Граф коммитов

141 Коммитов

Автор SHA1 Сообщение Дата
Christoph Hellwig 64b36075eb block: split elevator_switch
Split an elevator_disable helper from elevator_switch for the case where
we want to switch to no scheduler at all.  This includes removing the
pointless elevator_switch_mq helper and removing the switch to no
schedule logic from blk_mq_init_sched.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221030100714.876891-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-01 09:12:24 -06:00
Jinlong Chen 8ed40ee35d block: fix up elevator_type refcounting
The current reference management logic of io scheduler modules contains
refcnt problems. For example, blk_mq_init_sched may fail before or after
the calling of e->ops.init_sched. If it fails before the calling, it does
nothing to the reference to the io scheduler module. But if it fails after
the calling, it releases the reference by calling kobject_put(&eq->kobj).

As the callers of blk_mq_init_sched can't know exactly where the failure
happens, they can't handle the reference to the io scheduler module
properly: releasing the reference on failure results in double-release if
blk_mq_init_sched has released it, and not releasing the reference results
in ghost reference if blk_mq_init_sched did not release it either.

The same problem also exists in io schedulers' init_sched implementations.

We can address the problem by adding releasing statements to the error
handling procedures of blk_mq_init_sched and init_sched implementations.
But that is counterintuitive and requires modifications to existing io
schedulers.

Instead, We make elevator_alloc get the io scheduler module references
that will be released by elevator_release. And then, we match each
elevator_get with an elevator_put. Therefore, each reference to an io
scheduler module explicitly has its own getter and releaser, and we no
longer need to worry about the refcnt problems.

The bugs and the patch can be validated with tools here:
https://github.com/nickyc975/linux_elv_refcnt_bug.git

[hch: split out a few bits into separate patches, use a non-try
      module_get in elevator_alloc]

Signed-off-by: Jinlong Chen <nickyc975@zju.edu.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020064819.1469928-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-23 18:59:17 -06:00
Christoph Hellwig 5cf9c91ba9 block: serialize all debugfs operations using q->debugfs_mutex
Various places like I/O schedulers or the QOS infrastructure try to
register debugfs files on demans, which can race with creating and
removing the main queue debugfs directory.  Use the existing
debugfs_mutex to serialize all debugfs operations that rely on
q->debugfs_dir or the directories hanging off it.

To make the teardown code a little simpler declare all debugfs dentry
pointers and not just the main one uncoditionally in blkdev.h.

Move debugfs_mutex next to the dentries that it protects and document
what it is used for.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220614074827.458955-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-17 07:31:05 -06:00
Ming Lei 4d337cebcb blk-mq: avoid to touch q->elevator without any protection
q->elevator is referred in blk_mq_has_sqsched() without any protection,
no .q_usage_counter is held, no queue srcu and rcu read lock is held,
so potential use-after-free may be triggered.

Fix the issue by adding one queue flag for checking if the elevator
uses single queue style dispatch. Meantime the elevator feature flag
of ELEVATOR_F_MQ_AWARE isn't needed any more.

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-16 14:45:15 -06:00
Shin'ichiro Kawasaki 572299f03a block: limit request dispatch loop duration
When IO requests are made continuously and the target block device
handles requests faster than request arrival, the request dispatch loop
keeps on repeating to dispatch the arriving requests very long time,
more than a minute. Since the loop runs as a workqueue worker task, the
very long loop duration triggers workqueue watchdog timeout and BUG [1].

To avoid the very long loop duration, break the loop periodically. When
opportunity to dispatch requests still exists, check need_resched(). If
need_resched() returns true, the dispatch loop already consumed its time
slice, then reschedule the dispatch work and break the loop. With heavy
IO load, need_resched() does not return true for 20~30 seconds. To cover
such case, check time spent in the dispatch loop with jiffies. If more
than 1 second is spent, reschedule the dispatch work and break the loop.

[1]

[  609.691437] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 35s!
[  609.701820] Showing busy workqueues and worker pools:
[  609.707915] workqueue events: flags=0x0
[  609.712615]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[  609.712626]     pending: drm_fb_helper_damage_work [drm_kms_helper]
[  609.712687] workqueue events_freezable: flags=0x4
[  609.732943]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[  609.732952]     pending: pci_pme_list_scan
[  609.732968] workqueue events_power_efficient: flags=0x80
[  609.751947]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[  609.751955]     pending: neigh_managed_work
[  609.752018] workqueue kblockd: flags=0x18
[  609.769480]   pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4
[  609.769488]     in-flight: 1020:blk_mq_run_work_fn
[  609.769498]     pending: blk_mq_timeout_work, blk_mq_run_work_fn
[  609.769744] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=35s workers=2 idle: 67
[  639.899730] BUG: workqueue lockup - pool cpus=10 node=1 flags=0x0 nice=-20 stuck for 66s!
[  639.909513] Showing busy workqueues and worker pools:
[  639.915404] workqueue events: flags=0x0
[  639.920197]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 refcnt=2
[  639.920215]     pending: drm_fb_helper_damage_work [drm_kms_helper]
[  639.920365] workqueue kblockd: flags=0x18
[  639.939932]   pwq 21: cpus=10 node=1 flags=0x0 nice=-20 active=3/256 refcnt=4
[  639.939942]     in-flight: 1020:blk_mq_run_work_fn
[  639.939955]     pending: blk_mq_timeout_work, blk_mq_run_work_fn
[  639.940212] pool 21: cpus=10 node=1 flags=0x0 nice=-20 hung=66s workers=2 idle: 67

Fixes: 6e6fcbc27e ("blk-mq: support batching dispatch in case of io")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lore.kernel.org/linux-block/20220310091649.zypaem5lkyfadymg@shindev/
Link: https://lore.kernel.org/r/20220318022641.133484-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-17 20:31:43 -06:00
Ming Lei 4f48120874 blk-mq: prepare for implementing hctx table via xarray
It is inevitable to cause use-after-free on q->queue_hw_ctx between
queue_for_each_hw_ctx() and blk_mq_update_nr_hw_queues(). And converting
to xarray can fix the uaf, meantime code gets cleaner.

Prepare for converting q->queue_hctx_ctx into xarray, one thing is that
xa_for_each() can only accept 'unsigned long' as index, so changes type
of hctx index of queue_for_each_hw_ctx() into 'unsigned long'.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220308073219.91173-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-08 17:57:19 -07:00
Ming Lei 4cafe86c92 blk-mq: run dispatch lock once in case of issuing from list
It isn't necessary to call blk_mq_run_dispatch_ops() once for issuing
single request directly, and enough to do it one time when issuing from
whole list.

Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211203131534.3668411-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-12-03 14:51:29 -07:00
Christoph Hellwig 87dd1d63dc block: move blk_mq_sched_assign_ioc to blk-ioc.c
Move blk_mq_sched_assign_ioc so that many interfaces from the file can
be marked static.  Rename the function to ioc_find_get_icq as well and
return the icq to simplify the interface.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211126115817.2087431-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:41:29 -07:00
Christoph Hellwig c2a32464f4 Revert "block: Provide blk_mq_sched_get_icq()"
This reverts commit 4896c4e64ba5d5d5acdbcf68c5910dd4f6d8fa62.

The helper is not needed any more.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211126115817.2087431-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:41:29 -07:00
Jan Kara 790cf9c848 block: Provide blk_mq_sched_get_icq()
Currently we lookup ICQ only after the request is allocated. However BFQ
will want to decide how many scheduler tags it allows a given bfq queue
(effectively a process) to consume based on cgroup weight. So provide a
function blk_mq_sched_get_icq() so that BFQ can lookup ICQ earlier.

Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20211125133645.27483-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:38:51 -07:00
Jens Axboe 5a9d041ba2 block: move io_context creation into where it's needed
The only user of the io_context for IO is BFQ, yet we put the checking
and logic of it into the normal IO path.

Put the creation into blk_mq_sched_assign_ioc(), and have BFQ use that
helper.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-29 06:38:44 -07:00
Ming Lei 10f7335e36 blk-mq: don't grab ->q_usage_counter in blk_mq_sched_bio_merge
blk_mq_sched_bio_merge is only called from blk-mq.c:blk_attempt_bio_merge(),
which is called when queue usage counter is grabbed already:

1) blk_mq_get_new_requests()

2) blk_mq_get_request()
- cached request in current plug owns one queue usage counter

So don't grab ->q_usage_counter in blk_mq_sched_bio_merge(), and more
importantly this nest way causes hang in blk_mq_freeze_queue_wait().

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211111085134.345235-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-11 11:52:33 -07:00
Jens Axboe 900e080752 block: move queue enter logic into blk_mq_submit_bio()
Retain the old logic for the fops based submit, but for our internal
blk_mq_submit_bio(), move the queue entering logic into the core
function itself.

We need to be a bit careful if going into the scheduler, as a scheduler
or queue mappings can arbitrarily change before we have entered the queue.
Have the bio scheduler mapping do that separately, it's a very cheap
operation compared to actually doing merging locking and lookups.

Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: update to check merge post submit_bio_checks() doing remap...]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-04 23:20:10 -06:00
Jean Sacren ef1661ba6d blk-mq: fix redundant check of !e expression
In the if branch, e is checked.  In the else branch, ->dispatch_busy is
merely a number and has no effect on !e.  We should remove the check of
!e since it is always true.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Link: https://lore.kernel.org/r/20211029202945.3052-1-sakiwit@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-30 09:34:14 -06:00
John Garry 8bdf7b3fe1 blk-mq-sched: Don't reference queue tagset in blk_mq_sched_tags_teardown()
We should not reference the queue tagset in blk_mq_sched_tags_teardown()
(see function comment) for the blk-mq flags, so use the passed flags
instead.

This solves a use-after-free, similarly fixed earlier (and since broken
again) in commit f0c1c4d286 ("blk-mq: fix use-after-free in
blk_mq_exit_sched").

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: e155b0c238 ("blk-mq: Use shared tags for shared sbitmap support")
Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1634890340-15432-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22 09:16:12 -06:00
Pavel Begunkov 179ae84f7e block: clean up blk_mq_submit_bio() merging
Combine blk_mq_sched_bio_merge() and blk_attempt_plug_merge() under a
common if, so we don't check it twice.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/daedc90d4029a5d1d73344771632b1faca3aaf81.1634755800.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21 08:27:17 -06:00
Jens Axboe 9a14d6ce41 block: remove debugfs blk_mq_ctx dispatched/merged/completed attributes
These were added as part of early days debugging for blk-mq, and they
are not really useful anymore. Rather than spend cycles updating them,
just get rid of them.

As a bonus, this shrinks the per-cpu software queue size from 256b
to 192b. That's a whole cacheline less.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:39:48 -06:00
Pavel Begunkov e9ea15963f blk-mq: inline hot part of __blk_mq_sched_restart
Extract a fast check out of __block_mq_sched_restart() and inline it for
performance reasons.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/894abaa0998e5999f2fe18f271e5efdfc2c32bd2.1633781740.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:34 -06:00
John Garry 079a2e3e86 blk-mq: Change shared sbitmap naming to shared tags
Now that shared sbitmap support really means shared tags, rename symbols
to match that.

Signed-off-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1633429419-228500-15-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry e155b0c238 blk-mq: Use shared tags for shared sbitmap support
Currently we use separate sbitmap pairs and active_queues atomic_t for
shared sbitmap support.

However a full sets of static requests are used per HW queue, which is
quite wasteful, considering that the total number of requests usable at
any given time across all HW queues is limited by the shared sbitmap depth.

As such, it is considerably more memory efficient in the case of shared
sbitmap to allocate a set of static rqs per tag set or request queue, and
not per HW queue.

So replace the sbitmap pairs and active_queues atomic_t with a shared
tags per tagset and request queue, which will hold a set of shared static
rqs.

Since there is now no valid HW queue index to be passed to the blk_mq_ops
.init and .exit_request callbacks, pass an invalid index token. This
changes the semantics of the APIs, such that the callback would need to
validate the HW queue index before using it. Currently no user of shared
sbitmap actually uses the HW queue index (as would be expected).

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-13-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry 63064be150 blk-mq: Add blk_mq_alloc_map_and_rqs()
Add a function to combine allocating tags and the associated requests,
and factor out common patterns to use this new function.

Some function only call blk_mq_alloc_map_and_rqs() now, but more
functionality will be added later.

Also make blk_mq_alloc_rq_map() and blk_mq_alloc_rqs() static since they
are only used in blk-mq.c, and finally rename some functions for
conciseness and consistency with other function names:
- __blk_mq_alloc_map_and_{request -> rqs}()
- blk_mq_alloc_{map_and_requests -> set_map_and_rqs}()

Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-11-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:03 -06:00
John Garry a7e7388dce blk-mq: Add blk_mq_tag_update_sched_shared_sbitmap()
Put the functionality to update the sched shared sbitmap size in a common
function.

Since the same formula is always used to resize, and it can be got from
the request queue argument, so just pass the request queue pointer.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/1633429419-228500-10-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
John Garry 1820f4f0a5 blk-mq-sched: Rename blk_mq_sched_free_{requests -> rqs}()
To be more concise and consistent in naming, rename
blk_mq_sched_free_requests() -> blk_mq_sched_free_rqs().

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1633429419-228500-7-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
John Garry d99a6bb337 blk-mq-sched: Rename blk_mq_sched_alloc_{tags -> map_and_rqs}()
Function blk_mq_sched_alloc_tags() does same as
__blk_mq_alloc_map_and_request(), so give a similar name to be consistent.

Similarly rename label err_free_tags -> err_free_map_and_rqs.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/1633429419-228500-6-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
John Garry d2a27964e6 block: Rename BLKDEV_MAX_RQ -> BLKDEV_DEFAULT_RQ
It is a bit confusing that there is BLKDEV_MAX_RQ and MAX_SCHED_RQ, as
the name BLKDEV_MAX_RQ would imply the max requests always, which it is
not.

Rename to BLKDEV_MAX_RQ to BLKDEV_DEFAULT_RQ, matching its usage - that being
the default number of requests assigned when allocating a request queue.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/1633429419-228500-3-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
John Garry b93af3055d blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling
If the blk_mq_sched_alloc_tags() -> blk_mq_alloc_rqs() call fails, then we
call blk_mq_sched_free_tags() -> blk_mq_free_rqs().

It is incorrect to do so, as any rqs would have already been freed in the
blk_mq_alloc_rqs() call.

Fix by calling blk_mq_free_rq_map() only directly.

Fixes: 6917ff0b5b ("blk-mq-sched: refactor scheduler initialization")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1627378373-148090-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-07-27 16:44:38 -06:00
Jan Kara fd2ef39cc9 blk: Fix lock inversion between ioc lock and bfqd lock
Lockdep complains about lock inversion between ioc->lock and bfqd->lock:

bfqd -> ioc:
 put_io_context+0x33/0x90 -> ioc->lock grabbed
 blk_mq_free_request+0x51/0x140
 blk_put_request+0xe/0x10
 blk_attempt_req_merge+0x1d/0x30
 elv_attempt_insert_merge+0x56/0xa0
 blk_mq_sched_try_insert_merge+0x4b/0x60
 bfq_insert_requests+0x9e/0x18c0 -> bfqd->lock grabbed
 blk_mq_sched_insert_requests+0xd6/0x2b0
 blk_mq_flush_plug_list+0x154/0x280
 blk_finish_plug+0x40/0x60
 ext4_writepages+0x696/0x1320
 do_writepages+0x1c/0x80
 __filemap_fdatawrite_range+0xd7/0x120
 sync_file_range+0xac/0xf0

ioc->bfqd:
 bfq_exit_icq+0xa3/0xe0 -> bfqd->lock grabbed
 put_io_context_active+0x78/0xb0 -> ioc->lock grabbed
 exit_io_context+0x48/0x50
 do_exit+0x7e9/0xdd0
 do_group_exit+0x54/0xc0

To avoid this inversion we change blk_mq_sched_try_insert_merge() to not
free the merged request but rather leave that upto the caller similarly
to blk_mq_sched_try_merge(). And in bfq_insert_requests() we make sure
to free all the merged requests after dropping bfqd->lock.

Fixes: aee69d78de ("block, bfq: introduce the BFQ-v0 I/O scheduler as an extra scheduler")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210623093634.27879-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-24 18:43:55 -06:00
Damien Le Moal e42cfb1da0 block: Remove unnecessary elevator operation checks
The insert_requests and dispatch_request elevator operations are
mandatory for the correct execution of an elevator, and all implemented
elevators (bfq, kyber and mq-deadline) implement them. As a result,
there is no need to check for these operations before calling them when
a queue has an elevator set. This simplifies the code in
__blk_mq_sched_dispatch_requests() and blk_mq_sched_insert_request().

To avoid out-of-tree elevators to crash the kernel in case of bad
implementation, add a check in elv_register() to verify that these
operations are implemented.

A small, probably not significant, IOPS improvement of 0.1% is observed
with this patch applied (4.117 MIOPS to 4.123 MIOPS, average of 20 fio
runs doing 4K random direct reads with psync and 32 jobs).

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210618015922.713999-1-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-18 08:51:48 -06:00
Ming Lei f0c1c4d286 blk-mq: fix use-after-free in blk_mq_exit_sched
tagset can't be used after blk_cleanup_queue() is returned because
freeing tagset usually follows blk_clenup_queue(). Commit d97e594c51
("blk-mq: Use request queue-wide tags for tagset-wide sbitmap") adds
check on q->tag_set->flags in blk_mq_exit_sched(), and causes
use-after-free.

Fixes it by using hctx->flags.

Reported-by: syzbot+77ba3d171a25c56756ea@syzkaller.appspotmail.com
Fixes: d97e594c51 ("blk-mq: Use request queue-wide tags for tagset-wide sbitmap")
Cc: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20210609063046.122843-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-18 08:50:13 -06:00
Jan Kara 613471549f block: Do not pull requests from the scheduler when we cannot dispatch them
Provided the device driver does not implement dispatch budget accounting
(which only SCSI does) the loop in __blk_mq_do_dispatch_sched() pulls
requests from the IO scheduler as long as it is willing to give out any.
That defeats scheduling heuristics inside the scheduler by creating
false impression that the device can take more IO when it in fact
cannot.

For example with BFQ IO scheduler on top of virtio-blk device setting
blkio cgroup weight has barely any impact on observed throughput of
async IO because __blk_mq_do_dispatch_sched() always sucks out all the
IO queued in BFQ. BFQ first submits IO from higher weight cgroups but
when that is all dispatched, it will give out IO of lower weight cgroups
as well. And then we have to wait for all this IO to be dispatched to
the disk (which means lot of it actually has to complete) before the
IO scheduler is queried again for dispatching more requests. This
completely destroys any service differentiation.

So grab request tag for a request pulled out of the IO scheduler already
in __blk_mq_do_dispatch_sched() and do not pull any more requests if we
cannot get it because we are unlikely to be able to dispatch it. That
way only single request is going to wait in the dispatch list for some
tag to free.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210603104721.6309-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-03 12:01:27 -06:00
John Garry d97e594c51 blk-mq: Use request queue-wide tags for tagset-wide sbitmap
The tags used for an IO scheduler are currently per hctx.

As such, when q->nr_hw_queues grows, so does the request queue total IO
scheduler tag depth.

This may cause problems for SCSI MQ HBAs whose total driver depth is
fixed.

Ming and Yanhui report higher CPU usage and lower throughput in scenarios
where the fixed total driver tag depth is appreciably lower than the total
scheduler tag depth:
https://lore.kernel.org/linux-block/440dfcfc-1a2c-bd98-1161-cec4d78c6dfc@huawei.com/T/#mc0d6d4f95275a2743d1c8c3e4dc9ff6c9aa3a76b

In that scenario, since the scheduler tag is got first, much contention
is introduced since a driver tag may not be available after we have got
the sched tag.

Improve this scenario by introducing request queue-wide tags for when
a tagset-wide sbitmap is used. The static sched requests are still
allocated per hctx, as requests are initialised per hctx, as in
blk_mq_init_request(..., hctx_idx, ...) ->
set->ops->init_request(.., hctx_idx, ...).

For simplicity of resizing the request queue sbitmap when updating the
request queue depth, just init at the max possible size, so we don't need
to deal with the possibly with swapping out a new sbitmap for old if
we need to grow.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1620907258-30910-3-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-24 06:47:22 -06:00
Omar Sandoval efed9a3337 kyber: fix out of bounds access when preempted
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).

This manifested as this UBSAN array index out of bounds error reported
by Jakub:

UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
 dump_stack+0xa4/0xe5
 ubsan_epilogue+0x5/0x40
 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
 queued_spin_lock_slowpath+0x476/0x480
 do_raw_spin_lock+0x1c2/0x1d0
 kyber_bio_merge+0x112/0x180
 blk_mq_submit_bio+0x1f5/0x1100
 submit_bio_noacct+0x7b0/0x870
 submit_bio+0xc2/0x3a0
 btrfs_map_bio+0x4f0/0x9d0
 btrfs_submit_data_bio+0x24e/0x310
 submit_one_bio+0x7f/0xb0
 submit_extent_page+0xc4/0x440
 __extent_writepage_io+0x2b8/0x5e0
 __extent_writepage+0x28d/0x6e0
 extent_write_cache_pages+0x4d7/0x7a0
 extent_writepages+0xa2/0x110
 do_writepages+0x8f/0x180
 __writeback_single_inode+0x99/0x7f0
 writeback_sb_inodes+0x34e/0x790
 __writeback_inodes_wb+0x9e/0x120
 wb_writeback+0x4d2/0x660
 wb_workfn+0x64d/0xa10
 process_one_work+0x53a/0xa80
 worker_thread+0x69/0x5b0
 kthread+0x20b/0x240
 ret_from_fork+0x1f/0x30

Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.

Fixes: a6088845c2 ("block: kyber: make kyber more friendly with merging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-11 08:12:14 -06:00
Linus Torvalds d72cd4ad41 SCSI misc on 20210428
This series consists of the usual driver updates (ufs, target, tcmu,
 smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).  The major core
 change is using a sbitmap instead of an atomic for queue tracking.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYInvqCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYh2AP0SgqqL
 WYZRT2oiyBOKD28v+ceOSiXvgjPlqABwVMC0BAEAn29/wNCxyvzZ1k/b0iPJ4M+S
 klkSxLzXKQLzJBgdK5w=
 =p5B/
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, target, tcmu,
  smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).

  The major core change is using a sbitmap instead of an atomic for
  queue tracking"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
  scsi: target: tcm_fc: Fix a kernel-doc header
  scsi: target: Shorten ALUA error messages
  scsi: target: Fix two format specifiers
  scsi: target: Compare explicitly with SAM_STAT_GOOD
  scsi: sd: Introduce a new local variable in sd_check_events()
  scsi: dc395x: Open-code status_byte(u8) calls
  scsi: 53c700: Open-code status_byte(u8) calls
  scsi: smartpqi: Remove unused functions
  scsi: qla4xxx: Remove an unused function
  scsi: myrs: Remove unused functions
  scsi: myrb: Remove unused functions
  scsi: mpt3sas: Fix two kernel-doc headers
  scsi: fcoe: Suppress a compiler warning
  scsi: libfc: Fix a format specifier
  scsi: aacraid: Remove an unused function
  scsi: core: Introduce enum scsi_disposition
  scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
  scsi: core: Rename scsi_softirq_done() into scsi_complete()
  scsi: core: Remove an incorrect comment
  scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
  ...
2021-04-28 17:22:10 -07:00
Sami Tolvanen 4f0f586bf0 treewide: Change list_sort to use const pointers
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.

Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
2021-04-08 16:04:22 -07:00
Ming Lei 2a5a24aa83 scsi: blk-mq: Return budget token from .get_budget callback
SCSI uses a global atomic variable to track queue depth for each
LUN/request queue.

This doesn't scale well when there are lots of CPU cores and the disk is
very fast. It has been observed that IOPS is affected a lot by tracking
queue depth via sdev->device_busy in the I/O path.

Return budget token from .get_budget callback. The budget token can be
passed to driver so that we can replace the atomic variable with
sbitmap_queue and alleviate the scaling problems that way.

Link: https://lore.kernel.org/r/20210122023317.687987-9-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:36:59 -05:00
Jean Delvare 5218e12e9f block: Drop leftover references to RQF_SORTED
Commit a1ce35fa49 ("block: remove dead
elevator code") removed all users of RQF_SORTED. However it is still
defined, and there is one reference left to it (which in effect is
dead code). Clear it all up.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-01 10:15:07 -07:00
Chaitanya Kulkarni b357e4a694 block: get rid of the trace rq insert wrapper
Get rid of the wrapper for trace_block_rq_insert() and call the function
directly.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-22 06:37:41 -07:00
Christoph Hellwig a54895fa05 block: remove the request_queue to argument request based tracepoints
The request_queue can trivially be derived from the request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-04 09:42:00 -07:00
Yufen Yu c728152413 blk-mq: get rid of the dead flush handle code path
After commit 923218f616 ("blk-mq: don't allocate driver tag upfront
for flush rq"), blk_mq_submit_bio() will call blk_insert_flush()
directly to handle flush request rather than blk_mq_sched_insert_request()
in the case of elevator.

Then, all flush request either have set RQF_FLUSH_SEQ flag when call
blk_mq_sched_insert_request(), or have inserted into hctx->dispatch.
So, remove the dead code path.

Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09 12:35:39 -06:00
Christoph Hellwig eda5cc997a block: move blk_mq_sched_try_merge to blk-merge.c
Move blk_mq_sched_try_merge to blk-merge.c, which allows to mark
a lot of the merge infrastructure static there.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-06 07:29:53 -06:00
Baolin Wang ddfb8b0bed block: Remove unused blk_mq_sched_free_hctx_data()
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(),
and no users will use blk_mq_sched_free_hctx_data() function.
Remove it.

Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-07 20:11:15 -06:00
John Garry 32bc15afed blk-mq: Facilitate a shared sbitmap per tagset
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.

In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec060
("blk-mq: drain I/O when all CPUs in a hctx are offline").

However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.

In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.

However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092 ("scsi:
 core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.

To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.

New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.

Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.

This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].

[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be

Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-03 15:20:47 -06:00
John Garry 1c0706a70a blk-mq: Pass flags for tag init/free
Pass hctx/tagset flags argument down to blk_mq_init_tags() and
blk_mq_free_tags() for selective init/free.

For now, make it include the alloc policy flag, which can be evaluated
when needed (in blk_mq_init_tags()).

Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-03 15:20:46 -06:00
Xianting Tian e44a6a2359 blk-mq: use BLK_MQ_NO_TAG for no tag
Replace various magic -1 constants for tags with BLK_MQ_NO_TAG.

Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 16:49:26 -06:00
Baolin Wang cdfcef9ee8 block: Remove blk_mq_attempt_merge() function
The small blk_mq_attempt_merge() function is only called by
__blk_mq_sched_bio_merge(), just open code it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 16:49:26 -06:00
Baolin Wang 7d7ca7c526 block: Add a new helper to attempt to merge a bio
There are lots of duplicated code when trying to merge a bio from
plug list and sw queue, we can introduce a new helper to attempt
to merge a bio, which can simplify the blk_bio_list_merge()
and blk_attempt_plug_merge().

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 16:49:26 -06:00
Baolin Wang bdc6a287bc block: Move blk_mq_bio_list_merge() into blk-merge.c
Move the blk_mq_bio_list_merge() into blk-merge.c and
rename it as a generic name.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-01 16:49:26 -06:00
Ming Lei d7d8535f37 blk-mq: order adding requests to hctx->dispatch and checking SCHED_RESTART
SCHED_RESTART code path is relied to re-run queue for dispatch requests
in hctx->dispatch. Meantime the SCHED_RSTART flag is checked when adding
requests to hctx->dispatch.

memory barriers have to be used for ordering the following two pair of OPs:

1) adding requests to hctx->dispatch and checking SCHED_RESTART in
blk_mq_dispatch_rq_list()

2) clearing SCHED_RESTART and checking if there is request in hctx->dispatch
in blk_mq_sched_restart().

Without the added memory barrier, either:

1) blk_mq_sched_restart() may miss requests added to hctx->dispatch meantime
blk_mq_dispatch_rq_list() observes SCHED_RESTART, and not run queue in
dispatch side

or

2) blk_mq_dispatch_rq_list still sees SCHED_RESTART, and not run queue
in dispatch side, meantime checking if there is request in
hctx->dispatch from blk_mq_sched_restart() is missed.

IO hang in ltp/fs_fill test is reported by kernel test robot:

	https://lkml.org/lkml/2020/7/26/77

Turns out it is caused by the above out-of-order OPs. And the IO hang
can't be observed any more after applying this patch.

Fixes: bd166ef183 ("blk-mq-sched: add framework for MQ capable IO schedulers")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-17 06:57:49 -07:00
Randy Dunlap c4aecaa256 block: blk-mq-sched: delete duplicated word
Drop the repeated word "to".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-31 16:29:47 -06:00
Baolin Wang 106e71c512 blk-mq: Remove unnecessary local variable
Remove unnecessary local variable 'ret' in blk_mq_dispatch_hctx_list().

Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-10 07:58:09 -06:00