To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.
Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.
Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: Steve French <smfrench@gmail.com>
Previous patches "cifs: update calc_size to take a server argument"
and
"cifs: add server argument to the dump_detail method"
were broken if CONFIG_CIFS_DEBUG2 enabled
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs. This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).
Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Now signing is supported with RDMA transport.
Remove the code that disabled it.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Temporarily disable AES-GCM, as AES-CCM is only currently
enabled mechanism on client side. This fixes SMB3.11
encrypted mounts to Windows.
Also the tree connect request itself should be encrypted if
requested encryption ("seal" on mount), in addition we should be
enabling encryption in 3.11 based on whether we got any valid
encryption ciphers back in negprot (the corresponding session flag is
not set as it is in 3.0 and 3.02)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
and get rid of some more calls to get_rfc1002_length()
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
and get rid of some get_rfc1002_length() in smb2
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
This variable is set to 4 for all protocol versions and replaces
the hardcoded constant 4 throughought the code.
This will later be updated to reflect whether a response packet
has a 4 byte length preamble or not once we start removing this
field from the SMB2+ dialects.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Change the following message (which can occur on reconnect) from
a warning to an FYI message. It is confusing to users.
[58360.523634] CIFS VFS: Free previous auth_key.response = 00000000a91cdc84
By default this message won't show up on reconnect unless the user bumps
up the log level to include FYI messages.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
also replaces memset()+kfree() by kzfree().
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Node is assigned twice to rb_first(root), first during declaration
time and second after a taking a spin lock, so we have a duplicated
assignment. Remove the first assignment because it is redundant and
also not protected by the spin lock.
Cleans up clang warning:
fs/cifs/connect.c:4435:18: warning: Value stored to 'node' during
its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Currently the CIFS SMB Direct implementation (experimental) doesn't properly
support signing. Disable it when SMB Direct is in use for transport.
Signing will be enabled in future after it is implemented.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With SMB Direct connected, use it for receiving data via RDMA receive.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When upper layer wants to umount, make it call shutdown on transport when
SMB Direct is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Do a reconnect on SMB Direct when it is used as the connection. Reconnect can
happen for many reasons and it's mostly the decision of SMB2 upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
When "rdma" is specified in the mount option, make CIFS connect to
SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add "rdma" to CIFS mount options to connect to SMB Direct.
Add checks to validate this is used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
At the time of this patch, 3.x can be 3.0, 3.02 or 3.1.1.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
There is a race that cause cifs reconnect in cifs_mount,
- cifs_mount
- cifs_get_tcp_session
- [ start thread cifs_demultiplex_thread
- cifs_read_from_socket: -ECONNABORTED
- DELAY_WORK smb2_reconnect_server ]
- cifs_setup_session
- [ smb2_reconnect_server ]
auth_key.response was allocated in cifs_setup_session, and
will release when the session destoried. So when session re-
connect, auth_key.response should be check and released.
Tested with my system:
CIFS VFS: Free previous auth_key.response = ffff8800320bbf80
A simple auth_key.response allocation call trace:
- cifs_setup_session
- SMB2_sess_setup
- SMB2_sess_auth_rawntlmssp_authenticate
- build_ntlmssp_auth_blob
- setup_ntlmv2_rsp
Signed-off-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With the need to discourage use of less secure dialect, SMB1 (CIFS),
we temporarily upgraded the dialect to SMB3 in 4.13, but since there
are various servers which only support SMB2.1 (2.1 is more secure
than CIFS/SMB1) but not optimal for a default dialect - add support
for multidialect negotiation. cifs.ko will now request SMB2.1
or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will
pick the latest most secure one it can support.
In addition since we are sending multidialect negotiate, add
support for secure negotiate to validate that a man in the
middle didn't downgrade us.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.13+
Some servers seem to accept connections while booting but never send
the SMBNegotiate response neither close the connection, causing all
processes accessing the share hang on uninterruptible sleep state.
This happens when the cifs_demultiplex_thread detects the server is
unresponsive so releases the socket and start trying to reconnect.
At some point, the faulty server will accept the socket and the TCP
status will be set to NeedNegotiate. The first issued command accessing
the share will start the negotiation (pid 5828 below), but the response
will never arrive so other commands will be blocked waiting on the mutex
(pid 55352).
This patch checks for unresponsive servers also on the negotiate stage
releasing the socket and reconnecting if the response is not received
and checking again the tcp state when the mutex is acquired.
PID: 55352 TASK: ffff880fd6cc02c0 CPU: 0 COMMAND: "ls"
#0 [ffff880fd9add9f0] schedule at ffffffff81467eb9
#1 [ffff880fd9addb38] __mutex_lock_slowpath at ffffffff81468fe0
#2 [ffff880fd9addba8] mutex_lock at ffffffff81468b1a
#3 [ffff880fd9addbc0] cifs_reconnect_tcon at ffffffffa042f905 [cifs]
#4 [ffff880fd9addc60] smb_init at ffffffffa042faeb [cifs]
#5 [ffff880fd9addca0] CIFSSMBQPathInfo at ffffffffa04360b5 [cifs]
....
Which is waiting a mutex owned by:
PID: 5828 TASK: ffff880fcc55e400 CPU: 0 COMMAND: "xxxx"
#0 [ffff880fbfdc19b8] schedule at ffffffff81467eb9
#1 [ffff880fbfdc1b00] wait_for_response at ffffffffa044f96d [cifs]
#2 [ffff880fbfdc1b60] SendReceive at ffffffffa04505ce [cifs]
#3 [ffff880fbfdc1bb0] CIFSSMBNegotiate at ffffffffa0438d79 [cifs]
#4 [ffff880fbfdc1c50] cifs_negotiate_protocol at ffffffffa043b383 [cifs]
#5 [ffff880fbfdc1c80] cifs_reconnect_tcon at ffffffffa042f911 [cifs]
#6 [ffff880fbfdc1d20] smb_init at ffffffffa042faeb [cifs]
#7 [ffff880fbfdc1d60] CIFSSMBQFSInfo at ffffffffa0434eb0 [cifs]
....
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Aurélien Aptel <aaptel@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
When mounting to older servers, such as Windows XP (or even Windows 7),
the limited error messages that can be passed back to user space can
get confusing since the default dialect has changed from SMB1 (CIFS) to
more secure SMB3 dialect. Log additional information when the user chooses
to use the default dialects and when the server does not support the
dialect requested.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Due to recent publicity about security vulnerabilities in the
much older CIFS dialect, move the default dialect to the
widely accepted (and quite secure) SMB3.0 dialect from the
old default of the CIFS dialect.
We do not want to be encouraging use of less secure dialects,
and both Microsoft and CERT now strongly recommend not using the
older CIFS dialect (SMB Security Best Practices
"recommends disabling SMBv1").
SMB3 is both secure and widely available: in Windows 8 and later,
Samba and Macs.
Users can still choose to explicitly mount with the less secure
dialect (for old servers) by choosing "vers=1.0" on the cifs
mount
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Remove the CONFIG_CIFS_SMB2 ifdef and Kconfig option since they
must always be on now.
For various security reasons, SMB3 and later are STRONGLY preferred
over CIFS and older dialects, and SMB3 (and later) will now be
the default dialects so we do not want to allow them to be
ifdeffed out.
In the longer term, we may be able to make older CIFS support
disableable in Kconfig with a new set of #ifdef, but we always
want SMB3 and later support enabled.
Signed-off-by: Steven French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
According to the MS-SMB2 spec (3.2.5.1.6) once the client receives
STATUS_NETWORK_SESSION_EXPIRED error code from a server it should
reconnect the current SMB session. Currently the client doesn't do
that. This can result in subsequent client requests failing by
the server. The patch adds an additional logic to the demultiplex
thread to identify expired sessions and reconnect them.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull cifs fixes from Steve French:
"Various fixes for stable for CIFS/SMB3 especially for better
interoperability for SMB3 to Macs.
It also includes Pavel's improvements to SMB3 async i/o support
(which is much faster now)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: add misssing SFM mapping for doublequote
SMB3: Work around mount failure when using SMB3 dialect to Macs
cifs: fix CIFS_IOC_GET_MNT_INFO oops
CIFS: fix mapping of SFM_SPACE and SFM_PERIOD
CIFS: fix oplock break deadlocks
cifs: fix CIFS_ENUMERATE_SNAPSHOTS oops
cifs: fix leak in FSCTL_ENUM_SNAPS response handling
Set unicode flag on cifs echo request to avoid Mac error
CIFS: Add asynchronous write support through kernel AIO
CIFS: Add asynchronous read support through kernel AIO
CIFS: Add asynchronous context to support kernel AIO
cifs: fix IPv6 link local, with scope id, address parsing
cifs: small underflow in cnvrtDosUnixTm()
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
When the IP address is gotten from the UNC, use only the address part
of the UNC. Else all after the percent sign in an IPv6 link local
address is interpreted as a scope id. This includes the slash and
share name. A scope id is expected to be an integer and any trailing
characters makes the conversion to integer fail.
Example of mount command that fails:
mount -i -t cifs //fe80::6a05:caff:fe3e:8ffc%2/test /mnt/t -o sec=none
Signed-off-by: Daniel N Pettersson <danielnp@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Pull CIFS fixes from Steve French:
"Three cifs/smb3 fixes - including two for stable"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: don't check for failure from mempool_alloc()
Do not return number of bytes written for ioctl CIFS_IOC_COPYCHUNK_FILE
Fix match_prepath()
Pull block layer updates from Jens Axboe:
- Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
was initially a fork of CFQ, but subsequently changed to implement
fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
to be used on desktop type single drives, providing good fairness.
From Paolo.
- Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
using a scalable token based algorithm that throttles IO based on
live completion IO stats, similary to blk-wbt. From Omar.
- A series from Jan, moving users to separately allocated backing
devices. This continues the work of separating backing device life
times, solving various problems with hot removal.
- A series of updates for lightnvm, mostly from Javier. Includes a
'pblk' target that exposes an open channel SSD as a physical block
device.
- A series of fixes and improvements for nbd from Josef.
- A series from Omar, removing queue sharing between devices on mostly
legacy drivers. This helps us clean up other bits, if we know that a
queue only has a single device backing. This has been overdue for
more than a decade.
- Fixes for the blk-stats, and improvements to unify the stats and user
windows. This both improves blk-wbt, and enables other users to
register a need to receive IO stats for a device. From Omar.
- blk-throttle improvements from Shaohua. This provides a scalable
framework for implementing scalable priotization - particularly for
blk-mq, but applicable to any type of block device. The interface is
marked experimental for now.
- Bucketized IO stats for IO polling from Stephen Bates. This improves
efficiency of polled workloads in the presence of mixed block size
IO.
- A few fixes for opal, from Scott.
- A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
From a variety of folks, mostly Sagi and James Smart.
- A series from Bart, improving our exposed info and capabilities from
the blk-mq debugfs support.
- A series from Christoph, cleaning up how handle WRITE_ZEROES.
- A series from Christoph, cleaning up the block layer handling of how
we track errors in a request. On top of being a nice cleanup, it also
shrinks the size of struct request a bit.
- Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
never used by platforms, and the latter has outlived it's usefulness.
- Various little bug fixes and cleanups from a wide variety of folks.
* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
block: hide badblocks attribute by default
blk-mq: unify hctx delay_work and run_work
block: add kblock_mod_delayed_work_on()
blk-mq: unify hctx delayed_run_work and run_work
nbd: fix use after free on module unload
MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
blk-mq-sched: alloate reserved tags out of normal pool
mtip32xx: use runtime tag to initialize command header
scsi: Implement blk_mq_ops.show_rq()
blk-mq: Add blk_mq_ops.show_rq()
blk-mq: Show operation, cmd_flags and rq_flags names
blk-mq: Make blk_flags_show() callers append a newline character
blk-mq: Move the "state" debugfs attribute one level down
blk-mq: Unregister debugfs attributes earlier
blk-mq: Only unregister hctxs for which registration succeeded
blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
blk-mq: Let blk_mq_debugfs_register() look up the queue name
blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
ide-pm: always pass 0 error to __blk_end_request_all
..
Incorrect return value for shares not using the prefix path means that
we will never match superblocks for these shares.
Fixes: commit c1d8b24d18 ("Compare prepaths when comparing superblocks")
Cc: stable@vger.kernel.org
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Allocate struct backing_dev_info separately instead of embedding it
inside superblock. This unifies handling of bdi among users.
CC: Steve French <sfrench@samba.org>
CC: linux-cifs@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Conflicts were simply overlapping changes. In the net/ipv4/route.c
case the code had simply moved around a little bit and the same fix
was made in both 'net' and 'net-next'.
In the net/sched/sch_generic.c case a fix in 'net' happened at
the same time that a new argument was added to qdisc_hash_add().
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1a967d6c9b ("correctly to
anonymous authentication for the NTLM(v2) authentication") introduces
a regression in handling errors related to attempting a guest
connection to a Windows share which requires authentication. This
should result in a permission denied error but actually causes the
kernel module to enter a never-ending loop trying to follow a DFS
referal which doesn't exist.
The base cause of this is the failure now occurs later in the process
during tree connect and not at the session setup setup and all errors
in tree connect are interpreted as needing to follow the DFS paths
which isn't in this case correct. So, check the returned error against
EACCES and fail if this is returned error.
Feedback from Aurelien:
PS> net user guest /activate:no
PS> mkdir C:\guestshare
PS> icacls C:\guestshare /grant 'Everyone:(OI)(CI)F'
PS> new-smbshare -name guestshare -path C:\guestshare -fullaccess Everyone
I've tested v3.10, v4.4, master, master+your patch using default options
(empty or no user "NU") and user=abc (U).
NT_LOGON_FAILURE in session setup: LF
This is what you seem to have in 3.10.
NT_ACCESS_DENIED in tree connect to the share: AD
This is what you get before your infinite loop.
| NU U
--------------------------------
3.10 | LF LF
4.4 | LF LF
master | AD LF
master+patch | AD LF
No infinite DFS loop :(
All these issues result in mount failing very fast with permission denied.
I guess it could be from either the Windows version or the share/folder
ACL. A deeper analysis of the packets might reveal more.
In any case I did not notice any issues for on a basic DFS setup with
the patch so I don't think it introduced any regressions, which is
probably all that matters. It still bothers me a little I couldn't hit
the bug.
I've included kernel output w/ debugging output and network capture of
my tests if anyone want to have a look at it. (master+patch = ml-guestfix).
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
A signal can interrupt a SendReceive call which result in incoming
responses to the call being ignored. This is a problem for calls such as
open which results in the successful response being ignored. This
results in an open file resource on the server.
The patch looks into responses which were cancelled after being sent and
in case of successful open closes the open fids.
For this patch, the check is only done in SendReceive2()
RH-bz: 1403319
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: Stable <stable@vger.kernel.org>
There is an include loop between netdevice.h, dsa.h, devlink.h because
of NETDEV_ALIGN, making it impossible to use devlink structures in
dsa.h.
Break this loop by taking dsa.h out of netdevice.h, add a forward
declaration of dsa_switch_tree and netdev_set_default_ethtool_ops()
function, which is what netdevice.h requires.
No longer having dsa.h in netdevice.h means the includes in dsa.h no
longer get included. This breaks a few other files which depend on
these includes. Add these directly in the affected file.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SMB3 fixes from Steve French:
"Some small bug fixes as well as SMB2.1/SMB3 enablement for DFS (global
namespace) which previously was only enabled for CIFS"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
smb2: Enforce sec= mount option
CIFS: Fix sparse warnings
CIFS: implement get_dfs_refer for SMB2+
CIFS: use DFS pathnames in SMB2+ Create requests
CIFS: set signing flag in SMB2+ TreeConnect if needed
CIFS: let ses->ipc_tid hold smb2 TreeIds
CIFS: add use_ipc flag to SMB2_ioctl()
CIFS: add build_path_from_dentry_optional_prefix()
CIFS: move DFS response parsing out of SMB1 code
CIFS: Fix possible use after free in demultiplex thread
Pull sched.h split-up from Ingo Molnar:
"The point of these changes is to significantly reduce the
<linux/sched.h> header footprint, to speed up the kernel build and to
have a cleaner header structure.
After these changes the new <linux/sched.h>'s typical preprocessed
size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
lines), which is around 40% faster to build on typical configs.
Not much changed from the last version (-v2) posted three weeks ago: I
eliminated quirks, backmerged fixes plus I rebased it to an upstream
SHA1 from yesterday that includes most changes queued up in -next plus
all sched.h changes that were pending from Andrew.
I've re-tested the series both on x86 and on cross-arch defconfigs,
and did a bisectability test at a number of random points.
I tried to test as many build configurations as possible, but some
build breakage is probably still left - but it should be mostly
limited to architectures that have no cross-compiler binaries
available on kernel.org, and non-default configurations"
* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
sched/headers: Clean up <linux/sched.h>
sched/headers: Remove #ifdefs from <linux/sched.h>
sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
sched/core: Remove unused prefetch_stack()
sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
sched/headers: Remove <linux/signal.h> from <linux/sched.h>
sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
sched/headers: Remove the runqueue_is_locked() prototype
sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
...
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.
The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.
For SMB2, we also use ntlmv2 as a synonym for nltmssp.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
rcu_dereference_key() and user_key_payload() are currently being used in
two different, incompatible ways:
(1) As a wrapper to rcu_dereference() - when only the RCU read lock used
to protect the key.
(2) As a wrapper to rcu_dereference_protected() - when the key semaphor is
used to protect the key and the may be being modified.
Fix this by splitting both of the key wrappers to produce:
(1) RCU accessors for keys when caller has the key semaphore locked:
dereference_key_locked()
user_key_payload_locked()
(2) RCU accessors for keys when caller holds the RCU read lock:
dereference_key_rcu()
user_key_payload_rcu()
This should fix following warning in the NFS idmapper
===============================
[ INFO: suspicious RCU usage. ]
4.10.0 #1 Tainted: G W
-------------------------------
./include/keys/user-type.h:53 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 0
1 lock held by mount.nfs/5987:
#0: (rcu_read_lock){......}, at: [<d000000002527abc>] nfs_idmap_get_key+0x15c/0x420 [nfsv4]
stack backtrace:
CPU: 1 PID: 5987 Comm: mount.nfs Tainted: G W 4.10.0 #1
Call Trace:
dump_stack+0xe8/0x154 (unreliable)
lockdep_rcu_suspicious+0x140/0x190
nfs_idmap_get_key+0x380/0x420 [nfsv4]
nfs_map_name_to_uid+0x2a0/0x3b0 [nfsv4]
decode_getfattr_attrs+0xfac/0x16b0 [nfsv4]
decode_getfattr_generic.constprop.106+0xbc/0x150 [nfsv4]
nfs4_xdr_dec_lookup_root+0xac/0xb0 [nfsv4]
rpcauth_unwrap_resp+0xe8/0x140 [sunrpc]
call_decode+0x29c/0x910 [sunrpc]
__rpc_execute+0x140/0x8f0 [sunrpc]
rpc_run_task+0x170/0x200 [sunrpc]
nfs4_call_sync_sequence+0x68/0xa0 [nfsv4]
_nfs4_lookup_root.isra.44+0xd0/0xf0 [nfsv4]
nfs4_lookup_root+0xe0/0x350 [nfsv4]
nfs4_lookup_root_sec+0x70/0xa0 [nfsv4]
nfs4_find_root_sec+0xc4/0x100 [nfsv4]
nfs4_proc_get_rootfh+0x5c/0xf0 [nfsv4]
nfs4_get_rootfh+0x6c/0x190 [nfsv4]
nfs4_server_common_setup+0xc4/0x260 [nfsv4]
nfs4_create_server+0x278/0x3c0 [nfsv4]
nfs4_remote_mount+0x50/0xb0 [nfsv4]
mount_fs+0x74/0x210
vfs_kern_mount+0x78/0x220
nfs_do_root_mount+0xb0/0x140 [nfsv4]
nfs4_try_mount+0x60/0x100 [nfsv4]
nfs_fs_mount+0x5ec/0xda0 [nfs]
mount_fs+0x74/0x210
vfs_kern_mount+0x78/0x220
do_mount+0x254/0xf70
SyS_mount+0x94/0x100
system_call+0x38/0xe0
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
We need to recognize and parse transformed packets in demultiplex
thread to find a corresponsing mid and process it further.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This change allows to encrypt packets if it is required by a server
for SMB sessions or tree connections.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cifs fixes from Steve French:
"This ncludes various cifs/smb3 bug fixes, mostly for stable as well.
In the next week I expect that Germano will have some reconnection
fixes, and also I expect to have the remaining pieces of the snapshot
enablement and SMB3 ACLs, but wanted to get this set of bug fixes in"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs_get_root shouldn't use path with tree name
Fix default behaviour for empty domains and add domainauto option
cifs: use %16phN for formatting md5 sum
cifs: Fix smbencrypt() to stop pointing a scatterlist at the stack
CIFS: Fix a possible double locking of mutex during reconnect
CIFS: Fix a possible memory corruption during reconnect
CIFS: Fix a possible memory corruption in push locks
CIFS: Fix missing nls unload in smb2_reconnect()
CIFS: Decrease verbosity of ioctl call
SMB3: parsing for new snapshot timestamp mount parm
When a server returns the optional flag SMB_SHARE_IS_IN_DFS in response
to a tree connect, cifs_build_path_to_root() will return a pathname
which includes the hostname. This causes problems with cifs_get_root()
which separates each component and does a lookup for each component of
the path which in this case will incorrectly include looking up the
hostname component as a path component.
We encountered a problem with dfs shares hosted by a Netapp. When
connecting to nodes pointed to by the DFS share. The tree connect for
these nodes return SMB_SHARE_IS_IN_DFS resulting failures in lookup
in cifs_get_root().
RH bz: 1373153
The patch was tested against a Netapp simulator and by a user using an
actual Netapp server.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Reported-by: Pierguido Lambri <plambri@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With commit 2b149f119 many things have been fixed/introduced.
However, the default behaviour for RawNTLMSSP authentication
seems to be wrong in case the domain is not passed on the command line.
The main points (see below) of the patch are:
- It alignes behaviour with Windows clients
- It fixes backward compatibility
- It fixes UPN
I compared this behavour with the one from a Windows 10 command line
client. When no domains are specified on the command line, I traced
the packets and observed that the client does send an empty
domain to the server.
In the linux kernel case, the empty domain is replaced by the
primary domain communicated by the SMB server.
This means that, if the credentials are valid against the local server
but that server is part of a domain, then the kernel module will
ask to authenticate against that domain and we will get LOGON failure.
I compared the packet trace from the smbclient when no domain is passed
and, in that case, a default domain from the client smb.conf is taken.
Apparently, connection succeeds anyway, because when the domain passed
is not valid (in my case WORKGROUP), then the local one is tried and
authentication succeeds. I tried with any kind of invalid domain and
the result was always a connection.
So, trying to interpret what to do and picking a valid domain if none
is passed, seems the wrong thing to do.
To this end, a new option "domainauto" has been added in case the
user wants a mechanism for guessing.
Without this patch, backward compatibility also is broken.
With kernel 3.10, the default auth mechanism was NTLM.
One of our testing servers accepted NTLM and, because no
domains are passed, authentication was local.
Moving to RawNTLMSSP forced us to change our command line
to add a fake domain to pass to prevent this mechanism to kick in.
For the same reasons, UPN is broken because the domain is specified
in the username.
The SMB server will work out the domain from the UPN and authenticate
against the right server.
Without the patch, though, given the domain is empty, it gets replaced
with another domain that could be the wrong one for the authentication.
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Steve French
Steve French
Long Li
Ronnie Sahlberg
Aurelien Aptel
Colin Ian King
Shu Wang
Samuel Cabrero
Pavel Shilovsky
Linus Torvalds
Daniel N Pettersson
Sachin Prabhu
Jan Kara
David S. Miller
Mark Syms
Andrew Lunn
Ingo Molnar
David Howells
Germano Percossi