This is rather a hack to expose the current issue with rhashtable to
under high pressure sometimes return -ENOMEM even though system memory
is not exhausted and a consecutive insert may succeed.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
A maximum table size of 64k entries is insufficient for the multiple
threads test even in default configuration (10 threads * 50000 objects =
500000 objects in total). Since we know how many objects will be
inserted, calculate the max size unless overridden by parameter.
Note that specifying the exact number of objects upon table init won't
suffice as that value is being rounded down to the next power of two -
anticipate this by rounding up to the next power of two in beforehand.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adding cond_resched() calls to threadfunc(), a surprisingly high
rate of insert failures occurred probably due to table resizes getting a
better chance to run in background. To not soften up the remaining
tests, retry inserts until they either succeed or fail permanently.
Also change the non-threaded test to retry insert operations, too.
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This should fix for soft lockup bugs triggered on slow systems.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
After having tested insertion, lookup, table walk and removal, spawn a
number of threads running operations on the same rhashtable. Each of
them will:
1) insert it's own set of objects,
2) lookup every successfully inserted object and finally
3) remove objects in several rounds until all of them have been removed,
making sure the remaining ones are still found after each round.
This should put a good amount of load onto the system and due to
synchronising thread startup via two semaphores also extensive
concurrent table access.
The default number of ten threads returned within half a second on my
local VM with two cores. Running 200 threads took about four seconds. If
slow systems suffer too much from this though, the default could be
lowered or even set to zero so this extended test does not run at all by
default.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending on system speed, the large lookup/insert/delete loops of the testsuite can
take a considerable amount of time to complete causing watchdog warnings to appear.
Allow other tasks to be scheduled throughout the loops.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A 64bit division went in unnoticed. Use do_div() to accomodate
non 64bit architectures.
Reported-by: kbuild test robot
Fixes: 1aa661f5c3 ("rhashtable-test: Measure time to insert, remove & traverse entries")
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Account for failed inserts due to memory pressure or EBUSY and
ignore failed entries during the consistency check.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As resizes may continue to run in the background, use walker to
ensure we see all entries. Also print the encountered number
of rehashes queued up while traversing.
This may lead to warnings due to entries being seen multiple
times. We consider them non-fatal.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
By far the most expensive part of the selftest was the allocation
of entries. Using a static array allows to measure the rhashtable
operations.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This only blows up the size of the test structure for no gain
in test coverage. Reduces size of test_obj from 24 to 16 bytes.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make test configurable by allowing to specify all relevant knobs
through module parameters.
Do several test runs and measure the average time it takes to
insert & remove all entries. Note, a deferred resize might still
continue to run in the background.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that resizing is completely automatic, we need to remove
the max_size setting or the test will fail.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing bits to allow multiple rehashes. The
read-side as well as remove already handle this correctly. So it's
only the rehasher and insertion that need modification to handle
this.
Note that this patch doesn't actually enable it so for now rehashing
is still only performed by the worker thread.
This patch also disables the explicit expand/shrink interface because
the table is meant to expand and shrink automatically, and continuing
to export these interfaces unnecessarily complicates the life of the
rehasher since the rehash process is now composed of two parts.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts test_rhashtable to the inlined rhashtable
interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch converts test_rhashtable to use rhashtable max_size
instead of the obsolete max_shift.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a rehash counter to bucket_table to indicate
the last bucket that has been rehashed. This serves two purposes:
1. Any bucket that has been rehashed can never gain a new object.
2. If the rehash counter reaches the size of the table, the table
will forever remain empty.
This patch also downsizes bucket_table->size to an unsigned int
since we do not support sizes greater than 32 bits yet.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all real users of rhashtable default their grow and shrink
decision functions to rht_grow_above_75() and rht_shrink_below_30(),
so that there's currently no need to have this explicitly selectable.
It can/should be generic and private inside rhashtable until a real
use case pops up. Since we can make this private, we'll save us this
additional indirection layer and can improve insertion/deletion time
as well.
Reference: http://patchwork.ozlabs.org/patch/443040/
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
While commit c0c09bfdc4 ("rhashtable: avoid unnecessary wakeup for
worker queue") rightfully moved part of the decision making of
whether we should expand or shrink from the expand/shrink functions
themselves into insert/delete functions in order to avoid unnecessary
worker wake-ups, it however introduced a regression by doing so.
Before that change, if no max_shift was specified (= 0) on rhashtable
initialization, rhashtable_expand() would just grow unconditionally
and lets the available memory be the limiting factor. After that
change, if no max_shift was specified, there would be _no_ expansion
step at all.
Given that netlink and tipc have a max_shift specified, it was not
visible there, but Josh Hunt reported that if nft that starts out
with a default element hint of 3 if not otherwise provided, would
slow i.e. inserts down trememdously as it cannot grow larger to
relax table occupancy.
Given that the test case verifies shrinks/expands manually, we also
must remove pointer to the helper functions to explicitly avoid
parallel resizing on insertions/deletions. test_bucket_stats() and
test_rht_lookup() could also be wrapped around rhashtable mutex to
explicitly synchronize a walk from resizing, but I think that defeats
the actual test case which intended to have explicit test steps,
i.e. 1) inserts, 2) expands, 3) shrinks, 4) deletions, with object
verification after each stage.
Reported-by: Josh Hunt <johunt@akamai.com>
Fixes: c0c09bfdc4 ("rhashtable: avoid unnecessary wakeup for worker queue")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Josh Hunt <johunt@akamai.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's no good reason why to disallow unloading of the rhashtable
test case module.
Commit 9d6dbe1bba moved the code from a boot test into a stand-alone
module, but only converted the subsys_initcall() handler into a
module_init() function without a related exit handler, and thus
preventing the test module from unloading.
Fixes: 9d6dbe1bba ("rhashtable: Make selftest modular")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
With object runtime debugging enabled, the rhashtable test suite
will rightfully throw a warning "ODEBUG: object is on stack, but
not annotated" from rhashtable_init().
This is because run_work is (correctly) being initialized via
INIT_WORK(), and not annotated by INIT_WORK_ONSTACK(). Meaning,
rhashtable_init() is okay as is, we just need to move ht e.g.,
into global scope.
It never triggered anything, since test_rhashtable is rather a
controlled environment and effectively runs to completion, so
that stack memory is not vanishing underneath us, we shouldn't
confuse any testers with it though.
Fixes: 7e1e77636e ("lib: Resizable, Scalable, Concurrent Hash Table")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the selftest on the resizable hash table to be built modular, just
like all other tests that do not depend on DEBUG_KERNEL.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter
Thomas Graf
Herbert Xu
Daniel Borkmann
Geert Uytterhoeven