The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.
Signed-off-by: David Sterba <dsterba@suse.com>
All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.
A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,
scrub_handle_errored_block
scrub_recheck_block # re-read pages one by one
scrub_recheck_block # rebuild by calling raid56_parity_recover()
page by page
Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.
This makes it smarter by doing raid56 scrub/replace on stripe length.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.
This patch adds a mount option nossd_spread that disables ssd_spread
only.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since userspace transaction have been removed we no longer have use
for this field so delete it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 3558d4f88e ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).
This can be triggered by fstests btrfs/152.
The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.
Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.
Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.
The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache. The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.
eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the call to EXT4_ERROR_INODE() into ext4_xattr_check_block().
This simplifies the code, and fixes a problem where not all callers of
ext4_xattr_check_block() were not resulting in ext4_error() getting
called when the xattr block is corrupted.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Previously, mount -l would show data=<mode> even if the ext4 default
journaling mode was being used. Change this to be consistent with the
rest of the options.
Ext4 already did the right thing when the journaling mode being used
matched the one specified in the superblock's default mount options. The
reason it failed to do the right thing for the ext4 defaults is that,
when set, they were never included in sbi->s_def_mount_opt (unlike the
superblock's defaults, which were).
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Don't show init_itable=n in /proc/fs/ext4/<dev>/options when filesystem
is mounted with noinit_itable.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Previously, /proc/fs/ext4/<dev>/options would only show binary options
if they were set (1 in the options bit mask). E.g. it would show "grpid"
if it was set, but it would not show "nogrpid" if grpid was not set.
This seems sensible, but when an option is absent from the file, it can
be hard for the unfamiliar to know what is being used. E.g. if there
isn't a (no)grpid entry, nogrpid is in effect. But if there isn't a
(no)auto_da_alloc entry, auto_da_alloc is in effect. If there isn't a
(minixdf|bsddf) entry, it turns out bsddf is in effect. It all depends
on how the option is implemented.
It's clearer to be explicit, so print the corresponding option
regardless of whether it means a 1 or a 0 in the bit mask.
Note that options which do not have an explicit disable option aren't
indicated as being disabled even with this change (e.g. dax).
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace kset with generic kobject provided by kobject_create_and_add(),
since the latter is sufficient.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Make cleanup of ext4_feat kobject consistent with similar objects.
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If some metadata block, such as an allocation bitmap, overlaps the
superblock, it's very likely that if the file system is mounted
read/write, the results will not be pretty. So disallow r/w mounts
for file systems corrupted in this particular way.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
If the root directory has an i_links_count of zero, then when the file
system is mounted, then when ext4_fill_super() notices the problem and
tries to call iput() the root directory in the error return path,
ext4_evict_inode() will try to free the inode on disk, before all of
the file system structures are set up, and this will result in an OOPS
caused by a NULL pointer dereference.
This issue has been assigned CVE-2018-1092.
https://bugzilla.kernel.org/show_bug.cgi?id=199179https://bugzilla.redhat.com/show_bug.cgi?id=1560777
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Currently d_move(from, to) does the following:
* name/parent of from <- old name/parent of to, from hashed there
* to is unhashed
* name of to is preserved
* if from used to be detached, to gets detached
* if from used to be attached, parent of to <- old parent of from.
That's both user-visibly bogus and complicates reasoning a lot.
Much saner semantics would be
* name/parent of from <- name/parent of to, from hashed there.
* to is unhashed
* name/parent of to is unchanged.
The price, of course, is that old parent of from might lose a reference.
However,
* all potentially cross-directory callers of d_move() have both
parents pinned directly; typically, dentries themselves are grabbed
only after we have grabbed and locked both parents. IOW, the decrement
of old parent's refcount in case of d_move() won't reach zero.
* __d_move() from d_splice_alias() is done to detached alias.
No refcount decrements in that case
* __d_move() from __d_unalias() *can* get the refcount to zero.
So let's grab a reference to alias' old parent before calling __d_unalias()
and dput() it after we'd dropped rename_lock.
That does make d_splice_alias() potentially blocking. However, it has
no callers in non-sleepable contexts (and the case where we'd grown
that dget/dput pair is _very_ rare, so performance is not an issue).
Another thing that needs adjustment is unlocking in the end of __d_move();
folded it in. And cleaned the remnants of bogus ordering from the
"lock them in the beginning" counterpart - it's never been right and
now (well, for 7 years now) we have that thing always serialized on
rename_lock anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
shrink_dentry_list() holds dentry->d_lock and needs to acquire
dentry->d_inode->i_lock. This cannot be done with a spin_lock()
operation because it's the reverse of the regular lock order.
To avoid ABBA deadlocks it is done with a trylock loop.
Trylock loops are problematic in two scenarios:
1) PREEMPT_RT converts spinlocks to 'sleeping' spinlocks, which are
preemptible. As a consequence the i_lock holder can be preempted
by a higher priority task. If that task executes the trylock loop
it will do so forever and live lock.
2) In virtual machines trylock loops are problematic as well. The
VCPU on which the i_lock holder runs can be scheduled out and a
task on a different VCPU can loop for a whole time slice. In the
worst case this can lead to starvation. Commits 47be61845c
("fs/dcache.c: avoid soft-lockup in dput()") and 046b961b45
("shrink_dentry_list(): take parent's d_lock earlier") are
addressing exactly those symptoms.
Avoid the trylock loop by using dentry_kill(). When pruning ancestors,
the same code applies that is used to kill a dentry in dput(). This
also has the benefit that the locking order is now the same. First
the inode is locked, then the parent.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In case when trylock in there fails, deal with it directly in
dentry_kill(). Note that in cases when we drop and retake
->d_lock, we need to recheck whether to retain the dentry.
Another thing is that dropping/retaking ->d_lock might have
ended up with negative dentry turning into positive; that,
of course, can happen only once...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In case of trylock failure don't re-add to the list - drop the locks
and carefully get them in the right order. For shrink_dentry_list(),
somebody having grabbed a reference to dentry means that we can
kick it off-list, so if we find dentry being modified under us we
don't need to play silly buggers with retries anyway - off the list
it is.
The locking logics taken out into a helper of its own; lock_parent()
is no longer used for dentries that can be killed under us.
[fix from Eric Biggers folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
ext4 isn't validating the sizes of xattrs where the value of the xattr
is stored in an external inode. This is problematic because
->e_value_size is a u32, but ext4_xattr_get() returns an int. A very
large size is misinterpreted as an error code, which ext4_get_acl()
translates into a bogus ERR_PTR() for which IS_ERR() returns false,
causing a crash.
Fix this by validating that all xattrs are <= INT_MAX bytes.
This issue has been assigned CVE-2018-1095.
https://bugzilla.kernel.org/show_bug.cgi?id=199185https://bugzilla.redhat.com/show_bug.cgi?id=1560793
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Fixes: e50e5129f3 ("ext4: xattr-in-inode support")
This patch spits out the time taken by the various steps in the
journal recover process. Previously, the journal recovery time
didn't account for finding the journal head in the log which takes
up a significant portion of time.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Today if we run xfs_fsr and crash[1], log replay can fail because
the recovery code tries to instantiate the donor inode from
disk to replay the swapext, but it's been deleted and we get
verifier failures when we try to read the inode off disk with
i_mode == 0.
This fixes both sides: We don't log the swapext change if the
inode has been deleted, and we don't try to recover it either.
[1] or if systemd doesn't cleanly unmount root, as it is wont
to do ...
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of zeroing out fallocated blocks in gfs2_iomap_alloc, zero them
out in fallocate_chunk, much higher up the call stack. This gets rid of
gfs2's abuse of the IOMAP_ZERO flag as well as the gfs2 specific zeronew
buffer flag. I can't think of a reason why zeroing out the blocks in
gfs2_iomap_alloc would have any benefits: there is no additional locking
at that level that would add protection to the newly allocated blocks.
While at it, change fallocate over from gs2_block_map to gfs2_iomap_begin.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
In rxrpc and afs, use the debug_ids that are monotonically allocated to
various objects as they're allocated rather than pointers as kernel
pointers are now hashed making them less useful. Further, the debug ids
aren't reused anywhere nearly as quickly.
In addition, allow kernel services that use rxrpc, such as afs, to take
numbers from the rxrpc counter, assign them to their own call struct and
pass them in to rxrpc for both client and service calls so that the trace
lines for each will have the same ID tag.
Signed-off-by: David Howells <dhowells@redhat.com>
Synchronous pernet_operations are not allowed anymore.
All are asynchronous. So, drop the structure member.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations look similar to rpcsec_gss_net_ops,
they just create and destroy another caches. So, they also
can be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes spelling typos found in printk.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These pernet_operations create and destroy per-net pipe
and dentry, and they seem safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations look similar to rpcsec_gss_net_ops,
they just create and destroy another cache. Also they create
and destroy directory. So, they also look safe to be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Anna Schumaker <Anna.Schumaker@netapp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the generic data structures embedded in xfs_mount are
dynamically initialized immediately after mp is allocated. A few
fields are left out and initialized during the xfs_mountfs()
sequence, after mp has been attached to the superblock.
To clean this up and help prevent premature access of associated
fields, refactor xfs_mount allocation and all dependent init calls
into a new helper. This self-documents that all low level data
structures (i.e., locks, trees, etc.) should be initialized before
xfs_mount is attached to the superblock.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.
If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
async_missing_raid56() is identical to async_read_rebuild().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.
Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found. Removal of label out_err also simplifies the
function.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.
By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").
The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).
$ cat test_send.sh
#!/bin/bash
SRC_DEV=/dev/sdc
DST_DEV=/dev/sdd
SRC_MNT=/mnt/sdc
DST_MNT=/mnt/sdd
mkfs.btrfs -f $SRC_DEV >/dev/null
mkfs.btrfs -f $DST_DEV >/dev/null
mount $SRC_DEV $SRC_MNT
mount $DST_DEV $DST_MNT
echo "Creating source filesystem"
for ((t = 0; t < 10; t++)); do
(
for ((i = 1; i <= 20000; i++)); do
xfs_io -f -c "pwrite -S 0xab 0 5000" \
$SRC_MNT/file_$i > /dev/null
done
) &
worker_pids[$t]=$!
done
wait ${worker_pids[@]}
echo "Creating and sending snapshot"
btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
/usr/bin/time -f "send took %e seconds" \
btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
/usr/bin/time -f "receive took %e seconds" \
btrfs receive -f $SRC_MNT/send_file $DST_MNT
umount $SRC_MNT
umount $DST_MNT
The results, which are averages for 5 runs for each case, were the
following:
* Without this change
average receive time was 26.49 seconds
standard deviation of 2.53 seconds
* Without this change and with the truncate fix
average receive time was 12.51 seconds
standard deviation of 0.32 seconds
* With this change and without the truncate fix
average receive time was 10.02 seconds
standard deviation of 1.11 seconds
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.
This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).
So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.
The following script was used to quickly measure the time a receive
operation takes:
$ cat test_send.sh
#!/bin/bash
SRC_DEV=/dev/sdc
DST_DEV=/dev/sdd
SRC_MNT=/mnt/sdc
DST_MNT=/mnt/sdd
mkfs.btrfs -f $SRC_DEV >/dev/null
mkfs.btrfs -f $DST_DEV >/dev/null
mount $SRC_DEV $SRC_MNT
mount $DST_DEV $DST_MNT
echo "Creating source filesystem"
for ((t = 0; t < 10; t++)); do
(
for ((i = 1; i <= 20000; i++)); do
xfs_io -f -c "pwrite -S 0xab 0 5000" \
$SRC_MNT/file_$i > /dev/null
done
) &
worker_pids[$t]=$!
done
wait ${worker_pids[@]}
echo "Creating and sending snapshot"
btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
/usr/bin/time -f "send took %e seconds" \
btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
/usr/bin/time -f "receive took %e seconds" \
btrfs receive -f $SRC_MNT/send_file $DST_MNT
umount $SRC_MNT
umount $DST_MNT
The results for 5 runs were the following:
* Without this change
average receive time was 26.49 seconds
standard deviation of 2.53 seconds
* With this change
average receive time was 12.51 seconds
standard deviation of 0.32 seconds
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:
- RMW operations that have a return value are fully ordered;
Fully ordered primitives are ordered against everything prior and
everything subsequent. Therefore a fully ordered primitive is like
having an smp_mb() before and an smp_mb() after the primitive.
Given this let's replace the extra memory barriers with comments.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the same function we just ran btrfs_alloc_device() which means the
btrfs_device::resized_list is sure to be empty and we are protected
with the btrfs_fs_info::volume_mutex.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The __cold functions are placed to a special section, as they're
expected to be called rarely. This could help i-cache prefetches or help
compiler to decide which branches are more/less likely to be taken
without any other annotations needed.
Though we can't add more __exit annotations, it's still possible to add
__cold (that's also added with __exit). That way the following function
categories are tagged:
- printf wrappers, error messages
- exit helpers
Signed-off-by: David Sterba <dsterba@suse.com>
Recently, the __init annotations have been added. There's unfortunatelly
only one case where we can add __exit, because most of the cleanup
helpers are also called from the __init phase.
As the __exit annotated functions get discarded completely for a
built-in code, we'd miss them from the init phase.
Signed-off-by: David Sterba <dsterba@suse.com>
We aren't verifying the parameter passed to the subvolid mount option,
so we won't report and fail the mount if a junk value is specified for
example, -o subvolid=abc.
This patch verifies the subvolid option with match_u64.
Up to now the memparse function accepts the K/M/G/ suffixes, that are
usually meant for size values and do not make sense for a subvolume it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Fstests generic/475 provides a way to fail metadata reads while
checking if checksum exists for the inode inside run_delalloc_nocow(),
and csum_exist_in_range() interprets error (-EIO) as inode having
checksum and makes its caller enter the cow path.
In case of free space inode, this ends up with a warning in
cow_file_range().
The same problem applies to btrfs_cross_ref_exist() since it may also
read metadata in between.
With this, run_delalloc_nocow() bails out when errors occur at the two
places.
cc: <stable@vger.kernel.org> v2.6.28+
Fixes: 17d217fe97 ("Btrfs: fix nodatasum handling in balancing code")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The custom crc32 init code was introduced in
14a958e678 ("Btrfs: fix btrfs boot when compiled as built-in") to
enable using btrfs as a built-in. However, later as pointed out by
60efa5eb2e ("Btrfs: use late_initcall instead of module_init") this
wasn't enough and finally btrfs was switched to late_initcall which
comes after the generic crc32c implementation is initiliased. The
latter commit superseeded the former. Now that we don't have to
maintain our own code let's just remove it and switch to using the
generic implementation.
Despite touching a lot of files the patch is really simple. Here is the gist of
the changes:
1. Select LIBCRC32C rather than the low-level modules.
2. s/btrfs_crc32c/crc32c/g
3. replace hash.h with linux/crc32c.h
4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly.
I've tested this with btrfs being both a module and a built-in and xfstest
doesn't complain.
Does seem to fix the longstanding problem of not automatically selectiong
the crc32c module when btrfs is used. Possibly there is a workaround in
dracut.
The modinfo confirms that now all the module dependencies are there:
before:
depends: zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
after:
depends: libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add more info to changelog from mails ]
Signed-off-by: David Sterba <dsterba@suse.com>
Function __get_raid_index() is used to convert block group flags into
raid index, which can be used to get various info directly from
btrfs_raid_array[].
Refactor this function a little:
1) Rename to btrfs_bg_flags_to_raid_index()
Double underline prefix is normally for internal functions, while the
function is used by both extent-tree and volumes.
Although the name is a little longer, but it should explain its usage
quite well.
2) Move it to volumes.h and make it static inline
Just several if-else branches, really no need to define it as a normal
function.
This also makes later code re-use between kernel and btrfs-progs
easier.
3) Remove function get_block_group_index()
Really no need to do such a simple thing as an exported function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When inspecting the error message with real corruption, the "root=%llu"
always shows "1" (root tree), instead of the correct owner.
The problem is that we are getting @root from page->mapping->host, which
points the same btree inode, so we will always get the same root.
This makes the root owner output meaningless, and harder to port
tree-checker to btrfs-progs.
So get rid of the false and meaningless @root parameter and replace it
with @fs_info.
To get the owner, we can only rely on btrfs_header_owner() now.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the
subtle bugs around merge_extent_mapping.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs_run_qgroups is doing a bit too much. Not only is it
responsible for synchronizing in-memory state of qgroups to disk but
it also contains code to trigger the initial qgroup rescan when
quota is enabled initially. This condition is detected by checking that
BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set.
Nothing really requires from the code to be structured (and scattered)
the way it is so let's streamline things. First move the quota rescan
code into btrfs_quota_enable, where its invocation is closer to the
use. This also makes the FS_QUOTA_ENABLING flag redundant so let's
remove it as well.
This has been tested with a full xfstest run with qgroups enabled on
the scratch device of every xfstest and no regressions were observed.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
load_free_space_tree calls either function load_free_space_bitmaps or
load_free_space_extents. And either of those two will lead to call
btrfs_next_item. So in function load_free_space_tree, use READA_FORWARD
to read forward ahead.
This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
populate_free_space_tree calls function btrfs_search_slot_for_read with
parameter int find_higher = 1, it means that, if no exact match is
found, then use the next higher item. So in function
populate_free_space_tree, use READA_FORWARD to read forward ahead.
This also changes the value from READA_BACK to READA_FORWARD, since
according to the logic, it should reada_for_search forward, not
backward.
Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
delayed_iput_count wa supposed to be used to implement, well, delayed
iput. The idea is that we keep accumulating the number of iputs we do
until eventually the inode is deleted. Turns out we never really
switched the delayed_iput_count from 0 to 1, hence all conditional
code relying on the value of that member being different than 0 was
never executed. This, as it turns out, didn't cause any problem due
to the simple fact that the generic inode's i_count member was always
used to count the number of iputs. So let's just remove the unused
member and all unused code. This patch essentially provides no
functional changes. While at it, also add proper documentation for
btrfs_add_delayed_iput
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
The behavior of btrfs_delalloc_reserve_metadata depends on whether
the inode we are allocating for is the freespace inode or not. As it
stands if we are the free node we set 'flush' and 'delalloc_lock'
variable to certain values. Subsequently we check the values of those
vars and act accordingly. Instead, simplify things by having 1 if
which checks whether we are the freespace inode or not and do any
specific operation in either branches of that if. This makes the code
a bit easier to understand, as an added bonus it also shrinks the
compiled size:
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-17 (-17)
Function old new delta
btrfs_delalloc_reserve_metadata 1876 1859 -17
Total: Before=85966, After=85949, chg -0.02%
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Edmund Nadolski <enadolski@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add opened device to the tail of dev_alloc_list instead of head, so that
it maintains the same order as dev_list.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
By maintaining the device list sorted lets us reproduce the problems
related to missing chunk in the degraded mode much more consistent. So
fix this by sorting the devices by devid within the kernel. So that we
know which device is assigned to the struct fs_info::latest_bdev when
all the devices are having and same SB generation.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
It's not necessary to hold ->orphan_lock when checking inode's runtime
flags.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of manually fiddling with the state of the task
(RUNNING->INTERRUPTIBLE->RUNNING) again just use schedule_timeout_interruptible
which adjusts the task state as needed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Even though btrfs_start_dirty_block_groups is fairly in the beginning of
btrfs_commit_transaction outside of the critical section defined by the
transaction states it can only be run by a single comitter. In other
words it defines its own critical section thanks to the
BTRFS_TRANS_DIRTY_BG run flag and ro_block_group_mutex. However, its
error handling is outside of this critical section which is a bit
counter-intuitive. So move the error handling righ after the function is
executed and let the sole runner of dirty block groups handle the return
value. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
bio_add_page() can fail for logical reasons as from the bio_add_page()
comments:
/*
* This will only fail if either bio->bi_vcnt == bio->bi_max_vecs or
* it's a cloned bio.
*/
Here we have just allocated the bio, so both of those failures can't
occur. So drop the check. We can also drop the error stats for write
error.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enospc_debug makes extent allocator print more debug messages,
however for chunk allocation, there is no debug message for enospc_debug
at all.
This patch will add message for the following parts of chunk allocator:
1) No rw device at all
Quite rare, but at least output one message for this case.
2) Not enough space for some device
This debug message is quite handy for unbalanced disks with stripe
based profiles (RAID0/10/5/6).
3) Not enough free devices
This debug message should tell us if current chunk allocator is
working correctly under minimal device requirements.
Although in most cases, we will hit other ENOSPC before we even hit a
chunk allocator ENOSPC, but such debug info won't help.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use ASSERT to report logical error in cow_file_range(), also move it a
bit closer to when the num_bytes is derived.
The extent start could be (u64)-1 in some cases, the assert should catch
that we do not accidentally pass it to cow_file_range.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit [1] removed the need to use btrfs_async_submit_limit(), so
delete it.
[1]
commit 736cd52e0c
Btrfs: remove nr_async_submits and async_submit_draining
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Preempt counter APIs have been split out, currently, hardirq.h just
includes irq_enter/exit APIs which are not used by btrfs at all.
So, remove the unused hardirq.h.
Signed-off-by: Yang Shi <yang.s@alibaba-inc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when enospc_debug mount option is turned on we do not print
any debug info in case metadata reservation failures happen. Fix this
by adding the necessary hook in reserve_metadata_bytes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The reason why io_bgs can be modified without holding any lock is
non-obvious. Document it and reference that documentation from the
respective call sites.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
list_first_entry is essentially a wrapper over cotnainer_of. The latter
can never return null even if it's working on inconsistent list since it
will either crash or return some offset in the wrong struct.
Additionally, for the dirty_bgs list the iteration is done under
dirty_bgs_lock which ensures consistency of the list.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For debugging or administration purposes, we would want to know if and
when the user cancels the replace, to complement the existing messages
when dev-replace starts or finishes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog, fold fix for RCU warning from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
The replace target device can be missing when mounted with -o degraded,
but we wont allocate a missing btrfs_device to it. So check the device
before accessing.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
IP: btrfs_destroy_dev_replace_tgtdev+0x43/0xf0 [btrfs]
Call Trace:
btrfs_dev_replace_cancel+0x15f/0x180 [btrfs]
btrfs_ioctl+0x2216/0x2590 [btrfs]
do_vfs_ioctl+0x625/0x650
SyS_ioctl+0x4e/0x80
do_syscall_64+0x5d/0x160
entry_SYSCALL64_slow_path+0x25/0x25
This patch has been moved in front of patch "btrfs: log, when replace,
is canceled by the user" that could reproduce the crash if the system
reboots inside btrfs_dev_replace_start before the
btrfs_dev_replace_finishing call.
$ mkfs /dev/sda
$ mount /dev/sda mnt
$ btrfs replace start /dev/sda /dev/sdb
<insert reboot>
$ mount po degraded /dev/sdb mnt
<crash>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ added reproducer description from mail ]
Signed-off-by: David Sterba <dsterba@suse.com>
The options alloc_start and subvolrootid are deprecated, comment them in
the tokens list. And leave them as it is. No functional changes.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As the commit mount option is unsigned so manage it as %u for token
verifications, instead of %d.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As check_int_print_mask mount option is unsigned so manage it as %u for
token verifications, instead of %d.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
As metadata_ratio mount option is unsinged so manage it as %u for token
verifications, instead of %d.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The mount option thread_pool is always unsigned. Manage it that way all
around.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_buffer_uptodate() is a trivial wrapper around test_bit() and
nothing else. So make it static and inline, save on code space and call
indirection.
Before:
text data bss dec hex filename
1131257 82898 18992 1233147 12d0fb fs/btrfs/btrfs.ko
After:
text data bss dec hex filename
1131090 82898 18992 1232980 12d054 fs/btrfs/btrfs.ko
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass btrfs_trans_handle which contains a reference to the
fs_info so use that. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass the btrfs_transaction which references fs_info so no
need to pass the later as an argument. Also use the opportunity to
shorten transaction->trans. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass the trans handle which has a reference to fs_info to
create_pending_snapshot so we can refer to it directly. Doing this
obviates the need to pass the fs_info to create_pending_snapshots as
well. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have the fs_info from the passed transaction so use it
directly. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The only thing the passed root is used for is:
1. get a reference to the fs_info and to
2. call trace_btrfs_transaction_commit.
We can achieve 1) by simply referring to the fs_info from passed trans
object. As far as 2) is concerned cleanup_transaction is called from
only one place and the 'root' argument passed is the one from the trans
handle. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass a transaction handle which refrences the fs_info so
we can grab it from there. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass the transaction handle which has a reference to the
fs_info. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass the transaction which has a reference to the fs_info,
so use that. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already pass the transaction handle, which contains a refrence to
the fs_info so grab it from there. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It can be referenced from the passed transaction so no point in passing
it as a function argument. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It can be referenced from the passed transaciton so no point in
passing it as function argument. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All current callers of this function just get a reference to the
trans->fs_info member and pass it as the second argument. Collapse this
into the function itself. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_write_and_wait_transaction is essentially a wrapper of
btrfs_write_and_wait_marked_extents with the addition of calling
clear_btree_io_tree. Having the code split doesn't really bring any
benefit. Open code the later into the former and add proper
documentation header.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformat comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function is only ever used in __btrfs_end_transaction and
btrfs_commit_transaction so there is no need to export it via header.
Let's move it closer to where it's used, make it static and remove it
from the header. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_init_dev_replace_tgtdev_for_resume() initializes replace
target device in a few simple steps, so do it at the parent function.
Moreover, there isn't any other caller so just open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current u64 return from btrfs_dev_replace_cancel() was probably done
to match the btrfs_ioctl_dev_replace_args::result. However as our
actual return value fits in int, and it further gets typecast to u64,
so just return int.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Remove __ which is for the special functions.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_dev_replace_cancel() calls __btrfs_dev_replace_cancel() for the
actual cancel so just open code it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently the function uses a hardcoded value for the checksum size of
a sector. This is fine, given that we currently support only a single
algorithm, whose checksum is 4 bytes == sizeof(u32). Despite not
having other algorithms, btrfs' design supports using a different
algorithm whith different space requirements. To future-proof the code
query the size of the currently used algorithm from the in-memory copy
of the super block. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Su Yue <suy.fnst@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a missing void parameter to function btrfs_test_extent_map, fixes
sparse warning:
warning: non-ANSI function declaration of function 'btrfs_test_extent_map'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The check for a non-zero ret is redundant as the goto will jump to
the very next statement anyway. Remove this extraneous code.
Detected by CoverityScan, CID#1463784 ("Identical code for different
branches")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 0e8c36a9fd ("Btrfs: fix lots of orphan inodes when the space
is not enough") changed the way transaction reservation is made in
btrfs_evict_node and as a result this function became unused. This has
been the status quo for 5 years in which time no one noticed, so I'd
say it's safe to assume it's unlikely it will ever be used again.
Historical note: there were more attempts to remove the function, the
reasoning was missing and only based on some static analysis tool
reports. Other reason for rejection was that there seemed to be
connection to BTRFS_RESERVE_FLUSH_LIMIT and that would need to be
removeed to. This was not correct so removing the function is all we can
do.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
[ add the note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Presently, failing a primary super block write but succeeding in at
least one super block write in general will appear to users as if
nothing important went wrong. However, upon unmounting and re-mounting,
the file system will be in a rolled back state. This was discovered
with a BCC program that uses bpf_override_return() to fail super block
writes.
This patch outputs an error clarifying that the primary super block
write has failed, so users can expect potentially erroneous behaviour.
It also forces wait_dev_supers() to return an error to its caller if
the primary super block write fails.
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This prints out eb->bflags since it contains some useful information,
e.g. whether eb is dirty.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions definitions have either the initial open brace and/or
the closing brace outside of column 1.
Move those braces to column 1.
This allows various function analyzers like gnu complexity to work
properly for these modified functions.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
"mark_unwritten" in comment and "unwritten" in the function arguments
is mismatched.
Signed-off-by: zhenwei.pi <zhenwei.pi@youruncloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Code cleanup. Instead of writing an internal static function, use the
available generic_writepages().
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We can only get into the branch if CRCs are enabled, so there's no
need to check inside the branch for CRCs being enabled....
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We recently came across a V4 filesystem causing memory corruption
due to a newly allocated inode being setup twice and being added to
the superblock inode list twice. From code inspection, the only way
this could happen is if a newly allocated inode was not marked as
free on disk (i.e. di_mode wasn't zero).
Running the metadump on an upstream debug kernel fails during inode
allocation like so:
XFS: Assertion failed: ip->i_d.di_nblocks == 0, file: fs/xfs/xfs_inod=
e.c, line: 838
------------[ cut here ]------------
kernel BUG at fs/xfs/xfs_message.c:114!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 11 PID: 3496 Comm: mkdir Not tainted 4.16.0-rc5-dgc #442
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/0=
1/2014
RIP: 0010:assfail+0x28/0x30
RSP: 0018:ffffc9000236fc80 EFLAGS: 00010202
RAX: 00000000ffffffea RBX: 0000000000004000 RCX: 0000000000000000
RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff8227211b
RBP: ffffc9000236fce8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000bec R11: f000000000000000 R12: ffffc9000236fd30
R13: ffff8805c76bab80 R14: ffff8805c77ac800 R15: ffff88083fb12e10
FS: 00007fac8cbff040(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000=
000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffa6783ff8 CR3: 00000005c6e2b003 CR4: 00000000000606e0
Call Trace:
xfs_ialloc+0x383/0x570
xfs_dir_ialloc+0x6a/0x2a0
xfs_create+0x412/0x670
xfs_generic_create+0x1f7/0x2c0
? capable_wrt_inode_uidgid+0x3f/0x50
vfs_mkdir+0xfb/0x1b0
SyS_mkdir+0xcf/0xf0
do_syscall_64+0x73/0x1a0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
Extracting the inode number we crashed on from an event trace and
looking at it with xfs_db:
xfs_db> inode 184452204
xfs_db> p
core.magic = 0x494e
core.mode = 0100644
core.version = 2
core.format = 2 (extents)
core.nlinkv2 = 1
core.onlink = 0
.....
Confirms that it is not a free inode on disk. xfs_repair
also trips over this inode:
.....
zero length extent (off = 0, fsbno = 0) in ino 184452204
correcting nextents for inode 184452204
bad attribute fork in inode 184452204, would clear attr fork
bad nblocks 1 for inode 184452204, would reset to 0
bad anextents 1 for inode 184452204, would reset to 0
imap claims in-use inode 184452204 is free, would correct imap
would have cleared inode 184452204
.....
disconnected inode 184452204, would move to lost+found
And so we have a situation where the directory structure and the
inobt thinks the inode is free, but the inode on disk thinks it is
still in use. Where this corruption came from is not possible to
diagnose, but we can detect it and prevent the kernel from oopsing
on lookup. The reproducer now results in:
$ sudo mkdir /mnt/scratch/{0,1,2,3,4,5}{0,1,2,3,4,5}
mkdir: cannot create directory =E2=80=98/mnt/scratch/00=E2=80=99: File ex=
ists
mkdir: cannot create directory =E2=80=98/mnt/scratch/01=E2=80=99: File ex=
ists
mkdir: cannot create directory =E2=80=98/mnt/scratch/03=E2=80=99: Structu=
re needs cleaning
mkdir: cannot create directory =E2=80=98/mnt/scratch/04=E2=80=99: Input/o=
utput error
mkdir: cannot create directory =E2=80=98/mnt/scratch/05=E2=80=99: Input/o=
utput error
....
And this corruption shutdown:
[ 54.843517] XFS (loop0): Corruption detected! Free inode 0xafe846c not=
marked free on disk
[ 54.845885] XFS (loop0): Internal error xfs_trans_cancel at line 1023 =
of file fs/xfs/xfs_trans.c. Caller xfs_create+0x425/0x670
[ 54.848994] CPU: 10 PID: 3541 Comm: mkdir Not tainted 4.16.0-rc5-dgc #=
443
[ 54.850753] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO=
S 1.10.2-1 04/01/2014
[ 54.852859] Call Trace:
[ 54.853531] dump_stack+0x85/0xc5
[ 54.854385] xfs_trans_cancel+0x197/0x1c0
[ 54.855421] xfs_create+0x425/0x670
[ 54.856314] xfs_generic_create+0x1f7/0x2c0
[ 54.857390] ? capable_wrt_inode_uidgid+0x3f/0x50
[ 54.858586] vfs_mkdir+0xfb/0x1b0
[ 54.859458] SyS_mkdir+0xcf/0xf0
[ 54.860254] do_syscall_64+0x73/0x1a0
[ 54.861193] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 54.862492] RIP: 0033:0x7fb73bddf547
[ 54.863358] RSP: 002b:00007ffdaa553338 EFLAGS: 00000246 ORIG_RAX: 0000=
000000000053
[ 54.865133] RAX: ffffffffffffffda RBX: 00007ffdaa55449a RCX: 00007fb73=
bddf547
[ 54.866766] RDX: 0000000000000001 RSI: 00000000000001ff RDI: 00007ffda=
a55449a
[ 54.868432] RBP: 00007ffdaa55449a R08: 00000000000001ff R09: 00005623a=
8670dd0
[ 54.870110] R10: 00007fb73be72d5b R11: 0000000000000246 R12: 000000000=
00001ff
[ 54.871752] R13: 00007ffdaa5534b0 R14: 0000000000000000 R15: 00007ffda=
a553500
[ 54.873429] XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1=
024 of file fs/xfs/xfs_trans.c. Return address = ffffffff814cd050
[ 54.882790] XFS (loop0): Corruption of in-memory data detected. Shutt=
ing down filesystem
[ 54.884597] XFS (loop0): Please umount the filesystem and rectify the =
problem(s)
Note that this crash is only possible on v4 filesystemsi or v5
filesystems mounted with the ikeep mount option. For all other V5
filesystems, this problem cannot occur because we don't read inodes
we are allocating from disk - we simply overwrite them with the new
inode information.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In xfs_scrub_iallocbt_xref_rmap_inodes we're checking inodes against
rmap records, so we should use xfs_scrub_btree_xref_set_corrupt if we
encounter discrepancies here so that we know that it's a cross
referencing error, not necessarily a corruption in the inobt itself.
The userspace xfs_scrub program will try to repair outright corruptions
in the agi/inobt prior to phase 3 so that the inode scan will proceed.
If only a cross-referencing error is noted, the repair program defers
the repair attempt until it can check the other space metadata at least
once.
It is therefore essential that the inobt scrubber can correctly
distinguish between corruptions and "unable to cross-reference something
else with this inobt". The same reasoning applies to "xfs: record inode
buf errors as a xref error in inobt scrubber".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
If a directory's parent inode pointer doesn't point to an inode, the
directory should be flagged as corrupt. Enable IGET_UNTRUSTED here so
that _iget will return -EINVAL if the inobt does not confirm that the
inode is present and allocated and we can flag the directory corruption.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're verifying inode buffers, sanity-check the unlinked pointer.
We don't want to run the risk of trying to purge something that's
obviously broken.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Extent size hint validation is used by scrub to decide if there's an
error, and it will be used by repair to decide to remove the hint.
Since these use the same validation functions, move them to libxfs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
During the inode btree scrubs we try to confirm the freemask bits
against the inode records. If the inode buffer read fails, this is a
cross-referencing error, not a corruption of the inode btree itself.
Use the xref_process_error call here. Found via core.version middlebit
fuzz in xfs/415.
The userspace xfs_scrub program will try to repair outright corruptions
in the agi/inobt prior to phase 3 so that the inode scan will proceed.
If only a cross-referencing error is noted, the repair program defers
the repair attempt until it can check the other space metadata at least
once.
It is therefore essential that the inobt scrubber can correctly
distinguish between corruptions and "unable to cross-reference something
else with this inobt".
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we no longer do raw inode buffer scrubbing, the bp parameter is
no longer used anywhere we're dealing with an inode, so remove it and
all the useless NULL parameters that go with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The inode scrubber tries to _iget the inode prior to running checks.
If that _iget call fails with corruption errors that's an automatic
fail, regardless of whether it was the inode buffer read verifier,
the ifork verifier, or the ifork formatter that errored out.
Therefore, get rid of the raw mode scrub code because it's not needed.
Found by trying to fix some test failures in xfs/379 and xfs/415.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When we're scanning an extent mapping inode fork, ensure that every rmap
record for this ifork has a corresponding bmbt record too. This
(mostly) provides the ability to cross-reference rmap records with bmap
data. The rmap scrubber cannot do the xref on its own because that
requires taking an ilock with the agf lock held, which violates our
locking order rules (inode, then agf).
Note that we only do this for forks that are in btree format due to the
increased complexity; or forks that should have data but suspiciously
have zero extents because the inode could have just had its iforks
zapped by the inode repair code and now we need to reclaim the old
extents.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When the inode buffer verifier encounters an error, it's much more
helpful to print a buffer from the offending inode instead of just the
start of the inode chunk buffer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor some of the inode verifier failure logging call sites to use
the new xfs_inode_verifier_error method which dumps the offending buffer
as well as the code location of the failed check. This trims the
output, makes it clearer to the admin that repair must be run, and gives
the developers more details to work from.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the bmap validator into a more complete helper that looks for
extents that run off the end of the device, overflow into the next AG,
or have invalid flag states.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In xfs_dir2_data_use_free, we examine on-disk metadata and ASSERT if
it doesn't make sense. Since a carefully crafted fuzzed image can cause
the kernel to crash after blowing a bunch of assertions, let's move
those checks into a validator function and rig everything up to return
EFSCORRUPTED to userspace. Found by lastbit fuzzing ltail.bestcount via
xfs/391.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The struct xfs_agfl v5 header was originally introduced with
unexpected padding that caused the AGFL to operate with one less
slot than intended. The header has since been packed, but the fix
left an incompatibility for users who upgrade from an old kernel
with the unpacked header to a newer kernel with the packed header
while the AGFL happens to wrap around the end. The newer kernel
recognizes one extra slot at the physical end of the AGFL that the
previous kernel did not. The new kernel will eventually attempt to
allocate a block from that slot, which contains invalid data, and
cause a crash.
This condition can be detected by comparing the active range of the
AGFL to the count. While this detects a padding mismatch, it can
also trigger false positives for unrelated flcount corruption. Since
we cannot distinguish a size mismatch due to padding from unrelated
corruption, we can't trust the AGFL enough to simply repopulate the
empty slot.
Instead, avoid unnecessarily complex detection logic and and use a
solution that can handle any form of flcount corruption that slips
through read verifiers: distrust the entire AGFL and reset it to an
empty state. Any valid blocks within the AGFL are intentionally
leaked. This requires xfs_repair to rectify (which was already
necessary based on the state the AGFL was found in). The reset
mitigates the side effect of the padding mismatch problem from a
filesystem crash to a free space accounting inconsistency. The
generic approach also means that this patch can be safely backported
to kernels with or without a packed struct xfs_agfl.
Check the AGF for an invalid freelist count on initial read from
disk. If detected, set a flag on the xfs_perag to indicate that a
reset is required before the AGFL can be used. In the first
transaction that attempts to use a flagged AGFL, reset it to empty,
warn the user about the inconsistency and allow the freelist fixup
code to repopulate the AGFL with new blocks. The xfs_perag flag is
cleared to eliminate the need for repeated checks on each block
allocation operation.
This allows kernels that include the packing fix commit 96f859d52b
("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct")
to handle older unpacked AGFL formats without a filesystem crash.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead split out a __xfs_log_fore_lsn helper that gets called again
with the already_slept flag set to true in case we had to sleep.
This prepares for aio_fsync support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the the smallest possible loop as preable to find the correct iclog
buffer, and then use gotos for unwinding to straighten the code.
Also fix the top of function comment while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When punching a hole or truncating an inode down to a given size, also
check if the truncate point / start of the hole is within the range we
have metadata for. Otherwise, we can end up freeing blocks that
shouldn't be freed, corrupting the inode, or crashing the machine when
trying to punch a hole into the void.
When growing an inode via truncate, we set the new size but we don't
allocate additional levels of indirect blocks and grow the inode height.
When shrinking that inode again, the new size may still point beyond the
end of the inode's metadata.
Fixes xfstest generic/476.
Debugged-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, thp: do not cause memcg oom for thp
mm/vmscan: wake up flushers for legacy cgroups too
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
mm/thp: do not wait for lock_page() in deferred_split_scan()
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
x86/mm: implement free pmd/pte page interfaces
mm/vmalloc: add interfaces to free unmapped page table
h8300: remove extraneous __BIG_ENDIAN definition
hugetlbfs: check for pgoff value overflow
lockdep: fix fs_reclaim warning
MAINTAINERS: update Mark Fasheh's e-mail
mm/mempolicy.c: avoid use uninitialized preferred_node
A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call. The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.
A sequence such as:
mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);
will result in the following when task exits/file closed,
kernel BUG at mm/hugetlb.c:749!
Call Trace:
hugetlbfs_evict_inode+0x2f/0x40
evict+0xcb/0x190
__dentry_kill+0xcb/0x150
__fput+0x164/0x1e0
task_work_run+0x84/0xa0
exit_to_usermode_loop+0x7d/0x80
do_syscall_64+0x18b/0x190
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.
The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.
[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
1) Always validate XFRM esn replay attribute, from Florian Westphal.
2) Fix RCU read lock imbalance in xfrm_get_tos(), from Xin Long.
3) Don't try to get firmware dump if not loaded in iwlwifi, from Shaul
Triebitz.
4) Fix BPF helpers to deal with SCTP GSO SKBs properly, from Daniel
Axtens.
5) Fix some interrupt handling issues in e1000e driver, from Benjamin
Poitier.
6) Use strlcpy() in several ethtool get_strings methods, from Florian
Fainelli.
7) Fix rhlist dup insertion, from Paul Blakey.
8) Fix SKB leak in netem packet scheduler, from Alexey Kodanev.
9) Fix driver unload crash when link is up in smsc911x, from Jeremy
Linton.
10) Purge out invalid socket types in l2tp_tunnel_create(), from Eric
Dumazet.
11) Need to purge the write queue when TCP connections are aborted,
otherwise userspace using MSG_ZEROCOPY can't close the fd. From
Soheil Hassas Yeganeh.
12) Fix double free in error path of team driver, from Arkadi
Sharshevsky.
13) Filter fixes for hv_netvsc driver, from Stephen Hemminger.
14) Fix non-linear packet access in ipv6 ndisc code, from Lorenzo
Bianconi.
15) Properly filter out unsupported feature flags in macvlan driver,
from Shannon Nelson.
16) Don't request loading the diag module for a protocol if the protocol
itself is not even registered. From Xin Long.
17) If datagram connect fails in ipv6, make sure the socket state is
consistent afterwards. From Paolo Abeni.
18) Use after free in qed driver, from Dan Carpenter.
19) If received ipv4 PMTU is less than the min pmtu, lock the mtu in the
entry. From Sabrina Dubroca.
20) Fix sleep in atomic in tg3 driver, from Jonathan Toppins.
21) Fix vlan in vlan untagging in some situations, from Toshiaki Makita.
22) Fix double SKB free in genlmsg_mcast(). From Nicolas Dichtel.
23) Fix NULL derefs in error paths of tcf_*_init(), from Davide Caratti.
24) Unbalanced PM runtime calls in FEC driver, from Florian Fainelli.
25) Memory leak in gemini driver, from Igor Pylypiv.
26) IDR leaks in error paths of tcf_*_init() functions, from Davide
Caratti.
27) Need to use GFP_ATOMIC in seg6_build_state(), from David Lebrun.
28) Missing dev_put() in error path of macsec_newlink(), from Dan
Carpenter.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (201 commits)
macsec: missing dev_put() on error in macsec_newlink()
net: dsa: Fix functional dsa-loop dependency on FIXED_PHY
hv_netvsc: common detach logic
hv_netvsc: change GPAD teardown order on older versions
hv_netvsc: use RCU to fix concurrent rx and queue changes
hv_netvsc: disable NAPI before channel close
net/ipv6: Handle onlink flag with multipath routes
ppp: avoid loop in xmit recursion detection code
ipv6: sr: fix NULL pointer dereference when setting encap source address
ipv6: sr: fix scheduling in RCU when creating seg6 lwtunnel state
net: aquantia: driver version bump
net: aquantia: Implement pci shutdown callback
net: aquantia: Allow live mac address changes
net: aquantia: Add tx clean budget and valid budget handling logic
net: aquantia: Change inefficient wait loop on fw data reads
net: aquantia: Fix a regression with reset on old firmware
net: aquantia: Fix hardware reset when SPI may rarely hangup
s390/qeth: on channel error, reject further cmd requests
s390/qeth: lock read device while queueing next buffer
s390/qeth: when thread completes, wake up all waiters
...
If mount is auto-probing for filesystem type, it will try various
filesystems in order, with the MS_SILENT flag set. We get
that flag as the silent arg to ext4_fill_super.
If we're probing (silent==1) then don't complain about feature
incompatibilities that are found if it looks like it's actually
a different valid extN type - failed probes should be silent
in this case.
If the on-disk features are unknown even to ext4, then complain.
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Tested-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Commit 16c5468859 ("ext4: Allow parallel DIO reads") reworked the way
locking happens around parallel dio reads. This resulted in obviating
the need for EXT4_STATE_DIOREAD_LOCK flag and accompanying logic.
Currently this amounts to dead code so let's remove it. No functional
changes
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
ext4_iomap_begin() has a bug where offset returned in the iomap
structure will be truncated to unsigned long size. On 64-bit
architectures this is fine but on 32-bit architectures obviously not.
Not many places actually use the offset stored in the iomap structure
but one of visible failures is in SEEK_HOLE / SEEK_DATA implementation.
If we create a file like:
dd if=/dev/urandom of=file bs=1k seek=8m count=1
then
lseek64("file", 0x100000000ULL, SEEK_DATA)
wrongly returns 0x100000000 on unfixed kernel while it should return
0x200000000. Avoid the overflow by proper type cast.
Fixes: 545052e9e3 ("ext4: Switch to iomap for SEEK_HOLE / SEEK_DATA")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org # v4.15
Currently in ext4 direct write path, we update i_disksize only when
new eof is greater than i_size, and don't update it even when new
eof is greater than i_disksize but less than i_size. This doesn't
work well with delalloc buffer write, which updates i_size and
i_disksize only when delalloc blocks are resolved (at writeback
time), the i_disksize from direct write can be lost if a previous
buffer write succeeded at write time but failed at writeback time,
then results in corrupted ondisk inode size.
Consider this case, first buffer write 4k data to a new file at
offset 16k with delayed allocation, then direct write 4k data to the
same file at offset 4k before delalloc blocks are resolved, which
doesn't update i_disksize because it writes within i_size(20k), but
the extent tree metadata has been committed in journal. Then
writeback of the delalloc blocks fails (due to device error etc.),
and i_size/i_disksize from buffer write can't be written to disk
(still zero). A subsequent umount/mount cycle recovers journal and
writes extent tree metadata from direct write to disk, but with
i_disksize being zero.
Fix it by updating i_disksize too in direct write path when new eof
is greater than i_disksize but less than i_size, so i_disksize is
always consistent with direct write.
This fixes occasional i_size corruption in fstests generic/475.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
i_disksize update should be protected by i_data_sem, by either taking
the lock explicitly or by using ext4_update_i_disksize() helper. But the
i_disksize updates in ext4_direct_IO_write() are not protected at all,
which may be racing with i_disksize updates in writeback path in
delalloc buffer write path.
This is found by code inspection, and I didn't hit any i_disksize
corruption due to this bug. Thanks to Jan Kara for catching this bug and
suggesting the fix!
Reported-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----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=oGAf
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"Just one fix for an occasional panic from Jeff Layton"
* tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux:
nfsd: remove blocked locks on client teardown
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The old wait_on_atomic_t() is going to get removed, use the more
flexible wait_var_event() API instead.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sysfs_create_link_nowarn() is going to be used in phylib framework in
subsequent patch which can be built as module. Hence, export
sysfs_create_link_nowarn() to avoid build errors.
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Fixes: a399546049 ("net: phy: Relax error checking on sysfs_create_link()")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had some reports of panics in nfsd4_lm_notify, and that showed a
nfs4_lockowner that had outlived its so_client.
Ensure that we walk any leftover lockowners after tearing down all of
the stateids, and remove any blocked locks that they hold.
With this change, we also don't need to walk the nbl_lru on nfsd_net
shutdown, as that will happen naturally when we tear down the clients.
Fixes: 76d348fadf (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks)
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
-----BEGIN PGP SIGNATURE-----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=bXFe
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"There's an important revert in this pull request that needs to go to
stable as it causes a corruption on big endian machines.
The other fix is for FIEMAP incorrectly reporting shared extents
before a sync and one fix for a crash in raid56.
So far we got only one report about the BE corruption, the stable
kernels were out for like a week, so hopefully the scope of the damage
is low"
* tag 'for-4.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: use proper endianness accessors for super_copy"
btrfs: add missing initialization in btrfs_check_shared
btrfs: Fix NULL pointer exception in find_bio_stripe
This reverts commit 3c181c12c4.
The offending patch was merged in 4.16-rc4 and was promptly applied to
stable kernels 4.14.25 and 4.15.8.
The patch causes a corruption in several superblock items on big-endian
machines because of messed up endianity conversions. The damage is
manually repairable. A filesystem cannot be mounted again after it has
been unmounted once.
We do a full revert and not a fixup so stable can pick that patch ASAP.
Fixes: 3c181c12c4 ("btrfs: use proper endianness accessors for super_copy")
Link: https://lkml.kernel.org/r/1521139304@msgid.manchmal.in-ulm.de
CC: stable@vger.kernel.org # 4.14+
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Hardwall is a tile specific feature, and with the removal of the
tile architecture, this has become dead code, so let's remove it.
Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull vfs fixes from Al Viro:
- backport-friendly part of lock_parent() race fix
- a fix for an assumption in the heurisic used by path_connected() that
is not true on NFS
- livelock fixes for d_alloc_parallel()
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Teach path_connected to handle nfs filesystems with multiple roots.
fs: dcache: Use READ_ONCE when accessing i_dir_seq
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem. The subsets can be from
disjoint directory trees. The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.
The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem. The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.
This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.
When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.
The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount. This move can happen either locally or
remotely. With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.
If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check. As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.
The is_subdir function might be cheap enough that we can call it
unconditionally. Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to. So I am avoiding that for now.
Filesystems with snapshots such as nilfs and btrfs do something
similar. But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc2 ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use xfs_iext_prev_extent to skip to the previous extent instead of
opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the control flow a bit in preparation for O_ATOMIC-related
changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This helper doesn't add any real value over just calling iomap_zero_range
directly, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that we convert COW preallocations from unwritten to real on every
call this function needs to be called with the ilock held exclusively.
Fortunately we already do that, but update the assert to match.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no reason to get a mapping bigger than what we were asked for.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
i_cnextents does not include delayed allocated extents, so switch
to the inode fork size check that we already use in other places
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
register_blkdev() and __register_chrdev_region() treat the major
number as an unsigned int. So print it the same way to avoid
absurd error statements such as:
"... major requested (-1) is greater than the maximum (511) ..."
(and also fix off-by-one bugs in the error prints).
While at it, also update the comment describing register_blkdev().
Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CHRDEV_MAJOR_DYN_END and CHRDEV_MAJOR_DYN_EXT_END are valid major
numbers. So fix the loop iteration to include them in the search for
free major numbers.
While at it, also remove a redundant if condition ("cd->major != i"),
as it will never be true.
Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the gfs2_iomap_end tracepoint, log the physical block address, just
as in the gfs2_bmap tracepoint.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This patch addresses an issue that causes fiemap to falsely
report a shared extent. The test case is as follows:
xfs_io -f -d -c "pwrite -b 16k 0 64k" -c "fiemap -v" /media/scratch/file5
sync
xfs_io -c "fiemap -v" /media/scratch/file5
which gives the resulting output:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (121.359 MiB/sec and 7766.9903 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x2001
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
This is because btrfs_check_shared calls find_parent_nodes
repeatedly in a loop, passing a share_check struct to report
the count of shared extent. But btrfs_check_shared does not
re-initialize the count value to zero for subsequent calls
from the loop, resulting in a false share count value. This
is a regressive behavior from 4.13.
With proper re-initialization the test result is as follows:
wrote 65536/65536 bytes at offset 0
64 KiB, 4 ops; 0.0000 sec (110.035 MiB/sec and 7042.2535 ops/sec)
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
/media/scratch/file5:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..127]: 24576..24703 128 0x1
which corrects the regression.
Fixes: 3ec4d3238a ("btrfs: allow backref search checks for shared extents")
Signed-off-by: Edmund Nadolski <enadolski@suse.com>
[ add text from cover letter to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
While converting ioctx index from a list to a table, db446a08c2
("aio: convert the ioctx list to table lookup v3") missed tagging
kioctx_table->table[] as an array of RCU pointers and using the
appropriate RCU accessors. This introduces a small window in the
lookup path where init and access may race.
Mark kioctx_table->table[] with __rcu and use the approriate RCU
accessors when using the field.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: db446a08c2 ("aio: convert the ioctx list to table lookup v3")
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.12+
While fixing refcounting, e34ecee2ae ("aio: Fix a trinity splat")
incorrectly removed explicit RCU grace period before freeing kioctx.
The intention seems to be depending on the internal RCU grace periods
of percpu_ref; however, percpu_ref uses a different flavor of RCU,
sched-RCU. This can lead to kioctx being freed while RCU read
protected dereferences are still in progress.
Fix it by updating free_ioctx() to go through call_rcu() explicitly.
v2: Comment added to explain double bouncing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Fixes: e34ecee2ae ("aio: Fix a trinity splat")
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org # v3.13+
Streamline the conditionals so that it is more obvious which specific case
form the top of the function comments is being handled. Use gotos only
for early returns.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to a single interface for flushing the log to a specific LSN, which
gives consistent trace point coverage and a less confusing interface.
The was only a single user of the previous xfs_log_force_lsn function,
which now also passes a NULL log_flushed argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Switch to a single interface for flushing the whole log, which gives
consistent trace point coverage, and removes the unused log_flushed
argument for the previous _xfs_log_force callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The function now does something, and that something is central to our
inode logging scheme.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Most libcs will still look at /dev/ptmx when opening the master fd of a pty
device. When /dev/ptmx is a bind-mount of /dev/pts/ptmx and the TIOCGPTPEER
ioctl() is used to safely retrieve a file descriptor for the slave side of
the pty based on the master fd, the /proc/self/fd/{0,1,2} symlinks will
point to /. A very simply reproducer for this issue presupposing a libc
that uses TIOCGPTPEER in its openpty() implementation is:
unshare --mount
mount --bind /dev/pts/ptmx /dev/ptmx
chmod 666 /dev/ptmx
script
ls -al /proc/self/fd/0
Having bind-mounts of /dev/pts/ptmx to /dev/ptmx not working correctly is a
regression. In addition, it is also a fairly common scenario in containers
employing user namespaces.
The reason for the current failure is that the kernel tries to verify the
useability of the devpts filesystem without resolving the /dev/ptmx
bind-mount first. This will lead it to detect that the dentry is escaping
its bind-mount. The reason is that while the devpts filesystem mounted at
/dev/pts has the devtmpfs mounted at /dev as its parent mount:
21 -- -- / /dev
-- 21 -- / /dev/pts
devtmpfs and devpts are on different devices
-- -- 0:6 / /dev
-- -- 0:20 / /dev/pts
This has the consequence that the pathname of the parent directory of the
devpts filesystem mount at /dev/pts is /. So if /dev/ptmx is a bind-mount
of /dev/pts/ptmx then the /dev/ptmx bind-mount and the devpts mount at
/dev/pts will end up being located on the same device which is recorded in
the superblock of their vfsmount. This means the parent directory of the
/dev/ptmx bind-mount will be /ptmx:
-- -- ---- /ptmx /dev/ptmx
Without the bind-mount resolution patch the kernel will now perform the
bind-mount escape check directly on /dev/ptmx. The function responsible for
this is devpts_ptmx_path() which calls pts_path() which in turn calls
path_parent_directory(). Based on the above explanation,
path_parent_directory() will yield / as the parent directory for the
/dev/ptmx bind-mount and not the expected /dev. Thus, the kernel detects
that /dev/ptmx is escaping its bind-mount and will set /proc/<pid>/fd/<nr>
to /.
This patch changes the logic to first resolve any bind-mounts. After the
bind-mounts have been resolved (i.e. we have traced it back to the
associated devpts mount) devpts_ptmx_path() can be called. In order to
guarantee correct path generation for the slave file descriptor the kernel
now requires that a pts directory is found in the parent directory of the
ptmx bind-mount. This implies that when doing bind-mounts the ptmx
bind-mount and the devpts mount should have a common parent directory. A
valid example is:
mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /dev/ptmx
an invalid example is:
mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /ptmx
This allows us to support:
- calling open on ptmx devices located inside non-standard devpts mounts:
mount -t devpts devpts /mnt
master = open("/mnt/ptmx", ...);
slave = ioctl(master, TIOCGPTPEER, ...);
- calling open on ptmx devices located outside the devpts mount with a
common ancestor directory:
mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /dev/ptmx
master = open("/dev/ptmx", ...);
slave = ioctl(master, TIOCGPTPEER, ...);
while failing on ptmx devices located outside the devpts mount without a
common ancestor directory:
mount -t devpts devpts /dev/pts
mount --bind /dev/pts/ptmx /ptmx
master = open("/ptmx", ...);
slave = ioctl(master, TIOCGPTPEER, ...);
in which case save path generation cannot be guaranteed.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Suggested-by: Eric Biederman <ebiederm@xmission.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Sterba
Liu Bo
Howard McLauchlan
Nikolay Borisov
Qu Wenruo
Anand Jain
Matthew Wilcox
Theodore Ts'o
Yan, Zheng
Tyson Nottingham
Al Viro
John Ogness
Eric Biggers
Abhi Das
Eric Sandeen
Andreas Gruenbacher
Greg Kroah-Hartman
David Howells
Kirill Tkhai
Masanari Iida
Brian Foster
Arnd Bergmann
Su Yue
Filipe Manana
Gu JinXiang
Yang Shi
Colin Ian King
Joe Perches
zhenwei.pi
Goldwyn Rodrigues
Dave Chinner
Darrick J. Wong
Christoph Hellwig
David S. Miller
Linus Torvalds
Mike Kravetz
Eric Sandeen
Jiri Slaby
Eryu Guan
Peter Zijlstra
Grygorii Strashko
Jeff Layton
Tejun Heo
Eric W. Biederman
Srivatsa S. Bhat
Edmund Nadolski
Dmitriy Gorokh
Christian Brauner