Pull x86 mm changes from Ingo Molnar:
"PCID support, 5-level paging support, Secure Memory Encryption support
The main changes in this cycle are support for three new, complex
hardware features of x86 CPUs:
- Add 5-level paging support, which is a new hardware feature on
upcoming Intel CPUs allowing up to 128 PB of virtual address space
and 4 PB of physical RAM space - a 512-fold increase over the old
limits. (Supercomputers of the future forecasting hurricanes on an
ever warming planet can certainly make good use of more RAM.)
Many of the necessary changes went upstream in previous cycles,
v4.14 is the first kernel that can enable 5-level paging.
This feature is activated via CONFIG_X86_5LEVEL=y - disabled by
default.
(By Kirill A. Shutemov)
- Add 'encrypted memory' support, which is a new hardware feature on
upcoming AMD CPUs ('Secure Memory Encryption', SME) allowing system
RAM to be encrypted and decrypted (mostly) transparently by the
CPU, with a little help from the kernel to transition to/from
encrypted RAM. Such RAM should be more secure against various
attacks like RAM access via the memory bus and should make the
radio signature of memory bus traffic harder to intercept (and
decrypt) as well.
This feature is activated via CONFIG_AMD_MEM_ENCRYPT=y - disabled
by default.
(By Tom Lendacky)
- Enable PCID optimized TLB flushing on newer Intel CPUs: PCID is a
hardware feature that attaches an address space tag to TLB entries
and thus allows to skip TLB flushing in many cases, even if we
switch mm's.
(By Andy Lutomirski)
All three of these features were in the works for a long time, and
it's coincidence of the three independent development paths that they
are all enabled in v4.14 at once"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (65 commits)
x86/mm: Enable RCU based page table freeing (CONFIG_HAVE_RCU_TABLE_FREE=y)
x86/mm: Use pr_cont() in dump_pagetable()
x86/mm: Fix SME encryption stack ptr handling
kvm/x86: Avoid clearing the C-bit in rsvd_bits()
x86/CPU: Align CR3 defines
x86/mm, mm/hwpoison: Clear PRESENT bit for kernel 1:1 mappings of poison pages
acpi, x86/mm: Remove encryption mask from ACPI page protection type
x86/mm, kexec: Fix memory corruption with SME on successive kexecs
x86/mm/pkeys: Fix typo in Documentation/x86/protection-keys.txt
x86/mm/dump_pagetables: Speed up page tables dump for CONFIG_KASAN=y
x86/mm: Implement PCID based optimization: try to preserve old TLB entries using PCID
x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y
x86/mm: Allow userspace have mappings above 47-bit
x86/mm: Prepare to expose larger address space to userspace
x86/mpx: Do not allow MPX if we have mappings above 47-bit
x86/mm: Rename tasksize_32bit/64bit to task_size_32bit/64bit()
x86/xen: Redefine XEN_ELFNOTE_INIT_P2M using PUD_SIZE * PTRS_PER_PUD
x86/mm/dump_pagetables: Fix printout of p4d level
x86/mm/dump_pagetables: Generalize address normalization
x86/boot: Fix memremap() related build failure
...
Delay the check of nd_reserved2 to the actual endpoint (acpi_nfit_ctl)
that uses it, as a prevention of a potential double-fetch bug.
While examining the kernel source code, I found a dangerous operation that
could turn into a double-fetch situation (a race condition bug) where
the same userspace memory region are fetched twice into kernel with sanity
checks after the first fetch while missing checks after the second fetch.
In the case of _IOC_NR(ioctl_cmd) == ND_CMD_CALL:
1. The first fetch happens in line 935 copy_from_user(&pkg, p, sizeof(pkg)
2. subsequently `pkg.nd_reserved2` is asserted to be all zeroes
(line 984 to 986).
3. The second fetch happens in line 1022 copy_from_user(buf, p, buf_len)
4. Given that `p` can be fully controlled in userspace, an attacker can
race condition to override the header part of `p`, say,
`((struct nd_cmd_pkg *)p)->nd_reserved2` to arbitrary value
(say nine 0xFFFFFFFF for `nd_reserved2`) after the first fetch but before the
second fetch. The changed value will be copied to `buf`.
5. There is no checks on the second fetches until the use of it in
line 1034: nd_cmd_clear_to_send(nvdimm_bus, nvdimm, cmd, buf) and
line 1038: nd_desc->ndctl(nd_desc, nvdimm, cmd, buf, buf_len, &cmd_rc)
which means that the assumed relation, `p->nd_reserved2` are all zeroes might
not hold after the second fetch. And once the control goes to these functions
we lose the context to assert the assumed relation.
6. Based on my manual analysis, `p->nd_reserved2` is not used in function
`nd_cmd_clear_to_send` and potential implementations of `nd_desc->ndctl`
so there is no working exploit against it right now. However, this could
easily turns to an exploitable one if careless developers start to use
`p->nd_reserved2` later and assume that they are all zeroes.
Move the validation of the nd_reserved2 field to the ->ndctl()
implementation where it has a stable buffer to evaluate.
Signed-off-by: Meng Xu <mengxu.gatech@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* pm-sleep:
ACPI / PM: Check low power idle constraints for debug only
PM / s2idle: Rename platform operations structure
PM / s2idle: Rename ->enter_freeze to ->enter_s2idle
PM / s2idle: Rename freeze_state enum and related items
PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE
ACPI / PM: Prefer suspend-to-idle over S3 on some systems
platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle
PM / suspend: Define pr_fmt() in suspend.c
PM / suspend: Use mem_sleep_labels[] strings in messages
PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG
PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq()
PM / core: Add error argument to dpm_show_time()
PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq()
PM / s2idle: Rearrange the main suspend-to-idle loop
PM / timekeeping: Print debug messages when requested
PM / sleep: Mark suspend/hibernation start and finish
PM / sleep: Do not print debug messages by default
PM / suspend: Export pm_suspend_target_state
* pm-cpuidle:
cpuidle: Make drivers initialize polling state
cpuidle: Move polling state initialization code to separate file
cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol
cpuidle: Convert to using %pOF instead of full_name
* acpi-sysfs:
ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region
* acpi-apei:
ACPI / APEI: Suppress message if HEST not present
ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources
ACPI: APEI: fix the wrong iteration of generic error status block
ACPI: APEI: Enable APEI multiple GHES source to share a single external IRQ
* acpi-blacklist:
intel_pstate: convert to use acpi_match_platform_list()
ACPI / blacklist: add acpi_match_platform_list()
* acpi-ec:
ACPI / EC: Clean up EC GPE mask flag
ACPI: EC: Fix possible issues related to EC initialization order
* acpi-dma:
ACPI/IORT: Add IORT named component memory address limits
ACPI: Make acpi_dma_configure() DMA regions aware
ACPI: Introduce DMA ranges parsing
ACPI: Make acpi_dev_get_resources() method agnostic
* acpi-processor:
ACPI / processor: make function acpi_processor_check_duplicates() static
ACPI: processor: use dev_dbg() instead of dev_warn() when CPPC probe failed
* acpi-cppc:
mailbox: pcc: Drop uninformative output during boot
* acpica: (32 commits)
ACPICA: Update version to 20170728
ACPICA: Revert "Update resource descriptor handling"
ACPICA: Resources: Allow _DMA method in walk resources
ACPICA: Ensure all instances of AE_AML_INTERNAL have error messages
ACPICA: Implement deferred resolution of reference package elements
ACPICA: Debugger: Improve support for Alias objects
ACPICA: Interpreter: Update handling for Alias operator
ACPICA: EFI/EDK2: Cleanup to enable /WX for MSVC builds
ACPICA: acpidump: Add DSDT/FACS instance support for Linux and EFI
ACPICA: CLib: Add short multiply/shift support
ACPICA: EFI/EDK2: Sort acpi.h inclusion order
ACPICA: Add a comment, no functional change
ACPICA: Namespace: Update/fix an error message
ACPICA: iASL: Add support for the SDEI table
ACPICA: Divergences: reduce access size definitions
ACPICA: Update version to 20170629
ACPICA: Update resource descriptor handling
ACPICA: iasl: Update to IORT SMMUv3 disassembling
ACPICA: Disassembler: skip parsing of incorrect external declarations
ACPICA: iASL: Ensure that the target node is valid in acpi_ex_create_alias
...
mmio_flush_range() suffers from a lack of clearly-defined semantics,
and is somewhat ambiguous to port to other architectures where the
scope of the writeback implied by "flush" and ordering might matter,
but MMIO would tend to imply non-cacheable anyway. Per the rationale
in 67a3e8fe90 ("nd_blk: change aperture mapping from WC to WB"), the
only existing use is actually to invalidate clean cache lines for
ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent
cleanup of the pmem API, that also now happens to be the exact purpose
of arch_invalidate_pmem(), which would be a far more well-defined tool
for the job.
Rather than risk potentially inconsistent implementations of
mmio_flush_range() for the sake of one callsite, streamline things by
removing it entirely and instead move the ARCH_MEMREMAP_PMEM related
definitions up to the libnvdimm level, so they can be shared by NFIT
as well. This allows NFIT to be enabled for arm64.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the nfit driver initializes it runs an ARS (Address Range Scrub)
operation across every pmem range. Part of that process involves
determining the ARS capabilities of a given address range. One of the
capabilities that is reported is the 'Clear Uncorrectable Error Range
Length Unit Size' (see: ACPI 6.2 section 9.20.7.4 Function Index 1 -
Query ARS Capabilities). This property is of interest to userspace
software as it indicates the boundary at which the NVDIMM may need to
perform read-modify-write cycles to maintain ECC blocks.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
According to the ACPI specification, firmware is not required to provide
the Hardware Error Source Table (HEST). When HEST is not present, the
following superfluous message is printed to the kernel boot log -
[ 3.460067] GHES: HEST is not enabled!
Extend hest_disable variable to track whether the firmware provides this
table and if it is not present skip any log output. The existing
behaviour is preserved in all other cases.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the drivers that want to include the polling state into their
states table initialize it explicitly and drop the initialization of
it (which in fact is conditional, but that is not obvious from the
code) from the core.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
On some architectures the first (index 0) idle state is a polling
one and it doesn't really save energy, so there is the
CPUIDLE_DRIVER_STATE_START symbol allowing some pieces of
cpuidle code to avoid using that state.
However, this makes the code rather hard to follow. It is better
to explicitly avoid the polling state, so add a new cpuidle state
flag CPUIDLE_FLAG_POLLING to mark it and make the relevant code
check that flag for the first state instead of using the
CPUIDLE_DRIVER_STATE_START symbol.
In the ACPI processor driver that cannot always rely on the state
flags (like before the states table has been set up) define
a new internal symbol ACPI_IDLE_STATE_START equivalent to the
CPUIDLE_DRIVER_STATE_START one and drop the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
COMPLETION_INITIALIZER_ONSTACK() is supposed to be used as an initializer,
in other words, it should only be used in assignment expressions or
compound literals. So the usage in drivers/acpi/nfit/core.c:
COMPLETION_INITIALIZER_ONSTACK(flush.cmp);
... is inappropriate.
Besides, this usage could also break the build for another fix that
reduces stack sizes caused by COMPLETION_INITIALIZER_ONSTACK(), because
that fix changes COMPLETION_INITIALIZER_ONSTACK() from rvalue to lvalue,
and usage as above will report the following error:
drivers/acpi/nfit/core.c: In function 'acpi_nfit_flush_probe':
include/linux/completion.h:77:3: error: value computed is not used [-Werror=unused-value]
(*({ init_completion(&work); &work; }))
This patch fixes this by replacing COMPLETION_INITIALIZER_ONSTACK()
with init_completion() in acpi_nfit_flush_probe(), which does the
same initialization without any other problems.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: walken@google.com
Cc: willy@infradead.org
Link: http://lkml.kernel.org/r/20170824142239.15178-1-boqun.feng@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ACPI OEM ID / OEM Table ID / Revision can be used to identify
a platform based on ACPI firmware info. acpi_blacklisted(),
intel_pstate_platform_pwr_mgmt_exists(), and some other funcs,
have been using similar check to detect a list of platforms
that require special handlings.
Move the platform check in acpi_blacklisted() to a new common
utility function, acpi_match_platform_list(), so that other
drivers do not have to implement their own version.
There is no change in functionality.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI defines a number of instructions to use for triggering errors. However
we are currently removing the address resources from the trigger resources
for only the WRITE_REGISTER_VALUE instruction. This leads to a resource
conflict for any other valid instruction.
Check that the instruction is less than or equal to the
WRITE_REGISTER_VALUE instruction. This allows all valid memory access
instructions and protects against invalid instructions.
Fixes: b4e008dc53 (ACPI, APEI, EINJ, Refine the fix of resource conflict)
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make these const as they are only passed as an argument to the function
device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI sysfs interface provides a way to read each ACPI table from
userspace via entries in /sys/firmware/acpi/tables/
The BERT table simply provides the size and address of the error
record in BIOS reserved memory and users may want access to this
record.
In an earlier age we might have used /dev/mem to retrieve this error
record, but many systems disable /dev/mem for security reasons.
Extend this driver to provide read-only access to the data via a
file in a new directory /sys/firmware/acpi/tables/data/BERT
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
v4: fix typo reported by Punit
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The revision 0x300 generic error data entry is different
from the old version, but currently iterating through the
GHES estatus blocks does not take into account this difference.
This will lead to failure to get the right data entry if GHES
has revision 0x300 error data entry.
Update the GHES estatus iteration macro to properly increment using
acpi_hest_get_next(), and correct the iteration termination condition
because the status block data length only includes error data
length.
Convert the CPER estatus checking and printing iteration logic
to use same macro.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function acpi_processor_check_duplicates() is local to the source
and does not need to be in global scope, so make it static.
Cleans up sparse warnings:
symbol 'acpi_processor_check_duplicates' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_graph_get_child_prop_value() is intended to find a child node with a
certain property value pair. The check
if (!fwnode_property_read_u32(fwnode, prop_name, &nr))
continue;
is faulty: fwnode_property_read_u32() returns zero on success, not on
failure, leading to comparing values only if the searched property was not
found.
Moreover, the check is made against the parent device node instead of
the child one as it should be.
Fixes: 79389a83bc (ACPI / property: Add support for remote endpoints)
Reported-by: Hyungwoo Yang <hyungwoo.yang@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2d2a954375 (ACPICA: Update two error messages to emit
control method name) causes acpi_evaluate_object_typed() to fail
if its pathname argument is NULL, but some callers of that function
in the kernel, particularly acpi_nondev_subnode_data_ok(), pass
NULL as pathname to it and expect it to work.
For this reason, make acpi_evaluate_object_typed() check if its
pathname argument is NULL and fall back to using the pathname of
its handle argument if that is the case.
Reported-by: Sakari Ailus <sakari.ailus@intel.com>
Tested-by: Yang, Hyungwoo <hyungwoo.yang@intel.com>
Fixes: 2d2a954375 (ACPICA: Update two error messages to emit control method name)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
EC_FLAGS_COMMAND_STORM is actually used to mask GPE during IRQ processing.
This patch cleans it up using more readable flag/function names.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the observation that the EC command/data register addresses are
sufficient to determine if two EC devices are equivelent to modify
acpi_is_boot_ec().
Then, for the removed comparison factors, EC ID and EC GPE, they need
to be synchronized for the boot_ec:
1. Before registering the BIOS-provided EC event handlers in
acpi_ec_register_query_methods(), the namespace node holding
_Qxx methods should be located. The real namespace PNP0C09
device location then is apparently more trustworthy than the
ECDT EC ID.
2. Because of the ASUS quirks, the ECDT EC GPE is more trustworthy
than the namespace PNP0C09 device's _GPE setting.
Use the above observations to synchronize the boot_ec settings in
acpi_ec_add().
Finally, change the order of acpi_ec_ecdt_start() and acpi_ec_add(),
called from acpi_bus_register_driver(), so as to follow the fast path
of determining the location of _Qxx.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw : Changelog & comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For SoC to achieve its lowest power platform idle state a set of hardware
preconditions must be met. These preconditions or constraints can be
obtained by issuing a device specific method (_DSM) with function "1".
Refer to the document provided in the link below.
Here during initialization (from attach() callback of LPS0 device), invoke
function 1 to get the device constraints. Each enabled constraint is
stored in a table.
The devices in this table are used to check whether they were in required
minimum state, while entering suspend. This check is done from platform
freeze wake() callback, only when /sys/power/pm_debug_messages attribute
is non zero.
If any constraint is not met and device is ACPI power managed then it
prints the device information to kernel logs.
Also if debug is enabled in acpi/sleep.c, the constraint table and state
of each device on wake is dumped in kernel logs.
Since pm_debug_messages_on setting is used as condition to check
constraints outside kernel/power/main.c, pm_debug_messages_on is changed
to a global variable.
Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add statements to trace invocations of the ACPI PM notify handler
and the work functions called by it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It sometimes is useful to examine the timing of ACPI events during
certain operations only, like during system suspend/resume, so add
pr_debug() statements for that to acpi_global_event_handler().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some systems the platform firmware expects GPEs to be enabled
before the enumeration of devices and if that expectation is not
met, the systems in question may not boot in some situations.
For this reason, change the initialization ordering of the ACPI
subsystem to make it enable GPEs before scanning the namespace
for the first time in order to enumerate devices.
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Lv Zheng <lv.zheng@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Runtime GPEs have corresponding _Lxx/_Exx methods and are enabled
automatically during the initialization of the ACPI subsystem through
acpi_update_all_gpes() with the assumption that acpi_setup_gpe_for_wake()
will be called in advance for all of the GPEs pointed to by _PRW
objects in the namespace that may be affected by acpi_update_all_gpes().
That is, acpi_ev_initialize_gpe_block() can only be called for a GPE
block after acpi_setup_gpe_for_wake() has been called for all of the
_PRW (wakeup) GPEs in it.
The platform firmware on some systems, however, expects GPEs to be
enabled before the enumeration of devices which is when
acpi_setup_gpe_for_wake() is called and that goes against the above
assumption.
For this reason, introduce a new flag to be set by
acpi_ev_initialize_gpe_block() when automatically enabling a GPE
to indicate to acpi_setup_gpe_for_wake() that it needs to drop the
reference to the GPE coming from acpi_ev_initialize_gpe_block()
and modify acpi_setup_gpe_for_wake() accordingly. These changes
allow acpi_setup_gpe_for_wake() and acpi_ev_initialize_gpe_block()
to be invoked in any order.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In some cases GPEs are already active when they are enabled by
acpi_ev_initialize_gpe_block() and whatever happens next may depend
on the result of handling the events signaled by them, so the
events should not be discarded (which is what happens currently) and
they should be handled as soon as reasonably possible.
For this reason, modify acpi_ev_initialize_gpe_block() to
dispatch GPEs with the status flag set in-band right after
enabling them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit 2a5708409e (ACPI / EC: Fix a gap that ECDT EC cannot handle
EC events) introduced acpi_ec_ecdt_start(), but that function is
invoked before acpi_ec_query_init(), which is too early. This causes
the kernel to crash if an EC event occurs after boot, when ec_query_wq
is not valid:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000102
...
Workqueue: events acpi_ec_event_handler
task: ffff9f539790dac0 task.stack: ffffb437c0e10000
RIP: 0010:__queue_work+0x32/0x430
Normally, the DSDT EC should always be valid, so acpi_ec_ecdt_start()
is actually a no-op in the majority of cases. However, commit
c712bb58d8 (ACPI / EC: Add support to skip boot stage DSDT probe)
caused the probing of the DSDT EC as the "boot EC" to be skipped when
the ECDT EC is valid and uncovered the bug.
Fix this issue by invoking acpi_ec_ecdt_start() after acpi_ec_query_init()
in acpi_ec_init().
Link: https://jira01.devtools.intel.com/browse/LCK-4348
Fixes: 2a5708409e (ACPI / EC: Fix a gap that ECDT EC cannot handle EC events)
Fixes: c712bb58d8 (ACPI / EC: Add support to skip boot stage DSDT probe)
Reported-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: Feng Chenzhou <chenzhoux.feng@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
xgene v1/v2 8250 UARTs don't run at the standard clock rate expected by
the driver and there is no information on clocking available from the
SPCR table. As there has been no progress on relevant vendors updating
DBG2/SPCR specifications to fix this work around this using the previous
xgene quirk handling to avoid setting a baud rate and therefore using
the UART as configured by firmware.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
xgene v1/v2 chips are also used on moonshot cartridges that have
different table headers to the ones on Mustang. Extend the quirk
so it also recognises the Moonshot M400 variant too.
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Tested-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a
-rc1 patch that turned out to not be a good idea, and the other is a fix
for the pl011 serial driver.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+1vw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykreACeLI2spfagnOcnW264PGHxLMgj47EAn0JPSNIg
5FLEtVsgxMuc8kc4LkDb
=58g+
-----END PGP SIGNATURE-----
Merge tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two tty serial driver fixes for 4.13-rc5. One is a revert of
a -rc1 patch that turned out to not be a good idea, and the other is a
fix for the pl011 serial driver.
Both have been in linux-next with no reported issues"
* tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: Delete dead code for CIR serial ports"
tty: pl011: fix initialization order of QDF2400 E44
Rename struct platform_freeze_ops to platform_s2idle_ops to make it
clear that the callbacks in it are used during suspend-to-idle
suspend/resume transitions and rename the related functions,
variables and so on accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename the ->enter_freeze cpuidle driver callback to ->enter_s2idle
to make it clear that it is used for entering suspend-to-idle and
rename the related functions, variables and so on accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To make it clear that the symbol in question refers to
suspend-to-idle, rename it from PM_SUSPEND_FREEZE to
PM_SUSPEND_TO_IDLE.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A recent change reintroduced a bug that had previously been
fixed by commit d49f2dedf3 ("ACPI/IORT: Fix CONFIG_IOMMU_API
dependency"):
drivers/acpi/arm64/iort.c: In function 'iort_iommu_configure':
drivers/acpi/arm64/iort.c:829:26: error: 'struct iommu_fwspec' has no member named 'ops'
Replace a direct reference to iommu_fwspec->ops with a helper function
call to fix the issue.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The keyboard and touchpad on MacBook's from 2015 onwards are connected
via an SPI bus. On MacBook8's (2015) the ACPI device for the SPI master
for this bus has _CID "INT33C1", and hence the acpi-lpss handler here is
triggered for it. However, the DSDT lists no memory resources for this
device, resulting in an error being returned by the attach callback and
therefore the SPI master device being ignored. This prevents us from
being able to register the keyboard and touchpad driver.
Furthermore, the controller (a Wildcat Point-LP controller) does not
appear to need the functionality provided by the apci-lpss handler.
Therefore we now just skip the handler if no memory resources are found
and let the ACPI scan complete successfully for this device.
All of this is not an issue on later MacBook(Pro)'s because their ACPI
SPI devices don't have any _CID and therefore no attempt is made to attach
this handler.
Returning an error was introduced in commit d3e13ff3c1 - this restores
the original behaviour.
Link: https://github.com/cb22/macbook12-spi-driver
Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ARM IORT specification(rev. C) has added provision to define proximity
domain in SMMUv3 IORT table. Adding required code to parse Proximity
domain and set numa_node of smmv3 platform devices.
Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
[lorenzo.pieralisi@arm.com: update pr_info()/commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
When a PCI device has DMA quirks, we need to ensure that an upstream
IOMMU knows about all possible aliases, since the presence of a DMA
quirk does not preclude the device still also emitting transactions
(e.g. MSIs) on its 'real' RID. Similarly, the rules for bridge aliasing
are relatively complex, and some bridges may only take ownership of
transactions under particular transient circumstances, leading again to
multiple RIDs potentially being seen at the IOMMU for the given device.
Take all this into account in iort_iommu_configure() by mapping every
RID produced by the alias walk, not just whichever one comes out last.
Since adding any more internal PTR_ERR() juggling would have confused me
no end, a bit of refactoring happens in the process - we know where to
find the ops if everything succeeded, so we're free to just pass regular
error codes around up until then.
CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
CC: Hanjun Guo <hanjun.guo@linaro.org>
CC: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[lorenzo.pieralisi@arm.com: tagged __get_pci_rid __maybe_unused]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
IORT named components provide firmware configuration describing
how many address bits a given device is capable of generating
to address memory.
Add code to the kernel to retrieve memory address limits
configuration for IORT named components and configure DMA masks
accordingly.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Current ACPI DMA configuration set-up device DMA capabilities through
kernel defaults that do not take into account platform specific DMA
configurations reported by firmware.
By leveraging the ACPI acpi_dev_get_dma_resources() API, add code
in acpi_dma_configure() to retrieve the DMA regions to correctly
set-up PCI devices DMA parameters.
Rework the ACPI IORT kernel API to make sure they can accommodate
the DMA set-up required by firmware. By making PCI devices DMA set-up
ACPI IORT specific, the kernel is shielded from unwanted regressions
that could be triggered by parsing DMA resources on arches that were
previously ignoring them (ie x86/ia64), leaving kernel behaviour
unchanged on those arches.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some devices have limited addressing capabilities and cannot
reference the whole memory address space while carrying out DMA
operations (eg some devices with bus address bits range smaller than
system bus - which prevents them from using bus addresses that are
otherwise valid for the system).
The ACPI _DMA object allows bus devices to define the DMA window that is
actually addressable by devices that sit upstream the bus, therefore
providing a means to parse and initialize the devices DMA masks and
addressable DMA range size.
By relying on the generic ACPI kernel layer to retrieve and parse
resources, introduce ACPI core code to parse the _DMA object.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is useful to be able to know the position of a DIMM in an
interleave-set. Consider the case where the order of the DIMMs changes
causing a namespace to be invalidated because the interleave-set cookie no
longer matches. If the before and after state of each DIMM position is
known this state debugged by the system owner.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Modify the ACPI system sleep support setup code to select
suspend-to-idle as the default system sleep state if
(1) the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT and
(2) the Low Power Idle S0 _DSM interface has been discovered and
(3) the default sleep state was not selected from the kernel command
line.
The main motivation for this change is that systems where the (1) and
(2) conditions are met typically ship with OSes that don't exercise
the S3 path in the platform firmware which remains untested and turns
out to be non-functional at least in some cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>
The function acpi_dev_get_resources() is completely generic and
can be used to parse resource objects that are not necessarily
coming from the _CRS method but also from other objects eg _DMA
that have the same _CRS resource format.
Create an acpi_dev_get_resources() helper, internal to the ACPI
resources parsing compilation unit, __acpi_dev_get_resources(),
that takes a const char* parameter to detect which ACPI method should be
called to retrieve the resources list and make acpi_dev_get_resources()
call it with a method name _CRS leaving the API behaviour unchanged.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit af661c00afac7aa481a961fa48c6540a99ad64a6
The _DMA object contains a resource template, this change
adds support for the walk resources function so that ACPI
devices containing a _DMA object can actually parse it to
detect DMA ranges for the respective bus.
Link: https://github.com/acpica/acpica/commit/af661c00
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ea9152daaec30760fa4c25285998f58233ec0db5
This exception is only meaningful with an associated error message.
Link: https://github.com/acpica/acpica/commit/ea9152da
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0c08790c56fdf0dc081ae869495a09d8c4230854
This change defers the resolution of package elements that
are named references until after the entire namespace has been
loaded from the definition block. This allows such references
to be in fact forward references for both module level code
and control methods.
Link: https://github.com/acpica/acpica/commit/0c08790c
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 916993dbcd45b46e01f6c9b8337a01513f5d8dcc
Properly resolve alias objects for display.
General cleanup of related output.
Link: https://github.com/acpica/acpica/commit/916993db
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 719d0bdd48e3e8e7a62a86c04922b9f41da6def0
Provide common creation code for the Alias operator. All objects
are now handled the same, with the only exception being the
Method() operator. It has a special internal Alias type.
Link: https://github.com/acpica/acpica/commit/719d0bdd
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit a7c6d65a5dab20b1e191c197e09af337fc54b341
/WX turns warning into fatal erros for MSVC builds. We need /WX- during
EDK2 porting to allow agile development.
Now it is time to enable /WX and some explicit type conversion cleanups
are required for enabling /WX. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/a7c6d65a
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 01b8f5a2350b9cc329cd8402ac8faec36fc501f5
In order to build ACPICA EFI tools with EDK-II on Windows, 64-bit
multiply/shift supports are also required to be implemented. Otherwise,
MSVC complains:
acpidump.lib(utstrtoul64.obj) : error LNK2001: unresolved external symbol __allmul
acpidump.lib(uthex.obj) : error LNK2001: unresolved external symbol __aullshr
Note:
1. This patch also splits _EDK2_EFI from _GNU_EFI as they might have
different math64 supports.
2. Support of gcc math64 is not included in this patch.
3. Support of EDK2 arch independent math64 is done via linking to base_lib.
This patch fixes this issue. Reported by Shao Ming, fixed by Lv Zheng.
For Linux kernel, this patch is a functional no-op.
Link: https://github.com/acpica/acpica/commit/01b8f5a2
Tested-by: "Shao, Ming" <smbest163@163.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d586c29a026a6172c1113df4d75fd6d764196e77
Describe 2nd byte of the end_tag resource descriptor.
Link: https://github.com/acpica/acpica/commit/d586c29a
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8b7fa979ef81469e70f501f582466a265d6f595b
Was emitting an internal namestring without converting it to
the external format.
Link: https://github.com/acpica/acpica/commit/8b7fa979
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit cf27b3c98883d2a15d932016792fcb8272ace96d
The following commit introduces definition of access width to ACPICA.
Commit: 2bece49394
Subject: ACPI: SPCR: Use access width to determine mmio usage
Actually the access bit width can be calculated via access width. It
would be better to define a macro calculating bit width rather than
defining fixed values. This patch thus cleans up the definitions to
reduce divergences.
Link: https://github.com/acpica/acpica/commit/cf27b3c9
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Functions working with attribute_groups provided by <linux/sysfs.h>
work with const attribute_group. These attribute_group structures do not
change at runtime so mark them as const.
File size before:
text data bss dec hex filename
7902 3528 64 11494 2ce6 drivers/acpi/dock.o
File size after:
text data bss dec hex filename
7998 3432 64 11494 2ce6 drivers/acpi/dock.o
This change was made with the help of Coccinelle.
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SPI and I2C slaves are enumerated by their respective parents rather
than the ACPI core. They are recognized by presence of _CRS resources,
which however are missing on Macs. Check for presence of device
properties instead.
Reported-and-tested-by: Ronald Tschalär <ronald@innovation.ch>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the rest of the world has standardized on _DSD as the way to store
device properties in AML (introduced with ACPI 5.1 in 2014), Apple has
been using a custom _DSM to achieve the same for much longer (ever since
they switched from DeviceTree-based PowerPC to Intel in 2005, verified
with MacOS X 10.4.11).
The theory of operation on macOS is as follows: AppleACPIPlatform.kext
invokes mergeEFIproperties() and mergeDSMproperties() for each device to
merge properties conveyed by EFI drivers as well as properties stored in
AML into the I/O Kit registry from which they can be retrieved by
drivers. We've been supporting EFI properties since commit 58c5475aba
("x86/efi: Retrieve and assign Apple device properties"). The present
commit adds support for _DSM properties, thereby completing our support
for Apple device properties. The _DSM properties are made available
under the primary fwnode, the EFI properties under the secondary fwnode.
So for devices which possess both property types, they can all be
elegantly accessed with the uniform API in <linux/property.h>.
Until recently we had no need to support _DSM properties, they contained
only uninteresting garbage. The situation has changed with MacBooks and
MacBook Pros introduced since 2015: Their keyboard is attached with SPI
instead of USB and the _CRS data which is necessary to initialize the
spi driver only contains valid information if OSPM responds "false" to
_OSI("Darwin"). If OSPM responds "true", _CRS is empty and the spi
driver fails to initialize. The rationale is very simple, Apple only
cares about macOS and Windows: On Windows, _CRS contains valid data,
whereas on macOS it is empty. Instead, macOS gleans the necessary data
from the _DSM properties.
Since Linux deliberately defaults to responding "true" to _OSI("Darwin"),
we need to emulate macOS' behaviour by initializing the spi driver with
data returned by the _DSM.
An out-of-tree driver for the SPI keyboard exists which currently binds
to the ACPI device, invokes the _DSM, parses the returned package and
instantiates an SPI device with the data gleaned from the _DSM:
https://github.com/cb22/macbook12-spi-driver/commit/9a416d699ef4https://github.com/cb22/macbook12-spi-driver/commit/0c34936ed9a1
By adding support for Apple's _DSM properties in generic ACPI code, the
out-of-tree driver will be able to register as a regular SPI driver,
significantly reducing its amount of code and improving its chances to
be mainlined.
The SPI keyboard will not be the only user of this commit: E.g. on the
MacBook8,1, the UART-attached Bluetooth device likewise returns empty
_CRS data if OSPM returns "true" to _OSI("Darwin").
The _DSM returns a Package whose format unfortunately deviates slightly
from the _DSD spec: The properties are marshalled up in a single Package
as alternating key/value elements, unlike _DSD which stores them as a
Package of 2-element Packages. The present commit therefore converts
the Package to _DSD format and the ACPI core can then treat the data as
if Apple would follow the standard.
Well, except for one small annoyance: The properties returned by the
_DSM only ever have one of two types, Integer or Buffer. The former is
retrievable as usual with device_property_read_u64(), but the latter is
not part of the _DSD spec and it is not possible to retrieve Buffer
properties with the device_property_read_*() functions due to the type
checking performed in drivers/acpi/property.c. It is however possible
to retrieve them with acpi_dev_get_property(). Apple is using the
Buffer type somewhat sloppily to store null-terminated strings but also
integers. The real data type is not distinguishable by the ACPI core
and the onus is on the caller to use the contents of the Buffer in an
appropriate way.
In case Apple moves to _DSD in the future, this commit first checks for
_DSD and falls back to _DSM only if _DSD is not found.
Tested-by: Ronald Tschalär <ronald@innovation.ch>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fabricated devices such as LNXPWRBN lack a handle, causing evaluation
of _CCA and _DSD to always fail with AE_BAD_PARAMETER. While that is
merely a (negligible) waste of processing power, evaluating a _DSM for
them (such as Apple's device properties _DSM which we're about to add)
results in an ugly error:
ACPI: \: failed to evaluate _DSM (0x1001)
Avoid by not evaluating _DSD and the upcoming _DSM for devices without
handle.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We're about to amend ACPI bus scan with DMI checks whether we're running
on a Mac to support Apple device properties in AML. The DMI checks are
performed for every single device, adding overhead for everything x86
that isn't Apple, which is the majority. Rafael and Andy therefore
request to perform the DMI match only once and cache the result.
Outside of ACPI various other Apple DMI checks exist and it seems
reasonable to use the cached value there as well. Rafael, Andy and
Darren suggest performing the DMI check in arch code and making it
available with a header in include/linux/platform_data/x86/.
To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c
to perform the DMI check and invoke it from setup_arch(). Switch over
all existing Apple DMI checks, thereby fixing two deficiencies:
* They are now #defined to false on non-x86 arches and can thus be
optimized away if they're located in cross-arch code.
* Some of them only match "Apple Inc." but not "Apple Computer, Inc.",
which is used by BIOSes released between January 2006 (when the first
x86 Macs started shipping) and January 2007 (when the company name
changed upon introduction of the iPhone).
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Suggested-by: Darren Hart <dvhart@infradead.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Function acpi_sleep_syscore_init has no external user so it should be
static.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_pci_propagate_wakeup() routine is there to handle cases in
which PCI bridges (or PCIe ports) are expected to signal wakeup
for devices below them, but currently it doesn't do that correctly.
The problem is that acpi_pci_propagate_wakeup() uses
acpi_pm_set_device_wakeup() for bridges and if that routine is
called for multiple times to disable wakeup for the same device,
it will disable it on the first invocation and the next calls
will have no effect (it works analogously when called to enable
wakeup, but that is not a problem).
Now, say acpi_pci_propagate_wakeup() has been called for two
different devices under the same bridge and it has called
acpi_pm_set_device_wakeup() for that bridge each time. The
bridge is now enabled to generate wakeup signals. Next,
suppose that one of the devices below it resumes and
acpi_pci_propagate_wakeup() is called to disable wakeup for that
device. It will then call acpi_pm_set_device_wakeup() for the bridge
and that will effectively disable remote wakeup for all devices under
it even though some of them may still be suspended and remote wakeup
may be expected to work for them.
To address this (arguably theoretical) issue, allow
wakeup.enable_count under struct acpi_device to grow beyond 1 in
certain situations. In particular, allow that to happen in
acpi_pci_propagate_wakeup() when wakeup is enabled or disabled
for PCI bridges, so that wakeup is actually disabled for the
bridge when all devices under it resume and not when just one
of them does that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
To prepare for a subsequent change and make the code somewhat easier
to follow, do the following in the ACPI device wakeup handling code:
* Replace wakeup.flags.enabled under struct acpi_device with
wakeup.enable_count as that will be necessary going forward.
For now, wakeup.enable_count is not allowed to grow beyond 1,
so the current behavior is retained.
* Split acpi_device_wakeup() into acpi_device_wakeup_enable()
and acpi_device_wakeup_disable() and modify the callers of
it accordingly.
* Introduce a new acpi_wakeup_lock mutex to protect the wakeup
enabling/disabling code from races in case it is executed
more than once in parallel for the same device (which may
happen for bridges theoretically).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
X-Gene platforms describe multiple GHES error sources with the same
hardware error notification type (external interrupt) and interrupt
number.
Change the GHES interrupt request to support sharing the same IRQ.
This change includs contributions from Tuan Phan <tphan@apm.com>.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The work-around for Qualcomm Technologies QDF2400 Erratum 44 hinges on a
global variable defined in the pl011 driver. The ACPI SPCR parsing code
determines whether the work-around is needed, and if so, it changes the
console name from "pl011" to "qdf2400_e44". The expectation is that
the pl011 driver will implement the work-around when it sees the console
name. The global variable qdf2400_e44_present is set when that happens.
The problem is that work-around needs to be enabled when the pl011
driver probes, not when the console name is queried. However, sbsa_probe()
is called before pl011_console_match(). The work-around appeared to work
previously because the default console on QDF2400 platforms was always
ttyAMA1. The first time sbsa_probe() is called (for ttyAMA0),
qdf2400_e44_present is still false. Then pl011_console_match() is called,
and it sets qdf2400_e44_present to true. All subsequent calls to
sbsa_probe() enable the work-around.
The solution is to move the global variable into spcr.c and let the
pl011 driver query it during probe time. This works because all QDF2400
platforms require SPCR, so parse_spcr() will always be called.
pl011_console_match still checks for the "qdf2400_e44" console name,
but it doesn't do anything else special.
Fixes: 5a0722b898 ("tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44")
Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPI HID for Hisilicon Hip07/08 should be HISI02A1/2,
not HISI0A21/2, HISI02A1/2 was tested ok but was modified
by the stupid typo when upstream the patches (by me),
correct them to the right IDs (matching the IDs in
drivers/i2c/busses/i2c-designware-platdrv.c).
Fixes: 6e14cf361a (ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller)
Reported-by: Tao Tian <tiantao6@huawei.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* acpi-pm:
ACPI / PM / EC: Flush all EC work in acpi_freeze_sync()
ACPI / EC: Add parameter to force disable the GPE on suspend
* acpi-numa:
ACPI: NUMA: Fix typo in the full name of SRAT
ACPI: NUMA: add missing include in acpi_numa.h
_CPC is a optinal object for processor device so it's
fine for processor devices in DSDT without CPPC data,
but when booting the system with CPPC enabled in the
kernel but without its support in the firmware, I got
lots of warnings on a 64 core system:
[ 6.346016] acpi ACPI0007:00: CPPC data invalid or not present
[ 6.346028] acpi ACPI0007:01: CPPC data invalid or not present
[ 6.346039] acpi ACPI0007:02: CPPC data invalid or not present
[ 6.346050] acpi ACPI0007:03: CPPC data invalid or not present
[ 6.346063] acpi ACPI0007:04: CPPC data invalid or not present
...
[ 6.346737] acpi ACPI0007:3f: CPPC data invalid or not present
This isn't much useful and a little bit noise, so
switch the dev_warn() to dev_dbg().
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Partially overlapping regions cause platform device creation
to fail. The latter of two overlapping resources will fail to be
reserved. Fix this by merging overlapping resource ranges while
enumerating WDAT table entries.
Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fix the typos in function header of
acpi_lpat_raw_to_temp and acpi_lpat_temp_to_raw.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Testing has shown that the TS-pin's bias-current needs to be disabled
when reading the GPIO0 pin in GPADC mode.
It seems that there is only 1 bias current source and to be able to use it
for the GPIO0 pin in GPADC mode it must be temporarily turned off for the
TS pin, but the datasheet does not mention this.
This commit adds the necessary writes to turn the TS pin BIAS current
off before and back on after reading the GPADC. This fixes the GPADC
always returning a reading of 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To save someone the time of searching the ACPI spec for
"Static Resource Affinity Table".
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The new fwnode_property_get_reference_args() interface amends the fwnode
property API with the functionality of both of_parse_phandle_with_args()
and __acpi_node_get_property_reference().
The semantics is slightly different: the cells property is ignored on ACPI
as the number of arguments can be explicitly obtained from the firmware
interface.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make fwnode arguments to the fwnode property API const.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Constify internal ACPI fwnode arguments in preparation for the same in
fwnode API.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make local variables const (head) or add new variables; adev was used for
two purposes: to refer the root device node and its children. The two
purposes are separated by this patch.
This is preparation for making fwnode arguments const for fwnode ops.
Don't constify the argument itself quite yet as this is used as a callback
function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Instead of relying on the struct fwnode_handle type field, define
fwnode_operations structs for all separate types of fwnodes. To find out
the type, compare to the ops field to relevant ops structs.
This change has two benefits:
1. it avoids adding the type field to each and every instance of struct
fwnode_handle, thus saving memory and
2. makes the ops field the single factor that defines both the types of
the fwnode as well as defines the implementation of its operations,
decreasing the possibility of bugs when developing code dealing with
fwnode internals.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from
suspend-to-idle) introduced acpi_freeze_sync() whose purpose is to
flush all of the processing of possible wakeup events signaled via
the ACPI SCI. However, it doesn't flush the query workqueue used
by the EC driver, so the events generated by the EC may not be
processed timely which leads to issues (increased overhead at least,
lost events possibly).
To fix that introduce acpi_ec_flush_work() that will flush all of
the outstanding EC work and call it from acpi_freeze_sync().
Fixes: eed4d47efe (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit c8eac10178b387f9eb1935694e509d4518da77bb
This change restores the change introduced by commit 23b5bbe and
adds a comment concerning resource descriptor buffers that extend
beyond the END_TAG descriptor.
Link: https://github.com/acpica/acpica/commit/c8eac101
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ed25461901d34120067b07ec280af30abc0458f1
Link: https://github.com/acpica/acpica/commit/ed254619
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8b14afac65d983610cc5387ede6d85ea5ee075be
The following ACPI table contains an invalid target node within the
Alias operator:
definition_block ("", "SSDT", 1, "Bug", "BugTable", 0x00001000)
{
Scope (_SB)
{
Device (DEV0)
{
Name (_ADR, 1)
Device (DEV1)
{
Alias (_ADR, _ADR)
}
}
}
}
If an ACPI table contains such an invalid target node in an Alias
operator, a segmentation fault will occur when the target node is
dereferenced within acpi_ex_create_alias. Add a check for such an invalid
target node in acpi_ex_create_alias and return AE_NULL_OBJECT as suggested
by @acpibob.
Link: https://github.com/acpica/acpica/commit/8b14afac
Signed-off-by: Alex James <theracermaster@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2dd6c151d5d5e76dacba8f7db9e259fc72982d17
ACPICA commit ffddee6638aced83be18b8bc88569586c1a43e03
This patch allows tables not verified in early stage verfied in
acpi_reallocate_root_table(). This is useful for OSPMs like linux where tables
cannot be verified in early stage due to early ioremp limitations on some
architectures. Reported by Hans de Geode, fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/2dd6c151
Link: https://github.com/acpica/acpica/commit/ffddee66
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 182bdffc0644f568be614a6d4debd651e29ca587
They are all mechanisms used to verify if a table is qualified to be
installed and controlled by acpi_gbl_enable_table_validation, so combine them
together. By doing so, table duplication check is applied to the statically
loaded tables (however whether it is actually enabled is still determined
by acpi_gbl_enable_table_validation). Lv Zheng.
Link: https://github.com/acpica/acpica/commit/182bdffc
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918
acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire
table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table()
is prepared for the same purpose. So this patch combines them together
using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/3d837b5d
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit d3c944f2cdc8c7e847b7942b1864f285189f7bce
Windows seems to allow arbitrary table signatures for Load/load_table
opcodes:
ACPI BIOS Error (bug): Table has invalid signature [PRAD] (0x44415250)
So this patch removes dynamic load signature checks. However we need to
find a way to avoid table loading against tables like MADT. This is not
covered by this commit.
This Windows behavior has been validated on link #1. An end user bug
report can also be found on link #2.
This patch also includes simple cleanup for static load signature check
code. Reported by Ye Xiaolong, Fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/d3c944f2
Link: https://github.com/acpica/acpica/pull/121 [#1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=118601 [#2]
Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
Reported-by: Olga Uhina <olga.uhina@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 4551f51fa8ba33a977721c3b250cb70a309e3f23
Recently, we allows the table mutex to be held in both early and late stage
APIs. This patch further cleans up the related code to reduce redundant
code related to acpi_gbl_table_handler. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/4551f51f
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 73512384c9eb1e7f1b28d0a7372df26a3732f96b
To avoid caller to trigger unexpected warning messages (Link #1):
ACPI Warning: Table ffffffffbb461d20, Validation count is zero before decrement
Which is reported from acpi_tb_put_table(). When the table is validated, the
pointer must be non-zero. Thus the message is not suitable for invalidated
tables. This patch fixes the callee side based on this fact. Reported by
Cristian Aravena Romero, Fixed by Lv Zheng.
Link: https://github.com/acpica/acpica/commit/73512384
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191221 [#1]
Reported-by: Cristian Aravena Romero <caravena@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 894e49ef22db354eb1685cdb6f5f991766351d3c
acpisrc now has capability to convert both the followings:
1. Form 1:
typedef struct/union foo { struct/union foo {
.... --> ...
} FOO; }
2. Form 2:
typedef struct/union foo FOO; --> typedef struct/union foo foo;
It becomes unable to handle the following:
3. Form3:
typedef struct/union foo { /* comment */
...
} FOO;
-->
strut/union foo { /* comment */
...
};
As:
1. The purpose of acpisrc is to convert formatted code (ACPICA coding
style) into linux coding style,
2. acpisrc is a very simple tool that doesn't fully handle C language.
This commit changes the definitions side in order not to regress and we
shall make "no comments in struct/union line" as a new ACPICA coding style
rule. Lv Zheng.
Link: https://github.com/acpica/acpica/commit/894e49ef
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 47538f5f0773c0820d8f552e20f6e77104290c01
The following commit is not correctly linuxized by its ACPICA form (see
link #1 for reference):
Commit: 3d867f6c5f
Subject: ACPICA: Use designated initializers
Thus breaks linuxize process.
This patch is a linuxized back port result of the upstreamed ACPICA
commit (see link #2 for reference).
Link: https://github.com/acpica/acpica/pull/248/ [#1]
Link: https://github.com/acpica/acpica/commit/47538f5f [#2]
Signed-off-by: Kees Cook <keescook@google.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 9a252114197409290813bee570e9d53c22b99d32
This change allows compilation of code like the following:
definition_block (...)
{
External (ABCD.EFGH)
Device (ABCD)
{
Name (IJLK,0)
}
}
but does not allow compilation of code like the following:
definition_block (...)
{
External (ABCD)
Device (ABCD)
{
Name (EFGH,0)
}
}
Link: https://github.com/acpica/acpica/commit/9a252114
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8521b98ebdea450011fa62c14a77fed9affa4236
Link: https://github.com/acpica/acpica/commit/8521b98e
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bb457076d42b95b1453e261da2c8cc0c05ba4718
Fix some alignment issues
Link: https://github.com/acpica/acpica/commit/bb457076
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit 8110dd281e (ACPI / sleep: EC-based wakeup from
suspend-to-idle on recent systems) the configuration of GPEs,
including the EC one, is not changed during suspend-to-idle on
recent systems. That's in order to make system wakeup events
generated by the EC work, in particular.
However, on some of the systems in question (for example on Dell
XPS13 9365), in addition to generating system wakeup events the
EC generates a heartbeat sequence of interrupts that have nothing
to do with wakeup while suspended, and the Low Power Idle S0 _DSM
interface doesn't change that behavior.
The users of those systems may prefer to disable the EC GPE during
system suspend, for the cost of non-functional power button wakeup
or similar, but currently there is no way to do that.
For this reason, add a new module parameter, ec_no_wakeup, for the
EC driver module that, if set, will cause the EC GPE to be disabled
during system suspend and re-enabled during the subsequent system
resume.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=192591#c106
Amends: 8110dd281e (ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems)
Reported-and-tested-by: Patrik Kullman <patrik.kullman@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The SME patches we are about to apply add some E820 logic, so merge in
pending E820 code changes first, to have a single code base.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
nfit_init() calls nfit_mce_register() on module load. When the module
load fails the nfit mce decoder is not unregistered. The module's
memory is freed leaving the decoder chain referencing junk. This will
cause panics as future registrations will reference the free'd memory.
Unregister the nfit mce decoder on module init failure.
[v2]: register and then unregister mce handler to avoid losing mce events
[v3]: also cleanup nfit workqueue
Fixes: 6839a6d96f ("nfit: do an ARS scrub on hitting a latent media error")
Cc: <stable@vger.kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Lee, Chun-Yi" <joeyli.kernel@gmail.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: lszubowi@redhat.com
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dell OptiPlex 9020M is a micro PC desktop that has no built-in
LCD panel and its acpi_video does not work.
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Fix the return value of acpi_gsi_to_irq() to make the GSI to
IRQ mapping work on the Mustang (ARM64) platform (Mark Salter).
- Fix an EC driver issue that causes fans to behave abnormally
after system resume on some systems which turns out to be
related to switching over the EC into the polling mode during
the noirq stages of system suspend and resume (Lv Zheng).
- Add quirks for ACPI device objects that need to be treated as
"always present", because their _STA methods are designed to
work around Windows driver bugs and return garbage from our
perspective (Hans de Goede).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=6Zb+
-----END PGP SIGNATURE-----
Merge tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix the return value of an IRQ mapping routine in the ACPI core,
fix an EC driver issue causing abnormal fan behavior after system
resume on some systems and add quirks for ACPI device objects that
need to be treated as "always present" to work around bogus
implementations of the _STA control method.
Specifics:
- Fix the return value of acpi_gsi_to_irq() to make the GSI to IRQ
mapping work on the Mustang (ARM64) platform (Mark Salter).
- Fix an EC driver issue that causes fans to behave abnormally after
system resume on some systems which turns out to be related to
switching over the EC into the polling mode during the noirq stages
of system suspend and resume (Lv Zheng).
- Add quirks for ACPI device objects that need to be treated as
"always present", because their _STA methods are designed to work
around Windows driver bugs and return garbage from our perspective
(Hans de Goede)"
* tag 'acpi-fixes-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / x86: Add KIOX000A accelerometer on GPD win to always_present_ids array
ACPI / x86: Add Dell Venue 11 Pro 7130 touchscreen to always_present_ids
ACPI / x86: Allow matching always_present_id array entries by DMI
Revert "ACPI / EC: Enable event freeze mode..." to fix a regression
ACPI / EC: Drop EC noirq hooks to fix a regression
ACPI / irq: Fix return code of acpi_gsi_to_irq()
This update comes with:
* Support for lockless operation in the ARM io-pgtable code.
This is an important step to solve the scalability problems in
the common dma-iommu code for ARM
* Some Errata workarounds for ARM SMMU implemenations
* Rewrite of the deferred IO/TLB flush code in the AMD IOMMU
driver. The code suffered from very high flush rates, with the
new implementation the flush rate is down to ~1% of what it
was before
* Support for amd_iommu=off when booting with kexec. Problem
here was that the IOMMU driver bailed out early without
disabling the iommu hardware, if it was enabled in the old
kernel
* The Rockchip IOMMU driver is now available on ARM64
* Align the return value of the iommu_ops->device_group
call-backs to not miss error values
* Preempt-disable optimizations in the Intel VT-d and common
IOVA code to help Linux-RT
* Various other small cleanups and fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=pmBf
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
"This update comes with:
- Support for lockless operation in the ARM io-pgtable code.
This is an important step to solve the scalability problems in the
common dma-iommu code for ARM
- Some Errata workarounds for ARM SMMU implemenations
- Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver.
The code suffered from very high flush rates, with the new
implementation the flush rate is down to ~1% of what it was before
- Support for amd_iommu=off when booting with kexec.
The problem here was that the IOMMU driver bailed out early without
disabling the iommu hardware, if it was enabled in the old kernel
- The Rockchip IOMMU driver is now available on ARM64
- Align the return value of the iommu_ops->device_group call-backs to
not miss error values
- Preempt-disable optimizations in the Intel VT-d and common IOVA
code to help Linux-RT
- Various other small cleanups and fixes"
* tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
iommu/vt-d: Constify intel_dma_ops
iommu: Warn once when device_group callback returns NULL
iommu/omap: Return ERR_PTR in device_group call-back
iommu: Return ERR_PTR() values from device_group call-backs
iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device()
iommu/vt-d: Don't disable preemption while accessing deferred_flush()
iommu/iova: Don't disable preempt around this_cpu_ptr()
iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126
iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701)
iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74
ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model
iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions
iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table
iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE
iommu/arm-smmu-v3: Remove io-pgtable spinlock
iommu/arm-smmu: Remove io-pgtable spinlock
iommu/io-pgtable-arm-v7s: Support lockless operation
iommu/io-pgtable-arm: Support lockless operation
iommu/io-pgtable: Introduce explicit coherency
iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap
...
The GPD win BIOS dated 20170320 has disabled the accelerometer, the
drivers sometimes cause crashes under Windows and this is how the
manufacturer has solved this :|
I see no other way to keep the accelerometer working under Windows then
adding it to the always_present_ids array.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The _STA method of the Venue 11 Pro 7130 touchscreen has this ugliness:
Method (_STA, 0, NotSerialized) // _STA: Status
{
If ((SDS1 & One) == One)
{
If (RST1 == Zero)
{
Return (0x0F)
}
ElseIf (RST2 == Zero)
{
RST2 = One
TMRV = Timer
}
Else
{
Local0 = ((Timer - TMRV) / 0x2710)
If (Local0 > TMRI)
{
RST2 = Zero
RST1 = Zero
}
}
}
Else
{
Return (Zero)
}
}
Whereby RST1 gets set by _SB.PCI0.GFX0.LCD.LCD1._ON, this means that
after RST1 has been set first _STA must be called to set TIMER and
then after enough time has elapsed _STA must be called twice more, once
to clear RST1 and once to finally return 0xf before the touchscreen will
show up. Which is just crazy.
This commit adds an always_present_ids entry for the SYNA7500 touchscreen
ACPI node, together with a DMI match for the Venue 11 Pro 7130, fixing the
touchscreen not working on this device.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On some x86 systems the DSDT hides APCI devices to work around Windows
driver bugs. On one such system the device is even hidden until a certain
time after _SB.PCI0.GFX0.LCD.LCD1._ON gets called has passed *and*
_STA has been called at least 3 times since. TL;DR: it is a mess.
Until now the always_present_id matching was used to force status
for a whole class of devices, e.g. always enable PWM1 on CHerry Trail
devices.
This commit extends the always_present_id matching code to optionally
also check for a DMI match so that we can also add system specific
quirks to the always_present_id array.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Lenovo ThinkPad X1 Carbon - the 5th Generation, enabling an earlier
EC event freezing timing causes acpitz-virtual-0 to report a stuck
48C temparature. And with EC firmware revisioned as 1.14, without
reverting back to old EC event freezing timing, the fan still blows
up after a system resume.
This reverts the culprit change so that the regression can be fixed
without upgrading the EC firmware.
Fixes: d30283057e (ACPI / EC: Enable event freeze mode to improve event handling)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=191181#c168
Tested-by: Damjan Georgievski <gdamjan@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to bug reports, although the busy polling mode can make
noirq stages execute faster, it causes abnormal fan blowing up after
system resume (see the first link below for a video demonstration)
on Lenovo ThinkPad X1 Carbon - the 5th Generation. The problem can
be fixed by upgrading the EC firmware on that machine.
However, many reporters confirm that the problem can be fixed by
stopping busy polling during suspend/resume and for some of them
upgrading the EC firmware is not an option.
For this reason, drop the noirq stage hooks from the EC driver
to fix the regression.
Fixes: c3a696b6e8 (ACPI / EC: Use busy polling mode when GPE is not enabled)
Link: https://youtu.be/9NQ9x-Jm99Q
Link: https://bugzilla.kernel.org/show_bug.cgi?id=196129
Reported-by: Andreas Lindhe <andreas@lindhe.io>
Tested-by: Gjorgji Jankovski <j.gjorgji@gmail.com>
Tested-by: Damjan Georgievski <gdamjan@gmail.com>
Tested-by: Fernando Chaves <nanochaves@gmail.com>
Tested-by: Tomislav Ivek <tomislav.ivek@gmail.com>
Tested-by: Denis P. <theoriginal.skullburner@gmail.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function acpi_gsi_to_irq() must return 0 on success as the caller
ghes_probe expects an 0 for success. This change also matches x86
implementation.
This patch was submitted around 4.5 timeframe but wasn't pushed because
it didn't fix a real problem. Now that RAS/GHES patches are in kernel,
this fixes an error seen on a Mustang (arm64) platform:
GHES: Failed to map GSI to IRQ for generic hardware error source: 2
GHES: probe of GHES.2 failed with error 81
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Rearrange the core device properties code by moving the code
specific to each supported platform configuration framework
(ACPI, DT and build-in) into a separate file (Sakari Ailus).
- Add helper functions for accessing device properties in a
firmware-agnostic way (Sakari Ailus, Kieran Bingham).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZY/OvAAoJEILEb/54YlRx8NYP/3hL9jK8yBgDEVkoNnRDN7Xj
gefqm++3YO6wy8pfuACfNal2lJRFat5NDWdkBUsFA7LAfaLYe6jkIZ8YW+XTcHq7
H8dmFiDjfhVa4/urS6DTHmHqPyWLh4ayjTfwRP0yy2aW2XpXe1WNAgilLStu96iH
OU44HY5FQCQipnIIcuJZpJwH51AMyJIuAV5rQJySoIuDyULRKmVQ8G/xCAfhzHCH
tLcQHZnnYUdSCi29JwCu2RKKI6ta2o68EYmi1wxjvMEs2z27KVltCu+5Y9mpOIwl
DU+X8hAmepzd5aJxpR69hzM+dr71+0feUOklEU+r0DJzlmdDzTK8NyEPW2Ysh0aa
0SsdtgoRWv+kq0FuzL26fpa01WOcWB8N5uDp4XUZKFCriRmBk2HNc1KRoPtvILm2
2ISOqdIPe2/fC/FOYT0mKcFXaezkONpdbZoUqWGKFw0OWkgc5Vesl7L0LlilLCS6
XpHP/ISJBDfmIwjgaDjZIV1G6PkyaKu4tPkn9NsN+ztbH02dpTodIB0qDJSimyPX
cYwuDBn6NpKhk/l8b7lNMLxX8xK5EpQKw90av3LFYwZcGpyBzsoqciLONPSqF+1p
jHDK4yaV+Ddwo3q5368x+eXX/Y9hfDewikoAuAUG3y0cMzuwKwFZ7MRkfl1Azbcc
CLNeBd8YXBUnbzDMYaNB
=EcrF
-----END PGP SIGNATURE-----
Merge tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These mostly rearrange the device properties core code and add a few
helper functions to it as a foundation for future work.
Specifics:
- Rearrange the core device properties code by moving the code
specific to each supported platform configuration framework (ACPI,
DT and build-in) into a separate file (Sakari Ailus).
- Add helper functions for accessing device properties in a
firmware-agnostic way (Sakari Ailus, Kieran Bingham)"
* tag 'devprop-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Add fwnode_graph_get_port_parent
device property: Add FW type agnostic fwnode_graph_get_remote_node
device property: Introduce fwnode_device_is_available()
device property: Move fwnode graph ops to firmware specific locations
device property: Move FW type specific functionality to FW specific files
ACPI: Constify argument to acpi_device_is_present()
- Fix the ACPI code handling the SPCR table to check access
width of MMIO regions and add a workaround for APM X-Gene
8250 UART to use 32-bit MMIO accesses with its register
(Loc Ho).
- Fix two ACPI-based hotplug issues related to the handling of
hot-remove failures on the OS side (Chun-Yi Lee).
- Constify attribute_group structures in a few places (Arvind Yadav).
- Make one local function static (Colin Ian King).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=cdK6
-----END PGP SIGNATURE-----
Merge tag 'acpi-extra-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix the ACPI SPCR table handling and add a workaround for APM
X-Gene 8250 UART on top of that, fix two ACPI hotplug issues related
to hot-remove failures, add a missing "static" to one function and
constify some attribute_group structures.
Specifics:
- Fix the ACPI code handling the SPCR table to check access width of
MMIO regions and add a workaround for APM X-Gene 8250 UART to use
32-bit MMIO accesses with its register (Loc Ho).
- Fix two ACPI-based hotplug issues related to the handling of
hot-remove failures on the OS side (Chun-Yi Lee).
- Constify attribute_group structures in a few places (Arvind Yadav).
- Make one local function static (Colin Ian King)"
* tag 'acpi-extra-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / DPTF: constify attribute_group structures
ACPI / LPSS: constify attribute_group structures
ACPI: BGRT: constify attribute_group structures
ACPI / power: constify attribute_group structures
ACPI / scan: Indicate to platform when hot remove returns busy
ACPI / bus: handle ACPI hotplug schedule errors completely
ACPI / osi: Make local function acpi_osi_dmi_linux() static
ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata
ACPI: SPCR: Use access width to determine mmio usage
* Introduce the _flushcache() family of memory copy helpers and use them
for persistent memory write operations on x86. The _flushcache()
semantic indicates that the cache is either bypassed for the copy
operation (movnt) or any lines dirtied by the copy operation are
written back (clwb, clflushopt, or clflush).
* Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
* Add support for the new NVDIMM platform/firmware mechanisms introduced
in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
label format, extensions to the address-range-scrub command set, new
error injection commands, and a new BTT (block-translation-table)
layout. These updates support inter-OS and pre-OS compatibility.
* Fix a longstanding memory corruption bug in nfit_test.
* Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
* Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed:
commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime"
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
-----BEGIN PGP SIGNATURE-----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=xKQB
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"libnvdimm updates for the latest ACPI and UEFI specifications. This
pull request also includes new 'struct dax_operations' enabling to
undo the abuse of copy_user_nocache() for copy operations to pmem.
The dax work originally missed 4.12 to address concerns raised by Al.
Summary:
- Introduce the _flushcache() family of memory copy helpers and use
them for persistent memory write operations on x86. The
_flushcache() semantic indicates that the cache is either bypassed
for the copy operation (movnt) or any lines dirtied by the copy
operation are written back (clwb, clflushopt, or clflush).
- Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
- Add support for the new NVDIMM platform/firmware mechanisms
introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
namespace label format, extensions to the address-range-scrub
command set, new error injection commands, and a new BTT
(block-translation-table) layout. These updates support inter-OS
and pre-OS compatibility.
- Fix a longstanding memory corruption bug in nfit_test.
- Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
- Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed: commit
6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
<toshi.kani@hpe.com>"
* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
libnvdimm, namespace: record 'lbasize' for pmem namespaces
acpi/nfit: Issue Start ARS to retrieve existing records
libnvdimm: New ACPI 6.2 DSM functions
acpi, nfit: Show bus_dsm_mask in sysfs
libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
acpi, nfit: Enable DSM pass thru for root functions.
libnvdimm: passthru functions clear to send
libnvdimm, btt: convert some info messages to warn/err
libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
libnvdimm: fix the clear-error check in nsio_rw_bytes
libnvdimm, btt: fix btt_rw_page not returning errors
acpi, nfit: quiet invalid block-aperture-region warnings
libnvdimm, btt: BTT updates for UEFI 2.7 format
acpi, nfit: constify *_attribute_group
libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
libnvdimm, pmem, dax: export a cache control attribute
dax: convert to bitmask for flags
dax: remove default copy_from_iter fallback
libnvdimm, nfit: enable support for volatile ranges
libnvdimm, pmem: fix persistence warning
...
At least on the UP board SBC both PWMs are enabled leading to us
trying to add the same pwm_lookup twice, which leads to the following:
[ 0.902224] list_add double add: new=ffffffffb8efd400,
prev=ffffffffb8efd400, next=ffffffffb8eeede0.
[ 0.912466] ------------[ cut here ]------------
[ 0.917624] kernel BUG at lib/list_debug.c:31!
[ 0.922588] invalid opcode: 0000 [#1] SMP
...
[ 1.027450] Call Trace:
[ 1.030185] pwm_add_table+0x4c/0x90
[ 1.034181] bsw_pwm_setup+0x1a/0x20
[ 1.038175] acpi_lpss_create_device+0xfe/0x420
...
This commit fixes this by only calling pwm_add_table() for the first
PWM controller (which is the one used for the backlight).
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1458599
Fixes: bf7696a120 (acpi: lpss: call pwm_add_table() for BSW...)
Fixes: 04434ab512 (ACPI / LPSS: Call pwm_add_table() for Bay Trail...)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that lazy TLB suppresses all flush IPIs (as opposed to all but
the first), there's no need to leave_mm() when going idle.
This means we can get rid of the rcuidle hack in
switch_mm_irqs_off() and we can unexport leave_mm().
This also removes acpi_unlazy_tlb() from the x86 and ia64 headers,
since it has no callers any more.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Nadav Amit <nadav.amit@gmail.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/03c699cfd6021e467be650d6b73deaccfe4b4bd7.1498751203.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Update the ACPICA code in the kernel to upstream revision
revision 20170531 (which covers all of the new material from
ACPI 6.2) including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value
for HEST, header support for TPM2 table changes, and BGRT
Status field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ImFw
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These mostly update the ACPICA code in the kernel to upstream revision
20170531 which covers all of the new material from ACPI 6.2, including
new tables (WSMT, HMAT, PPTT), new subtables and definition changes
for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
descriptor macros for pin control, support for new predefined methods
(_LSI, _LSR, _LSW, _HMA), fixes and cleanups.
On top of that, an additional ACPICA change from Kees (which also is
upstream already) switches all of the definitions of function pointer
structures in ACPICA to use designated initializers so as to make the
structure layout randomization GCC plugin work with it.
The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
driver update, a new backlight blacklist entry, and update of the
tables configfs interface and a messages formatting cleanup.
Specifics:
- Update the ACPICA code in the kernel to upstream revision revision
20170531 (which covers all of the new material from ACPI 6.2)
including:
* Support for the PinFunction(), PinConfig(), PinGroup(),
PinGroupFunction(), and PinGroupConfig() resource descriptors
(Mika Westerberg).
* Support for new subtables in HEST and SRAT, new notify value for
HEST, header support for TPM2 table changes, and BGRT Status
field update (Bob Moore).
* Support for new PCCT subtables (David Box).
* Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
(Erik Schmauss).
* Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
* New UUID values for Processor Properties (Bob Moore).
* New notify values for memory attributes and graceful shutdown
(Bob Moore).
* Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
* Resource to AML conversion fix for resources containing GPIOs
(Mika Westerberg).
* Disassembler-related updates (Bob Moore, David Box, Erik
Schmauss).
* Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
Cao Jin).
- Modify ACPICA to always use designated initializers for function
pointer structures to make the structure layout randomization GCC
plugin work with it (Kees Cook).
- Update the tables configfs interface to unload SSDTs on configfs
entry removal (Jan Kiszka).
- Add support for the GPI1 regulator to the xpower PMIC Operation
Region handler (Hans de Goede).
- Fix ACPI EC issues related to conflicting EC definitions in the
ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
Chiu).
- Fix an interrupt storm issue in the EC driver and make its debug
output work with dynamic debug as expected (Lv Zheng).
- Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
- Fix whitespace in pr_fmt() to align log entries properly in some
places in the ACPI subsystem (Vincent Legoll)"
* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
ACPI / EC: Add quirk for GL720VMK
ACPI / EC: Fix media keys not working problem on some Asus laptops
ACPI / EC: Add support to skip boot stage DSDT probe
ACPI / EC: Enhance boot EC sanity check
ACPI / video: Add quirks for the Dell Precision 7510
ACPI: EC: Fix EC command visibility for dynamic debug
ACPI: EC: Fix an EC event IRQ storming issue
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
...
- Rework suspend-to-idle to allow it to take wakeup events signaled
by the EC into account on ACPI-based platforms in order to properly
support power button wakeup from suspend-to-idle on recent Dell
laptops (Rafael Wysocki).
That includes the core suspend-to-idle code rework, support for
the Low Power S0 _DSM interface, and support for the ACPI INT0002
Virtual GPIO device from Hans de Goede (required for USB keyboard
wakeup from suspend-to-idle to work on some machines).
- Stop trying to export the current CPU frequency via /proc/cpuinfo
on x86 as that is inaccurate and confusing (Len Brown).
- Rework the way in which the current CPU frequency is exported by
the kernel (over the cpufreq sysfs interface) on x86 systems with
the APERF and MPERF registers by always using values read from
these registers, when available, to compute the current frequency
regardless of which cpufreq driver is in use (Len Brown).
- Rework the PCI/ACPI device wakeup infrastructure to remove the
questionable and artificial distinction between "devices that
can wake up the system from sleep states" and "devices that can
generate wakeup signals in the working state" from it, which
allows the code to be simplified quite a bit (Rafael Wysocki).
- Fix the wakeup IRQ framework by making it use SRCU instead of
RCU which doesn't allow sleeping in the read-side critical
sections, but which in turn is expected to be allowed by the
IRQ bus locking infrastructure (Thomas Gleixner).
- Modify some computations in the intel_pstate driver to avoid
rounding errors resulting from them (Srinivas Pandruvada).
- Reduce the overhead of the intel_pstate driver in the HWP
(hardware-managed P-states) mode and when the "performance"
P-state selection algorithm is in use by making it avoid
registering scheduler callbacks in those cases (Len Brown).
- Rework the energy_performance_preference sysfs knob in
intel_pstate by changing the values that correspond to
different symbolic hint names used by it (Len Brown).
- Make it possible to use more than one cpuidle driver at the same
time on ARM (Daniel Lezcano).
- Make it possible to prevent the cpuidle menu governor from using
the 0 state by disabling it via sysfs (Nicholas Piggin).
- Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1
on AMD systems (Yazen Ghannam).
- Make the CPPC cpufreq driver take the lowest nonlinear performance
information into account (Prashanth Prakash).
- Add support for hi3660 to the cpufreq-dt driver, fix the
imx6q driver and clean up the sfi, exynos5440 and intel_pstate
drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila,
Rafael Wysocki, Tao Wang).
- Fix a few minor issues in the generic power domains (genpd)
framework and clean it up somewhat (Krzysztof Kozlowski,
Mikko Perttunen, Viresh Kumar).
- Fix a couple of minor issues in the operating performance points
(OPP) framework and clean it up somewhat (Viresh Kumar).
- Fix a CONFIG dependency in the hibernation core and clean it up
slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
- Add rk3228 support to the rockchip-io adaptive voltage scaling
(AVS) driver (David Wu).
- Fix an incorrect bit shift operation in the RAPL power capping
driver (Adam Lessnau).
- Add support for the EPP field in the HWP (hardware managed
P-states) control register, HWP.EPP, to the x86_energy_perf_policy
tool and update msr-index.h with HWP.EPP values (Len Brown).
- Fix some minor issues in the turbostat tool (Len Brown).
- Add support for AMD family 0x17 CPUs to the cpupower tool and fix
a minor issue in it (Sherry Hurwitz).
- Assorted cleanups, mostly related to the constification of some
data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
Kozlowski).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Wsph
-----END PGP SIGNATURE-----
Merge tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The big ticket items here are the rework of suspend-to-idle in order
to add proper support for power button wakeup from it on recent Dell
laptops and the rework of interfaces exporting the current CPU
frequency on x86.
In addition to that, support for a few new pieces of hardware is
added, the PCI/ACPI device wakeup infrastructure is simplified
significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
bus locking infrastructure.
Also, there are some functional improvements for intel_pstate, tools
updates and small fixes and cleanups all over.
Specifics:
- Rework suspend-to-idle to allow it to take wakeup events signaled
by the EC into account on ACPI-based platforms in order to properly
support power button wakeup from suspend-to-idle on recent Dell
laptops (Rafael Wysocki).
That includes the core suspend-to-idle code rework, support for the
Low Power S0 _DSM interface, and support for the ACPI INT0002
Virtual GPIO device from Hans de Goede (required for USB keyboard
wakeup from suspend-to-idle to work on some machines).
- Stop trying to export the current CPU frequency via /proc/cpuinfo
on x86 as that is inaccurate and confusing (Len Brown).
- Rework the way in which the current CPU frequency is exported by
the kernel (over the cpufreq sysfs interface) on x86 systems with
the APERF and MPERF registers by always using values read from
these registers, when available, to compute the current frequency
regardless of which cpufreq driver is in use (Len Brown).
- Rework the PCI/ACPI device wakeup infrastructure to remove the
questionable and artificial distinction between "devices that can
wake up the system from sleep states" and "devices that can
generate wakeup signals in the working state" from it, which allows
the code to be simplified quite a bit (Rafael Wysocki).
- Fix the wakeup IRQ framework by making it use SRCU instead of RCU
which doesn't allow sleeping in the read-side critical sections,
but which in turn is expected to be allowed by the IRQ bus locking
infrastructure (Thomas Gleixner).
- Modify some computations in the intel_pstate driver to avoid
rounding errors resulting from them (Srinivas Pandruvada).
- Reduce the overhead of the intel_pstate driver in the HWP
(hardware-managed P-states) mode and when the "performance" P-state
selection algorithm is in use by making it avoid registering
scheduler callbacks in those cases (Len Brown).
- Rework the energy_performance_preference sysfs knob in intel_pstate
by changing the values that correspond to different symbolic hint
names used by it (Len Brown).
- Make it possible to use more than one cpuidle driver at the same
time on ARM (Daniel Lezcano).
- Make it possible to prevent the cpuidle menu governor from using
the 0 state by disabling it via sysfs (Nicholas Piggin).
- Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
AMD systems (Yazen Ghannam).
- Make the CPPC cpufreq driver take the lowest nonlinear performance
information into account (Prashanth Prakash).
- Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
driver and clean up the sfi, exynos5440 and intel_pstate drivers
(Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
Wysocki, Tao Wang).
- Fix a few minor issues in the generic power domains (genpd)
framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
Perttunen, Viresh Kumar).
- Fix a couple of minor issues in the operating performance points
(OPP) framework and clean it up somewhat (Viresh Kumar).
- Fix a CONFIG dependency in the hibernation core and clean it up
slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
- Add rk3228 support to the rockchip-io adaptive voltage scaling
(AVS) driver (David Wu).
- Fix an incorrect bit shift operation in the RAPL power capping
driver (Adam Lessnau).
- Add support for the EPP field in the HWP (hardware managed
P-states) control register, HWP.EPP, to the x86_energy_perf_policy
tool and update msr-index.h with HWP.EPP values (Len Brown).
- Fix some minor issues in the turbostat tool (Len Brown).
- Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
minor issue in it (Sherry Hurwitz).
- Assorted cleanups, mostly related to the constification of some
data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
Kozlowski)"
* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
cpufreq: Update scaling_cur_freq documentation
cpufreq: intel_pstate: Clean up after performance governor changes
PM: hibernate: constify attribute_group structures.
cpuidle: menu: allow state 0 to be disabled
intel_idle: Use more common logging style
PM / Domains: Fix missing default_power_down_ok comment
PM / Domains: Fix unsafe iteration over modified list of domains
PM / Domains: Fix unsafe iteration over modified list of domain providers
PM / Domains: Fix unsafe iteration over modified list of device links
PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
PM / Domains: Call driver's noirq callbacks
PM / core: Drop run_wake flag from struct dev_pm_info
PCI / PM: Simplify device wakeup settings code
PCI / PM: Drop pme_interrupt flag from struct pci_dev
ACPI / PM: Consolidate device wakeup settings code
ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
PM / QoS: constify *_attribute_group.
PM / AVS: rockchip-io: add io selectors and supplies for rk3228
powercap/RAPL: prevent overridding bits outside of the mask
PM / sysfs: Constify attribute groups
...
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
904 496 0 1400 578 drivers/acpi/dptf/dptf_power.o
File size After adding 'const':
text data bss dec hex filename
944 432 0 1376 560 drivers/acpi/dptf/dptf_power.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4622 304 8 4934 1346 drivers/acpi/power.o
File size After adding 'const':
text data bss dec hex filename
4846 80 8 4934 1346 drivers/acpi/power.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In hotplug logic, it always indicates non-specific failure to
platform through _OST when handing ACPI hot-remove event failed. Then
platform terminates the hot-remove process but it can not identify
the reason.
Base on current hot-remove code, there have two situations that it
returns busy:
- OSPM try to offline an individual device, but the device offline
function returns "busy".
- When the ejection event is applied to an "not offlined yet"
container. OSPM sends a kobject change event to userspace and
returns "busy".
Both of them will returns -EBUSY to ACPI device hotplug function.
Then, the hotplug function indicates non-specific failure to platform
just like for any other error, e.g. -ENODEV or -EIO.
The benefit to the platform for identifying the OS "busy" state is
that it can use a different approach to handle the "busy" instead of
simply terminating the hot-remove operation for an unknown reason.
For example, the platform can wait for a while and then re-trigger
hot-remove.
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
[ rjw: Changelog massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Kernel should decrements the reference count of ACPI device
when the scheduling of ACPI hotplug work failed, and evaluates
_OST to notify BIOS the failure.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function acpi_osi_dmi_linux() is local and does not need to be in
global scope, so make it static.
Cleans up sparse warning:
"symbol 'acpi_osi_dmi_linux' was not declared. Should it be static?"
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
APM X-Gene verion 1 and 2 have an 8250 UART with its register
aligned to 32-bit. In addition, the latest released BIOS
encodes the access field as 8-bit access instead 32-bit access.
This causes no console with ACPI boot as the console
will not match X-Gene UART port due to the lack of mmio32
option.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current SPCR code does not check the access width of the MMIO, and
uses a default of 8bit register accesses. This prevents devices that
only do 16 or 32bit register accesses from working. By simply checking
this field and setting the MMIO string appropriately, this issue can be
corrected. To prevent any legacy issues, the code will default to 8bit
accesses if the value is anything but 16 or 32.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull RAS updates from Thomas Gleixner:
"The RAS updates for the 4.13 merge window:
- Cleanup of the MCE injection facility (Borsilav Petkov)
- Rework of the AMD/SMCA handling (Yazen Ghannam)
- Enhancements for ACPI/APEI to handle new notitication types (Shiju
Jose)
- atomic_t to refcount_t conversion (Elena Reshetova)
- A few fixes and enhancements all over the place"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
RAS/CEC: Check the correct variable in the debugfs error handling
x86/mce: Always save severity in machine_check_poll()
x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise
x86/mce: Update bootlog description to reflect behavior on AMD
x86/mce: Don't disable MCA banks when offlining a CPU on AMD
x86/mce/mce-inject: Preset the MCE injection struct
x86/mce: Clean up include files
x86/mce: Get rid of register_mce_write_callback()
x86/mce: Merge mce_amd_inj into mce-inject
x86/mce/AMD: Use saved threshold block info in interrupt handler
x86/mce/AMD: Use msr_stat when clearing MCA_STATUS
x86/mce/AMD: Carve out SMCA bank configuration
x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers
x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t
RAS: Make local function parse_ras_param() static
ACPI/APEI: Handle GSIV and GPIO notification types
Pull SMP hotplug updates from Thomas Gleixner:
"This update is primarily a cleanup of the CPU hotplug locking code.
The hotplug locking mechanism is an open coded RWSEM, which allows
recursive locking. The main problem with that is the recursive nature
as it evades the full lockdep coverage and hides potential deadlocks.
The rework replaces the open coded RWSEM with a percpu RWSEM and
establishes full lockdep coverage that way.
The bulk of the changes fix up recursive locking issues and address
the now fully reported potential deadlocks all over the place. Some of
these deadlocks have been observed in the RT tree, but on mainline the
probability was low enough to hide them away."
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
cpu/hotplug: Constify attribute_group structures
powerpc: Only obtain cpu_hotplug_lock if called by rtasd
ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
cpu/hotplug: Remove unused check_for_tasks() function
perf/core: Don't release cred_guard_mutex if not taken
cpuhotplug: Link lock stacks for hotplug callbacks
acpi/processor: Prevent cpu hotplug deadlock
sched: Provide is_percpu_thread() helper
cpu/hotplug: Convert hotplug locking to percpu rwsem
s390: Prevent hotplug rwsem recursion
arm: Prevent hotplug rwsem recursion
arm64: Prevent cpu hotplug rwsem recursion
kprobes: Cure hotplug lock ordering issues
jump_label: Reorder hotplug lock and jump_label_lock
perf/tracing/cpuhotplug: Fix locking order
ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
PCI: Replace the racy recursion prevention
PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
x86/perf: Drop EXPORT of perf_check_microcode
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle were:
- Add the SYSTEM_SCHEDULING bootup state to move various scheduler
debug checks earlier into the bootup. This turns silent and
sporadically deadly bugs into nice, deterministic splats. Fix some
of the splats that triggered. (Thomas Gleixner)
- A round of restructuring and refactoring of the load-balancing and
topology code (Peter Zijlstra)
- Another round of consolidating ~20 of incremental scheduler code
history: this time in terms of wait-queue nomenclature. (I didn't
get much feedback on these renaming patches, and we can still
easily change any names I might have misplaced, so if anyone hates
a new name, please holler and I'll fix it.) (Ingo Molnar)
- sched/numa improvements, fixes and updates (Rik van Riel)
- Another round of x86/tsc scheduler clock code improvements, in hope
of making it more robust (Peter Zijlstra)
- Improve NOHZ behavior (Frederic Weisbecker)
- Deadline scheduler improvements and fixes (Luca Abeni, Daniel
Bristot de Oliveira)
- Simplify and optimize the topology setup code (Lauro Ramos
Venancio)
- Debloat and decouple scheduler code some more (Nicolas Pitre)
- Simplify code by making better use of llist primitives (Byungchul
Park)
- ... plus other fixes and improvements"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
sched/cputime: Refactor the cputime_adjust() code
sched/debug: Expose the number of RT/DL tasks that can migrate
sched/numa: Hide numa_wake_affine() from UP build
sched/fair: Remove effective_load()
sched/numa: Implement NUMA node level wake_affine()
sched/fair: Simplify wake_affine() for the single socket case
sched/numa: Override part of migrate_degrades_locality() when idle balancing
sched/rt: Move RT related code from sched/core.c to sched/rt.c
sched/deadline: Move DL related code from sched/core.c to sched/deadline.c
sched/cpuset: Only offer CONFIG_CPUSETS if SMP is enabled
sched/fair: Spare idle load balancing on nohz_full CPUs
nohz: Move idle balancer registration to the idle path
sched/loadavg: Generalize "_idle" naming to "_nohz"
sched/core: Drop the unused try_get_task_struct() helper function
sched/fair: WARN() and refuse to set buddy when !se->on_rq
sched/debug: Fix SCHED_WARN_ON() to return a value on !CONFIG_SCHED_DEBUG as well
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming
sched/wait: Move bit_wait_table[] and related functionality from sched/core.c to sched/wait_bit.c
sched/wait: Split out the wait_bit*() APIs from <linux/wait.h> into <linux/wait_bit.h>
sched/wait: Re-adjust macro line continuation backslashes in <linux/wait.h>
...
- introduce the new uuid_t/guid_t types that are going to replace
the somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS
and libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)
-----BEGIN PGP SIGNATURE-----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=J/4P
-----END PGP SIGNATURE-----
Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid
Pull uuid subsystem from Christoph Hellwig:
"This is the new uuid subsystem, in which Amir, Andy and I have started
consolidating our uuid/guid helpers and improving the types used for
them. Note that various other subsystems have pulled in this tree, so
I'd like it to go in early.
UUID/GUID summary:
- introduce the new uuid_t/guid_t types that are going to replace the
somewhat confusing uuid_be/uuid_le types and make the terminology
fit the various specs, as well as the userspace libuuid library.
(me, based on a previous version from Amir)
- consolidated generic uuid/guid helper functions lifted from XFS and
libnvdimm (Amir and me)
- conversions to the new types and helpers (Amir, Andy and me)"
* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
ACPI: hns_dsaf_acpi_dsm_guid can be static
mmc: sdhci-pci: make guid intel_dsm_guid static
uuid: Take const on input of uuid_is_null() and guid_is_null()
thermal: int340x_thermal: fix compile after the UUID API switch
thermal: int340x_thermal: Switch to use new generic UUID API
acpi: always include uuid.h
ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
ACPI / extlog: Switch to use new generic UUID API
ACPI / bus: Switch to use new generic UUID API
ACPI / APEI: Switch to use new generic UUID API
acpi, nfit: Switch to use new generic UUID API
MAINTAINERS: add uuid entry
tmpfs: generate random sb->s_uuid
scsi_debug: switch to uuid_t
nvme: switch to uuid_t
sysctl: switch to use uuid_t
partitions/ldm: switch to use uuid_t
overlayfs: use uuid_t instead of uuid_be
fs: switch ->s_uuid to uuid_t
ima/policy: switch to use uuid_t
...
* acpi-pmic:
ACPI / PMIC: xpower: Add support for the GPI1 regulator to the OpRegion handler
* acpi-misc:
ACPI: fix whitespace in pr_fmt() to align log entries
* acpi-tables:
ACPI: configfs: Unload SSDT on configfs entry removal
* acpica: (53 commits)
ACPICA: Use designated initializers
ACPICA: Update version to 20170531
ACPICA: Update a couple of debug output messages
ACPICA: acpiexec: enhance local signal handler
ACPICA: Simplify output for the ACPI Debug Object
ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
ACPICA: Improvements for debug output only
ACPICA: Disassembler: allow conflicting external declarations to be emitted.
ACPICA: Disassembler: add external op to namespace on first pass
ACPICA: Disassembler: prevent external op's from opening a new scope
ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
ACPICA: Changing External to a named object
ACPICA: Update two error messages to emit control method name
ACPICA: Fix for Device/Thermal objects with ObjectType and DerefOf
ACPICA: Comment update: spelling/format. No functional change
ACPICA: Update comments, no functional change
ACPICA: Split resource descriptor decode strings to a new file
ACPICA: Remove extraneous status check
ACPICA: Export the public mutex interfaces
ACPICA: Disassembler: Abort on an invalid/unknown AML opcode
...
* acpi-pm:
PM / core: Drop run_wake flag from struct dev_pm_info
PCI / PM: Simplify device wakeup settings code
PCI / PM: Drop pme_interrupt flag from struct pci_dev
ACPI / PM: Consolidate device wakeup settings code
ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
ACPI / sleep: EC-based wakeup from suspend-to-idle on recent systems
platform: x86: intel-hid: Wake up the system from suspend-to-idle
platform: x86: intel-vbtn: Wake up the system from suspend-to-idle
ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle
platform/x86: Add driver for ACPI INT0002 Virtual GPIO device
PCI / PM: Restore PME Enable if skipping wakeup setup
PM / sleep: Print timing information if debug is enabled
ACPI / PM: Clean up device wakeup enable/disable code
ACPI / PM: Change log level of wakeup-related message
USB / PCI / PM: Allow the PCI core to do the resume cleanup
ACPI / PM: Run wakeup notify handlers synchronously
Conflicts:
drivers/base/power/main.c
ACPI 6.2 defines in section 9.20.7.2 that the OSPM may call a Start
ARS with Flags Bit [1] set upon receiving the 0x81 notification.
Upon receiving the notification, the OSPM may decide to issue
a Start ARS with Flags Bit [1] set to prepare for the retrieval
of existing records and issue the Query ARS Status function to
retrieve the records.
Add support to call a Start ARS from acpi_nfit_uc_error_notify()
with ND_ARS_RETURN_PREV_DATA set when HW_ERROR_SCRUB_ON is not set.
Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdf
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Display bus_dsm_mask in sysfs as /sys/bus/nd/devices/ndbusX/nfit/dsm_mask.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add a bus level dsm_mask to nvdimm_bus_descriptor to allow the passthru
calling mechanism to specify a different mask from the cmd_mask.
Populate bus_dsm_mask and use it to filter dsm calls that user can
make through the pass thru interface.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
[djbw: use command number constants instead of a magic mask value]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Set ND_CMD_CALL in the cmd_mask to enable calling root
functions via the pass thru mechanism.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Linus Torvalds
Meng Xu
Rafael J. Wysocki
Dan Williams
Robin Murphy
Punit Agrawal
Boqun Feng
Toshi Kani
Yazen Ghannam
Ingo Molnar
Bhumika Goyal
Tony Luck
gengdongjiu
Colin Ian King
Sakari Ailus
Lv Zheng
Srinivas Pandruvada
Graeme Gregory
Arnd Bergmann
Ronald Tschalär
Ganapatrao Kulkarni
Lorenzo Pieralisi
Erik Schmauss
Bob Moore
Amitoj Kaur Chawla
Lukas Wunner
Jean Delvare
Loc Ho
Timur Tabi
Hanjun Guo
Andy Shevchenko
Ryan Kennedy
Sumeet Pawnikar
Hans de Goede
Ross Zwisler
Alex James
Kees Cook
Prarit Bhargava
Alex Hung
Mark Salter
Andy Lutomirski
Arvind Yadav
Lee, Chun-Yi
Jerry Hoemann