When handling a data abort from EL0, we currently zero the top byte of
the faulting address, as we assume the address is a TTBR0 address, which
may contain a non-zero address tag. However, the address may be a TTBR1
address, in which case we should not zero the top byte. This patch fixes
that. The effect is that the full TTBR1 address is passed to the task's
signal handler (or printed out in the kernel log).
When handling a data abort from EL1, we leave the faulting address
intact, as we assume it's either a TTBR1 address or a TTBR0 address with
tag 0x00. This is true as far as I'm aware, we don't seem to access a
tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to
forget about address tags, and code added in the future may not always
remember to remove tags from addresses before accessing them. So add tag
handling to the EL1 data abort handler as well. This also makes it
consistent with the EL0 data abort handler.
Fixes: d50240a5f6 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we take a watchpoint exception, the address that triggered the
watchpoint is found in FAR_EL1. We compare it to the address of each
configured watchpoint to see which one was hit.
The configured watchpoint addresses are untagged, while the address in
FAR_EL1 will have an address tag if the data access was done using a
tagged address. The tag needs to be removed to compare the address to
the watchpoints.
Currently we don't remove it, and as a result can report the wrong
watchpoint as being hit (specifically, always either the highest TTBR0
watchpoint or lowest TTBR1 watchpoint). This patch removes the tag.
Fixes: d50240a5f6 ("arm64: mm: permit use of tagged pointers at EL0")
Cc: <stable@vger.kernel.org> # 3.12.x-
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we emulate userspace cache maintenance in the kernel, we can
currently send the task a SIGSEGV even though the maintenance was done
on a valid address. This happens if the address has a non-zero address
tag, and happens to not be mapped in.
When we get the address from a user register, we don't currently remove
the address tag before performing cache maintenance on it. If the
maintenance faults, we end up in either __do_page_fault, where find_vma
can't find the VMA if the address has a tag, or in do_translation_fault,
where the tagged address will appear to be above TASK_SIZE. In both
cases, the address is not mapped in, and the task is sent a SIGSEGV.
This patch removes the tag from the address before using it. With this
patch, the fault is handled correctly, the address gets mapped in, and
the cache maintenance succeeds.
As a second bug, if cache maintenance (correctly) fails on an invalid
tagged address, the address gets passed into arm64_notify_segfault,
where find_vma fails to find the VMA due to the tag, and the wrong
si_code may be sent as part of the siginfo_t of the segfault. With this
patch, the correct si_code is sent.
Fixes: 7dd01aef05 ("arm64: trap userspace "dc cvau" cache operation on errata-affected core")
Cc: <stable@vger.kernel.org> # 4.8.x-
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window. A number of these are
MAINTAINER updates, it seems.
Highlights:
* Maintainers:
- Remove Alexandre Courbot and Stephen Warren from Tegra maintainership,
add Jon Hunter
- Remove Stephen Warren and add Stefan Wahren to bcm2835
- Tweaks for file flagging for Marvell Dove
* Fixes:
- For two non-common-clk platform, handle clk_disable with NULL arg
- Remove redundant Kconfig select for Oxnas
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Wg3V
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull misc ARM SoC fixes from Olof Johansson:
"ARM SoC non-urgent fixes for merge window
Smaller patches that didn't seem to find a home in other branches, and
low-priority fixes from late in the merge window. A number of these
are MAINTAINER updates, it seems.
Highlights:
* Maintainers:
- Remove Alexandre Courbot and Stephen Warren from Tegra
maintainership, add Jon Hunter
- Remove Stephen Warren and add Stefan Wahren to bcm2835
- Tweaks for file flagging for Marvell Dove
* Fixes:
- For two non-common-clk platform, handle clk_disable with NULL arg
- Remove redundant Kconfig select for Oxnas"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mmp: let clk_disable() return immediately if clk is NULL
ARM: w90x900: let clk_disable() return immediately if clk is NULL
MAINTAINERS: Add file patterns for dove device tree bindings
ARM: oxnas: remove redundant select CPU_V6K
MAINTAINERS: tegra: Remove self as maintainer
MAINTAINERS: tegra: Replace Stephen with Jon
MAINTAINERS: Add Stefan Wahren to bcm2835.
MAINTAINERS: remove swarren from bcm2835
MAINTAINERS: Add Jon Mason to BCM5301X maintainers
Pull misc vfs updates from Al Viro:
"Assorted bits and pieces from various people. No common topic in this
pile, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/affs: add rename exchange
fs/affs: add rename2 to prepare multiple methods
Make stat/lstat/fstatat pass AT_NO_AUTOMOUNT to vfs_statx()
fs: don't set *REFERENCED on single use objects
fs: compat: Remove warning from COMPATIBLE_IOCTL
remove pointless extern of atime_need_update_rcu()
fs: completely ignore unknown open flags
fs: add a VALID_OPEN_FLAGS
fs: remove _submit_bh()
fs: constify tree_descr arrays passed to simple_fill_super()
fs: drop duplicate header percpu-rwsem.h
fs/affs: bugfix: Write files greater than page size on OFS
fs/affs: bugfix: enable writes on OFS disks
fs/affs: remove node generation check
fs/affs: import amigaffs.h
fs/affs: bugfix: make symbolic links work again
There is no point to ask how many device-dax instances the kernel should
support. Since we are already using a dynamic major number, just allow
the max number of minors by default and be done. This also fixes the
fact that the proposed max for the NR_DEV_DAX range was larger than what
could be supported by alloc_chrdev_region().
Fixes: ba09c01d2f ("dax: convert to the cdev api")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull vfs fix from Al Viro:
"Braino fix for iov_iter_revert() misuse"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix braino in generic_file_read_iter()
We fixed the bugs in it, but it's still an ugly interface, so let's see
if anybody actually depends on it. It's entirely possible that nothing
actually requires the whole "punch through read-only mappings"
semantics.
For example, gdb definitely uses the /proc/<pid>/mem interface, but it
looks like it mainly does it for regular reads of the target (that don't
need FOLL_FORCE), and looking at the gdb source code seems to fall back
on the traditional ptrace(PTRACE_POKEDATA) interface if it needs to.
If this breaks something, I do have a (more complex) version that only
enables FOLL_FORCE when somebody has PTRACE_ATTACH'ed to the target,
like the comment here used to say ("Maybe we should limit FOLL_FORCE to
actual ptrace users?").
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yuval Mintz says:
====================
qed*: General fixes
This series contain several fixes for qed and qede.
- #1 [and ~#5] relate to XDP cleanups
- #2 and #5 correct VF behavior
- #3 and #4 fix and add missing configurations needed for RoCE & storage
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PFs and VFs share the same structure of NDOs today,
and the VFs explicitly fails the ndo_xdp() callback stating
it doesn't support XDP.
This results in lots of:
[qede_xdp:1032(enp131s2)]VFs don't support XDP
------------[ cut here ]------------
WARNING: CPU: 4 PID: 1426 at net/core/rtnetlink.c:1637 rtnl_dump_ifinfo+0x354/0x3c0
...
Call Trace:
? __alloc_skb+0x9b/0x1d0
netlink_dump+0x122/0x290
netlink_recvmsg+0x27d/0x430
sock_recvmsg+0x3d/0x50
...
As every dump request for the VF interface info would fail due to
rtnl_xdp_fill() returning an error code.
To resolve this, introduce a subset of the NDOs meant for the VF
in a seperate structure and register that one instead for VFs,
and omit the ndo_xdp initialization.
Fixes: 40b8c45492 ("qede: Prevent VFs from using XDP")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configuring the doorbell DPI address, driver aligns the start
address to 4KB [HW-pages] instead of host PAGE_SIZE.
As a result, RoCE applications might receive addresses which are
unaligned to pages [when PAGE_SIZE > 4KB], which is a security risk.
Fixes: 51ff17251c ("qed: Add support for RoCE hw init")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver doesn't pass the number of tasks to the QM init logic
which would cause back-pressure in scenarios requiring many tasks
[E.g., using max MRs] and thus reduced performance.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After previos changes in HW-stop scheme, VFs stopped sending CLOSE
messages to their PFs when they unload.
Fixes: 1226337ad9 ("qed: Correct HW stop flow")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When (re|un)loading, Tx-queues belonging to XDP would not get freed.
Fixes: cb6aeb0792 ("qede: Add support for XDP_TX")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan says:
====================
mlx4 misc fixes
This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.
Series generated against net commit:
32f1bc0f3d Revert "ipv4: restore rt->fi for reference counting"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Under SRIOV resource management, extra counters are allocated to VFs
from a free pool. If that pool is empty, the ALLOC_RES command for
a counter resource fails -- and this generates a misleading error
message in the message log.
Under SRIOV, each VF is allocated (i.e., guaranteed) 2 counters --
one counter per port. For ETH ports, the RoCE driver requests an
additional counter (above the guaranteed counters). If that request
fails, the VF RoCE driver simply uses the default (i.e., guaranteed)
counter for that port.
Thus, failing to allocate an additional counter does not constitute
a problem, and the error message on the PF when this occurs should
be reduced to debug level.
Finally, to identify the situation that the reason for the failure is
that no resources are available to grant to the VF, we modified the
error returned by mlx4_grant_resource to -EDQUOT (Quota exceeded),
which more accurately describes the error.
Fixes: c3abb51bdb ("IB/mlx4: Add RoCE/IB dedicated counters")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inserting steering rules with illegal ring is an invalid operation,
block it.
Fixes: 820672812f ('net/mlx4_en: Manage flow steering rules with ethtool')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The error print within mlx4_en_calc_rx_buf() should be a debug print.
Fixes: 51151a16a6 ('mlx4: allow order-0 memory allocations in RX path')
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Halil is doing a lot more work in the virtio area on s390 than I
do. Let's reflect the reality in the maintainers file.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
trivial fix to spelling mistake in an error message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
We are printing a decimal value for truesize so we shouldn't use an "0x"
prefix.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A known weakness in ptr_ring design is that it does not handle well the
situation when ring is almost full: as entries are consumed they are
immediately used again by the producer, so consumer and producer are
writing to a shared cache line.
To fix this, add batching to consume calls: as entries are
consumed do not write NULL into the ring until we get
a multiple (in current implementation 2x) of cache lines
away from the producer. At that point, write them all out.
We do the write out in the reverse order to keep
producer from sharing cache with consumer for as long
as possible.
Writeout also triggers when ring wraps around - there's
no special reason to do this but it helps keep the code
a bit simpler.
What should we do if getting away from producer by 2 cache lines
would mean we are keeping the ring moe than half empty?
Maybe we should reduce the batching in this case,
current patch simply reduces the batching.
Notes:
- it is no longer true that a call to consume guarantees
that the following call to produce will succeed.
No users seem to assume that.
- batching can also in theory reduce the signalling rate:
users that would previously send interrups to the producer
to wake it up after consuming each entry would now only
need to do this once in a batch.
Doing this would be easy by returning a flag to the caller.
No users seem to do signalling on consume yet so this was not
implemented yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add comments for the virtio_driver members that were not documented.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We already do a reset once in remove_vq_common -
there appears to be no point in doing another one
when we add/remove XDP.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ring size is small (<32 entries) making buffers smaller means a
full ring might not be able to hold enough buffers to fit a single large
packet.
Make sure a ring full of buffers is large enough to allow at least one
packet of max size.
Fixes: 2613af0ed1 ("virtio_net: migrate mergeable rx buffers to page frag allocators")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need to align length to any particular
value anymore. Aligning to L1 cache size probably
sill makes sense to reduce false sharing.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The ibm,powerpc-cpu-features device tree binding describes CPU features with
ASCII names and extensible compatibility, privilege, and enablement metadata
that allows improved flexibility and compatibility with new hardware.
The interface is described in detail in ibm,powerpc-cpu-features.txt in this
patch.
Currently this code is not enabled by default, and there are no released
firmwares that provide the binding.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use time_after() for time comparison with the new fix.
Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of a direct cross-type cast, use conatiner_of() to locate
the embedded structure, even in the face of future struct layout
randomization.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we assume that if the cpu_spec has a pvr_mask then it must also have a
cpu_name. But that will change in a subsequent commit when we do CPU feature
discovery via the device tree, so check explicitly if cpu_name is NULL.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce primitives for FDT parsing. These will be used for powerpc
cpufeatures node scanning, which has quite complex structure but should
be processed early.
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Freescale updates from Scott:
"Includes a fix for a powerpc/next mm regression on 64e, a fix for a
kernel hang on 64e when using a debugger inside a relocated kernel, a
qman fix, and misc qe improvements."
Changes include:
- A fix related to the 32-bit idmap stub
- A fix to the bitmask used to deode the operands of an AArch32 CP
instruction
- We have moved the files shared between arch/arm/kvm and
arch/arm64/kvm to virt/kvm/arm
- We add support for saving/restoring the virtual ITS state to
userspace
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZEZihAAoJEEtpOizt6ddyGDYH/jmGjDMnryORn2P2o10dUQKJ
RnHTQYnpOYqnprlkFtZFpmK+mjl/a8R1Btb7GK2EwmovTR95pMYPRqtrCTOL0aQA
4OToh7+vFGatwxsGCS6utazdhmx0UT/LhO/GEF4G1zOb7eVa4ZtS1NKLP2WjPD1E
RU3Qn8wa0pESv3tJScv8qo2+PWVX4krbFllhY2Hk0AkVQcI66ExkdVq4ikm1eUXn
rxzIayLG2bv3KEPNCzozdwoY9tDL+b40q6vN/RHGJmM05SZbbSx2/Bkw2RbslSpD
2hvhHWX7xeuEBcd5mZO7sP4WS3hM/BI8eX7q+uMeNJ9B+nM82yjGfOTtglVi2cc=
=JfvQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.12-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
Second round of KVM/ARM Changes for v4.12.
Changes include:
- A fix related to the 32-bit idmap stub
- A fix to the bitmask used to deode the operands of an AArch32 CP
instruction
- We have moved the files shared between arch/arm/kvm and
arch/arm64/kvm to virt/kvm/arm
- We add support for saving/restoring the virtual ITS state to
userspace
When failing to restore the ITT for a DTE, we should remove the failed
device entry from the list and free the object.
We slightly refactor vgic_its_destroy to be able to reuse the now
separate vgic_its_free_dte() function.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The only reason we called kvm_vgic_map_resources() when restoring the
ITS tables was because we wanted to have the KVM iodevs registered in
the KVM IO bus framework at the time when the ITS was restored such that
a restored and active device can inject MSIs prior to otherwise calling
kvm_vgic_map_resources() from the first run of a VCPU.
Since we now register the KVM iodevs for the redestributors and ITS as
soon as possible (when setting the base addresses), we no longer need
this call and kvm_vgic_map_resources() is again called only when first
running a VCPU.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
We have to register the ITS iodevice before running the VM, because in
migration scenarios, we may be restoring a live device that wishes to
inject MSIs before the VCPUs have started.
All we need to register the ITS io device is the base address of the
ITS, so we can simply register that when the base address of the ITS is
set.
[ Code to fix concurrency issues when setting the ITS base address and
to fix the undef base address check written by Marc Zyngier ]
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
The its->initialized doesn't bring much to the table, and creates
unnecessary ordering between setting the address and initializing it
(which amounts to exactly nothing).
Let's kill it altogether, making KVM_DEV_ARM_VGIC_CTRL_INIT the no-op
it deserves to be.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Instead of waiting with registering KVM iodevs until the first VCPU is
run, we can actually create the iodevs when the redist base address is
set. The only downside is that we must now also check if we need to do
this for VCPUs which are created after creating the VGIC, because there
is no enforced ordering between creating the VGIC (and setting its base
addresses) and creating the VCPUs.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
As we are about to handle setting the address for the redistributor base
region separately from some of the other base addresses, let's rework
this function to leave a little more room for being flexible in what
each type of base address does.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
As we are about to fiddle with the IO device registration mechanism,
let's be a little more careful when setting base addresses as early as
possible. When setting a base address, we can check that there's
address space enough for its scope and when the last of the two
base addresses (dist and redist) get set, we can also check if the
regions overlap at that time.
This allows us to provide error messages to the user at time when trying
to set the base address, as opposed to later when trying to run the VM.
To do this, we make vgic_v3_check_base available in the core vgic-v3
code as well as in the other parts of the GICv3 code, namely the MMIO
config code.
We also return true for undefined base addresses so that the function
can be used before all base addresses are set; all callers already check
for uninitialized addresses before calling this function.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Split out the function to register all the redistributor iodevs into a
function that handles a single redistributor at a time in preparation
for being able to call this per VCPU as these get created.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
There are occasional needs to use the index of vcpu in the kvm->vcpus
array to map something related to a VCPU. For example, unlike the
vcpu->vcpu_id, the vcpu index is guaranteed to not be sparse across all
vcpus which is useful when allocating a memory area for each vcpu.
Signed-off-by: Christoffer Dall <cdall@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Advertise the PML bit in vmcs12 but don't try to enable
it in hardware when running L2 since L0 is emulating it. Also,
preserve L0's settings for PML since it may still
want to log writes.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With EPT A/D enabled, processor access to L2 guest
paging structures will result in a write violation.
When this happens, write the GUEST_PHYSICAL_ADDRESS
to the pml buffer provided by L1 if the access is
write and the dirty bit is being set.
This patch also adds necessary checks during VMEntry if L1
has enabled PML. If the PML index overflows, we change the
exit reason and run L1 to simulate a PML full event.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM updates accessed/dirty bits, this hook can be used
to invoke an arch specific function that implements/emulates
dirty logging such as PML.
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the SDM, the CR3-target count must not be greater than
4. Future processors may support a different number of CR3-target
values. Software should read the VMX capability MSR IA32_VMX_MISC to
determine the number of values supported.
Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Kristina Martsenko
Linus Torvalds
Dan Williams
David S. Miller
Mintz, Yuval
Ram Amrani
Suddarsana Reddy Kalluru
Jack Morgenstein
Talat Batheesh
Kamal Heib
Christian Borntraeger
Colin Ian King
Dan Carpenter
Michael S. Tsirkin
Cornelia Huck
Nicholas Piggin
Karim Eshapa
Kees Cook
Michael Ellerman
Paolo Bonzini
Christoffer Dall
Marc Zyngier
Bandan Das
Jim Mattson