

This way the user can disable the daemon but still be able to control the
conversion of the mcount calls to nops by simply,

  "echo 0 > /debugfs/tracing/ftraced_enabled"

when they need to do more conversions.

To see the number of converted functions:

  "cat /debugfs/tracing/dyn_ftrace_total_info"

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 12:50:04 +02:00
Abhishek Sagar 76094a2cf4 ftrace: distinguish kretprobe'd functions in trace logs
Tracing functions via ftrace which have a kretprobe installed on them, can produce misleading output in their trace logs. E.g, consider the correct trace of the following sequence:

do_IRQ()
{
~
  irq_enter();
~
}

Trace log (sample):
<idle>-0     [00] 4154504455.781616: irq_enter <- do_IRQ

But if irq_enter() has a kretprobe installed on it, the return value stored on the stack at each invocation is modified to divert the return to a kprobe trampoline function called kretprobe_trampoline(). So with this the trace would (currently) look like:

<idle>-0     [00] 4154504455.781616: irq_enter <- kretprobe_trampoline

Now this is quite misleading to the end user, as it suggests something that didn't actually happen. So just to avoid such misinterpretations, the inlined patch aims to output such a log as:

<idle>-0     [00] 4154504455.781616: irq_enter <- [unknown/kretprobe'd]

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-02 12:41:19 +02:00
Abhishek Sagar 492a7ea5bc ftrace: fix updating of ftrace_update_cnt
Hi Ingo/Steven,

Ftrace currently maintains an update count which includes false updates,
i.e, updates which failed. If anything, such failures should be tracked
by some separate variable, but this patch provides a minimal fix.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: rostedt@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:52:10 +02:00
Abhishek Sagar ffdaa3582b ftrace: safe traversal of ftrace_hash hlist
Hi Steven,

I noticed that concurrent instances of ftrace_record_ip()
have a race between ftrace_hash list traversal during
ftrace_ip_in_hash() (before acquiring ftrace_shutdown_lock)
and ftrace_add_hash(). If it's so then this should fix it.

Signed-off-by: Abhishek Sagar <sagar.abhishek@gmail.com>
Cc: rostedt@goodmis.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:52:04 +02:00
Steven Rostedt 41bc8144d0 ftrace: fix up cmdline recording
The new work with converting the trace hooks over to markers broke the
command line recording of ftrace. This patch fixes it again.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:49 +02:00
Steven Rostedt 41c52c0db9 ftrace: set_ftrace_notrace feature
While debugging latencies in the RT kernel, I found that it would be nice
to be able to filter away functions from the trace than just to filter
on functions.

I added a new interface to the debugfs tracing directory called

  set_ftrace_notrace

When dynamic frace is enabled, this lets you filter away functions that will
not be recorded in the trace. It is similar to adding 'notrace' to those
functions but by doing it without recompiling the kernel.

Here's how set_ftrace_filter and set_ftrace_notrace interact. Remember, if
set_ftrace_filter is set, it removes all functions from the trace execpt for
those listed in the set_ftrace_filter. set_ftrace_notrace will prevent those
functions from being traced.

If you were to set one function in both set_ftrace_filter and
set_ftrace_notrace and that function was the same, then you would end up
with an empty trace.

the set of functions to trace is:

  set_ftrace_filter == empty then

     all functions not in set_ftrace_notrace

  else

     set of the set_ftrace_filter and not in set of set_ftrace_notrace.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:37 +02:00
Steven Rostedt da89a7a253 ftrace: remove printks from irqsoff trace
Printing out new max latencies was fine for the old RT tracer. But for
mainline it is a bit messy. We also need to test if the run queue
is locked before we can do the print. This means that we may not be
printing out latencies if the run queue is locked on another CPU.
This produces inconsistencies in the output.

This patch simply removes the print altogether.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:27 +02:00
Steven Rostedt 7e18d8e701 ftrace: add function tracing to wake up tracing
This patch adds function tracing to the functions that are called
on the CPU of the task being traced.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:22 +02:00
Steven Rostedt 4902f8849d ftrace: move ftrace_special to trace.c
Move the ftrace_special out of sched_switch to trace.c.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:51:09 +02:00
Steven Rostedt 19384c0314 ftrace: limit use of check pages
The check_pages function is called often enough that it can cause problems
with trace outputs or even bringing the system to a halt.

This patch limits the check_pages to the places that are most likely to
have problems. The check is made at the flip between the global array and
the max save array, as well as when the size of the buffers changes and
the self tests.

This patch also removes the BUG_ON from check_pages and replaces it with
a WARN_ON and disabling of the tracer.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Cc: pq@iki.fi
Cc: proski@gnu.org
Cc: sandmann@redhat.com
Cc: a.p.zijlstra@chello.nl
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-26 22:39:45 +02:00
Thomas Gleixner 4d2df795f0 sysprof: make it depend on X86
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 15:00:46 +02:00
Pekka Paalanen dee310d0ad x86 mmiotrace: use resource_size_t for phys addresses
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:36 +02:00
Pekka Paalanen e0fd5c2fa1 mmiotrace: do not print bogus pid for maps either
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:15 +02:00
Pekka Paalanen 2039238b79 mmiotrace: print overrun counts
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-05-24 11:27:08 +02:00