Граф коммитов

329 Коммитов

Автор SHA1 Сообщение Дата
Steve French ff1c038add Check SMB3 dialects against downgrade attacks
When we are running SMB3 or SMB3.02 connections which are signed
we need to validate the protocol negotiation information,
to ensure that the negotiate protocol response was not tampered with.

Add the missing FSCTL which is sent at mount time (immediately after
the SMB3 Tree Connect) to validate that the capabilities match
what we think the server sent.

"Secure dialect negotiation is introduced in SMB3 to protect against
man-in-the-middle attempt to downgrade dialect negotiation.
The idea is to prevent an eavesdropper from downgrading the initially
negotiated dialect and capabilities between the client and the server."

For more explanation see 2.2.31.4 of MS-SMB2 or
http://blogs.msdn.com/b/openspecification/archive/2012/06/28/smb3-secure-dialect-negotiation.aspx

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-19 23:52:54 -06:00
Steve French de9f68df67 [CIFS] Set copychunk defaults
Patch 2 of the copy chunk series (the final patch will
use these to handle copies of files larger than the chunk size.

We set the same defaults that Windows and Samba expect for
CopyChunk.

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
2013-11-15 15:27:22 -06:00
Steve French 41c1358e91 CIFS: SMB2/SMB3 Copy offload support (refcopy) phase 1
This first patch adds the ability for us to do a server side copy
(ie fast copy offloaded to the server to perform, aka refcopy)

"cp --reflink"

of one file to another located on the same server.  This
is much faster than traditional copy (which requires
reading and writing over the network and extra
memcpys).

This first version is not going to be copy
files larger than about 1MB (to Samba) until I add
support for multiple chunks and for autoconfiguring
the chunksize.

It includes:
1) processing of the ioctl
2) marshalling and sending the SMB2/SMB3 fsctl over the network
3) simple parsing of the response

It does not include yet (these will be in followon patches to come soon):
1) support for multiple chunks
2) support for autoconfiguring and remembering the chunksize
3) Support for the older style copychunk which Samba 4.1 server supports
(because this requires write permission on the target file, which
cp does not give you, apparently per-posix).  This may require
a distinct tool (other than cp) and other ioctl to implement.

Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-14 00:05:36 -06:00
Pavel Shilovsky eb85d94bdd CIFS: Fix symbolic links usage
Now we treat any reparse point as a symbolic link and map it to a Unix
one that is not true in a common case due to many reparse point types
supported by SMB servers.

Distinguish reparse point types into two groups:
1) that can be accessed directly through a reparse point
(junctions, deduplicated files, NFS symlinks);
2) that need to be processed manually (Windows symbolic links, DFS);

and map only Windows symbolic links to Unix ones.

Cc: <stable@vger.kernel.org>
Acked-by: Jeff Layton <jlayton@redhat.com>
Reported-and-tested-by: Joao Correia <joaomiguelcorreia@gmail.com>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-11 16:31:03 -06:00
Steven French af6a12ea8d Query File System Alignment
In SMB3 it is now possible to query the file system
alignment info, and the preferred (for performance)
sector size and whether the underlying disk
has no seek penalty (like SSD).

Query this information at mount time for SMB3,
and make it visible in /proc/fs/cifs/DebugData
for debugging purposes.

This alignment information and preferred sector
size info will be helpful for the copy offload
patches to setup the right chunks in the CopyChunk
requests.   Presumably the knowledge that the
underlying disk is SSD could also help us
make better readahead and writebehind
decisions (something to look at in the future).

Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02 12:52:41 -05:00
Tim Gardner 3d378d3fd8 cifs: Make big endian multiplex ID sequences monotonic on the wire
The multiplex identifier (MID) in the SMB header is only
ever used by the client, in conjunction with PID, to match responses
from the server. As such, the endianess of the MID is not important.
However, When tracing packet sequences on the wire, protocol analyzers
such as wireshark display MID as little endian. It is much more informative
for the on-the-wire MID sequences to match debug information emitted by the
CIFS driver.  Therefore, one should write and read MID in the SMB header
assuming it is always little endian.

Observed from wireshark during the protocol negotiation
and session setup:

        Multiplex ID: 256
        Multiplex ID: 256
        Multiplex ID: 512
        Multiplex ID: 512
        Multiplex ID: 768
        Multiplex ID: 768

After this patch on-the-wire MID values begin at 1 and increase monotonically.

Introduce get_next_mid64() for the internal consumers that use the full 64 bit
multiplex identifier.

Introduce the helpers get_mid() and compare_mid() to make the endian
translation clear.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Tim Gardner <timg@tpi.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-11-02 12:51:53 -05:00
Steve French 64a5cfa6db Allow setting per-file compression via SMB2/3
Allow cifs/smb2/smb3 to return whether or not a file is compressed
via lsattr, and allow SMB2/SMB3 to set the per-file compression
flag ("chattr +c filename" on an smb3 mount).

Windows users often set the compressed flag (it can be
done from the desktop and file manager).  David Disseldorp
has patches to Samba server to support this (at least on btrfs)
which are complementary to this

Signed-off-by: Steve French <smfrench@gmail.com>
2013-10-28 09:22:31 -05:00
Jim McDonough 74d290da47 [CIFS] Provide sane values for nlink
Since we don't get info about the number of links from the readdir
linfo levels, stat() will return 0 for st_nlink, and in particular,
samba re-exported shares will show directories as files (as samba is
keying off st_nlink before evaluating how to set the dos modebits)
when doing a dir or ls.

Copy nlink to the inode, unless it wasn't provided.  Provide
sane values if we don't have an existing one and none was provided.

Signed-off-by: Jim McDonough <jmcd@samba.org>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-21 10:36:10 -05:00
Jeff Layton 9ae6cf606a cifs: stop trying to use virtual circuits
Currently, we try to ensure that we use vcnum of 0 on the first
established session on a connection and then try to use a different
vcnum on each session after that.

This is a little odd, since there's no real reason to use a different
vcnum for each SMB session. I can only assume there was some confusion
between SMB sessions and VCs. That's somewhat understandable since they
both get created during SESSION_SETUP, but the documentation indicates
that they are really orthogonal. The comment on max_vcs in particular
looks quite misguided. An SMB session is already uniquely identified
by the SMB UID value -- there's no need to again uniquely ID with a
VC.

Furthermore, a vcnum of 0 is a cue to the server that it should release
any resources that were previously held by the client. This sounds like
a good thing, until you consider that:

a) it totally ignores the fact that other programs on the box (e.g.
smbclient) might have connections established to the server. Using a
vcnum of 0 causes them to get kicked off.

b) it causes problems with NAT. If several clients are connected to the
same server via the same NAT'ed address, whenever one connects to the
server it kicks off all the others, which then reconnect and kick off
the first one...ad nauseum.

I don't see any reason to ignore the advice in "Implementing CIFS" which
has a comprehensive treatment of virtual circuits. In there, it states
"...and contrary to the specs the client should always use a VcNumber of
one, never zero."

Have the client just use a hardcoded vcnum of 1, and stop abusing the
special behavior of vcnum 0.

Reported-by: Sauron99@gmx.de <sauron99@gmx.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Volker Lendecke <vl@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-18 10:23:44 -05:00
Pavel Shilovsky 42873b0a28 CIFS: Respect epoch value from create lease context v2
that force a client to purge cache pages when a server requests it.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09 22:52:18 -05:00
Pavel Shilovsky b5c7cde3fa CIFS: Move parsing lease buffer to ops struct
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09 22:52:11 -05:00
Pavel Shilovsky a41a28bda9 CIFS: Move creating lease buffer to ops struct
to make adding new types of lease buffers easier.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09 22:52:08 -05:00
Pavel Shilovsky 53ef1016fd CIFS: Store lease state itself rather than a mapped oplock value
and separate smb20_operations struct.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-09 22:52:05 -05:00
Pavel Shilovsky 18cceb6a78 CIFS: Replace clientCanCache* bools with an integer
that prepare the code to handle different types of SMB2 leases.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 17:49:17 -05:00
Shirish Pargaonkar 32811d242f cifs: Start using per session key for smb2/3 for signature generation
Switch smb2 code to use per session session key and smb3 code to
    use per session signing key instead of per connection key to
    generate signatures.

    For that, we need to find a session to fetch the session key to
    generate signature to match for every request and response packet.

    We also forgo checking signature for a session setup response
    from the server.

Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:47:50 -05:00
Shirish Pargaonkar 5c234aa5e3 cifs: Add a variable specific to NTLMSSP for key exchange.
Add a variable specific to NTLMSSP authentication to determine
whether to exchange keys during negotiation and authentication phases.

Since session key for smb1 is per smb connection, once a very first
sesion is established, there is no need for key exchange during
subsequent session setups. As a result, smb1 session setup code sets this
variable as false.

Since session key for smb2 and smb3 is per smb connection, we need to
exchange keys to generate session key for every sesion being established.
As a result, smb2/3 session setup code sets this variable as true.

Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:47:49 -05:00
Scott Lovenberg cdf1246ffb cifs: Move and expand MAX_SERVER_SIZE definition
MAX_SERVER_SIZE has been moved to cifs_mount.h and renamed
CIFS_NI_MAXHOST for clarity.  It has been expanded to 1024 as the
previous value of 16 was very short.

Signed-off-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:34:22 -05:00
Scott Lovenberg 8c3a2b4c42 cifs: Move string length definitions to uapi
The max string length definitions for user name, domain name, password,
and share name have been moved into their own header file in uapi so the
mount helper can use autoconf to define them instead of keeping the
kernel side and userland side definitions in sync manually.  The names
have also been standardized with a "CIFS" prefix and "LEN" suffix.

Signed-off-by: Scott Lovenberg <scott.lovenberg@gmail.com>
Reviewed-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:34:11 -05:00
Pavel Shilovsky b42bf88828 CIFS: Implement follow_link for SMB2
that allows to access files through symlink created on a server.

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-09-08 14:27:34 -05:00
Steve French 1b244081af Do not attempt to do cifs operations reading symlinks with SMB2
When use of symlinks is enabled (mounting with mfsymlinks option) to
non-Samba servers, we always tried to use cifs, even when we
were mounted with SMB2 or SMB3, which causes the server to drop the
network connection.

This patch separates out the protocol specific operations for cifs from
the code which recognizes symlinks, and fixes the problem where
with SMB2 mounts we attempt cifs operations to open and read
symlinks.  The next patch will add support for SMB2 for opening
and reading symlinks.  Additional followon patches will address
the similar problem creating symlinks.

Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-30 23:54:45 -05:00
Chen Gang 057d6332b2 cifs: extend the buffer length enought for sprintf() using
For cifs_set_cifscreds() in "fs/cifs/connect.c", 'desc' buffer length
is 'CIFSCREDS_DESC_SIZE' (56 is less than 256), and 'ses->domainName'
length may be "255 + '\0'".

The related sprintf() may cause memory overflow, so need extend related
buffer enough to hold all things.

It is also necessary to be sure of 'ses->domainName' must be less than
256, and define the related macro instead of hard code number '256'.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Reviewed-by: Scott Lovenberg <scott.lovenberg@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-07-30 23:54:40 -05:00
Pavel Shilovsky 9cbc0b7339 CIFS: Reconnect durable handles for SMB2
On reconnects, we need to reopen file and then obtain all byte-range
locks held by the client. SMB2 protocol provides feature to make
this process atomic by reconnecting to the same file handle
with all it's byte-range locks. This patch adds this capability
for SMB2 shares.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-07-10 13:08:40 -05:00
Pavel Shilovsky 226730b4d8 CIFS: Introduce cifs_open_parms struct
and pass it to the open() call.

Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steven French <steven@steven-GA-970A-DS3.(none)>
2013-07-10 13:08:40 -05:00
Jeff Layton 50285882fd cifs: fix SMB2 signing enablement in cifs_enable_signing
Commit 9ddec56131 (cifs: move handling of signed connections into
separate function) broke signing on SMB2/3 connections. While the code
to enable signing on the connections was very similar between the two,
the bits that get set in the sec_mode are different.

Declare a couple of new smb_version_values fields and set them
appropriately for SMB1 and SMB2/3. Then change cifs_enable_signing to
use those instead.

Reported-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-27 23:42:18 -05:00
Steve French e65a5cb417 [CIFS] Fix build warning
Fix build warning in Shirish's recent SMB3 signing patch
which occurs when SMB2 support is disabled in Kconfig.

fs/built-in.o: In function `cifs_setup_session':
>> (.text+0xa1767): undefined reference to `generate_smb3signingkey'

Pointed out by: automated 0-DAY kernel build testing backend
Intel Open Source Technology Center

CC: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-27 01:06:50 -05:00
Steve French 429b46f4fd [CIFS] SMB3 Signing enablement
SMB3 uses a much faster method of signing (which is also better in other ways),
AES-CMAC.  With the kernel now supporting AES-CMAC since last release, we
are overdue to allow SMB3 signing (today only CIFS and SMB2 and SMB2.1,
but not SMB3 and SMB3.1 can sign) - and we need this also for checking
secure negotation and also per-share encryption (two other new SMB3 features
which we need to implement).

This patch needs some work in a few areas - for example we need to
move signing for SMB2/SMB3 from per-socket to per-user (we may be able to
use the "nosharesock" mount option in the interim for the multiuser case),
and Shirish found a bug in the earlier authentication overhaul
(setting signing flags properly) - but those can be done in followon
patches.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-26 23:45:05 -05:00
Steve French 769ee6a402 Add ability to dipslay SMB3 share flags and capabilities for debugging
SMB3 protocol adds various optional per-share capabilities (and
SMB3.02 adds one more beyond that).  Add ability to dump
(/proc/fs/cifs/DebugData) the share capabilities and share flags to
improve debugging.

Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
2013-06-24 01:56:46 -05:00
Steve French 20b6d8b42e Add SMB3.02 dialect support
The new Windows update supports SMB3.02 dialect, a minor update to SMB3.
This patch adds support for mounting with vers=3.02

Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
2013-06-24 01:56:45 -05:00
Jeff Layton 896a8fc25b cifs: update the default global_secflags to include "raw" NTLMv2
Before this patchset, the global_secflags could only offer up a single
sectype. With the new set though we have the ability to allow different
sectypes since we sort out the one to use after talking to the server.

Change the global_secflags to allow NTLMSSP or NTLMv2 by default. If the
server sets the extended security bit in the Negotiate response, then
we'll use NTLMSSP. If it doesn't then we'll use raw NTLMv2. Mounting a
LANMAN server will still require a sec= option by default.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:44 -05:00
Jeff Layton 3f618223dc move sectype to the cifs_ses instead of TCP_Server_Info
Now that we track what sort of NEGOTIATE response was received, stop
mandating that every session on a socket use the same type of auth.

Push that decision out into the session setup code, and make the sectype
a per-session property. This should allow us to mix multiple sectypes on
a socket as long as they are compatible with the NEGOTIATE response.

With this too, we can now eliminate the ses->secFlg field since that
info is redundant and harder to work with than a securityEnum.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:44 -05:00
Jeff Layton 38d77c50b4 cifs: track the enablement of signing in the TCP_Server_Info
Currently, we determine this according to flags in the sec_mode, flags
in the global_secflags and via other methods. That makes the semantics
very hard to follow and there are corner cases where we don't handle
this correctly.

Add a new bool to the TCP_Server_Info that acts as a simple flag to tell
us whether signing is enabled on this connection or not, and fix up the
places that need to determine this to use that flag.

This is a bit weird for the SMB2 case, where signing is per-session.
SMB2 needs work in this area already though. The existing SMB2 code has
similar logic to what we're using here, so there should be no real
change in behavior. These changes should make it easier to implement
per-session signing in the future though.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:43 -05:00
Jeff Layton 1e3cc57e47 add new fields to smb_vol to track the requested security flavor
We have this to some degree already in secFlgs, but those get "or'ed" so
there's no way to know what the last option requested was. Add new fields
that will eventually supercede the secFlgs field in the cifs_ses.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:43 -05:00
Jeff Layton 28e11bd86d cifs: add new fields to cifs_ses to track requested security flavor
Currently we have the overrideSecFlg field, but it's quite cumbersome
to work with. Add some new fields that will eventually supercede it.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:43 -05:00
Jeff Layton e598d1d8fb cifs: track the flavor of the NEGOTIATE reponse
Track what sort of NEGOTIATE response we get from the server, as that
will govern what sort of authentication types this socket will support.

There are three possibilities:

LANMAN: server sent legacy LANMAN-type response

UNENCAP: server sent a newer-style response, but extended security bit
wasn't set. This socket will only support unencapsulated auth types.

EXTENDED: server sent a newer-style response with the extended security
bit set. This is necessary to support krb5 and ntlmssp auth types.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:42 -05:00
Jeff Layton 515d82ffd0 cifs: add new "Unspecified" securityEnum value
Add a new securityEnum value to cover the case where a sec= option
was not explicitly set.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-06-24 01:56:42 -05:00
Jeff Layton 281e2e7d06 cifs: remove the cifs_ses->flags field
This field is completely unused:

CIFS_SES_W9X is completely unused. CIFS_SES_LANMAN and CIFS_SES_OS2
are set but never checked. CIFS_SES_NT4 is checked, but never set.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:40 -05:00
Jeff Layton 6f709494a7 cifs: remove protocolEnum definition
The field that held this was removed quite some time ago.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:39 -05:00
Jeff Layton a0b3df5cf1 cifs: add a "nosharesock" mount option to force new sockets to server to be created
Some servers set max_vcs to 1 and actually do enforce that limit. Add a
new mount option to work around this behavior that forces a mount
request to open a new socket to the server instead of reusing an
existing one.

I'd prefer to come up with a solution that doesn't require this, so
consider this a debug patch that you can use to determine whether this
is the real problem.

Cc: Jim McDonough <jmcd@samba.org>
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2013-06-24 01:56:38 -05:00
Linus Torvalds 94f2f14234 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
 "This set of changes starts with a few small enhnacements to the user
  namespace.  reboot support, allowing more arbitrary mappings, and
  support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
  user namespace root.

  I do my best to document that if you care about limiting your
  unprivileged users that when you have the user namespace support
  enabled you will need to enable memory control groups.

  There is a minor bug fix to prevent overflowing the stack if someone
  creates way too many user namespaces.

  The bulk of the changes are a continuation of the kuid/kgid push down
  work through the filesystems.  These changes make using uids and gids
  typesafe which ensures that these filesystems are safe to use when
  multiple user namespaces are in use.  The filesystems converted for
  3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs.  The
  changes for these filesystems were a little more involved so I split
  the changes into smaller hopefully obviously correct changes.

  XFS is the only filesystem that remains.  I was hoping I could get
  that in this release so that user namespace support would be enabled
  with an allyesconfig or an allmodconfig but it looks like the xfs
  changes need another couple of days before it they are ready."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
  cifs: Enable building with user namespaces enabled.
  cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
  cifs: Convert struct cifs_sb_info to use kuids and kgids
  cifs: Modify struct smb_vol to use kuids and kgids
  cifs: Convert struct cifsFileInfo to use a kuid
  cifs: Convert struct cifs_fattr to use kuid and kgids
  cifs: Convert struct tcon_link to use a kuid.
  cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
  cifs: Convert from a kuid before printing current_fsuid
  cifs: Use kuids and kgids SID to uid/gid mapping
  cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
  cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
  cifs: Override unmappable incoming uids and gids
  nfsd: Enable building with user namespaces enabled.
  nfsd: Properly compare and initialize kuids and kgids
  nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
  nfsd: Modify nfsd4_cb_sec to use kuids and kgids
  nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
  nfsd: Convert nfsxdr to use kuids and kgids
  nfsd: Convert nfs3xdr to use kuids and kgids
  ...
2013-02-25 16:00:49 -08:00
Eric W. Biederman 64ed39dd1e cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:55 -08:00
Eric W. Biederman 3da4656504 cifs: Modify struct smb_vol to use kuids and kgids
Add two helper functions get_option_uid and get_option_gid to handle
the work of parsing uid and gids paramaters from the command line and
making kuids and kgids out of them.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:53 -08:00
Eric W. Biederman fef59fd728 cifs: Convert struct cifsFileInfo to use a kuid
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:52 -08:00
Eric W. Biederman 4a2c8cf569 cifs: Convert struct cifs_fattr to use kuid and kgids
In cifs_unix_to_basic_fattr only update the cifs_fattr with an id if
it is valid after conversion.

Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:51 -08:00
Eric W. Biederman 6d4a083205 cifs: Convert struct tcon_link to use a kuid.
Cc: Steve French <smfrench@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 07:28:50 -08:00
Pavel Shilovsky 63b7d3a41c CIFS: Don't let read only caching for mandatory byte-range locked files
If we have mandatory byte-range locks on a file we can't cache reads
because pagereading may have conflicts with these locks on the server.
That's why we should allow level2 oplocks for files without mandatory
locks only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-01-01 23:04:30 -06:00
Pavel Shilovsky ca8aa29c60 Revert "CIFS: Fix write after setting a read lock for read oplock files"
that solution has data races and can end up two identical writes to the
server: when clientCanCacheAll value can be changed during the execution
of __generic_file_aio_write.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2013-01-01 22:59:55 -06:00
Pavel Shilovsky c299dd0e2d CIFS: Fix write after setting a read lock for read oplock files
If we have a read oplock and set a read lock in it, we can't write to the
locked area - so, filemap_fdatawrite may fail with a no information for a
userspace application even if we request a write to non-locked area. Fix
this by populating the page cache without marking affected pages dirty
after a successful write directly to the server.

Also remove CONFIG_CIFS_SMB2 ifdefs because it's suitable for both CIFS
and SMB2 protocols.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-11 11:48:50 -06:00
Steve French 38107d45cf Do not send SMB2 signatures for SMB3 frames
Restructure code to make SMB2 vs. SMB3 signing a protocol
specific op.  SMB3 signing (AES_CMAC) is not enabled yet,
but this restructuring at least makes sure we don't send
an smb2 signature on an smb3 signed connection. A followon
patch will add AES_CMAC and enable smb3 signing.

Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Jeff Layton <jlayton@samba.org>
2012-12-09 19:45:45 -06:00
Steve French 1cc9bd6861 make convert_delimiter use strchr instead of open-coding it
Take advantage of accelerated strchr() on arches that support it.

Also, no caller ever passes in a NULL pointer. Get rid of the unneeded
NULL pointer check.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05 13:27:30 -06:00
Jeff Layton b979aaa177 cifs: get rid of smb_vol->UNCip and smb_vol->port
Passing this around as a string is contorted and painful. Instead, just
convert these to a sockaddr as soon as possible, since that's how we're
going to work with it later anyway.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
2012-12-05 13:27:30 -06:00